By combining the merits of radiative cooling(RC)and evaporation cooling(EC),radiative coupled evaporative cooling(REC)has attracted considerable attention for sub-ambient cooling purposes.However,for outdoor devices,t...By combining the merits of radiative cooling(RC)and evaporation cooling(EC),radiative coupled evaporative cooling(REC)has attracted considerable attention for sub-ambient cooling purposes.However,for outdoor devices,the interior heating power would increase the working temperature and fire risk,which would suppress their above-ambient heat dissipation capabilities and passive water cycle properties.In this work,we introduced a REC design based on an all-in-one photonic hydrogel for above-ambient heat dissipation and flame retardancy.Unlike conventional design RC film for heat dissipation with limited cooling power and fire risk,REC hydrogel can greatly improve the heat dissipation performance in the daytime with a high workload,indicating a 12.0℃lower temperature than the RC film under the same conditions in the outdoor experiment.In the nighttime with a low workload,RC-assisted adsorption can improve atmospheric water harvesting to ensure EC in the daytime.In addition,our REC hydrogel significantly enhanced flame retardancy by absorbing heat without a corresponding temperature rise,thus mitigating fire risks.Thus,our design shows a promising solution for the thermal management of outdoor devices,delivering outstanding performance in both heat dissipation and flame retardancy.展开更多
In this study,a Gaussian Process Regression(GPR)surrogate model coupled with a Bayesian optimization algorithm was employed for the single-objective design optimization of fan-shaped film cooling holes on a concave wa...In this study,a Gaussian Process Regression(GPR)surrogate model coupled with a Bayesian optimization algorithm was employed for the single-objective design optimization of fan-shaped film cooling holes on a concave wall.Fan-shaped holes,commonly used in gas turbines and aerospace applications,flare toward the exit to form a protective cooling film over hot surfaces,enhancing thermal protection compared to cylindrical holes.An initial hole configuration was used to improve adiabatic cooling efficiency.Design variables included the hole injection angle,forward expansion angle,lateral expansion angle,and aperture ratio,while the objective function was the average adiabatic cooling efficiency of the concave wall surface.Optimization was performed at two representative blowing ratios,M=1.0 and M=1.5,using the GPR-based surrogate model to accelerate exploration,with the Bayesian algorithm identifying optimal configurations.Results indicate that the optimized fan-shaped holes increased cooling efficiency by 15.2%and 12.3%at low and high blowing ratios,respectively.Analysis of flow and thermal fields further revealed how the optimized geometry influenced coolant distribution and heat transfer,providing insight into the mechanisms driving the improved cooling performance.展开更多
Methods allowing passive daytime radiative cooling(PDRC)to be carried out in an energy-efficient and scalable way are potentially important for various disciplines.Here,we report a sustainable strategy for scalable-de...Methods allowing passive daytime radiative cooling(PDRC)to be carried out in an energy-efficient and scalable way are potentially important for various disciplines.Here,we report a sustainable strategy for scalable-designed and color-regulating PDRC coating based on high-crystallinity photonic metamaterial(crystallinity:71.5%;enhanced assembly efficiency:72%),that is derived from the as-prepared 55 wt%solid content poly(methyl methacrylate-butyl acrylate-methacrylic acid)P(MMA-BA-MAA)monodispersed latexes(approaching theoretical limit:59 wt%).Robust meter-scale PDRC coatings are constructed by various industrial modes onto diverse surfaces,addressing bottlenecks like dull appearance,high cost,low efficiency,and hard construction.Notably,the solar reflectance,long-wave infrared emittance,and calculated theoretical cooling power of the designed PDRC coating,respectively,reach~0.94,~0.97,and~95.5 W m^(-2)under solar radiation,which can achieve an average 5.3℃ sub-ambient daytime temperature drop in the summer in Nanjing.The cooling performance,scale preparation,and cost-effectiveness of the PDRC coating have extended into leading position compared with those of state-of-the-art designs.This work provides promising route to reduce carbon emissions and energy consumption for global sustainability.展开更多
Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emissi...Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.展开更多
Radiative cooling passively emits heat to outer space without energy input,offering promise for energy-efficient thermal management.It is an important solution to promote the low-carbon environmental protection strate...Radiative cooling passively emits heat to outer space without energy input,offering promise for energy-efficient thermal management.It is an important solution to promote the low-carbon environmental protection strategy.With the continuous development of radiative cooling technologies,the material selection,preparation process,structural design,and applica-tion fields have also made more diverse progress.Therefore,this review aims to systematically introduce the fundamental concepts and underlying principles of radiative cooling.A summary of the commonly used materials for radiative cooling is provided.In addition,the advanced fabrication processes and structural designs of radiative cooling materials are further explored and discussed.Subsequently,the unique functions of radiative cooling materials are highlighted to enhance their applicability and usefulness across various fields.An overview of combining radiative cooling materials with different fields is also provided.In reality,these applications hold the potential to improve thermal management across a range of fields.Finally,it summarizes the shortcomings and great potential of radiative cooling materials in various fields.It also looks forward to the future,aiming to promote the progress and widespread adoption of radiative cooling technologies.展开更多
Diffusion shaped film cooling holes with compound-angle diffuser structures exhibit superior cooling performance,which have gradually been applied in turbine blades of the advanced aeroengines.In our previous research...Diffusion shaped film cooling holes with compound-angle diffuser structures exhibit superior cooling performance,which have gradually been applied in turbine blades of the advanced aeroengines.In our previous research,the method of Servo Scanning three-dimensional Electrical Discharge Machining(SS-3D EDM)has been proven effective for high-precision machining of complex 3D cavities,offering notable advantages such as low tool cost,automatic compensation of electrode wear,and high machining flexibility.However,using tubular electrodes in SS-3D EDM,challenges persist under the conditions of the large layer depth.The lateral discharge phenomenon of tubular electrodes causes significant deformation at the electrode tip,increases the risk of lateral collisions,and complicates the accurate calculation of electrode wear length.To address these limitations,this research proposes a Trajectory Servo Scanning three-dimensional Electrical Discharge Machining(TSS-3D EDM)process.Axial servo motion of tubular electrode is used to maintain the discharge gap of electrode bottom,and an innovative trajectory servo motion along the tangential orientation is introduced to stabilize the lateral discharge gap,enabling automatic compensation for tool wear at the rotating electrode tip.The effect of servo control parameters on machining depth accuracy is analyzed.Furthermore,a method for electrode wear length calculation is proposed based on the voltage signals of discharge gaps.An estimation method for the electrode wear coefficient is presented.Machining experiments on superalloys validate the effectiveness and capabilities of the TSS-3D EDM method by fabricating fan-shaped and conical diffusion shaped film cooling holes.The results show that the calculation error of tubular electrode wear length<5%,the dimensional error of hole profile dimensions as 4%–6%,the repeatability error<±4μm,and the material removal rate up to 0.664 mm^(3)/min using tubular electrodes with an outer diameter of 0.4 mm.展开更多
