This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setti...This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setting time of polyurethane was further investigated using molecular dynamics simulations.Fourier transform infrared spectroscopy was also employed to systematically study the physical and chemical interactions between phosphate esters and polyurethane materials.The results demonstrate that a 1%concentration of phosphate ester provides the most effective retarding effect with minimal impact on the strength of polyurethane.When phosphate ester is added to the B component of the two-component polyurethane system,its interaction energy with component A decreases,as do the diffusion coefficient and aggregation degree of component B on the surface of component A.This reduction in interaction slows the setting time.Additionally,the addition of phosphate ester to polyurethane leads to the disappearance or weakening of functional groups,indicating competitive interactions within the phosphate ester components that inhibit the reaction rate.展开更多
The three dimensional variable cross-section roll forming is a kind of new metal forming technol- ogy which combines large forming force, multi-axis linkage movement and space synergic movement, and the sequential syn...The three dimensional variable cross-section roll forming is a kind of new metal forming technol- ogy which combines large forming force, multi-axis linkage movement and space synergic movement, and the sequential synergic movement of the ganged roller group is used to complete the metal sheet forming according to the shape of the complicated and variable forming part data. The control system should meet the demands of quick response to the test requirements of the product part. A new kind of real time data driving multi-axis linkage and synergic movement control strategy of 3D roll forming is put forward in the paper. In the new control strategy, the forming data are automatically generated according to the shape of the parts, and the multi-axis linkage movement together with cooperative motion among the six stands of the 3D roll forming machine is driven by the real-time information, and the control nodes are also driven by the forming data. The new control strategy is applied to a 48 axis 3D roll forming machine developed by our research center, and the control servo period is less than 10ms. A forming experiment of variable cross section part is carried out, and the forming preci- sion is better than ＋ 0.5mm by the control strategy. The result of the experiment proves that the control strategy has significant potentiality for the development of 3D roll forming production line with large scale, multi-axis ganged and svner^ic movement展开更多
A convolutional weighting （CW） scheme applied to a half-wavelength spacing array was proposed for multi-user system to joint STBC （space time block ceding） and beam forming （BF）. The transmitting beam is equival...A convolutional weighting （CW） scheme applied to a half-wavelength spacing array was proposed for multi-user system to joint STBC （space time block ceding） and beam forming （BF）. The transmitting beam is equivalent to the product of two sub-beams. One is used to realize interference suppression, while the other is employed to form a couple of uncorrelated channels from base station （BS） to the desited user （to meet the requirement of STBC） and to maximize SINR （signal-to-interference-plus noise ratio） at the desired receiver. As an optimum combination of STBC and beam forming, the proposed scheme can achieve both full diversity order of STBC and array gain of BF. Meanwhile, it can also effec- tively restrain multi-user interference by nulling. Simulation results show that the proposed scheme can significantly improve the BER （Bit Error Rate） performance and enhance system capacity as compared with the conventional eigen-beamforming （EBF） technique applied to a half-wavelength spacing array.展开更多
Dear Editor,This letter investigates the grid-forming control for power converters.Recently,grid-forming control based on matching of synchronous machines was suggested by using continuous measurements.In the present ...Dear Editor,This letter investigates the grid-forming control for power converters.Recently,grid-forming control based on matching of synchronous machines was suggested by using continuous measurements.In the present letter,we suggest a digital implementation using artificial delays where the controller employs the discrete-time measurements only.展开更多
For poly(9,9-dioctylfluorene)(PFO),β phase (coplanar conformation with the intra-chain torsion angle of 165°) has a greater conjugation length and higher degree of order compared to those of α phase, which favo...For poly(9,9-dioctylfluorene)(PFO),β phase (coplanar conformation with the intra-chain torsion angle of 165°) has a greater conjugation length and higher degree of order compared to those of α phase, which favors charge carrier transport. However, the highest content of β phase obtained so far is 45%. We propose to increase the content of β phase by promoting the solution aggregation of PFO molecules and extending film-forming time. For this purpose, 1,8-diiodooctane (DIO) is added to PFO o-xylene solution, which enhances the interaction of PFO chains and improves the planarity of PFO backbone, resulting in the formation of ordered aggregation. The aggregates act as nucleation centers to promote the formation of β phase. The content of β phase increases with increasing DIO concentration and reaches a platform of 39% as DIO is more than 4 vol%. Furthermore, the film is kept in a sealed environment with oxylene atmosphere for 3 h, thus the PFO molecules have enough time to diffuse to the crystallization front and achieve disorder-order transition. As a result, the crystallinity of PFO is improved significantly and the content of β phase increases to 52%, reaching the highest value reported so far.展开更多
