This study presents a comprehensive evaluation of tropical cyclone(TC)forecast performance in the western North Pacific from 2013 to 2022,based on operational forecasts issued by the China Meteorological Administratio...This study presents a comprehensive evaluation of tropical cyclone(TC)forecast performance in the western North Pacific from 2013 to 2022,based on operational forecasts issued by the China Meteorological Administration.The analysis reveals systematic improvements in both track and intensity forecasts over the decade,with distinct error characteristics observed across various forecast parameters.Track forecast errors have steadily decreased,particularly for longer lead times,while error magnitudes have increased with longer forecast lead times.Intensity forecasts show similar progressive enhancements,with maximum sustained wind speed errors decreasing by 0.26 m/s per year for 120 h forecasts.The study also identifies several key patterns in forecast performance:typhoon-grade or stronger TCs exhibit smaller track errors than week or weaker systems;intensity forecasts systematically overestimate weaker TCs while underestimating stronger systems;and spatial error distributions show greater track inaccuracies near landmasses and regional intensity biases.These findings highlight both the significant advances in TC forecasting capability achieved through improved modeling and observational systems,and the remaining challenges in predicting TC changes and landfall behavior,providing valuable benchmarks for future forecast system development.展开更多
AIM:To evaluate the efficacy of the total computer vision syndrome questionnaire(CVS-Q)score as a predictive tool for identifying individuals with symptomatic binocular vision anomalies and refractive errors.METHODS:A...AIM:To evaluate the efficacy of the total computer vision syndrome questionnaire(CVS-Q)score as a predictive tool for identifying individuals with symptomatic binocular vision anomalies and refractive errors.METHODS:A total of 141 healthy computer users underwent comprehensive clinical visual function assessments,including evaluations of refractive errors,accommodation(amplitude of accommodation,positive relative accommodation,negative relative accommodation,accommodative accuracy,and accommodative facility),and vergence(phoria,positive and negative fusional vergence,near point of convergence,and vergence facility).Total CVS-Q scores were recorded to explore potential associations between symptom scores and the aforementioned clinical visual function parameters.RESULTS:The cohort included 54 males(38.3%)with a mean age of 23.9±0.58y and 87 age-matched females(61.7%)with a mean age of 23.9±0.53y.The multiple regression model was statistically significant[R²=0.60,F=13.28,degrees of freedom(DF=17122,P<0.001].This indicates that 60%of the variance in total CVS-Q scores(reflecting reported symptoms)could be explained by four clinical measurements:amplitude of accommodation,positive relative accommodation,exophoria at distance and near,and positive fusional vergence at near.CONCLUSION:The total CVS-Q score is a valid and reliable tool for predicting the presence of various nonstrabismic binocular vision anomalies and refractive errors in symptomatic computer users.展开更多
Inborn errors of metabolism(IEM)are rare disorders,most are liver-based with liver transplantation(LT)emerging as an effective cure in the pediatric population.LT has been shown to offer a cure or deter disease progre...Inborn errors of metabolism(IEM)are rare disorders,most are liver-based with liver transplantation(LT)emerging as an effective cure in the pediatric population.LT has been shown to offer a cure or deter disease progression and provide symptomatic improvement in patients with IEM.Each metabolic disorder is unique,with the missing enzyme or transporter protein causing substrate deficiency or toxic byproduct production.Knowledge about the distribution of deficient enzymes,the percentage of enzymes replaced by LT,and the extent of extrahepatic involvement helps anticipate and manage complications in the perioperative period.Most patients have multisystem involvement and can be on complex dietary regimens.Metabolic decompensation can be triggered due to the stress response to surgery,fasting and other unanticipated complications perioperatively.Thus,a multidisciplinary team’s input including those from metabolic specialists is essential to develop disease and patient-specific strategies for the perioperative management of these patients during LT.In this review,we outline the classification of IEM,indications for LT along with potential benefits,basic metabolic defects and their implications,details of extrahepatic involvement and perioperative management strategies for LT in children with some of the commonly presenting IEM,to assist anesthesiologists handling this cohort of patients.展开更多
Industrial robots are integral to modern manufacturing systems,enabling high precision,high throughput,and flexibility.However,errors in accuracy and repeatability,which arise from a variety of sources such as mechani...Industrial robots are integral to modern manufacturing systems,enabling high precision,high throughput,and flexibility.However,errors in accuracy and repeatability,which arise from a variety of sources such as mechanical wear,calibration issues,and environmental factors,can significantly impact the performance of industrial robots.This paper aims to explore the theoretical modeling of errors in industrial robot systems and propose compensation strategies to enhance their accuracy and repeatability.Key factors contributing to errors,such as kinematic,dynamic,and environmental influences,are discussed in detail.Additionally,the paper explores various compensation techniques,including geometric error compensation,dynamic compensation,and adaptive control approaches.Through the integration of error modeling and compensation methods,industrial robots can achieve improved performance,ensuring higher operational efficiency and product quality.The paper concludes by highlighting the challenges and future research directions for improving the accuracy and repeatability of industrial robots in practical applications.展开更多
