This study utilizes a visualization nozzle and spray experimental platform to experimentally investigate the flow focusing/blurring nozzle.It is found that the working mode of the nozzle transitions from flow focusing...This study utilizes a visualization nozzle and spray experimental platform to experimentally investigate the flow focusing/blurring nozzle.It is found that the working mode of the nozzle transitions from flow focusing to flow transition and eventually to flow blurring as the gas flow rate increases or the tube hole distance decreases.Conversely,an increase in liquid flow rate only facilitates the transition from flow focusing to flow transition.Changes in the gas/liquid flow rate or tube hole distance influence the gas shear effect and the gas inertial impact effect inside the nozzle,which in turn alters the working mode.An increase in gas flow rate results in a shift of the droplet size distribution towards smaller particle sizes in the flow blurring mode,whereas an increase in liquid flow rate produces the opposite effect.Notably,the impact of the gas flow rate on these changes is more pronounced than that of the liquid flow rate.展开更多
Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing...Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing.However,elastic coding lenses(ECLs)still suffer from low focusing performance,thickness comparable to wavelength,and frequency sensitivity.Here,we consider both the structural and material properties of the coding unit,thus realizing further compression of the thickness of the ECL.We chose the simplest ECL,which consists of only two encoding units.The coding unit 0 is a straight structure constructed using a carbon fiber reinforced composite material,and the coding unit 1 is a zigzag structure constructed using an aluminum material,and the thickness of the ECL constructed using them is only 1/8 of the wavelength.Based on the theoretical design,the arrangement of coding units is further optimized using genetic algorithms,which significantly improves the focusing performance of the lens at different focus and frequencies.This study provides a more effective way to control vibration and noise in advanced structures.展开更多
Shock wave focusing is an effective way to create a hot spot or a high-pressure and hightemperature region at a certain place,showing its unique usage in detonation initiation,which is beneficial for the development o...Shock wave focusing is an effective way to create a hot spot or a high-pressure and hightemperature region at a certain place,showing its unique usage in detonation initiation,which is beneficial for the development of detonation-based engines.The flame propagation behavior after the autoignition induced by shock wave focusing is crucial to the formation and self-sustaining of the detonation wave.In this study,wedge reflectors with two different angles(60°and 90°)and a planar reflector are employed,and the Mach number of incident shock waves ranging from 2.0 to 2.8 is utilized to trigger different flame propagation modes.Dynamic pressure transducers and the high-speed schlieren imaging system are both employed to investigate the shock-shock collision and ignition procedure.The results reveal a total of four flame propagation modes:deflagration,DDT(Deflagration-to-Detonation Transition),unsteady detonation,and direct detonation.The detonation wave formed in the DDT and unsteady detonation mode is only approximately 75%-85%of the Chapman-Jouguet(C-J)speed;meanwhile,the directly induced detonation wave speed is close to the C-J speed.Transverse waves,which are strong evidence for the existence of detonation waves,are discovered in experiments.The usage of wedge reflectors significantly reduces the initial pressure difference ratio needed for direct detonation ignition.We also provide a practical method for differentiating between detonation and deflagration modes,which involves contrasting the speed of the reflected shock wave with the speed of the theoretically nonreactive reflected shock wave.These findings should serve as a reference for the detonation initiation technique in advanced detonation propulsion engines.展开更多
Compressing all the energy of a laser pulse into a spatiotemporal focal cube edged by the laser center wavelength will realize the highest intensity of an ultra-intense ultrashort laser,which is called theλ^(3) regim...Compressing all the energy of a laser pulse into a spatiotemporal focal cube edged by the laser center wavelength will realize the highest intensity of an ultra-intense ultrashort laser,which is called theλ^(3) regime or theλ^(3) laser.Herein,we introduced a rotational hyperbolic mirror—an important rotational conic section mirror with two foci—that is used as a secondary focusing mirror after a rotational parabolic mirror to reduce the focal spot size from several wavelengths to a single wavelength by significantly increasing the focusing angular aperture.Compared with the rotational ellipsoidal mirror,the first focal spot with a high intensity,as well as some unwanted strong-field effects,is avoided.The optimal focusing condition of this method is presented and the enhanced tight focusing for a femtosecond petawatt laser and theλ3 laser is numerically simulated,which can enhance the focused intensities of ultra-intense ultrashort lasers for laser physics.展开更多
Parkinson’s disease(PD)was first described as a neurological disease by Dr.James Parkinson in 1817 as a“shaking palsy”.Since that time,much more is known about the pathophysiology of PD yet the disease is still unc...Parkinson’s disease(PD)was first described as a neurological disease by Dr.James Parkinson in 1817 as a“shaking palsy”.Since that time,much more is known about the pathophysiology of PD yet the disease is still uncurable.The hallmark of the disease is often considered Lewy body neural inclusions in the substantia nigra pars compacta and other brain areas,although not all patients have these inclusions.The patients exhibit massive neuronal cell loss in the substantia nigra pars compacta,which is associated with the motor symptoms of tremor,bradykinesia,rigidity,and postural instability.PD is the second most common neurodegenerative disease after Alzheimer’s disease with a prevalence of around 1%of individuals over the age of 60.展开更多