Dear Editor,This letter deals with the distributed recursive set-membership filtering(DRSMF)issue for state-saturated systems under encryption-decryption mechanism.To guarantee the data security,the encryption-decrypt...Dear Editor,This letter deals with the distributed recursive set-membership filtering(DRSMF)issue for state-saturated systems under encryption-decryption mechanism.To guarantee the data security,the encryption-decryption mechanism is considered in the signal transmission process.Specifically,a novel DRSMF scheme is developed such that,for both state saturation and encryption-decryption mechanism,the filtering error(FE)is limited to the ellipsoid domain.Then,the filtering error constraint matrix(FECM)is computed and a desirable filter gain is derived by minimizing the FECM.Besides,the bound-edness evaluation of the FECM is provided.展开更多
Geopolymer materials today represent innovative products,used frequently as a substitute for cementitious traditional materials.They are obtained by the action of an alkaline activation solution(composed of mainly of ...Geopolymer materials today represent innovative products,used frequently as a substitute for cementitious traditional materials.They are obtained by the action of an alkaline activation solution(composed of mainly of silicon dioxide(SiO2)and sodium hydroxide(NaOH)and water)on a powder natural or synthetic aluminosilicates.In this work,we seek to highlight the effect of the percentage of sodium dioxide firstly,on the evolution of the viscosity of the alkali-activated solution and secondly,on the evolution of the viscosity of geopolymeric solution.Another aspect of this work is the determination of the effect of this percentage on the kinetics that characterize the start of the percolation phenomenon(transition from the fresh state to the hardened state).At last result concerns the impact of temperature on this transition.This contribution consolidates the control protocols for the formulation of geopolymers and allows the optimization of the processes of their exploitation.展开更多
A non-incremental time-space algorithm is proposed for numerical. analysis of forming process with the inclusion of geometrical, material, contact-frictional nonlinearities. Unlike the widely used Newton-Raphso...A non-incremental time-space algorithm is proposed for numerical. analysis of forming process with the inclusion of geometrical, material, contact-frictional nonlinearities. Unlike the widely used Newton-Raphson counterpart, the present scheme features an iterative solution procedure on entire time and space domain. Validity and feasibility of foe present scheme are further justiced by the numerical investigation herewith presented.展开更多
The bio-clogging using bacteria can be an eco-friendly and sustainable alternative to conventional grouting methods for seepage control.However,it remains unclear to date how the dilute concentration of bacterium and ...The bio-clogging using bacteria can be an eco-friendly and sustainable alternative to conventional grouting methods for seepage control.However,it remains unclear to date how the dilute concentration of bacterium and medium during field installation can affect the setting time of bacterium and its correlation with permeability reduction.In this study,the setting time of bacterium and its effectiveness in permeability reduction were addressed through experimental and theoretical investigations.A series of sand column was cultivated using different concentrations of Leuconostoc mesenteroides and culture medium.The distribution and composition of the bacterial product(i.e.dextran)were observed by refractometer,scanning electron microscope(SEM),and energy dispersive X-ray spectroscopy(EDS).Soil permeability was recorded using a constant head test.The results revealed that bacterium was effective to produce dextran at the setting time of about 5 d after installation.This dextran can reduce the permeability of bio-mediated soil by two orders of magnitude,even without culture medium supply.In general,the dextran production decreased proportionally with increase of bacterium and medium concentration.However,at 50%bacterium and medium concentration by weight,it still has a significant influence on permeability reduction with similar setting time,compared to 100%concentration.展开更多
We use Hopf-Lax formula to study local regularity of solution to Hamilton- Jacobi （HJ） equations of multi-dimensional space variables with convex Hamiltonian. Then we give the large time generic form of the solution...We use Hopf-Lax formula to study local regularity of solution to Hamilton- Jacobi （HJ） equations of multi-dimensional space variables with convex Hamiltonian. Then we give the large time generic form of the solution to HJ equation, i.e. for most initial data there exists a constant T 〉 0, which depends only on the Hamiltonian and initial datum, for t 〉 T the solution of the IVP （1.1） is smooth except for ~ smooth n-dimensional hypersurface, across which Du（x, t） is discontinuous. And we show that the hypersurface 1 tends asymptotically to a given hypersurface with rate t-1/4.展开更多
In order to veritably measure the first peak of hydration heat evolution that has been illustrated important in indicating cement behavior in early hydration, an improved way of water addition into cement in isotherma...In order to veritably measure the first peak of hydration heat evolution that has been illustrated important in indicating cement behavior in early hydration, an improved way of water addition into cement in isothermally calorimetric experiment is put forward. The experimental results indicated that: the magnitude of first peak of heat evolution varies from sample to sample, correlation between heat evolution during first peak of heat evolution and initial (as well as final) setting time is unsatisfactory when samples are not classified; while groups of sample classified based on strength grade represent satisfactory correlations, which indicating the existence of close relation between hydration heat evolution in much earlier hydration age and setting property of cement in rather later age. Importance of first peak in hydration heat evolution for understanding cement setting property and reasons for sample classification are also discussed in this paper.展开更多
