Precise measurements of the cavity forward(Vf)and reflected signals(Vr)are essential for characterizing other key parameters such as the cavity detuning and forward power.In practice,it is challenging to measure V_(f)...Precise measurements of the cavity forward(Vf)and reflected signals(Vr)are essential for characterizing other key parameters such as the cavity detuning and forward power.In practice,it is challenging to measure V_(f) and V_(r) precisely because of cross talk between the forward and reflected channels(e.g.,coupling between the cavity reflected and forward signals in a directional coupler with limited directivity).For DESY,a method based on the cavity differential equation was proposed to precisely calibrate the actual V_(f) and V_(r).In this study,we verified the validity and practicability of this approach for the Chinese ADS front-end demo superconducting linac(CAFe)facility at the Institute of Modern Physics and a compact energy recovery linac(cERL)test machine at KEK.At the CAFe facility,we successfully calibrated the actual V_(f) signal using this method.The result demonstrated that the directivity of directional couplers might seriously affect the accuracy of V_(f) measurement.At the cERL facility,we calibrated the Lorentz force detuning(LFD)using the actual Vf.Our study confirmed that the precise calibration of V_(f) significantly improves the accuracy of the cavity LFD measurement.展开更多
A study has been made on the reflected and transmitted powers generated when an arbitrarily polarized plane wave impinges at a planar interface separating an isotropic achiral medium(IAM) and an isotropic chiral mediu...A study has been made on the reflected and transmitted powers generated when an arbitrarily polarized plane wave impinges at a planar interface separating an isotropic achiral medium(IAM) and an isotropic chiral medium(ICM). It follows that the theoretical formulas are derived for the normalized reflection and transmission powers from an IAM–ICM interface for an arbitrary polarized incident wave, and those at an ICM–IAM interface for right-hand circularly polarized(RCP) or left-hand circularly polarized(LCP) incident wave are also obtained. The behavior of the reflected and transmitted waves in different cases is studied, and the dependence of the reflection/transmission of the incident wave on the incident angle and the parameters of the media is investigated in detail. Our numerical results show that high transmission is exhibited under the impedance matching condition and the incident wave can be split into two waves of the same circular polarization state in the case of the ICM–IAM interface, which indicates that circular polarizing beam splitter is achieved.展开更多
The power generation performance of a heaving body wave energy converter(HBWEC)can be enhanced through strategic deployment in proximity to natural or artificial coastal structures.In this study,coastal structures are...The power generation performance of a heaving body wave energy converter(HBWEC)can be enhanced through strategic deployment in proximity to natural or artificial coastal structures.In this study,coastal structures are represented by a partial reflection wall,enabling the device to harness additional reflected wave energy.However,the mechanisms by which the reflection coefficient and the clearance between the wall and the device affect energy conversion performance remain inadequately understood.This study experimentally investigates these effects.The findings demonstrate that the clearance impact on HBWEC power performance near partial reflection walls aligns with standing wave variation characteristics,with optimal positioning near the second antinode of the HBWEC's heaving natural period.Enhanced reflection coefficients improve energy conversion efficiency within the wave spectrum around the device's heaving natural period.Additionally,significant water sloshing observed within the clearance may diminish power performance,as verified through computational fluid dynamics(CFD)analysis.This phenomenon results from the multiplicative relationship of leeside clearance with 0.5λ(λis the wavelength).These insights suggest that practical engineering implementation requires balanced consideration of reflection coefficient,clearance,sloshing phenomenon,and heaving restriction system,rather than individual parameter optimization.展开更多
A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the paramet...A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the parameters, the back- propagation algorithm is applied to train the proposed neural networks. The proposed model is verified by the typical odd- order-only memory polynomial model in simulation, and the performance is compared with different numbers of taped delay lines（TDLs） and perceptrons of the hidden layer. For validating the TDFFNN model by experiments, a digital test bench is set up to collect input and output data of power amplifiers at a 60 × 10^6 sample/s sampling rate. The 3.75 MHz 16-QAM signal generated in the vector signal generator（VSG） is chosen as the input signal, when measuring the dynamic AM/AM and AM/PM characteristics of power amplifiers. By comparisons and analyses, the presented model provides a good performance in convergence, accuracy and efficiency, which is approved by simulation results and experimental results in the time domain and frequency domain.展开更多
