The final fractural forms and variation status of hard inclusion samples under biaxial compression have been primarily studied in this paper. The lateral fractural forms of samples are mainly compressive shear fractu...The final fractural forms and variation status of hard inclusion samples under biaxial compression have been primarily studied in this paper. The lateral fractural forms of samples are mainly compressive shear fracture, two kinds appear on surface: one is strike slip fault with reversed thrust, and another is thrust. Some hard inclusions rupture and some do not while hard contact serves between hard inclusions and sample; main fracture bypasses hard inclusion while soft contact serves. Finally, process of stress concentration, yield, softening until failure for hard inclusions have been analysed under a certain condition.展开更多
The Lankao-Liaocheng Fractural Zone is a large-seade NNE-trending struetural zone in the North China Crustoblock. Dated from the Late Arehean-Early Proterozoie, it is stil1 active now. Its nature varied with time in i...The Lankao-Liaocheng Fractural Zone is a large-seade NNE-trending struetural zone in the North China Crustoblock. Dated from the Late Arehean-Early Proterozoie, it is stil1 active now. Its nature varied with time in its developing process. It has became a tensile ultralithospherie fraetural zone at present or in diwa residual-mobility period. Some cenozoic oil-gas-bearing basins are distributed along the fraetural zone which fomed an important oil-gas accumulating belt in the North China Ctustoblock.展开更多
The solidification features,micro segregation,and fracture characteristics of cobalt based alloy on the substrate of 20CrMo steel by laser cladding were studied by using electron microscopy.Experimental results show...The solidification features,micro segregation,and fracture characteristics of cobalt based alloy on the substrate of 20CrMo steel by laser cladding were studied by using electron microscopy.Experimental results show that the fine columnar grains and cellular dendrite grains are obtained which are perpendicular to the coating/substrate interface;the primary arms are straight while the side branches are degenerated;the microstructure consists of primary face centered cubic (fcc) Co dendrites and a network of Cr enriched eutectic M23C6 (M=Cr,W,Fe) carbides;the micro segregation is severe for the rapid heating and cooling of laser cladding;the typical brittle intergranular fracture occurs in cobalt based laser cladding layer.展开更多
Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively invest...Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.展开更多
Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current ev...Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current evidence on diagnostic protocols and management strategies,highlighting optimal approaches and emerging trends.Initial care emphasizes soft tissue assessment,often guided by the Tscherne classification,and fracture classification systems.External fixation may be required in open injuries,while early open reduction and internal fixation within six days is linked to improved outcomes.Minimally invasive techniques for the lateral malleolus,including intramedullary nailing and locking plates,are effective,while medial malleolus fractures are commonly managed with screw fixation or tension-band wiring.Posterior malleolus fragments involving more than 25%of the articular surface usually warrant fixation.Alternatives to syndesmotic screws,such as cortical buttons or high-strength sutures,reduce the need for secondary procedures.Arthroscopic-assisted open reduction and internal fixation benefits younger,active patients by enabling concurrent management of intra-articular and ligamentous injuries.Postoperative care prioritizes early weight-bearing and validated functional scores.Despite advances,complications remain common,and further research is needed to refine surgical strategies and improve outcomes.展开更多
To investigate the fracture initiation and propagation behavior of fractures in tight sandstone under the supercritical CO_(2)(SCCO_(2))shock fracturing,laboratory fracturing experiments were conducted using a true-tr...To investigate the fracture initiation and propagation behavior of fractures in tight sandstone under the supercritical CO_(2)(SCCO_(2))shock fracturing,laboratory fracturing experiments were conducted using a true-triaxial-like SCCO_(2)shock fracturing system.Computed tomography(CT)scanning and three-dimensional fracture reconstruction were employed to elucidate the effects of shock pressure,pore pressure,and in-situ stress on fracture characteristics.In addition,nuclear magnetic resonance(NMR)transverse relaxation time spectra were used to assess the internal damage induced by SCCO_(2)shock fracturing.The results indicate that,compared with conventional hydraulic fracturing and SCCO_(2)quasi-static fracturing,SCCO_(2)shock fracturing facilitates multidirectional fracture initiation and the formation of complex fracture networks.Increasing shock pressure more readily activates bedding-plane weaknesses,with main and subsidiary fractures interweaving into a dense fracture network.Under the same impulse intensity,elevated pore pressure reduces the effective normal stress and alters stress-wave scattering paths,thereby inducing more branch fractures and enhancing fracture complexity.An increase in differential in-situ stress promotes fracture propagation along the direction of the maximum principal stress,reduces branching,and simplifies fracture morphology.With increasing SCCO_(2)shock pressure,pore volume and connectivity generally increase:small-to-medium pores primarily respond through increased number and enhanced connectivity;when the shock pressure rises to 40-45 MPa,crack coalescence generates larger pores and fissures,which play a dominant role in improving flow pathways and effective storage space,ultimately forming a multiscale pore-fracture network.展开更多
Taking the underground shale of the Silurian Longmaxi Formation in southern Sichuan Basin as the research object,stress-sensitive experiments on self-supporting fractures and micro-visualization experiments on gas-wat...Taking the underground shale of the Silurian Longmaxi Formation in southern Sichuan Basin as the research object,stress-sensitive experiments on self-supporting fractures and micro-visualization experiments on gas-water flow were conducted under simulated reservoir conditions to study the mechanism of microscopic gas-water flow during the fracture closure process and discuss its engineering applications.The results show that as the effective stress gradually increased from 5 MPa to 60 MPa with an increment of 5 MPa per step,the self-supporting fracture closure exhibited a two-stage characteristic of being fast in the early stage and slow in the later stage,with the inflection point stress ranging from 32 MPa to 35 MPa,and the closure degree of 47%-76%.The effective stress increase gradually rose from 5 MPa per step to 20 MPa per step,and the early fracture closure accelerated,with the maximum closure degree increasing by 8.6%.As the fracture width decreased from 500μm to 50μm,the gas-phase shifted from continuous to discontinuous flow,and the proportion of the critical gas-phase flow to maintain the continuous gas-phase flow increased.In the early stage of fracture closure(fracture width greater than 300μm),the continuous gas-phase flow is controlled by the fracture width-the larger the fracture width,the smaller the proportion of the critical gas-phase flow to maintain the continuous gas-phase flow.In the late stage of fracture closure(fracture width less than 300μm),as the fractures continue to close,the dominant role of the surface roughness of the fractures becomes stronger,and the proportion of the critical gas-phase flow to maintain the continuous gas-phase flow exceeds 70%.A reasonable pressure control during stable production and pressure reduction in the early stage(the peak pressure drop at the wellhead is less than 32 MPa)to delay the self-supporting fracture closure is conducive to the stable and increased production of gas wells.展开更多
