Existing reverse-engineering methods struggle to directly generate editable,parametric CAD models from scanned data.To address this limitation,this paper proposes a reverse-modeling approach that reconstructs parametr...Existing reverse-engineering methods struggle to directly generate editable,parametric CAD models from scanned data.To address this limitation,this paper proposes a reverse-modeling approach that reconstructs parametric CAD models from multi-view RGB-D point clouds.Multi-frame point-cloud registration and fusion are first employed to obtain a complete 3-D point cloud of the target object.A region-growing algorithm that jointly exploits color and geometric information segments the cloud,while RANSAC robustly detects and fits basic geometric primitives.These primitives serve as nodes in a graph whose edge features are inferred by a graph neural network to capture spatial constraints.From the detected primitives and their constraints,a high-accuracy,fully editable parametric CAD model is finally exported.Experiments show an average parameter error of 0.3 mm for key dimensions and an overall geometric reconstruction accuracy of 0.35 mm.The work offers an effective technical route toward automated,intelligent 3-D reverse modeling.展开更多
Erosion in slurry pumps presents a persistent challenge in industrial applications.This study examines the erosion of the static components of a 150ZJ-C42 centrifugal slurry pump,currently in operation at a beneficiat...Erosion in slurry pumps presents a persistent challenge in industrial applications.This study examines the erosion of the static components of a 150ZJ-C42 centrifugal slurry pump,currently in operation at a beneficiation plant,under varying particle conditions.Utilizing high-precision three-dimensional reverse engineering,the pump’s flow passage geometry was reconstructed to facilitate detailed erosion analysis.Focusing on the front and rear baffles of the pump chamber,as well as the volute,erosion patterns were analyzed for different particle volume concentrations and sizes.The results reveal that the highest erosion damage consistently occurs near the volute tongue,with wear being most severe in regions adjacent to the partition plate near the rear cover.Erosion damage intensity in this area correlates positively with particle diameter.Notably,the average erosion rate in the volute surpasses that of the front and rear chamber liners,reaching a value as high as 6.03×10^(-7)kg·m^(-2)·s^(-1)at a particle concentration of 9%and diameter of 0.1 mm,adversely impacting pump stability.For the pump chamber baffles,increased erosion is observed at a particle diameter of 0.05 mm under constant volume concentration conditions,while higher particle concentrations exacerbate localized erosion.展开更多
Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigat...Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigate the dynamics of liver cirrhosis progression as well as to explain the implications of variations in alcohol consumption on chronic hepatitis B patients,respectively.The intricate interactions between liver cirrhosis,recovery,and treatment dynamics are captured by the model.This study aims to show that alcohol consumption by Hepatitis B-infected individuals accelerates liver cirrhosis progression while treatment of acutely infected individuals reduces it.We proved that a unique solution of the proposed model exists,which is positive and bounded.Using the next-generation matrix approach,two basic reproductive numbers R_(A_(0))and R_(A_(max))are calculated to identify future recurrence.The equilibrium points are calculated,and both equilibria are proved locally and globally asymptotically stable when R_(0)is below and above one,respectively.It is shown that bifurcation exists at R_(0)=1 and a detailed proof for forward bifurcation is given.Furthermore,we performed the sensitivity analysis of the model parameters on R_(0).For the confirmation of analytical work,we performed numerical simulations,and the results indicate that the treatment and the inhibitory effects reduce the risk of developing liver cirrhosis in individuals,while heavy alcohol consumption accelerates markedly the liver cirrhosis progression in patients with chronic hepatitis B.展开更多
Fluvial systems play a crucial role in coastal and riverine ecosystems, making it essential to understand their responses to sea level changes for preserving biodiversity and managing natural resources. The evolution ...Fluvial systems play a crucial role in coastal and riverine ecosystems, making it essential to understand their responses to sea level changes for preserving biodiversity and managing natural resources. The evolution of the modern Indus River Delta offers a rare opportunity to study the interplay between sea level fluctuations, tectonism, sediment supply, and the corresponding fluvial responses. This study employs the ‘SedSim' stratigraphic forward model to simulate the delta's evolution from 200 kyr to the next5 kyr, drawing on data from field observations, Landsat imagery, digital elevation models, and previous studies. The model consists of 205 layers, each representing a 1-kyr time step, covering the last two glacial-interglacial cycles. Between 200 kyr and 130 kyr, during a lowstand period, sedimentation on the delta plain continued due to partial flow from the Indus River. During the last interglacial(130–60 kyr), rising sea levels led to peak sediment deposition, characteristic of a highstand phase. From 60 kyr to 18 kyr, sea levels dropped to their lowest during the Last Glacial Maximum(LGM), resulting in extensive erosion and minimal deposition on the delta plain. From 18 kyr to the present, rapidly rising sea levels, coupled with intensified monsoon activity, increased sedimentation rates and triggered avulsion and aggradation processes. The model accurately predicted depositional thickness across the delta plain, indicating a maximum of ca. 200 m at the shoreline platform, ca. 175 m in the northeastern delta, and ca. 100 m in the central delta. The study underscores the delta's vulnerability to future sea level rise, which–at a projected rate of 1 m/kyr–could significantly influence the densely populated, low-lying delta plain. These findings offer valuable insights into the geomorphic evolution of the Indus Delta and emphasize the socioeconomic implications of sea level change, underscoring the importance of proactive management and adaptation strategies.展开更多