The fragility and stochastic behavior of quantum sources make it crucial to witness the topology of quantum networks.Most previous theoretical methods are based on perfect assumptions of quantum measurements.In this w...The fragility and stochastic behavior of quantum sources make it crucial to witness the topology of quantum networks.Most previous theoretical methods are based on perfect assumptions of quantum measurements.In this work,we propose a method to witness network topology under imperfect assumptions of quantum measurements.We show that the discrimination between star and triangle networks depends on the specific error tolerances of local measurements.This extends recent results for witnessing the triangle network[Phys.Rev.Lett.132240801(2024)].展开更多
Null compensation interferometry is the primary testing method for the manufacture of ultra-high-precision aspheric mirrors.The crosstalk fringes generated by stray light in interferometry can affect accuracy and pote...Null compensation interferometry is the primary testing method for the manufacture of ultra-high-precision aspheric mirrors.The crosstalk fringes generated by stray light in interferometry can affect accuracy and potentially prevent the testing from proceeding normally.Position errors include the decenter error,tilt error,and distance error.During the testing process,position errors will impact the testing accuracy and the crosstalk fringes generated by stray light.To determine the specific impact of position errors,we use the concept of Hindle shell testing of a convex aspheric mirror,and propose the simulation method of crosstalk fringes in null compensation interferometry.We also propose evaluation indices of crosstalk fringes in interferometry and simulate the influence of position errors on the crosstalk fringes.This work aims to help improve the design of compensation interferometry schemes,enhance the feasibility of the design,reduce engineering risks,and improve efficiency.展开更多
AIM:To evaluate the effects of refractive errors and binocular vision anomalies on the quality of life(QOL)of university students.METHODS:This cross-sectional analytical study was conducted on university students usin...AIM:To evaluate the effects of refractive errors and binocular vision anomalies on the quality of life(QOL)of university students.METHODS:This cross-sectional analytical study was conducted on university students using simple random sampling.Objective refraction,ocular alignment,vergence and accommodative performance were measured and assessed in all participants.Data on QOL were collected using the College of Optometrists in Vision Development-Quality of Life(COVD-QOL)Questionnaire.The effect of mentioned parameters on the QOL were evaluated.RESULTS:Totally 726 students with mean age of 21.35±1.88y were evaluated in this study,51.5%of whom were female.Esophoria was caused significantly lower QOL in the domains of somatic symptoms and occupationalphysical symptoms(P<0.05);Besides,esotropia decreased QOL in domains of somatic symptoms P=0.002 and psychological factors(P=0.023).Students with accommodation insufficiency experienced more symptoms in all domains(P<0.05)except for psychological factors(P=0.07).Increasing in the near point of convergence and accommodation and decreases QOL and increasing accommodative facility increases QOL(all P<0.05).Myopia and astigmatism cause decrease in QOL(both P<0.05),but hyperopic students had better QOL in comparison with others(P<0.05).CONCLUSION:Screening programs and treatment of refractive errors and binocular vision anomalies,especially phoria and accommodative insufficiency,positively impact the QOL and academic achievements of university students.展开更多
Gear assembly errors can lead to the increase of vibration and noise of the system,which affect the stability of system.The influence can be compensated by tooth modification.Firstly,an improved three-dimensional load...Gear assembly errors can lead to the increase of vibration and noise of the system,which affect the stability of system.The influence can be compensated by tooth modification.Firstly,an improved three-dimensional loaded tooth contact analysis(3D-LTCA)method which can consider tooth modification and coupling assembly errors is proposed,and mesh stiffness calculated by proposed method is verified by MASTA software.Secondly,based on neural network,the surrogate model(SM)that maps the relationship between modification parameters and mesh mechanical parameters is established,and its accuracy is verified.Finally,SM is introduced to establish an optimization model with the target of minimizing mesh stiffness variations and obtaining more even load distribution on mesh surface.The results show that even considering training time,the efficiency of gear pair optimization by surrogate model is still much higher than that by LTCA method.After optimization,the mesh stiffness fluctuation of gear pair with coupling assembly error is reduced by 34.10%,and difference in average contact stresses between left and right regions of the mesh surface is reduced by 62.84%.展开更多
Recently,the NGPON2 standards organization has decided to deploy LDPC code in upstream and downstream channels in next-generation Ethernet passive optical network(NG-EPON)systems.However,PON upstream channels operate ...Recently,the NGPON2 standards organization has decided to deploy LDPC code in upstream and downstream channels in next-generation Ethernet passive optical network(NG-EPON)systems.However,PON upstream channels operate in burst-mode,hence the turn-on effects in optical network units(ONUs)may introduce burst errors,which are difficult for LDPC to deal with.One of the solutions is introducing an interleaver to convert consecutive burst errors into separate random errors.The traditional interleavers such as the block interleaver and the random interleaver,only consider dispersing the consecutive errors.In this paper,we present a design methodology for channel-adaptive interleaving pattern by joint optimizing of interleaving and LDPC decoding in PON systems deploying LDPC codes.After determining the interleaving pattern where the bits can be recovered with more reliable messages during LDPC iterative decoding,we map the bits from the potential locations of burst errors to the interleaving positions.By doing so,we can not only disperse the burst errors but also make full use of the LDPC code to improve its decoding performance.The numerical results show that the proposed interleaving scheme has a better performance under any burst-error length.展开更多
