This work evaluated the effect of secondary bacterial metabolites produced by Pseudomonas sp LV strain in control of Lactobacillus sp. population in the microcosm of the vat during ethanol fermentation. The fraction F...This work evaluated the effect of secondary bacterial metabolites produced by Pseudomonas sp LV strain in control of Lactobacillus sp. population in the microcosm of the vat during ethanol fermentation. The fraction F4 produced by Pseudomonas aeruginosa was extracted with dichloromethane and fractionating by vacuum liquid chromatography obtained in a methanol phase. The evaluation of antibiotic activity of F4 fraction mixed or not with sulphuric acid and Kamoram?. The antibiotic activity of F4 fraction was determined as well as the fermentation efficiency. Also was determined yeast cell viability, budding formation, the viability of budding cells, and number of populations of Saccharomyces cerevisiae and Lactobacillus sp. The results showed that the F4 fraction had high selective antibiotic activity against Lactobacillus sp. but not for S. cerevisae, and no inhibitory effect was observed in the fermentation process by yeast. Also F4 fraction decreased flocculation and foam formation. The F4 has an antibiotic activity against Lactobacillus sp. and should be used as an alternative to control bacteria contamination and foam and flocculation formation in the fuel ethanol fermentation process. The F4 fraction could reduce the use of antibiotics in the control of Lactobacillus sp. population during the fuel ethanol production.展开更多
Dry land crops such as sorghums （grain sorghum, promising feedstocks for fuel ethanol production. The major issue sweet sorghum and forage sorghum） have been identified as for using the sweet sorghum as feedstock is...Dry land crops such as sorghums （grain sorghum, promising feedstocks for fuel ethanol production. The major issue sweet sorghum and forage sorghum） have been identified as for using the sweet sorghum as feedstock is its stability at room temperature. At room temperature, the sweet sorghum juice could lose from 40% to 50% of its fermentable sugars from 7 to 14 days No significant sugar content and profile changes were observed in juice stored at refrigerator temperature in two weeks. Ethanol fermentation efficiencies of fresh and frozen juice were high （-93%）. Concentrated juice （≥25% sugar） had significantly lower efficiencies and large amounts of fructose left in finished beer; however, winery yeast strains and novel fermentation techniques may solve these problems. The ethanol yield from sorghum grain increased as starch content increased. No linear relationship between starch content and fermentation efficiency was found. Key factors affecting the ethanol fermentation efficiency of sorghum include starches and protein digestibility, amylose-lipid complexes, tannin content, and mash viscosity. Life cycle analysis showed a positive net energy value （NEV） = 25 500 Btu/gal ethanol. Fourier transform infrared （FTIR） spectroscopy and X-ray diffraction （XRD） were used to determine changes in the structure and chemical composition of sorghum biomasses. Dilute sulfuric acid pretreatment was effective in removing the hemicellulose from biomasses and exposing the cellulose for enzymatic hydrolysis. Forage sorghum lignin had a lower syringyl/guaiacyl ratio and its pretreated biomass was easier to hydrolyze. Up to 72% hexose yield and 94% pentose yield were obtained by using a modified steam explosion with 2% sulfuric acid at 140℃ for 30 min and enzymatic hydrolysis with cellulase.展开更多
The Chinese government is developing biomass ethanol as one of its automobile fuels for energy security and environmental improvement reasons. The energy efficiency of the biomass-based fuel ethanol is critical issue....The Chinese government is developing biomass ethanol as one of its automobile fuels for energy security and environmental improvement reasons. The energy efficiency of the biomass-based fuel ethanol is critical issue. To investigate the energy use in the three biomass-base ethanol fuel systems, energy content approach, Market value approach and Product displacement approach methods were used to allocate the energy use based on life cycle energy assessment. The results shows that the net energy of corn based, wheat based, and cassava-based ethanol fuel are 12543MJ, 10299MJ and 13112MJ when get one ton biomassbased ethanol, respectively, and they do produce positive net energy.展开更多
Hainan Yedao (Group) Co. Ltd. plans to invest 350 million Yuan in construction of a fuel ethanol project. With cooperation of a large state-owned petrochemical enter- prise, this project is planned to produce 100 thou...Hainan Yedao (Group) Co. Ltd. plans to invest 350 million Yuan in construction of a fuel ethanol project. With cooperation of a large state-owned petrochemical enter- prise, this project is planned to produce 100 thousand展开更多
Models for hydrolysis,fermentation and concentration process,production and utilization of biogas as well as lignin gasification are developed to calculate the heat demand of ethanol production process and the amounts...Models for hydrolysis,fermentation and concentration process,production and utilization of biogas as well as lignin gasification are developed to calculate the heat demand of ethanol production process and the amounts of heat and power generated from residues and wastewater of the process.For the energy analysis,all relevant information about the process streams,physical properties,and mass and energy balances are considered.Energy integration is investigated for establishing a network of facilities for heat and power generation from wastewater and residues treatment aiming at the increase of energy efficiency.Feeding the lignin to an IGCC process,the electric efficiency is increased by 4.4% compared with combustion,which leads to an overall energy efficiency of 53.8%.A detailed sensitivity analysis on energy efficiency is also carried out.展开更多
