The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave...The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave infrared wavelengths as beacon light can reduce atmospheric absorption and signal attenuation.However,there are strong non-uniformity and blind pixels in the short-wave infrared image,which makes the image distorted and leads to the decrease of spot centroid positioning accuracy.Therefore,the high-precision localization of the spot centroid of the short-wave infrared images is of great research significance.A high-precision spot centroid positioning model for short-wave infrared is proposed to correct for non-uniformity and blind pixels in short-wave infrared images and quantify the localization errors caused by the two,further model-based localization error simulations are performed,and a novel spot centroid positioning payload for satellite laser communications has been designed using the latest 640×512 planar array InGaAs shortwave infrared detector.The experimental results show that the non-uniformity of the corrected image is reduced from 7%to 0.6%,the blind pixels rejection rate reaches 100%,the frame rate can be up to 2000 Hz,and the spot centroid localization accuracy is as high as 0.1 pixel point,which realizes high-precision spot centroid localization of high-frame-frequency short-wave infrared images.展开更多
Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is...Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is neatly displayed in rows of shops,attracting consumers from across the country.展开更多
We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic st...We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic states are quantum resources in the stabilizer formalism of quantum computation.SIC-POVMs and MUBs are fundamental structures in quantum information theory with many applications in quantum foundations,quantum state tomography,and quantum cryptography,etc.In this work,we study group frames constructed from some prominent magic states,and further investigate their applications.Our method exploits the orbit of discrete Heisenberg-Weyl group acting on an initial fiducial state.We quantify the distance of the group frames from SIC-POVMs and MUBs,respectively.As a simple corollary,we reproduce a complete family of MUBs of any prime dimensional system by introducing the concept of MUB fiducial states,analogous to the well-known SIC-POVM fiducial states.We present an intuitive and direct construction of MUB fiducial states via quantum T-gates,and demonstrate that for the qubit system,there are twelve MUB fiducial states,which coincide with the H-type magic states.We compare MUB fiducial states and SIC-POVM fiducial states from the perspective of magic resource for stabilizer quantum computation.We further pose the challenging issue of identifying all MUB fiducial states in general dimensions.展开更多
This study presents the development of a Magnesium Alloy Seat Frame(MASF),supported by case studies from automotive original equipment manufacturers.The process covers integrated design,simulation,manufacturing,and te...This study presents the development of a Magnesium Alloy Seat Frame(MASF),supported by case studies from automotive original equipment manufacturers.The process covers integrated design,simulation,manufacturing,and testing,aiming to boost industry confidence in Mg alloy applications.A novel structural design is developed that integrates the headrest with the backrest,achieving a balance between lightweight performance and safety.Structural optimization is guided by stress–strain simulations under diverse conditions within a complete forward development process.Casting simulations are conducted to analyze process characteristics,resulting in a verified MASF yield rate exceeding 90%.The final 9.88 kg MASF represents a 24.6%(3.23 kg)weight reduction versus a steel seat.This research contributes to advancements in defect control technology for large die casting magnesium alloy parts and has broad implications for their application in automotive manufacturing.展开更多
To evaluate the dynamic interactions between debris flows,entrained material sources,and infrastructure in the Naojiao Gully watershed of Beijing,and to develop a predictive framework for mitigating geohazard risks th...To evaluate the dynamic interactions between debris flows,entrained material sources,and infrastructure in the Naojiao Gully watershed of Beijing,and to develop a predictive framework for mitigating geohazard risks through energy-based strategies,debris flow dynamics are investigated,a coupled SPH-DEM-FEM multiscale model integrating fluid dynamics(SPH),granular mechanics(DEM),and structural mechanics(FEM)is developed to simulate debris flow propagation,material source behavior,and frame structure responses,and to capture cross-scale failure mechanisms.Key findings include the identification of a critical flow velocity threshold of 12 m/s,beyond which solid-phase kinetic energy dominates,inducing 60%-75%capacity loss in central columns via through-cracking.Furthermore,a novel compound failure criterion is proposed based on the solid-liquid energy proportion.The model achieves a boulder impact force prediction error of only 5.47%,significantly outperforming empirical methods in cross-scale accuracy.An optimized 0.3 m layered configuration experimentally reduces impact pulse peaks by 57%through directed energy redistribution,thereby shifting mitigation strategies from structural reinforcement to media modulation.These results establish a robust framework for quantifying failure thresholds,enhancing predictive precision,and innovating energy-based mitigation.By bridging multiscale modeling gaps in geohazard analysis,this study provides actionable insights for infrastructure resilience in debris flow-prone regions through energycentric design principles.展开更多
Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered secur...Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered security approach is often insufficient for safeguarding sensitive data.This study proposes a triple-lightweight cryptographic and steganographic model that integrates the Hill Cipher Technique(HCT),Rotation Left Digits(RLD),and Discrete Wavelet Transform(DWT)to embed secret messages within video frames securely.The approach begins with encrypting the secret text using a private key matrix(PK^(1))of size 2×2 up to 6×6 via HCT.A second encryption layer is applied using a dynamic private key(PK2)derived from the RGB pixel values of the video frame,resulting in a rotated cipher.The doubly encrypted message is then embedded into the video frames using the DWT method.Upon transmission,the concealed message is extracted using inverse DWT and decrypted in two steps—first with PK2 and then with the inverse of PK^(1).Experiments conducted using MPEG video sequences and message lengths ranging from 10 to 300 bytes demonstrate strong performance in terms of Mean Square Error(MSE),Peak Signal-to-Noise Ratio(PSNR),and Correlation Coefficient(CC)between original and encrypted messages.The similarity between original and stego frames is further validated using Structural Similarity Index(SSIM),Mean Absolute Error(MAE),Number of Pixel Change Rate(NPCR),and Unified Average Changing Intensity(UACI).Results confirm that utilizing video frames to generate PK2 offers superior security compared to static key images.Moreover,the indistinguishability between original and stego frames highlights the method’s robustness against visual and statistical attacks.展开更多
With the rapid growth of China's economic strength,the demand and market share are also constantly increasing.The number ofcars is rapidly increasing,and a large amount of fuel is consumed as a result.The massive ...With the rapid growth of China's economic strength,the demand and market share are also constantly increasing.The number ofcars is rapidly increasing,and a large amount of fuel is consumed as a result.The massive release of vehicle exhaust seriously damages the natural environment,and the environmental crisis is becoming increasingly serious.This article follows the principles of improving fuel efficiency,reducing emissions,andenhancing vehicle performance.Using NX 12.0 software,a three-dimensional model of a certain type of dump truck frame is constructed based on actual parameters.ANSYS Workbench is used to simplify the geometric model,mesh division,and material definition,and a finite element model is constructed.Obtain the structural performance and natural vibration characteristics of the original chassis under four typical working conditions:bending,torsion,lifting,and unloading,through static analysis and modal analysis.On this basis,the dimensions of the components that bear less load on the original frame were optimized,and the topology of the second crossbeam and rear end corner of the subframe that bear less load on the original frame was optimized to obtain a new frame.The new frame of the dump truck underwent secondary static analysis and modal analysis,and it was found that the weight of the new frame decreased by 41.03 kg,successfully reducing the weight of the frame by 4.38%,improving the vehicle's handling and stability,and extending its service life.展开更多
Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,genera...Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,generally,each application requires a specific class of frames and is closely related to quantum measurement.It is worth noting that a maximal set of complex equiangular vectors is closely related to a symmetric informationally complete measurement.Hence,our goal in this work is to propose a series of separability criteria assigned to a finite tight frame and some well-known inequalities in different quantum systems,respectively.In addition,some tighter criteria to detect entanglement for many-body quantum states are presented in arbitrary dimensions.Finally,the effectiveness of the proposed entanglement detection criteria is illustrated through some detailed examples.展开更多
With the development of modern society,people put forward higher requirements for building safety,which makes the construction project face new challenges.Reinforced concrete frame structure as a common engineering ty...With the development of modern society,people put forward higher requirements for building safety,which makes the construction project face new challenges.Reinforced concrete frame structure as a common engineering type,although the construction technology has been relatively mature,but its earthquake collapse ability still needs to be strengthened.This paper analyzes the specific factors that affect the seismic collapse ability of reinforced concrete frame structure,summarizes the previous research results,and puts forward innovative application of fiber-reinforced polymer(FRP)composite materials,play the role of smart materials,improve the isolation and energy dissipation devices,etc.,to promote the continuous optimization of reinforced concrete frame structure design,and show better seismic performance.展开更多
Based on the Etihad Railway Station Project,this study selects a single-span frame bridge with a clear span of 7.3 meters as the research object.A comprehensive structural design process was conducted following the AR...Based on the Etihad Railway Station Project,this study selects a single-span frame bridge with a clear span of 7.3 meters as the research object.A comprehensive structural design process was conducted following the AREMA(2023),Manual for Railway Engineering-Volume 2-Structures,with systematic comparisons of techno-economic differences between the Chinese and American codes through recalculation verification and equivalent-precision design methods.The findings reveal:Recalculation using the Chinese code for identical structural dimensions and reinforcement layouts demonstrates that AREMA code exhibits greater conservatism in both strength requirements and crack control;Under equivalent precision design principles,the Chinese code solution reduces reinforcement by 4.128 t tons and a 19.5%reduction in reinforcement at critical sections compared to the AREMA code,indicating slightly reduced economic efficiency of the AREMA code.This research provides quantitative references for standardized design and specification integration in cross-border railway engineering projects.展开更多