The research presented in this paper aimed to analyze the evolution of fractures in strata in relation to the progress of longwall mining.To achieve this objective,an introscopic probe equipped with a highresolution c...The research presented in this paper aimed to analyze the evolution of fractures in strata in relation to the progress of longwall mining.To achieve this objective,an introscopic probe equipped with a highresolution camera was developed,along with additional equipment that enables continuous recording of the internal surfaces of drainage boreholes exceeding 100 m in depth.The probe was utilized to test two methane drainage boreholes in the Z-3b longwall,which operates within the 501/3 coal seam of the Jankowice mine in Poland.Automatic image analysis methods were applied to evaluate the recorded images,based on a newly developed classificationsystem for fractures categorized by size and number.The results were compared with an analysis of changes in the methane capture rate from the drainage boreholes,which correlated with longwall mining progress.A strong correlation was observed between the number of fractures and the lithology of the strata layers.The largest number of fractures and their evolution were recorded in the coal layers,followed by the shale layers,while the sandstone layers exhibited the least number of fractures.Based on parallel measurements of the methane capture rate from the drainage boreholes during the progress of longwall mining,the extent of the strata's fracture zone was determined to range from 6 m to 36 m.Within the fracture zone,the strata are highly fractured,which leads to an increase in methane emissions through seepage and diffusion processes.展开更多
BACKGROUND:Maxillofacial trauma represents a significant challenge in emergency medicine,requiring both diagnostic accuracy and prompt intervention while balancing immediate life-saving interventions with preservation...BACKGROUND:Maxillofacial trauma represents a significant challenge in emergency medicine,requiring both diagnostic accuracy and prompt intervention while balancing immediate life-saving interventions with preservation of function and aesthetics.The complex anatomy of this region,with its proximity to critical structures,demands a thorough understanding of assessment and management principles.This narrative review aims to provide evidence-based guidelines for emergency physicians managing maxillofacial trauma,with particular emphasis on early recognition of critical injuries,airway management strategies,and special population considerations.METHODS:A narrative review was conducted via a comprehensive literature search of the PubMed and Scopus databases,which focused on maxillofacial trauma management in emergency settings.Articles were selected based on relevance to clinical practice,methodological quality,and current management guidelines.The review synthesized evidence from multiple study types,including original research,systematic reviews,and clinical practice guidelines,to provide practical guidance for emergency physicians.RESULTS:Initial assessment following Advanced Trauma Life Support(ATLS)principles is crucial,with airway management being a primary concern due to the risk of dynamic obstruction.Critical time-sensitive emergencies include orbital compartment syndrome,trapdoor fractures(in pediatric patients),and facial nerve injuries.Computed tomography(CT)imaging remains the gold standard for diagnosis.Special considerations are required for pediatric patients,who present unique anatomical challenges and injury patterns,and for elderly patients,who often have complex medical comorbidities and increased complication risks.Management strategies range from conservative treatment to urgent surgical intervention,with decisions based on the injury pattern and associated complications.CONCLUSION:Emergency physicians must maintain a structured yet fl exible approach to maxillofacial trauma,focusing on early recognition of critical injuries,appropriate airway management,and timely specialist consultation.Understanding injury patterns and their potential complications allows for eff ective risk stratifi cation and treatment planning,ultimately improving patient outcomes.展开更多
The effective channeling of fluid flow by fractures is a liability for enhanced oil recovery(EOR)methods like CO_(2) flooding or CO_(2) storage.Developing a distributed fracture model to understand the heterogeneity o...The effective channeling of fluid flow by fractures is a liability for enhanced oil recovery(EOR)methods like CO_(2) flooding or CO_(2) storage.Developing a distributed fracture model to understand the heterogeneity of the fracture network is essential in characterizing tight and low-permeability reservoirs.In the Ordos Basin,the Chang 8-1-2 layer of the Yanchang Formation is a typical tight and low permeability reservoir in the JH17 wellblock.The strong heterogeneity of distributed fractures,differing fracture scales and fracture types make it difficult to effectively characterize the fracture distribution within the Chang 8-1-2 layer.In this paper,multi-source and multi-attribute methods are used to integrate data into a neural network at different scales,and fuzzy logic control is used to judge the correlation of various attributes.The results suggest that attribute correlation between coherence and fracture indication is the best,followed by correlations with fault distance,north–south slope,and north–south curvature.Advantageous attributes from the target area are used to train the neural network,and the fracture density model and discrete fracture network(DFN)model are built at different scales.This method can be used to effectively predict the distribution characteristics of fractures in the study area.And any learning done by the neural network from this case study can be applied to fracture network modeling for reservoirs of the same type.展开更多
The migration,accumulation,and high yield of hydrocarbons in tight sandstone reservoirs are closely tied to the natural fracture systems within the reservoirs.Large-scale fracture networks not only enhance reservoir s...The migration,accumulation,and high yield of hydrocarbons in tight sandstone reservoirs are closely tied to the natural fracture systems within the reservoirs.Large-scale fracture networks not only enhance reservoir seepage capacity but also influence effective productivity and subsequent fracturing reconstruction.Given the diverse mechanical behaviors,such as migration,penetration,or fracture arrest,traditional assumptions about fracture interaction criteria fail to address this complexity.To resolve these issues,a global cohesive element method is proposed to model random natural fractures.This approach verifies intersection models based on real-time stress conditions rather than pre-set criteria,enabling better characterization of interactions between hydraulic and natural fractures.Research has shown that the elastic modulus,horizontal stress difference,and fracturing fluid pumping rate significantly promote the expansion of hydraulic fractures.The use of low viscosity fracturing fluid can observe a decrease in the width of fractures near the wellbore,which may cause fractures to deflect when interacting with natural fractures.However,simulations under these conditions did not form a“complex network of fractures”.It is worth noting that when the local stress difference is zero,the result is close to the formation of this network.Excessive spacing will reduce the interaction between fractures,resulting in a decrease in the total length of fractures.By comprehensively analyzing these factors,an optimal combination can be identified,increasing the likelihood of achieving a“complex fracture network”.This paper thoroughly investigates hydraulic fracture propagation in naturally fractured reservoirs under various conditions,offering insights for developing efficient fracturing methods.展开更多