A numerical simulation of the toroidal shock wave focusing in a co-axial cylindrical shock tube is inves- tigated by using discontinuous Galerkin （DG） finite element method to solve the axisymmetric Euler equations....A numerical simulation of the toroidal shock wave focusing in a co-axial cylindrical shock tube is inves- tigated by using discontinuous Galerkin （DG） finite element method to solve the axisymmetric Euler equations. For validating the numerical method, the shock-tube problem with exact solution is computed, and the computed results agree well with the exact cases. Then, several cases with higher incident Mach numbers varying from 2.0 to 5.0 are simulated. Simulation results show that complicated flow-field structures of toroidal shock wave diffraction, reflection, and focusing in a co-axial cylindrical shock tube can be obtained at different incident Mach numbers and the numerical solutions appear steep gradients near the focusing point, which illustrates the DG method has higher accuracy and better resolution near the discontinuous point. Moreover, the focusing peak pres- sure with different grid scales is compared.展开更多
Computational simulations on structurally different detonation generator are carried out to study the phenomena,the mechanism and the gas dynamics characteristics of flame implosion and shock wave focusing.Two-dimensi...Computational simulations on structurally different detonation generator are carried out to study the phenomena,the mechanism and the gas dynamics characteristics of flame implosion and shock wave focusing.Two-dimensional axisymmetric and unsteady Navier-Stokes equations are numerically solved and detailed chemical reaction kinetics of hydrogen/air mixture is used.The simulation results show that the laminar flame generated by low energy spark in the jet flame burner is accelerated under the narrow channel,the jet flame impinging on the axis strengthens shock wave and the shock wave enhances flame acceleration.Under the function of multiple shock waves and flame,a number of hot spots appear between the wave and the surface.The spots enlarge rapidly,thus forming an over-drive detonation with high pressure,and then declining to stable detonation.Through calculation and analysis,the length of detonation initiation and stable detonation are obtained,thus providing the useful information for further experimental investigations.展开更多
We are pleased to announce that the Journal of Dermatologic Science and Cosmetic Technology,organized by the Guangdong Cosmetics Association,China and produced by KeAi(founded by China Science Publishing&Media Ltd...We are pleased to announce that the Journal of Dermatologic Science and Cosmetic Technology,organized by the Guangdong Cosmetics Association,China and produced by KeAi(founded by China Science Publishing&Media Ltd.and Elsevier),will be officially released online on the ScienceDirect platform.This journal will serve as a high-level,international,and interdisciplinary academic exchange platform in the fields of dermatologic science and cosmetic technology.Its aim is to publish relevant research findings in dermatologic science and innovative cosmetic technologies,provide a comprehensive understanding of future trends in the cosmetics industry,and promote international exchange and cooperation between dermatologic science and the cosmetics industry.展开更多
The acoustic focusing effect of metamaterial has a wide range of applications in medicine,acoustic imaging,signal detection,etc.This paper presents an acoustic metamaterial applied to the acoustic focusing effect.The ...The acoustic focusing effect of metamaterial has a wide range of applications in medicine,acoustic imaging,signal detection,etc.This paper presents an acoustic metamaterial applied to the acoustic focusing effect.The formation of acousticmetamaterial is designed into a cylindrical structure with three layers of ludox,cork and fluid rubber,which can produce a focusingphenomenon when acoustic waves propagate in air.For these strange phenomena,a scientific description is given theorietically.It can also be concluded that when the frequency of the incident acoustic wave increases?the number of peripheral bandsoutside the focusing poles will increase periodically.Besides,there are numerous groups of multipolar focusing phenomena inhigh frequency.The design of this acoustic metamaterial is successful through theorietical and experimental verification,therefore,it can be applied to acoustic communication and test.展开更多
On-chip focusing of plasmons in graded-index lenses is important for imaging,lithography,signal processing,and optical interconnects at the deep subwavelength nanoscale.However,owing to the inherent strong wavelength ...On-chip focusing of plasmons in graded-index lenses is important for imaging,lithography,signal processing,and optical interconnects at the deep subwavelength nanoscale.However,owing to the inherent strong wavelength dispersion of plasmonic materials,the on-chip focusing of plasmons suffers from severe chromatic aberrations.With the well-established planar dielectric grating,a graded-index waveguide array lens(GIWAL)is proposed to support the excitation and propagation of acoustic graphene plasmon polaritons(AGPPs)and to achieve the achromatic on-chip focusing of the AGPPs with a focus as small as about 2%of the operating wavelength in the frequency band from 10 to 20 THz,benefiting from the wavelength-independent index profile of the GIWAL.An analytical theory is provided to understand the on-chip focusing of the AGPPs and other beam evolution behaviors,such as self-focusing,self-collimation,and pendulum effects of Gaussian beams as well as spatial inversions of digital optical signals.Furthermore,the possibility of the GIWAL to invert spatially broadband digital optical signals is demonstrated,indicating the potential value of the GIWAL in broadband digital communication and signal processing.展开更多
