This paper proposes a frequency reconfigurable triangular antenna actuated by an inflated triangular structure.The open path antenna is transformed from an open type to a closed structure by inflating.Inflatable struc...This paper proposes a frequency reconfigurable triangular antenna actuated by an inflated triangular structure.The open path antenna is transformed from an open type to a closed structure by inflating.Inflatable structures are easy to manufacture by fusing 2 inextensible membranes together along a defined pattern of lines.However,the prediction of their deployed shape remains a challenge.To solve the pattern changed problem,guided by geometric analyses and local buckle characteristics,the inflated triangular structure has been designed and verified by experiment and simulation.In the process of transformation of the antenna,the resonant frequency of the antenna is changed because this frequency is determined by the conformational change.The resonant frequency changes from GHz to kHz when the design of initial structure sizes is from millimeter to meter.The measured peak gains,the frequency,and the radiation direction are also reconfigurable by the initial size.Finally,the reconfigurable resonator array is presented,which is coupled to electric fields to absorb all incident radiation.In this work,the changed pattern design by inflating is applied to the antenna design,and its frequency reconfigurability is achieved.Through the electricity performance analysis of the reconfigurable antenna,precise manufacturing will be possible and provide guidance for manufacturing frequency reconfigurable antennas.展开更多
In this paper,the design and experimental evaluation of a hexagonalshaped coplanar waveguide(CPW)-feed frequency reconfigurable antenna is presented using flame retardant(FR)-4 substrate with size of 37×35×1...In this paper,the design and experimental evaluation of a hexagonalshaped coplanar waveguide(CPW)-feed frequency reconfigurable antenna is presented using flame retardant(FR)-4 substrate with size of 37×35×1.6 mm3.The antenna is made tunable to three different modes through the status of two pin diodes to operate in four distinct frequency bands,i.e.,2.45 GHz wireless fidelity(Wi-Fi)in MODE 1,3.3 GHz(5G sub-6 GHz band)in MODE 2,2.1 GHz(3G Long Term Evolution(LTE)-advanced)and 3.50 GHz Worldwide Interoperability for Microwave Access(WiMAX)in MODE 3.The optimization through simulation modeling shows that the proposed antenna can provide adequate gain(1.44∼2.2 dB),sufficient bandwidth(200∼920 MHz)and high radiation efficiency(80%∼95%)in the four resonating frequency bands.Voltage standing wave ratio(VSWR)<1.5 is achieved for all bands with properly matched characteristics of the antenna.To validate the simulation results,fabrication of the proposed optimized design is performed,and experimental analysis is found to be in a considerable amount of agreement.Due to its reasonably small size and support of multiple frequency bands operation,the proposed antenna can support portable devices for handheld 5G and Wireless LAN(WLAN)applications.展开更多
Reconfigurable antennas have attracted significant interest because of their ability to dynamically adjust radiation properties,such as operating frequencies,thereby managing the congested frequency spectrum efficient...Reconfigurable antennas have attracted significant interest because of their ability to dynamically adjust radiation properties,such as operating frequencies,thereby managing the congested frequency spectrum efficiently and minimizing crosstalk.However,existing approaches utilizing switches or advanced materials are limited by their discrete tunability,high static power consumption,or material degradation for long-term usage.In this study,we present a W-band frequency reconfigurable antenna that undergoes a geometric transformation from a two-dimensional(2D)precursor,selectively bonded to a prestretched elastomeric substrate,into a desired 3D layout through controlled compressive buckling.Modeling the buckling process using combined mechanics-electromagnetic finite element analysis(FEA)allows for the rational design of the antenna with desired strains applied to the substrate.By releasing the substrate at varying compression ratios,the antenna reshapes into different 3D configurations,enabling continuous frequency reconfigurability.Simulation and experimental results demonstrate that the antenna’s resonant frequency can be tuned from 77 GHz in its 2D state to 94 GHz in its 3D state in a folded-dipole-like design.展开更多