Presently,Saccharomyces cerevisiae demonstrates proficient co-fermentation of glucose and xylose,marking a significant advancement in second-generation fuel ethanol production.However,the presence of high concen-trati...Presently,Saccharomyces cerevisiae demonstrates proficient co-fermentation of glucose and xylose,marking a significant advancement in second-generation fuel ethanol production.However,the presence of high concen-trations of inhibitors in industrial lignocellulose hydrolysates and post-glucose effect caused by glucose con-sumption hinders severely impedes yeast robustness and xylose utilization for ethanol fermentation.Even worse,the antagonism between xylose utilization ability and strain robustness was observed,which proposes a difficult challenge in the production of second-generation fuel ethanol by S.cerevisiae.This review introduces the effect of engineering transcriptional regulatory networks on enhancing xylose utilization,improving strain robustness,alleviating antagonism between xylose utilization and strain robustness,and reducing post-glucose effect.Additionally,we provide an outlook on the developmental trends in this field,offering insights into future di-rections for increasing the production of second-generation fuel ethanol in S.cerevisiae.展开更多
Direct ethanol fuel cells(DEFCs)are a promising alternative to conventional energy sources,offering high energy density,environmental sustainability,and operational safety.Compared to methanol fuel cells,DEFCs exhibit...Direct ethanol fuel cells(DEFCs)are a promising alternative to conventional energy sources,offering high energy density,environmental sustainability,and operational safety.Compared to methanol fuel cells,DEFCs exhibit lower toxicity and a more mature preparation process.Unlike hydrogen fuel cells,DEFCs provide superior storage and transport feasibility,as well as cost-effectiveness,significantly enhancing their commercial viability.However,the stable C-C bond in ethanol creates a high activation energy barrier,often resulting in incomplete electrooxidation.Current commercial platinum(Pt)-and palladium(Pd)-based catalysts demonstrate low C-C bond cleavage efficiency(<7.5%),severely limiting DEFC energy output and power density.Furthermore,high catalyst costs and insufficient activity impede large-scale commercialization.Recent advances in DEFC anode catalyst design have focused on optimizing material composition and elucidating catalytic mechanisms.This review systematically examines developments in ethanol electrooxidation catalysts over the past five years,highlighting strategies to improve C1 pathway selectivity and C-C bond activation.Key approaches,such as alloying,nanostructure engineering,and interfacial synergy effects,are discussed alongside their mechanistic implications.Finally,we outline current challenges and future prospects for DEFC commercialization.展开更多
A technology to achieve stable and high ammonia nitrogen removal rates for corn distillery wastewater （ethanol fuel production） treatment has been designed.The characteristics of nitrifying bacteria entrapped in a w...A technology to achieve stable and high ammonia nitrogen removal rates for corn distillery wastewater （ethanol fuel production） treatment has been designed.The characteristics of nitrifying bacteria entrapped in a waterborne polyurethane （WPU） gel carrier were evaluated after acclimation.In the acclimation period,nitrification rates of WPU-immobilized nitrobacteria were monitored and polymerase chain reaction （PCR） was also carried out to investigate the change in ammonium-oxidizing bacteria.The results showed that the pellet nitrification rates increased from 21 to 228 mg-N/（L-pellet·hr） and the quantity of the ammonia oxidation bacteria increased substantially during the acclimation.A continuous ammonia removal experiment with the anaerobic pond effluent of a distillery wastewater system was conducted with immobilized nitrifying bacteria for 30 days using an 80 L airlift reactor with pellets at a fill ratio of 15% （V/V）.Under the conditions of 75 mg/L influent ammonia,hydraulic retention time （HRT） of 3.7-5.6 hr,and dissolved oxygen （DO） of 4 mg/L,the effluent ammonia concentration was lower than 10 mg/L and the ammonia removal efficiency was 90%.While the highest ammonia removal rate,162 mg-N/（L-pellet·hr）,was observed when the HRT was 1.3 hr.展开更多
The sensing capability of a Tb^(3+)-metal-organic framework, based on its photoluminescence, was used for detection of methanol in ethanol fuel. It was synthesized using terbium and trimesic acid as a metal ion center...The sensing capability of a Tb^(3+)-metal-organic framework, based on its photoluminescence, was used for detection of methanol in ethanol fuel. It was synthesized using terbium and trimesic acid as a metal ion center and ligand, respectively. Powder X-ray diffraction, infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy were employed to characterize the synthesized MOF-76 structural features. According to the results, MOF-76 was successfully obtained with minor synthetic modification and its activated form(named TbTMA) was tested as a sensor for methanol. Tb^(3+) luminescence intensity increases as the methanol concentration in ethanol fuel also increases and the water content does not affect this response. Our findings indicate TbTMA as an appropriate sensor for evaluating ethanol fuel adulteration by methanol addition above the allowed limit.展开更多
Three co-impregnation/chemical reduction methods in acidic solutions of pH 〈 1,including ethylene glycol （EG）,NaBH4,and HCOOH,were compared for Pt-WO3/C catalysts.Pt-WO3/C catalysts containing 10 wt.% and 20 wt.% p...Three co-impregnation/chemical reduction methods in acidic solutions of pH 〈 1,including ethylene glycol （EG）,NaBH4,and HCOOH,were compared for Pt-WO3/C catalysts.Pt-WO3/C catalysts containing 10 wt.% and 20 wt.% platinum per carbon were prepared by the three methods; their morphology and electrocatalytic activities were characterized.The 20 wt.% Pt-WO3/C catalyst prepared by the co-impregnation/EG method presented the optimal dispersion with an average particle size of 4.6 nm and subsequently the best electrocatalytic activity,and so,it was further characterized.Its anodic peak current density for ethanol oxidation from linear sweep voltammetry （LSV） is 7.9 mA·cm^-2,which is 1.4 and 5.2 times as high as those of the catalysts prepared by co-impregnation/NaBH4 and co-impregnation/ HCOOH reduction methods,2.1 times as high as that of the 10 wt.% Pt-WO3/C catalyst prepared by co-impregnation/EG method,respectively.展开更多