Aiming at the problem of structure design in reverse-design of mechanism,a structure mapping method based on reverse solving of locus and motion(RSLM)is presented.The mechanism scheme meeting the requirements of geome...Aiming at the problem of structure design in reverse-design of mechanism,a structure mapping method based on reverse solving of locus and motion(RSLM)is presented.The mechanism scheme meeting the requirements of geometric and structural features is obtained through RSLM.The element instance subsets related to component are established based on the element type mapping,pair structure type mapping and design knowledge mapping between components and elements layer by layer.The assembly position mapping of elements is established based on the topological structure information of mechanism scheme,and the product modeling of structure mapping is realized.The algorithm program and prototype system of product structure mapping based on RSLM are developed.Application samples show that the method implements the integration of scheme design,assembly design and structure design,and modeling for product structure mapping based on RSLM.The feasibility of assembly is analyzed in scheme design that contributes to reducing the design error,and raising the design efficiency and quality.展开更多
Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect be...Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect between water flux and salt rejection poses huge challenges to further improvement in TFC RO membrane performance.Numerous research works have been dedicated to optimizing membrane fabrication and modification for addressing this issue.In the meantime,several reviews summarized these approaches.However,the existing reviews seldom analyzed these methods from a theoretical perspective and thus failed to offer effective optimization directions for the RO process from the root cause.In this review,we first propose a mass transfer model to facilitate a better understanding of the entire process of how water and solute permeate through RO membranes in detail,namely the migration process outside the membrane,the dissolution process on the membrane surface,and the diffusion process within the membrane.Thereafter,the water and salt mass transfer behaviors obtained from model deduction are comprehensively analyzed to provide potential guidelines for alleviating the trade-off effect between water flux and salt rejection in the RO process.Finally,inspired by the theoretical analysis and the accurate identification of existing bottlenecks,several promising strategies for both regulating RO membranes and optimizing operational conditions are proposed to further exploit the potential of RO membrane performance.This review is expected to guide the development of high-performance RO membranes from a mass transfer theory standpoint.展开更多
A novel method to extract conic blending feature in reverse engineering is presented. Different from the methods to recover constant and variable radius blends from unorganized points, it contains not only novel segme...A novel method to extract conic blending feature in reverse engineering is presented. Different from the methods to recover constant and variable radius blends from unorganized points, it contains not only novel segmentation and feature recognition techniques, but also bias corrected technique to capture more reliable distribution of feature parameters along the spine curve. The segmentation depending on point classification separates the points in the conic blend region from the input point cloud. The available feature parameters of the cross-sectional curves are extracted with the processes of slicing point clouds with planes, conic curve fitting, and parameters estimation and compensation, The extracted parameters and its distribution laws are refined according to statistic theory such as regression analysis and hypothesis test. The proposed method can accurately capture the original design intentions and conveniently guide the reverse modeling process. Application examples are presented to verify the high precision and stability of the proposed method.展开更多
Based on Maxwell’s constraint counting theory, rigidity percolation in GexSe1-x glasses occurs when the mean coordination number reaches the value of 2.4. This corresponds to Ge0.20Se0.80 glass. At this composition, ...Based on Maxwell’s constraint counting theory, rigidity percolation in GexSe1-x glasses occurs when the mean coordination number reaches the value of 2.4. This corresponds to Ge0.20Se0.80 glass. At this composition, the number of constraints experienced by an atom equals the number of degrees of freedom in three dimensions. Hence, at this composition, the network changes from a floppy phase to a rigid phase, and rigidity starts to percolate. In this work, we use reverse Monte Carlo (RMC) modeling to model the structure of Ge0.20Se0.80 glass by simulating its experimental total atomic pair distribution function (PDF) obtained via high energy synchrotron radiation. A three-dimensional configuration of 2836 atoms was obtained, from which we extracted the partial atomic pair distribution functions associated with Ge-Ge, Ge-Se and Se-Se real space correlations that are hard to extract experimentally from total scattering methods. Bond angle distributions, coordination numbers, mean coordination numbers and the number of floppy modes were also extracted and discussed. More structural insights about network topology at this composition were illustrated. The results indicate that in Ge0.20Se0.80 glass, Ge atoms break up and cross-link the Se chain structure, and form structural units that are four-fold coordinated (the GeSe4 tetrahedra). These tetrahedra form the basic building block and are connected via shared Se atoms or short Se chains. The extent of the intermediate ranged oscillations in real space (as extracted from the width of the first sharp diffraction peak) was found to be around 19.6 ?. The bonding schemes in this glass are consistent with the so-called “8-N” rule and can be interpreted in terms of a chemically ordered network model.展开更多
