Effects of free iron oxyhydrates （Fed） and soil organic matter （SOM） on copper （Cu^2＋） sorption-desorption behavior by size fractions of aggregates from two typical paddy soils （Ferric-Accumulic Stagnic Anthro...Effects of free iron oxyhydrates （Fed） and soil organic matter （SOM） on copper （Cu^2＋） sorption-desorption behavior by size fractions of aggregates from two typical paddy soils （Ferric-Accumulic Stagnic Anthrosol （Soil H） and Gleyic Stagnic Anthrosol （Soil W）） were investigated with and without treatments of dithionite-citrate-bicarbonate and of H2O2. The size fractions of aggregates were obtained from the undisturbed bulk topsoil using a low energy ultrasonic dispersion procedure. Experiments of equilibrium sorption and subsequent desorption were conducted at soil water ratio of 1：20, 25℃. For Soil H, Cu^2＋ sorption capacity of the DCB-treated size fractions was decreased by 5.9% for fine sand fraction, by 40.4% for coarse sand fraction, in comparison to 2.9% for the bnlk sample. However, Cu^2＋ sorption capacities of the H2O2-treated fractions were decreased by over 80% for the coarse sand fraction and by 15% for the clay-sized fraction in comparison to 88% for bulk soil. For Soil W, Cu^2＋ sorption capacity of the DCB-treated size fraction was decreased by 30% for the coarse sand fraction and by over 75% for silt sand fraction in comparison to 44.5% for the bulk sample. Cu^2＋ sorption capacities of the H2O2-treated fractions were decreased by only 2.0% for the coarse sand fraction and by 15% for the fine sand fraction in comparison to by 3.4% for bulk soil. However, Cu^2＋ desorption rates were increased much in H2O2-treated samples by over 80% except the clay-sized fraction （only 9.5%） for Soil H. While removal of SOM with H2O2 tendend to increase the desorption rate, DCB- and H2O2-treatments caused decrease in Cu^2＋ retention capacity of size fractions, Particularly, there hardly remained Cu^2＋ retention capacity by size fractions from Soil H after H2O2 treatment except for clay-sized fraction. These findings supported again the dominance of the coarse sand fraction in sorption of metals and the preference of absorbed metals bound to SOM in differently stabilized status among the size fractions. Thus, enrichment and turnover of SOM in paddy soils may have great effects on metal retention and chemical mobility in paddy soils.展开更多
The relationship between iron oxides and surface charge characteristics in variable charge soils ( latosol and red earth ) was studied in following three ways. ( 1 ) Remove free iron oxides ( Fed ) and amorphous iron ...The relationship between iron oxides and surface charge characteristics in variable charge soils ( latosol and red earth ) was studied in following three ways. ( 1 ) Remove free iron oxides ( Fed ) and amorphous iron oxides ( Feo ) from the soils with sodium dithionite and acid ammonium oxalate solution respectively. ( 2 ) Add 2% glucose ( on the basis of air-dry soil weight ) to soils and incubate under submerged condition to activate iron oxides, and then the mixtures are dehydrated and air-dried to age iron oxides. ( 3 ) Precipitate various crystalline forms of iron oxides onto kaolinite. The results showed that free iron oxides ( Fed ) were the chief carrier of variable positive charges. Of which crystalline iron oxides ( Fed-Feo ) presented mainly as discrete particles in the soils and could only play a role of the carrier of positive charges, and did little influence on negative charges. Whereas the amorphous iron oxides ( Feo ) , which presented mainly as a coating with a large specific surface area, not only had positive charges, but also blocked the negative charge sites in soils. Submerged incubation activated iron oxides in the soils, and increased the amount of amorphous iron oxides and the degree of activation of iron oxide, which resulted in the increase of positive and negative charges of soils. Dehydration and air-dry aged iron oxides in soils and decreased the amount of amorphous iron oxides and the degree of activation of iron oxide, and also led to the decrease of positive and negative charges. Both the submerged incubation and the dehydration and air-dry had no significant influence on net charges. Precipitation of iron oxides onto kaolinite markedly increased positive charges and decreased negative charges. Amorphous iron oxide having a larger surface area contributed more positive charge sites and blocked more negative charge sites in kaolinite than crystalline goethite.展开更多