To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the prepa...To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the preparation of Pt/CNTs@TiO2 and Pt-Mo/CNTs@TiO2 electrocatalysts via a UV-photoreduction method.The physicochemical characterizations of the catalysts were carried out by using X-ray diffraction （XRD）,transmission electron microscopy （TEM）,X-ray photoelectron spectroscopy （XPS）,and infrared spectroscopy of adsorbed probe ammonia molecules.The electrocatalytic properties of the catalysts for methanol oxidation were investigated by the cyclic voltammetry technique.The results show that Pt-Mo/CNTs@TiO2 electrode exhibits the highest performance in all the electrodes.It is explained that,the structure,the oxidation states,and the acid-base properties of the catalysts are influenced due to the strong interaction between Ti and Mo species by adding TiO2 and MoOx to the Pt-based catalysts.展开更多
The preparation of ethanol-diesel fuel blends and their emission characteristics were investigated. Results showed the absolute ethanol can dissolve in diesel fuel at an arbitrary ratio and a small quantity of water(0...The preparation of ethanol-diesel fuel blends and their emission characteristics were investigated. Results showed the absolute ethanol can dissolve in diesel fuel at an arbitrary ratio and a small quantity of water(0.2%) addition can lead to the phase separation of blends. An organic additive was synthesized and it can develop the ability of resistance to water and maintain the stability of ethanol-diesel-trace amounts of water system. The emission characteristics of 10%, 20%, and 30% ethanol-diesel fuel blends, with or without additives, were compared with those of diesel fuel in a direct injection(DI) diesel engine. The experimental results indicated that the blend of ethanol with diesel fuel significantly reduced the concentrations of smoke, hydrocarbon(HC), and carbon monoxide(CO) in exhaust gas. Using 20% ethanol-diesel fuel blend with the additive of 2% of the total volume, the optimum mixing ratio was achieved, at which the bench diesel engine testing showed a significant decrease in exhaust gas. Bosch smoke number was reduced by 55%, HC emission by 70%, and CO emission by 45%, at 13 kW/1540 r/min. However, ethanol-diesel fuel blends produced a few ppm acetaldehydes and more ethanol in exhaust gas.展开更多
A novel routine for removing water from ethanol by the hydration using C4 olefin cut catalyzed with the ion exchange resin was proposed. Reactive distillation experiments were carried out to demonstrate the feasibilit...A novel routine for removing water from ethanol by the hydration using C4 olefin cut catalyzed with the ion exchange resin was proposed. Reactive distillation experiments were carried out to demonstrate the feasibility of this routine. The sensitivity analysis was performed by using the software of ASPEN PLUS 10.2. The optimized operating conditions were obtained considering three objective functions which were the water content of the bottom product, water conversion rate and hydration selectivity. Under the optimized operation conditions, the final product was consisted of 45.0% of ethanol, 19.4% of ethyl tert-butyl ether, 35.1% of tert-butyl alcohol and 0.6% of water in volumetric percentage.展开更多
To evaluate the environmental, economic, energy performance of biomass ethanol fuel in China and to support the decision-making of biomass ethanol energy policy, an assessment method of life cycle 3E (economy, environ...To evaluate the environmental, economic, energy performance of biomass ethanol fuel in China and to support the decision-making of biomass ethanol energy policy, an assessment method of life cycle 3E (economy, environment, energy) was applied to the three biomass ethanol fuel cycle alternatives, which includes cassava-based, corn-based and wheat-based ethanol fuel. The assessments provide a comparison of the economical performance, energy efficiency and environmental impacts of the three alternatives. And the development potential of the three alternatives in China was examined. The results are very useful for the Chinese government to make decisions on the biomass ethanol energy policy, and some advises for the decision-making of Chinese government were given.展开更多
Biomass ethanol fuel is not only renewable but also environmental-friendly. Guangxi Zhuang Autonomous Region is developing the cassava-based ethanol fuel. Economical performance of the project is the key issue. The tr...Biomass ethanol fuel is not only renewable but also environmental-friendly. Guangxi Zhuang Autonomous Region is developing the cassava-based ethanol fuel. Economical performance of the project is the key issue. The traditional life cycle economical analysis is just a static calculation process. Uncertainty is the character of cassava yield, cost of cassava plant, cassava price, tax rate and gasoline price, and the economical performance of the project is determined by these aspects. This study proposes an economical model of cassava-based ethanol fuel. The method of Monte Carol is used to simulate the economical performance. This method conquers the shortage of the traditional way. The results show that cassava-based ethanol fuel can get survived when the tax is exempted. Finally, the study also evaluates the potential of the economical performance.展开更多
The primary barrier to the use of ethanol in diesel fuel is the poor miscibility at lower temperatures. The miscibilities of ethanol in 19 diesel fuels having a wide variation in compositions were evaluated by testin...The primary barrier to the use of ethanol in diesel fuel is the poor miscibility at lower temperatures. The miscibilities of ethanol in 19 diesel fuels having a wide variation in compositions were evaluated by testing their phase separation temperatures. The result shows that aromatic contents and intermediate distillate temperatures have a significant impact on miscibility limits. The FCC diesels, which contain up to 50% of aromatics, exhibit different phase behavior trends in comparison with straight-run diesels and other diesel fuels.展开更多