A composite ceramic with nominal composition of 45.0 wt%（Ba0.5Sr0.5）TiO3–55.0 wt%MgO（acronym is BST–MgO） is sintered for fabricating a frequency reconfigurable aperture-coupled microstrip antenna. The calcined ...A composite ceramic with nominal composition of 45.0 wt%（Ba0.5Sr0.5）TiO3–55.0 wt%MgO（acronym is BST–MgO） is sintered for fabricating a frequency reconfigurable aperture-coupled microstrip antenna. The calcined BST–Mg O composite ceramic exhibits good microwave dielectric properties at X-band with appropriate dielectric constant εr around85, lower dielectric loss tan δ about 0.01, and higher permittivity tunability 14.8% at 8.33 k V/cm. An ultrahigh E-field tunability of working frequency up to 11.0%（i.e., from 9.1 GHz to 10.1 GHz with a large frequency shift of 1000 MHz）at a DC bias field from 0 to 8.33 k V/cm and a considerably large center gain over 7.5 d B are obtained in the designed frequency reconfigurable microstrip antenna. These results demonstrate that BST materials are promising for the frequency reconfigurable antenna.展开更多
Wireless communication systems which require flexibility and reconfigurability in antenna systems faces main problems like antenna performance, size, weight and cost. A wide band Frequency Reconfigurable Rectangular S...Wireless communication systems which require flexibility and reconfigurability in antenna systems faces main problems like antenna performance, size, weight and cost. A wide band Frequency Reconfigurable Rectangular Slotted Self Similar Antenna has been proposed in this paper. The rectangular slotted patch is repeated for two iterations at different scales and is separated by means of Radio Frequency Micro Electro Mechanical Systems (RF MEMS) switches in order to provide reconfigurability. The antenna can operate in three frequency bandsi.e. K-band, Ku-band and Ka-band by altering the states of RF MEMS switches. To avoid fringing effects and to improve antenna performance, quarter wavelength (λ/4) spacing is required between the antenna and the ground plane. However, a Reconfigurable Antenna requires different λ/4 spacing which is difficult to achieve using a common ground plane. So the Frequency Reconfigurable antenna is integrated with high impedance surface (HIS) like Electronic Band Gap (EBG) structures to suppress standing waves and surface waves with a unified profile thickness of 1.75 mm. The overall dimension of the proposed antenna along with RF MEMS Switch, feed element and HIS is about 8 mm × 8 mm × 1.75 mm. The simulated results of the proposed antenna reveal enhancement in antennas performance like Voltage Standing Wave Ratio (VSWR), Front to Back Ratio (FBR) and bandwidth when it is placed over HIS EBG. Also the radiation patterns of the proposed antenna when placed over EBG shows the suppression of side lobe and backward radiation.展开更多
基金supported by the National Natural Science Foundation of China(No.12172102).
文摘This paper proposes a frequency reconfigurable triangular antenna actuated by an inflated triangular structure.The open path antenna is transformed from an open type to a closed structure by inflating.Inflatable structures are easy to manufacture by fusing 2 inextensible membranes together along a defined pattern of lines.However,the prediction of their deployed shape remains a challenge.To solve the pattern changed problem,guided by geometric analyses and local buckle characteristics,the inflated triangular structure has been designed and verified by experiment and simulation.In the process of transformation of the antenna,the resonant frequency of the antenna is changed because this frequency is determined by the conformational change.The resonant frequency changes from GHz to kHz when the design of initial structure sizes is from millimeter to meter.The measured peak gains,the frequency,and the radiation direction are also reconfigurable by the initial size.Finally,the reconfigurable resonator array is presented,which is coupled to electric fields to absorb all incident radiation.In this work,the changed pattern design by inflating is applied to the antenna design,and its frequency reconfigurability is achieved.Through the electricity performance analysis of the reconfigurable antenna,precise manufacturing will be possible and provide guidance for manufacturing frequency reconfigurable antennas.