The mapping method is a forward-modeling method that transforms the irregular surface to horizontal by mapping the rectangular grid as curved; moreover, the wave field calculations move from the physical domain to the...The mapping method is a forward-modeling method that transforms the irregular surface to horizontal by mapping the rectangular grid as curved; moreover, the wave field calculations move from the physical domain to the calculation domain. The mapping method deals with the irregular surface and the low-velocity layer underneath it using a fine grid. For the deeper high-velocity layers, the use of a fine grid causes local oversampling. In addition, when the irregular surface is transformed to horizontal, the flattened interface below the surface is transformed to curved, which produces inaccurate modeling results because of the presence of ladder-like burrs in the simulated seismic wave. Thus, we propose the mapping method based on the dual-variable finite-difference staggered grid. The proposed method uses different size grid spacings in different regions and locally variable time steps to match the size variability of grid spacings. Numerical examples suggest that the proposed method requires less memory storage capacity and improves the computational efficiency compared with forward modeling methods based on the conventional grid.展开更多
We investigated the effect of microscopic distribution modes of hydrates in porous sediments, and the saturation of hydrates and free gas on the elastic properties of saturated sediments. We simulated the propagation ...We investigated the effect of microscopic distribution modes of hydrates in porous sediments, and the saturation of hydrates and free gas on the elastic properties of saturated sediments. We simulated the propagation of seismic waves in gas hydrate-bearing sediments beneath the seafloor, and obtained the common receiver gathers of compressional waves（P-waves） and shear waves（S-waves）. The numerical results suggest that the interface between sediments containing gas hydrates and free gas produces a large-amplitude bottomsimulating reflector. The analysis of multicomponent common receiver data suggests that ocean-bottom seismometers receive the converted waves of upgoing P- and S-waves, which increases the complexity of the wavefield record.展开更多
Since the ocean bottom is a sedimentary environment wherein stratification is well developed, the use of an anisotropic model is best for studying its geology. Beginning with Maxwell＇s equations for an anisotropic mo...Since the ocean bottom is a sedimentary environment wherein stratification is well developed, the use of an anisotropic model is best for studying its geology. Beginning with Maxwell＇s equations for an anisotropic model, we introduce scalar potentials based on the divergence-free characteristic of the electric and magnetic （EM） fields. We then continue the EM fields down into the deep earth and upward into the seawater and couple them at the ocean bottom to the transmitting source. By studying both the DC apparent resistivity curves and their polar plots, we can resolve the anisotropy of the ocean bottom. Forward modeling of a high-resistivity thin layer in an anisotropic half-space demonstrates that the marine DC resistivity method in shallow water is very sensitive to the resistive reservoir but is not influenced by airwaves. As such, it is very suitable for oil and gas exploration in shallowwater areas but, to date, most modeling algorithms for studying marine DC resistivity are based on isotropic models. In this paper, we investigate one-dimensional anisotropic forward modeling for marine DC resistivity method, prove the algorithm to have high accuracy, and thus provide a theoretical basis for 2D and 3D forward modeling.展开更多
AVO forward modeling is based on two-phase medium theory and is considered an effective method for describing reservoir rocks and fluids. However, the method depends on the input matrix mineral bulk modulus and the ra...AVO forward modeling is based on two-phase medium theory and is considered an effective method for describing reservoir rocks and fluids. However, the method depends on the input matrix mineral bulk modulus and the rationality of the two-phase medium model. We used the matrix mineral bulk modulus inversion method and multiple constraints to obtain a two-phase medium model with physical meaning. The proposed method guarantees the reliability of the obtained AVO characteristicsin two-phase media. By the comparative analysis of different lithology of the core sample, the advantages and accuracy of the inversion method can be illustrated. Also, the inversion method can be applied in LH area, and the AVO characteristics can be obtained when the porosity, fluid saturation, and other important lithology parameters are changed. In particular, the reflection coefficient amplitude difference between the fast P wave and S wave as a function of porosity at the same incidence angle, and the difference in the incidence angle threshold can be used to decipher porosity.展开更多
A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the paramet...A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the parameters, the back- propagation algorithm is applied to train the proposed neural networks. The proposed model is verified by the typical odd- order-only memory polynomial model in simulation, and the performance is compared with different numbers of taped delay lines（TDLs） and perceptrons of the hidden layer. For validating the TDFFNN model by experiments, a digital test bench is set up to collect input and output data of power amplifiers at a 60 × 10^6 sample/s sampling rate. The 3.75 MHz 16-QAM signal generated in the vector signal generator（VSG） is chosen as the input signal, when measuring the dynamic AM/AM and AM/PM characteristics of power amplifiers. By comparisons and analyses, the presented model provides a good performance in convergence, accuracy and efficiency, which is approved by simulation results and experimental results in the time domain and frequency domain.展开更多