Aerodynamic forces and power requirements in forward flight in a bumblebee （Bombus terrestris） were studied using the method of computational fluid dynamics. Actual wing kinematic data of free flight were used in th...Aerodynamic forces and power requirements in forward flight in a bumblebee （Bombus terrestris） were studied using the method of computational fluid dynamics. Actual wing kinematic data of free flight were used in the study （the speed ranges from 0 m/s to 4.5 m/s; advance ratio ranges from 0-0.66）. The bumblebee employs the delayed stall mechanism and the fast pitching-up rotation mechanism to produce vertical force and thrust. The leading-edge vortex does not shed in the translatory phase of the half-strokes and is much more concentrated than that of the fruit fly in a previous study. At hovering and low-speed flight, the vertical force is produced by both the half-strokes and is contributed by wing lift; at medium and high speeds, the vertical force is mainly produced during the downstroke and is contributed by both wing lift and wing drag. At all speeds the thrust is mainly produced in the upstroke and is contributed by wing drag. The power requirement at low to medium speeds is not very different from that of hovering and is relatively large at the highest speed （advance ratio 0.66）, i.e. the power curve is Jshaped. Except at the highest flight speed, storing energy elastically can save power up to 20%-30%. At the highest speed, because of the large increase of aerodynamic torque and the slight decrease of inertial torque （due to the smaller stroke amplitude and stroke frequency used）, the power requirement is dominated by aerodynamic power and the effect of elastic storage of energy on power requirement is limited.展开更多
Wave reflection and transmission in a beam containing a semi-infinite crack are studied analytically based on Timoshenko beam theory., Two kinds of crack surface conditions： non-contact （open） and fully contact （c...Wave reflection and transmission in a beam containing a semi-infinite crack are studied analytically based on Timoshenko beam theory., Two kinds of crack surface conditions： non-contact （open） and fully contact （closed） cracks, are considered respectively for an isotropic beam. The analytical solution of reflection and transmission coefficients for a semi-infinite crack is obtained. The power reflection and transmission ratios depend on both the frequency and the position of the crack. Numerical results show the conservation of power transport. The transmitted energy among various wave modes is also investigated. A finite element method is used to verify the validity of the analytical results.展开更多
A simple theoretical modeling is made to describe the reflection features of the high power microwave (HPM) in the mixture-atmosphere. The time-space dependent mixture-atmosphere is generated by ionization of the neut...A simple theoretical modeling is made to describe the reflection features of the high power microwave (HPM) in the mixture-atmosphere. The time-space dependent mixture-atmosphere is generated by ionization of the neutral molecules in atmosphere. Reflection will occur when HPM propagates in such mixture-atmosphere. The reflection characteristic of the HPM propagation in the mixture-atmosphere is investigated by FDTD numerical experiments in inhomogeneous medium, the influence on the reflection for different HPM parameters is concluded. An additional stability conditions for the FDTD difference scheme of the HPM mixture-atmosphere propagation model are presented.展开更多
Balance power control is based on the idea of balancing Carrier to Interference Ratio (CIR) of all wireless links. Unbalance power control means that different traffics can achieve different CIR at receivers. This pap...Balance power control is based on the idea of balancing Carrier to Interference Ratio (CIR) of all wireless links. Unbalance power control means that different traffics can achieve different CIR at receivers. This paper proposes a forward link partial-balance power control algorithm, which can provide necessary Quality of Service (QoS) for multimedia traffics in Wideband CDMA(W-CDMA) systems. The proposed algorithm is the integration of grading traffics priority and allocating and adjusting forward link power levels. For higher priority traffics, the unbalance power control is used. Whereas for lower priority traffics, balance power control is adopted. Computer simulation results show that the proposed algorithm can guarantee the special QoS requirements of the traffics with higher priority orders and maximize the CIR of the traffics with lower priority orders.展开更多
Retro reflective beamforming technique has the potential of enabling efficient wireless power transmission over long distance(on the order of meters and even kilometers).In retro reflective beamforming,wireless power ...Retro reflective beamforming technique has the potential of enabling efficient wireless power transmission over long distance(on the order of meters and even kilometers).In retro reflective beamforming,wireless power transmission is guided by pilot signal:Based upon pilot signal broadcasted by a wireless power receiver,a wireless power transmitter delivers focused microwave power beam(s)onto the location of wireless power receiver.When the wireless power receiver’s location is not fixed or when the wireless power receiver’s location is unknown to the wireless power transmitter,the microwave power beam would follow the wireless power receiver’s location dynamically as long as the wireless power receiver broadcasts pilot signal periodically.This paper reviews our research endeavors in recent years on retro reflective beamforming technique targeting three applications:(1)wireless charging for low power mobile/portable electronic devices,(2)space solar power satellites(SSPS)application,and(3)wireless charging in fully enclosed space.The feasibility and potential of retro reflective beamforming technique with applications in wireless power transmission are demonstrated by some preliminary experimental results.展开更多