This study presents the effect of excavator model, loading operation location, shift availability and truck-shovel combination on loading cycle time and productivity of an open-pit mine. The loading cycle time was use...This study presents the effect of excavator model, loading operation location, shift availability and truck-shovel combination on loading cycle time and productivity of an open-pit mine. The loading cycle time was used to assess the material loading system performance which is one of the key components of the total cycle time for material transportation in an open-pit mine. Loading is among the components of cycle time during which material is being handled. The data analyzed?was?collected from a computerized dispatch system at GGM from which 62,000 loading dispatches per month involving several shifts, 14 excavators and 49 trucks were loaded. About 4465 dispatches per excavator and 1276 dispatches per truck were assessed using loading cycle time data for each dispatch for a period of four months (between August and December). Under fixed tonnage loaded and waste type (33 t of non-acid forming waste rock),?it was observed that loading cycle time depends on excavator model, location and truck being loaded. Average cycle times, PDFS?and CDFS of loading cycle time series were used to identify differences in performance under different situations. It was concluded that shift availability for excavators, loading location, excavator model and truck-shovel combinations strongly affect the productivity during loading process in an open-pit mine.展开更多
In this paper, the performance of a waste rock transportation process in an open pit mine was assessed by using cycle time data. A computerized truck-excavator dispatch system was used to record the cycle times. The p...In this paper, the performance of a waste rock transportation process in an open pit mine was assessed by using cycle time data. A computerized truck-excavator dispatch system was used to record the cycle times. The process was broken into seven steps (or components of the total cycle), durations of which were recorded for a period of 1 month, leading to N = 60,690 data points or dispatches. The open pit mine studied consisted of 12 waste types loaded by 14 excavators and hauled by 49 trucks (at a trucks-to-excavator ratio of 3.5:1) in 75 changing locations. The string-type data was coded using integers to allow a FORTRAN code to extract process performance parameters using statistical analysis. The study established a wide range of parameters including: the waste material generation rate (about 1.73 million t/month, 81% comprising waste rock), truck fill factor, f, total cycle time (Tct), production capacity, theoretical cycle time, non-productive cycle time Tnp, and cycle time performance ratio (CTPR), denoted as Tpr. The factors affecting the process performance include: truck model, excavator model, location (haul distance and road conditions) and material type. For a fixed material type and tonnage, the PDFs of the cycle time components were logarithmic in nature, capable of differentiating performance variations under different factors. It was concluded that the performance of the waste material transportation system in this mine was determined to be acceptable due to mean value of Tpr = 2.432 being closer to unity. Reduction measures were suggested to minimize the cycle time for the process bottlenecks determined from Pareto analysis (that is, full haul, empty haul and loading processes).展开更多
The Nesterov accelerated dynamical approach serves as an essential tool for addressing convex optimization problems with accelerated convergence rates.Most previous studies in this field have primarily concentrated on...The Nesterov accelerated dynamical approach serves as an essential tool for addressing convex optimization problems with accelerated convergence rates.Most previous studies in this field have primarily concentrated on unconstrained smooth con-vex optimization problems.In this paper,on the basis of primal-dual dynamical approach,Nesterov accelerated dynamical approach,projection operator and directional gradient,we present two accelerated primal-dual projection neurodynamic approaches with time scaling to address convex optimization problems with smooth and nonsmooth objective functions subject to linear and set constraints,which consist of a second-order ODE(ordinary differential equation)or differential conclusion system for the primal variables and a first-order ODE for the dual vari-ables.By satisfying specific conditions for time scaling,we demonstrate that the proposed approaches have a faster conver-gence rate.This only requires assuming convexity of the objective function.We validate the effectiveness of our proposed two accel-erated primal-dual projection neurodynamic approaches through numerical experiments.展开更多