Highly active and stable electrocatalysts for ethanol oxidation reaction(EOR)are critical for the widespread adoption of direct ethanol fuel cells(DEFCs).However,the low efficiency of C–C bond cleavage of commercial ...Highly active and stable electrocatalysts for ethanol oxidation reaction(EOR)are critical for the widespread adoption of direct ethanol fuel cells(DEFCs).However,the low efficiency of C–C bond cleavage of commercial electrocatalysts not only leads to incomplete ethanol oxidation but also results in the accumulation of poisoning CO species.In this work,silver-platinum hollow nanocubes(AgPt hNCs)are designed and synthesized to achieve high selectivity for the complete 12-electron EOR in an alkaline electrolyte.AgPt h NCs demonstrate a Faradaic efficiency of up to 88.2%at the potential of 0.70 V for the C1 pathway and exhibit a 6.3-fold EOR mass activity than commercial Pt black at the potential of 0.81 V.Moreover,the oxyphilic nature of Ag imparts exceptional long-term stability to AgPt h NCs.Theoretical calculations reveal that the electronic interaction between Pt and Ag effectively modifies the d-band properties of surface Pt atoms,thereby optimizing the adsorption behavior of key intermediates,promoting the dehydrogenation of CH_(3)CO^(*)to CH_(2)CO^(*),and facilitating C–C bond cleavage.The present work provides both theoretical and experimental insights into the utilization of Ag-based alloy catalysts for highperformance DEFCs.展开更多
Pt/Ni catalysts modified with CeO2 nanoparticles were prepared by simple composite electrodeposition of Ni and CeO2,and spontaneous Ni partial replacement by Pt processes.The as-prepared CeO2-modified Pt/Ni catalysts ...Pt/Ni catalysts modified with CeO2 nanoparticles were prepared by simple composite electrodeposition of Ni and CeO2,and spontaneous Ni partial replacement by Pt processes.The as-prepared CeO2-modified Pt/Ni catalysts showed enhanced catalytic performance for ethanol electro-oxidation compared with pure Pt/Ni,and acetate species were proposed to be the main products of the oxidation when using these catalysts.The content of CeO2 in the as-prepared catalysts influenced their catalytic activity,with Pt/NiCe2（obtained from an electrolyte containing 100 mg/L CeO2 nanoparticles） exhibiting higher activity and relatively better stability in ethanol electro-oxidation.This was mainly due to the oxygen storage capacity of CeO2,the interaction between Pt and CeO2/Ni,and the relatively small contact and charge transfer resistances.The results of this work thus suggest that electrocatalysts with low price and high activity can be rationally designed and produced by a simple route for use in direct ethanol fuel cells.展开更多
The conventional ethanol fermentaion is a typical inhibitory process, leading to low productivity and yield. A new ethanol fermentation process coupled with gas stripping and vacuum fash, named as strip-flash fermenta...The conventional ethanol fermentaion is a typical inhibitory process, leading to low productivity and yield. A new ethanol fermentation process coupled with gas stripping and vacuum fash, named as strip-flash fermentation, is proposed. The process is provided with the advantages of both stripping fermentation and flash fermentation, and improves the ethanol productivity by increasing the in-situ ethanol removal. And a model of flash-strip fermentation process was established, the results from the model were consistent with the experiment values. The theoretically analyses indicate that increasing gas flux and liquid phase recycling ratio can help to enhance productivity and yield of strip-flash fermentation process, and comparison to striping fermentation or flash fermentation, flash-strip fermentation has shown a better productivity. The results has also shown the possibilities of further application and optimization of this process.展开更多
Metal oxides have a higher chemical stability in comparison to metals,so they can be utilized as electrocatalysts if the activity could be enhanced.Besides the composition,the morphology of the nanostructures has a co...Metal oxides have a higher chemical stability in comparison to metals,so they can be utilized as electrocatalysts if the activity could be enhanced.Besides the composition,the morphology of the nanostructures has a considerable impact on the electrocatalytic activity.In this work,zinc oxide nano branches-attached titanium dioxide nanofibers were investigated as an economic and stable catalyst for ethanol electrooxidation in the alkaline media.The introduced material has been synthesized by electrospinning process followed by hydrothermal technique.Briefly,electrospinning of colloidal solution consisting of titanium isopropoxide,poly（vinyl acetate） and zinc nanoparticles was performed to produce nanofibers embedding solid nanoparticles.In order to produce TiO2nanofibers containing ZnO nanoparticles,the obtained electrospun nanofiber mats were calcined in air at 600 °C.The formed ZnO nanoparticles were exploited as seeds to outgrow ZnO branches around the TiO2nanofibers using the hydrothermal technique at sub-critical water conditions in the presence of zinc nitrate and bis-hexamethylene triamine.The morphology of the final product,as well as the electrochemical measurements indicated that zinc nanoparticles content in the original electrospun nanofibers has a significant influence on the electrocatalytic activity as the best performance was observed with the nanofibers synthesized from electrospun solution containing 0.1 g Zn,and the corresponding current density was 37 mA/cm2.Overall,this study paves a way to titanium dioxide to be exploited to synthesize effective and stable metal oxide-based electrocatalysts.展开更多
基金the National Council of Scientific and Technological Development(CNPq)who enabled the execution of this study by conceding PIBIC,MSc.,Ph.D and Productivity in research grants.
