An analytical tuning method was proposed for fuzzy PID controller used in Smith predictor in order to extend its application and improve its robustness. The fuzzy PID controller was expressed as a sliding mode control...An analytical tuning method was proposed for fuzzy PID controller used in Smith predictor in order to extend its application and improve its robustness. The fuzzy PID controller was expressed as a sliding mode control. Based on Lyapunov theory, Smith predictor was analyzed in time domain. The parameters of the fuzzy PID controller can be obtained using traditional linear control theory and sliding mode control theory. The simulation experiments were implemented. The simulation results show that the control performance, robustness and stability of the fuzzy PID controller are better than those of the PID controller in Smith predictor.展开更多
Shape memory alloy （SMA） actuator is a potential advanced component for servo- systems of aerospace vehicles and aircraft. This paper presents a joint with two degrees of freedom （DOF） and a mobility range close t...Shape memory alloy （SMA） actuator is a potential advanced component for servo- systems of aerospace vehicles and aircraft. This paper presents a joint with two degrees of freedom （DOF） and a mobility range close to ±60° when driven by SMA triple wires. The fuzzy proportional-integral-derivative （PID）-controlled actuator drive was designed using antagonistic SMA triple wires, and the resistance feedback signal made a closed loop. Experiments showed that, with the driving responding frequency increasing, the overstress became harder to be avoided at the position under the maximum friction force. Furthermore, the hysteresis gap between the heating and cooling paths of the strain-to-resistance curve expanded under this condition. A fuzzy logic control was considered as a solution, and the curves of the wires were then modeled by fitting polynomials so that the measured resistance was used directly to determine the control signal. Accurate control was demonstrated through the step response, and the experimental results showed that under the fuzzy PID-control program, the mean absolute error （MAE） of the rotation angle was about 3.147°. In addition, the investigation of the external interference to the system proved the controllable maximum output.展开更多
Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful...Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.展开更多
A multi-mode adaptive controller was proposed. The controller features in thecombination of Bang-bang and Fuzzy PID controls with state predictor. When large error exists, thecontroller operates in Bang-bang mode, oth...A multi-mode adaptive controller was proposed. The controller features in thecombination of Bang-bang and Fuzzy PID controls with state predictor. When large error exists, thecontroller operates in Bang-bang mode, otherwise it works as a fuzzy PID controller. For only fewparameters to be adjusted, the real time controlled system achieveed good stability and fastresponse. Furthermore, the introduction of state observer was also discussed to extend thecapability of the proposed controller to the plant with time-delay factors. The classical PIDcontroller and the multi-mode controller were applied to the same second-order system successively.By comparison of the simulation results, the effectiveness of the controller were shown. At last, onelectric-wire production line, this approach was practiced to control electric-wire diameter withan additive random disturbance signal. The test result further proved the effectiveness of themulti-mode controller.展开更多
A fuzzy control algorithm of asymmetric fuzzy strategy is introduced for a servo-pneumatic position system. It can effectively solve the difficult problems of single rod low friction cylinders, which are mainly caused...A fuzzy control algorithm of asymmetric fuzzy strategy is introduced for a servo-pneumatic position system. It can effectively solve the difficult problems of single rod low friction cylinders, which are mainly caused by asymmetric structures and different friction characteristics in two directions. On the basis of this algorithm, a traditional PID control is used to improve dynamic performance. Furthermore, a new asymmetric fuzzy PID control with α factor is advanced to improve the self-adaptability and robustness of the system. Both the theoretical analyses and experimental results prove that, with this control strategy, the dynamic performance of the system can be greatly improved. The system using this control algorithm has strong robustness and it obtains desired overshoot and repeatability in both transient and steady-state responses.展开更多
Based on Matlab/Simulink and Fuzzy Logic toolboxes, the altitude control system is designed and simulated. The validity of conventional PID control method and adaptive fuzzy PID control method is compared. It can be d...Based on Matlab/Simulink and Fuzzy Logic toolboxes, the altitude control system is designed and simulated. The validity of conventional PID control method and adaptive fuzzy PID control method is compared. It can be drawn out that the adaptive fuzzy PID control method is superior to the conventional PID in rising time and overshoot etc. The effectiveness of a fuzzy PID controller shows potential application in the future, especially in the presence of model uncertainty or changing dynamics and time-varying parameters.展开更多