Re-fracturing horizontal wells is a critical strategy for enhancing recovery from tight oil reservoirs,but its success depends on the evaluation of candidate wells and locations.This process is complicated by producti...Re-fracturing horizontal wells is a critical strategy for enhancing recovery from tight oil reservoirs,but its success depends on the evaluation of candidate wells and locations.This process is complicated by production-induced alterations in reservoir pressure and geomechanical responses.This study introduces a workflow to evaluate re-fracturing potential by integrating coupled fluid flow and geomechanical modeling for the production of initial hydraulic fractures.We developed a numerical model that simulates the poroelastic response of a tight oil reservoir to depletion from an initial set of hydraulic fractures.To quantify the re-fracturing potential along the horizontal wellbore,a novel composite re-fracturing potential index is proposed where fracture shape,stress,and pressure are considered.This index considers four key physical factors:current reservoir pressure,fracture initiation ease,fracture geometry favorability,and fracture propagation efficiency considering tortuosity.Numerical simulations were conducted for scenarios with both uniform and non-uniform initial hydraulic fractures.The results consistently demonstrate that the optimal locations for re-fracturing are the midpoints between existing fractures,where a favorable balance of high reservoir pressure and altered stress conditions exists.The analysis reveals that the overall re-fracturing potential tends to increase with production time,suggesting that a period of depletion can enhance the geomechanical conditions for subsequent stimulation.Furthermore,a sensitivity analysis on the index weighting factors shows that the optimum re-fracturing strategy is highly dependent on the primary field objective,whether it is maximizing resource contact,ensuring geomechanical feasibility,or avoiding operational complexity.The study concludes that heterogeneity in the initial fracture network creates complex and asymmetric potential profiles,which implies the necessity of case-specific and integrated analysis over simplified assumptions.The proposed methodology provides a framework for optimizing re-fracturing designs in tight oil reservoirs.展开更多
This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investig...This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.展开更多
The forward model of optical fiber strain induced by fractures,together with the associated model resolution matrix,is used to demonstrate the interpretability of fracture parameters once the fracture intersects the f...The forward model of optical fiber strain induced by fractures,together with the associated model resolution matrix,is used to demonstrate the interpretability of fracture parameters once the fracture intersects the fiber.A regularized inversion framework for fracture parameters is established to evaluate the influence of measured data quality on the accuracy of iterative regularized inversion.An interpretation approach for both fracture width and height is proposed,and the synthetic forward data with measurement error and field examples are employed to validate the accuracy of the simultaneous inversion of fracture width and height.The results indicate that,after the fracture contacts the fiber,the strain response is strongly sensitive only to the fracture parameters at the intersection location,whereas the interpretability of parameters at other locations remains limited.The iterative regularized inversion method effectively suppresses the impact of measurement error and exhibits high computational efficiency,showing clear advantages for inversion applications.When incorporating the first-order regularization with a Neumann boundary constraint on the tip width,the inverted fracture-width distribution becomes highly sensitive to fracture height;thus,combined with a bisection strategy,simultaneous inversion of fracture width and height can be achieved.Examination using the model resolution matrix,noisy synthetic data,and field data confirms that the iterative regularized inversion model for fracture width and height provides high interpretive accuracy and can be applied to the calculation and analysis of fracture width,fracture height,net pressure and other parameters.展开更多
Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagati...Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.展开更多
A three-dimensional multiphase particle-in-cell(MP-PIC)method was adopted to establish a liquid-solid two-phase flow model accounting for complex fracture networks.The model was validated using physical experimental d...A three-dimensional multiphase particle-in-cell(MP-PIC)method was adopted to establish a liquid-solid two-phase flow model accounting for complex fracture networks.The model was validated using physical experimental data.On this basis,the main factors influencing proppant transport in fracture network were analyzed.The study shows that proppant transport in fracture network can be divided into three stages:initial filling,dominant channel formation and fracture network extension.These correspond to three transport patterns:patch-like accumulation near the wellbore,preferential placement along main fractures,and improved the coverage of planar placement as fluid flows into branch fractures.Higher proppant density,lower fracturing fluid viscosity,lower injection rate,and larger proppant grain size result in shorter proppant transport distance and smaller planar placement coefficient.The use of low-density,small-diameter proppant combined with high-viscosity fracturing fluid and appropriately increased injection rate can effectively enlarge the stimulated volume.A smaller angle between the main fracture and branch fractures leads to longer proppant banks,broader coverage,more uniform distribution,and better stimulation performance in branch fractures.In contrast,a larger angle increases the likelihood of proppant accumulation near the branch fracture entrance and reduces the planar placement coefficient.展开更多
