The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Ol...The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping faulting monoclines which are made up of Paleocene-Pliocene sediments. Geological analysis and cross-section restoration revealed that the salt nappes were mainly formed at the late Himalayan stage (c.a. 1.64 Ma BP) and have been active until the present day. Because of inhomogeneous thrusting, a great difference may exist in thrust displacement, thrust occurrence, superimposition of allochthonous and autochthonous sequences and the development of the salt-related structures, which indicates the segmentation along the salt nappes. Regional compression, gravitational gliding and spreading controlled the formation and evolution of the salt nappe complex in the Kuqa foreland fold belt.展开更多
The eastern Sichuan-western Hunan and Hubei belt(ESWHHB) is an important fold-thrust belt in the Middle–Upper Yangtze region of China, and it is also an important area for petroleum and gas prospect in China. The inf...The eastern Sichuan-western Hunan and Hubei belt(ESWHHB) is an important fold-thrust belt in the Middle–Upper Yangtze region of China, and it is also an important area for petroleum and gas prospect in China. The influence of mechanical stratigraphy on the deformation evolution of the ESWHHB is a hot problem that has received widespread attention. However, due to the complexity of geological conditions, this issue has not been sufficiently addressed. Previews geological exploration studies show that the deformation evolution of the belt is closely related to the mechanical stratigraphy. Physical simulation has proven to be effective for studying the deformation evolution of fold-and-thrust belt. Based on the geological conditions of the ESWHHB, six groups of physical models were designed to analyze the influences of the ductile layer and overlap configuration on the structural deformation of the ESWHHB. The results show that the mechanical stratigraphy has significant control on the deformation evolution of the fold-thrust belt. The ESWHHB evolution is related to the lower viscosity of the ductile layer and the larger thickness of the ductile layer, while only gradual propagated fold-and-thrust belt can be resulted from the higher viscosity of the ductile layer and the smaller thickness of the ductile layer. Additionally, the overlap between the stratigraphy at various structural belts leads to significant differences in their mechanical properties, and it critically influences the structural patterns of the ESWHHB.展开更多
Apatite fission-track dating and thermal-history modeling were carried out on samples from the Dabashan （大巴山）, a fold-thrust belt, northeast of the Sichuan （四川） Basin and east of the Tibetan Plateau. A first ...Apatite fission-track dating and thermal-history modeling were carried out on samples from the Dabashan （大巴山）, a fold-thrust belt, northeast of the Sichuan （四川） Basin and east of the Tibetan Plateau. A first cooling event in the Late Cretaceous is followed by a prolonged period of ther- mal stability with exhumation rates of 〈0.025 mm/a, as determined from age vs. elevation relationships. The preservation of age vs. elevations relationships and the lack of distinct age changes across tectonic structures indicate that the Dabashan fold-thrust belt formed prior to the Late Cretaceous, consistent with the current view of Triassic-Early Cretaceous shortening. Relatively short mean track lengths （-12 μm） indicate that the samples remained in the partial annealing zone for a prolonged time. The knick points in the best-fitting temperature-time models suggest that the onset of late-stage accelerated cooling commenced at 〈11 Ma. Related exhumation rates are 0.3-0.2 mm/a assuming geothermal gra- dients of 20 and 30 ℃/km. We speculate that this late-stage event results from eastward growth of the Tibetan Plateau and overstepping of the Sichuan Basin, it is likely responsible for the youthful mor- phology of the Dabashan.展开更多
The map expression of ＂abrupt＂ changes in lateral stratigraphic level of a thrust fault has been traditionally interpreted to be a result of the presence of （1） a lateral （or oblique） thrust-ramp, or （2） a fro...The map expression of ＂abrupt＂ changes in lateral stratigraphic level of a thrust fault has been traditionally interpreted to be a result of the presence of （1） a lateral （or oblique） thrust-ramp, or （2） a frontal ramp with displacement gradient, and/or （3） a combination of these geometries. These geometries have been used to interpret the structures near transverse zones in fold-thrust belts （FTB）. This contribution outlines an alternative explanation that can result in the same map pattern by lateral variations in stratigraphy along the strike of a low angle thrust fault. We describe the natural example of the Leamington transverse zone, which marks the southern margin of the Pennsylvanian-Permian Oquirrh basin with genetically related lateral stratigraphic variations in the North American Sevier FTB. Thus, the observed map pattern at this zone is closely related to lateral stratigraphic variations along the strike of a horizontal fault. Even though the present-day erosional level shows the map pattern that could be interpreted as a lateral ramp, the observed structures along the Leamington zone most likely share the effects of the presence of a lateral （or oblique） ramp, lateral stratigraphic variations along the fault trace, and the displacement gradient.展开更多
Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the pote...Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the potential hydrocarbon exploration areas in deep layers.During key tectonic periods,the southwestern Sichuan fold-thrust belt developed some characteristic strata and structural deformation features,including the Pre-Sinian multi-row N-S strike rifts,step-shaped platform-margin structures of Sinian Dengying Formation,the western paleo-uplift in the early stage of Late Paleozoic,the Late Paleozoic–Middle Triassic carbonate platform,foreland slope and forebulge during Late Triassic to Cretaceous,and Cenozoic multi-strike rejuvenated fold-thrusting structures.The fold-thrust belt vertically shows a double-layer structural deformation controlled by the salt layer in the Middle Triassic Leikoupo Formation and the base detachment layer at present.The upper deformation layer develops the NE-SW strike thrusts propagating toward basin in long distance,while the deeper deformation layer had near north-south strike basement-involved folds,which deformed the detachment and thrusting structures formed earlier in the upper layer,with the deformation strength high in south part and weak in north part.The southern part of the fold-thrust belt is characterized by basement-involved fold-thrusts formed late,while the central-northern part is dominated by thin-skin thrusts in the shallow layer.The Wuzhongshan anticlinal belt near piedmont is characterized by over-thrust structure above the salt detachment,where the upper over-thrusting nappe consists of a complicated fold core and front limb of a fault-bend fold,while the deep layer has stable subtle in-situ structures.Favorable exploration strata and areas have been identified both in the upper and deeper deformation layers separated by regional salt detachment,wherein multiple anticlinal structures are targets for exploration.Other potential exploration strata and areas in southwestern Sichuan fold-thrust belt include the deep Sinian and Permian in the Wuzhongshan structure,pre-Sinian rifting sequences and related structures,platform-margin belt of Sinian Dengying Formation,and Indosinian paleo-uplift in the east of the Longquanshan structure.展开更多
The evolution of the Tarim southwest depression lying at the piedmont of the West Kunlun orogen differs completely from the evolution of the main part of Tarim basin after Later Palaeozoic because the former strongly ...The evolution of the Tarim southwest depression lying at the piedmont of the West Kunlun orogen differs completely from the evolution of the main part of Tarim basin after Later Palaeozoic because the former strongly subsides many times.. Subsidence is related closely to the West Kunlun fold thrust\|belt, thus the evolution of the Depression and the fold\|thrust\|belt reflects clearly the formation and evolution of the West Kunlun and even the Tibet.1 Evolution of the West Kunlun fold\|thrust\|belt\;Thrusting of the fold\|thrust\|belt can be classified into three stages:(1) Devonian thrusting:This is the oldest thrusting distinguished in the northern margin of the West Kunlun while the Silurian—Devonian thrusting was discriminated a few years ago by seismic data in the northern part of the East Kunlun. The Devonian thrusting is proved by the Upper Devonian dynamometamorphic rocks outcropping at the core of the anticline in the Sangzhu lying at the fold\|thrust\|belt. The rocks consist of slightly metamorphic clastic rock and have always been regarded as the Mid\|Proterozoic strata. But they are actually Upper Devonian strata according to the amount of perfect plant fossils that we found recently in the metamorphic rock, and they are overburdened `with an angular unconformity by another reliable Upper\|Devonian conglomerate in the core of the Aqike anticline. A possible explanation for this and its limited lined distribution parallel to the West Kunlun orogen is that they are subjected to metamorphism during the Later Devonian thrusting.展开更多
A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, s...A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, satellite images and field reconnaissance. Besides validation and modification of the cross-section, restoration allows better understanding of the geology, structural style and stratigraphy of the Zagros basin. In the area of interest, the Hormuz basal decollement and the Gachsaran detachment play the most significant roles in the structural style and deformation of the Zagros belt. More complexity is associated with interval decollements such as Triassic evaporites, Albian shales and Eocene marls. A variety of lithotectonic units and detachment surfaces confound any estimation of shortening, which generally decreases with increasing depth. Deformation completely differs in the Abadan Plain, Dezful Embayment and Izeh Zone because of different sedimentation histories and tectonic evolution; gentle and young structures can be interpreted as pre-collisional structures of the Dezful Embayment before the Late Cretaceous. After the Late Cretaceous, the Mountain Front Fault is the main control of sedimentation and deformation in the Zagros Basin, and this completely characterizes fold style and geometry within the Dezful Embayment and the Izeh Zone.展开更多
Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth ...Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth and expansion of the Qinghai-Tibetan Plateau.Since nearly 10 Ma,some significant and typical fold thrust belt have been formed.The spatial-temporal evolution of these fold-thrust belts and the characteristics of surface deformations are significant issues in geodynamics.In this paper,we use the elastoplastic finite element model with considering the contact nonlinearity to study the spatialtemporal evolution of the fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau,with particular attention to the details of the relationship between the depth and the shallow,the spatialtemporal order,and the characteristics of the surface deformation,etc.,in order to make a relatively complete mechanical interpretation of the spatial-temporal evolution of the foldthrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau from the perspective of geodynamics.展开更多
The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of ...The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and pe-troleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the pa-leo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.展开更多
Many previous studies of Meishan, Changxing, have been made on paleontology,sedimentology and paleomagnetism, and less on the deformational characteristics.The authors’ recent work indicates that the region is charac...Many previous studies of Meishan, Changxing, have been made on paleontology,sedimentology and paleomagnetism, and less on the deformational characteristics.The authors’ recent work indicates that the region is characterized by fold-thrust structural style. Since the type section of the Upper Permian Changxing Formation （P<sub>2</sub>ch） was proposed to be established in Meishan, Changxing by many geologists, this note documents the field features of the fold-thrust structural style, as well as its influence on type section of the Upper Permian Changxing Formation.展开更多
基金This research received financial supports from the National Natural Science Foundation of China(grant 40172076)the National Major Fundamental Research and Development Project(grant G1999043305)the National Key Project of the Ninth Five—Year Plan(grant 99—1111)
文摘The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping faulting monoclines which are made up of Paleocene-Pliocene sediments. Geological analysis and cross-section restoration revealed that the salt nappes were mainly formed at the late Himalayan stage (c.a. 1.64 Ma BP) and have been active until the present day. Because of inhomogeneous thrusting, a great difference may exist in thrust displacement, thrust occurrence, superimposition of allochthonous and autochthonous sequences and the development of the salt-related structures, which indicates the segmentation along the salt nappes. Regional compression, gravitational gliding and spreading controlled the formation and evolution of the salt nappe complex in the Kuqa foreland fold belt.
基金supported by Project of the State Key Laboratory of Petroleum Resource and Prospecting,China University of PetroleumBeijing (No. PRP/Open-1903)the Zunyi Normal University Project (No. BS201804)。
文摘The eastern Sichuan-western Hunan and Hubei belt(ESWHHB) is an important fold-thrust belt in the Middle–Upper Yangtze region of China, and it is also an important area for petroleum and gas prospect in China. The influence of mechanical stratigraphy on the deformation evolution of the ESWHHB is a hot problem that has received widespread attention. However, due to the complexity of geological conditions, this issue has not been sufficiently addressed. Previews geological exploration studies show that the deformation evolution of the belt is closely related to the mechanical stratigraphy. Physical simulation has proven to be effective for studying the deformation evolution of fold-and-thrust belt. Based on the geological conditions of the ESWHHB, six groups of physical models were designed to analyze the influences of the ductile layer and overlap configuration on the structural deformation of the ESWHHB. The results show that the mechanical stratigraphy has significant control on the deformation evolution of the fold-thrust belt. The ESWHHB evolution is related to the lower viscosity of the ductile layer and the larger thickness of the ductile layer, while only gradual propagated fold-and-thrust belt can be resulted from the higher viscosity of the ductile layer and the smaller thickness of the ductile layer. Additionally, the overlap between the stratigraphy at various structural belts leads to significant differences in their mechanical properties, and it critically influences the structural patterns of the ESWHHB.
