Numerical simulations and experiments showed that bump inlet had a remarkable effect on boundary layer diversion of supersonic flow.However,the design and analysis of bump in hypersonic flow was still few.In this pape...Numerical simulations and experiments showed that bump inlet had a remarkable effect on boundary layer diversion of supersonic flow.However,the design and analysis of bump in hypersonic flow was still few.In this paper,the mechanism of a supersonic bump inlet is introduced to the design of hypersonic forebody.A hypersonic inlet with an integrated bump/forebody is obtained by the Method Of Characteristics(MOC)based on a chin inlet.Numerical simulations show that the modified inlet achieves diversion of low-speed flow.Besides,the integrated bump/-forebody is also beneficial to inlet start.During the starting process,the shape of the separation zone is rebuilt by the modified forebody surface which makes spillage much easier.This new design leads to a reduction of the self-start Mach number by 0.95.展开更多
In this work, a novel airframe/propulsion integration design method of the wing-body configuration for hypersonic cruise aircraft is proposed, where the configuration is integrated with inward-turning inlets. With the...In this work, a novel airframe/propulsion integration design method of the wing-body configuration for hypersonic cruise aircraft is proposed, where the configuration is integrated with inward-turning inlets. With the help of this method, the major design concern of balancing the aerodynamic performance against the requirements for efficient propulsion can be well addressed. A novel geometric parametrically modelling method based on a combination of patched class and shape transition（CST） and COONs surface is proposed to represent the configuration, especially a complex configuration with an irregular inlet lip shape. The modelling method enlarges the design space of components on the premise of guaranteeing the configuration integrity via special constraints imposed on the interface across adjacent surfaces. A basic flow inside a cone shaped by a dual-inflection-point generatrix is optimized to generate the inward-turning inlet with improvements of both compression efficiency and flow uniformity. The performance improvement mechanism of this basic flow is the compression velocity variation induced by the variation of the generatrix slope along the flow path. At the design point, numerical simulation results show that the lift-to-drag ratio of the configuration is as high as 5.2 and the inlet works well with a high level of compression efficiency and flow uniformity. The design result also has a good performance on off-design conditions. The achievement of all the design targets turns out that the integration design method proposed in this paper is efficient and practical.展开更多
A design method based on tip to tail streamline tracing and osculating inward cone methods is discussed for designing the integrated Osculating Inward Cone Waverider Inlet（OICWI）. A practical geometrical constrained...A design method based on tip to tail streamline tracing and osculating inward cone methods is discussed for designing the integrated Osculating Inward Cone Waverider Inlet（OICWI）. A practical geometrical constrained experimental model of OICWI is designed based on the validated design method. It has a total contraction ratio of 4.61 and inner contraction ratio is 2.0. Wind-tunnel tests have been conducted for the OICWI model at free stream Mach number（Ma） of 4.0, 3.5 and 3.0 respectively. The experimental results show that the OICWI has high flow capture ratio and compression abilities. It can self-start at Ma= 3.5 and 4.0 and its flow capture ratio is 0.73 at Ma= 4.0, and Angle of Attack（AOA） 0°. The research results show that the OICWI has advantages of inward cone waverider and streamline tracing inlet. Present OICWI is a novel approach for waverider inlet integration studies and it will promote the use of waverider inlet integration configuration in the studies of airbreathing hypersonic vehicles.展开更多
Three kinds of forebody model of hypersonic vehicles were studied with numerical simulation method. It shows that the two-order compressive ramp model is the best selection among the three for its good evaluative para...Three kinds of forebody model of hypersonic vehicles were studied with numerical simulation method. It shows that the two-order compressive ramp model is the best selection among the three for its good evaluative parameters value at the cowl of the inlet. This model can provide higher value of flux coefficient and total pressure recovery coefficient and lower average Mach number compared with those of the other two models. Simultaneously different compressive angles may have different effects. The configuration which the first-order of compressive angle is 4° and the second 5° is the optimum combination. Furthermore factors such as attack angle were concerned. Better result may be obtained with a range of attack angles. Based on the work above the integrated design for forebody/inlet of a hypersonic vehicle was performed. The numerical result shows that this integrated model provides good flow field quality for inlet and engine work.展开更多
To reduce the propulsion system installation thrust loss under high angle of attack maneuvering,a control method based on real-time optimization of the integrated aeropropulsion is proposed.Firstly,based on data fitti...To reduce the propulsion system installation thrust loss under high angle of attack maneuvering,a control method based on real-time optimization of the integrated aeropropulsion is proposed.Firstly,based on data fitting and physical principle,an integrated onboard model of propulsion system is established,which can calculate various performance parameters of the propulsion system in real time,and has high accuracy and real-time performance.Secondly,to improve the compatibility of optimization real-time performance and search accuracy,the online optimization control of aero-propulsion system is realized based on an improved trust region algorithm.Finally,by controlling the auxiliary intake valve,a good match between inlet and engine is realized,which solves the problems of intake flow reducing and total pressure recovery coefficient declining,and improves the installation performance of propulsion system.The simulation results indicate that,compared with the conventional independent engine control,the real-time integrated optimization method reduces the installed thrust loss by 3.61%under the design condition,and 4.58%under the off-design condition.Furthermore,the simulation on HIL(Hardware-In-theLoop)platform verifies the real-time performance of integrated optimization method.展开更多
文摘Numerical simulations and experiments showed that bump inlet had a remarkable effect on boundary layer diversion of supersonic flow.However,the design and analysis of bump in hypersonic flow was still few.In this paper,the mechanism of a supersonic bump inlet is introduced to the design of hypersonic forebody.A hypersonic inlet with an integrated bump/forebody is obtained by the Method Of Characteristics(MOC)based on a chin inlet.Numerical simulations show that the modified inlet achieves diversion of low-speed flow.Besides,the integrated bump/-forebody is also beneficial to inlet start.During the starting process,the shape of the separation zone is rebuilt by the modified forebody surface which makes spillage much easier.This new design leads to a reduction of the self-start Mach number by 0.95.
