The paper described a newly developed high performance compressed air foam system(CAFS). The effective system generates uniform foam w ith greater momentum by injecting compressed air into flowing foam solution. Foa ...The paper described a newly developed high performance compressed air foam system(CAFS). The effective system generates uniform foam w ith greater momentum by injecting compressed air into flowing foam solution. Foa m generated by this system presented superior viscous and wetting properties to water.A pendulum system was designed to measure yield stress of foam. The results pro ved the existence of yield stress of foam. And the increasing tendency of yield stress with gas fraction and bubble size has also been found out.展开更多
Nowadays, the safety of oil depots is paid more and more attention in the development of national production safety. Although accidents in oil depots have been greatly reduced in recent years, it is not without accide...Nowadays, the safety of oil depots is paid more and more attention in the development of national production safety. Although accidents in oil depots have been greatly reduced in recent years, it is not without accidents. In case of accidents and fires, it is often the fire foam system that plays a key role. The fire sprinkler system is mainly used to cool down and prevent further expansion of the accident. The control of the foam fire extinguishing system has a great impact on the loss of the oil depot. Therefore, the acceptance of the fire sprinkler system in the early stage of the project became the key node of the completion acceptance milestone of the project construction. How to design and control the reasonable application of foam fire-fighting system in fire-fighting code. The safety measures of foam fire-fighting system in oil depot are mainly to determine the inlet pressure based on the number of foam generators, foam feed pump, foam supply volume, foam supply strength and pressure loss of pipelines, so as to enable the foam generators to function and operate to achieve the best fire-fighting effect.展开更多
Boosted by economic development and rising living standards,the world's carbon dioxide emissions remain high.Maintaining temperature rises below 1.5℃ by the end of the century requires rapid global carbon capture...Boosted by economic development and rising living standards,the world's carbon dioxide emissions remain high.Maintaining temperature rises below 1.5℃ by the end of the century requires rapid global carbon capture and storage implementation.The successful application of carbon capture,utilization,and storage(CCUS)technology in oilfields has become the key to getting rid of this predicament.Foam flooding,as an organic combination of gas and chemical flooding,became popular in the 1950s.Notwithstanding the irreplaceable advantages,as a thermodynamically unstable system,foam's stability has long restricted its development in enhanced oil and gas recovery.With special surface/interface effects and small-size effects,nanoparticles can be used as foam stabilizers to enhance foam stability,thereby improving foam seepage and oil displacement effects in porous media.In this paper,the decay kinetics and the stabilization mechanisms of nanoparticle-reinforced foams were systematically reviewed.The effects of nanoparticle characteristics,including particle concentration,surface wettability,particle size,and type,and reservoir environment factors,including oil,temperature,pressure,and salinity on the foam stabilization ability were analyzed in detail.The seepage and flooding mechanisms of nanoparticle-reinforced foams were summarized as:improving the plugging properties of foams,enhancing the interaction between foams and crude oil,and synergistically adjusting the wettability of reservoir rocks.Finally,the challenges in the practical application of nanoparticle-reinforced foams were highlighted,and the development direction was proposed.The development of nanoparticle-reinforced foam can open the way toward adaptive and evolutive EOR technology,taking one further step towards the high-efficiency production of the petroleum industry.展开更多
The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D i...The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D interconnected pore structure was prepared through the high pressure pyrolysis of mesophase coal tar pitch.It is found that the 3D interconnected cellular pores of MPCF facilitate multiple reflections of electromagnetic waves,which results in the minimum reflection loss(RLmin)value of MPCF reaches-37.84 dB with the effective absorption bandwidth(EAB)of 5.44 GHz at a thickness of 2.70 mm,and the total average electromagnetic shielding effectiveness(SE_(T))under 3.00 mm thickness achieves 26.52 dB in X-band.Subsequently,MPCF is activated by KOH to obtain activated carbon foam(A-MPCF).The average SE_(T)of A-MPCF achieves 103.00 dB for abundant nanopores on the pore cell walls,which leads to a transition from the multiple reflections of electromagnetic waves on the walls to diffuse reflection.Unfortunately,the reflection coefficient(R)of A-MPCF increases from 0.78 to 0.90.To reduce the R value,Fe_(3)O_(4)/A-MPCF was fabricated via the in situ growth of nano Fe_(3)O_(4)on A-MPCF.Consequently,the R value of Fe_(3)O_(4)/A-MPCF was reduced from 0.90 to 0.74,whereas the MWA performance was only slightly decreased.This work proposes a simple strategy for simultaneously adjusting MWA and EMI shielding performances of materials.展开更多