文摘This work evaluated the effect of secondary bacterial metabolites produced by Pseudomonas sp LV strain in control of Lactobacillus sp. population in the microcosm of the vat during ethanol fermentation. The fraction F4 produced by Pseudomonas aeruginosa was extracted with dichloromethane and fractionating by vacuum liquid chromatography obtained in a methanol phase. The evaluation of antibiotic activity of F4 fraction mixed or not with sulphuric acid and Kamoram?. The antibiotic activity of F4 fraction was determined as well as the fermentation efficiency. Also was determined yeast cell viability, budding formation, the viability of budding cells, and number of populations of Saccharomyces cerevisiae and Lactobacillus sp. The results showed that the F4 fraction had high selective antibiotic activity against Lactobacillus sp. but not for S. cerevisae, and no inhibitory effect was observed in the fermentation process by yeast. Also F4 fraction decreased flocculation and foam formation. The F4 has an antibiotic activity against Lactobacillus sp. and should be used as an alternative to control bacteria contamination and foam and flocculation formation in the fuel ethanol fermentation process. The F4 fraction could reduce the use of antibiotics in the control of Lactobacillus sp. population during the fuel ethanol production.
基金Supported by National Research Initiative of the USDA Cooperative State Research, Education and Extension Service (2004-35504-14808)
文摘Dry land crops such as sorghums （grain sorghum, promising feedstocks for fuel ethanol production. The major issue sweet sorghum and forage sorghum） have been identified as for using the sweet sorghum as feedstock is its stability at room temperature. At room temperature, the sweet sorghum juice could lose from 40% to 50% of its fermentable sugars from 7 to 14 days No significant sugar content and profile changes were observed in juice stored at refrigerator temperature in two weeks. Ethanol fermentation efficiencies of fresh and frozen juice were high （-93%）. Concentrated juice （≥25% sugar） had significantly lower efficiencies and large amounts of fructose left in finished beer; however, winery yeast strains and novel fermentation techniques may solve these problems. The ethanol yield from sorghum grain increased as starch content increased. No linear relationship between starch content and fermentation efficiency was found. Key factors affecting the ethanol fermentation efficiency of sorghum include starches and protein digestibility, amylose-lipid complexes, tannin content, and mash viscosity. Life cycle analysis showed a positive net energy value （NEV） = 25 500 Btu/gal ethanol. Fourier transform infrared （FTIR） spectroscopy and X-ray diffraction （XRD） were used to determine changes in the structure and chemical composition of sorghum biomasses. Dilute sulfuric acid pretreatment was effective in removing the hemicellulose from biomasses and exposing the cellulose for enzymatic hydrolysis. Forage sorghum lignin had a lower syringyl/guaiacyl ratio and its pretreated biomass was easier to hydrolyze. Up to 72% hexose yield and 94% pentose yield were obtained by using a modified steam explosion with 2% sulfuric acid at 140℃ for 30 min and enzymatic hydrolysis with cellulase.
基金This work was supported by the David and Lucie Packard Foundation in partnership with the Energy Foundation, US. Project (G - 0205 -06347)
文摘The Chinese government is developing biomass ethanol as one of its automobile fuels for energy security and environmental improvement reasons. The energy efficiency of the biomass-based fuel ethanol is critical issue. To investigate the energy use in the three biomass-base ethanol fuel systems, energy content approach, Market value approach and Product displacement approach methods were used to allocate the energy use based on life cycle energy assessment. The results shows that the net energy of corn based, wheat based, and cassava-based ethanol fuel are 12543MJ, 10299MJ and 13112MJ when get one ton biomassbased ethanol, respectively, and they do produce positive net energy.
文摘Hainan Yedao (Group) Co. Ltd. plans to invest 350 million Yuan in construction of a fuel ethanol project. With cooperation of a large state-owned petrochemical enter- prise, this project is planned to produce 100 thousand
基金Supported by National Natural Science Foundation of China (No.50506010)Chinese National High-tech R&D Program (863 Program) (No.2007AA100702-5)
文摘Models for hydrolysis,fermentation and concentration process,production and utilization of biogas as well as lignin gasification are developed to calculate the heat demand of ethanol production process and the amounts of heat and power generated from residues and wastewater of the process.For the energy analysis,all relevant information about the process streams,physical properties,and mass and energy balances are considered.Energy integration is investigated for establishing a network of facilities for heat and power generation from wastewater and residues treatment aiming at the increase of energy efficiency.Feeding the lignin to an IGCC process,the electric efficiency is increased by 4.4% compared with combustion,which leads to an overall energy efficiency of 53.8%.A detailed sensitivity analysis on energy efficiency is also carried out.