In order to improve the yaw stability of the vehicle with active front steering system, an adaptive PID-type fuzzy control scheme is designed to make the yaw rate tracking the desired values as close as possible. A 2-...In order to improve the yaw stability of the vehicle with active front steering system, an adaptive PID-type fuzzy control scheme is designed to make the yaw rate tracking the desired values as close as possible. A 2-DOF vehicle model with active front steering is built firstly, and then the fuzzy PID controller is designed in detail. The simulation investigations of the yaw stability with different steering ma- neuvers are performed. The simulation results show the effectiveness of the fuzzy PID controller for improving the vehicle＇s yaw stability.展开更多
This paper presented PSS （Power system stabilizer） design based on Genetic Algorithm - Fuzzy PID （Proportional Integral and derivative） or GAFPID. GAFPID based PSS design is considered for multimachine power syste...This paper presented PSS （Power system stabilizer） design based on Genetic Algorithm - Fuzzy PID （Proportional Integral and derivative） or GAFPID. GAFPID based PSS design is considered for multimachine power system. The main motivation for this design is to stabilize or to control low-fi＇equency oscillation and terminal voltage of power systems. Genetic Algorithm （GA） is employed for the optimization of the parameter of stabilizer. By minimizing an objective function in which the oscillatory speed deviation of the generator, small signal and large signal performance of the system is improved. The effectiveness of the proposed PSS in increasing the damping of system electromechanical oscillation is demonstrated in a simple two-area power system.展开更多
Considering gravity change from ground alignment to space applications, a fuzzy proportional-integral-differential(PID)control strategy is proposed to make the space manipulator track the desired trajectories in diffe...Considering gravity change from ground alignment to space applications, a fuzzy proportional-integral-differential(PID)control strategy is proposed to make the space manipulator track the desired trajectories in different gravity environments. The fuzzy PID controller is developed by combining the fuzzy approach with the PID control method, and the parameters of the PID controller can be adjusted on line based on the ability of the fuzzy controller. Simulations using the dynamic model of the space manipulator have shown the effectiveness of the algorithm in the trajectory tracking problem. Compared with the results of conventional PID control,the control performance of the fuzzy PID is more effective for manipulator trajectory control.展开更多
The welding wire feed mechanism is an important component of welding equipment, both reliability and stabilization are the premise that the welding quality can be ensured. The PID is currently adapted to control the w...The welding wire feed mechanism is an important component of welding equipment, both reliability and stabilization are the premise that the welding quality can be ensured. The PID is currently adapted to control the welding wire feed mechanism, although the fuzzy PID has advantage of fast response and adaptation, the precision of fuzzy PID is lower. Accordingly, the fuzzy self-adaptive PID controller was proposed through changing fuzzy input variables and output variables based on variable universe, simple furwtion is adopted as scaling factor, the fuzzy PID controller parameters are adjusted to improve the precision and adjustment range. Simulation results show that control effects of fuzzy self-adaptive PID adopted by the welding wire feed mechanism have good adaptive ability and robustness based on variable universe, the welding experiments indicate that the welding quality met the requirements actually.展开更多
The omnidirectional mobile platform has three degrees of freedom that make it widely applicable to all areas of industry, while the Mecanum wheel has the disadvantages wheel omnidirectional mobile platform is always d...The omnidirectional mobile platform has three degrees of freedom that make it widely applicable to all areas of industry, while the Mecanum wheel has the disadvantages wheel omnidirectional mobile platform is always difficult in of large vibration, the trajectory precision of Mecanum the omnidirectional mobile platform. To control the trajectory of the omnidirectional mobile platform better, this paper proposes a fuzzy self-tuning PID control model, through establishing the motion model of omnidirectional mobile platform in Adams software, then combined with Simulink simulation, analysis of fuzzy PID controller to improve the accuracy of the speed control of omnidirectional mobile platform, improve the control method of a precise trajectory of the omnidirectional mobile platform motion.展开更多