The performance of symbiotic radio(SR)networks can be improved by equipping secondary transmitters(STs)with intelligent reflecting surfaces(IRSs).Since the IRS power consumption is a non-negligible issue for STs,we co...The performance of symbiotic radio(SR)networks can be improved by equipping secondary transmitters(STs)with intelligent reflecting surfaces(IRSs).Since the IRS power consumption is a non-negligible issue for STs,we consider an IRS assisted SR system where the IRS operates under power splitting(PS)mode.We aim at minimizing the IRS power consumption for the ST under the quality of service constraints for both primary and secondary transmissions by optimizing the transmit beamforming,the reflect beamforming and the PS factor.The optimization problem is non-convex.To tackle it,an algorithm is proposed by employing the block coordinate descent,semidefinite relaxation and alternating direction method of multipliers techniques.Simulation results demonstrate the efficiency and effectiveness of the proposed algorithm.展开更多
In this paper,we study an Intelligent Reflecting Surface(IRS)assisted Mobile Edge Computing(MEC)system under eavesdropping threats,where the IRS is used to enhance the energy signal transmission and the offloading per...In this paper,we study an Intelligent Reflecting Surface(IRS)assisted Mobile Edge Computing(MEC)system under eavesdropping threats,where the IRS is used to enhance the energy signal transmission and the offloading performance between Wireless Devices(WDs)and the Access Point(AP).Specifically,in the proposed scheme,the AP first powers all WDs with the wireless power transfer through both direct and IRS-assisted links.Then,powered by the harvested energy,all WDs securely offload their computation tasks through the two links in the time division multiple access mode.To determine the local and offloading computational bits,we formulate an optimization problem to jointly design the IRS's phase shift and allocate the time slots constrained by the security and energy requirements.To cope with this non-convex optimization problem,we adopt semidefinite relaxations,singular value decomposition techniques,and Lagrange dual method.Moreover,we propose a dichotomy particle swarm algorithm based on the bisection method to process the overall optimization problem and improve the convergence speed.The numerical results illustrate that the proposed scheme can boost the performance of MEC and secure computation rates compared with other IRS-assisted MEC benchmark schemes.展开更多
In this paper, we present a special spectrum sharing scheme that is a joint optimization of relay selection and power allocation at the secondary transmitter, where the primary user is incapable of supporting its targ...In this paper, we present a special spectrum sharing scheme that is a joint optimization of relay selection and power allocation at the secondary transmitter, where the primary user is incapable of supporting its target signal-to-noise ratio(SNR). Specifically, the selected secondary transmitter assists the primary user with achieving its target SNR via two-phase cooperative amplify-and-forward relaying. By searching for the candidate secondary transmitters which have already satisfied the primary user's target SNR, we can select the optimal secondary transmitter. This optimal secondary transmitter not only satisfies the primary user's target SNR,but also maximizes the throughput of the secondary user. We study this joint optimization problem such that the secondary user's throughput is maximized under the constraint that satisfies the primary user's target SNR.Numerical results show that our scheme can maximize the throughput of the secondary user, and can obtain the win-win solution for the primary and secondary systems.展开更多
As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting ...As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting surface(IRS)is introduced into its signal propagation path.Consequently,an IRSaided PSR is concerned for a point-to-point(P2P)data link,where both the single-antenna and multiantenna deployments on the receiver are discussed.We aim at maximizing the capacity of the concerned P2P data-link by jointly optimizing the passive beamforming of IRS and the splitting ratio of PSR,either in single-antenna or multi-antenna case.However,owing to the coupling of multiple variables,the optimization problems are non-convex and challenging,especially in the later multi-antenna case.The proposed alternating-approximating algorithm(A-A),aided by semi-definite relaxation(SDR)and successive convex approximation(SCA)methods,etc.,successfully overcomes these challenges.We compare the IRS-aided PSR system that optimized by our proposed algorithm to the systems without IRS or PSR,and the systems without joint optimization.The simulation results show that our proposal has a better performance.展开更多