We use feedback wavefront shaping technology to realize the multi-point uniform light focusing in three-dimensional(3D) space through scattering media only by loading the optimal mask once.General 3D spatial focusing ...We use feedback wavefront shaping technology to realize the multi-point uniform light focusing in three-dimensional(3D) space through scattering media only by loading the optimal mask once.General 3D spatial focusing needs to load the optimal mask multiple times to realize the spatial movement of the focal point and the uniformity of multi-point focusing cannot be guaranteed.First,we investigate the effects of speckle axial correlation and different axial distances on 3D spatial multi-point uniform focusing and propose possible solutions.Then we use our developed non-dominated sorting genetic algorithm suitable for 3D spatial focusing(S-NSGA) to verify the experiment of multi-point focusing in 3D space.This research is expected to have potential applications in the fields of optical manipulation and optogenetics.展开更多
An experimental scheme for the generation of directional focusing waves in a wave basin is established in this paper. The effects of the directional range, frequency width and center frequency on the wave focusing are...An experimental scheme for the generation of directional focusing waves in a wave basin is established in this paper. The effects of the directional range, frequency width and center frequency on the wave focusing are studied. The distribution of maximum amplitude and the evolution of time series and spectra during wave packet propagation and the variation of water surface parameters are extensively investigated. The results reveal that the characteristics of focusing waves are significantly influenced by wave directionality and that the breaking criteria for directional waves are distinctly different from those for unidirectional waves.展开更多
Four focusing models for generation of freak waves are presented. An extreme wave focusing model is presented on the basis of the enhanced High-Order Spectral （HOS） method and the importance of the nonlinear wave-wa...Four focusing models for generation of freak waves are presented. An extreme wave focusing model is presented on the basis of the enhanced High-Order Spectral （HOS） method and the importance of the nonlinear wave-wave interaction is evaluated by comparison of the calculated results with experimental and theoretical data. Based on the modification of the Longuet-Higgins model, four wave models for generation of freak waves （a. extreme wave model ＋ random wave model; b. extreme wave model ＋ regular wave model; e. phase interval modulation wave focusing model; d. number modulation wave focusing model with the same phase） are proposed. By use of different energy distribution techniques in the four models, freak wave events are obtained with different Hmax/Hs in finite space and time.展开更多
This paper presents a method for the automatic adjustment of the laser defocusing amount in micro-laser-induced breakdown spectroscopy. A microscopic optical imaging system consisting of a CCD camera and a 20× ob...This paper presents a method for the automatic adjustment of the laser defocusing amount in micro-laser-induced breakdown spectroscopy. A microscopic optical imaging system consisting of a CCD camera and a 20× objective lens was adopted to realize the method. The real-time auto-focusing of the system was achieved by detecting the effective pixels of the light spot generated by the laser pointer. The focusing accuracy of the method could achieve 3 μm. The element concentrations of Mn and Ni in low-alloy steels were analyzed at a crater diameter of about 35 μm using the presented method. After using the presented method, the determination coefficients of Mn and Ni both exceeded 0.997, with the root-mean-square errors being 0.0133 and 0.0395, respectively. Scanning analysis was performed on the inclined plane and the curved surface by means of focusing control and non-focusing control. Ten characteristic spectral lines of Fe were selected as the analysis lines. With the focusing control, the average relative standard deviations obtained on the inclined plane and curved surface were both less than 5%, and much less than the values without focusing control, 14.6% and 40.39%.展开更多
We demonstrate light focusing through scattering media by introducing particle swarm optimization for modulat- ing the phase wavefront. Light refocusing is simulated numerically based on the angular spectrum method an...We demonstrate light focusing through scattering media by introducing particle swarm optimization for modulat- ing the phase wavefront. Light refocusing is simulated numerically based on the angular spectrum method and the circular Gaussian distribution model of the scattering media. Experimentally, a spatial light modulator is used to control the phase of incident light, so as to make the scattered light converge to a focus. The influence of divided segments of input light and the effect of the number of iterations on light intensity enhancement are investigated. Simulation results are found to be in good agreement with the theoretical analysis for light refocusing.展开更多
The tight focusing properties of a radially polarized Gaussian beam with a nested pair of vortices having a radial wave front distribution are investigated theoretically by the vector diffraction theory. The results s...The tight focusing properties of a radially polarized Gaussian beam with a nested pair of vortices having a radial wave front distribution are investigated theoretically by the vector diffraction theory. The results show that the optical intensity in the focal region can be altered considerably by changing the location of the vortices nested in a radially polarized Gaussian beam. It is noted that focal evolution from one annular focal pattern to a highly confined focal spot in the transverse direction is observed corresponding to the change in the location of the optical vortices in the input plane. It is also observed that the generated focal hole or spot lead to a focal shift along the optical axis remarkably under proper radial phase modulation. Hence the proposed system may be applied to construct tunable optical traps for both high and low refractive index particles.展开更多