基金supported by the National Natural Science Foundation of China (No. 40902038)the Petro China Innova-tion Foundation (No. 2009D-5006-01-08)the Project of China Geological Survey (No. 12120113094200)
文摘Apatite fission-track dating and thermal-history modeling were carried out on samples from the Dabashan （大巴山）, a fold-thrust belt, northeast of the Sichuan （四川） Basin and east of the Tibetan Plateau. A first cooling event in the Late Cretaceous is followed by a prolonged period of ther- mal stability with exhumation rates of 〈0.025 mm/a, as determined from age vs. elevation relationships. The preservation of age vs. elevations relationships and the lack of distinct age changes across tectonic structures indicate that the Dabashan fold-thrust belt formed prior to the Late Cretaceous, consistent with the current view of Triassic-Early Cretaceous shortening. Relatively short mean track lengths （-12 μm） indicate that the samples remained in the partial annealing zone for a prolonged time. The knick points in the best-fitting temperature-time models suggest that the onset of late-stage accelerated cooling commenced at 〈11 Ma. Related exhumation rates are 0.3-0.2 mm/a assuming geothermal gra- dients of 20 and 30 ℃/km. We speculate that this late-stage event results from eastward growth of the Tibetan Plateau and overstepping of the Sichuan Basin, it is likely responsible for the youthful mor- phology of the Dabashan.
基金supported by MLTM of Korean Government Program 20052004 to S.Kwon
文摘The map expression of ＂abrupt＂ changes in lateral stratigraphic level of a thrust fault has been traditionally interpreted to be a result of the presence of （1） a lateral （or oblique） thrust-ramp, or （2） a frontal ramp with displacement gradient, and/or （3） a combination of these geometries. These geometries have been used to interpret the structures near transverse zones in fold-thrust belts （FTB）. This contribution outlines an alternative explanation that can result in the same map pattern by lateral variations in stratigraphy along the strike of a low angle thrust fault. We describe the natural example of the Leamington transverse zone, which marks the southern margin of the Pennsylvanian-Permian Oquirrh basin with genetically related lateral stratigraphic variations in the North American Sevier FTB. Thus, the observed map pattern at this zone is closely related to lateral stratigraphic variations along the strike of a horizontal fault. Even though the present-day erosional level shows the map pattern that could be interpreted as a lateral ramp, the observed structures along the Leamington zone most likely share the effects of the presence of a lateral （or oblique） ramp, lateral stratigraphic variations along the fault trace, and the displacement gradient.
基金Supported by the Petro China Science and Technology Project(2016E-0601,2019B-0503)China National Science and Technology Major Project(2016ZX05003-001)
文摘Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the potential hydrocarbon exploration areas in deep layers.During key tectonic periods,the southwestern Sichuan fold-thrust belt developed some characteristic strata and structural deformation features,including the Pre-Sinian multi-row N-S strike rifts,step-shaped platform-margin structures of Sinian Dengying Formation,the western paleo-uplift in the early stage of Late Paleozoic,the Late Paleozoic–Middle Triassic carbonate platform,foreland slope and forebulge during Late Triassic to Cretaceous,and Cenozoic multi-strike rejuvenated fold-thrusting structures.The fold-thrust belt vertically shows a double-layer structural deformation controlled by the salt layer in the Middle Triassic Leikoupo Formation and the base detachment layer at present.The upper deformation layer develops the NE-SW strike thrusts propagating toward basin in long distance,while the deeper deformation layer had near north-south strike basement-involved folds,which deformed the detachment and thrusting structures formed earlier in the upper layer,with the deformation strength high in south part and weak in north part.The southern part of the fold-thrust belt is characterized by basement-involved fold-thrusts formed late,while the central-northern part is dominated by thin-skin thrusts in the shallow layer.The Wuzhongshan anticlinal belt near piedmont is characterized by over-thrust structure above the salt detachment,where the upper over-thrusting nappe consists of a complicated fold core and front limb of a fault-bend fold,while the deep layer has stable subtle in-situ structures.Favorable exploration strata and areas have been identified both in the upper and deeper deformation layers separated by regional salt detachment,wherein multiple anticlinal structures are targets for exploration.Other potential exploration strata and areas in southwestern Sichuan fold-thrust belt include the deep Sinian and Permian in the Wuzhongshan structure,pre-Sinian rifting sequences and related structures,platform-margin belt of Sinian Dengying Formation,and Indosinian paleo-uplift in the east of the Longquanshan structure.