Self-suspended proppants,which enable clear-water fracturing,represent a promising new class of materials for reservoir stimulation.Given the economic limitations associated with their exclusive use,this study investi...Self-suspended proppants,which enable clear-water fracturing,represent a promising new class of materials for reservoir stimulation.Given the economic limitations associated with their exclusive use,this study investigates proppant transport behavior in hybrid systems combining self-suspended proppants with conventional 40/70 mesh quartz sand at various mixing ratios.A dedicated experimental apparatus was developed to replicate field-relevant complex fracture networks,consisting of a main fracture and two branching fractures with different deflection angles.Using this system,sand bank formation and proppant distribution were examined for both conventional quartz sand fracturing and fracturing augmented with self-suspended proppants.The effects of slurry discharge volume,proppant mixing ratio,sand ratio,and injection location of the self-suspended proppant on transport and placement behavior were systematically analyzed.According to the results,the incorporation of self-suspended proppants markedly enhances the proppant-carrying capacity of the slurry and substantially modifies sand bank morphology.Increasing the discharge volume raises the inlet slope angle and promotes greater proppant penetration into branch fractures.The proportion of self-suspended proppant governs slurry viscoelasticity and,consequently,proppant settling behavior.As the fraction of self-suspended proppant decreases,the equilibrium height of the sand bank increases,while the proppant mass fraction within branch fractures exhibits a non-monotonic response,initially decreasing and then increasing.Variations in sand ratio alter both overall proppant concentration and the self-suspended proppant-to-water ratio,thereby modulating slurry rheology and influencing proppant placement.In addition,changes in injection location affect near-wellbore vortex structures,leading to distinct sand bank morphologies.展开更多
After coal seam mining,the overlying rock strata above the goaf are subjected to long-term stress and eventually undergo failure.Under mining-induced disturbances,the strata develop fractures at various angles,which s...After coal seam mining,the overlying rock strata above the goaf are subjected to long-term stress and eventually undergo failure.Under mining-induced disturbances,the strata develop fractures at various angles,which significantly influence failure modes and the morphology of gas flow channels.This study employed multistage loading experiments,numerical simulations,three-dimensional reconstruction,and image recognition to investigate the fragmentation process of rocks with different initial fracture angles under multistage loading.The results show that variations in the initial fracture angle affect the transmission of contact forces among rock particles.As the angle increases,the transmission pattern shifts from a uniform distribution to one extending along the direction of the fracture.Rocks with small initial fracture angles tend to experience tensile-dominated failure,with most of the material subjected to longitudinal loading,resulting in reduced strength.Fractures propagate from the central region of the initial fracture,producing a complex internal fracture network.The proportion of fracture channels varies considerably across regions,creating multiple zones of velocity variation in the gas flow.In contrast,rocks with large initial fracture angles are more susceptible to shear failure,with the primary load-bearing zones aligned along the inclined fracture direction.As a result,the influence on surrounding regions is limited,improving the rock's load-bearing capacity under multistage loading.In these cases,the distribution and proportion of fracture channels become more uniform,promoting more stable gas flow within the channels.Overall,these findings provide theoretical insights into how initial fracture angles govern rock failure patterns and gas flow characteristics.展开更多
The increase in CO_(2)injectivity and shifting of CO_(2)-absorbing layers in multilayered geological CO_(2)sequestration(GCS)reservoirs in Ordos,China indicate significantpermeability variations in certain layers.To c...The increase in CO_(2)injectivity and shifting of CO_(2)-absorbing layers in multilayered geological CO_(2)sequestration(GCS)reservoirs in Ordos,China indicate significantpermeability variations in certain layers.To capture these system changes,a numerical model incorporating all 21 aquifers and internal aquitards was developed.The monitored pressure was well matched through multiphase and thermalhydraulic-mechanical(THM)coupling numerical simulations by introducing permeability variations.The results revealed that the permeability in the second layer increased on approximately day 13 due to the abrupt pressure buildup and temperature decrease.Even such a low rate of CO_(2)(2.8 kg/s)injected into the low permeability system initiated some fractures and the permeability in the second layer around the wellbore increased by 722 times.The second critical system change occurred on approximately day 386.As demonstrated in the numerical simulation,the substantial injection of cold CO_(2)induced strong thermal stress,leading to rock contraction and the initiation of several cracks.The permeability of the firstlayer around the wellbore unexpectedly increased by 4 orders of magnitude.Since no additional pressure could drive the CO_(2)into the remaining 17 layers,the total storage capability of the multilayered system was reduced.A whole picture of the system variation is fully presented and the underlying mechanisms are analyzed.It is believed that the phenomenon of thermal-hydraulic fracturing observed in this fieldand the simulation procedures will benefitother fluidinjection and production works in various geotechnical settings.展开更多
Background:Biological osteosynthesis preserves blood supply and promotes rapid healing by aligning fracture fragments without direct surgical exposure.Pedicle screws are primarily designed for internal fixation in spi...Background:Biological osteosynthesis preserves blood supply and promotes rapid healing by aligning fracture fragments without direct surgical exposure.Pedicle screws are primarily designed for internal fixation in spinal procedures.A key objec-tive of many orthopedic studies is to assess the biocompatibility of implants with bone and adjacent soft tissue.This study aims to evaluate the biocompatibility and effects of the Pedicle screw-Rod configuration as a novel external fixation method in canine tibial osteotomy.Methods:With ethics approval,eight healthy,intact male dogs,aged 10-12 months and weighing between 20 and 22 kg,underwent a minimally invasive medial tibial approach for surgical fixation of tibial osteotomy using a Pedicle screw-Rod configu-ration.Postoperative evaluations included ultrasound assessments at the osteotomy site and histological evaluations at the bone-screw interface.Results:B-mode ultrasound evaluation indicated healing progress at all osteotomy sites.The color Doppler examination revealed an initial increase in signals in the sur-rounding soft tissue during the first 4 weeks post-operation,followed by a decrease in signals within the adjacent soft tissue between the 5th and 8th weeks.During this latter period,the signals were primarily concentrated on the bone surface and the callus.The bone-screw interface at various screw sites exhibited similar histological changes,indicating effective integration of the newly formed woven bone into the screw threads.Conclusions:Fixation of non-articular tibial osteotomy with Pedicle screw-Rod con-figuration resulted in secondary bone healing,characterized by abundant callus for-mation and neovascularization.This implant demonstrated favorable biocompatibility with bone and surrounding soft tissue,without significant complications.展开更多
文摘The final fractural forms and variation status of hard inclusion samples under biaxial compression have been primarily studied in this paper. The lateral fractural forms of samples are mainly compressive shear fracture, two kinds appear on surface: one is strike slip fault with reversed thrust, and another is thrust. Some hard inclusions rupture and some do not while hard contact serves between hard inclusions and sample; main fracture bypasses hard inclusion while soft contact serves. Finally, process of stress concentration, yield, softening until failure for hard inclusions have been analysed under a certain condition.