Two-dimensional focusing waves are generated and investigated by numerical method. The numerical model is developed by introducing the wave maker boundary on the high-order spectral （HOS） method proposed by Dommermu...Two-dimensional focusing waves are generated and investigated by numerical method. The numerical model is developed by introducing the wave maker boundary on the high-order spectral （HOS） method proposed by Dommermuth and Yue in 1987 and verified by theoretical and experimental data. Some cases of focusing waves considering different parameters such as assumed focusing amplitudes, frequency bandwidth, central frequency and frequency spectrum are generated. Characteristics of the focusing wave including surface elevations, the maximum crest, shift of focusing points and frequency spectra are discussed. The results show that the focusing wave characteristics are strongly affected by focusing amplitudes, frequency bandwidth, central frequency and frequency spectrum.展开更多
To improve the processing efficiency and extend the tuning range of 3D isotropic fabrication,we apply the simultaneous spatiotemporal focusing(SSTF)technique to a high-repetition-rate femtosecond(fs)fiber laser system...To improve the processing efficiency and extend the tuning range of 3D isotropic fabrication,we apply the simultaneous spatiotemporal focusing(SSTF)technique to a high-repetition-rate femtosecond(fs)fiber laser system.In the SSTF scheme,we propose a pulse compensation scheme for the fiber laser with a narrow spectral bandwidth by building an extra-cavity pulse stretcher.We further demonstrate truly 3D isotropic microfabrication in photosensitive glass with a tunable resolution ranging from 8μm to 22μm using the SSTF of fs laser pulses.Moreover,we systematically investigate the influences of pulse energy,writing speed,processing depth,and spherical aberration on the fabrication resolution.As a proof-of-concept demonstration,the SSTF scheme was further employed for the fs laser-assisted etching of complicated glass microfluidic structures with 3D uniform sizes.The developed technique can be extended to many applications such as advanced photonics,3D biomimetic printing,micro-electromechanical systems,and lab-on-a-chips.展开更多
A fully non-contact experimental platform for ultrasonic Lamb wave damage detection was constructed,where laser exciting and the scanning laser Doppler vibrometer were used to realize the high-resolution pickup of the...A fully non-contact experimental platform for ultrasonic Lamb wave damage detection was constructed,where laser exciting and the scanning laser Doppler vibrometer were used to realize the high-resolution pickup of the Lamb wave field in the structure,which has overcome the disadvantages of low spatial resolution caused by the conventional contact Lamb wave transducer.In order to suppress the dispersion effect of broadband laser-ultrasonic signal,we proposed time-domain filtering in multi-band method based on wavelet analysis to decompose the broadband signal into multiple narrowband ones and separate the scattering signals effectively without reference signal.On this basis,the total focusing method(TFM)was used for damage imaging.However,when the traditional TFM was applied to image based on ultrasonic Lamb wave,the inherent dispersion characteristic of ultrasonic Lamb wave could lead to the miscalculation of time delay,thus reducing the imaging precision.Therefore,the frequency-domain TFM was developed by applying phase delay in the frequency domain.The logical AND was introduced to synthesize the damage imaging results of multiple narrowband signals to obtain high-precision damage imaging.Our study has shown that the method of time-domain filtering in multi-band combining with frequency-domain TFM can realize non-contact and accurate damage detection in isotropic plate structures,and it is a potential effective method for application in engineering practice.展开更多
Full matrix focusing method of ultrasonic phased array has been proved with advantages of good signal-to-noise ratio and imaging resolution in the field of Ultrasonic NDT.However,it is still suffering from the time-co...Full matrix focusing method of ultrasonic phased array has been proved with advantages of good signal-to-noise ratio and imaging resolution in the field of Ultrasonic NDT.However,it is still suffering from the time-consuming data acquisition and processing.In order to solve the problem,two simplified matrix focusing methods are provided in the paper.One provided method is a triangular matrix focusing algorithm based on the principle of reciprocity for the multi-channel ultrasonic system.The other provided method is a trapezoidal matrix focusing algorithm based on the energy weight of the different channel to the focusing area.Time of data acquisition and computational is decreased with the provided simplified matrix focusing methods.In order to prove the validity of two provided algorithms,both side-drilled holes and oblique cracks are used for imaging experiments.The experimental results show that the imaging quality of the triangular matrix focusing algorithm is basically consistent to that of the full matrix focusing method.And imaging quality of the trapezoidal matrix focusing algorithm is slightly reduced with the amount of multi-channel data decreasing.Both data acquisition and computational efficiency using the triangular matrix focusing algorithm and the trapezoidal matrix focusing algorithm have been improved significantly compared with original full matrix focusing method.展开更多
基金the National Natural Science Foundation of China(52276026).