We investigated the effects of heating rate on the process parameters of superplastic forming for Zr55Cu30Al10Ni5 by differential scanning calorimetry. The continuous heating and isothermal annealing analyses suggeste...We investigated the effects of heating rate on the process parameters of superplastic forming for Zr55Cu30Al10Ni5 by differential scanning calorimetry. The continuous heating and isothermal annealing analyses suggested that the temperatures of glass transition and onset crystallization are heating rate-dependent in the supercooled liquid region. Then, the time-temperature-transformation diagram under different heating rates indicates that increasing the heating rate can lead to an increase of the incubation time at the same anneal temperature in the supercooled liquid region. Based on the Arrhenius relationship, we discovered that the incubation time increases by 1.08-1.11 times with double increase of the heating rate at the same anneal temperature, and then verified it by the data of literatures and the experimental results. The obtained curve of the max available incubation time reveals that the incubation time at a certain anneal temperature in the supercooled liquid region is not infinite, and will increase with increasing heating rate until this temperature shifts out of the supercooled liquid region because of exceeding critical heating rate. It is concluded that heating rate must be an important processing parameter of superplastic forming for Zr55Cu30Al10Ni5.展开更多
This paper discusses the problem of finite-time stability with respect to a closed, but not necessarily compact, invariant set for a class of nonlinear systems with discontinuous right-hand sides in the sense of the F...This paper discusses the problem of finite-time stability with respect to a closed, but not necessarily compact, invariant set for a class of nonlinear systems with discontinuous right-hand sides in the sense of the Filippov solutions. When the Lyapunov function is Lipschitz continuous and regular, the Lyapunov theorem on finite-time stability with respect to a closed invariant set is presented.展开更多
Escape time algorithm is an effective theoretical algorithm of constructing fractal graphics. The key of this algorithm lies in the construction of escape time function. A new escape time function is presented based o...Escape time algorithm is an effective theoretical algorithm of constructing fractal graphics. The key of this algorithm lies in the construction of escape time function. A new escape time function is presented based on the research of escape time algorithm. An accelerated escape time algorithm is carried out in this paper. The experiments have demonstrated that the new algorithm is not only as precise as the old, but also faster when it is used to construct Julia set.展开更多
The Jinshan gold deposit is located in the Northeast Jiangxi province,South China,which related to the ductile shear zone.It contains two ore types,i.e.the alteration-type ore and the goldbearing quartz vein ore.Rb-Sr...The Jinshan gold deposit is located in the Northeast Jiangxi province,South China,which related to the ductile shear zone.It contains two ore types,i.e.the alteration-type ore and the goldbearing quartz vein ore.Rb-Sr age dating is applied to both gold-bearing pyrite in the alteration-type ore and fluid inclusion in the gold-bearing quartz vein to make clear the time of the gold mineralization of the Jinshan deposit.Analytical results of this study yielded that the age of the alteration-type ore bodies is about 838±110Ma,with an initial 87Sr/86Sr value of 0.7045±0.0020.However,the age of the gold-bearing quartz vein-type ore is about 379±49Ma,and the initial 87Sr/86Sr is 0.7138±0.0011.Based on the age data from this work and many previous studies,the authors consider that the Jinshan gold deposit is a product of multi-staged mineralization,which may include the Jinninian,Caledonian,Hercynian,and Yanshanian Periods.Among them,the Jinninian Period and the Hercynian Period might be the two most important ore-forming periods for Jinshan deposit.The Jinninian Period is the main stage for the formation of alteration-type ore bodies,while the Hercynian Period is the major time for ore bodies of gold-bearing quartz vein type.The initial values of the 87Sr/86Sr from this study,as well as the previous isotope and trace element studies,indicate that the ore-forming materials mainly derived from the metamorphic wall rocks,and the ore-forming fluids mainly originated from the deep metamorphic water.展开更多
The organization of the compartment of mesenchymal stem cells is still obscure. Two types of human stromal precursor cells are known. Both of them are analyzed in in vitro system: mesenchymal multipotent stromal cells...The organization of the compartment of mesenchymal stem cells is still obscure. Two types of human stromal precursor cells are known. Both of them are analyzed in in vitro system: mesenchymal multipotent stromal cells (MMSC) and fibroblast colony forming units (CFU-F). The aim of this study was to compare the main characteristics of MMSC and CFU-F derived from the bone marrow of 24 healthy donors. Growth and differentiation parameters, as well as relative expression levels of different genes were analyzed in MMSC and CFU-F. MMSC were cultivated for 5 passages. CFU-F concentration was determined for each bone marrow sample. The data obtained demonstrated the heterogeneity and hierarchical organization of both studied populations of stromal precursor cells-MMSC and CFU-F. These two types of stromal precursor cells turned to be different in most parameters studied. Altogether MMSC seemed to be more immature cells than CFU-F and took up the higher position in hierarchical tree of mesenchymal stem cells. The rate of differentiation and proliferative potential decreased with the donor’s age in both populations MMSC and CFU-F.展开更多
In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, w...In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, were used to calculate the wave height transformation and the mean water level change around a submerged breakwater. The numerical solution is verified with experimental data. The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall. In contrast to cases without a seawall, the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall. Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater. We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up.展开更多