基金supported by the project of “studies of intelligent LLRF control algorithms for superconducting RF cavities(No.E129851YR0)”。
文摘Precise measurements of the cavity forward(Vf)and reflected signals(Vr)are essential for characterizing other key parameters such as the cavity detuning and forward power.In practice,it is challenging to measure V_(f) and V_(r) precisely because of cross talk between the forward and reflected channels(e.g.,coupling between the cavity reflected and forward signals in a directional coupler with limited directivity).For DESY,a method based on the cavity differential equation was proposed to precisely calibrate the actual V_(f) and V_(r).In this study,we verified the validity and practicability of this approach for the Chinese ADS front-end demo superconducting linac(CAFe)facility at the Institute of Modern Physics and a compact energy recovery linac(cERL)test machine at KEK.At the CAFe facility,we successfully calibrated the actual V_(f) signal using this method.The result demonstrated that the directivity of directional couplers might seriously affect the accuracy of V_(f) measurement.At the cERL facility,we calibrated the Lorentz force detuning(LFD)using the actual Vf.Our study confirmed that the precise calibration of V_(f) significantly improves the accuracy of the cavity LFD measurement.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61431010 and 61501350)the National Key Basic Research Program of China(Grant No.2014CB340203)
文摘A study has been made on the reflected and transmitted powers generated when an arbitrarily polarized plane wave impinges at a planar interface separating an isotropic achiral medium(IAM) and an isotropic chiral medium(ICM). It follows that the theoretical formulas are derived for the normalized reflection and transmission powers from an IAM–ICM interface for an arbitrary polarized incident wave, and those at an ICM–IAM interface for right-hand circularly polarized(RCP) or left-hand circularly polarized(LCP) incident wave are also obtained. The behavior of the reflected and transmitted waves in different cases is studied, and the dependence of the reflection/transmission of the incident wave on the incident angle and the parameters of the media is investigated in detail. Our numerical results show that high transmission is exhibited under the impedance matching condition and the incident wave can be split into two waves of the same circular polarization state in the case of the ICM–IAM interface, which indicates that circular polarizing beam splitter is achieved.
基金supported by the National Natural Science Foundation of China(Grant Nos.52201322,52401323,and52222109)the Fundamental Research Funds for the Central Universities(Grant No.2024ZYGXZR042)+1 种基金Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2022B1515020036 and 2023A1515012144)the Project of State Key Laboratory of Subtropical Building and Urban Science(Grant No.2023ZB14)。
文摘The power generation performance of a heaving body wave energy converter(HBWEC)can be enhanced through strategic deployment in proximity to natural or artificial coastal structures.In this study,coastal structures are represented by a partial reflection wall,enabling the device to harness additional reflected wave energy.However,the mechanisms by which the reflection coefficient and the clearance between the wall and the device affect energy conversion performance remain inadequately understood.This study experimentally investigates these effects.The findings demonstrate that the clearance impact on HBWEC power performance near partial reflection walls aligns with standing wave variation characteristics,with optimal positioning near the second antinode of the HBWEC's heaving natural period.Enhanced reflection coefficients improve energy conversion efficiency within the wave spectrum around the device's heaving natural period.Additionally,significant water sloshing observed within the clearance may diminish power performance,as verified through computational fluid dynamics(CFD)analysis.This phenomenon results from the multiplicative relationship of leeside clearance with 0.5λ(λis the wavelength).These insights suggest that practical engineering implementation requires balanced consideration of reflection coefficient,clearance,sloshing phenomenon,and heaving restriction system,rather than individual parameter optimization.
基金The National Natural Science Foundation of China(No.60621002)the National High Technology Research and Development Pro-gram of China(863 Program)(No.2007AA01Z2B4).
文摘A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the parameters, the back- propagation algorithm is applied to train the proposed neural networks. The proposed model is verified by the typical odd- order-only memory polynomial model in simulation, and the performance is compared with different numbers of taped delay lines（TDLs） and perceptrons of the hidden layer. For validating the TDFFNN model by experiments, a digital test bench is set up to collect input and output data of power amplifiers at a 60 × 10^6 sample/s sampling rate. The 3.75 MHz 16-QAM signal generated in the vector signal generator（VSG） is chosen as the input signal, when measuring the dynamic AM/AM and AM/PM characteristics of power amplifiers. By comparisons and analyses, the presented model provides a good performance in convergence, accuracy and efficiency, which is approved by simulation results and experimental results in the time domain and frequency domain.