We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have establi...We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have established several 1-D resistivity models which have different gas hydrate concentrations. Meanwhile, we analyzed the electromagnetic response of marine gas hydrates in the frequency domain based on these models. We also studied the relationship between electrical field magnitude or phase and parameters such as receiver-transmitter distance and frequency. Our numerical modeling results provide us with a quantitative reference for exploration and resource evaluation of marine gas hydrates.展开更多
In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough. The reverse engineering technology was adopted to obtain the surface geometrical informatio...In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough. The reverse engineering technology was adopted to obtain the surface geometrical information of the head. Several three-dimensional （3D） point clouds of the head were captured first using a non-touch laser scanner, and an integrated point cloud was generated by aligning these point clouds using UG/Imageware. Then, the digital surface model of the head was rebuilt by means of CATIA. The characteristic curves of the surface model were analyzed. The results show that the average error between the rebuilt surface and the point cloud is -0.431 ram. The max curvature of the ridge on the neb of the head is 0.187 mm^-1, and the max and rain Gauss curvatures on the surface are 0.008 mm^-2 and -0.002 mm^-2. These geometrical information are the essential parameters for biomimetics study of the ridger.展开更多
Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transfo...Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transformation to curvilinear coordinates using body-fitted grids have been proposed, e.g., stand staggered grid(SSG) with interpolation, nonstaggered grid, rotated staggered grid(RSG), and fully staggered. The FD based on the RSG is somewhat superior to others because it satisfies the spatial distribution of the wave equation without additional memory and computational requirements; furthermore, it is simpler to implement. We use the RSG FD method to transform the firstorder stress–velocity equation in the curvilinear coordinates system and introduce the highprecision adaptive, unilateral mimetic finite-difference(UMFD) method to process the freeboundary conditions of an irregular surface. The numerical results suggest that the precision of the solution is higher than that of the vacuum formalism. When the minimum wavelength is low, UMFD avoids the surface wave dispersion. We compare FD methods based on RSG, SEM, and nonstaggered grid and infer that all simulation results are consistent but the computational efficiency of the RSG FD method is higher than the rest.展开更多
This research focused on the feasibility of applying the forward and reverse combustion approach to the in situ gasification of lignite with the production of hydrogen-rich syngas(H_(2)and CO).The so-called forward co...This research focused on the feasibility of applying the forward and reverse combustion approach to the in situ gasification of lignite with the production of hydrogen-rich syngas(H_(2)and CO).The so-called forward combustion gasification(FCG)and reverse combustion gasification(RCG)approach in which oxygen and steam are simultaneously fed to the simulated system of underground coal gasification(UCG)was studied.A simulated system of UCG was designed and established.The underground conditions of the coal seam and strata were simulated in the system.The combustion gasification of lignite has been carried out experimentally for almost 6.5 days.The average effective content(H_(2)+CO)of syngas during the FCG phase was 62.31%and the maximum content was 70.92%.For the RCG phase the corresponding figures are 61.33%and 67.91%.Thus,the feasibility of using RCG way for UCG has been demonstrated.The temperature profiles have been provided by using of 85 thermocouples during the model experiment,which portrayed the several nephograms of thermal data in the gasifier were of significance for the prospective gasification processes.展开更多
The workload of the 3D magnetotelluric forward modeling algorithm is so large that the traditional serial algorithm costs an extremely large compute time. However, the 3D forward modeling algorithm can process the dat...The workload of the 3D magnetotelluric forward modeling algorithm is so large that the traditional serial algorithm costs an extremely large compute time. However, the 3D forward modeling algorithm can process the data in the frequency domain, which is very suitable for parallel computation. With the advantage of MPI and based on an analysis of the flow of the 3D magnetotelluric serial forward algorithm, we suggest the idea of parallel computation and apply it. Three theoretical models are tested and the execution efficiency is compared in different situations. The results indicate that the parallel 3D forward modeling computation is correct and the efficiency is greatly improved. This method is suitable for large size geophysical computations.展开更多
文摘Existing reverse-engineering methods struggle to directly generate editable,parametric CAD models from scanned data.To address this limitation,this paper proposes a reverse-modeling approach that reconstructs parametric CAD models from multi-view RGB-D point clouds.Multi-frame point-cloud registration and fusion are first employed to obtain a complete 3-D point cloud of the target object.A region-growing algorithm that jointly exploits color and geometric information segments the cloud,while RANSAC robustly detects and fits basic geometric primitives.These primitives serve as nodes in a graph whose edge features are inferred by a graph neural network to capture spatial constraints.From the detected primitives and their constraints,a high-accuracy,fully editable parametric CAD model is finally exported.Experiments show an average parameter error of 0.3 mm for key dimensions and an overall geometric reconstruction accuracy of 0.35 mm.The work offers an effective technical route toward automated,intelligent 3-D reverse modeling.