Waste glass fibers were used as the main raw materials to prepare foamed glass-ceramics with 0-14 wt%H_(3)BO_(3)as a flux agent.The effects of H_(3)BO_(3)on the crystallization process,foaming behavior,and physical pr...Waste glass fibers were used as the main raw materials to prepare foamed glass-ceramics with 0-14 wt%H_(3)BO_(3)as a flux agent.The effects of H_(3)BO_(3)on the crystallization process,foaming behavior,and physical properties of CaO-MgO-Al_(2)O_(3)-SiO_(2)foamed glass-ceramics were investigated.The results showed that the main crystalline phase of the foamed glass-ceramics was anorthite with diopside as a minor crystalline phase,which exhibited a typical surface crystallization process.The addition of H_(3)BO_(3)modified the surface of glass powders and inhibited crystal precipitation obviously.The low melting point of H_(3)BO_(3)and the decrease of crystallinity jointly promoted the growth of pores,resulting in a reduction of bulk density and an increase in porosity.The compressive strength and thermal conductivity of the samples were linearly related to the bulk density.In particular,the sample added with 10 wt%H_(3)BO_(3)exhibited excellent properties,possessing a low coefficient of thermal conductivity 0.081 W/(m·K)and relatively high compressive strength 3.36 MPa.展开更多
Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usu...Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usually involves complex procedures and extremely depends on unidirectional freezing technique.Herein,we propose a groundbreaking approach that leverages the assemblies of salting-out protein induced by ammonium metatungstate(AM)as the precursor,and then acquire directional three-dimensional carbon-based foams through simple pyrolysis.The electrostatic interaction between AM and protein ensures well dispersion of WC_(1−x)nanoparticles on carbon frameworks.The content of WC_(1−x)nanoparticles can be rationally regulated by AM dosage,and it also affects the electromagnetic(EM)properties of final carbon-based foams.The optimized foam exhibits exceptional EM absorption performance,achieving a remarkable minimum reflection loss of−72.0 dB and an effective absorption bandwidth of 6.3 GHz when EM wave propagates parallel to the directional pores.Such performance benefits from the synergistic effects of macroporous architecture and compositional design.Although there is a directional dependence of EM absorption,radar stealth simulation demonstrates that these foams can still promise considerable reduction in radar cross section with the change of incident angle.Moreover,COMSOL simulation further identifies their good performance in preventing EM interference among different electronic components.展开更多
Bio-based polyurethane foam has attracted increasing attentions due to eco-friendliness and fossil feedstock issues.However,the inherent flammability limits its application in different fields.Herein,we demonstrate a ...Bio-based polyurethane foam has attracted increasing attentions due to eco-friendliness and fossil feedstock issues.However,the inherent flammability limits its application in different fields.Herein,we demonstrate a green bio-based flame-retardant system to fabricate polyurethane foam composite with durable flame retardancy,smoke suppression,and thermal insulation property.In this system,the green bio-based polyol(VED)with good reactivity and compatibility plays a role of flame retardant and EG acts as a synergistic filler.As a result,the LOI value of foam composite increased to 30.5 vol.%and it achieved a V-0 rating in the UL-94 vertical burning test.Additionally,the peak heat release rate(pHRR)and the total smoke production(TSP)decreased by 66.1%and 63.4%,respectively.Furthermore,the foam composite maintained durable flame retardancy after accelerated thermal aging test,whose thermal-insulating property was maintained even after being treated in high-humidity environment with 85%R.H.for a week.This work provides a facile strategy for durable flame retardancy and long-term thermal insulation performance,and creates opportunities for the practical applications of bio-based foam composites.展开更多