The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC c...The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC carbides and eutectic(γ+γ′)formation,differential thermal analysis(DTA)was utilized to investigate the effect of cooing rate(10-90℃·min^(-1))on solidification behavior and micro-segregation of GH4975 alloy.According to the thermodynamic calculation and distribution characteristics of precipitates,the MC carbides can act as nucleation sites forγdendrites,but the nucleation ofγdendrites becomes less dependent on the MC carbide primers at higher cooling rates.As theγdendrites grow,the elements including Ti and Nb gradually accumulate in the residual liquid and leads to the formation of more MC carbides near the interdendritic region.Finally,the solidification is terminated with the formation of eutectic(γ+γ′).With an increase in cooling rate,the liquidus temperature rises,but the solidus temperature decreases,and thus the solidification range is obviously enlarged.The dendritic structure is significantly refined by the increase of cooling rate.The secondary dendrite arm spacing,λ_(2),as a function of cooling rate,T,can be expressed asλ_(2)=216.78T^(-0.42).Moreover,the increasing cooling rate weakens the back diffusion of Al,Ti,and Nb,increases the undercooling,and limits the growth of precipitates.Consequently,the sizes of MC carbides,eutectic(γ+γ′),and primaryγ′significantly decrease,but the area fraction of eutectic(γ+γ′)linerly increases as the cooling rate rises.Thus moderate cooling rate(such as 30℃·min^(-1))should be selected during the solidification process of GH4975 alloy.展开更多
The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investig...The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investigated.For this purpose,the Mg-0.6Si,Mg-1.34Si,and Mg-3Si(wt%)alloys were considered as hypoeutectic,eutectic,and hypereutectic alloys,respectively.By decreasing the geometrical modulus of the solidifying section(increasing cooling rate),remarkable grain refinement,refining the dendrite arm spacing(DAS),and modification of Mg_(2)Si particles were achieved.Moreover,the grain size was refined via Si addition in the hypoeutectic range,while coarsening of grain size at high Si concentrations was observed.The results of shear punch testing and hardness measurements demonstrated that the ultimate shear strength(USS)and hardness increased by increasing the cooling rate during solidification.Moreover,Si addition generally improved hardness,while the highest USS level was achieved for the eutectic alloy due to the fine grain size and strengthening effect of the eutectic constituent.However,regarding the hypereutectic Mg-3Si alloy that exhibited high hardness,the shear properties were inferior due to the detrimental effect of the primary Mg_(2)Si particles.Finally,the results were discussed with consideration of the relationship between strength and hardness,for which the critical effect of Si was clarified.展开更多
Radiative cooling systems(RCSs)possess the distinctive capability to dissipate heat energy via solar and thermal radiation,making them suitable for thermal regulation and energy conservation applications,essential for...Radiative cooling systems(RCSs)possess the distinctive capability to dissipate heat energy via solar and thermal radiation,making them suitable for thermal regulation and energy conservation applications,essential for mitigating the energy crisis.A comprehensive review connecting the advancements in engineered radiative cooling systems(ERCSs),encompassing material and structural design as well as thermal and energy-related applications,is currently absent.Herein,this review begins with a concise summary of the essential concepts of ERCSs,followed by an introduction to engineered materials and structures,containing nature-inspired designs,chromatic materials,meta-structural configurations,and multilayered constructions.It subsequently encapsulates the primary applications,including thermal-regulating textiles and energy-saving devices.Next,it highlights the challenges of ERCSs,including maximized thermoregulatory effects,environmental adaptability,scalability and sustainability,and interdisciplinary integration.It seeks to offer direction for forthcoming fundamental research and industrial advancement of radiative cooling systems in real-world applications.展开更多
The promising prospects for all-day building thermal management are driving widespread research into spectrally selective manipulation materials.This article first summarizes the evolution path of metal reversible dep...The promising prospects for all-day building thermal management are driving widespread research into spectrally selective manipulation materials.This article first summarizes the evolution path of metal reversible deposition technology,noting its advantages of cost-effectiveness and scientific rigor.It then highlights the groundbreaking work by Wang et al.(published in ACS Energy Letters,2025,10,3231)on coupling metastructured photothermal conversion electrodes and reversible Cu deposition for all-day energy management.Finally,the commercial viability of Wang et al.'s approach for building energy saving and its potential applicability to other scenarios are elaborated.展开更多
With the rapid growth of cloud computing,the number of data centers(DCs)continuously increases,leading to a high-energy consumption dilemma.Cooling,apart from IT equipment,represents the largest energy consumption in ...With the rapid growth of cloud computing,the number of data centers(DCs)continuously increases,leading to a high-energy consumption dilemma.Cooling,apart from IT equipment,represents the largest energy consumption in DCs.Passive design(PD)and active design(AD)are two important approaches in architectural design to reduce energy consumption.However,for DC cooling,few studies have summarized AD,and there are almost no studies on PD.Based on existing international research(2005-2024),this paper summarizes the current state of cooling strategies for DCs.PD encompasses floors,ceilings,and layout and zoning of racks.Additionally,other passive strategies not yet studied in DCs are critically examined.AD includes air,liquid,free,and two-phase cooling.This paper systematically compares the performance of different AD technologies on various KPIs,including energy,economic,and environmental indicators.This paper also explores the application of different cooling design strategies through best-practice examples and presents advanced algorithms for energy management in operational DCs.This study reveals that free cooling is widely employed,with Artificial Neural Networks emerging as the most popular algorithm for managing cooling energy.Finally,this paper suggests four future directions for reducing cooling energy in DCs,with a focus on the development of passive strategies.This paper provides an overview and guide to DC energy-consumption issues,emphasizes the importance of implementing passive and active design strategies to reduce DC cooling energy consumption,and provides directions and references for future energy-efficient DC designs.展开更多
