Our work reported that the so-called pure carbon nanotubes(CNTs)can be synthesized without metallic catalyst by chemical vapor deposition(CVD).The as-prepared CNTs have average diameter of 50 nm and length over severa...Our work reported that the so-called pure carbon nanotubes(CNTs)can be synthesized without metallic catalyst by chemical vapor deposition(CVD).The as-prepared CNTs have average diameter of 50 nm and length over several microns.Analysis of intermediate objects in the products indicates that their formation mechanism follows the wire-to-tube model.Besides,according to thermodynamic analysis of the driving force combing with experimental results,we find that the thermal gradient can effectively favor the formation of CNTs in our metallic catalyst-free CVD.展开更多
Polyorganoborosilazane((B[C_(2)H_(4)-Si(CH_(3))NH]_(3))n)was synthesized via monomer route from a single-source precursor and thermolyzed at 1300℃in argon atmosphere.The as-thermolyzed Si-B-C-N ceramic was characteri...Polyorganoborosilazane((B[C_(2)H_(4)-Si(CH_(3))NH]_(3))n)was synthesized via monomer route from a single-source precursor and thermolyzed at 1300℃in argon atmosphere.The as-thermolyzed Si-B-C-N ceramic was characterized using X-ray diffraction(XRD)and Raman spectroscopy.The crystallization behavior of silicon carbide in the as-thermolyzed amorphous Si-B-C-N matrix was understood by XRD studies,and the crystallite size calculated using Scherrer equation was found to increase from 2 nm to 8 nm with increase in dwelling time.Concomitantly,Raman spectroscopy was used to characterize the free carbon present in the as-thermolyzed ceramic.The peak positions,intensities and full width at half maximum(FWHM)of D and G bands in the Raman spectra were used to study and understand the structural disorder of the free carbon.The G peak shift towards 1600 cm-1 indicated the decrease in cluster size of the free carbon.The cluster diameter of the free carbon calculated using TK(Tuinstra and Koenl)equation was found to decrease from 6.2 nm to 5.4 nm with increase in dwelling time,indicating increase in structural disorder.展开更多
Electrochemical CO2 reduction to chemicals or fuels presents one of the most promising strategies for managing the global carbon balance, which yet poses a significant challenge due to lack of efficient and durable el...Electrochemical CO2 reduction to chemicals or fuels presents one of the most promising strategies for managing the global carbon balance, which yet poses a significant challenge due to lack of efficient and durable electrocatalyst as well as the understanding of the CO2 reduction reaction(CO2RR) mechanism.Benefiting from the large surface area, high electrical conductivity, and tunable structure, carbon-based metal-free materials(CMs) have been extensively studied as cost-effective electrocatalysts for CO2RR.The development of CMs with low cost, high activity and durability for CO2RR has been considered as one of the most active and competitive directions in electrochemistry and material science.In this review article,some up-to-date strategies in improving the CO2RR performance on CMs are summarized.Specifically, the approaches to optimize the adsorption of CO2RR intermediates, such as tuning the physical and electronic structure are introduced, which can enhance the electrocatalytic activity of CMs effectively.Finally, some design strategies are proposed to prepare CMs with high activity and selectivity for CO2RR.展开更多
Aqueous hybrid supercapacitors are promising due to their low cost and high safety. Herein, a freestanding battery-type electrode of Bi2O3 nanoflake@C on carbon cloth is designed for aqueous sodium ion hybrid supercap...Aqueous hybrid supercapacitors are promising due to their low cost and high safety. Herein, a freestanding battery-type electrode of Bi2O3 nanoflake@C on carbon cloth is designed for aqueous sodium ion hybrid supercapacitors. Due to the integration of nanoarray architecture and the conductive carbon,the Bi2O3@C electrode exhibits a high specific capacity of 207 mAh/g at 2 A/g（6C）, good rate capability and cycling stability（133 m Ah/g after 1000 cycles）. With the activated carbon as the capacitive electrode and neutral sodium salts as the electrolyte, a 1.9 V hybrid supercapacitor is assembled,delivering a high energy density of 18.94 Wh/kg. The device can still maintain 72.3% of initial capacity after 650 cycles. The present work holds great promise for developing next-generation hybrid supercapacitors.展开更多