文摘In this paper,the design and experimental evaluation of a hexagonalshaped coplanar waveguide(CPW)-feed frequency reconfigurable antenna is presented using flame retardant(FR)-4 substrate with size of 37×35×1.6 mm3.The antenna is made tunable to three different modes through the status of two pin diodes to operate in four distinct frequency bands,i.e.,2.45 GHz wireless fidelity(Wi-Fi)in MODE 1,3.3 GHz(5G sub-6 GHz band)in MODE 2,2.1 GHz(3G Long Term Evolution(LTE)-advanced)and 3.50 GHz Worldwide Interoperability for Microwave Access(WiMAX)in MODE 3.The optimization through simulation modeling shows that the proposed antenna can provide adequate gain(1.44∼2.2 dB),sufficient bandwidth(200∼920 MHz)and high radiation efficiency(80%∼95%)in the four resonating frequency bands.Voltage standing wave ratio(VSWR)<1.5 is achieved for all bands with properly matched characteristics of the antenna.To validate the simulation results,fabrication of the proposed optimized design is performed,and experimental analysis is found to be in a considerable amount of agreement.Due to its reasonably small size and support of multiple frequency bands operation,the proposed antenna can support portable devices for handheld 5G and Wireless LAN(WLAN)applications.
基金financial support from the Shenzhen Science and Technology Program(KJZD20230923115005009).
文摘Reconfigurable antennas have attracted significant interest because of their ability to dynamically adjust radiation properties,such as operating frequencies,thereby managing the congested frequency spectrum efficiently and minimizing crosstalk.However,existing approaches utilizing switches or advanced materials are limited by their discrete tunability,high static power consumption,or material degradation for long-term usage.In this study,we present a W-band frequency reconfigurable antenna that undergoes a geometric transformation from a two-dimensional(2D)precursor,selectively bonded to a prestretched elastomeric substrate,into a desired 3D layout through controlled compressive buckling.Modeling the buckling process using combined mechanics-electromagnetic finite element analysis(FEA)allows for the rational design of the antenna with desired strains applied to the substrate.By releasing the substrate at varying compression ratios,the antenna reshapes into different 3D configurations,enabling continuous frequency reconfigurability.Simulation and experimental results demonstrate that the antenna’s resonant frequency can be tuned from 77 GHz in its 2D state to 94 GHz in its 3D state in a folded-dipole-like design.
基金Project supported by the National Natural Science Foundation of China(Grant No.11074040)the Key Project of Shandong Provincial Department of Science and TechnologyChina(Grant No.ZR2012FZ006)
文摘A composite ceramic with nominal composition of 45.0 wt%（Ba0.5Sr0.5）TiO3–55.0 wt%MgO（acronym is BST–MgO） is sintered for fabricating a frequency reconfigurable aperture-coupled microstrip antenna. The calcined BST–Mg O composite ceramic exhibits good microwave dielectric properties at X-band with appropriate dielectric constant εr around85, lower dielectric loss tan δ about 0.01, and higher permittivity tunability 14.8% at 8.33 k V/cm. An ultrahigh E-field tunability of working frequency up to 11.0%（i.e., from 9.1 GHz to 10.1 GHz with a large frequency shift of 1000 MHz）at a DC bias field from 0 to 8.33 k V/cm and a considerably large center gain over 7.5 d B are obtained in the designed frequency reconfigurable microstrip antenna. These results demonstrate that BST materials are promising for the frequency reconfigurable antenna.
文摘Wireless communication systems which require flexibility and reconfigurability in antenna systems faces main problems like antenna performance, size, weight and cost. A wide band Frequency Reconfigurable Rectangular Slotted Self Similar Antenna has been proposed in this paper. The rectangular slotted patch is repeated for two iterations at different scales and is separated by means of Radio Frequency Micro Electro Mechanical Systems (RF MEMS) switches in order to provide reconfigurability. The antenna can operate in three frequency bandsi.e. K-band, Ku-band and Ka-band by altering the states of RF MEMS switches. To avoid fringing effects and to improve antenna performance, quarter wavelength (λ/4) spacing is required between the antenna and the ground plane. However, a Reconfigurable Antenna requires different λ/4 spacing which is difficult to achieve using a common ground plane. So the Frequency Reconfigurable antenna is integrated with high impedance surface (HIS) like Electronic Band Gap (EBG) structures to suppress standing waves and surface waves with a unified profile thickness of 1.75 mm. The overall dimension of the proposed antenna along with RF MEMS Switch, feed element and HIS is about 8 mm × 8 mm × 1.75 mm. The simulated results of the proposed antenna reveal enhancement in antennas performance like Voltage Standing Wave Ratio (VSWR), Front to Back Ratio (FBR) and bandwidth when it is placed over HIS EBG. Also the radiation patterns of the proposed antenna when placed over EBG shows the suppression of side lobe and backward radiation.