基金The authors gratefully acknowledge the filnancial support of the National Natural Science Foundation of China(Grant No.52369018)the Major Training Program of University Research and Innovation Platform of Gansu Provincial Department of Education(No.2024CXPT-09)+1 种基金the Administration of Central Funds Guiding the Local Science and Technology Development,China(Grant No.23ZYQA0320)the Double First-Class Key Program of Gansu Provincial Department of Education,Grant No.GCJ2022-38.
文摘Erosion in slurry pumps presents a persistent challenge in industrial applications.This study examines the erosion of the static components of a 150ZJ-C42 centrifugal slurry pump,currently in operation at a beneficiation plant,under varying particle conditions.Utilizing high-precision three-dimensional reverse engineering,the pump’s flow passage geometry was reconstructed to facilitate detailed erosion analysis.Focusing on the front and rear baffles of the pump chamber,as well as the volute,erosion patterns were analyzed for different particle volume concentrations and sizes.The results reveal that the highest erosion damage consistently occurs near the volute tongue,with wear being most severe in regions adjacent to the partition plate near the rear cover.Erosion damage intensity in this area correlates positively with particle diameter.Notably,the average erosion rate in the volute surpasses that of the front and rear chamber liners,reaching a value as high as 6.03×10^(-7)kg·m^(-2)·s^(-1)at a particle concentration of 9%and diameter of 0.1 mm,adversely impacting pump stability.For the pump chamber baffles,increased erosion is observed at a particle diameter of 0.05 mm under constant volume concentration conditions,while higher particle concentrations exacerbate localized erosion.
文摘Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigate the dynamics of liver cirrhosis progression as well as to explain the implications of variations in alcohol consumption on chronic hepatitis B patients,respectively.The intricate interactions between liver cirrhosis,recovery,and treatment dynamics are captured by the model.This study aims to show that alcohol consumption by Hepatitis B-infected individuals accelerates liver cirrhosis progression while treatment of acutely infected individuals reduces it.We proved that a unique solution of the proposed model exists,which is positive and bounded.Using the next-generation matrix approach,two basic reproductive numbers R_(A_(0))and R_(A_(max))are calculated to identify future recurrence.The equilibrium points are calculated,and both equilibria are proved locally and globally asymptotically stable when R_(0)is below and above one,respectively.It is shown that bifurcation exists at R_(0)=1 and a detailed proof for forward bifurcation is given.Furthermore,we performed the sensitivity analysis of the model parameters on R_(0).For the confirmation of analytical work,we performed numerical simulations,and the results indicate that the treatment and the inhibitory effects reduce the risk of developing liver cirrhosis in individuals,while heavy alcohol consumption accelerates markedly the liver cirrhosis progression in patients with chronic hepatitis B.
基金the Science and Technology Innovation Project of the Laoshan Laboratory (No. LSKJ202203402)the Major Research Project on the Tethys Geodynamic System from the National Science Foundation of China (No. 92055204)。
文摘Fluvial systems play a crucial role in coastal and riverine ecosystems, making it essential to understand their responses to sea level changes for preserving biodiversity and managing natural resources. The evolution of the modern Indus River Delta offers a rare opportunity to study the interplay between sea level fluctuations, tectonism, sediment supply, and the corresponding fluvial responses. This study employs the ‘SedSim' stratigraphic forward model to simulate the delta's evolution from 200 kyr to the next5 kyr, drawing on data from field observations, Landsat imagery, digital elevation models, and previous studies. The model consists of 205 layers, each representing a 1-kyr time step, covering the last two glacial-interglacial cycles. Between 200 kyr and 130 kyr, during a lowstand period, sedimentation on the delta plain continued due to partial flow from the Indus River. During the last interglacial(130–60 kyr), rising sea levels led to peak sediment deposition, characteristic of a highstand phase. From 60 kyr to 18 kyr, sea levels dropped to their lowest during the Last Glacial Maximum(LGM), resulting in extensive erosion and minimal deposition on the delta plain. From 18 kyr to the present, rapidly rising sea levels, coupled with intensified monsoon activity, increased sedimentation rates and triggered avulsion and aggradation processes. The model accurately predicted depositional thickness across the delta plain, indicating a maximum of ca. 200 m at the shoreline platform, ca. 175 m in the northeastern delta, and ca. 100 m in the central delta. The study underscores the delta's vulnerability to future sea level rise, which–at a projected rate of 1 m/kyr–could significantly influence the densely populated, low-lying delta plain. These findings offer valuable insights into the geomorphic evolution of the Indus Delta and emphasize the socioeconomic implications of sea level change, underscoring the importance of proactive management and adaptation strategies.