The carbonate-free fraction of 20 surface sediments collected from the ultraslow-spreading Southwest Indian Ridge(SWIR) was studied by grain size analysis and mineralogical analysis with X-ray powder diffraction(XRD),...The carbonate-free fraction of 20 surface sediments collected from the ultraslow-spreading Southwest Indian Ridge(SWIR) was studied by grain size analysis and mineralogical analysis with X-ray powder diffraction(XRD),stereo microscopy and scanning electron microscopy(SEM). The characteristics of the carbonate-free fraction of the sediments were obtained, and related influential factors were discussed. The results show that the mean grain size of this fraction is in 1.96Φ–8.19Φ, with poorly sorting and unimodal, bimodal or irregular bimodal distribution patterns. Four grain size end members of the fraction are derived with the End Member Model method. The finest end member EM1 shows a significant contribution of terrigenous materials of the aeolian input and sediment carried by the bottom current. End member EM2 with medium size mainly reflects sediment of a siliceous bioclast origin. EM3 and EM4 are interpreted as representing the coarser volcanic materials related to bedrock weathering or volcanic activities. Multi-provenance is the dominant factor controlling the grain size pattern of the carbonate-free fraction of the sediments in that area. In addition, sediment transport processes such as the bottom current and wind are the minor factors that influence the grain size distribution of the carbonate-free fraction sediments.展开更多
4-Methylene-1,3-oxazolidin-2-ones can be synthesized from propargylic alcohols, primary amines and carbon dioxide under supercritical condition in the absence of any additional catalyst and solvent. Various propargyli...4-Methylene-1,3-oxazolidin-2-ones can be synthesized from propargylic alcohols, primary amines and carbon dioxide under supercritical condition in the absence of any additional catalyst and solvent. Various propargylic alcohols and primary amines were examined.展开更多
A metal-free catalytic system combining oxidized carbon nanotubes (oCNTs) and ionic liquids (ILs) is presented for the oxidation of aromatic thiophene compounds with H2O2 as an oxidant. The oCNTs exhibit impressively ...A metal-free catalytic system combining oxidized carbon nanotubes (oCNTs) and ionic liquids (ILs) is presented for the oxidation of aromatic thiophene compounds with H2O2 as an oxidant. The oCNTs exhibit impressively high activity and stability in the system, which show an even better performance than those of some reported metal catalysts. The ILs are proved to have indispensable influence on the enhanced catalytic performance of the oCNTs. Detailed characterization by TG-MS and XPS demonstrates that the carbonyl groups are the active sites for the oxidation process, which is further supported by the deactivation and the model catalysts experiments. The quantitative analysis of different oxygen groups in oCNTs could be achieved by an isothermal temperature programmed TG-MS method. The concentration of carbonyl groups is 1.46 mmol per 1 g oCNTs and the tuiriover frequency of oCNTs could also be obtained (10.7 h^-1 in the presence of OmimPF6). H2O2 decomposition experiments combined with the EPR results reveal that the presence of OmimPF6 can avoid the intermediate HO· to form O2 and then improve the catalytic performance of oCNTs for the oxidation of dibenzothiophene.展开更多
In this paper, we focus on PHYTOPOROUS, a porous carbon material made entirely from plant-based ingredients, as a new broadband-wave absorber material that acts in the millimeter wave band. We created prototypes of th...In this paper, we focus on PHYTOPOROUS, a porous carbon material made entirely from plant-based ingredients, as a new broadband-wave absorber material that acts in the millimeter wave band. We created prototypes of thin rubber-sheet wave absorbers that contain porous carbon (PHYTOPOROUS) made from rice chaff and soybean hulls, which are both agricultural residue products that are generated in large quantities. We investigated the permittivity and reflectance characteristics of this material using the free-space time-domain method. The thin rubber-sheet wave absorber that contained PHYTOPOROUS made from soybean hulls exhibited a frequency band that was approximately 18 GHz wide and centered at 90 GHz. The return loss for this material was greater than −20 dB. This demonstrates that the material provides nearly constant reflection absorption over a wide frequency band.展开更多