基金Funded by the National Natural Science Foundation of China(No.52370128)the Fundamental Research Funds for the Central Universities(No.2572022AW54)。
文摘This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setting time of polyurethane was further investigated using molecular dynamics simulations.Fourier transform infrared spectroscopy was also employed to systematically study the physical and chemical interactions between phosphate esters and polyurethane materials.The results demonstrate that a 1%concentration of phosphate ester provides the most effective retarding effect with minimal impact on the strength of polyurethane.When phosphate ester is added to the B component of the two-component polyurethane system,its interaction energy with component A decreases,as do the diffusion coefficient and aggregation degree of component B on the surface of component A.This reduction in interaction slows the setting time.Additionally,the addition of phosphate ester to polyurethane leads to the disappearance or weakening of functional groups,indicating competitive interactions within the phosphate ester components that inhibit the reaction rate.
基金Supported by National Key Technology R&D Program(No.2011BAG03B03)
文摘The three dimensional variable cross-section roll forming is a kind of new metal forming technol- ogy which combines large forming force, multi-axis linkage movement and space synergic movement, and the sequential synergic movement of the ganged roller group is used to complete the metal sheet forming according to the shape of the complicated and variable forming part data. The control system should meet the demands of quick response to the test requirements of the product part. A new kind of real time data driving multi-axis linkage and synergic movement control strategy of 3D roll forming is put forward in the paper. In the new control strategy, the forming data are automatically generated according to the shape of the parts, and the multi-axis linkage movement together with cooperative motion among the six stands of the 3D roll forming machine is driven by the real-time information, and the control nodes are also driven by the forming data. The new control strategy is applied to a 48 axis 3D roll forming machine developed by our research center, and the control servo period is less than 10ms. A forming experiment of variable cross section part is carried out, and the forming preci- sion is better than ＋ 0.5mm by the control strategy. The result of the experiment proves that the control strategy has significant potentiality for the development of 3D roll forming production line with large scale, multi-axis ganged and svner^ic movement
基金Supported by the National Natural Science Foundation of Chin（No. 60302020）.
文摘A convolutional weighting （CW） scheme applied to a half-wavelength spacing array was proposed for multi-user system to joint STBC （space time block ceding） and beam forming （BF）. The transmitting beam is equivalent to the product of two sub-beams. One is used to realize interference suppression, while the other is employed to form a couple of uncorrelated channels from base station （BS） to the desited user （to meet the requirement of STBC） and to maximize SINR （signal-to-interference-plus noise ratio） at the desired receiver. As an optimum combination of STBC and beam forming, the proposed scheme can achieve both full diversity order of STBC and array gain of BF. Meanwhile, it can also effec- tively restrain multi-user interference by nulling. Simulation results show that the proposed scheme can significantly improve the BER （Bit Error Rate） performance and enhance system capacity as compared with the conventional eigen-beamforming （EBF） technique applied to a half-wavelength spacing array.
基金supported by the National Natural Science Foundation of China(62403296,62303292,62173218).
文摘Dear Editor,This letter investigates the grid-forming control for power converters.Recently,grid-forming control based on matching of synchronous machines was suggested by using continuous measurements.In the present letter,we suggest a digital implementation using artificial delays where the controller employs the discrete-time measurements only.
基金financially supported by the National Natural Science Foundation of China (Nos. 51890871, 91833306, and 51573185)the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB12020300)
文摘For poly(9,9-dioctylfluorene)(PFO),β phase (coplanar conformation with the intra-chain torsion angle of 165°) has a greater conjugation length and higher degree of order compared to those of α phase, which favors charge carrier transport. However, the highest content of β phase obtained so far is 45%. We propose to increase the content of β phase by promoting the solution aggregation of PFO molecules and extending film-forming time. For this purpose, 1,8-diiodooctane (DIO) is added to PFO o-xylene solution, which enhances the interaction of PFO chains and improves the planarity of PFO backbone, resulting in the formation of ordered aggregation. The aggregates act as nucleation centers to promote the formation of β phase. The content of β phase increases with increasing DIO concentration and reaches a platform of 39% as DIO is more than 4 vol%. Furthermore, the film is kept in a sealed environment with oxylene atmosphere for 3 h, thus the PFO molecules have enough time to diffuse to the crystallization front and achieve disorder-order transition. As a result, the crystallinity of PFO is improved significantly and the content of β phase increases to 52%, reaching the highest value reported so far.