文摘This study utilizes a visualization nozzle and spray experimental platform to experimentally investigate the flow focusing/blurring nozzle.It is found that the working mode of the nozzle transitions from flow focusing to flow transition and eventually to flow blurring as the gas flow rate increases or the tube hole distance decreases.Conversely,an increase in liquid flow rate only facilitates the transition from flow focusing to flow transition.Changes in the gas/liquid flow rate or tube hole distance influence the gas shear effect and the gas inertial impact effect inside the nozzle,which in turn alters the working mode.An increase in gas flow rate results in a shift of the droplet size distribution towards smaller particle sizes in the flow blurring mode,whereas an increase in liquid flow rate produces the opposite effect.Notably,the impact of the gas flow rate on these changes is more pronounced than that of the liquid flow rate.
基金Project supported by the National Natural Science Foundation of China(Grant No.12404531)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province,China(Grant No.23KJB140011)。
文摘Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing.However,elastic coding lenses(ECLs)still suffer from low focusing performance,thickness comparable to wavelength,and frequency sensitivity.Here,we consider both the structural and material properties of the coding unit,thus realizing further compression of the thickness of the ECL.We chose the simplest ECL,which consists of only two encoding units.The coding unit 0 is a straight structure constructed using a carbon fiber reinforced composite material,and the coding unit 1 is a zigzag structure constructed using an aluminum material,and the thickness of the ECL constructed using them is only 1/8 of the wavelength.Based on the theoretical design,the arrangement of coding units is further optimized using genetic algorithms,which significantly improves the focusing performance of the lens at different focus and frequencies.This study provides a more effective way to control vibration and noise in advanced structures.
基金the financial support from the National Natural Science Foundation of China(No.12272234)the Innovation Program of Shanghai Municipal Education Commission,China(No.2023KEJI05-75)the Shanghai Science and Technology Planning Project,China(No.22190711500)。
文摘Shock wave focusing is an effective way to create a hot spot or a high-pressure and hightemperature region at a certain place,showing its unique usage in detonation initiation,which is beneficial for the development of detonation-based engines.The flame propagation behavior after the autoignition induced by shock wave focusing is crucial to the formation and self-sustaining of the detonation wave.In this study,wedge reflectors with two different angles(60°and 90°)and a planar reflector are employed,and the Mach number of incident shock waves ranging from 2.0 to 2.8 is utilized to trigger different flame propagation modes.Dynamic pressure transducers and the high-speed schlieren imaging system are both employed to investigate the shock-shock collision and ignition procedure.The results reveal a total of four flame propagation modes:deflagration,DDT(Deflagration-to-Detonation Transition),unsteady detonation,and direct detonation.The detonation wave formed in the DDT and unsteady detonation mode is only approximately 75%-85%of the Chapman-Jouguet(C-J)speed;meanwhile,the directly induced detonation wave speed is close to the C-J speed.Transverse waves,which are strong evidence for the existence of detonation waves,are discovered in experiments.The usage of wedge reflectors significantly reduces the initial pressure difference ratio needed for direct detonation ignition.We also provide a practical method for differentiating between detonation and deflagration modes,which involves contrasting the speed of the reflected shock wave with the speed of the theoretically nonreactive reflected shock wave.These findings should serve as a reference for the detonation initiation technique in advanced detonation propulsion engines.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1604401)the Shanghai Science and Technology Committee Program(Grant Nos.22560780100 and 23560750200)the National Natural Science Foundation of China(Grant No.61925507)。
文摘Compressing all the energy of a laser pulse into a spatiotemporal focal cube edged by the laser center wavelength will realize the highest intensity of an ultra-intense ultrashort laser,which is called theλ^(3) regime or theλ^(3) laser.Herein,we introduced a rotational hyperbolic mirror—an important rotational conic section mirror with two foci—that is used as a secondary focusing mirror after a rotational parabolic mirror to reduce the focal spot size from several wavelengths to a single wavelength by significantly increasing the focusing angular aperture.Compared with the rotational ellipsoidal mirror,the first focal spot with a high intensity,as well as some unwanted strong-field effects,is avoided.The optimal focusing condition of this method is presented and the enhanced tight focusing for a femtosecond petawatt laser and theλ3 laser is numerically simulated,which can enhance the focused intensities of ultra-intense ultrashort lasers for laser physics.
基金supported by the Israel Science Foundation(ISF grant 1994/21 and 3252/21)Zuckerman(Zuckerman STEM leadership program)(to SS).