To address the significant degradation of Space-Time Adaptive Processing(STAP)performance when the array elements have mutual coupling and gain/phase errors,a STAP algorithm with adaptive calibration for the above two...To address the significant degradation of Space-Time Adaptive Processing(STAP)performance when the array elements have mutual coupling and gain/phase errors,a STAP algorithm with adaptive calibration for the above two array errors is proposed in this article.First,based on a defined error matrix that simultaneously considers both array mutual coupling and gain/phase errors,a STAP signal model including these errors is given.Then,utilizing the defined signal model,it is demonstrated that the estimation of the defined error matrix can be formulized as a standard convex optimization problem with the low-rank structure of the clutter covariance matrix and the subspace projection theory.Once the defined error matrix is estimated by solving the convex optimization problem,it is illustrated that a STAP method with adaptive calibration of the mutual coupling and gain/phase errors is coined.Analyses also show that the proposed adaptive calibration algorithm only needs one training sample to construct the adaptive weight vector.Therefore,it can achieve a good detection performance even with severe non-homogeneous clutter environments.Finally,the simulation experiments verify the effectiveness of the proposed algorithm and the correctness of the analytical results.展开更多
The integrated energy systems(IESs)offer a practical solution for achieving low-carbon targets in residential buildings.However,IES encounters several challenges related to increased energy consumption and costs due t...The integrated energy systems(IESs)offer a practical solution for achieving low-carbon targets in residential buildings.However,IES encounters several challenges related to increased energy consumption and costs due to fluctuations in renewable energy generation.Leveraging building flexibility to address these power fluctuations within IES is a promising strategy,which requires coordinated control between air-conditioning systems and other IES components.This study proposes a cross-time-scale control framework that contains optimal scheduling and on-the-fly flexible control to reduce the cost impacts of a residential IES system equipped with photovoltaic(PV)panels,batteries,a heat pump,and a domestic hot water tank.The method involves three key steps:solar irradiance prediction,day-ahead optimal scheduling of energy storage,and intra-day flexible control of the heat pump.The method is validated through a high-fidelity residential building model with actual weather and energy usage data in Frankfurt,Germany.Results reveal that the proposed method limits the cost increase to just 2.67% compared to the day-ahead schedule,whereas the cost could increase by 7.39% without the flexible control.Additionally,computational efficiency is enhanced by transforming the mixed-integer programming(MIP)into nonlinear programming(NLP)problem via introducing action-exclusive constraints.This approach offers valuable support for residential IES operations.展开更多
This study investigated the factors contributing to intravenous admixture preparation errors(IAPEs)within Pharmacy Intravenous Admixture Services(PIVAS).A retrospective analysis was conducted on IAPEs documented in th...This study investigated the factors contributing to intravenous admixture preparation errors(IAPEs)within Pharmacy Intravenous Admixture Services(PIVAS).A retrospective analysis was conducted on IAPEs documented in the PIVAS unit of a large multi-specialty hospital in China,which houses over 2000 beds,covering the period from January 1,2015 to December 31,2022.Drug preparation records were examined using a generalized linear mixed model(GLMM)to identify both univariate and multivariate factors associated with IAPE occurrences.A total of 824 IAPE cases were recorded during the study period,yielding an overall error rate of 0.018%.Univariate analysis identified drug categories(general drugs,anti-infective drugs,and antineoplastic drugs),preparation time(workdays),and years of work experience as significant determinants(P<0.05).Multivariate analysis further confirmed that drug categories(general and antineoplastic drugs),preparation time(workdays),and work experience remained statistically significant predictors of IAPE incidence(P<0.05).IAPEs in PIVAS were influenced by multiple factors,predominantly those related to personnel and drug characteristics.Targeted interventions,informed by multivariate analysis,are essential to mitigating these errors and enhancing medication safety.展开更多
Data-flow errors are prevalent in cyber-physical systems(CPS).Although various approaches based on business process modeling notation(BPMN)have been devised for CPS modeling,the absence of formal specifications compli...Data-flow errors are prevalent in cyber-physical systems(CPS).Although various approaches based on business process modeling notation(BPMN)have been devised for CPS modeling,the absence of formal specifications complicates the verification of data-flow.Formal techniques such as Petri nets are popularly used for identifying data-flow errors.However,due to their interleaving semantics,they suffer from the state-space explosion problem.As an unfolding method for Petri nets,the merged process(MP)technique can well represent concurrency relationships and thus be used to address this issue.Yet generating MP is complex and incurs substantial overhead.By designing and applyingα-deletion rules for Petri nets with data(PNDs),this work simplifies MP,thus resulting in simplified MP(SMP)that is then used to identify data-flow errors.Our approach involves converting a BPMN into a PND and then constructing its SMP.The algorithms are developed to identify data-flow errors,e.g.,redundantdata and lost-data ones.The proposed method enhances the efficiency and effectiveness of identifying data-flow errors in CPS.It is expected to prevent the problems caused by data-flow errors,e.g.,medical malpractice and economic loss in some practical CPS.Its practicality and efficiency of the proposed method through several CPS.Its significant advantages over the state of the art are demonstrated.展开更多