To overcome the drawbacks of the conventional foam technology used for dust suppression,including large pressure loss,high water pressure and low driving pressure,a new pneumatic foaming system is introduced.Then an o...To overcome the drawbacks of the conventional foam technology used for dust suppression,including large pressure loss,high water pressure and low driving pressure,a new pneumatic foaming system is introduced.Then an original design of foaming agent mixing device is proposed,and its performance is investigated and evaluated under different pressure compensations.Experimental results show that the maximum absorption amount increases by 2.9-6.7 times at a pressure compensation of 0.04-0.2 MPa compared with no pressure compensation.The pressure loss and pressure fluctuation both reduce significantly with increasing pressure compensation.The critical outlet pressure increases by30.4-240%.Field application indicates that the proposed mixing device ensures the reliable addition of foaming agent used for foam dust suppression.The effect of foam on dust suppression is remarkable,and the economic cost of foam is low.Therefore,there is reason to believe that the new mixing device will greatly promote foam technology to be widely used for suppressing dust in underground coal mines.展开更多
A solar-light double illumination photoelectrocatalytic cell（SLDIPEC） was fabricated for autonomous CO2 reduction and O2 evolution with the aid of photosystem II（PS-II, an efficient light-driven water-oxidized enzy...A solar-light double illumination photoelectrocatalytic cell（SLDIPEC） was fabricated for autonomous CO2 reduction and O2 evolution with the aid of photosystem II（PS-II, an efficient light-driven water-oxidized enzyme from nature） and utilized in a photoanode solution. The proposed SLPEC system was composed of Cu foam as the photoanode and p-Si nanowires（Si-NW） as the photocathode. Under solar irradiation, it exhibited a super-photoelectrocatalytic performance for CO2 conversion to methanol, with a high evolution rate（41.94 mmol/hr）, owing to fast electron transfer from PS-II to Cu foam.Electrons were subsequently trapped by Si-NW through an external circuit via bias voltage（0.5 V）, and a suitable conduction band potential of Si（-0.6 e V） allowed CO2 to be easily reduced to CH3 OH at the photocathode. The constructed Z-scheme between Cu foam and Si-NW can allow the SLDIPEC system to reduce CO2（8.03 mmol/hr） in the absence of bias voltage. This approach makes full use of the energy band mismatch of the photoanode and photocathode to design a highly efficient device for solving environmental issues and producing clean energy.展开更多
To solve the problems such as high denstiy,foam instability,low compressive strength,high porosity and poor durability associated with conventional foam cements,a novel colloidal gas aphron(CGA)based foam cement syste...To solve the problems such as high denstiy,foam instability,low compressive strength,high porosity and poor durability associated with conventional foam cements,a novel colloidal gas aphron(CGA)based foam cement system was investigated and tested for properties.CGA is used in a base slurry as the foam component and the recipe was optimized with hollow sphere and micro-silica in terms of particle size distribution(PSD).Porosity,permeability,strength,brittleness,elasticity,free water content,foam stability and density tests on the CGA based foam cement system were carried out to evaluate the performance of the system.According to the experiment results,at the foam proportion of 10%,the cement density was reduced to 1040 kg/m3,and stable microfoam net structure not significantly affected by high temperature and high pressure was formed in the cement system.The optimal CGA based foam cement has a free water content of 0%,porosity of 24%,permeability of 0.7×10-3μm2,low elasticity modulus,high Poisson’s ratio,and reasonable compressive strength,and is more elastic and flexible with capability to tolerate regional stresses.展开更多
For the waterflooding of late development on an offshore oilfield has become worse, and some wells group has entered into high water cut-off period, water plugging work becomes particularly important. Due to the limit...For the waterflooding of late development on an offshore oilfield has become worse, and some wells group has entered into high water cut-off period, water plugging work becomes particularly important. Due to the limited construction of offshore oilfield, space water supply difficulties, and stability of plugging agent, self-generating enhanced foam has been designed as the aimed block plugging system. The formula is determined as: 23.25% of NH4Cl + 30% of NaNO2 + 0.1% of catalyst + 0.6% of COSL-3 foaming agent + 0.25% of HS-type HPAM foam stabilizer. Measurement point of pipe with permeability of 0.5 μm2 and 2 μm2 has been used in the plugging and EOR experiments. The experiments show that this system has the selective plugging effect for the heterogeneous formation, especially for middle and posterior part of high permeability formation, and the recovery rate of low permeability pipe is enhanced up to 32.15%.展开更多