During flight operations,quadrotor UAVs are susceptible to interference from environmental factors such as wind gusts,battery depletion,and obstacles,which may compromise flight stability.This study proposes a fuzzy a...During flight operations,quadrotor UAVs are susceptible to interference from environmental factors such as wind gusts,battery depletion,and obstacles,which may compromise flight stability.This study proposes a fuzzy adaptive PID controller(Fuzzy PID)combining PID control with fuzzy logic to achieve self-adaptive adjustment of PID parameters in UAV flight control systems,thereby enhancing system robustness.A quadrotor UAV control model was developed in Simulink,and a Fuzzy PID control system was constructed by integrating fuzzy control logic for simulation and experimental validation.Test results demonstrate that UAVs governed by Fuzzy PID control exhibit faster regulation speed and improved stability when subjected to disturbances.展开更多
Live fish waterless transportation could be recognized as an essential supplement for water-based transportation due to its low oxygen consumption and less waste water pollution.The critical problem to maintaining the...Live fish waterless transportation could be recognized as an essential supplement for water-based transportation due to its low oxygen consumption and less waste water pollution.The critical problem to maintaining the fish survival quality under such a unique transport strategy is accurately controlling the oxygen concentration in the container to be constantly at stable and high levels.This paper aims to propose an improved fuzzy PID control system based on the grey model with residual rectification by improved particle swarm optimized Gated Recurrent Unit(GM-IPSO-GRU)to realize advanced oxygen level control.In addition,it is also reinforced by adopting the improved grey wolf optimization(IGWO)for the majorization of control parameters(quantization factors,scale factors)with full consideration of fish size features.In this study,Turbot(Scophthalmus maximus)is taken as the test subject to verify the integrated control performance of the optimized fuzzy PID controller through simulated waterless live transportation under lowtemperature conditions.The proposed control system is validated as more efficient than the traditional proportional integral derivative(PID)and fuzzy PID algorithms for handling its nonlinear,time-varying,and time lag problems well.In summary,the control group experiment shows that the newly-designed control system has the advantages of shorter stabilization time,minor overshoot,and strong anti-interference ability for oxygen level adjustment.Finally,applying this novel control technology can effectively improve oxygen adjustment efficiency and provide feasible quality control support for the deep optimization of the live fish circulation industry.展开更多
Aiming at the problem of poor uniformity of maize sowing caused by ground wheel slip,an electronic control seed-metering system(ECSMS)for maize single seed precision sowing was designed and a mathematical model for mo...Aiming at the problem of poor uniformity of maize sowing caused by ground wheel slip,an electronic control seed-metering system(ECSMS)for maize single seed precision sowing was designed and a mathematical model for motor control of the ECSMS was determined.The PID parameters were set by Z-N method and fuzzy control.The fuzzy PID control design and Simulink simulation were completed by MATLAB,which reduced response time of the system by 0.23 s and improved the control accuracy.Experiments on the JPS-12 test bench show that the qualification index(QI)of maize seed-metering device with the ECSMS increases by 4.47%,the multiples index(MI)decreases by 1.96%,the miss index(MIX)decreases by 2.81%,and the coefficient of variation(CV)of qualified seed spacing decreases by 5.06%,and the sowing uniformity has been greatly improved.Test results of the soil-tank test bench show that the system has good sowing uniformity and stability.And the QI is 96.74%,the MI is 2.15%,the MIX is 1.10%,and the CV of qualified seed spacing is 16.24%.Under different setting seed spacing and different sowing operation speed,the change range of seeding quality index was within 10%.The results of field sowing test show that the QI was 84.21%,the MI was 2.63%,the MIX was 7.89%,and the CV of qualified seed spacing was 22.15%,which meet the requirements of JB/T 10293-2013‘Specification for single seed planters(precision planters)’and the agronomic requirements for maize precision sowing.The system runs stably and reliably in practical operation and has good operation performance.展开更多
基金Project(70473068) supported by the National Natural Science Foundation of ChinaProject(05JZD00024) supported by the Major Subject of Ministry of Education, China
文摘An analytical tuning method was proposed for fuzzy PID controller used in Smith predictor in order to extend its application and improve its robustness. The fuzzy PID controller was expressed as a sliding mode control. Based on Lyapunov theory, Smith predictor was analyzed in time domain. The parameters of the fuzzy PID controller can be obtained using traditional linear control theory and sliding mode control theory. The simulation experiments were implemented. The simulation results show that the control performance, robustness and stability of the fuzzy PID controller are better than those of the PID controller in Smith predictor.