BACKGROUND Diagnostic errors in critical care settings are a significant challenge,often leading to adverse patient outcomes and increased healthcare costs.Millimeter-wave(mmWave)technology,with its ability to provide...BACKGROUND Diagnostic errors in critical care settings are a significant challenge,often leading to adverse patient outcomes and increased healthcare costs.Millimeter-wave(mmWave)technology,with its ability to provide high-resolution,real-time data,offers a transformative solution to enhance diagnostic accuracy and patient safety.This paper explores the integration of mmWave technology in intensive care units(ICUs)to enable non-invasive monitoring,minimize diagnostic errors,and improve clinical decision-making.By addressing key challenges,including data latency,signal interference,and implementation feasibility,this approach has the potential to revolutionize patient monitoring systems and set a new standard for critical care delivery.The paper discusses the high prevalence of diagnostic errors in medical care,particularly in primary care and ICUs,and emphasizes the need for improvement in diagnostic accuracy.Diagnostic errors are responsible for a significant number of deaths,disabilities,prolonged hospitalizations and delays in diagnosis worldwide.AIM To address this issue,the paper proposes the use of ultrafast wireless medical big data transmission in primary care,specifically in remote smart sensors monitoring devices.It suggests that wireless transmission with a speed up to 100 Gb/s(12.5 Gbytes/s)within a short distance(1-10 meters)is necessary to reduce diagnostic errors.METHODS The method used in the study,includes system design and testing a channel sounder operating at 63.4-64.4 GHz frequency range.The system demonstrated dynamic range of 70 dB,noise level of-110 dBm,and a time resolution of 1 ns.The experiment measured the impulse response of the channel in 36 locations within the primary care/ICU scenario.RESULTS The system was tested in a simulated ICU environment to evaluate the Latency:Assessing the time delay in data transmission and processing.The results of the study showed that the system met the requirements of ICUs,providing excellent latency values.The delay spread and excess delay values were within acceptable limits,indicating successful resolution of ICU requirements.The paper suggests timely deployment of such a system.Impact on data transmission:A 100 MB magnetic resonance imaging scan can be transmitted in approximately 0.008 seconds;A 1 GB scan would take approximately 0.08 seconds;This capability could revolutionize healthcare,enabling real-time remote diagnostics and comparisons with artificial Intelligence models,even in large-scale systems.CONCLUSION The experiment demonstrated the feasibility of using high-speed wireless transmission for improved diagnostics in ICUs,offering potential benefits in terms of reduced errors and improved patient outcomes.The findings are deemed valuable to the medical community and public healthcare systems,and it is suggested further research in this area.展开更多
Conventional error cancellation approaches separate molecules into smaller fragments and sum the errors of all fragments to counteract the overall computational error of the parent molecules.However,these approaches m...Conventional error cancellation approaches separate molecules into smaller fragments and sum the errors of all fragments to counteract the overall computational error of the parent molecules.However,these approaches may be ineffective for systems with strong localized chemical effects,as fragmenting specific substructures into simpler chemical bonds can introduce additional errors instead of mitigating them.To address this issue,we propose the Substructure-Preserved Connection-Based Hierarchy(SCBH),a method that automatically identifies and freezes substructures with significant local chemical effects prior to molecular fragmentation.The SCBH is validated by the gas-phase enthalpy of formation calculation of CHNO molecules.Therein,based on the atomization scheme,the reference and test values are derived at the levels of Gaussian-4(G4)and M062X/6-31+G(2df,p),respectively.Compared to commonly used approaches,SCBH reduces the average computational error by half and requires only15%of the computational cost of G4 to achieve comparable accuracy.Since different types of local effect structures have differentiated influences on gas-phase enthalpy of formation,substituents with strong electronic effects should be retained preferentially.SCBH can be readily extended to diverse classes of organic compounds.Its workflow and source code allow flexible customization of molecular moieties,including azide,carboxyl,trinitromethyl,phenyl,and others.This strategy facilitates accurate,rapid,and automated computations and corrections,making it well-suited for high-throughput molecular screening and dataset construction for gas-phase enthalpy of formation.展开更多
This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given...This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.展开更多
This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However,...This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However, it depends highly on the accuracy of model. Model errors between the virtual and real environment exist inevitably. The existing way to deal with the problem is by means of either model matching or robot compliance control. As distinct from the existing methods, this article tries to combine m...展开更多
A new instrument for checking the quality of elevator guide rails is introduced.With this instrument,the general geometric errors such as straightness,flatness,squareness,twist,thickness and height can be measured aut...A new instrument for checking the quality of elevator guide rails is introduced.With this instrument,the general geometric errors such as straightness,flatness,squareness,twist,thickness and height can be measured automatically,simultaneously in a short time with high accuracy.It is very useful for elevator guide rail factories to improve their work efficiency and the quality of their products.展开更多
The theoretical lower bounds on mean squared channel estimation errors for typical fading channels are presented by the infinite-length and non-causal Wiener filter and the exact closed-form expressions of the lower b...The theoretical lower bounds on mean squared channel estimation errors for typical fading channels are presented by the infinite-length and non-causal Wiener filter and the exact closed-form expressions of the lower bounds for different channel Doppler spectra are derived. Based on the obtained lower bounds on mean squared channel estimation errors, the limits on bit error rate （BER） for maximal ratio combining （MRC） with Gaussian distributed weighting errors on independent and identically distributed （i. i. d） fading channels are presented. Numerical results show that the BER performances of ideal MRC are the lower bounds on the BER performances of non-ideal MRC and deteriorate as the maximum Doppler frequency increases or the SNR of channel estimate decreases.展开更多