文摘The Lankao-Liaocheng Fractural Zone is a large-seade NNE-trending struetural zone in the North China Crustoblock. Dated from the Late Arehean-Early Proterozoie, it is stil1 active now. Its nature varied with time in its developing process. It has became a tensile ultralithospherie fraetural zone at present or in diwa residual-mobility period. Some cenozoic oil-gas-bearing basins are distributed along the fraetural zone which fomed an important oil-gas accumulating belt in the North China Ctustoblock.
文摘The solidification features,micro segregation,and fracture characteristics of cobalt based alloy on the substrate of 20CrMo steel by laser cladding were studied by using electron microscopy.Experimental results show that the fine columnar grains and cellular dendrite grains are obtained which are perpendicular to the coating/substrate interface;the primary arms are straight while the side branches are degenerated;the microstructure consists of primary face centered cubic (fcc) Co dendrites and a network of Cr enriched eutectic M23C6 (M=Cr,W,Fe) carbides;the micro segregation is severe for the rapid heating and cooling of laser cladding;the typical brittle intergranular fracture occurs in cobalt based laser cladding layer.
文摘Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.
文摘Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current evidence on diagnostic protocols and management strategies,highlighting optimal approaches and emerging trends.Initial care emphasizes soft tissue assessment,often guided by the Tscherne classification,and fracture classification systems.External fixation may be required in open injuries,while early open reduction and internal fixation within six days is linked to improved outcomes.Minimally invasive techniques for the lateral malleolus,including intramedullary nailing and locking plates,are effective,while medial malleolus fractures are commonly managed with screw fixation or tension-band wiring.Posterior malleolus fragments involving more than 25%of the articular surface usually warrant fixation.Alternatives to syndesmotic screws,such as cortical buttons or high-strength sutures,reduce the need for secondary procedures.Arthroscopic-assisted open reduction and internal fixation benefits younger,active patients by enabling concurrent management of intra-articular and ligamentous injuries.Postoperative care prioritizes early weight-bearing and validated functional scores.Despite advances,complications remain common,and further research is needed to refine surgical strategies and improve outcomes.
基金Supported by the National Natural Science Foundation for Outstanding Young Scholars(52425402)National Natural Science Foundation of China(52341401)International(Regional)Cooperation and Exchange Program of the National Natural Science Foundation of China(W2412078)。
文摘To investigate the fracture initiation and propagation behavior of fractures in tight sandstone under the supercritical CO_(2)(SCCO_(2))shock fracturing,laboratory fracturing experiments were conducted using a true-triaxial-like SCCO_(2)shock fracturing system.Computed tomography(CT)scanning and three-dimensional fracture reconstruction were employed to elucidate the effects of shock pressure,pore pressure,and in-situ stress on fracture characteristics.In addition,nuclear magnetic resonance(NMR)transverse relaxation time spectra were used to assess the internal damage induced by SCCO_(2)shock fracturing.The results indicate that,compared with conventional hydraulic fracturing and SCCO_(2)quasi-static fracturing,SCCO_(2)shock fracturing facilitates multidirectional fracture initiation and the formation of complex fracture networks.Increasing shock pressure more readily activates bedding-plane weaknesses,with main and subsidiary fractures interweaving into a dense fracture network.Under the same impulse intensity,elevated pore pressure reduces the effective normal stress and alters stress-wave scattering paths,thereby inducing more branch fractures and enhancing fracture complexity.An increase in differential in-situ stress promotes fracture propagation along the direction of the maximum principal stress,reduces branching,and simplifies fracture morphology.With increasing SCCO_(2)shock pressure,pore volume and connectivity generally increase:small-to-medium pores primarily respond through increased number and enhanced connectivity;when the shock pressure rises to 40-45 MPa,crack coalescence generates larger pores and fissures,which play a dominant role in improving flow pathways and effective storage space,ultimately forming a multiscale pore-fracture network.
基金Supported by the National Science and Technology Major Project of New-Type Oil and Gas Exploration and Development(2025ZD14041)National Science and Technology Major Project of China(2025ZD14053)+2 种基金Science and Technology Project of CNPC(2023ZZ21)Youth Science and Technology Project of CNPC(2024DQ03241)Postdoctoral Research Project of PetroChina Southwest Oil and Gas Field Company(20230304-13)。
文摘Taking the underground shale of the Silurian Longmaxi Formation in southern Sichuan Basin as the research object,stress-sensitive experiments on self-supporting fractures and micro-visualization experiments on gas-water flow were conducted under simulated reservoir conditions to study the mechanism of microscopic gas-water flow during the fracture closure process and discuss its engineering applications.The results show that as the effective stress gradually increased from 5 MPa to 60 MPa with an increment of 5 MPa per step,the self-supporting fracture closure exhibited a two-stage characteristic of being fast in the early stage and slow in the later stage,with the inflection point stress ranging from 32 MPa to 35 MPa,and the closure degree of 47%-76%.The effective stress increase gradually rose from 5 MPa per step to 20 MPa per step,and the early fracture closure accelerated,with the maximum closure degree increasing by 8.6%.As the fracture width decreased from 500μm to 50μm,the gas-phase shifted from continuous to discontinuous flow,and the proportion of the critical gas-phase flow to maintain the continuous gas-phase flow increased.In the early stage of fracture closure(fracture width greater than 300μm),the continuous gas-phase flow is controlled by the fracture width-the larger the fracture width,the smaller the proportion of the critical gas-phase flow to maintain the continuous gas-phase flow.In the late stage of fracture closure(fracture width less than 300μm),as the fractures continue to close,the dominant role of the surface roughness of the fractures becomes stronger,and the proportion of the critical gas-phase flow to maintain the continuous gas-phase flow exceeds 70%.A reasonable pressure control during stable production and pressure reduction in the early stage(the peak pressure drop at the wellhead is less than 32 MPa)to delay the self-supporting fracture closure is conducive to the stable and increased production of gas wells.