During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study invest...During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study investigates the coupled thermo-mechanical behavior of granite during heating and cooling through a combination of laboratory tests and finite difference method analysis.Initial investigations involve X-ray diffraction,thermal expansion test,thermogravimetric analysis,and uniaxial compression test.Results show the significant variations of granite properties under different thermal conditions,attributed to temperature gradients,water evaporation,and mineral phase transitions.Subsequently,a model considering temperature-dependent parameters and real-time cooling rates was employed to simulate linear heating and nonlinear cooling processes.Simulation results indicate that the thermal cracking predominantly occurs during the heating stage,with tensile failure as the primary mode.Additionally,a faster real-time cooling rate at higher temperatures intensifies the thermal cracking behavior in granite.This study effectively elucidates the thermomechanical coupling behavior of granite during heating and cooling processes,providing insights into the mechanisms of mechanical property changes with rising or decreasing temperatures.展开更多
We propose a novel cooling protocol within a triple-Laguerre-Gaussian cavity optomechanical system,which is designed to suppress the thermal vibrations of a rotating mirror to reach its quantum ground state.The system...We propose a novel cooling protocol within a triple-Laguerre-Gaussian cavity optomechanical system,which is designed to suppress the thermal vibrations of a rotating mirror to reach its quantum ground state.The system incorporates two auxiliary cavities and an atomic ensemble coupled to a Laguerre-Gaussian rotational cavity.By carefully selecting system parameters,the cooling process of the rotating mirror is significantly enhanced,while the heating process is effectively suppressed,enabling efficient ground-state cooling even in the unresolved sideband regime.Compared to previous works,our scheme reduces the stringent restrictions on auxiliary systems,making it more experimentally feasible under broader parameter conditions.These findings provide a robust approach for achieving ground-state cooling in mechanical resonators.展开更多
As an emerging thermal management strategy,dynamic radiative cooling(DRC)technology enables dynamic modulation of spectral radiation properties under varying environmental conditions through the directional design of ...As an emerging thermal management strategy,dynamic radiative cooling(DRC)technology enables dynamic modulation of spectral radiation properties under varying environmental conditions through the directional design of material spectral characteristics.However,a comprehensive review of the basic physical mechanisms of radiative heat transfer in DRC materials and various design principles involved in dynamic radiative thermal regulation is still lacking.This review systematically summarizes recent advances in this field,spanning from fundamental physical principles to intrinsic molecular and electronic mechanisms,and further to representative material systems and multi-band regulation strategies,highlighting the interdisciplinary research achievements and technological innovations.This work outlines the core mechanisms governing the regulation of different spectral bands during radiative heat transfer processes.Then,the main categories of DRC materials are systematically reviewed,including actively responsive structures,passively responsive structures,and multi-stimuli-responsive materials.Furthermore,the challenges faced by current DRC technology and future development trends are summarized and discussed,providing valuable reference and guidance for further research in this field.Although DRC technologies still face significant challenges in material stability,manufacturing processes,and system integration,the continuous advances in related areas and multifunctional materials are expected to broaden the application prospects of DRC in the future.展开更多
This study aims to mitigate crosswind-induced performance degradation in Natural Draft Dry Cooling Towers used in power plants by developing and assessing windbreak configurations that enhance ventilation while minimi...This study aims to mitigate crosswind-induced performance degradation in Natural Draft Dry Cooling Towers used in power plants by developing and assessing windbreak configurations that enhance ventilation while minimizing additional airflow resistance.Three novel windbreak designs,namely single-windbreak configuration with curved profile,double-windbreak configuration with curved profile,and double-windbreak configuration with inverted curved profile,are proposed accordingly and evaluated against conventional solutions.Three-dimensional numerical models of a 120 m high NDDCT equipped with these windbreaks,together with a conventional Y-shaped windbreak,are developed for systematic comparison.The results demonstrate that windbreak effectiveness strongly depends on crosswind intensity.At low crosswind speeds of 0-6 m/s,the Y-shaped windbreak provides the greatest enhancement,increasing the ventilation rate by 25.45%and the heat rejection rate by 21.37%at 6 m/s compared with the no-windbreak configuration.In contrast,under moderate to strong crosswinds of 6-18 m/s,the single-windbreak configuration with curved profile exhibits superior performance.At 18 m/s,it increases the ventilation rate by 148.88%and the heat rejection rate by 79.74%relative to the baseline case,outperforming the Y-shaped windbreak by 26.59%in ventilation rate and 17.01%in heat rejection capacity.Analysis of airflow structure,temperature fields,and velocity distributions confirms that the single-windbreak configuration with curved profile more effectively suppresses crosswind penetration and promotes stable upward airflow at higher wind speeds.Based on a comprehensive assessment of aerodynamic and thermal performance,the Y-shaped windbreak is recommended for regions where crosswind speeds remain below 6 m/s,whereas the single-windbreak configuration with curved profile is preferable for sites exposed to stronger crosswinds exceeding this threshold.展开更多
The operational temperature rise of photovoltaic(PV)panels reduces their power generation efficiency and shortens their lifespan.Hygroscopic hydrogel-based evaporative cooling technology provides a promising solution ...The operational temperature rise of photovoltaic(PV)panels reduces their power generation efficiency and shortens their lifespan.Hygroscopic hydrogel-based evaporative cooling technology provides a promising solution for PV cooling due to high-enthalpy water evaporation.However,current hydrogels remain plagued by cooling interface mismatch and environmental concerns,which limit their practical implementation.Herein,a“green”and self-adhesive hygroscopic hydrogel consisting only of cheap lotus root powder and LiCl is designed,which can form robust interfacial adhesion with PV panels for efficient and durable cooling.Leveraging its compelling hygroscopicity,the hydrogel is able to rapidly capture moisture to recover cooling capacity,thus achieving self-sustained cooling.Besides,the“salting-in”effect brought by LiCl endows the hydrogel with notable softness and self-adhesiveness,which enables it to tightly combine with PV panels to optimize heat conduction and improve cooling efficiency.As a result,under 1.0 kW m^(-2)illumination,a PV temperature drop of 18.2℃ and a cooling power of 358 W m^(-2)were delivered by attaching the hydrogel to the rear of the PV panel,accompanied by a 7.7%improvement in energy efficiency.Overall,this self-sustained passive cooling strategy,activated by the all-natural hydrogel,sheds light on the development of PV thermal management.展开更多