Software synchronous sampling is widely employed in periodic signal measurement, but measurement errors occur very commonly. This paper analyses the cause of the errors, deduces the mathematical model for the measure...Software synchronous sampling is widely employed in periodic signal measurement, but measurement errors occur very commonly. This paper analyses the cause of the errors, deduces the mathematical model for the measurement errors in measuring RMS voltage, RMS current and active power using the software synchronous sampling method. Some measures to reduce the errors are put forward by simulating.展开更多
基金supported by the National Key R&D Program of China [grant number 2023YFC3008004]。
文摘This study presents a comprehensive evaluation of tropical cyclone(TC)forecast performance in the western North Pacific from 2013 to 2022,based on operational forecasts issued by the China Meteorological Administration.The analysis reveals systematic improvements in both track and intensity forecasts over the decade,with distinct error characteristics observed across various forecast parameters.Track forecast errors have steadily decreased,particularly for longer lead times,while error magnitudes have increased with longer forecast lead times.Intensity forecasts show similar progressive enhancements,with maximum sustained wind speed errors decreasing by 0.26 m/s per year for 120 h forecasts.The study also identifies several key patterns in forecast performance:typhoon-grade or stronger TCs exhibit smaller track errors than week or weaker systems;intensity forecasts systematically overestimate weaker TCs while underestimating stronger systems;and spatial error distributions show greater track inaccuracies near landmasses and regional intensity biases.These findings highlight both the significant advances in TC forecasting capability achieved through improved modeling and observational systems,and the remaining challenges in predicting TC changes and landfall behavior,providing valuable benchmarks for future forecast system development.
基金Supported by Ongoing Research Funding Program(ORFFT-2025-054-1),King Saud University,Riyadh,Saudi Arabia.
文摘AIM:To evaluate the efficacy of the total computer vision syndrome questionnaire(CVS-Q)score as a predictive tool for identifying individuals with symptomatic binocular vision anomalies and refractive errors.METHODS:A total of 141 healthy computer users underwent comprehensive clinical visual function assessments,including evaluations of refractive errors,accommodation(amplitude of accommodation,positive relative accommodation,negative relative accommodation,accommodative accuracy,and accommodative facility),and vergence(phoria,positive and negative fusional vergence,near point of convergence,and vergence facility).Total CVS-Q scores were recorded to explore potential associations between symptom scores and the aforementioned clinical visual function parameters.RESULTS:The cohort included 54 males(38.3%)with a mean age of 23.9±0.58y and 87 age-matched females(61.7%)with a mean age of 23.9±0.53y.The multiple regression model was statistically significant[R²=0.60,F=13.28,degrees of freedom(DF=17122,P<0.001].This indicates that 60%of the variance in total CVS-Q scores(reflecting reported symptoms)could be explained by four clinical measurements:amplitude of accommodation,positive relative accommodation,exophoria at distance and near,and positive fusional vergence at near.CONCLUSION:The total CVS-Q score is a valid and reliable tool for predicting the presence of various nonstrabismic binocular vision anomalies and refractive errors in symptomatic computer users.
文摘Inborn errors of metabolism(IEM)are rare disorders,most are liver-based with liver transplantation(LT)emerging as an effective cure in the pediatric population.LT has been shown to offer a cure or deter disease progression and provide symptomatic improvement in patients with IEM.Each metabolic disorder is unique,with the missing enzyme or transporter protein causing substrate deficiency or toxic byproduct production.Knowledge about the distribution of deficient enzymes,the percentage of enzymes replaced by LT,and the extent of extrahepatic involvement helps anticipate and manage complications in the perioperative period.Most patients have multisystem involvement and can be on complex dietary regimens.Metabolic decompensation can be triggered due to the stress response to surgery,fasting and other unanticipated complications perioperatively.Thus,a multidisciplinary team’s input including those from metabolic specialists is essential to develop disease and patient-specific strategies for the perioperative management of these patients during LT.In this review,we outline the classification of IEM,indications for LT along with potential benefits,basic metabolic defects and their implications,details of extrahepatic involvement and perioperative management strategies for LT in children with some of the commonly presenting IEM,to assist anesthesiologists handling this cohort of patients.
文摘Industrial robots are integral to modern manufacturing systems,enabling high precision,high throughput,and flexibility.However,errors in accuracy and repeatability,which arise from a variety of sources such as mechanical wear,calibration issues,and environmental factors,can significantly impact the performance of industrial robots.This paper aims to explore the theoretical modeling of errors in industrial robot systems and propose compensation strategies to enhance their accuracy and repeatability.Key factors contributing to errors,such as kinematic,dynamic,and environmental influences,are discussed in detail.Additionally,the paper explores various compensation techniques,including geometric error compensation,dynamic compensation,and adaptive control approaches.Through the integration of error modeling and compensation methods,industrial robots can achieve improved performance,ensuring higher operational efficiency and product quality.The paper concludes by highlighting the challenges and future research directions for improving the accuracy and repeatability of industrial robots in practical applications.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12271394 and 62172341)the Sichuan Natural Science Foundation(Grant Nos.2024NSFSC1365 and 2024NSFSC1375)。
文摘The fragility and stochastic behavior of quantum sources make it crucial to witness the topology of quantum networks.Most previous theoretical methods are based on perfect assumptions of quantum measurements.In this work,we propose a method to witness network topology under imperfect assumptions of quantum measurements.We show that the discrimination between star and triangle networks depends on the specific error tolerances of local measurements.This extends recent results for witnessing the triangle network[Phys.Rev.Lett.132240801(2024)].