Designing and manufacturing compatible multi-band stealth materials remains a great challenge. In this work, a silver-metalized polyimide photochromic composite foam is successfully fabricated by self-activating elect...Designing and manufacturing compatible multi-band stealth materials remains a great challenge. In this work, a silver-metalized polyimide photochromic composite foam is successfully fabricated by self-activating electroless silver-plating on the surface of the polyimide skeleton and followed by applying a photochromic coating on the upper surface. The effective loading of silver nanoparticles facilitates the rational construction of a conductive network in foam, improving the efficient dissipation of incident electromagnetic waves. In addition, the interconnected conductive network successfully endows it with an excellent Joule heating capability, which can be employed to effectively remove ice and/or mitigate the impact of water vapor on radar stealth performance in cold and wet weather. Besides, the low emissivity silver plating combined with superior thermal insulation of foam enables the material with excellent infrared stealth performance. Moreover, the modulation of self-adaptive photochromic coating brings a prominent visual stealth performance under different sunlight backgrounds. As a result, such excellent radar and infrared stealth performance combined with the adaptive color-switching capability provides the foam with great potential for preparing compatible multi-band materials.展开更多
Lignin has been proved to be a promising precursor for producing carbon foam.The thermal and chemistry properties of lignin during its thermal conversion make it quite unique comparing with other precursors,and the co...Lignin has been proved to be a promising precursor for producing carbon foam.The thermal and chemistry properties of lignin during its thermal conversion make it quite unique comparing with other precursors,and the conversion parameters can clearly affect the properties of the derived products.Therefore,this study systematically investigated the effects of key carbonization parameters on the properties of the resulting carbon foam materials.The findings demonstrate that the performance of the self-shaping lignin-derived carbon foam is simultaneously influenced by the factors that carbonization temperature,heating rate,and carbonization duration.Specifically,the carbonization temperature and carbonization duration have a significant impact on the mechanical performance,where higher temperatures and long carbonization time improve compressive strength and specific strength.Moreover,the data revealed that elevated temperatures,rapid heating rates,and shortened carbonization periods collectively promoted the development of higher porosities and larger pore diameters within the carbon foam structure.Conversely,lower carbonization temperatures,slower heating rates,and extended carbonization durations facilitated the formation of microporous in the carbon foam.This study provides a scientific foundation for optimizing the production of lignin-derived carbon foam with tailored properties and performance characteristics.展开更多
Zinc(Zn)-based materials show broad application prospects for bone repair due to their biodegradability and good biocompatibility.In particular,Zn metal foam has unique interconnected pore structure that facilitates i...Zinc(Zn)-based materials show broad application prospects for bone repair due to their biodegradability and good biocompatibility.In particular,Zn metal foam has unique interconnected pore structure that facilitates inward growth of new bone tissue,making it ideal candidates for orthopedic implants.However,pure Zn metal foam shows poor mechanical property,high degradation rate,and unsatisfactory osteogenic activity.Herein,Zinc-manganese(Zn-Mn)alloy foams were electrodeposited in Zn and Mn-containing electrolytes to overcome the concerns.The results showed that Mn could be incorporated into the foams in the form of MnZn_(13).Zn-Mn alloy foams showed better mechanical property and osteogenic activity as well as moderate degradation rate when compared with pure Zn metal foam.In addition,these properties could also be regulated by preparation process.The peak stress and osteogenic activity increased with deposition current(0.3‒0.5 A)and electrolyte pH(3‒5),but decreased with electrolyte temperature(20‒40℃),while the degradation rate exhibited opposite tendency,which suggests high deposition current and electrolyte pH and low electrolyte temperature can fabricate Zn-Mn alloy foam with favorable mechanical property,moderate degradation rate,and osteogenic activity.These findings provide a valuable reference for the design and fabrication of novel Zn-based biodegradable materials.展开更多