Urban Heat Island(UHI)effects are exacerbated by the expansion of impervious surfaces and loss of vegetation in urban centers,leading to elevated air and surface temperatures and reduced thermal comfort.Urban trees,th...Urban Heat Island(UHI)effects are exacerbated by the expansion of impervious surfaces and loss of vegetation in urban centers,leading to elevated air and surface temperatures and reduced thermal comfort.Urban trees,through shading and evapotranspiration,are among the most effective Nature-based Solutions(NbS)for passive cooling.This study assesses the cooling potential of selected tree species by analyzing their morphological and physiological traits using a combination of ENVI-met microclimate simulations and multiple regression modeling.A total of 15 urban tree species were selected from the literature and analyzed based on their dependency of their cooling efficacy.Later validated in urban setting by Envi-met simulations.Key traits,such as Leaf Area Index(LAI),canopy density,transpiration rate,tree height,rooting depth,and water availability,were analyzed.Multiple linear regression analysis was conducted to quantify the contribution of each trait to ambient temperature reduction.Results revealed that LAI(R^(2)=0.76,p<0.001)and transpiration rate(R^(2)=0.71,p<0.001)were the most significant predictors of daytime cooling,while canopy openness and tree height were more strongly correlated with nighttime heat dissipation.High-performing species,such as Ficus benghalensis,Azadirachta indica,and Samanea saman,demonstrated a maximum temperature reduction of 2.5-4.2℃,especially in compact,low-rise,and mid-rise zones.The study provides a quantitative trait-based framework for tree selection in urban greening initiatives and offers evidence to guide landscape planning and UHI mitigation strategies through scientifically informed plantation design.展开更多
A sintering double-stage cooling unit(SDCU)was proposed to address the issues of material segregation and unclear particle motion mechanisms in the sintered ore vertical cooler as well as the low efficiency of energy ...A sintering double-stage cooling unit(SDCU)was proposed to address the issues of material segregation and unclear particle motion mechanisms in the sintered ore vertical cooler as well as the low efficiency of energy recovery in the circular recirculating cooler(CRC).The proposed SDCU improves traditional waste heat recovery and enhances steady-state heat transfer efficiency under gas–solid conditions.Comparative analyses of exergy and exergy efficiency between the SDCU and CRC were presented.The effects of key parameters,including the gas–solid volume-to-mass ratio,inlet air temperature,and inlet sinter temperature,on system performance were examined.Furthermore,the integration of the SDCU with Joule-Brayton cycle-based phase-change thermal energy storage and supercritical CO_(2) Brayton cycle systems was explored.The results indicate that the SDCU outperforms the CRC in exergy recovery and efficiency by 6.73%and 6.26%,respectively.The optimal gas–solid mass ratio in the recirculating cooling unit is 1.08 m^(3)/kg,leading to improvements in SDCU exergy by 2.1 and 2.3 GJ/h for every 10 K increase in inlet ore and air temperatures,respectively.The phase-change thermal energy storage system stores 423.7 kW of thermal energy,while the supercritical CO_(2) system recovers 12.2 MW of thermal energy.展开更多
Correction to:Nuclear Science and Techniques(2025)36:111 https://doi.org/10.1007/s41365-025-01681-9.In the sentence beginning‘The weights of the parameters used for the…’in this article,the text‘RCSs’should have ...Correction to:Nuclear Science and Techniques(2025)36:111 https://doi.org/10.1007/s41365-025-01681-9.In the sentence beginning‘The weights of the parameters used for the…’in this article,the text‘RCSs’should have read‘SCRs’.In Table 7 of this article,the column header ρ_fuel was incorrect and should have read CPv_fuel.For completeness and transparency,the old incorrect version and the corrected version of Table 7 are displayed below.展开更多
Friction rolling additive manufacturing(FRAM)is a solid-state additive manufacturing technology that plasticizes the feed and deposits a material using frictional heat generated by the tool head.The thermal efficiency...Friction rolling additive manufacturing(FRAM)is a solid-state additive manufacturing technology that plasticizes the feed and deposits a material using frictional heat generated by the tool head.The thermal efficiency of FRAM,which depends only on friction to generate heat,is low,and the thermal-accumulation effect of the deposition process must be addressed.An FRAM heat-balance-control method that combines plasma-arc preheating and instant water cooling(PC-FRAM)is devised in this study,and a temperature field featuring rapidly increasing and decreasing temperature is constructed around the tool head.Additionally,2195-T87 Al-Li alloy is used as the feed material,and the effects of heating and cooling rates on the microstructure and mechanical properties are investigated.The results show that water cooling significantly improves heat accumulation during the deposition process.The cooling rate increases by 11.7 times,and the high-temperature residence time decreases by more than 50%.The grain size of the PC-FRAM sample is the smallest,i.e.,3.77±1.03μm,its dislocation density is the highest,and the number density of precipitates is the highest,the size of precipitates is the smallest,which shows the best precipitation-strengthening effect.The hardness test results are consistent with the precipitation distribution.The ultimate tensile strength,yield strength and elongation of the PC-FRAM samples are the highest(351±15.6 MPa,251.3±15.8 MPa and 16.25%±1.25%,respectively)among the samples investigated.The preheating and water-cooling-assisted deposition simultaneously increases the tensile strength and elongation of the deposited samples.The combination of preheating and instant cooling improves the deposition efficiency of FRAM and weakens the thermal-softening effect.展开更多
基金financially supported by the Science and Technology Innovation Program of Hunan Province(2024RC3003)the Central South University Innovation-Driven Research Programme(2023CXQD012)the Initiative for Sustainable Energy for its financial support。
文摘By combining the merits of radiative cooling(RC)and evaporation cooling(EC),radiative coupled evaporative cooling(REC)has attracted considerable attention for sub-ambient cooling purposes.However,for outdoor devices,the interior heating power would increase the working temperature and fire risk,which would suppress their above-ambient heat dissipation capabilities and passive water cycle properties.In this work,we introduced a REC design based on an all-in-one photonic hydrogel for above-ambient heat dissipation and flame retardancy.Unlike conventional design RC film for heat dissipation with limited cooling power and fire risk,REC hydrogel can greatly improve the heat dissipation performance in the daytime with a high workload,indicating a 12.0℃lower temperature than the RC film under the same conditions in the outdoor experiment.In the nighttime with a low workload,RC-assisted adsorption can improve atmospheric water harvesting to ensure EC in the daytime.In addition,our REC hydrogel significantly enhanced flame retardancy by absorbing heat without a corresponding temperature rise,thus mitigating fire risks.Thus,our design shows a promising solution for the thermal management of outdoor devices,delivering outstanding performance in both heat dissipation and flame retardancy.