基金The project supported by the National Natural Science Foundation of China(10232010)the National Aeronautic Science fund of China(03A51049)
文摘Aerodynamic forces and power requirements in forward flight in a bumblebee （Bombus terrestris） were studied using the method of computational fluid dynamics. Actual wing kinematic data of free flight were used in the study （the speed ranges from 0 m/s to 4.5 m/s; advance ratio ranges from 0-0.66）. The bumblebee employs the delayed stall mechanism and the fast pitching-up rotation mechanism to produce vertical force and thrust. The leading-edge vortex does not shed in the translatory phase of the half-strokes and is much more concentrated than that of the fruit fly in a previous study. At hovering and low-speed flight, the vertical force is produced by both the half-strokes and is contributed by wing lift; at medium and high speeds, the vertical force is mainly produced during the downstroke and is contributed by both wing lift and wing drag. At all speeds the thrust is mainly produced in the upstroke and is contributed by wing drag. The power requirement at low to medium speeds is not very different from that of hovering and is relatively large at the highest speed （advance ratio 0.66）, i.e. the power curve is Jshaped. Except at the highest flight speed, storing energy elastically can save power up to 20%-30%. At the highest speed, because of the large increase of aerodynamic torque and the slight decrease of inertial torque （due to the smaller stroke amplitude and stroke frequency used）, the power requirement is dominated by aerodynamic power and the effect of elastic storage of energy on power requirement is limited.
基金the National Natural Science Foundation of China(Nos.50478037 and 10572058)the Research Foundation for the Doctoral Program of Higher Education(No.20050287016).
文摘Wave reflection and transmission in a beam containing a semi-infinite crack are studied analytically based on Timoshenko beam theory., Two kinds of crack surface conditions： non-contact （open） and fully contact （closed） cracks, are considered respectively for an isotropic beam. The analytical solution of reflection and transmission coefficients for a semi-infinite crack is obtained. The power reflection and transmission ratios depend on both the frequency and the position of the crack. Numerical results show the conservation of power transport. The transmitted energy among various wave modes is also investigated. A finite element method is used to verify the validity of the analytical results.
文摘A simple theoretical modeling is made to describe the reflection features of the high power microwave (HPM) in the mixture-atmosphere. The time-space dependent mixture-atmosphere is generated by ionization of the neutral molecules in atmosphere. Reflection will occur when HPM propagates in such mixture-atmosphere. The reflection characteristic of the HPM propagation in the mixture-atmosphere is investigated by FDTD numerical experiments in inhomogeneous medium, the influence on the reflection for different HPM parameters is concluded. An additional stability conditions for the FDTD difference scheme of the HPM mixture-atmosphere propagation model are presented.
文摘Balance power control is based on the idea of balancing Carrier to Interference Ratio (CIR) of all wireless links. Unbalance power control means that different traffics can achieve different CIR at receivers. This paper proposes a forward link partial-balance power control algorithm, which can provide necessary Quality of Service (QoS) for multimedia traffics in Wideband CDMA(W-CDMA) systems. The proposed algorithm is the integration of grading traffics priority and allocating and adjusting forward link power levels. For higher priority traffics, the unbalance power control is used. Whereas for lower priority traffics, balance power control is adopted. Computer simulation results show that the proposed algorithm can guarantee the special QoS requirements of the traffics with higher priority orders and maximize the CIR of the traffics with lower priority orders.
基金supported in part by the National Natural Science Foundations of China (Nos. 61871220, 61471195, 61628106)the United States National Science Foundation (Nos. ECCS 1303142, ECCS 1503600)
文摘Retro reflective beamforming technique has the potential of enabling efficient wireless power transmission over long distance(on the order of meters and even kilometers).In retro reflective beamforming,wireless power transmission is guided by pilot signal:Based upon pilot signal broadcasted by a wireless power receiver,a wireless power transmitter delivers focused microwave power beam(s)onto the location of wireless power receiver.When the wireless power receiver’s location is not fixed or when the wireless power receiver’s location is unknown to the wireless power transmitter,the microwave power beam would follow the wireless power receiver’s location dynamically as long as the wireless power receiver broadcasts pilot signal periodically.This paper reviews our research endeavors in recent years on retro reflective beamforming technique targeting three applications:(1)wireless charging for low power mobile/portable electronic devices,(2)space solar power satellites(SSPS)application,and(3)wireless charging in fully enclosed space.The feasibility and potential of retro reflective beamforming technique with applications in wireless power transmission are demonstrated by some preliminary experimental results.