基金co-supported by the National Natural Science Foundation of China (61175104)National Science and Technology Support Program of China (2012BA114B01)
文摘Shape memory alloy （SMA） actuator is a potential advanced component for servo- systems of aerospace vehicles and aircraft. This paper presents a joint with two degrees of freedom （DOF） and a mobility range close to ±60° when driven by SMA triple wires. The fuzzy proportional-integral-derivative （PID）-controlled actuator drive was designed using antagonistic SMA triple wires, and the resistance feedback signal made a closed loop. Experiments showed that, with the driving responding frequency increasing, the overstress became harder to be avoided at the position under the maximum friction force. Furthermore, the hysteresis gap between the heating and cooling paths of the strain-to-resistance curve expanded under this condition. A fuzzy logic control was considered as a solution, and the curves of the wires were then modeled by fitting polynomials so that the measured resistance was used directly to determine the control signal. Accurate control was demonstrated through the step response, and the experimental results showed that under the fuzzy PID-control program, the mean absolute error （MAE） of the rotation angle was about 3.147°. In addition, the investigation of the external interference to the system proved the controllable maximum output.
基金Project(51090385) supported by the National Natural Science Foundation of ChinaProject(2001IB001) supported by Yunnan Provincial Science and Technology Fund, China
文摘Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.
基金This research was financially supported by the Open Fund of the Fieldbus tech& Automation Beijing Key Lab (No.2002.19-21).
文摘A multi-mode adaptive controller was proposed. The controller features in thecombination of Bang-bang and Fuzzy PID controls with state predictor. When large error exists, thecontroller operates in Bang-bang mode, otherwise it works as a fuzzy PID controller. For only fewparameters to be adjusted, the real time controlled system achieveed good stability and fastresponse. Furthermore, the introduction of state observer was also discussed to extend thecapability of the proposed controller to the plant with time-delay factors. The classical PIDcontroller and the multi-mode controller were applied to the same second-order system successively.By comparison of the simulation results, the effectiveness of the controller were shown. At last, onelectric-wire production line, this approach was practiced to control electric-wire diameter withan additive random disturbance signal. The test result further proved the effectiveness of themulti-mode controller.
文摘A fuzzy control algorithm of asymmetric fuzzy strategy is introduced for a servo-pneumatic position system. It can effectively solve the difficult problems of single rod low friction cylinders, which are mainly caused by asymmetric structures and different friction characteristics in two directions. On the basis of this algorithm, a traditional PID control is used to improve dynamic performance. Furthermore, a new asymmetric fuzzy PID control with α factor is advanced to improve the self-adaptability and robustness of the system. Both the theoretical analyses and experimental results prove that, with this control strategy, the dynamic performance of the system can be greatly improved. The system using this control algorithm has strong robustness and it obtains desired overshoot and repeatability in both transient and steady-state responses.