High-voltage electrical post equipment is generally installed on steel supports,which amplifies the seismic inputs and degrades the seismic performance of equipment.This study proposed a variable cross-section damped ...High-voltage electrical post equipment is generally installed on steel supports,which amplifies the seismic inputs and degrades the seismic performance of equipment.This study proposed a variable cross-section damped steel support frame(VCDFS)with viscous dampers to reduce seismic responses of both tall and low-rise electrical equipment.The VCDFS contains a trapezoidal damper layer to generate rocking motions,enabling the diagonal viscous dampers to dissipate seismic inputs.A theoretical model of post equipment with VCDFS is established,and an optimal design procedure is proposed.The analysis shows that the remaining static stiffness ratio λ_(k) is the key parameter that determines the effectiveness of the VCDFS.The VCDFS reduces the average displacement and stress response of a post insulator by 39.4%and 44.6%,respectively,together with a significant decrease in the dynamic amplification factor.Therefore,it is recommended to use the VCDFS instead of the conventional latticed-steel frame in earthquake zones.展开更多
Jiangsu Niupai Machinery&Elecronics Co,ltd.is National Specialized and New"Little Giant"Enterprise,National High&New Technological Enterprise,Jiangsu Provincial Research Center of Loom Shedding Engin...Jiangsu Niupai Machinery&Elecronics Co,ltd.is National Specialized and New"Little Giant"Enterprise,National High&New Technological Enterprise,Jiangsu Provincial Research Center of Loom Shedding Engineering Technology and Jiangsu Provincial Enterprise Technology Center.The company has obtained SGS-certified ISO9001 quality management system,a globally recognized standard.Niupai specializes in the R&D and manufacturing of cam shedding device,dobby shedding device,jacquard shedding device and heald frames for water-jet looms,air-jet looms as well as rapier looms.展开更多
Euler Pole Parameters(EPPs)were estimated for the new plate-fixed North American Terrestrial Reference Frame of 2022(NATRF2022)based on the spherical model of Earth using different sets of continuously operating GPS(c...Euler Pole Parameters(EPPs)were estimated for the new plate-fixed North American Terrestrial Reference Frame of 2022(NATRF2022)based on the spherical model of Earth using different sets of continuously operating GPS(cGPS)station velocities.Two objectives were considered in this research:(1)the possibility of using the cGPS stations located in the areas affected by the Glacial Isostatic Adjustment(GIA),and(2)minimizing the reference frame velocities across the entire continent for conventional uses such as surveying and mapping.A key consideration in this analysis is accounting for the impact of the ongoing GIA on the horizontal velocities.The predicted horizontal velocities from the ICE-6G model were used to remove the GIA effect from the velocity field to mitigate such biases.As a proof of concept,different data sets from a large set of cGPS station velocities were selected,and EPPs were estimated for all these sets of stations with and without removing the GIA effect and estimating or not estimating the Plate Translation Rate(PTR).Considering the WRMS as the criterion for showing goodness of fit,the results show that accounting for the GIA effect reduces the NATRF2022 velocities.Using the same velocity dataset,the PTR was estimated along with the conventional Euler's rotation parameters,and it was shown that estimating the PTR term can further reduce the NATRF2022 velocities.展开更多
To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force...To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force distribution,deformation development,and crack propagation characteristics of a framed anti-sliding structure(FAS)under landslide thrust up to the point of failure.Results show that the maximum bending moment and its increase rate in the fore pile are greater than those in the rear pile,with the maximum bending moment of the fore pile approximately 1.1 times that of the rear pile.When the FAS fails,the displacement at the top of the fore pile is significantly greater,about 1.27 times that of the rear pile in the experiment.Major cracks develop at locations corresponding to the peak bending moments.Small transverse cracks initially appear on the upper surface at the intersection between the primary beam and rear pile and then spread to the side of the structure.At the failure stage,major cracks are observed at the pil-beam intersections and near the anchor points.Strengthening flexural stiffness at intersections where major cracks occur can improve the overall thrust-deformation coordination of the FAS,thereby maximizing its performance.展开更多
基金Supported by the Short-wave Infrared Camera Systems(B025F40622024)。
文摘The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave infrared wavelengths as beacon light can reduce atmospheric absorption and signal attenuation.However,there are strong non-uniformity and blind pixels in the short-wave infrared image,which makes the image distorted and leads to the decrease of spot centroid positioning accuracy.Therefore,the high-precision localization of the spot centroid of the short-wave infrared images is of great research significance.A high-precision spot centroid positioning model for short-wave infrared is proposed to correct for non-uniformity and blind pixels in short-wave infrared images and quantify the localization errors caused by the two,further model-based localization error simulations are performed,and a novel spot centroid positioning payload for satellite laser communications has been designed using the latest 640×512 planar array InGaAs shortwave infrared detector.The experimental results show that the non-uniformity of the corrected image is reduced from 7%to 0.6%,the blind pixels rejection rate reaches 100%,the frame rate can be up to 2000 Hz,and the spot centroid localization accuracy is as high as 0.1 pixel point,which realizes high-precision spot centroid localization of high-frame-frequency short-wave infrared images.