文摘Parkinson’s disease(PD)was first described as a neurological disease by Dr.James Parkinson in 1817 as a“shaking palsy”.Since that time,much more is known about the pathophysiology of PD yet the disease is still uncurable.The hallmark of the disease is often considered Lewy body neural inclusions in the substantia nigra pars compacta and other brain areas,although not all patients have these inclusions.The patients exhibit massive neuronal cell loss in the substantia nigra pars compacta,which is associated with the motor symptoms of tremor,bradykinesia,rigidity,and postural instability.PD is the second most common neurodegenerative disease after Alzheimer’s disease with a prevalence of around 1%of individuals over the age of 60.
基金Supported by the National Natural Science Foundation of China(50976072,51106099,10902070)the Leading Academic Discipline Project of Shanghai Municipal Education Commission(J50501)the Science Foundation for the Excellent Youth Scholar of Higher Education of Shanghai(slg09003)~~
文摘A numerical simulation of the toroidal shock wave focusing in a co-axial cylindrical shock tube is inves- tigated by using discontinuous Galerkin （DG） finite element method to solve the axisymmetric Euler equations. For validating the numerical method, the shock-tube problem with exact solution is computed, and the computed results agree well with the exact cases. Then, several cases with higher incident Mach numbers varying from 2.0 to 5.0 are simulated. Simulation results show that complicated flow-field structures of toroidal shock wave diffraction, reflection, and focusing in a co-axial cylindrical shock tube can be obtained at different incident Mach numbers and the numerical solutions appear steep gradients near the focusing point, which illustrates the DG method has higher accuracy and better resolution near the discontinuous point. Moreover, the focusing peak pres- sure with different grid scales is compared.
文摘Computational simulations on structurally different detonation generator are carried out to study the phenomena,the mechanism and the gas dynamics characteristics of flame implosion and shock wave focusing.Two-dimensional axisymmetric and unsteady Navier-Stokes equations are numerically solved and detailed chemical reaction kinetics of hydrogen/air mixture is used.The simulation results show that the laminar flame generated by low energy spark in the jet flame burner is accelerated under the narrow channel,the jet flame impinging on the axis strengthens shock wave and the shock wave enhances flame acceleration.Under the function of multiple shock waves and flame,a number of hot spots appear between the wave and the surface.The spots enlarge rapidly,thus forming an over-drive detonation with high pressure,and then declining to stable detonation.Through calculation and analysis,the length of detonation initiation and stable detonation are obtained,thus providing the useful information for further experimental investigations.
文摘We are pleased to announce that the Journal of Dermatologic Science and Cosmetic Technology,organized by the Guangdong Cosmetics Association,China and produced by KeAi(founded by China Science Publishing&Media Ltd.and Elsevier),will be officially released online on the ScienceDirect platform.This journal will serve as a high-level,international,and interdisciplinary academic exchange platform in the fields of dermatologic science and cosmetic technology.Its aim is to publish relevant research findings in dermatologic science and innovative cosmetic technologies,provide a comprehensive understanding of future trends in the cosmetics industry,and promote international exchange and cooperation between dermatologic science and the cosmetics industry.
基金National Natural Science Foundation of China(No.61671414)Natural Science Foundation for Young Scientists of Shanxi Province,China(No.201601D202035)
文摘The acoustic focusing effect of metamaterial has a wide range of applications in medicine,acoustic imaging,signal detection,etc.This paper presents an acoustic metamaterial applied to the acoustic focusing effect.The formation of acousticmetamaterial is designed into a cylindrical structure with three layers of ludox,cork and fluid rubber,which can produce a focusingphenomenon when acoustic waves propagate in air.For these strange phenomena,a scientific description is given theorietically.It can also be concluded that when the frequency of the incident acoustic wave increases?the number of peripheral bandsoutside the focusing poles will increase periodically.Besides,there are numerous groups of multipolar focusing phenomena inhigh frequency.The design of this acoustic metamaterial is successful through theorietical and experimental verification,therefore,it can be applied to acoustic communication and test.
基金supported in part by the National Natural Science Foundation of China(Grant No.62105376)the Guangdong Zhujiang Project(Grant Nos.2021ZT09X070 and 2021QN02X488).The authors declare no competing financial interests。
文摘On-chip focusing of plasmons in graded-index lenses is important for imaging,lithography,signal processing,and optical interconnects at the deep subwavelength nanoscale.However,owing to the inherent strong wavelength dispersion of plasmonic materials,the on-chip focusing of plasmons suffers from severe chromatic aberrations.With the well-established planar dielectric grating,a graded-index waveguide array lens(GIWAL)is proposed to support the excitation and propagation of acoustic graphene plasmon polaritons(AGPPs)and to achieve the achromatic on-chip focusing of the AGPPs with a focus as small as about 2%of the operating wavelength in the frequency band from 10 to 20 THz,benefiting from the wavelength-independent index profile of the GIWAL.An analytical theory is provided to understand the on-chip focusing of the AGPPs and other beam evolution behaviors,such as self-focusing,self-collimation,and pendulum effects of Gaussian beams as well as spatial inversions of digital optical signals.Furthermore,the possibility of the GIWAL to invert spatially broadband digital optical signals is demonstrated,indicating the potential value of the GIWAL in broadband digital communication and signal processing.