基金the PICTO project(RFCR-CT-2018-800711)funded by the European Research Fund for Coal and Steel(RFCS)and the Polish Ministry of Science and Higher Education(W93/FBWiS/2018).
文摘The research presented in this paper aimed to analyze the evolution of fractures in strata in relation to the progress of longwall mining.To achieve this objective,an introscopic probe equipped with a highresolution camera was developed,along with additional equipment that enables continuous recording of the internal surfaces of drainage boreholes exceeding 100 m in depth.The probe was utilized to test two methane drainage boreholes in the Z-3b longwall,which operates within the 501/3 coal seam of the Jankowice mine in Poland.Automatic image analysis methods were applied to evaluate the recorded images,based on a newly developed classificationsystem for fractures categorized by size and number.The results were compared with an analysis of changes in the methane capture rate from the drainage boreholes,which correlated with longwall mining progress.A strong correlation was observed between the number of fractures and the lithology of the strata layers.The largest number of fractures and their evolution were recorded in the coal layers,followed by the shale layers,while the sandstone layers exhibited the least number of fractures.Based on parallel measurements of the methane capture rate from the drainage boreholes during the progress of longwall mining,the extent of the strata's fracture zone was determined to range from 6 m to 36 m.Within the fracture zone,the strata are highly fractured,which leads to an increase in methane emissions through seepage and diffusion processes.
文摘BACKGROUND:Maxillofacial trauma represents a significant challenge in emergency medicine,requiring both diagnostic accuracy and prompt intervention while balancing immediate life-saving interventions with preservation of function and aesthetics.The complex anatomy of this region,with its proximity to critical structures,demands a thorough understanding of assessment and management principles.This narrative review aims to provide evidence-based guidelines for emergency physicians managing maxillofacial trauma,with particular emphasis on early recognition of critical injuries,airway management strategies,and special population considerations.METHODS:A narrative review was conducted via a comprehensive literature search of the PubMed and Scopus databases,which focused on maxillofacial trauma management in emergency settings.Articles were selected based on relevance to clinical practice,methodological quality,and current management guidelines.The review synthesized evidence from multiple study types,including original research,systematic reviews,and clinical practice guidelines,to provide practical guidance for emergency physicians.RESULTS:Initial assessment following Advanced Trauma Life Support(ATLS)principles is crucial,with airway management being a primary concern due to the risk of dynamic obstruction.Critical time-sensitive emergencies include orbital compartment syndrome,trapdoor fractures(in pediatric patients),and facial nerve injuries.Computed tomography(CT)imaging remains the gold standard for diagnosis.Special considerations are required for pediatric patients,who present unique anatomical challenges and injury patterns,and for elderly patients,who often have complex medical comorbidities and increased complication risks.Management strategies range from conservative treatment to urgent surgical intervention,with decisions based on the injury pattern and associated complications.CONCLUSION:Emergency physicians must maintain a structured yet fl exible approach to maxillofacial trauma,focusing on early recognition of critical injuries,appropriate airway management,and timely specialist consultation.Understanding injury patterns and their potential complications allows for eff ective risk stratifi cation and treatment planning,ultimately improving patient outcomes.
基金supported by the National Science and Technology Project of China(No.2024ZD1004300)。
文摘The effective channeling of fluid flow by fractures is a liability for enhanced oil recovery(EOR)methods like CO_(2) flooding or CO_(2) storage.Developing a distributed fracture model to understand the heterogeneity of the fracture network is essential in characterizing tight and low-permeability reservoirs.In the Ordos Basin,the Chang 8-1-2 layer of the Yanchang Formation is a typical tight and low permeability reservoir in the JH17 wellblock.The strong heterogeneity of distributed fractures,differing fracture scales and fracture types make it difficult to effectively characterize the fracture distribution within the Chang 8-1-2 layer.In this paper,multi-source and multi-attribute methods are used to integrate data into a neural network at different scales,and fuzzy logic control is used to judge the correlation of various attributes.The results suggest that attribute correlation between coherence and fracture indication is the best,followed by correlations with fault distance,north–south slope,and north–south curvature.Advantageous attributes from the target area are used to train the neural network,and the fracture density model and discrete fracture network(DFN)model are built at different scales.This method can be used to effectively predict the distribution characteristics of fractures in the study area.And any learning done by the neural network from this case study can be applied to fracture network modeling for reservoirs of the same type.
基金supported by the National Natural Science Foundation of China(52074313).