文摘Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is neatly displayed in rows of shops,attracting consumers from across the country.
基金supported by the National Key R&D Program of China,Grant No.2020YFA0712700the National Natural Science Foundation of China‘Mathematical Basic Theory of Quantum Computing’special project,Grant No.12341103。
文摘We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic states are quantum resources in the stabilizer formalism of quantum computation.SIC-POVMs and MUBs are fundamental structures in quantum information theory with many applications in quantum foundations,quantum state tomography,and quantum cryptography,etc.In this work,we study group frames constructed from some prominent magic states,and further investigate their applications.Our method exploits the orbit of discrete Heisenberg-Weyl group acting on an initial fiducial state.We quantify the distance of the group frames from SIC-POVMs and MUBs,respectively.As a simple corollary,we reproduce a complete family of MUBs of any prime dimensional system by introducing the concept of MUB fiducial states,analogous to the well-known SIC-POVM fiducial states.We present an intuitive and direct construction of MUB fiducial states via quantum T-gates,and demonstrate that for the qubit system,there are twelve MUB fiducial states,which coincide with the H-type magic states.We compare MUB fiducial states and SIC-POVM fiducial states from the perspective of magic resource for stabilizer quantum computation.We further pose the challenging issue of identifying all MUB fiducial states in general dimensions.
基金supported in part by the project is supported partly by National Key Research and Development Program of China(no.2022YFB2503504)Chongqing Technology Innovation and Application Development Project(no.CSTB2022TIAD-DEX0011)China Scholarship Council.
文摘This study presents the development of a Magnesium Alloy Seat Frame(MASF),supported by case studies from automotive original equipment manufacturers.The process covers integrated design,simulation,manufacturing,and testing,aiming to boost industry confidence in Mg alloy applications.A novel structural design is developed that integrates the headrest with the backrest,achieving a balance between lightweight performance and safety.Structural optimization is guided by stress–strain simulations under diverse conditions within a complete forward development process.Casting simulations are conducted to analyze process characteristics,resulting in a verified MASF yield rate exceeding 90%.The final 9.88 kg MASF represents a 24.6%(3.23 kg)weight reduction versus a steel seat.This research contributes to advancements in defect control technology for large die casting magnesium alloy parts and has broad implications for their application in automotive manufacturing.
基金funded by the Natural Science Foundation of Hebei Province(D2025201012)Highlevel Innovative Talents Program of Hebei University(Grant No.521100222055)President's Fund of Hebei University(Grant No.XZJJ202205)。
文摘To evaluate the dynamic interactions between debris flows,entrained material sources,and infrastructure in the Naojiao Gully watershed of Beijing,and to develop a predictive framework for mitigating geohazard risks through energy-based strategies,debris flow dynamics are investigated,a coupled SPH-DEM-FEM multiscale model integrating fluid dynamics(SPH),granular mechanics(DEM),and structural mechanics(FEM)is developed to simulate debris flow propagation,material source behavior,and frame structure responses,and to capture cross-scale failure mechanisms.Key findings include the identification of a critical flow velocity threshold of 12 m/s,beyond which solid-phase kinetic energy dominates,inducing 60%-75%capacity loss in central columns via through-cracking.Furthermore,a novel compound failure criterion is proposed based on the solid-liquid energy proportion.The model achieves a boulder impact force prediction error of only 5.47%,significantly outperforming empirical methods in cross-scale accuracy.An optimized 0.3 m layered configuration experimentally reduces impact pulse peaks by 57%through directed energy redistribution,thereby shifting mitigation strategies from structural reinforcement to media modulation.These results establish a robust framework for quantifying failure thresholds,enhancing predictive precision,and innovating energy-based mitigation.By bridging multiscale modeling gaps in geohazard analysis,this study provides actionable insights for infrastructure resilience in debris flow-prone regions through energycentric design principles.