基金supported by the National Key Research and Development Project of China(2018YFB1501401)the Key innovation Project of Qilu University of Technology(Shandong Academy of Sciences)(2024ZDZX03)+1 种基金the Shandong Provincial Technical Innovation Boot Program(02055183)the National Natural Science Foundation of China(31870063).
文摘Presently,Saccharomyces cerevisiae demonstrates proficient co-fermentation of glucose and xylose,marking a significant advancement in second-generation fuel ethanol production.However,the presence of high concen-trations of inhibitors in industrial lignocellulose hydrolysates and post-glucose effect caused by glucose con-sumption hinders severely impedes yeast robustness and xylose utilization for ethanol fermentation.Even worse,the antagonism between xylose utilization ability and strain robustness was observed,which proposes a difficult challenge in the production of second-generation fuel ethanol by S.cerevisiae.This review introduces the effect of engineering transcriptional regulatory networks on enhancing xylose utilization,improving strain robustness,alleviating antagonism between xylose utilization and strain robustness,and reducing post-glucose effect.Additionally,we provide an outlook on the developmental trends in this field,offering insights into future di-rections for increasing the production of second-generation fuel ethanol in S.cerevisiae.
基金supported by the National Natural Science Foundation of China(22472023,22202037)the Jilin Province Science and Technology Development Program(20250102077JC)the Fundamental Research Funds for the Central Universities(2412024QD014,2412023QD019).
文摘Direct ethanol fuel cells(DEFCs)are a promising alternative to conventional energy sources,offering high energy density,environmental sustainability,and operational safety.Compared to methanol fuel cells,DEFCs exhibit lower toxicity and a more mature preparation process.Unlike hydrogen fuel cells,DEFCs provide superior storage and transport feasibility,as well as cost-effectiveness,significantly enhancing their commercial viability.However,the stable C-C bond in ethanol creates a high activation energy barrier,often resulting in incomplete electrooxidation.Current commercial platinum(Pt)-and palladium(Pd)-based catalysts demonstrate low C-C bond cleavage efficiency(<7.5%),severely limiting DEFC energy output and power density.Furthermore,high catalyst costs and insufficient activity impede large-scale commercialization.Recent advances in DEFC anode catalyst design have focused on optimizing material composition and elucidating catalytic mechanisms.This review systematically examines developments in ethanol electrooxidation catalysts over the past five years,highlighting strategies to improve C1 pathway selectivity and C-C bond activation.Key approaches,such as alloying,nanostructure engineering,and interfacial synergy effects,are discussed alongside their mechanistic implications.Finally,we outline current challenges and future prospects for DEFC commercialization.
基金supported by the National Water Pollution Control and Management Technology Major Projects(No. 2008ZX07101-010-03)the National Natural Science Foundation of China (No. 50708058)+2 种基金the National High Technology Research and Development Program (863)of China (No. 2012AA062703)the Shanghai Municipal Science and Technology Commission Major Project (No.04DZ12030-2)the Shanghai Committee of Science and Technology (No.10231201800)
文摘A technology to achieve stable and high ammonia nitrogen removal rates for corn distillery wastewater （ethanol fuel production） treatment has been designed.The characteristics of nitrifying bacteria entrapped in a waterborne polyurethane （WPU） gel carrier were evaluated after acclimation.In the acclimation period,nitrification rates of WPU-immobilized nitrobacteria were monitored and polymerase chain reaction （PCR） was also carried out to investigate the change in ammonium-oxidizing bacteria.The results showed that the pellet nitrification rates increased from 21 to 228 mg-N/（L-pellet·hr） and the quantity of the ammonia oxidation bacteria increased substantially during the acclimation.A continuous ammonia removal experiment with the anaerobic pond effluent of a distillery wastewater system was conducted with immobilized nitrifying bacteria for 30 days using an 80 L airlift reactor with pellets at a fill ratio of 15% （V/V）.Under the conditions of 75 mg/L influent ammonia,hydraulic retention time （HRT） of 3.7-5.6 hr,and dissolved oxygen （DO） of 4 mg/L,the effluent ammonia concentration was lower than 10 mg/L and the ammonia removal efficiency was 90%.While the highest ammonia removal rate,162 mg-N/（L-pellet·hr）,was observed when the HRT was 1.3 hr.
基金the Brazilian agencies FAPES (Fundacao de Amparo a Pesquisa do Estado do Espirito Santo)FAPESP (Fundacao de Amparo a Pesquisa do Estado de Sao Paulo) for financial scholarship
文摘The sensing capability of a Tb^(3+)-metal-organic framework, based on its photoluminescence, was used for detection of methanol in ethanol fuel. It was synthesized using terbium and trimesic acid as a metal ion center and ligand, respectively. Powder X-ray diffraction, infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy were employed to characterize the synthesized MOF-76 structural features. According to the results, MOF-76 was successfully obtained with minor synthetic modification and its activated form(named TbTMA) was tested as a sensor for methanol. Tb^(3+) luminescence intensity increases as the methanol concentration in ethanol fuel also increases and the water content does not affect this response. Our findings indicate TbTMA as an appropriate sensor for evaluating ethanol fuel adulteration by methanol addition above the allowed limit.