基金supported by the Jiangsu Association for Science and Technology,grant number SKX 0225089the National Natural Science Foundation of China,grant number 52476027.
文摘In this study,a Gaussian Process Regression(GPR)surrogate model coupled with a Bayesian optimization algorithm was employed for the single-objective design optimization of fan-shaped film cooling holes on a concave wall.Fan-shaped holes,commonly used in gas turbines and aerospace applications,flare toward the exit to form a protective cooling film over hot surfaces,enhancing thermal protection compared to cylindrical holes.An initial hole configuration was used to improve adiabatic cooling efficiency.Design variables included the hole injection angle,forward expansion angle,lateral expansion angle,and aperture ratio,while the objective function was the average adiabatic cooling efficiency of the concave wall surface.Optimization was performed at two representative blowing ratios,M=1.0 and M=1.5,using the GPR-based surrogate model to accelerate exploration,with the Bayesian algorithm identifying optimal configurations.Results indicate that the optimized fan-shaped holes increased cooling efficiency by 15.2%and 12.3%at low and high blowing ratios,respectively.Analysis of flow and thermal fields further revealed how the optimized geometry influenced coolant distribution and heat transfer,providing insight into the mechanisms driving the improved cooling performance.
基金support of the National Natural Science Foundation of China(grant 22508184 to X.Q.Y.,grant 21736006 to S.C.,and grant 22278225 to S.C.)supported by the Natural Funding Program of Jiangsu Province(grant BK20250610 to X.Q.Y.).
文摘Methods allowing passive daytime radiative cooling(PDRC)to be carried out in an energy-efficient and scalable way are potentially important for various disciplines.Here,we report a sustainable strategy for scalable-designed and color-regulating PDRC coating based on high-crystallinity photonic metamaterial(crystallinity:71.5%;enhanced assembly efficiency:72%),that is derived from the as-prepared 55 wt%solid content poly(methyl methacrylate-butyl acrylate-methacrylic acid)P(MMA-BA-MAA)monodispersed latexes(approaching theoretical limit:59 wt%).Robust meter-scale PDRC coatings are constructed by various industrial modes onto diverse surfaces,addressing bottlenecks like dull appearance,high cost,low efficiency,and hard construction.Notably,the solar reflectance,long-wave infrared emittance,and calculated theoretical cooling power of the designed PDRC coating,respectively,reach~0.94,~0.97,and~95.5 W m^(-2)under solar radiation,which can achieve an average 5.3℃ sub-ambient daytime temperature drop in the summer in Nanjing.The cooling performance,scale preparation,and cost-effectiveness of the PDRC coating have extended into leading position compared with those of state-of-the-art designs.This work provides promising route to reduce carbon emissions and energy consumption for global sustainability.
基金financial support from the National Natural Science Foundation of China(Grant No.52273067,52233006)the Fundamental Research Funds for the Central Universities(Grant No.2232023A-03)+3 种基金the Shuguang Program of Shanghai Education Development Foundation and Shanghai Municipal Education Commission(Grant No.23SG29)the Natural Science Foundation of Shanghai(Grant No.24ZR1402400)the Shanghai Scientific and Technological Innovation Project(Grant No.24520713000)Innovation Program of Shanghai Municipal Education Commission(Grant No.2021-01-07-00-03-E00108).
文摘Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.
基金National Natural Science Foundation of China Excellent Youth Fund(No.52222509)the Foundation for Innovative Research Groups of the National Natural Science Foundation of China(No.52021003)+3 种基金National Key Research and Development Program of China(No.2018YFA0703300)National Natural Science Foundation of China(No.52105298)Science and Technology Development Program of Jilin Province(No.SKL202402005)"Fundamental Research Funds for the Central Universities".
文摘Radiative cooling passively emits heat to outer space without energy input,offering promise for energy-efficient thermal management.It is an important solution to promote the low-carbon environmental protection strategy.With the continuous development of radiative cooling technologies,the material selection,preparation process,structural design,and applica-tion fields have also made more diverse progress.Therefore,this review aims to systematically introduce the fundamental concepts and underlying principles of radiative cooling.A summary of the commonly used materials for radiative cooling is provided.In addition,the advanced fabrication processes and structural designs of radiative cooling materials are further explored and discussed.Subsequently,the unique functions of radiative cooling materials are highlighted to enhance their applicability and usefulness across various fields.An overview of combining radiative cooling materials with different fields is also provided.In reality,these applications hold the potential to improve thermal management across a range of fields.Finally,it summarizes the shortcomings and great potential of radiative cooling materials in various fields.It also looks forward to the future,aiming to promote the progress and widespread adoption of radiative cooling technologies.