文摘Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered security approach is often insufficient for safeguarding sensitive data.This study proposes a triple-lightweight cryptographic and steganographic model that integrates the Hill Cipher Technique(HCT),Rotation Left Digits(RLD),and Discrete Wavelet Transform(DWT)to embed secret messages within video frames securely.The approach begins with encrypting the secret text using a private key matrix(PK^(1))of size 2×2 up to 6×6 via HCT.A second encryption layer is applied using a dynamic private key(PK2)derived from the RGB pixel values of the video frame,resulting in a rotated cipher.The doubly encrypted message is then embedded into the video frames using the DWT method.Upon transmission,the concealed message is extracted using inverse DWT and decrypted in two steps—first with PK2 and then with the inverse of PK^(1).Experiments conducted using MPEG video sequences and message lengths ranging from 10 to 300 bytes demonstrate strong performance in terms of Mean Square Error(MSE),Peak Signal-to-Noise Ratio(PSNR),and Correlation Coefficient(CC)between original and encrypted messages.The similarity between original and stego frames is further validated using Structural Similarity Index(SSIM),Mean Absolute Error(MAE),Number of Pixel Change Rate(NPCR),and Unified Average Changing Intensity(UACI).Results confirm that utilizing video frames to generate PK2 offers superior security compared to static key images.Moreover,the indistinguishability between original and stego frames highlights the method’s robustness against visual and statistical attacks.
文摘With the rapid growth of China's economic strength,the demand and market share are also constantly increasing.The number ofcars is rapidly increasing,and a large amount of fuel is consumed as a result.The massive release of vehicle exhaust seriously damages the natural environment,and the environmental crisis is becoming increasingly serious.This article follows the principles of improving fuel efficiency,reducing emissions,andenhancing vehicle performance.Using NX 12.0 software,a three-dimensional model of a certain type of dump truck frame is constructed based on actual parameters.ANSYS Workbench is used to simplify the geometric model,mesh division,and material definition,and a finite element model is constructed.Obtain the structural performance and natural vibration characteristics of the original chassis under four typical working conditions:bending,torsion,lifting,and unloading,through static analysis and modal analysis.On this basis,the dimensions of the components that bear less load on the original frame were optimized,and the topology of the second crossbeam and rear end corner of the subframe that bear less load on the original frame was optimized to obtain a new frame.The new frame of the dump truck underwent secondary static analysis and modal analysis,and it was found that the weight of the new frame decreased by 41.03 kg,successfully reducing the weight of the frame by 4.38%,improving the vehicle's handling and stability,and extending its service life.
基金supported by the Natural Science Foundation of Sichuan Province(Grant No.25QNJJ4066)。
文摘Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,generally,each application requires a specific class of frames and is closely related to quantum measurement.It is worth noting that a maximal set of complex equiangular vectors is closely related to a symmetric informationally complete measurement.Hence,our goal in this work is to propose a series of separability criteria assigned to a finite tight frame and some well-known inequalities in different quantum systems,respectively.In addition,some tighter criteria to detect entanglement for many-body quantum states are presented in arbitrary dimensions.Finally,the effectiveness of the proposed entanglement detection criteria is illustrated through some detailed examples.
文摘With the development of modern society,people put forward higher requirements for building safety,which makes the construction project face new challenges.Reinforced concrete frame structure as a common engineering type,although the construction technology has been relatively mature,but its earthquake collapse ability still needs to be strengthened.This paper analyzes the specific factors that affect the seismic collapse ability of reinforced concrete frame structure,summarizes the previous research results,and puts forward innovative application of fiber-reinforced polymer(FRP)composite materials,play the role of smart materials,improve the isolation and energy dissipation devices,etc.,to promote the continuous optimization of reinforced concrete frame structure design,and show better seismic performance.