The preparation of sulfoaluminate cementitious materials(SCM)is a promising way to massively utilize solid wastes.Iron phases are significant in SCM system but the thermodynamic data of some key minerals,such as6 CaO&...The preparation of sulfoaluminate cementitious materials(SCM)is a promising way to massively utilize solid wastes.Iron phases are significant in SCM system but the thermodynamic data of some key minerals,such as6 CaO·Al2 O3·2 Fe2 O3(C6 AF2)and 6 CaO·2 Al2 O3·Fe2 O3(C6 A2 F),are missing,which greatly hinders the SCM optimization in a theoretical way.This work,for the first time,calculated the standard formation enthalpy,Gibbs free energy of formation,entropy and molar heat capacity for C6 AF2 and C6 A2 F and lowered the errors to the least with the reference of C4 AF data in the literature.By building the function diagram of Gibbs free energy changes with temperature for the basic iron phase formation reactions with the obtained thermodynamic data,it is proved that the formation likeliness of C6 AF2 is higher than that of C6 A2 F,as is accordant to the literatures and verifies the correctness of obtained data.This work provides a good theoretical foundation to optimize SCM mineral system and to study relevant mechanism deeply.展开更多
In consideration of the composition characteristics and quality requirements of sulphurous free-cutting gear steel, the rational measures of sulfur control, calcium treatment and key technologies of continuous casting...In consideration of the composition characteristics and quality requirements of sulphurous free-cutting gear steel, the rational measures of sulfur control, calcium treatment and key technologies of continuous casting process are applied in the development of a full-line operation of LD-Billet continuous casting on steelmaking with semi-steel, which suggests an economic production of the steel has been realized. Test results show that the average retrieval rate of sulphurous alloy in the process of RH treatment is 95.3% and sulfur content of products is stability. Otherwise, content of T[O] in casting billet is in the range of 11×10-6 ~ 18×10-6 with average value is 14.7×10-6.Based on this, the billets have good surface quality and internal quality.展开更多
Iron-ore-imbedded silicone rubber materials were produced for radiation shielding. Samples were tested against a Co-60 gamma source, which is widely used in nuclear technology and medicine. Decreasing the particle siz...Iron-ore-imbedded silicone rubber materials were produced for radiation shielding. Samples were tested against a Co-60 gamma source, which is widely used in nuclear technology and medicine. Decreasing the particle size of iron ore resulted in better gamma radiation protection owing to more homogenous distribution. In addition, the materials had flexible properties up to the addition of 60 wt% iron ore content. Further, 0.5 mm Pb E gamma protection was provided by using 2.06-mm-thick SDT-60 as the Co-60 source. Iron ore–silicone rubber composites are candidate materials for lead-free flexible radiation protection systems owing to their relatively inexpensive and easy production.展开更多
基金supported by the National Natural Science Foundation of China (No. 40231016).
文摘Effects of free iron oxyhydrates （Fed） and soil organic matter （SOM） on copper （Cu^2＋） sorption-desorption behavior by size fractions of aggregates from two typical paddy soils （Ferric-Accumulic Stagnic Anthrosol （Soil H） and Gleyic Stagnic Anthrosol （Soil W）） were investigated with and without treatments of dithionite-citrate-bicarbonate and of H2O2. The size fractions of aggregates were obtained from the undisturbed bulk topsoil using a low energy ultrasonic dispersion procedure. Experiments of equilibrium sorption and subsequent desorption were conducted at soil water ratio of 1：20, 25℃. For Soil H, Cu^2＋ sorption capacity of the DCB-treated size fractions was decreased by 5.9% for fine sand fraction, by 40.4% for coarse sand fraction, in comparison to 2.9% for the bnlk sample. However, Cu^2＋ sorption capacities of the H2O2-treated fractions were decreased by over 80% for the coarse sand fraction and by 15% for the clay-sized fraction in comparison to 88% for bulk soil. For Soil W, Cu^2＋ sorption capacity of the DCB-treated size fraction was decreased by 30% for the coarse sand fraction and by over 75% for silt sand fraction in comparison to 44.5% for the bulk sample. Cu^2＋ sorption capacities of the H2O2-treated fractions were decreased by only 2.0% for the coarse sand fraction and by 15% for the fine sand fraction in comparison to by 3.4% for bulk soil. However, Cu^2＋ desorption rates were increased much in H2O2-treated samples by over 80% except the clay-sized fraction （only 9.5%） for Soil H. While removal of SOM with H2O2 tendend to increase the desorption rate, DCB- and H2O2-treatments caused decrease in Cu^2＋ retention capacity of size fractions, Particularly, there hardly remained Cu^2＋ retention capacity by size fractions from Soil H after H2O2 treatment except for clay-sized fraction. These findings supported again the dominance of the coarse sand fraction in sorption of metals and the preference of absorbed metals bound to SOM in differently stabilized status among the size fractions. Thus, enrichment and turnover of SOM in paddy soils may have great effects on metal retention and chemical mobility in paddy soils.