基金supported by National Hi-tech Research Development Program of China(863 Program,No.2006AA04ZlI4)Research Fund for the Doctoral Program of Higher Education,China(No.20040335060)Zhejiang Provincial Scientific Personnel Educational Foundation,China(No.R603240).
文摘Aiming at the problem of structure design in reverse-design of mechanism,a structure mapping method based on reverse solving of locus and motion(RSLM)is presented.The mechanism scheme meeting the requirements of geometric and structural features is obtained through RSLM.The element instance subsets related to component are established based on the element type mapping,pair structure type mapping and design knowledge mapping between components and elements layer by layer.The assembly position mapping of elements is established based on the topological structure information of mechanism scheme,and the product modeling of structure mapping is realized.The algorithm program and prototype system of product structure mapping based on RSLM are developed.Application samples show that the method implements the integration of scheme design,assembly design and structure design,and modeling for product structure mapping based on RSLM.The feasibility of assembly is analyzed in scheme design that contributes to reducing the design error,and raising the design efficiency and quality.
基金supported by the Natural Science Foundation of Sichuan Province(No.2022NSFSC1042)National Natural Science Foundation of China(No.52200051)+1 种基金Outstanding Youth Fund of Heilongjiang Natural Science Foundation(No.YQ2023E021)Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.HC202236).
文摘Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect between water flux and salt rejection poses huge challenges to further improvement in TFC RO membrane performance.Numerous research works have been dedicated to optimizing membrane fabrication and modification for addressing this issue.In the meantime,several reviews summarized these approaches.However,the existing reviews seldom analyzed these methods from a theoretical perspective and thus failed to offer effective optimization directions for the RO process from the root cause.In this review,we first propose a mass transfer model to facilitate a better understanding of the entire process of how water and solute permeate through RO membranes in detail,namely the migration process outside the membrane,the dissolution process on the membrane surface,and the diffusion process within the membrane.Thereafter,the water and salt mass transfer behaviors obtained from model deduction are comprehensively analyzed to provide potential guidelines for alleviating the trade-off effect between water flux and salt rejection in the RO process.Finally,inspired by the theoretical analysis and the accurate identification of existing bottlenecks,several promising strategies for both regulating RO membranes and optimizing operational conditions are proposed to further exploit the potential of RO membrane performance.This review is expected to guide the development of high-performance RO membranes from a mass transfer theory standpoint.
基金This project is supported by General Electric Company and National Advanced Technology Project of China(No.863-511-942-018).
文摘A novel method to extract conic blending feature in reverse engineering is presented. Different from the methods to recover constant and variable radius blends from unorganized points, it contains not only novel segmentation and feature recognition techniques, but also bias corrected technique to capture more reliable distribution of feature parameters along the spine curve. The segmentation depending on point classification separates the points in the conic blend region from the input point cloud. The available feature parameters of the cross-sectional curves are extracted with the processes of slicing point clouds with planes, conic curve fitting, and parameters estimation and compensation, The extracted parameters and its distribution laws are refined according to statistic theory such as regression analysis and hypothesis test. The proposed method can accurately capture the original design intentions and conveniently guide the reverse modeling process. Application examples are presented to verify the high precision and stability of the proposed method.
文摘Based on Maxwell’s constraint counting theory, rigidity percolation in GexSe1-x glasses occurs when the mean coordination number reaches the value of 2.4. This corresponds to Ge0.20Se0.80 glass. At this composition, the number of constraints experienced by an atom equals the number of degrees of freedom in three dimensions. Hence, at this composition, the network changes from a floppy phase to a rigid phase, and rigidity starts to percolate. In this work, we use reverse Monte Carlo (RMC) modeling to model the structure of Ge0.20Se0.80 glass by simulating its experimental total atomic pair distribution function (PDF) obtained via high energy synchrotron radiation. A three-dimensional configuration of 2836 atoms was obtained, from which we extracted the partial atomic pair distribution functions associated with Ge-Ge, Ge-Se and Se-Se real space correlations that are hard to extract experimentally from total scattering methods. Bond angle distributions, coordination numbers, mean coordination numbers and the number of floppy modes were also extracted and discussed. More structural insights about network topology at this composition were illustrated. The results indicate that in Ge0.20Se0.80 glass, Ge atoms break up and cross-link the Se chain structure, and form structural units that are four-fold coordinated (the GeSe4 tetrahedra). These tetrahedra form the basic building block and are connected via shared Se atoms or short Se chains. The extent of the intermediate ranged oscillations in real space (as extracted from the width of the first sharp diffraction peak) was found to be around 19.6 ?. The bonding schemes in this glass are consistent with the so-called “8-N” rule and can be interpreted in terms of a chemically ordered network model.