Sodium ion batteries （SIBs） are very promising for large-scale energy storage in virtue of its high energy density, abundant sodium resources and low environmental impact, etc. However, it is still a big chal- lenge...Sodium ion batteries （SIBs） are very promising for large-scale energy storage in virtue of its high energy density, abundant sodium resources and low environmental impact, etc. However, it is still a big chal- lenge to develop high-performance and durable cathode materials for SIBs. Among different candidate materials, Na_3V_2（PO_4）_3 has attracted great attentions due to its high theoretical capacity （117 mAh/g）, stable framework structure and excellent ionic conductivity. However, Na_3V_2（PO_4）_3 delivers inferior rate capability and cycling stability due to its poor electronic conductivity. In this work, free-standing Na_3V_2（PO_4）_3/carbon nanofiber membranes are synthesized by an electrospinning-sintering mute. The sample could deliver excellent cycling capability with specific capacity of 112 mAh/g at 1 C after 250 cycles and ultrahigh rate capability with 76.9 mAh/g even at 100 C, which is superior to many state-of- the-art SIB cathode materials. This can be attributed to the hierarchically distributed Na_3V_2（PO_4）_3 crystals in carbon nanofiber network, which possesses outstanding electronicfionic conductivity and thus leads to an ultrahigh rate capabilitY.展开更多
Carbon-free basic dry vibration mix was prepared using middle grade magnesia and fused magnesia as main starting materials,metasilicate replacing phenolic resin as binder,adding a certain amount of medium and low temp...Carbon-free basic dry vibration mix was prepared using middle grade magnesia and fused magnesia as main starting materials,metasilicate replacing phenolic resin as binder,adding a certain amount of medium and low temperature intensifiers. Effects of binder,grain composition,and additives on basic dry vibration mix for tundish were studied,and the bonding mechanism was also analyzed. The results show that：（1） when using metasilicate as binder,the higher strength can be acquired; （2） the suitable grain composition is q=0.48,the critical granularity is 5 or 3 mm,the fines addition is 10%-20% （mass percent）; （3） the strength and corrosion resistance of the basic dry vibration mix can be improved by the melting compound of metasilicate and additives; （4） with temperature rising,the bonding type in dry vibration mix changes from cohere bonding to reaction bonding,and then to ceramic bonding at last.展开更多
The formation of·CCl3 radicals in liver nuclei was suggested by spin trapping of them with N-t-butyl-α-phenylnitrone followed by GC/MS detection of the resulting adduct. Comparison of its formation in microsomal...The formation of·CCl3 radicals in liver nuclei was suggested by spin trapping of them with N-t-butyl-α-phenylnitrone followed by GC/MS detection of the resulting adduct. Comparison of its formation in microsomal biotransformation of CCl4 was made. In aerobic nuclear activation mixtures containing NADPH and CCl4, significant decrease in the arachidonic acid content of nuclear lipids was observed (27. 8%, compared to control), the intensity of this decrease was lower than that occurring in the corresponding microsomal incubation mixtures (29.1%). Significant decreases in arachidonic acid content of nuclear and endoplasmic reticulum lipids were also observed in animals at 6 hours of poisoning with the haloalkane. During aerobic nuclear metabolism of CCl4 or CBrCl3, cholesterol oxidation products were detected: a ketocholesterol, an epoxide like structure and 7-ketocholesterol. Nuclear protein carbonyl formation was not promoted during nuclear CCl4 biotransformation. NADPH by itself may lead to protein carbonyl formation during prolonged periods of incubation. CBrCl3 in contrast, led to decreased protein carbonyl formation. No increase in nuclear protein carbonyl formation was observed in CCl4 intoxicated animals during periods of time between 1 to 6 hours after treatment. The results indicate that during nuclear biotransformation of CCl4 or CBrCl3 reactive free radicals, PUFA degradation, reactive aldehydes and cholesterol oxidation products are formed, nearby DNA and regulatory proteins.展开更多