Catalytic oxidation of organic pollutants is a well-known and effective technique for pollutant abatement.Unfortunately,this method is significantly hindered in practical applications by the lowefficiency and difficul...Catalytic oxidation of organic pollutants is a well-known and effective technique for pollutant abatement.Unfortunately,this method is significantly hindered in practical applications by the lowefficiency and difficult recovery of the catalysts in a powdery form.Herein,a three-dimensional(3D)framework of Fe-incorporated Ni_(3)S_(2)nanosheets in-situ grown on Ni foam(Fe-Ni_(3)S_(2)@NF)was fabricated by a facile two-step hydrothermal process and applied to trigger peroxymonosulfate(PMS)oxidation of organic compounds inwater.A homogeneous growth environment enabled the uniform and scalable growth of Fe-Ni_(3)S_(2)nanosheets on the Ni foam.Fe-Ni_(3)S_(2)@NF possessed outstanding activity and durability in activating PMS,as it effectively facilitated electron transfer from organic pollutants to PMS.Fe-Ni_(3)S_(2)@NF initially supplied electrons to PMS,causing the catalyst to undergo oxidation,and subsequently accepted electrons from organic compounds,returning to its initial state.The introduction of Fe into the Ni_(3)S_(2)lattice enhanced electrical conductivity,promoting mediated electron transfer between PMS and organic compounds.The 3D conductive Ni foam provided an ideal platform for the nucleation and growth of Fe-Ni_(3)S_(2),accelerating pollutant abatement due to its porous structure and high conductivity.Furthermore,its monolithic nature simplified the catalyst recycling process.A continuous flow packed-bed reactor by encapsulating Fe-Ni_(3)S_(2)@NF catalyst achieved complete pollutant abatement with continuous operation for 240 h,highlighting its immense potential for practical environmental remediation.This study presents a facile synthesis method for creating a novel type of monolithic catalyst with high activity and durability for decontamination through Fenton-like processes.展开更多
Metal foams are a fascinating group of materials that possess distinct physicochEMIcal properties and interconnected strut features with high surface area-to-volume ratios, high specific strength and lightweight natur...Metal foams are a fascinating group of materials that possess distinct physicochEMIcal properties and interconnected strut features with high surface area-to-volume ratios, high specific strength and lightweight nature. These characteristics make them ideal for applications in vibration damping, heat insulation and weight reduction. In recent years, there has been increasing interest in the application of interfering energy conversion such as electromagnetic wave (EMW) and sound, where the metal foams could emerge as a solution. This paper will present a comprehensive review of the preparation methods as well as the interference energy converting mechanisms for metal foams. Typically, the progress and prospective aspects of metal foams for EMW absorption, electromagnetic interference (EMI) shielding and sound absorption have been emphasized. Through this review, we aspire to offer valuable insights for the development of multifunctional applications with metal foam materials.展开更多
As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal...As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal conversion ability have received extensive attention.Meeting the aforesaid requirements simultaneously remains a huge challenge.In this research,the melamine foam(MF)/polypyrrole(PPy)nanowire arrays(MF@PPy)were fabricated via one-step electrochemical polymerization.The hierarchical MF@PPy foam was composed of three-dimensional PPy micro-skeleton and ordered PPy nanowire arrays.Due to the upwardly grown PPy nanowire arrays,the MF@PPy foam possessed good hydrophobicity ability with a water contact angle of 142.00°and outstanding stability under various harsh environments.Meanwhile,the MF@PPy foam showed excellent thermal insulation property on account of the low thermal conductivity and elongated ligament characteristic of PPy nanowire arrays.Furthermore,taking advantage of the high conductivity(128.2 S m^(-1)),the MF@PPy foam exhibited rapid Joule heating under 3 V,resulting in dynamic infrared stealth and thermal camouflage effects.More importantly,the MF@PPy foam exhibited remarkable EMI shielding effectiveness values of 55.77 dB and 19,928.57 dB cm^(2)g^(-1).Strong EMI shielding was put down to the hierarchically porous PPy structure,which offered outstanding impedance matching,conduction loss,and multiple attenuations.This innovative approach provides significant insights to the development of advanced multifunctional EMI shielding foams by constructing PPy nanowire arrays,showing great applications in both military and civilian fields.展开更多