基金the National Key Research and Development Program of China(2022YFB3403404)the Youth Innovation Promotion Association,CAS(2022213)the National Natural Science Foundation of China(62127901 and 62305334).
文摘Null compensation interferometry is the primary testing method for the manufacture of ultra-high-precision aspheric mirrors.The crosstalk fringes generated by stray light in interferometry can affect accuracy and potentially prevent the testing from proceeding normally.Position errors include the decenter error,tilt error,and distance error.During the testing process,position errors will impact the testing accuracy and the crosstalk fringes generated by stray light.To determine the specific impact of position errors,we use the concept of Hindle shell testing of a convex aspheric mirror,and propose the simulation method of crosstalk fringes in null compensation interferometry.We also propose evaluation indices of crosstalk fringes in interferometry and simulate the influence of position errors on the crosstalk fringes.This work aims to help improve the design of compensation interferometry schemes,enhance the feasibility of the design,reduce engineering risks,and improve efficiency.
文摘AIM:To evaluate the effects of refractive errors and binocular vision anomalies on the quality of life(QOL)of university students.METHODS:This cross-sectional analytical study was conducted on university students using simple random sampling.Objective refraction,ocular alignment,vergence and accommodative performance were measured and assessed in all participants.Data on QOL were collected using the College of Optometrists in Vision Development-Quality of Life(COVD-QOL)Questionnaire.The effect of mentioned parameters on the QOL were evaluated.RESULTS:Totally 726 students with mean age of 21.35±1.88y were evaluated in this study,51.5%of whom were female.Esophoria was caused significantly lower QOL in the domains of somatic symptoms and occupationalphysical symptoms(P<0.05);Besides,esotropia decreased QOL in domains of somatic symptoms P=0.002 and psychological factors(P=0.023).Students with accommodation insufficiency experienced more symptoms in all domains(P<0.05)except for psychological factors(P=0.07).Increasing in the near point of convergence and accommodation and decreases QOL and increasing accommodative facility increases QOL(all P<0.05).Myopia and astigmatism cause decrease in QOL(both P<0.05),but hyperopic students had better QOL in comparison with others(P<0.05).CONCLUSION:Screening programs and treatment of refractive errors and binocular vision anomalies,especially phoria and accommodative insufficiency,positively impact the QOL and academic achievements of university students.
基金Project(11972112)supported by the National Natural Science Foundation of ChinaProject(N2103024)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(J2019-IV-0018-0086)supported by the National Science and Technology Major Project,China。
文摘Gear assembly errors can lead to the increase of vibration and noise of the system,which affect the stability of system.The influence can be compensated by tooth modification.Firstly,an improved three-dimensional loaded tooth contact analysis(3D-LTCA)method which can consider tooth modification and coupling assembly errors is proposed,and mesh stiffness calculated by proposed method is verified by MASTA software.Secondly,based on neural network,the surrogate model(SM)that maps the relationship between modification parameters and mesh mechanical parameters is established,and its accuracy is verified.Finally,SM is introduced to establish an optimization model with the target of minimizing mesh stiffness variations and obtaining more even load distribution on mesh surface.The results show that even considering training time,the efficiency of gear pair optimization by surrogate model is still much higher than that by LTCA method.After optimization,the mesh stiffness fluctuation of gear pair with coupling assembly error is reduced by 34.10%,and difference in average contact stresses between left and right regions of the mesh surface is reduced by 62.84%.
基金supported by National Natural Science Foundation of China(No.U21A20454).
文摘Recently,the NGPON2 standards organization has decided to deploy LDPC code in upstream and downstream channels in next-generation Ethernet passive optical network(NG-EPON)systems.However,PON upstream channels operate in burst-mode,hence the turn-on effects in optical network units(ONUs)may introduce burst errors,which are difficult for LDPC to deal with.One of the solutions is introducing an interleaver to convert consecutive burst errors into separate random errors.The traditional interleavers such as the block interleaver and the random interleaver,only consider dispersing the consecutive errors.In this paper,we present a design methodology for channel-adaptive interleaving pattern by joint optimizing of interleaving and LDPC decoding in PON systems deploying LDPC codes.After determining the interleaving pattern where the bits can be recovered with more reliable messages during LDPC iterative decoding,we map the bits from the potential locations of burst errors to the interleaving positions.By doing so,we can not only disperse the burst errors but also make full use of the LDPC code to improve its decoding performance.The numerical results show that the proposed interleaving scheme has a better performance under any burst-error length.