Fluorine in mold powder is known as harmful to human health and the environment. Being the advocate of green production, Baosteel developed an environmentally friendly mold powder without fluorine. The main problem of...Fluorine in mold powder is known as harmful to human health and the environment. Being the advocate of green production, Baosteel developed an environmentally friendly mold powder without fluorine. The main problem of fluorine-free flux film is small heat resistance and thus the heat transfer intensity of the mold is too large, which to some extent hinders the increase of the casting speed. With the heat flow simulation equipment, controlling precipitation of crystal in flux and solidification temperature properly, fluorine-free mold powder for low carbon steel,which substitutes F with B203 ,was successfully developed and applied in industrial production. The production results show that, by using boronic fluorine-free mold powder,the boron increment in molten steel is less than 1.3ppm for conventional aluminium killed low carbon steel.展开更多
Ballistic n-type carbon nanotube(CNT)-based field-effect transistors(FETs) have been fabricated by contacting semiconducting single-walled CNTs(SWCNTs) using Sc or Y.The n-type CNT FETs were pushed to their performanc...Ballistic n-type carbon nanotube(CNT)-based field-effect transistors(FETs) have been fabricated by contacting semiconducting single-walled CNTs(SWCNTs) using Sc or Y.The n-type CNT FETs were pushed to their performance limits through further optimizing their gate structure and insulator.The CNT FETs outperformed n-type Si metal-oxide-semiconductor(MOS) FETs with the same gate length and displayed better downscaling behavior than the Si MOS FETs.Together with the demonstration of ballistic p-type CNT FETs using Pd contacts,this technological advance is a step toward the doping-free fabrication of CNT-based ballistic complementary metal-oxide-semiconductor(CMOS) devices and integrated circuits.Taking full advantage of the perfectly symmetric band structure of the semiconductor SWCNT,a perfect SWCNT-based CMOS inverter was demonstrated,which had a voltage gain of over 160.Two adjacent n-and p-type FETs fabricated on the same SWCNT with a self-aligned top-gate realized high field mobility simultaneously for electrons(3000 cm2 V-1 s-1) and holes(3300 cm2 V-1 s-1).The CNT FETs also had excellent potential for high-frequency applications,such as a high-performance frequency doubler.展开更多
Currently, the oxygen reduction reaction(ORR) mainly depends on precious metal platinum(Pt) catalysts. However, Pt-based catalysts have several shortcomings, such as high cost, scarcity, and poor long-term stability. ...Currently, the oxygen reduction reaction(ORR) mainly depends on precious metal platinum(Pt) catalysts. However, Pt-based catalysts have several shortcomings, such as high cost, scarcity, and poor long-term stability. Therefore, development of e cient metal-free electrocatalysts to replace Pt-based electrocatalysts is important. In this study, we successfully prepared nitrogen-and fluorinecodoped microporous carbon nanofibers(N, F-MCFs) via electrospinning polyacrylonitrile/polyvinylidene fluoride/polyvinylpyrrolidone(PAN/PVDF/PVP) tricomponent polymers followed by a hydrothermal process and thermal treatment, which was achieved for the first time in the literature. The results indicated that N, F-MCFs exhibit a high catalytic activity(E_(onset): 0.94 V vs. RHE, E_(1/2): 0.81 V vs. RHE, and electron transfer number: 4.0) and considerably better stability and methanol tolerance for ORR in alkaline solutions as compared to commercial Pt/carbon(Pt/C, 20 wt%) catalysts. Furthermore, in acidic media, N, F-MCFs showed a four-electron transfer pathway for ORR. This study provides a new strategy for in situ synthesis of N, F-MCFs as highly e cient metal-free electrocatalysts for ORR in fuel cells.展开更多
Semiconducting carbon nanotubes(CNTs) possess outstanding electrical and optical properties because of their special one-dimen-sional(1D) structure.CNTs are direct bandgap materials,which makes them ideal for use in o...Semiconducting carbon nanotubes(CNTs) possess outstanding electrical and optical properties because of their special one-dimen-sional(1D) structure.CNTs are direct bandgap materials,which makes them ideal for use in optoelectronic devices,e.g.light emitters and light detectors.Excitons determine their light absorption and light emission processes due to the strong Coulomb interactions between electrons and holes in CNTs.In this paper,we review recent progress in CNT photodetectors,photovoltaic devices and light emitters.In particular,we focus on the doping-free CNT optoelectronic devices developed by our group in recent years.展开更多
Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.