文摘The evolution of the Tarim southwest depression lying at the piedmont of the West Kunlun orogen differs completely from the evolution of the main part of Tarim basin after Later Palaeozoic because the former strongly subsides many times.. Subsidence is related closely to the West Kunlun fold thrust\|belt, thus the evolution of the Depression and the fold\|thrust\|belt reflects clearly the formation and evolution of the West Kunlun and even the Tibet.1 Evolution of the West Kunlun fold\|thrust\|belt\;Thrusting of the fold\|thrust\|belt can be classified into three stages:(1) Devonian thrusting:This is the oldest thrusting distinguished in the northern margin of the West Kunlun while the Silurian—Devonian thrusting was discriminated a few years ago by seismic data in the northern part of the East Kunlun. The Devonian thrusting is proved by the Upper Devonian dynamometamorphic rocks outcropping at the core of the anticline in the Sangzhu lying at the fold\|thrust\|belt. The rocks consist of slightly metamorphic clastic rock and have always been regarded as the Mid\|Proterozoic strata. But they are actually Upper Devonian strata according to the amount of perfect plant fossils that we found recently in the metamorphic rock, and they are overburdened `with an angular unconformity by another reliable Upper\|Devonian conglomerate in the core of the Aqike anticline. A possible explanation for this and its limited lined distribution parallel to the West Kunlun orogen is that they are subjected to metamorphism during the Later Devonian thrusting.
文摘A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, satellite images and field reconnaissance. Besides validation and modification of the cross-section, restoration allows better understanding of the geology, structural style and stratigraphy of the Zagros basin. In the area of interest, the Hormuz basal decollement and the Gachsaran detachment play the most significant roles in the structural style and deformation of the Zagros belt. More complexity is associated with interval decollements such as Triassic evaporites, Albian shales and Eocene marls. A variety of lithotectonic units and detachment surfaces confound any estimation of shortening, which generally decreases with increasing depth. Deformation completely differs in the Abadan Plain, Dezful Embayment and Izeh Zone because of different sedimentation histories and tectonic evolution; gentle and young structures can be interpreted as pre-collisional structures of the Dezful Embayment before the Late Cretaceous. After the Late Cretaceous, the Mountain Front Fault is the main control of sedimentation and deformation in the Zagros Basin, and this completely characterizes fold style and geometry within the Dezful Embayment and the Izeh Zone.
基金financially supported by the National Science Foundation of China(42074117)supported by the Fundamental Research Funds for the Central Universities。
文摘Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth and expansion of the Qinghai-Tibetan Plateau.Since nearly 10 Ma,some significant and typical fold thrust belt have been formed.The spatial-temporal evolution of these fold-thrust belts and the characteristics of surface deformations are significant issues in geodynamics.In this paper,we use the elastoplastic finite element model with considering the contact nonlinearity to study the spatialtemporal evolution of the fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau,with particular attention to the details of the relationship between the depth and the shallow,the spatialtemporal order,and the characteristics of the surface deformation,etc.,in order to make a relatively complete mechanical interpretation of the spatial-temporal evolution of the foldthrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau from the perspective of geodynamics.
文摘The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and pe-troleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the pa-leo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.
文摘Many previous studies of Meishan, Changxing, have been made on paleontology,sedimentology and paleomagnetism, and less on the deformational characteristics.The authors’ recent work indicates that the region is characterized by fold-thrust structural style. Since the type section of the Upper Permian Changxing Formation （P<sub>2</sub>ch） was proposed to be established in Meishan, Changxing by many geologists, this note documents the field features of the fold-thrust structural style, as well as its influence on type section of the Upper Permian Changxing Formation.