基金supported by the National Natural Science Foundation of China(12471416,12171124,12301567)the Heilongjiang Provincial Natural Science Foundation of China(PL2024F015)+2 种基金the Postdoctoral Science Foundation of Heilongjiang Province of China(LBH-Z22199)the Fundamental Research Foun-dation for Universities of Heilongjiang Province of China(2022-KYYWF-0141)the Alexander von Humboldt Foundation of Germany.
文摘Dear Editor,This letter deals with the distributed recursive set-membership filtering(DRSMF)issue for state-saturated systems under encryption-decryption mechanism.To guarantee the data security,the encryption-decryption mechanism is considered in the signal transmission process.Specifically,a novel DRSMF scheme is developed such that,for both state saturation and encryption-decryption mechanism,the filtering error(FE)is limited to the ellipsoid domain.Then,the filtering error constraint matrix(FECM)is computed and a desirable filter gain is derived by minimizing the FECM.Besides,the bound-edness evaluation of the FECM is provided.
文摘Geopolymer materials today represent innovative products,used frequently as a substitute for cementitious traditional materials.They are obtained by the action of an alkaline activation solution(composed of mainly of silicon dioxide(SiO2)and sodium hydroxide(NaOH)and water)on a powder natural or synthetic aluminosilicates.In this work,we seek to highlight the effect of the percentage of sodium dioxide firstly,on the evolution of the viscosity of the alkali-activated solution and secondly,on the evolution of the viscosity of geopolymeric solution.Another aspect of this work is the determination of the effect of this percentage on the kinetics that characterize the start of the percolation phenomenon(transition from the fresh state to the hardened state).At last result concerns the impact of temperature on this transition.This contribution consolidates the control protocols for the formulation of geopolymers and allows the optimization of the processes of their exploitation.
文摘A non-incremental time-space algorithm is proposed for numerical. analysis of forming process with the inclusion of geometrical, material, contact-frictional nonlinearities. Unlike the widely used Newton-Raphson counterpart, the present scheme features an iterative solution procedure on entire time and space domain. Validity and feasibility of foe present scheme are further justiced by the numerical investigation herewith presented.
基金This work is supported by King Mongkut’s Institute of Technology Ladkrabang(Grant No.2563-02-01-014).
文摘The bio-clogging using bacteria can be an eco-friendly and sustainable alternative to conventional grouting methods for seepage control.However,it remains unclear to date how the dilute concentration of bacterium and medium during field installation can affect the setting time of bacterium and its correlation with permeability reduction.In this study,the setting time of bacterium and its effectiveness in permeability reduction were addressed through experimental and theoretical investigations.A series of sand column was cultivated using different concentrations of Leuconostoc mesenteroides and culture medium.The distribution and composition of the bacterial product(i.e.dextran)were observed by refractometer,scanning electron microscope(SEM),and energy dispersive X-ray spectroscopy(EDS).Soil permeability was recorded using a constant head test.The results revealed that bacterium was effective to produce dextran at the setting time of about 5 d after installation.This dextran can reduce the permeability of bio-mediated soil by two orders of magnitude,even without culture medium supply.In general,the dextran production decreased proportionally with increase of bacterium and medium concentration.However,at 50%bacterium and medium concentration by weight,it still has a significant influence on permeability reduction with similar setting time,compared to 100%concentration.
基金supported by National Natural Science Foundation of China (10871133,11071246 and 11101143)Fundamental Research Funds of the Central Universities (09QL48)
文摘We use Hopf-Lax formula to study local regularity of solution to Hamilton- Jacobi （HJ） equations of multi-dimensional space variables with convex Hamiltonian. Then we give the large time generic form of the solution to HJ equation, i.e. for most initial data there exists a constant T 〉 0, which depends only on the Hamiltonian and initial datum, for t 〉 T the solution of the IVP （1.1） is smooth except for ~ smooth n-dimensional hypersurface, across which Du（x, t） is discontinuous. And we show that the hypersurface 1 tends asymptotically to a given hypersurface with rate t-1/4.