文摘The migration,accumulation,and high yield of hydrocarbons in tight sandstone reservoirs are closely tied to the natural fracture systems within the reservoirs.Large-scale fracture networks not only enhance reservoir seepage capacity but also influence effective productivity and subsequent fracturing reconstruction.Given the diverse mechanical behaviors,such as migration,penetration,or fracture arrest,traditional assumptions about fracture interaction criteria fail to address this complexity.To resolve these issues,a global cohesive element method is proposed to model random natural fractures.This approach verifies intersection models based on real-time stress conditions rather than pre-set criteria,enabling better characterization of interactions between hydraulic and natural fractures.Research has shown that the elastic modulus,horizontal stress difference,and fracturing fluid pumping rate significantly promote the expansion of hydraulic fractures.The use of low viscosity fracturing fluid can observe a decrease in the width of fractures near the wellbore,which may cause fractures to deflect when interacting with natural fractures.However,simulations under these conditions did not form a“complex network of fractures”.It is worth noting that when the local stress difference is zero,the result is close to the formation of this network.Excessive spacing will reduce the interaction between fractures,resulting in a decrease in the total length of fractures.By comprehensively analyzing these factors,an optimal combination can be identified,increasing the likelihood of achieving a“complex fracture network”.This paper thoroughly investigates hydraulic fracture propagation in naturally fractured reservoirs under various conditions,offering insights for developing efficient fracturing methods.
基金funding from the National Natural Science Foundation of China(No.U24B6001)the CNPC Innovation Fund(No.2021DQ02-0502).
文摘Re-fracturing horizontal wells is a critical strategy for enhancing recovery from tight oil reservoirs,but its success depends on the evaluation of candidate wells and locations.This process is complicated by production-induced alterations in reservoir pressure and geomechanical responses.This study introduces a workflow to evaluate re-fracturing potential by integrating coupled fluid flow and geomechanical modeling for the production of initial hydraulic fractures.We developed a numerical model that simulates the poroelastic response of a tight oil reservoir to depletion from an initial set of hydraulic fractures.To quantify the re-fracturing potential along the horizontal wellbore,a novel composite re-fracturing potential index is proposed where fracture shape,stress,and pressure are considered.This index considers four key physical factors:current reservoir pressure,fracture initiation ease,fracture geometry favorability,and fracture propagation efficiency considering tortuosity.Numerical simulations were conducted for scenarios with both uniform and non-uniform initial hydraulic fractures.The results consistently demonstrate that the optimal locations for re-fracturing are the midpoints between existing fractures,where a favorable balance of high reservoir pressure and altered stress conditions exists.The analysis reveals that the overall re-fracturing potential tends to increase with production time,suggesting that a period of depletion can enhance the geomechanical conditions for subsequent stimulation.Furthermore,a sensitivity analysis on the index weighting factors shows that the optimum re-fracturing strategy is highly dependent on the primary field objective,whether it is maximizing resource contact,ensuring geomechanical feasibility,or avoiding operational complexity.The study concludes that heterogeneity in the initial fracture network creates complex and asymmetric potential profiles,which implies the necessity of case-specific and integrated analysis over simplified assumptions.The proposed methodology provides a framework for optimizing re-fracturing designs in tight oil reservoirs.
基金support provided by the National Natural Science Foundation of China(No.52274077)the Natural Science Foundation of Henan(No.242300421072)+2 种基金the Youth Elite Teachers Cultivation Program for Higher Education Institutions in Henan Province(No.2024GGJS036)the Funds for Distinguished Young Scholars of Henan Polytechnic University(No.J2023-3)the Young Core Teacher Funding Scheme of Henan Polytechnic University(No.2023XQG-09).
文摘This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.
基金Supported by the Ministry of Education U40 Program(ZYGXONJSKYCXNLZCXM-E19)National Natural Science Foundation of China(52574078)。
文摘The forward model of optical fiber strain induced by fractures,together with the associated model resolution matrix,is used to demonstrate the interpretability of fracture parameters once the fracture intersects the fiber.A regularized inversion framework for fracture parameters is established to evaluate the influence of measured data quality on the accuracy of iterative regularized inversion.An interpretation approach for both fracture width and height is proposed,and the synthetic forward data with measurement error and field examples are employed to validate the accuracy of the simultaneous inversion of fracture width and height.The results indicate that,after the fracture contacts the fiber,the strain response is strongly sensitive only to the fracture parameters at the intersection location,whereas the interpretability of parameters at other locations remains limited.The iterative regularized inversion method effectively suppresses the impact of measurement error and exhibits high computational efficiency,showing clear advantages for inversion applications.When incorporating the first-order regularization with a Neumann boundary constraint on the tip width,the inverted fracture-width distribution becomes highly sensitive to fracture height;thus,combined with a bisection strategy,simultaneous inversion of fracture width and height can be achieved.Examination using the model resolution matrix,noisy synthetic data,and field data confirms that the iterative regularized inversion model for fracture width and height provides high interpretive accuracy and can be applied to the calculation and analysis of fracture width,fracture height,net pressure and other parameters.
文摘Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.
基金Supported by the National Natural Science Foundation of China(U21B2071,U23B20156)。
文摘A three-dimensional multiphase particle-in-cell(MP-PIC)method was adopted to establish a liquid-solid two-phase flow model accounting for complex fracture networks.The model was validated using physical experimental data.On this basis,the main factors influencing proppant transport in fracture network were analyzed.The study shows that proppant transport in fracture network can be divided into three stages:initial filling,dominant channel formation and fracture network extension.These correspond to three transport patterns:patch-like accumulation near the wellbore,preferential placement along main fractures,and improved the coverage of planar placement as fluid flows into branch fractures.Higher proppant density,lower fracturing fluid viscosity,lower injection rate,and larger proppant grain size result in shorter proppant transport distance and smaller planar placement coefficient.The use of low-density,small-diameter proppant combined with high-viscosity fracturing fluid and appropriately increased injection rate can effectively enlarge the stimulated volume.A smaller angle between the main fracture and branch fractures leads to longer proppant banks,broader coverage,more uniform distribution,and better stimulation performance in branch fractures.In contrast,a larger angle increases the likelihood of proppant accumulation near the branch fracture entrance and reduces the planar placement coefficient.
基金the China National Petroleum Corporation’s Forward-Looking Fundamental Technology Breakthrough Project(2021DJ2305).