基金co-supported by the Tsinghua University Initiative Scientific Research Program,China(No.20244186005)the Science Center for Gas Turbine Project,China(No.P2022-A-IV-002-003)the National Natural Science Foundation of China(No.92060108)。
文摘Diffusion shaped film cooling holes with compound-angle diffuser structures exhibit superior cooling performance,which have gradually been applied in turbine blades of the advanced aeroengines.In our previous research,the method of Servo Scanning three-dimensional Electrical Discharge Machining(SS-3D EDM)has been proven effective for high-precision machining of complex 3D cavities,offering notable advantages such as low tool cost,automatic compensation of electrode wear,and high machining flexibility.However,using tubular electrodes in SS-3D EDM,challenges persist under the conditions of the large layer depth.The lateral discharge phenomenon of tubular electrodes causes significant deformation at the electrode tip,increases the risk of lateral collisions,and complicates the accurate calculation of electrode wear length.To address these limitations,this research proposes a Trajectory Servo Scanning three-dimensional Electrical Discharge Machining(TSS-3D EDM)process.Axial servo motion of tubular electrode is used to maintain the discharge gap of electrode bottom,and an innovative trajectory servo motion along the tangential orientation is introduced to stabilize the lateral discharge gap,enabling automatic compensation for tool wear at the rotating electrode tip.The effect of servo control parameters on machining depth accuracy is analyzed.Furthermore,a method for electrode wear length calculation is proposed based on the voltage signals of discharge gaps.An estimation method for the electrode wear coefficient is presented.Machining experiments on superalloys validate the effectiveness and capabilities of the TSS-3D EDM method by fabricating fan-shaped and conical diffusion shaped film cooling holes.The results show that the calculation error of tubular electrode wear length<5%,the dimensional error of hole profile dimensions as 4%–6%,the repeatability error<±4μm,and the material removal rate up to 0.664 mm^(3)/min using tubular electrodes with an outer diameter of 0.4 mm.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52474362,52174317 and 51904146)the General Project Funded by Liaoning Province Education Department(Grant No.JYTMS20230943)。
文摘The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC carbides and eutectic(γ+γ′)formation,differential thermal analysis(DTA)was utilized to investigate the effect of cooing rate(10-90℃·min^(-1))on solidification behavior and micro-segregation of GH4975 alloy.According to the thermodynamic calculation and distribution characteristics of precipitates,the MC carbides can act as nucleation sites forγdendrites,but the nucleation ofγdendrites becomes less dependent on the MC carbide primers at higher cooling rates.As theγdendrites grow,the elements including Ti and Nb gradually accumulate in the residual liquid and leads to the formation of more MC carbides near the interdendritic region.Finally,the solidification is terminated with the formation of eutectic(γ+γ′).With an increase in cooling rate,the liquidus temperature rises,but the solidus temperature decreases,and thus the solidification range is obviously enlarged.The dendritic structure is significantly refined by the increase of cooling rate.The secondary dendrite arm spacing,λ_(2),as a function of cooling rate,T,can be expressed asλ_(2)=216.78T^(-0.42).Moreover,the increasing cooling rate weakens the back diffusion of Al,Ti,and Nb,increases the undercooling,and limits the growth of precipitates.Consequently,the sizes of MC carbides,eutectic(γ+γ′),and primaryγ′significantly decrease,but the area fraction of eutectic(γ+γ′)linerly increases as the cooling rate rises.Thus moderate cooling rate(such as 30℃·min^(-1))should be selected during the solidification process of GH4975 alloy.
文摘The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investigated.For this purpose,the Mg-0.6Si,Mg-1.34Si,and Mg-3Si(wt%)alloys were considered as hypoeutectic,eutectic,and hypereutectic alloys,respectively.By decreasing the geometrical modulus of the solidifying section(increasing cooling rate),remarkable grain refinement,refining the dendrite arm spacing(DAS),and modification of Mg_(2)Si particles were achieved.Moreover,the grain size was refined via Si addition in the hypoeutectic range,while coarsening of grain size at high Si concentrations was observed.The results of shear punch testing and hardness measurements demonstrated that the ultimate shear strength(USS)and hardness increased by increasing the cooling rate during solidification.Moreover,Si addition generally improved hardness,while the highest USS level was achieved for the eutectic alloy due to the fine grain size and strengthening effect of the eutectic constituent.However,regarding the hypereutectic Mg-3Si alloy that exhibited high hardness,the shear properties were inferior due to the detrimental effect of the primary Mg_(2)Si particles.Finally,the results were discussed with consideration of the relationship between strength and hardness,for which the critical effect of Si was clarified.
基金support from the Contract Research(“Development of Breathable Fabrics with Nano-Electrospun Membrane”,CityU ref.:9231419“Research and application of antibacterial and healing-promoting smart nanofiber dressing for children’s burn wounds”,CityU ref:PJ9240111)+1 种基金the National Natural Science Foundation of China(“Study of Multi-Responsive Shape Memory Polyurethane Nanocomposites Inspired by Natural Fibers”,Grant No.51673162)Startup Grant of CityU(“Laboratory of Wearable Materials for Healthcare”,Grant No.9380116).
文摘Radiative cooling systems(RCSs)possess the distinctive capability to dissipate heat energy via solar and thermal radiation,making them suitable for thermal regulation and energy conservation applications,essential for mitigating the energy crisis.A comprehensive review connecting the advancements in engineered radiative cooling systems(ERCSs),encompassing material and structural design as well as thermal and energy-related applications,is currently absent.Herein,this review begins with a concise summary of the essential concepts of ERCSs,followed by an introduction to engineered materials and structures,containing nature-inspired designs,chromatic materials,meta-structural configurations,and multilayered constructions.It subsequently encapsulates the primary applications,including thermal-regulating textiles and energy-saving devices.Next,it highlights the challenges of ERCSs,including maximized thermoregulatory effects,environmental adaptability,scalability and sustainability,and interdisciplinary integration.It seeks to offer direction for forthcoming fundamental research and industrial advancement of radiative cooling systems in real-world applications.
基金supported by grants from the National Natural Science Foundation of China(no.62175248,U24A2061)Shanghai Science and Technology Funds(no.23ZR1481900,25ZR1401373)Science Foundation for Youth Scholar of State Key Laboratory of High Performance Ceramics and Superfine Microstructures(no.SKL202202).
文摘The promising prospects for all-day building thermal management are driving widespread research into spectrally selective manipulation materials.This article first summarizes the evolution path of metal reversible deposition technology,noting its advantages of cost-effectiveness and scientific rigor.It then highlights the groundbreaking work by Wang et al.(published in ACS Energy Letters,2025,10,3231)on coupling metastructured photothermal conversion electrodes and reversible Cu deposition for all-day energy management.Finally,the commercial viability of Wang et al.'s approach for building energy saving and its potential applicability to other scenarios are elaborated.