基金supported by the Fundamental Research Funds for the Central Universities(No.FRF-TP-20-106A1)。
文摘The performance of symbiotic radio(SR)networks can be improved by equipping secondary transmitters(STs)with intelligent reflecting surfaces(IRSs).Since the IRS power consumption is a non-negligible issue for STs,we consider an IRS assisted SR system where the IRS operates under power splitting(PS)mode.We aim at minimizing the IRS power consumption for the ST under the quality of service constraints for both primary and secondary transmissions by optimizing the transmit beamforming,the reflect beamforming and the PS factor.The optimization problem is non-convex.To tackle it,an algorithm is proposed by employing the block coordinate descent,semidefinite relaxation and alternating direction method of multipliers techniques.Simulation results demonstrate the efficiency and effectiveness of the proposed algorithm.
基金supported in part by the National Natural Science Foundation of China under Grant 62271399 and 62206221in part by the Key Research and Development Program of Shaanxi Province under Grant 2022KW-07+1 种基金in part by National Key Research and Development Program of China under Grant 2020YFB1807003in part by the Shanghai Sailing Program under Grant 20YF1416700。
文摘In this paper,we study an Intelligent Reflecting Surface(IRS)assisted Mobile Edge Computing(MEC)system under eavesdropping threats,where the IRS is used to enhance the energy signal transmission and the offloading performance between Wireless Devices(WDs)and the Access Point(AP).Specifically,in the proposed scheme,the AP first powers all WDs with the wireless power transfer through both direct and IRS-assisted links.Then,powered by the harvested energy,all WDs securely offload their computation tasks through the two links in the time division multiple access mode.To determine the local and offloading computational bits,we formulate an optimization problem to jointly design the IRS's phase shift and allocate the time slots constrained by the security and energy requirements.To cope with this non-convex optimization problem,we adopt semidefinite relaxations,singular value decomposition techniques,and Lagrange dual method.Moreover,we propose a dichotomy particle swarm algorithm based on the bisection method to process the overall optimization problem and improve the convergence speed.The numerical results illustrate that the proposed scheme can boost the performance of MEC and secure computation rates compared with other IRS-assisted MEC benchmark schemes.
基金the National High Technology Research and Development Program(863) of China(No.2014AA01A706)the National Major Science and Technology Special Project of China(Nos.2012ZX03001021 and 2012ZX03005008)+3 种基金the National Natural Science Foundation of China(No.61379159)the Chongqing City College Innovation Team(2013)the Chongqing Municipal Education Commission Science and Technology Research Project(No.KJ130513)the Chongqing Basic and Cutting-Edge Project(No.cstc2013jcyj A40020)
文摘In this paper, we present a special spectrum sharing scheme that is a joint optimization of relay selection and power allocation at the secondary transmitter, where the primary user is incapable of supporting its target signal-to-noise ratio(SNR). Specifically, the selected secondary transmitter assists the primary user with achieving its target SNR via two-phase cooperative amplify-and-forward relaying. By searching for the candidate secondary transmitters which have already satisfied the primary user's target SNR, we can select the optimal secondary transmitter. This optimal secondary transmitter not only satisfies the primary user's target SNR,but also maximizes the throughput of the secondary user. We study this joint optimization problem such that the secondary user's throughput is maximized under the constraint that satisfies the primary user's target SNR.Numerical results show that our scheme can maximize the throughput of the secondary user, and can obtain the win-win solution for the primary and secondary systems.
基金supported by National Key R&D Program of China with Grant number 2019YFB1803400in part by Sichuan Science and Technology Program under Grant 2024NSFSC0472。
文摘As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting surface(IRS)is introduced into its signal propagation path.Consequently,an IRSaided PSR is concerned for a point-to-point(P2P)data link,where both the single-antenna and multiantenna deployments on the receiver are discussed.We aim at maximizing the capacity of the concerned P2P data-link by jointly optimizing the passive beamforming of IRS and the splitting ratio of PSR,either in single-antenna or multi-antenna case.However,owing to the coupling of multiple variables,the optimization problems are non-convex and challenging,especially in the later multi-antenna case.The proposed alternating-approximating algorithm(A-A),aided by semi-definite relaxation(SDR)and successive convex approximation(SCA)methods,etc.,successfully overcomes these challenges.We compare the IRS-aided PSR system that optimized by our proposed algorithm to the systems without IRS or PSR,and the systems without joint optimization.The simulation results show that our proposal has a better performance.