A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under envi...A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under environmentally benign reaction conditions. The salient features of this protocol are the short reaction time, ease of product isolation and reusability of the carbon catalyst.展开更多
基金supported by the Creative Research Group of National Science Foundation of China(Grant No.50721003)the Foundation of the Ministry of Education of China for Returned Scholars(Grant No.2005383)
文摘Our work reported that the so-called pure carbon nanotubes(CNTs)can be synthesized without metallic catalyst by chemical vapor deposition(CVD).The as-prepared CNTs have average diameter of 50 nm and length over several microns.Analysis of intermediate objects in the products indicates that their formation mechanism follows the wire-to-tube model.Besides,according to thermodynamic analysis of the driving force combing with experimental results,we find that the thermal gradient can effectively favor the formation of CNTs in our metallic catalyst-free CVD.
基金We gratefully acknowledge the financial support from the Vikram Sarabhai Space Centre,Thiruvananthapuram through ISRO-IITM cell(Project No.ICSR/ISRO-IITM/MET/08-09/122/RAVK).
文摘Polyorganoborosilazane((B[C_(2)H_(4)-Si(CH_(3))NH]_(3))n)was synthesized via monomer route from a single-source precursor and thermolyzed at 1300℃in argon atmosphere.The as-thermolyzed Si-B-C-N ceramic was characterized using X-ray diffraction(XRD)and Raman spectroscopy.The crystallization behavior of silicon carbide in the as-thermolyzed amorphous Si-B-C-N matrix was understood by XRD studies,and the crystallite size calculated using Scherrer equation was found to increase from 2 nm to 8 nm with increase in dwelling time.Concomitantly,Raman spectroscopy was used to characterize the free carbon present in the as-thermolyzed ceramic.The peak positions,intensities and full width at half maximum(FWHM)of D and G bands in the Raman spectra were used to study and understand the structural disorder of the free carbon.The G peak shift towards 1600 cm-1 indicated the decrease in cluster size of the free carbon.The cluster diameter of the free carbon calculated using TK(Tuinstra and Koenl)equation was found to decrease from 6.2 nm to 5.4 nm with increase in dwelling time,indicating increase in structural disorder.
基金supported by the National Key R&D Program of China (2016YFB0600902)the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB17000000)+2 种基金Dalian National Laboratory for Clean Energy (DNL180401)the Youth Innovation Promotion Association CASthe Singapore Ministry of Education Academic Research Fund (AcRF) Tier 1: RG9/17, RG115/17, RG115/18 and Tier 2: MOE2016-T2-2-004
文摘Electrochemical CO2 reduction to chemicals or fuels presents one of the most promising strategies for managing the global carbon balance, which yet poses a significant challenge due to lack of efficient and durable electrocatalyst as well as the understanding of the CO2 reduction reaction(CO2RR) mechanism.Benefiting from the large surface area, high electrical conductivity, and tunable structure, carbon-based metal-free materials(CMs) have been extensively studied as cost-effective electrocatalysts for CO2RR.The development of CMs with low cost, high activity and durability for CO2RR has been considered as one of the most active and competitive directions in electrochemistry and material science.In this review article,some up-to-date strategies in improving the CO2RR performance on CMs are summarized.Specifically, the approaches to optimize the adsorption of CO2RR intermediates, such as tuning the physical and electronic structure are introduced, which can enhance the electrocatalytic activity of CMs effectively.Finally, some design strategies are proposed to prepare CMs with high activity and selectivity for CO2RR.
基金supported by grants from the National Natural Science Foundation of China(Nos.51672205 and 21673169)the National Key R&D Program of China(No.2016YFA0202602)+1 种基金the Research Start-Up Fund from Wuhan University of Technologythe Fundamental Research Funds for the Central Universities(Nos.2016IVA083,2017IB005)
文摘Aqueous hybrid supercapacitors are promising due to their low cost and high safety. Herein, a freestanding battery-type electrode of Bi2O3 nanoflake@C on carbon cloth is designed for aqueous sodium ion hybrid supercapacitors. Due to the integration of nanoarray architecture and the conductive carbon,the Bi2O3@C electrode exhibits a high specific capacity of 207 mAh/g at 2 A/g（6C）, good rate capability and cycling stability（133 m Ah/g after 1000 cycles）. With the activated carbon as the capacitive electrode and neutral sodium salts as the electrolyte, a 1.9 V hybrid supercapacitor is assembled,delivering a high energy density of 18.94 Wh/kg. The device can still maintain 72.3% of initial capacity after 650 cycles. The present work holds great promise for developing next-generation hybrid supercapacitors.