文摘With the rapid growth of cloud computing,the number of data centers(DCs)continuously increases,leading to a high-energy consumption dilemma.Cooling,apart from IT equipment,represents the largest energy consumption in DCs.Passive design(PD)and active design(AD)are two important approaches in architectural design to reduce energy consumption.However,for DC cooling,few studies have summarized AD,and there are almost no studies on PD.Based on existing international research(2005-2024),this paper summarizes the current state of cooling strategies for DCs.PD encompasses floors,ceilings,and layout and zoning of racks.Additionally,other passive strategies not yet studied in DCs are critically examined.AD includes air,liquid,free,and two-phase cooling.This paper systematically compares the performance of different AD technologies on various KPIs,including energy,economic,and environmental indicators.This paper also explores the application of different cooling design strategies through best-practice examples and presents advanced algorithms for energy management in operational DCs.This study reveals that free cooling is widely employed,with Artificial Neural Networks emerging as the most popular algorithm for managing cooling energy.Finally,this paper suggests four future directions for reducing cooling energy in DCs,with a focus on the development of passive strategies.This paper provides an overview and guide to DC energy-consumption issues,emphasizes the importance of implementing passive and active design strategies to reduce DC cooling energy consumption,and provides directions and references for future energy-efficient DC designs.
基金National Natural Science Foundation of China,Grant/Award Number:52104120Hunan Provincial Key Laboratory of Key Technology on Hydropower Development,Grant/Award Number:PKLHD202303。
文摘During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study investigates the coupled thermo-mechanical behavior of granite during heating and cooling through a combination of laboratory tests and finite difference method analysis.Initial investigations involve X-ray diffraction,thermal expansion test,thermogravimetric analysis,and uniaxial compression test.Results show the significant variations of granite properties under different thermal conditions,attributed to temperature gradients,water evaporation,and mineral phase transitions.Subsequently,a model considering temperature-dependent parameters and real-time cooling rates was employed to simulate linear heating and nonlinear cooling processes.Simulation results indicate that the thermal cracking predominantly occurs during the heating stage,with tensile failure as the primary mode.Additionally,a faster real-time cooling rate at higher temperatures intensifies the thermal cracking behavior in granite.This study effectively elucidates the thermomechanical coupling behavior of granite during heating and cooling processes,providing insights into the mechanisms of mechanical property changes with rising or decreasing temperatures.
基金Project supported by the National Natural Science Foundation of China(Grant No.62471180)。
文摘We propose a novel cooling protocol within a triple-Laguerre-Gaussian cavity optomechanical system,which is designed to suppress the thermal vibrations of a rotating mirror to reach its quantum ground state.The system incorporates two auxiliary cavities and an atomic ensemble coupled to a Laguerre-Gaussian rotational cavity.By carefully selecting system parameters,the cooling process of the rotating mirror is significantly enhanced,while the heating process is effectively suppressed,enabling efficient ground-state cooling even in the unresolved sideband regime.Compared to previous works,our scheme reduces the stringent restrictions on auxiliary systems,making it more experimentally feasible under broader parameter conditions.These findings provide a robust approach for achieving ground-state cooling in mechanical resonators.
基金supported by the Taishan Scholars of Shandong Province(tsqn202408151)the National Natural Science Foundation of China(Grant Nos.52476067,52306078,and 52576053).
文摘As an emerging thermal management strategy,dynamic radiative cooling(DRC)technology enables dynamic modulation of spectral radiation properties under varying environmental conditions through the directional design of material spectral characteristics.However,a comprehensive review of the basic physical mechanisms of radiative heat transfer in DRC materials and various design principles involved in dynamic radiative thermal regulation is still lacking.This review systematically summarizes recent advances in this field,spanning from fundamental physical principles to intrinsic molecular and electronic mechanisms,and further to representative material systems and multi-band regulation strategies,highlighting the interdisciplinary research achievements and technological innovations.This work outlines the core mechanisms governing the regulation of different spectral bands during radiative heat transfer processes.Then,the main categories of DRC materials are systematically reviewed,including actively responsive structures,passively responsive structures,and multi-stimuli-responsive materials.Furthermore,the challenges faced by current DRC technology and future development trends are summarized and discussed,providing valuable reference and guidance for further research in this field.Although DRC technologies still face significant challenges in material stability,manufacturing processes,and system integration,the continuous advances in related areas and multifunctional materials are expected to broaden the application prospects of DRC in the future.
基金supported by the National Natural Science Foundation of China(Grant No.52476206)the Key R&D Program of Shandong Province,China(Grant No.2025CXGC010203)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(Grant No.2025A1515012123)the Shandong Natural Science Foundation(Grant No.ZR2022ME008).
文摘This study aims to mitigate crosswind-induced performance degradation in Natural Draft Dry Cooling Towers used in power plants by developing and assessing windbreak configurations that enhance ventilation while minimizing additional airflow resistance.Three novel windbreak designs,namely single-windbreak configuration with curved profile,double-windbreak configuration with curved profile,and double-windbreak configuration with inverted curved profile,are proposed accordingly and evaluated against conventional solutions.Three-dimensional numerical models of a 120 m high NDDCT equipped with these windbreaks,together with a conventional Y-shaped windbreak,are developed for systematic comparison.The results demonstrate that windbreak effectiveness strongly depends on crosswind intensity.At low crosswind speeds of 0-6 m/s,the Y-shaped windbreak provides the greatest enhancement,increasing the ventilation rate by 25.45%and the heat rejection rate by 21.37%at 6 m/s compared with the no-windbreak configuration.In contrast,under moderate to strong crosswinds of 6-18 m/s,the single-windbreak configuration with curved profile exhibits superior performance.At 18 m/s,it increases the ventilation rate by 148.88%and the heat rejection rate by 79.74%relative to the baseline case,outperforming the Y-shaped windbreak by 26.59%in ventilation rate and 17.01%in heat rejection capacity.Analysis of airflow structure,temperature fields,and velocity distributions confirms that the single-windbreak configuration with curved profile more effectively suppresses crosswind penetration and promotes stable upward airflow at higher wind speeds.Based on a comprehensive assessment of aerodynamic and thermal performance,the Y-shaped windbreak is recommended for regions where crosswind speeds remain below 6 m/s,whereas the single-windbreak configuration with curved profile is preferable for sites exposed to stronger crosswinds exceeding this threshold.