文摘The relationship between iron oxides and surface charge characteristics in variable charge soils ( latosol and red earth ) was studied in following three ways. ( 1 ) Remove free iron oxides ( Fed ) and amorphous iron oxides ( Feo ) from the soils with sodium dithionite and acid ammonium oxalate solution respectively. ( 2 ) Add 2% glucose ( on the basis of air-dry soil weight ) to soils and incubate under submerged condition to activate iron oxides, and then the mixtures are dehydrated and air-dried to age iron oxides. ( 3 ) Precipitate various crystalline forms of iron oxides onto kaolinite. The results showed that free iron oxides ( Fed ) were the chief carrier of variable positive charges. Of which crystalline iron oxides ( Fed-Feo ) presented mainly as discrete particles in the soils and could only play a role of the carrier of positive charges, and did little influence on negative charges. Whereas the amorphous iron oxides ( Feo ) , which presented mainly as a coating with a large specific surface area, not only had positive charges, but also blocked the negative charge sites in soils. Submerged incubation activated iron oxides in the soils, and increased the amount of amorphous iron oxides and the degree of activation of iron oxide, which resulted in the increase of positive and negative charges of soils. Dehydration and air-dry aged iron oxides in soils and decreased the amount of amorphous iron oxides and the degree of activation of iron oxide, and also led to the decrease of positive and negative charges. Both the submerged incubation and the dehydration and air-dry had no significant influence on net charges. Precipitation of iron oxides onto kaolinite markedly increased positive charges and decreased negative charges. Amorphous iron oxide having a larger surface area contributed more positive charge sites and blocked more negative charge sites in kaolinite than crystalline goethite.
基金Supported by the Program for National Key R&D Plan(2017YFC0703100).
文摘The preparation of sulfoaluminate cementitious materials(SCM)is a promising way to massively utilize solid wastes.Iron phases are significant in SCM system but the thermodynamic data of some key minerals,such as6 CaO·Al2 O3·2 Fe2 O3(C6 AF2)and 6 CaO·2 Al2 O3·Fe2 O3(C6 A2 F),are missing,which greatly hinders the SCM optimization in a theoretical way.This work,for the first time,calculated the standard formation enthalpy,Gibbs free energy of formation,entropy and molar heat capacity for C6 AF2 and C6 A2 F and lowered the errors to the least with the reference of C4 AF data in the literature.By building the function diagram of Gibbs free energy changes with temperature for the basic iron phase formation reactions with the obtained thermodynamic data,it is proved that the formation likeliness of C6 AF2 is higher than that of C6 A2 F,as is accordant to the literatures and verifies the correctness of obtained data.This work provides a good theoretical foundation to optimize SCM mineral system and to study relevant mechanism deeply.
文摘In consideration of the composition characteristics and quality requirements of sulphurous free-cutting gear steel, the rational measures of sulfur control, calcium treatment and key technologies of continuous casting process are applied in the development of a full-line operation of LD-Billet continuous casting on steelmaking with semi-steel, which suggests an economic production of the steel has been realized. Test results show that the average retrieval rate of sulphurous alloy in the process of RH treatment is 95.3% and sulfur content of products is stability. Otherwise, content of T[O] in casting billet is in the range of 11×10-6 ~ 18×10-6 with average value is 14.7×10-6.Based on this, the billets have good surface quality and internal quality.
文摘Iron-ore-imbedded silicone rubber materials were produced for radiation shielding. Samples were tested against a Co-60 gamma source, which is widely used in nuclear technology and medicine. Decreasing the particle size of iron ore resulted in better gamma radiation protection owing to more homogenous distribution. In addition, the materials had flexible properties up to the addition of 60 wt% iron ore content. Further, 0.5 mm Pb E gamma protection was provided by using 2.06-mm-thick SDT-60 as the Co-60 source. Iron ore–silicone rubber composites are candidate materials for lead-free flexible radiation protection systems owing to their relatively inexpensive and easy production.