文摘Self-suspended proppants,which enable clear-water fracturing,represent a promising new class of materials for reservoir stimulation.Given the economic limitations associated with their exclusive use,this study investigates proppant transport behavior in hybrid systems combining self-suspended proppants with conventional 40/70 mesh quartz sand at various mixing ratios.A dedicated experimental apparatus was developed to replicate field-relevant complex fracture networks,consisting of a main fracture and two branching fractures with different deflection angles.Using this system,sand bank formation and proppant distribution were examined for both conventional quartz sand fracturing and fracturing augmented with self-suspended proppants.The effects of slurry discharge volume,proppant mixing ratio,sand ratio,and injection location of the self-suspended proppant on transport and placement behavior were systematically analyzed.According to the results,the incorporation of self-suspended proppants markedly enhances the proppant-carrying capacity of the slurry and substantially modifies sand bank morphology.Increasing the discharge volume raises the inlet slope angle and promotes greater proppant penetration into branch fractures.The proportion of self-suspended proppant governs slurry viscoelasticity and,consequently,proppant settling behavior.As the fraction of self-suspended proppant decreases,the equilibrium height of the sand bank increases,while the proppant mass fraction within branch fractures exhibits a non-monotonic response,initially decreasing and then increasing.Variations in sand ratio alter both overall proppant concentration and the self-suspended proppant-to-water ratio,thereby modulating slurry rheology and influencing proppant placement.In addition,changes in injection location affect near-wellbore vortex structures,leading to distinct sand bank morphologies.
基金supported by the National Natural Science Foundation of China(Grant No.52522405)Key R&D Project of Sichuan Province of China(Regional Innovation Coop-eration)(Grant No.2025YFHZ0314).
文摘After coal seam mining,the overlying rock strata above the goaf are subjected to long-term stress and eventually undergo failure.Under mining-induced disturbances,the strata develop fractures at various angles,which significantly influence failure modes and the morphology of gas flow channels.This study employed multistage loading experiments,numerical simulations,three-dimensional reconstruction,and image recognition to investigate the fragmentation process of rocks with different initial fracture angles under multistage loading.The results show that variations in the initial fracture angle affect the transmission of contact forces among rock particles.As the angle increases,the transmission pattern shifts from a uniform distribution to one extending along the direction of the fracture.Rocks with small initial fracture angles tend to experience tensile-dominated failure,with most of the material subjected to longitudinal loading,resulting in reduced strength.Fractures propagate from the central region of the initial fracture,producing a complex internal fracture network.The proportion of fracture channels varies considerably across regions,creating multiple zones of velocity variation in the gas flow.In contrast,rocks with large initial fracture angles are more susceptible to shear failure,with the primary load-bearing zones aligned along the inclined fracture direction.As a result,the influence on surrounding regions is limited,improving the rock's load-bearing capacity under multistage loading.In these cases,the distribution and proportion of fracture channels become more uniform,promoting more stable gas flow within the channels.Overall,these findings provide theoretical insights into how initial fracture angles govern rock failure patterns and gas flow characteristics.
基金supports from the National Natural Science Foundation of China(Grant Nos.52179095,52378323,and 42407216)are gratefully acknowledged.
文摘The increase in CO_(2)injectivity and shifting of CO_(2)-absorbing layers in multilayered geological CO_(2)sequestration(GCS)reservoirs in Ordos,China indicate significantpermeability variations in certain layers.To capture these system changes,a numerical model incorporating all 21 aquifers and internal aquitards was developed.The monitored pressure was well matched through multiphase and thermalhydraulic-mechanical(THM)coupling numerical simulations by introducing permeability variations.The results revealed that the permeability in the second layer increased on approximately day 13 due to the abrupt pressure buildup and temperature decrease.Even such a low rate of CO_(2)(2.8 kg/s)injected into the low permeability system initiated some fractures and the permeability in the second layer around the wellbore increased by 722 times.The second critical system change occurred on approximately day 386.As demonstrated in the numerical simulation,the substantial injection of cold CO_(2)induced strong thermal stress,leading to rock contraction and the initiation of several cracks.The permeability of the firstlayer around the wellbore unexpectedly increased by 4 orders of magnitude.Since no additional pressure could drive the CO_(2)into the remaining 17 layers,the total storage capability of the multilayered system was reduced.A whole picture of the system variation is fully presented and the underlying mechanisms are analyzed.It is believed that the phenomenon of thermal-hydraulic fracturing observed in this fieldand the simulation procedures will benefitother fluidinjection and production works in various geotechnical settings.
基金The Vice Chancellor of Research and Technology at Urmia University。
文摘Background:Biological osteosynthesis preserves blood supply and promotes rapid healing by aligning fracture fragments without direct surgical exposure.Pedicle screws are primarily designed for internal fixation in spinal procedures.A key objec-tive of many orthopedic studies is to assess the biocompatibility of implants with bone and adjacent soft tissue.This study aims to evaluate the biocompatibility and effects of the Pedicle screw-Rod configuration as a novel external fixation method in canine tibial osteotomy.Methods:With ethics approval,eight healthy,intact male dogs,aged 10-12 months and weighing between 20 and 22 kg,underwent a minimally invasive medial tibial approach for surgical fixation of tibial osteotomy using a Pedicle screw-Rod configu-ration.Postoperative evaluations included ultrasound assessments at the osteotomy site and histological evaluations at the bone-screw interface.Results:B-mode ultrasound evaluation indicated healing progress at all osteotomy sites.The color Doppler examination revealed an initial increase in signals in the sur-rounding soft tissue during the first 4 weeks post-operation,followed by a decrease in signals within the adjacent soft tissue between the 5th and 8th weeks.During this latter period,the signals were primarily concentrated on the bone surface and the callus.The bone-screw interface at various screw sites exhibited similar histological changes,indicating effective integration of the newly formed woven bone into the screw threads.Conclusions:Fixation of non-articular tibial osteotomy with Pedicle screw-Rod con-figuration resulted in secondary bone healing,characterized by abundant callus for-mation and neovascularization.This implant demonstrated favorable biocompatibility with bone and surrounding soft tissue,without significant complications.