基金supported by the National Natural Science Foundation of China(52473033)。
文摘The operational temperature rise of photovoltaic(PV)panels reduces their power generation efficiency and shortens their lifespan.Hygroscopic hydrogel-based evaporative cooling technology provides a promising solution for PV cooling due to high-enthalpy water evaporation.However,current hydrogels remain plagued by cooling interface mismatch and environmental concerns,which limit their practical implementation.Herein,a“green”and self-adhesive hygroscopic hydrogel consisting only of cheap lotus root powder and LiCl is designed,which can form robust interfacial adhesion with PV panels for efficient and durable cooling.Leveraging its compelling hygroscopicity,the hydrogel is able to rapidly capture moisture to recover cooling capacity,thus achieving self-sustained cooling.Besides,the“salting-in”effect brought by LiCl endows the hydrogel with notable softness and self-adhesiveness,which enables it to tightly combine with PV panels to optimize heat conduction and improve cooling efficiency.As a result,under 1.0 kW m^(-2)illumination,a PV temperature drop of 18.2℃ and a cooling power of 358 W m^(-2)were delivered by attaching the hydrogel to the rear of the PV panel,accompanied by a 7.7%improvement in energy efficiency.Overall,this self-sustained passive cooling strategy,activated by the all-natural hydrogel,sheds light on the development of PV thermal management.
文摘Urban Heat Island(UHI)effects are exacerbated by the expansion of impervious surfaces and loss of vegetation in urban centers,leading to elevated air and surface temperatures and reduced thermal comfort.Urban trees,through shading and evapotranspiration,are among the most effective Nature-based Solutions(NbS)for passive cooling.This study assesses the cooling potential of selected tree species by analyzing their morphological and physiological traits using a combination of ENVI-met microclimate simulations and multiple regression modeling.A total of 15 urban tree species were selected from the literature and analyzed based on their dependency of their cooling efficacy.Later validated in urban setting by Envi-met simulations.Key traits,such as Leaf Area Index(LAI),canopy density,transpiration rate,tree height,rooting depth,and water availability,were analyzed.Multiple linear regression analysis was conducted to quantify the contribution of each trait to ambient temperature reduction.Results revealed that LAI(R^(2)=0.76,p<0.001)and transpiration rate(R^(2)=0.71,p<0.001)were the most significant predictors of daytime cooling,while canopy openness and tree height were more strongly correlated with nighttime heat dissipation.High-performing species,such as Ficus benghalensis,Azadirachta indica,and Samanea saman,demonstrated a maximum temperature reduction of 2.5-4.2℃,especially in compact,low-rise,and mid-rise zones.The study provides a quantitative trait-based framework for tree selection in urban greening initiatives and offers evidence to guide landscape planning and UHI mitigation strategies through scientifically informed plantation design.
基金financial support for this work provided by the China Baowu Low Carbon Metallurgy Innovation Foundation(BWLCF202307)Basic Research Fund for Scientific Research and Development of Zhongye Changtian(2022JCYJ16).
文摘A sintering double-stage cooling unit(SDCU)was proposed to address the issues of material segregation and unclear particle motion mechanisms in the sintered ore vertical cooler as well as the low efficiency of energy recovery in the circular recirculating cooler(CRC).The proposed SDCU improves traditional waste heat recovery and enhances steady-state heat transfer efficiency under gas–solid conditions.Comparative analyses of exergy and exergy efficiency between the SDCU and CRC were presented.The effects of key parameters,including the gas–solid volume-to-mass ratio,inlet air temperature,and inlet sinter temperature,on system performance were examined.Furthermore,the integration of the SDCU with Joule-Brayton cycle-based phase-change thermal energy storage and supercritical CO_(2) Brayton cycle systems was explored.The results indicate that the SDCU outperforms the CRC in exergy recovery and efficiency by 6.73%and 6.26%,respectively.The optimal gas–solid mass ratio in the recirculating cooling unit is 1.08 m^(3)/kg,leading to improvements in SDCU exergy by 2.1 and 2.3 GJ/h for every 10 K increase in inlet ore and air temperatures,respectively.The phase-change thermal energy storage system stores 423.7 kW of thermal energy,while the supercritical CO_(2) system recovers 12.2 MW of thermal energy.
文摘Correction to:Nuclear Science and Techniques(2025)36:111 https://doi.org/10.1007/s41365-025-01681-9.In the sentence beginning‘The weights of the parameters used for the…’in this article,the text‘RCSs’should have read‘SCRs’.In Table 7 of this article,the column header ρ_fuel was incorrect and should have read CPv_fuel.For completeness and transparency,the old incorrect version and the corrected version of Table 7 are displayed below.
基金supported by the National Natural Science Foundation of China(Nos.52275299,52105313)R&D Program of Beijing Municipal Education Commission(No.KM202210005036)+1 种基金Natural Science Foundation of Chongqing,China(No.CSTB2023NSCQ-MSX0701)National Defense Basic Research Projects of China(No.JCKY2022405C002).
文摘Friction rolling additive manufacturing(FRAM)is a solid-state additive manufacturing technology that plasticizes the feed and deposits a material using frictional heat generated by the tool head.The thermal efficiency of FRAM,which depends only on friction to generate heat,is low,and the thermal-accumulation effect of the deposition process must be addressed.An FRAM heat-balance-control method that combines plasma-arc preheating and instant water cooling(PC-FRAM)is devised in this study,and a temperature field featuring rapidly increasing and decreasing temperature is constructed around the tool head.Additionally,2195-T87 Al-Li alloy is used as the feed material,and the effects of heating and cooling rates on the microstructure and mechanical properties are investigated.The results show that water cooling significantly improves heat accumulation during the deposition process.The cooling rate increases by 11.7 times,and the high-temperature residence time decreases by more than 50%.The grain size of the PC-FRAM sample is the smallest,i.e.,3.77±1.03μm,its dislocation density is the highest,and the number density of precipitates is the highest,the size of precipitates is the smallest,which shows the best precipitation-strengthening effect.The hardness test results are consistent with the precipitation distribution.The ultimate tensile strength,yield strength and elongation of the PC-FRAM samples are the highest(351±15.6 MPa,251.3±15.8 MPa and 16.25%±1.25%,respectively)among the samples investigated.The preheating and water-cooling-assisted deposition simultaneously increases the tensile strength and elongation of the deposited samples.The combination of preheating and instant cooling improves the deposition efficiency of FRAM and weakens the thermal-softening effect.