基金Funded by Guangxi Science Foundation(No. 0639006)
文摘In order to veritably measure the first peak of hydration heat evolution that has been illustrated important in indicating cement behavior in early hydration, an improved way of water addition into cement in isothermally calorimetric experiment is put forward. The experimental results indicated that: the magnitude of first peak of heat evolution varies from sample to sample, correlation between heat evolution during first peak of heat evolution and initial (as well as final) setting time is unsatisfactory when samples are not classified; while groups of sample classified based on strength grade represent satisfactory correlations, which indicating the existence of close relation between hydration heat evolution in much earlier hydration age and setting property of cement in rather later age. Importance of first peak in hydration heat evolution for understanding cement setting property and reasons for sample classification are also discussed in this paper.
文摘This study presents the effect of excavator model, loading operation location, shift availability and truck-shovel combination on loading cycle time and productivity of an open-pit mine. The loading cycle time was used to assess the material loading system performance which is one of the key components of the total cycle time for material transportation in an open-pit mine. Loading is among the components of cycle time during which material is being handled. The data analyzed?was?collected from a computerized dispatch system at GGM from which 62,000 loading dispatches per month involving several shifts, 14 excavators and 49 trucks were loaded. About 4465 dispatches per excavator and 1276 dispatches per truck were assessed using loading cycle time data for each dispatch for a period of four months (between August and December). Under fixed tonnage loaded and waste type (33 t of non-acid forming waste rock),?it was observed that loading cycle time depends on excavator model, location and truck being loaded. Average cycle times, PDFS?and CDFS of loading cycle time series were used to identify differences in performance under different situations. It was concluded that shift availability for excavators, loading location, excavator model and truck-shovel combinations strongly affect the productivity during loading process in an open-pit mine.
文摘In this paper, the performance of a waste rock transportation process in an open pit mine was assessed by using cycle time data. A computerized truck-excavator dispatch system was used to record the cycle times. The process was broken into seven steps (or components of the total cycle), durations of which were recorded for a period of 1 month, leading to N = 60,690 data points or dispatches. The open pit mine studied consisted of 12 waste types loaded by 14 excavators and hauled by 49 trucks (at a trucks-to-excavator ratio of 3.5:1) in 75 changing locations. The string-type data was coded using integers to allow a FORTRAN code to extract process performance parameters using statistical analysis. The study established a wide range of parameters including: the waste material generation rate (about 1.73 million t/month, 81% comprising waste rock), truck fill factor, f, total cycle time (Tct), production capacity, theoretical cycle time, non-productive cycle time Tnp, and cycle time performance ratio (CTPR), denoted as Tpr. The factors affecting the process performance include: truck model, excavator model, location (haul distance and road conditions) and material type. For a fixed material type and tonnage, the PDFs of the cycle time components were logarithmic in nature, capable of differentiating performance variations under different factors. It was concluded that the performance of the waste material transportation system in this mine was determined to be acceptable due to mean value of Tpr = 2.432 being closer to unity. Reduction measures were suggested to minimize the cycle time for the process bottlenecks determined from Pareto analysis (that is, full haul, empty haul and loading processes).
基金supported by the National Natural Science Foundation of China(62176218,62176027)the Fundamental Research Funds for the Central Universities(XDJK2020TY003)the Funds for Chongqing Talent Plan(cstc2024ycjh-bgzxm0082)。
文摘The Nesterov accelerated dynamical approach serves as an essential tool for addressing convex optimization problems with accelerated convergence rates.Most previous studies in this field have primarily concentrated on unconstrained smooth con-vex optimization problems.In this paper,on the basis of primal-dual dynamical approach,Nesterov accelerated dynamical approach,projection operator and directional gradient,we present two accelerated primal-dual projection neurodynamic approaches with time scaling to address convex optimization problems with smooth and nonsmooth objective functions subject to linear and set constraints,which consist of a second-order ODE(ordinary differential equation)or differential conclusion system for the primal variables and a first-order ODE for the dual vari-ables.By satisfying specific conditions for time scaling,we demonstrate that the proposed approaches have a faster conver-gence rate.This only requires assuming convexity of the objective function.We validate the effectiveness of our proposed two accel-erated primal-dual projection neurodynamic approaches through numerical experiments.