基金Sponsored by the Ministerial Level Foundation(K130506)
文摘Based on Matlab/Simulink and Fuzzy Logic toolboxes, the altitude control system is designed and simulated. The validity of conventional PID control method and adaptive fuzzy PID control method is compared. It can be drawn out that the adaptive fuzzy PID control method is superior to the conventional PID in rising time and overshoot etc. The effectiveness of a fuzzy PID controller shows potential application in the future, especially in the presence of model uncertainty or changing dynamics and time-varying parameters.
基金Supported by the National Natural Science Foundation of China （No.50705008）
文摘In order to improve the yaw stability of the vehicle with active front steering system, an adaptive PID-type fuzzy control scheme is designed to make the yaw rate tracking the desired values as close as possible. A 2-DOF vehicle model with active front steering is built firstly, and then the fuzzy PID controller is designed in detail. The simulation investigations of the yaw stability with different steering ma- neuvers are performed. The simulation results show the effectiveness of the fuzzy PID controller for improving the vehicle＇s yaw stability.
文摘This paper presented PSS （Power system stabilizer） design based on Genetic Algorithm - Fuzzy PID （Proportional Integral and derivative） or GAFPID. GAFPID based PSS design is considered for multimachine power system. The main motivation for this design is to stabilize or to control low-fi＇equency oscillation and terminal voltage of power systems. Genetic Algorithm （GA） is employed for the optimization of the parameter of stabilizer. By minimizing an objective function in which the oscillatory speed deviation of the generator, small signal and large signal performance of the system is improved. The effectiveness of the proposed PSS in increasing the damping of system electromechanical oscillation is demonstrated in a simple two-area power system.
基金supported by National High Technology Research and Development Program of China(863 Program)(No.2011AA)
文摘Considering gravity change from ground alignment to space applications, a fuzzy proportional-integral-differential(PID)control strategy is proposed to make the space manipulator track the desired trajectories in different gravity environments. The fuzzy PID controller is developed by combining the fuzzy approach with the PID control method, and the parameters of the PID controller can be adjusted on line based on the ability of the fuzzy controller. Simulations using the dynamic model of the space manipulator have shown the effectiveness of the algorithm in the trajectory tracking problem. Compared with the results of conventional PID control,the control performance of the fuzzy PID is more effective for manipulator trajectory control.
文摘The welding wire feed mechanism is an important component of welding equipment, both reliability and stabilization are the premise that the welding quality can be ensured. The PID is currently adapted to control the welding wire feed mechanism, although the fuzzy PID has advantage of fast response and adaptation, the precision of fuzzy PID is lower. Accordingly, the fuzzy self-adaptive PID controller was proposed through changing fuzzy input variables and output variables based on variable universe, simple furwtion is adopted as scaling factor, the fuzzy PID controller parameters are adjusted to improve the precision and adjustment range. Simulation results show that control effects of fuzzy self-adaptive PID adopted by the welding wire feed mechanism have good adaptive ability and robustness based on variable universe, the welding experiments indicate that the welding quality met the requirements actually.
文摘The omnidirectional mobile platform has three degrees of freedom that make it widely applicable to all areas of industry, while the Mecanum wheel has the disadvantages wheel omnidirectional mobile platform is always difficult in of large vibration, the trajectory precision of Mecanum the omnidirectional mobile platform. To control the trajectory of the omnidirectional mobile platform better, this paper proposes a fuzzy self-tuning PID control model, through establishing the motion model of omnidirectional mobile platform in Adams software, then combined with Simulink simulation, analysis of fuzzy PID controller to improve the accuracy of the speed control of omnidirectional mobile platform, improve the control method of a precise trajectory of the omnidirectional mobile platform motion.