The rapid development of modern 5G technology has significantly increased the demand for multifunctional electromagnetic interference(EMI)shielding and wave-absorbing materials.Hence,a densification strategy was propo...The rapid development of modern 5G technology has significantly increased the demand for multifunctional electromagnetic interference(EMI)shielding and wave-absorbing materials.Hence,a densification strategy was proposed to fabricate multifunctional rigid polyimide(PI)composite foam.As a result,the composite PI foam exhibits excellent mechanical properties,with tensile and bending strengths of 4.7 and 21.1 MPa,respectively.Moreover,the composite PI foam achieves a promising EMI shielding performance with a high absorption coefficient(A)of 0.71,coupled with an X-band(8.2–12.4 GHz)EMI rating of 44 dB(2 mm)due to its high conductivity(20.29 ms/mm).Satisfyingly,the composite PI foam also has an optimal reflection loss(RL)of up to−46.4 dB and an effective absorption bandwidth(EAB)(RL<−10 dB)that covers the entire X-band.Meanwhile,the fabricated foam demonstrates a Joule heating performance of 89.2°C under supply voltages(3–9 V)and rapid response time(within 20 s)for stable and reproducible performance in long-term cycling.This work provides a versatile strategy for the development of lightweight and high-strength materials for EMI shielding and microwave absorption,demonstrating great potential for aerospace,microelectronics,and energy conversion applications.展开更多
The squeezing deformation of surrounding rock is an important factor restricting the safe construction and long-term operation of tunnels when a tunnel passes through soft strata with high ground stress.Under such sof...The squeezing deformation of surrounding rock is an important factor restricting the safe construction and long-term operation of tunnels when a tunnel passes through soft strata with high ground stress.Under such soft rock geological conditions,the large deformation of the surrounding rock can easily lead to the failure of supporting structures,including shotcrete cracks,spalling,and steel arch distortion.To improve the lining support performance during the large deformation of squeezed surrounding rock,this work selects aluminum foam with densities of 0.25 g/cm3,0.42 g/cm3 and 0.61 g/cm3 as the buffer layer material and carries out uniaxial confined compression tests.Through the evaluation and analysis of energy absorption and the comparison of the yield pressure of aluminum foam with those of other cushioning materials and yield pressure support systems,the strength,deformation and energy absorption of aluminum foam with a density of 0.25 g/cm3 meet the yield pressure performance requirements.The numerical model of the buffer layer yielding support system is then established via the finite element analysis software ABAQUS,and the influence of the buffer layer setting on the lining support is analyzed.Compared with the conventional support scheme,the addition of an aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining.The maximum and minimum principal stresses of the primary support are reduced by 13%and 15%,respectively.The maximum and minimum principal stresses of the secondary lining are reduced by 15%and 12%,respectively,and the displacement deformation of the secondary lining position is reduced by 15%.In summary,the application of aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining,improve the stress safety of the support and reduce the deformation of the support.展开更多
Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In t...Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.展开更多
文摘The paper described a newly developed high performance compressed air foam system(CAFS). The effective system generates uniform foam w ith greater momentum by injecting compressed air into flowing foam solution. Foa m generated by this system presented superior viscous and wetting properties to water.A pendulum system was designed to measure yield stress of foam. The results pro ved the existence of yield stress of foam. And the increasing tendency of yield stress with gas fraction and bubble size has also been found out.
文摘Nowadays, the safety of oil depots is paid more and more attention in the development of national production safety. Although accidents in oil depots have been greatly reduced in recent years, it is not without accidents. In case of accidents and fires, it is often the fire foam system that plays a key role. The fire sprinkler system is mainly used to cool down and prevent further expansion of the accident. The control of the foam fire extinguishing system has a great impact on the loss of the oil depot. Therefore, the acceptance of the fire sprinkler system in the early stage of the project became the key node of the completion acceptance milestone of the project construction. How to design and control the reasonable application of foam fire-fighting system in fire-fighting code. The safety measures of foam fire-fighting system in oil depot are mainly to determine the inlet pressure based on the number of foam generators, foam feed pump, foam supply volume, foam supply strength and pressure loss of pipelines, so as to enable the foam generators to function and operate to achieve the best fire-fighting effect.