基金China Ocean Mineral Resources Research and Development under contract No.DY125-11-R-04the National Natural Science Foundation of China under contract No.41676036
文摘The carbonate-free fraction of 20 surface sediments collected from the ultraslow-spreading Southwest Indian Ridge(SWIR) was studied by grain size analysis and mineralogical analysis with X-ray powder diffraction(XRD),stereo microscopy and scanning electron microscopy(SEM). The characteristics of the carbonate-free fraction of the sediments were obtained, and related influential factors were discussed. The results show that the mean grain size of this fraction is in 1.96Φ–8.19Φ, with poorly sorting and unimodal, bimodal or irregular bimodal distribution patterns. Four grain size end members of the fraction are derived with the End Member Model method. The finest end member EM1 shows a significant contribution of terrigenous materials of the aeolian input and sediment carried by the bottom current. End member EM2 with medium size mainly reflects sediment of a siliceous bioclast origin. EM3 and EM4 are interpreted as representing the coarser volcanic materials related to bedrock weathering or volcanic activities. Multi-provenance is the dominant factor controlling the grain size pattern of the carbonate-free fraction of the sediments in that area. In addition, sediment transport processes such as the bottom current and wind are the minor factors that influence the grain size distribution of the carbonate-free fraction sediments.
基金supported financially by Youth Foundation of Guangdong Medical College(No.XQ1029)Science and Technology Planning Project of Zhanjiang city(No.2009c3103024)
文摘4-Methylene-1,3-oxazolidin-2-ones can be synthesized from propargylic alcohols, primary amines and carbon dioxide under supercritical condition in the absence of any additional catalyst and solvent. Various propargylic alcohols and primary amines were examined.
基金provided by the National Natural Science Foundation of China(No.21503241,21133010,21261160487,51221264,21411130120,21473223,91545119,91545110)the“Strategic Priority Research Program” of the Chinese Academy of Sciences(CAS)(No.XDA09030103)+1 种基金CAS/State Administration for Foreign Experts Affairs(SAFEA)International Partnership Program for Creative Research Teams and the Doctoral Starting up Foundation of Liaoning Province,China(No.20121068)the financial support from Max Planck Society and China Scholarship Council
文摘A metal-free catalytic system combining oxidized carbon nanotubes (oCNTs) and ionic liquids (ILs) is presented for the oxidation of aromatic thiophene compounds with H2O2 as an oxidant. The oCNTs exhibit impressively high activity and stability in the system, which show an even better performance than those of some reported metal catalysts. The ILs are proved to have indispensable influence on the enhanced catalytic performance of the oCNTs. Detailed characterization by TG-MS and XPS demonstrates that the carbonyl groups are the active sites for the oxidation process, which is further supported by the deactivation and the model catalysts experiments. The quantitative analysis of different oxygen groups in oCNTs could be achieved by an isothermal temperature programmed TG-MS method. The concentration of carbonyl groups is 1.46 mmol per 1 g oCNTs and the tuiriover frequency of oCNTs could also be obtained (10.7 h^-1 in the presence of OmimPF6). H2O2 decomposition experiments combined with the EPR results reveal that the presence of OmimPF6 can avoid the intermediate HO· to form O2 and then improve the catalytic performance of oCNTs for the oxidation of dibenzothiophene.
文摘In this paper, we focus on PHYTOPOROUS, a porous carbon material made entirely from plant-based ingredients, as a new broadband-wave absorber material that acts in the millimeter wave band. We created prototypes of thin rubber-sheet wave absorbers that contain porous carbon (PHYTOPOROUS) made from rice chaff and soybean hulls, which are both agricultural residue products that are generated in large quantities. We investigated the permittivity and reflectance characteristics of this material using the free-space time-domain method. The thin rubber-sheet wave absorber that contained PHYTOPOROUS made from soybean hulls exhibited a frequency band that was approximately 18 GHz wide and centered at 90 GHz. The return loss for this material was greater than −20 dB. This demonstrates that the material provides nearly constant reflection absorption over a wide frequency band.