基金The 2023 Scientific and Technological Project in Henan Province of China(232102220098)。
文摘During flight operations,quadrotor UAVs are susceptible to interference from environmental factors such as wind gusts,battery depletion,and obstacles,which may compromise flight stability.This study proposes a fuzzy adaptive PID controller(Fuzzy PID)combining PID control with fuzzy logic to achieve self-adaptive adjustment of PID parameters in UAV flight control systems,thereby enhancing system robustness.A quadrotor UAV control model was developed in Simulink,and a Fuzzy PID control system was constructed by integrating fuzzy control logic for simulation and experimental validation.Test results demonstrate that UAVs governed by Fuzzy PID control exhibit faster regulation speed and improved stability when subjected to disturbances.
基金supported by Shandong Provincial Natural Science Foundation(Grant No.ZR2022MF244)the Institutional Applied Scientific Research Projects(2021yyx-zd02).
文摘Live fish waterless transportation could be recognized as an essential supplement for water-based transportation due to its low oxygen consumption and less waste water pollution.The critical problem to maintaining the fish survival quality under such a unique transport strategy is accurately controlling the oxygen concentration in the container to be constantly at stable and high levels.This paper aims to propose an improved fuzzy PID control system based on the grey model with residual rectification by improved particle swarm optimized Gated Recurrent Unit(GM-IPSO-GRU)to realize advanced oxygen level control.In addition,it is also reinforced by adopting the improved grey wolf optimization(IGWO)for the majorization of control parameters(quantization factors,scale factors)with full consideration of fish size features.In this study,Turbot(Scophthalmus maximus)is taken as the test subject to verify the integrated control performance of the optimized fuzzy PID controller through simulated waterless live transportation under lowtemperature conditions.The proposed control system is validated as more efficient than the traditional proportional integral derivative(PID)and fuzzy PID algorithms for handling its nonlinear,time-varying,and time lag problems well.In summary,the control group experiment shows that the newly-designed control system has the advantages of shorter stabilization time,minor overshoot,and strong anti-interference ability for oxygen level adjustment.Finally,applying this novel control technology can effectively improve oxygen adjustment efficiency and provide feasible quality control support for the deep optimization of the live fish circulation industry.
基金supported by Hebei Agriculture Research System(HBCT2024020205)The State Key Laboratory of North China Crop Improvement and Regulation(Grant No.NCCIR2024ZZ-12)+1 种基金The Sci-Tech Program of Hebei(Grant No.23567601H)The Central Government Guides Local Funds for Scientific and Technological Development(Grant No.236Z7202G).
文摘Aiming at the problem of poor uniformity of maize sowing caused by ground wheel slip,an electronic control seed-metering system(ECSMS)for maize single seed precision sowing was designed and a mathematical model for motor control of the ECSMS was determined.The PID parameters were set by Z-N method and fuzzy control.The fuzzy PID control design and Simulink simulation were completed by MATLAB,which reduced response time of the system by 0.23 s and improved the control accuracy.Experiments on the JPS-12 test bench show that the qualification index(QI)of maize seed-metering device with the ECSMS increases by 4.47%,the multiples index(MI)decreases by 1.96%,the miss index(MIX)decreases by 2.81%,and the coefficient of variation(CV)of qualified seed spacing decreases by 5.06%,and the sowing uniformity has been greatly improved.Test results of the soil-tank test bench show that the system has good sowing uniformity and stability.And the QI is 96.74%,the MI is 2.15%,the MIX is 1.10%,and the CV of qualified seed spacing is 16.24%.Under different setting seed spacing and different sowing operation speed,the change range of seeding quality index was within 10%.The results of field sowing test show that the QI was 84.21%,the MI was 2.63%,the MIX was 7.89%,and the CV of qualified seed spacing was 22.15%,which meet the requirements of JB/T 10293-2013‘Specification for single seed planters(precision planters)’and the agronomic requirements for maize precision sowing.The system runs stably and reliably in practical operation and has good operation performance.