文摘Based on the Etihad Railway Station Project,this study selects a single-span frame bridge with a clear span of 7.3 meters as the research object.A comprehensive structural design process was conducted following the AREMA(2023),Manual for Railway Engineering-Volume 2-Structures,with systematic comparisons of techno-economic differences between the Chinese and American codes through recalculation verification and equivalent-precision design methods.The findings reveal:Recalculation using the Chinese code for identical structural dimensions and reinforcement layouts demonstrates that AREMA code exhibits greater conservatism in both strength requirements and crack control;Under equivalent precision design principles,the Chinese code solution reduces reinforcement by 4.128 t tons and a 19.5%reduction in reinforcement at critical sections compared to the AREMA code,indicating slightly reduced economic efficiency of the AREMA code.This research provides quantitative references for standardized design and specification integration in cross-border railway engineering projects.
基金Guangdong Basic and Applied Basic Research Foundation under Grant Nos.2022A1515110561 and 2023A1515010072Natural Science Foundation of China under Grant Nos.52308488 and 52378499。
文摘High-voltage electrical post equipment is generally installed on steel supports,which amplifies the seismic inputs and degrades the seismic performance of equipment.This study proposed a variable cross-section damped steel support frame(VCDFS)with viscous dampers to reduce seismic responses of both tall and low-rise electrical equipment.The VCDFS contains a trapezoidal damper layer to generate rocking motions,enabling the diagonal viscous dampers to dissipate seismic inputs.A theoretical model of post equipment with VCDFS is established,and an optimal design procedure is proposed.The analysis shows that the remaining static stiffness ratio λ_(k) is the key parameter that determines the effectiveness of the VCDFS.The VCDFS reduces the average displacement and stress response of a post insulator by 39.4%and 44.6%,respectively,together with a significant decrease in the dynamic amplification factor.Therefore,it is recommended to use the VCDFS instead of the conventional latticed-steel frame in earthquake zones.
文摘Jiangsu Niupai Machinery&Elecronics Co,ltd.is National Specialized and New"Little Giant"Enterprise,National High&New Technological Enterprise,Jiangsu Provincial Research Center of Loom Shedding Engineering Technology and Jiangsu Provincial Enterprise Technology Center.The company has obtained SGS-certified ISO9001 quality management system,a globally recognized standard.Niupai specializes in the R&D and manufacturing of cam shedding device,dobby shedding device,jacquard shedding device and heald frames for water-jet looms,air-jet looms as well as rapier looms.
文摘Euler Pole Parameters(EPPs)were estimated for the new plate-fixed North American Terrestrial Reference Frame of 2022(NATRF2022)based on the spherical model of Earth using different sets of continuously operating GPS(cGPS)station velocities.Two objectives were considered in this research:(1)the possibility of using the cGPS stations located in the areas affected by the Glacial Isostatic Adjustment(GIA),and(2)minimizing the reference frame velocities across the entire continent for conventional uses such as surveying and mapping.A key consideration in this analysis is accounting for the impact of the ongoing GIA on the horizontal velocities.The predicted horizontal velocities from the ICE-6G model were used to remove the GIA effect from the velocity field to mitigate such biases.As a proof of concept,different data sets from a large set of cGPS station velocities were selected,and EPPs were estimated for all these sets of stations with and without removing the GIA effect and estimating or not estimating the Plate Translation Rate(PTR).Considering the WRMS as the criterion for showing goodness of fit,the results show that accounting for the GIA effect reduces the NATRF2022 velocities.Using the same velocity dataset,the PTR was estimated along with the conventional Euler's rotation parameters,and it was shown that estimating the PTR term can further reduce the NATRF2022 velocities.
基金The National Natural Science Foundation of China(No.52078427).
文摘To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force distribution,deformation development,and crack propagation characteristics of a framed anti-sliding structure(FAS)under landslide thrust up to the point of failure.Results show that the maximum bending moment and its increase rate in the fore pile are greater than those in the rear pile,with the maximum bending moment of the fore pile approximately 1.1 times that of the rear pile.When the FAS fails,the displacement at the top of the fore pile is significantly greater,about 1.27 times that of the rear pile in the experiment.Major cracks develop at locations corresponding to the peak bending moments.Small transverse cracks initially appear on the upper surface at the intersection between the primary beam and rear pile and then spread to the side of the structure.At the failure stage,major cracks are observed at the pil-beam intersections and near the anchor points.Strengthening flexural stiffness at intersections where major cracks occur can improve the overall thrust-deformation coordination of the FAS,thereby maximizing its performance.