基金supported by the National Basic Research and Development Program of China (No. 2009CB220100)Beijing Excellent Talent Support Program (No. 20071D1600300396)
文摘Three co-impregnation/chemical reduction methods in acidic solutions of pH 〈 1,including ethylene glycol （EG）,NaBH4,and HCOOH,were compared for Pt-WO3/C catalysts.Pt-WO3/C catalysts containing 10 wt.% and 20 wt.% platinum per carbon were prepared by the three methods; their morphology and electrocatalytic activities were characterized.The 20 wt.% Pt-WO3/C catalyst prepared by the co-impregnation/EG method presented the optimal dispersion with an average particle size of 4.6 nm and subsequently the best electrocatalytic activity,and so,it was further characterized.Its anodic peak current density for ethanol oxidation from linear sweep voltammetry （LSV） is 7.9 mA·cm^-2,which is 1.4 and 5.2 times as high as those of the catalysts prepared by co-impregnation/NaBH4 and co-impregnation/ HCOOH reduction methods,2.1 times as high as that of the 10 wt.% Pt-WO3/C catalyst prepared by co-impregnation/EG method,respectively.
基金supported by the International Science and Technology Cooperation Program of China (No. 2006DFA61240)
文摘To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the preparation of Pt/CNTs@TiO2 and Pt-Mo/CNTs@TiO2 electrocatalysts via a UV-photoreduction method.The physicochemical characterizations of the catalysts were carried out by using X-ray diffraction （XRD）,transmission electron microscopy （TEM）,X-ray photoelectron spectroscopy （XPS）,and infrared spectroscopy of adsorbed probe ammonia molecules.The electrocatalytic properties of the catalysts for methanol oxidation were investigated by the cyclic voltammetry technique.The results show that Pt-Mo/CNTs@TiO2 electrode exhibits the highest performance in all the electrodes.It is explained that,the structure,the oxidation states,and the acid-base properties of the catalysts are influenced due to the strong interaction between Ti and Mo species by adding TiO2 and MoOx to the Pt-based catalysts.
文摘The preparation of ethanol-diesel fuel blends and their emission characteristics were investigated. Results showed the absolute ethanol can dissolve in diesel fuel at an arbitrary ratio and a small quantity of water(0.2%) addition can lead to the phase separation of blends. An organic additive was synthesized and it can develop the ability of resistance to water and maintain the stability of ethanol-diesel-trace amounts of water system. The emission characteristics of 10%, 20%, and 30% ethanol-diesel fuel blends, with or without additives, were compared with those of diesel fuel in a direct injection(DI) diesel engine. The experimental results indicated that the blend of ethanol with diesel fuel significantly reduced the concentrations of smoke, hydrocarbon(HC), and carbon monoxide(CO) in exhaust gas. Using 20% ethanol-diesel fuel blend with the additive of 2% of the total volume, the optimum mixing ratio was achieved, at which the bench diesel engine testing showed a significant decrease in exhaust gas. Bosch smoke number was reduced by 55%, HC emission by 70%, and CO emission by 45%, at 13 kW/1540 r/min. However, ethanol-diesel fuel blends produced a few ppm acetaldehydes and more ethanol in exhaust gas.
基金Key Project of National Natural Science Foundation of China (No.20436040) National Natural Science Foundation of China (No.20176044)
文摘A novel routine for removing water from ethanol by the hydration using C4 olefin cut catalyzed with the ion exchange resin was proposed. Reactive distillation experiments were carried out to demonstrate the feasibility of this routine. The sensitivity analysis was performed by using the software of ASPEN PLUS 10.2. The optimized operating conditions were obtained considering three objective functions which were the water content of the bottom product, water conversion rate and hydration selectivity. Under the optimized operation conditions, the final product was consisted of 45.0% of ethanol, 19.4% of ethyl tert-butyl ether, 35.1% of tert-butyl alcohol and 0.6% of water in volumetric percentage.
文摘To evaluate the environmental, economic, energy performance of biomass ethanol fuel in China and to support the decision-making of biomass ethanol energy policy, an assessment method of life cycle 3E (economy, environment, energy) was applied to the three biomass ethanol fuel cycle alternatives, which includes cassava-based, corn-based and wheat-based ethanol fuel. The assessments provide a comparison of the economical performance, energy efficiency and environmental impacts of the three alternatives. And the development potential of the three alternatives in China was examined. The results are very useful for the Chinese government to make decisions on the biomass ethanol energy policy, and some advises for the decision-making of Chinese government were given.
文摘Biomass ethanol fuel is not only renewable but also environmental-friendly. Guangxi Zhuang Autonomous Region is developing the cassava-based ethanol fuel. Economical performance of the project is the key issue. The traditional life cycle economical analysis is just a static calculation process. Uncertainty is the character of cassava yield, cost of cassava plant, cassava price, tax rate and gasoline price, and the economical performance of the project is determined by these aspects. This study proposes an economical model of cassava-based ethanol fuel. The method of Monte Carol is used to simulate the economical performance. This method conquers the shortage of the traditional way. The results show that cassava-based ethanol fuel can get survived when the tax is exempted. Finally, the study also evaluates the potential of the economical performance.