基金Project supported by the Natural Science Foundation of Beijing Municipality,China(Grant No.7182091)。
文摘We use feedback wavefront shaping technology to realize the multi-point uniform light focusing in three-dimensional(3D) space through scattering media only by loading the optimal mask once.General 3D spatial focusing needs to load the optimal mask multiple times to realize the spatial movement of the focal point and the uniformity of multi-point focusing cannot be guaranteed.First,we investigate the effects of speckle axial correlation and different axial distances on 3D spatial multi-point uniform focusing and propose possible solutions.Then we use our developed non-dominated sorting genetic algorithm suitable for 3D spatial focusing(S-NSGA) to verify the experiment of multi-point focusing in 3D space.This research is expected to have potential applications in the fields of optical manipulation and optogenetics.
基金This research was partially supported by the National Natural Science Foundation of China (Grant No. 50379002),the Korea Research Council of Public Science and Technology (Principal R&D Program) and Korea Ministry of Science and Technology (International Collaboration Research Program)
文摘An experimental scheme for the generation of directional focusing waves in a wave basin is established in this paper. The effects of the directional range, frequency width and center frequency on the wave focusing are studied. The distribution of maximum amplitude and the evolution of time series and spectra during wave packet propagation and the variation of water surface parameters are extensively investigated. The results reveal that the characteristics of focusing waves are significantly influenced by wave directionality and that the breaking criteria for directional waves are distinctly different from those for unidirectional waves.
基金supported by the National Natural Science Foundation of China (Grant No.50779004)
文摘Four focusing models for generation of freak waves are presented. An extreme wave focusing model is presented on the basis of the enhanced High-Order Spectral （HOS） method and the importance of the nonlinear wave-wave interaction is evaluated by comparison of the calculated results with experimental and theoretical data. Based on the modification of the Longuet-Higgins model, four wave models for generation of freak waves （a. extreme wave model ＋ random wave model; b. extreme wave model ＋ regular wave model; e. phase interval modulation wave focusing model; d. number modulation wave focusing model with the same phase） are proposed. By use of different energy distribution techniques in the four models, freak wave events are obtained with different Hmax/Hs in finite space and time.
基金supported by the National Key Research and Development Program of China (Grant No. 2017YFF0106202)National Natural Science Foundation of China (Grant No. 61473279)+1 种基金the Key Research Program of Frontier Sciences, CAS (Grant No. QYZDJ-SSW-JSC037)the Youth Innovation Promotion Association, CAS
文摘This paper presents a method for the automatic adjustment of the laser defocusing amount in micro-laser-induced breakdown spectroscopy. A microscopic optical imaging system consisting of a CCD camera and a 20× objective lens was adopted to realize the method. The real-time auto-focusing of the system was achieved by detecting the effective pixels of the light spot generated by the laser pointer. The focusing accuracy of the method could achieve 3 μm. The element concentrations of Mn and Ni in low-alloy steels were analyzed at a crater diameter of about 35 μm using the presented method. After using the presented method, the determination coefficients of Mn and Ni both exceeded 0.997, with the root-mean-square errors being 0.0133 and 0.0395, respectively. Scanning analysis was performed on the inclined plane and the curved surface by means of focusing control and non-focusing control. Ten characteristic spectral lines of Fe were selected as the analysis lines. With the focusing control, the average relative standard deviations obtained on the inclined plane and curved surface were both less than 5%, and much less than the values without focusing control, 14.6% and 40.39%.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61178015,11304104 and 61575070
文摘We demonstrate light focusing through scattering media by introducing particle swarm optimization for modulat- ing the phase wavefront. Light refocusing is simulated numerically based on the angular spectrum method and the circular Gaussian distribution model of the scattering media. Experimentally, a spatial light modulator is used to control the phase of incident light, so as to make the scattered light converge to a focus. The influence of divided segments of input light and the effect of the number of iterations on light intensity enhancement are investigated. Simulation results are found to be in good agreement with the theoretical analysis for light refocusing.
文摘The tight focusing properties of a radially polarized Gaussian beam with a nested pair of vortices having a radial wave front distribution are investigated theoretically by the vector diffraction theory. The results show that the optical intensity in the focal region can be altered considerably by changing the location of the vortices nested in a radially polarized Gaussian beam. It is noted that focal evolution from one annular focal pattern to a highly confined focal spot in the transverse direction is observed corresponding to the change in the location of the optical vortices in the input plane. It is also observed that the generated focal hole or spot lead to a focal shift along the optical axis remarkably under proper radial phase modulation. Hence the proposed system may be applied to construct tunable optical traps for both high and low refractive index particles.