基金the financial support from the 973 program of China (Grant No. 2014CB932401, 2015CB932500)Beijing Nova Program (Grant No. Z161100004916099)the Tsinghua University Initiative Scientific Research Program (Grant Nos. 20173080001, 20151080367)
文摘Sodium ion batteries （SIBs） are very promising for large-scale energy storage in virtue of its high energy density, abundant sodium resources and low environmental impact, etc. However, it is still a big chal- lenge to develop high-performance and durable cathode materials for SIBs. Among different candidate materials, Na_3V_2（PO_4）_3 has attracted great attentions due to its high theoretical capacity （117 mAh/g）, stable framework structure and excellent ionic conductivity. However, Na_3V_2（PO_4）_3 delivers inferior rate capability and cycling stability due to its poor electronic conductivity. In this work, free-standing Na_3V_2（PO_4）_3/carbon nanofiber membranes are synthesized by an electrospinning-sintering mute. The sample could deliver excellent cycling capability with specific capacity of 112 mAh/g at 1 C after 250 cycles and ultrahigh rate capability with 76.9 mAh/g even at 100 C, which is superior to many state-of- the-art SIB cathode materials. This can be attributed to the hierarchically distributed Na_3V_2（PO_4）_3 crystals in carbon nanofiber network, which possesses outstanding electronicfionic conductivity and thus leads to an ultrahigh rate capabilitY.
文摘Carbon-free basic dry vibration mix was prepared using middle grade magnesia and fused magnesia as main starting materials,metasilicate replacing phenolic resin as binder,adding a certain amount of medium and low temperature intensifiers. Effects of binder,grain composition,and additives on basic dry vibration mix for tundish were studied,and the bonding mechanism was also analyzed. The results show that：（1） when using metasilicate as binder,the higher strength can be acquired; （2） the suitable grain composition is q=0.48,the critical granularity is 5 or 3 mm,the fines addition is 10%-20% （mass percent）; （3） the strength and corrosion resistance of the basic dry vibration mix can be improved by the melting compound of metasilicate and additives; （4） with temperature rising,the bonding type in dry vibration mix changes from cohere bonding to reaction bonding,and then to ceramic bonding at last.
文摘The formation of·CCl3 radicals in liver nuclei was suggested by spin trapping of them with N-t-butyl-α-phenylnitrone followed by GC/MS detection of the resulting adduct. Comparison of its formation in microsomal biotransformation of CCl4 was made. In aerobic nuclear activation mixtures containing NADPH and CCl4, significant decrease in the arachidonic acid content of nuclear lipids was observed (27. 8%, compared to control), the intensity of this decrease was lower than that occurring in the corresponding microsomal incubation mixtures (29.1%). Significant decreases in arachidonic acid content of nuclear and endoplasmic reticulum lipids were also observed in animals at 6 hours of poisoning with the haloalkane. During aerobic nuclear metabolism of CCl4 or CBrCl3, cholesterol oxidation products were detected: a ketocholesterol, an epoxide like structure and 7-ketocholesterol. Nuclear protein carbonyl formation was not promoted during nuclear CCl4 biotransformation. NADPH by itself may lead to protein carbonyl formation during prolonged periods of incubation. CBrCl3 in contrast, led to decreased protein carbonyl formation. No increase in nuclear protein carbonyl formation was observed in CCl4 intoxicated animals during periods of time between 1 to 6 hours after treatment. The results indicate that during nuclear biotransformation of CCl4 or CBrCl3 reactive free radicals, PUFA degradation, reactive aldehydes and cholesterol oxidation products are formed, nearby DNA and regulatory proteins.