基金co-supported by the National Natural Science Foundation of China(No.12374431)。
文摘To address the significant degradation of Space-Time Adaptive Processing(STAP)performance when the array elements have mutual coupling and gain/phase errors,a STAP algorithm with adaptive calibration for the above two array errors is proposed in this article.First,based on a defined error matrix that simultaneously considers both array mutual coupling and gain/phase errors,a STAP signal model including these errors is given.Then,utilizing the defined signal model,it is demonstrated that the estimation of the defined error matrix can be formulized as a standard convex optimization problem with the low-rank structure of the clutter covariance matrix and the subspace projection theory.Once the defined error matrix is estimated by solving the convex optimization problem,it is illustrated that a STAP method with adaptive calibration of the mutual coupling and gain/phase errors is coined.Analyses also show that the proposed adaptive calibration algorithm only needs one training sample to construct the adaptive weight vector.Therefore,it can achieve a good detection performance even with severe non-homogeneous clutter environments.Finally,the simulation experiments verify the effectiveness of the proposed algorithm and the correctness of the analytical results.
基金supported by the National Key Research and Development Program of China(2022YFB4200902)。
文摘The integrated energy systems(IESs)offer a practical solution for achieving low-carbon targets in residential buildings.However,IES encounters several challenges related to increased energy consumption and costs due to fluctuations in renewable energy generation.Leveraging building flexibility to address these power fluctuations within IES is a promising strategy,which requires coordinated control between air-conditioning systems and other IES components.This study proposes a cross-time-scale control framework that contains optimal scheduling and on-the-fly flexible control to reduce the cost impacts of a residential IES system equipped with photovoltaic(PV)panels,batteries,a heat pump,and a domestic hot water tank.The method involves three key steps:solar irradiance prediction,day-ahead optimal scheduling of energy storage,and intra-day flexible control of the heat pump.The method is validated through a high-fidelity residential building model with actual weather and energy usage data in Frankfurt,Germany.Results reveal that the proposed method limits the cost increase to just 2.67% compared to the day-ahead schedule,whereas the cost could increase by 7.39% without the flexible control.Additionally,computational efficiency is enhanced by transforming the mixed-integer programming(MIP)into nonlinear programming(NLP)problem via introducing action-exclusive constraints.This approach offers valuable support for residential IES operations.
基金The National Natural Science Foundation of China(Grant No.72474013)the Beijing Health Technology Promotion Project(Grant No.BHTPP2024007)。
文摘This study investigated the factors contributing to intravenous admixture preparation errors(IAPEs)within Pharmacy Intravenous Admixture Services(PIVAS).A retrospective analysis was conducted on IAPEs documented in the PIVAS unit of a large multi-specialty hospital in China,which houses over 2000 beds,covering the period from January 1,2015 to December 31,2022.Drug preparation records were examined using a generalized linear mixed model(GLMM)to identify both univariate and multivariate factors associated with IAPE occurrences.A total of 824 IAPE cases were recorded during the study period,yielding an overall error rate of 0.018%.Univariate analysis identified drug categories(general drugs,anti-infective drugs,and antineoplastic drugs),preparation time(workdays),and years of work experience as significant determinants(P<0.05).Multivariate analysis further confirmed that drug categories(general and antineoplastic drugs),preparation time(workdays),and work experience remained statistically significant predictors of IAPE incidence(P<0.05).IAPEs in PIVAS were influenced by multiple factors,predominantly those related to personnel and drug characteristics.Targeted interventions,informed by multivariate analysis,are essential to mitigating these errors and enhancing medication safety.
基金supported by the National Natural Science Foundation of China(62402415)and in part by the Natural Science Foundation of Shandong Province of China(ZR2024MF129)in part by State Key Laboratory of Massive Personalized Customization System and Technology(No.H&C-MPC-2023-02-03).
文摘Data-flow errors are prevalent in cyber-physical systems(CPS).Although various approaches based on business process modeling notation(BPMN)have been devised for CPS modeling,the absence of formal specifications complicates the verification of data-flow.Formal techniques such as Petri nets are popularly used for identifying data-flow errors.However,due to their interleaving semantics,they suffer from the state-space explosion problem.As an unfolding method for Petri nets,the merged process(MP)technique can well represent concurrency relationships and thus be used to address this issue.Yet generating MP is complex and incurs substantial overhead.By designing and applyingα-deletion rules for Petri nets with data(PNDs),this work simplifies MP,thus resulting in simplified MP(SMP)that is then used to identify data-flow errors.Our approach involves converting a BPMN into a PND and then constructing its SMP.The algorithms are developed to identify data-flow errors,e.g.,redundantdata and lost-data ones.The proposed method enhances the efficiency and effectiveness of identifying data-flow errors in CPS.It is expected to prevent the problems caused by data-flow errors,e.g.,medical malpractice and economic loss in some practical CPS.Its practicality and efficiency of the proposed method through several CPS.Its significant advantages over the state of the art are demonstrated.