基金supported by the ‘‘111" Project of China (No. B17037)
文摘In this work, a novel airframe/propulsion integration design method of the wing-body configuration for hypersonic cruise aircraft is proposed, where the configuration is integrated with inward-turning inlets. With the help of this method, the major design concern of balancing the aerodynamic performance against the requirements for efficient propulsion can be well addressed. A novel geometric parametrically modelling method based on a combination of patched class and shape transition（CST） and COONs surface is proposed to represent the configuration, especially a complex configuration with an irregular inlet lip shape. The modelling method enlarges the design space of components on the premise of guaranteeing the configuration integrity via special constraints imposed on the interface across adjacent surfaces. A basic flow inside a cone shaped by a dual-inflection-point generatrix is optimized to generate the inward-turning inlet with improvements of both compression efficiency and flow uniformity. The performance improvement mechanism of this basic flow is the compression velocity variation induced by the variation of the generatrix slope along the flow path. At the design point, numerical simulation results show that the lift-to-drag ratio of the configuration is as high as 5.2 and the inlet works well with a high level of compression efficiency and flow uniformity. The design result also has a good performance on off-design conditions. The achievement of all the design targets turns out that the integration design method proposed in this paper is efficient and practical.
基金supported by the National Natural Science Foundation of China (Nos. 51376192 and 91216303)
文摘A design method based on tip to tail streamline tracing and osculating inward cone methods is discussed for designing the integrated Osculating Inward Cone Waverider Inlet（OICWI）. A practical geometrical constrained experimental model of OICWI is designed based on the validated design method. It has a total contraction ratio of 4.61 and inner contraction ratio is 2.0. Wind-tunnel tests have been conducted for the OICWI model at free stream Mach number（Ma） of 4.0, 3.5 and 3.0 respectively. The experimental results show that the OICWI has high flow capture ratio and compression abilities. It can self-start at Ma= 3.5 and 4.0 and its flow capture ratio is 0.73 at Ma= 4.0, and Angle of Attack（AOA） 0°. The research results show that the OICWI has advantages of inward cone waverider and streamline tracing inlet. Present OICWI is a novel approach for waverider inlet integration studies and it will promote the use of waverider inlet integration configuration in the studies of airbreathing hypersonic vehicles.
文摘Three kinds of forebody model of hypersonic vehicles were studied with numerical simulation method. It shows that the two-order compressive ramp model is the best selection among the three for its good evaluative parameters value at the cowl of the inlet. This model can provide higher value of flux coefficient and total pressure recovery coefficient and lower average Mach number compared with those of the other two models. Simultaneously different compressive angles may have different effects. The configuration which the first-order of compressive angle is 4° and the second 5° is the optimum combination. Furthermore factors such as attack angle were concerned. Better result may be obtained with a range of attack angles. Based on the work above the integrated design for forebody/inlet of a hypersonic vehicle was performed. The numerical result shows that this integrated model provides good flow field quality for inlet and engine work.
基金supported in part by the National Natural Science Foundation of China (Nos. 51906102 and 52176009)the National Science and Technology Major Project, China (Nos. J2019-II-0009-0053, J2019-I-0020-0019 and 2019III-0014-0058)+2 种基金the Innovation Centre for Advanced Aviation Power, China (Nos. HKCX2020-02-022 and HKCX2020-02-027)the Research on the Basic Problem of Intelligent Aero-engine, China (No. 2017-JCJQZD-047-21)the Fundamental Research Funds for the Central Universities, China (No. NZ2020002)
文摘To reduce the propulsion system installation thrust loss under high angle of attack maneuvering,a control method based on real-time optimization of the integrated aeropropulsion is proposed.Firstly,based on data fitting and physical principle,an integrated onboard model of propulsion system is established,which can calculate various performance parameters of the propulsion system in real time,and has high accuracy and real-time performance.Secondly,to improve the compatibility of optimization real-time performance and search accuracy,the online optimization control of aero-propulsion system is realized based on an improved trust region algorithm.Finally,by controlling the auxiliary intake valve,a good match between inlet and engine is realized,which solves the problems of intake flow reducing and total pressure recovery coefficient declining,and improves the installation performance of propulsion system.The simulation results indicate that,compared with the conventional independent engine control,the real-time integrated optimization method reduces the installed thrust loss by 3.61%under the design condition,and 4.58%under the off-design condition.Furthermore,the simulation on HIL(Hardware-In-theLoop)platform verifies the real-time performance of integrated optimization method.