文摘The primary barrier to the use of ethanol in diesel fuel is the poor miscibility at lower temperatures. The miscibilities of ethanol in 19 diesel fuels having a wide variation in compositions were evaluated by testing their phase separation temperatures. The result shows that aromatic contents and intermediate distillate temperatures have a significant impact on miscibility limits. The FCC diesels, which contain up to 50% of aromatics, exhibit different phase behavior trends in comparison with straight-run diesels and other diesel fuels.
基金supported by the National Natural Science Foundation of China(22272103)the China Postdoctoral Science Foundation(2023TQ0204)+3 种基金the Fundamental Research Funds for the Central Universities(GK202304011)the Natural Science Foundation of Shaanxi Province(JC-YBQN-0088)the Science and Technology Innovation Team of Shaanxi Province(2023-CX-TD-27)the Sanqin scholars innovation teams in Shaanxi Province,China。
文摘Highly active and stable electrocatalysts for ethanol oxidation reaction(EOR)are critical for the widespread adoption of direct ethanol fuel cells(DEFCs).However,the low efficiency of C–C bond cleavage of commercial electrocatalysts not only leads to incomplete ethanol oxidation but also results in the accumulation of poisoning CO species.In this work,silver-platinum hollow nanocubes(AgPt hNCs)are designed and synthesized to achieve high selectivity for the complete 12-electron EOR in an alkaline electrolyte.AgPt h NCs demonstrate a Faradaic efficiency of up to 88.2%at the potential of 0.70 V for the C1 pathway and exhibit a 6.3-fold EOR mass activity than commercial Pt black at the potential of 0.81 V.Moreover,the oxyphilic nature of Ag imparts exceptional long-term stability to AgPt h NCs.Theoretical calculations reveal that the electronic interaction between Pt and Ag effectively modifies the d-band properties of surface Pt atoms,thereby optimizing the adsorption behavior of key intermediates,promoting the dehydrogenation of CH_(3)CO^(*)to CH_(2)CO^(*),and facilitating C–C bond cleavage.The present work provides both theoretical and experimental insights into the utilization of Ag-based alloy catalysts for highperformance DEFCs.
基金supported by the National Natural Science Foundation of China (21307038 and 21577046)Key Project of Chinese Ministry of Education (212115)Physical Chemistry Experiment of Huanggang Normal University (2015CK12)~~
文摘Pt/Ni catalysts modified with CeO2 nanoparticles were prepared by simple composite electrodeposition of Ni and CeO2,and spontaneous Ni partial replacement by Pt processes.The as-prepared CeO2-modified Pt/Ni catalysts showed enhanced catalytic performance for ethanol electro-oxidation compared with pure Pt/Ni,and acetate species were proposed to be the main products of the oxidation when using these catalysts.The content of CeO2 in the as-prepared catalysts influenced their catalytic activity,with Pt/NiCe2（obtained from an electrolyte containing 100 mg/L CeO2 nanoparticles） exhibiting higher activity and relatively better stability in ethanol electro-oxidation.This was mainly due to the oxygen storage capacity of CeO2,the interaction between Pt and CeO2/Ni,and the relatively small contact and charge transfer resistances.The results of this work thus suggest that electrocatalysts with low price and high activity can be rationally designed and produced by a simple route for use in direct ethanol fuel cells.
文摘The conventional ethanol fermentaion is a typical inhibitory process, leading to low productivity and yield. A new ethanol fermentation process coupled with gas stripping and vacuum fash, named as strip-flash fermentation, is proposed. The process is provided with the advantages of both stripping fermentation and flash fermentation, and improves the ethanol productivity by increasing the in-situ ethanol removal. And a model of flash-strip fermentation process was established, the results from the model were consistent with the experiment values. The theoretically analyses indicate that increasing gas flux and liquid phase recycling ratio can help to enhance productivity and yield of strip-flash fermentation process, and comparison to striping fermentation or flash fermentation, flash-strip fermentation has shown a better productivity. The results has also shown the possibilities of further application and optimization of this process.
基金the Deanship of Scientific Research at King Saud University for funding the work through the research group project No.RGP-089
文摘Metal oxides have a higher chemical stability in comparison to metals,so they can be utilized as electrocatalysts if the activity could be enhanced.Besides the composition,the morphology of the nanostructures has a considerable impact on the electrocatalytic activity.In this work,zinc oxide nano branches-attached titanium dioxide nanofibers were investigated as an economic and stable catalyst for ethanol electrooxidation in the alkaline media.The introduced material has been synthesized by electrospinning process followed by hydrothermal technique.Briefly,electrospinning of colloidal solution consisting of titanium isopropoxide,poly（vinyl acetate） and zinc nanoparticles was performed to produce nanofibers embedding solid nanoparticles.In order to produce TiO2nanofibers containing ZnO nanoparticles,the obtained electrospun nanofiber mats were calcined in air at 600 °C.The formed ZnO nanoparticles were exploited as seeds to outgrow ZnO branches around the TiO2nanofibers using the hydrothermal technique at sub-critical water conditions in the presence of zinc nitrate and bis-hexamethylene triamine.The morphology of the final product,as well as the electrochemical measurements indicated that zinc nanoparticles content in the original electrospun nanofibers has a significant influence on the electrocatalytic activity as the best performance was observed with the nanofibers synthesized from electrospun solution containing 0.1 g Zn,and the corresponding current density was 37 mA/cm2.Overall,this study paves a way to titanium dioxide to be exploited to synthesize effective and stable metal oxide-based electrocatalysts.