文摘BACKGROUND Diagnostic errors in critical care settings are a significant challenge,often leading to adverse patient outcomes and increased healthcare costs.Millimeter-wave(mmWave)technology,with its ability to provide high-resolution,real-time data,offers a transformative solution to enhance diagnostic accuracy and patient safety.This paper explores the integration of mmWave technology in intensive care units(ICUs)to enable non-invasive monitoring,minimize diagnostic errors,and improve clinical decision-making.By addressing key challenges,including data latency,signal interference,and implementation feasibility,this approach has the potential to revolutionize patient monitoring systems and set a new standard for critical care delivery.The paper discusses the high prevalence of diagnostic errors in medical care,particularly in primary care and ICUs,and emphasizes the need for improvement in diagnostic accuracy.Diagnostic errors are responsible for a significant number of deaths,disabilities,prolonged hospitalizations and delays in diagnosis worldwide.AIM To address this issue,the paper proposes the use of ultrafast wireless medical big data transmission in primary care,specifically in remote smart sensors monitoring devices.It suggests that wireless transmission with a speed up to 100 Gb/s(12.5 Gbytes/s)within a short distance(1-10 meters)is necessary to reduce diagnostic errors.METHODS The method used in the study,includes system design and testing a channel sounder operating at 63.4-64.4 GHz frequency range.The system demonstrated dynamic range of 70 dB,noise level of-110 dBm,and a time resolution of 1 ns.The experiment measured the impulse response of the channel in 36 locations within the primary care/ICU scenario.RESULTS The system was tested in a simulated ICU environment to evaluate the Latency:Assessing the time delay in data transmission and processing.The results of the study showed that the system met the requirements of ICUs,providing excellent latency values.The delay spread and excess delay values were within acceptable limits,indicating successful resolution of ICU requirements.The paper suggests timely deployment of such a system.Impact on data transmission:A 100 MB magnetic resonance imaging scan can be transmitted in approximately 0.008 seconds;A 1 GB scan would take approximately 0.08 seconds;This capability could revolutionize healthcare,enabling real-time remote diagnostics and comparisons with artificial Intelligence models,even in large-scale systems.CONCLUSION The experiment demonstrated the feasibility of using high-speed wireless transmission for improved diagnostics in ICUs,offering potential benefits in terms of reduced errors and improved patient outcomes.The findings are deemed valuable to the medical community and public healthcare systems,and it is suggested further research in this area.
基金the support of the National Natural Science Foundation of China(22575230)。
文摘Conventional error cancellation approaches separate molecules into smaller fragments and sum the errors of all fragments to counteract the overall computational error of the parent molecules.However,these approaches may be ineffective for systems with strong localized chemical effects,as fragmenting specific substructures into simpler chemical bonds can introduce additional errors instead of mitigating them.To address this issue,we propose the Substructure-Preserved Connection-Based Hierarchy(SCBH),a method that automatically identifies and freezes substructures with significant local chemical effects prior to molecular fragmentation.The SCBH is validated by the gas-phase enthalpy of formation calculation of CHNO molecules.Therein,based on the atomization scheme,the reference and test values are derived at the levels of Gaussian-4(G4)and M062X/6-31+G(2df,p),respectively.Compared to commonly used approaches,SCBH reduces the average computational error by half and requires only15%of the computational cost of G4 to achieve comparable accuracy.Since different types of local effect structures have differentiated influences on gas-phase enthalpy of formation,substituents with strong electronic effects should be retained preferentially.SCBH can be readily extended to diverse classes of organic compounds.Its workflow and source code allow flexible customization of molecular moieties,including azide,carboxyl,trinitromethyl,phenyl,and others.This strategy facilitates accurate,rapid,and automated computations and corrections,making it well-suited for high-throughput molecular screening and dataset construction for gas-phase enthalpy of formation.
基金National Natural Science Foundation of China (50475148)Aeronautical Science Foundation of China (04C53015)Areonautical Sci-tech Innovation Foundation of China (07B53004)
文摘This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.
基金National Natural Science Foundation of China (60675054)National High-Tech Research and Development Program (2006AA04Z228)"111" Project (B07018)
文摘This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However, it depends highly on the accuracy of model. Model errors between the virtual and real environment exist inevitably. The existing way to deal with the problem is by means of either model matching or robot compliance control. As distinct from the existing methods, this article tries to combine m...
文摘A new instrument for checking the quality of elevator guide rails is introduced.With this instrument,the general geometric errors such as straightness,flatness,squareness,twist,thickness and height can be measured automatically,simultaneously in a short time with high accuracy.It is very useful for elevator guide rail factories to improve their work efficiency and the quality of their products.
文摘The theoretical lower bounds on mean squared channel estimation errors for typical fading channels are presented by the infinite-length and non-causal Wiener filter and the exact closed-form expressions of the lower bounds for different channel Doppler spectra are derived. Based on the obtained lower bounds on mean squared channel estimation errors, the limits on bit error rate （BER） for maximal ratio combining （MRC） with Gaussian distributed weighting errors on independent and identically distributed （i. i. d） fading channels are presented. Numerical results show that the BER performances of ideal MRC are the lower bounds on the BER performances of non-ideal MRC and deteriorate as the maximum Doppler frequency increases or the SNR of channel estimate decreases.
文摘Software synchronous sampling is widely employed in periodic signal measurement, but measurement errors occur very commonly. This paper analyses the cause of the errors, deduces the mathematical model for the measurement errors in measuring RMS voltage, RMS current and active power using the software synchronous sampling method. Some measures to reduce the errors are put forward by simulating.