基金financially supported by the National Natural Science Foundation of China(Nos.41104069 and 41274124)the National 973 Project(Nos.2014CB239006 and 2011CB202402)+1 种基金the Shandong Natural Science Foundation of China(No.ZR2011DQ016)Fundamental Research Funds for Central Universities(No.R1401005A)
文摘The mapping method is a forward-modeling method that transforms the irregular surface to horizontal by mapping the rectangular grid as curved; moreover, the wave field calculations move from the physical domain to the calculation domain. The mapping method deals with the irregular surface and the low-velocity layer underneath it using a fine grid. For the deeper high-velocity layers, the use of a fine grid causes local oversampling. In addition, when the irregular surface is transformed to horizontal, the flattened interface below the surface is transformed to curved, which produces inaccurate modeling results because of the presence of ladder-like burrs in the simulated seismic wave. Thus, we propose the mapping method based on the dual-variable finite-difference staggered grid. The proposed method uses different size grid spacings in different regions and locally variable time steps to match the size variability of grid spacings. Numerical examples suggest that the proposed method requires less memory storage capacity and improves the computational efficiency compared with forward modeling methods based on the conventional grid.
基金supported by the National Natural Science Foundation of China(No.41174087,41204089)the National Oil and Gas Major Project(No.2011ZX05005-005)
文摘We investigated the effect of microscopic distribution modes of hydrates in porous sediments, and the saturation of hydrates and free gas on the elastic properties of saturated sediments. We simulated the propagation of seismic waves in gas hydrate-bearing sediments beneath the seafloor, and obtained the common receiver gathers of compressional waves（P-waves） and shear waves（S-waves）. The numerical results suggest that the interface between sediments containing gas hydrates and free gas produces a large-amplitude bottomsimulating reflector. The analysis of multicomponent common receiver data suggests that ocean-bottom seismometers receive the converted waves of upgoing P- and S-waves, which increases the complexity of the wavefield record.
基金financially supported by the National Hi-tech Research and Development Program of China(863 Program)(No.2012AA09A20103)
文摘Since the ocean bottom is a sedimentary environment wherein stratification is well developed, the use of an anisotropic model is best for studying its geology. Beginning with Maxwell＇s equations for an anisotropic model, we introduce scalar potentials based on the divergence-free characteristic of the electric and magnetic （EM） fields. We then continue the EM fields down into the deep earth and upward into the seawater and couple them at the ocean bottom to the transmitting source. By studying both the DC apparent resistivity curves and their polar plots, we can resolve the anisotropy of the ocean bottom. Forward modeling of a high-resistivity thin layer in an anisotropic half-space demonstrates that the marine DC resistivity method in shallow water is very sensitive to the resistive reservoir but is not influenced by airwaves. As such, it is very suitable for oil and gas exploration in shallowwater areas but, to date, most modeling algorithms for studying marine DC resistivity are based on isotropic models. In this paper, we investigate one-dimensional anisotropic forward modeling for marine DC resistivity method, prove the algorithm to have high accuracy, and thus provide a theoretical basis for 2D and 3D forward modeling.
基金supported by the National Natural Science Foundation of China(Grant Nos.41404101,41174114,41274130,and 41404102)
文摘AVO forward modeling is based on two-phase medium theory and is considered an effective method for describing reservoir rocks and fluids. However, the method depends on the input matrix mineral bulk modulus and the rationality of the two-phase medium model. We used the matrix mineral bulk modulus inversion method and multiple constraints to obtain a two-phase medium model with physical meaning. The proposed method guarantees the reliability of the obtained AVO characteristicsin two-phase media. By the comparative analysis of different lithology of the core sample, the advantages and accuracy of the inversion method can be illustrated. Also, the inversion method can be applied in LH area, and the AVO characteristics can be obtained when the porosity, fluid saturation, and other important lithology parameters are changed. In particular, the reflection coefficient amplitude difference between the fast P wave and S wave as a function of porosity at the same incidence angle, and the difference in the incidence angle threshold can be used to decipher porosity.
基金The National Natural Science Foundation of China(No.60621002)the National High Technology Research and Development Pro-gram of China(863 Program)(No.2007AA01Z2B4).