基金This research was respectively supported by the National Natural Science Foundation of China(Grant No.50379002)Programfor New Century Excellent Talents in University(NCET-05-0282)the Korea ResearchCouncil of Public Science and Technology(Principal R&D Program)
文摘Two-dimensional focusing waves are generated and investigated by numerical method. The numerical model is developed by introducing the wave maker boundary on the high-order spectral （HOS） method proposed by Dommermuth and Yue in 1987 and verified by theoretical and experimental data. Some cases of focusing waves considering different parameters such as assumed focusing amplitudes, frequency bandwidth, central frequency and frequency spectrum are generated. Characteristics of the focusing wave including surface elevations, the maximum crest, shift of focusing points and frequency spectra are discussed. The results show that the focusing wave characteristics are strongly affected by focusing amplitudes, frequency bandwidth, central frequency and frequency spectrum.
基金supported by the National Key Research and Development Program of China(2019YFA0705000,2022YFA1404800)National Natural Science Foundation of China(12004221,12174107,12192254,11734009,12192251,92250304,11974218)+4 种基金Postdoctoral Innovation Talents Support Program of Shandong Province(No.SDBX2019005)Science and Technology Commission of Shanghai Municipality(21DZ1101500)Local science and technology development project of the central government(YDZX20203700001766)Shanghai Municipal Science and Technology Major ProjectNatural Science Foundation of Shandong Province(ZR2021ZD02).
文摘To improve the processing efficiency and extend the tuning range of 3D isotropic fabrication,we apply the simultaneous spatiotemporal focusing(SSTF)technique to a high-repetition-rate femtosecond(fs)fiber laser system.In the SSTF scheme,we propose a pulse compensation scheme for the fiber laser with a narrow spectral bandwidth by building an extra-cavity pulse stretcher.We further demonstrate truly 3D isotropic microfabrication in photosensitive glass with a tunable resolution ranging from 8μm to 22μm using the SSTF of fs laser pulses.Moreover,we systematically investigate the influences of pulse energy,writing speed,processing depth,and spherical aberration on the fabrication resolution.As a proof-of-concept demonstration,the SSTF scheme was further employed for the fs laser-assisted etching of complicated glass microfluidic structures with 3D uniform sizes.The developed technique can be extended to many applications such as advanced photonics,3D biomimetic printing,micro-electromechanical systems,and lab-on-a-chips.
基金This work is supported by the National Science Foundation of China(NSFC)with agreement No.11520101001.This paper continues to study on the basis of the work of Chen Li,Fan Min and Zhou Lei.thank you!I also would like to thank my mentor Professor Luo Ying for his guidance and help.
文摘A fully non-contact experimental platform for ultrasonic Lamb wave damage detection was constructed,where laser exciting and the scanning laser Doppler vibrometer were used to realize the high-resolution pickup of the Lamb wave field in the structure,which has overcome the disadvantages of low spatial resolution caused by the conventional contact Lamb wave transducer.In order to suppress the dispersion effect of broadband laser-ultrasonic signal,we proposed time-domain filtering in multi-band method based on wavelet analysis to decompose the broadband signal into multiple narrowband ones and separate the scattering signals effectively without reference signal.On this basis,the total focusing method(TFM)was used for damage imaging.However,when the traditional TFM was applied to image based on ultrasonic Lamb wave,the inherent dispersion characteristic of ultrasonic Lamb wave could lead to the miscalculation of time delay,thus reducing the imaging precision.Therefore,the frequency-domain TFM was developed by applying phase delay in the frequency domain.The logical AND was introduced to synthesize the damage imaging results of multiple narrowband signals to obtain high-precision damage imaging.Our study has shown that the method of time-domain filtering in multi-band combining with frequency-domain TFM can realize non-contact and accurate damage detection in isotropic plate structures,and it is a potential effective method for application in engineering practice.
基金Supported by the National Natural Science Foundation of China(Grant No.51905070).
文摘Full matrix focusing method of ultrasonic phased array has been proved with advantages of good signal-to-noise ratio and imaging resolution in the field of Ultrasonic NDT.However,it is still suffering from the time-consuming data acquisition and processing.In order to solve the problem,two simplified matrix focusing methods are provided in the paper.One provided method is a triangular matrix focusing algorithm based on the principle of reciprocity for the multi-channel ultrasonic system.The other provided method is a trapezoidal matrix focusing algorithm based on the energy weight of the different channel to the focusing area.Time of data acquisition and computational is decreased with the provided simplified matrix focusing methods.In order to prove the validity of two provided algorithms,both side-drilled holes and oblique cracks are used for imaging experiments.The experimental results show that the imaging quality of the triangular matrix focusing algorithm is basically consistent to that of the full matrix focusing method.And imaging quality of the trapezoidal matrix focusing algorithm is slightly reduced with the amount of multi-channel data decreasing.Both data acquisition and computational efficiency using the triangular matrix focusing algorithm and the trapezoidal matrix focusing algorithm have been improved significantly compared with original full matrix focusing method.