文摘Fluorine in mold powder is known as harmful to human health and the environment. Being the advocate of green production, Baosteel developed an environmentally friendly mold powder without fluorine. The main problem of fluorine-free flux film is small heat resistance and thus the heat transfer intensity of the mold is too large, which to some extent hinders the increase of the casting speed. With the heat flow simulation equipment, controlling precipitation of crystal in flux and solidification temperature properly, fluorine-free mold powder for low carbon steel,which substitutes F with B203 ,was successfully developed and applied in industrial production. The production results show that, by using boronic fluorine-free mold powder,the boron increment in molten steel is less than 1.3ppm for conventional aluminium killed low carbon steel.
基金supported by the Ministry of Science and Technology of China (2011CB933001,2011CB933002)the Fundamental Research Funds for Central Universitiesthe National Natural Science Foundation of China (61071013,61001016)
文摘Ballistic n-type carbon nanotube(CNT)-based field-effect transistors(FETs) have been fabricated by contacting semiconducting single-walled CNTs(SWCNTs) using Sc or Y.The n-type CNT FETs were pushed to their performance limits through further optimizing their gate structure and insulator.The CNT FETs outperformed n-type Si metal-oxide-semiconductor(MOS) FETs with the same gate length and displayed better downscaling behavior than the Si MOS FETs.Together with the demonstration of ballistic p-type CNT FETs using Pd contacts,this technological advance is a step toward the doping-free fabrication of CNT-based ballistic complementary metal-oxide-semiconductor(CMOS) devices and integrated circuits.Taking full advantage of the perfectly symmetric band structure of the semiconductor SWCNT,a perfect SWCNT-based CMOS inverter was demonstrated,which had a voltage gain of over 160.Two adjacent n-and p-type FETs fabricated on the same SWCNT with a self-aligned top-gate realized high field mobility simultaneously for electrons(3000 cm2 V-1 s-1) and holes(3300 cm2 V-1 s-1).The CNT FETs also had excellent potential for high-frequency applications,such as a high-performance frequency doubler.
基金funding for this work provided by the National Nature Science Foundation of China (51573090)National Key R&D Program of China (2016YFB0302000)Open Foundation from State Key Laboratory of Fluorinated Functional Membrane Material
文摘Currently, the oxygen reduction reaction(ORR) mainly depends on precious metal platinum(Pt) catalysts. However, Pt-based catalysts have several shortcomings, such as high cost, scarcity, and poor long-term stability. Therefore, development of e cient metal-free electrocatalysts to replace Pt-based electrocatalysts is important. In this study, we successfully prepared nitrogen-and fluorinecodoped microporous carbon nanofibers(N, F-MCFs) via electrospinning polyacrylonitrile/polyvinylidene fluoride/polyvinylpyrrolidone(PAN/PVDF/PVP) tricomponent polymers followed by a hydrothermal process and thermal treatment, which was achieved for the first time in the literature. The results indicated that N, F-MCFs exhibit a high catalytic activity(E_(onset): 0.94 V vs. RHE, E_(1/2): 0.81 V vs. RHE, and electron transfer number: 4.0) and considerably better stability and methanol tolerance for ORR in alkaline solutions as compared to commercial Pt/carbon(Pt/C, 20 wt%) catalysts. Furthermore, in acidic media, N, F-MCFs showed a four-electron transfer pathway for ORR. This study provides a new strategy for in situ synthesis of N, F-MCFs as highly e cient metal-free electrocatalysts for ORR in fuel cells.
基金supported by the National Basic Research Program of China (2011CB933002,2011CB933001)the Fundamental Research Funds for the Central Universitiesthe National Natural Science Foundation of China (61071013,61001016,51072006,60971003)
文摘Semiconducting carbon nanotubes(CNTs) possess outstanding electrical and optical properties because of their special one-dimen-sional(1D) structure.CNTs are direct bandgap materials,which makes them ideal for use in optoelectronic devices,e.g.light emitters and light detectors.Excitons determine their light absorption and light emission processes due to the strong Coulomb interactions between electrons and holes in CNTs.In this paper,we review recent progress in CNT photodetectors,photovoltaic devices and light emitters.In particular,we focus on the doping-free CNT optoelectronic devices developed by our group in recent years.
文摘Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.
文摘A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under environmentally benign reaction conditions. The salient features of this protocol are the short reaction time, ease of product isolation and reusability of the carbon catalyst.