基金Funded by the National Natural Science Foundation of China(Nos.51175210 and 51175211)
文摘We investigated the effects of heating rate on the process parameters of superplastic forming for Zr55Cu30Al10Ni5 by differential scanning calorimetry. The continuous heating and isothermal annealing analyses suggested that the temperatures of glass transition and onset crystallization are heating rate-dependent in the supercooled liquid region. Then, the time-temperature-transformation diagram under different heating rates indicates that increasing the heating rate can lead to an increase of the incubation time at the same anneal temperature in the supercooled liquid region. Based on the Arrhenius relationship, we discovered that the incubation time increases by 1.08-1.11 times with double increase of the heating rate at the same anneal temperature, and then verified it by the data of literatures and the experimental results. The obtained curve of the max available incubation time reveals that the incubation time at a certain anneal temperature in the supercooled liquid region is not infinite, and will increase with increasing heating rate until this temperature shifts out of the supercooled liquid region because of exceeding critical heating rate. It is concluded that heating rate must be an important processing parameter of superplastic forming for Zr55Cu30Al10Ni5.
基金supported by the Mathematical Tianyuan Foundation (No. 10826078)the National Natural Science Foundation of China (No. 60874006)
文摘This paper discusses the problem of finite-time stability with respect to a closed, but not necessarily compact, invariant set for a class of nonlinear systems with discontinuous right-hand sides in the sense of the Filippov solutions. When the Lyapunov function is Lipschitz continuous and regular, the Lyapunov theorem on finite-time stability with respect to a closed invariant set is presented.
文摘Escape time algorithm is an effective theoretical algorithm of constructing fractal graphics. The key of this algorithm lies in the construction of escape time function. A new escape time function is presented based on the research of escape time algorithm. An accelerated escape time algorithm is carried out in this paper. The experiments have demonstrated that the new algorithm is not only as precise as the old, but also faster when it is used to construct Julia set.
基金supported by the National Natural Science Foundation of China (No. 41202083, 40373025)the Research Award Fund for Outstanding Middle-aged and Young Scientist of Shandong Province (BS2013HZ024)
文摘The Jinshan gold deposit is located in the Northeast Jiangxi province,South China,which related to the ductile shear zone.It contains two ore types,i.e.the alteration-type ore and the goldbearing quartz vein ore.Rb-Sr age dating is applied to both gold-bearing pyrite in the alteration-type ore and fluid inclusion in the gold-bearing quartz vein to make clear the time of the gold mineralization of the Jinshan deposit.Analytical results of this study yielded that the age of the alteration-type ore bodies is about 838±110Ma,with an initial 87Sr/86Sr value of 0.7045±0.0020.However,the age of the gold-bearing quartz vein-type ore is about 379±49Ma,and the initial 87Sr/86Sr is 0.7138±0.0011.Based on the age data from this work and many previous studies,the authors consider that the Jinshan gold deposit is a product of multi-staged mineralization,which may include the Jinninian,Caledonian,Hercynian,and Yanshanian Periods.Among them,the Jinninian Period and the Hercynian Period might be the two most important ore-forming periods for Jinshan deposit.The Jinninian Period is the main stage for the formation of alteration-type ore bodies,while the Hercynian Period is the major time for ore bodies of gold-bearing quartz vein type.The initial values of the 87Sr/86Sr from this study,as well as the previous isotope and trace element studies,indicate that the ore-forming materials mainly derived from the metamorphic wall rocks,and the ore-forming fluids mainly originated from the deep metamorphic water.
文摘The organization of the compartment of mesenchymal stem cells is still obscure. Two types of human stromal precursor cells are known. Both of them are analyzed in in vitro system: mesenchymal multipotent stromal cells (MMSC) and fibroblast colony forming units (CFU-F). The aim of this study was to compare the main characteristics of MMSC and CFU-F derived from the bone marrow of 24 healthy donors. Growth and differentiation parameters, as well as relative expression levels of different genes were analyzed in MMSC and CFU-F. MMSC were cultivated for 5 passages. CFU-F concentration was determined for each bone marrow sample. The data obtained demonstrated the heterogeneity and hierarchical organization of both studied populations of stromal precursor cells-MMSC and CFU-F. These two types of stromal precursor cells turned to be different in most parameters studied. Altogether MMSC seemed to be more immature cells than CFU-F and took up the higher position in hierarchical tree of mesenchymal stem cells. The rate of differentiation and proliferative potential decreased with the donor’s age in both populations MMSC and CFU-F.
基金supported by The Science Council of Taiwan under Grant No. 95-2221-E-005-154
文摘In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, were used to calculate the wave height transformation and the mean water level change around a submerged breakwater. The numerical solution is verified with experimental data. The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall. In contrast to cases without a seawall, the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall. Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater. We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up.