文摘A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the parameters, the back- propagation algorithm is applied to train the proposed neural networks. The proposed model is verified by the typical odd- order-only memory polynomial model in simulation, and the performance is compared with different numbers of taped delay lines（TDLs） and perceptrons of the hidden layer. For validating the TDFFNN model by experiments, a digital test bench is set up to collect input and output data of power amplifiers at a 60 × 10^6 sample/s sampling rate. The 3.75 MHz 16-QAM signal generated in the vector signal generator（VSG） is chosen as the input signal, when measuring the dynamic AM/AM and AM/PM characteristics of power amplifiers. By comparisons and analyses, the presented model provides a good performance in convergence, accuracy and efficiency, which is approved by simulation results and experimental results in the time domain and frequency domain.
基金supported by the Program for New Century Excellent Talents in University(No.NCET-04-0370)
文摘We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have established several 1-D resistivity models which have different gas hydrate concentrations. Meanwhile, we analyzed the electromagnetic response of marine gas hydrates in the frequency domain based on these models. We also studied the relationship between electrical field magnitude or phase and parameters such as receiver-transmitter distance and frequency. Our numerical modeling results provide us with a quantitative reference for exploration and resource evaluation of marine gas hydrates.
基金The authors are grateful for the financial support by the National Natural Science Foundation of China(Grant No.50635030)the Scientific and Technological Development Project of Jilin Province(Grant No.20050539)the"985 Project"of Jilin University.
文摘In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough. The reverse engineering technology was adopted to obtain the surface geometrical information of the head. Several three-dimensional （3D） point clouds of the head were captured first using a non-touch laser scanner, and an integrated point cloud was generated by aligning these point clouds using UG/Imageware. Then, the digital surface model of the head was rebuilt by means of CATIA. The characteristic curves of the surface model were analyzed. The results show that the average error between the rebuilt surface and the point cloud is -0.431 ram. The max curvature of the ridge on the neb of the head is 0.187 mm^-1, and the max and rain Gauss curvatures on the surface are 0.008 mm^-2 and -0.002 mm^-2. These geometrical information are the essential parameters for biomimetics study of the ridger.
基金supported by the National Nature Science Foundation of China(Nos.41504102 and 41604037)National Science and Technology Major Project(No.2016ZX05015-006)Yangtze University Youth Found(No.2015cqn32)
文摘Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transformation to curvilinear coordinates using body-fitted grids have been proposed, e.g., stand staggered grid(SSG) with interpolation, nonstaggered grid, rotated staggered grid(RSG), and fully staggered. The FD based on the RSG is somewhat superior to others because it satisfies the spatial distribution of the wave equation without additional memory and computational requirements; furthermore, it is simpler to implement. We use the RSG FD method to transform the firstorder stress–velocity equation in the curvilinear coordinates system and introduce the highprecision adaptive, unilateral mimetic finite-difference(UMFD) method to process the freeboundary conditions of an irregular surface. The numerical results suggest that the precision of the solution is higher than that of the vacuum formalism. When the minimum wavelength is low, UMFD avoids the surface wave dispersion. We compare FD methods based on RSG, SEM, and nonstaggered grid and infer that all simulation results are consistent but the computational efficiency of the RSG FD method is higher than the rest.
基金The work has been supported by the National High Technology Research and Development Program 863 of China(2011AA050106)the Fundamental Research Funds for the Central Universities(2012YH01).
文摘This research focused on the feasibility of applying the forward and reverse combustion approach to the in situ gasification of lignite with the production of hydrogen-rich syngas(H_(2)and CO).The so-called forward combustion gasification(FCG)and reverse combustion gasification(RCG)approach in which oxygen and steam are simultaneously fed to the simulated system of underground coal gasification(UCG)was studied.A simulated system of UCG was designed and established.The underground conditions of the coal seam and strata were simulated in the system.The combustion gasification of lignite has been carried out experimentally for almost 6.5 days.The average effective content(H_(2)+CO)of syngas during the FCG phase was 62.31%and the maximum content was 70.92%.For the RCG phase the corresponding figures are 61.33%and 67.91%.Thus,the feasibility of using RCG way for UCG has been demonstrated.The temperature profiles have been provided by using of 85 thermocouples during the model experiment,which portrayed the several nephograms of thermal data in the gasifier were of significance for the prospective gasification processes.
基金This research is sponsored by the National Natural Science Foundation of China （No. 40374024）.
文摘The workload of the 3D magnetotelluric forward modeling algorithm is so large that the traditional serial algorithm costs an extremely large compute time. However, the 3D forward modeling algorithm can process the data in the frequency domain, which is very suitable for parallel computation. With the advantage of MPI and based on an analysis of the flow of the 3D magnetotelluric serial forward algorithm, we suggest the idea of parallel computation and apply it. Three theoretical models are tested and the execution efficiency is compared in different situations. The results indicate that the parallel 3D forward modeling computation is correct and the efficiency is greatly improved. This method is suitable for large size geophysical computations.