基金The authors thank the National Natural Science Foundation of China(Grant 52004305)the Science Foundation of China University of Petroleum,Beijing(No.2462022BJRC005)for the support of this work.
文摘Boosted by economic development and rising living standards,the world's carbon dioxide emissions remain high.Maintaining temperature rises below 1.5℃ by the end of the century requires rapid global carbon capture and storage implementation.The successful application of carbon capture,utilization,and storage(CCUS)technology in oilfields has become the key to getting rid of this predicament.Foam flooding,as an organic combination of gas and chemical flooding,became popular in the 1950s.Notwithstanding the irreplaceable advantages,as a thermodynamically unstable system,foam's stability has long restricted its development in enhanced oil and gas recovery.With special surface/interface effects and small-size effects,nanoparticles can be used as foam stabilizers to enhance foam stability,thereby improving foam seepage and oil displacement effects in porous media.In this paper,the decay kinetics and the stabilization mechanisms of nanoparticle-reinforced foams were systematically reviewed.The effects of nanoparticle characteristics,including particle concentration,surface wettability,particle size,and type,and reservoir environment factors,including oil,temperature,pressure,and salinity on the foam stabilization ability were analyzed in detail.The seepage and flooding mechanisms of nanoparticle-reinforced foams were summarized as:improving the plugging properties of foams,enhancing the interaction between foams and crude oil,and synergistically adjusting the wettability of reservoir rocks.Finally,the challenges in the practical application of nanoparticle-reinforced foams were highlighted,and the development direction was proposed.The development of nanoparticle-reinforced foam can open the way toward adaptive and evolutive EOR technology,taking one further step towards the high-efficiency production of the petroleum industry.
基金Supported by the National Natural Science Foundation of China(22378181).
文摘The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D interconnected pore structure was prepared through the high pressure pyrolysis of mesophase coal tar pitch.It is found that the 3D interconnected cellular pores of MPCF facilitate multiple reflections of electromagnetic waves,which results in the minimum reflection loss(RLmin)value of MPCF reaches-37.84 dB with the effective absorption bandwidth(EAB)of 5.44 GHz at a thickness of 2.70 mm,and the total average electromagnetic shielding effectiveness(SE_(T))under 3.00 mm thickness achieves 26.52 dB in X-band.Subsequently,MPCF is activated by KOH to obtain activated carbon foam(A-MPCF).The average SE_(T)of A-MPCF achieves 103.00 dB for abundant nanopores on the pore cell walls,which leads to a transition from the multiple reflections of electromagnetic waves on the walls to diffuse reflection.Unfortunately,the reflection coefficient(R)of A-MPCF increases from 0.78 to 0.90.To reduce the R value,Fe_(3)O_(4)/A-MPCF was fabricated via the in situ growth of nano Fe_(3)O_(4)on A-MPCF.Consequently,the R value of Fe_(3)O_(4)/A-MPCF was reduced from 0.90 to 0.74,whereas the MWA performance was only slightly decreased.This work proposes a simple strategy for simultaneously adjusting MWA and EMI shielding performances of materials.
基金Funded by Shandong Provincial Youth Innovation Team Development Plan of Colleges and Universities(No.2022KJ100)National Natural Science Foundation of China(No.52172019)。
文摘Waste glass fibers were used as the main raw materials to prepare foamed glass-ceramics with 0-14 wt%H_(3)BO_(3)as a flux agent.The effects of H_(3)BO_(3)on the crystallization process,foaming behavior,and physical properties of CaO-MgO-Al_(2)O_(3)-SiO_(2)foamed glass-ceramics were investigated.The results showed that the main crystalline phase of the foamed glass-ceramics was anorthite with diopside as a minor crystalline phase,which exhibited a typical surface crystallization process.The addition of H_(3)BO_(3)modified the surface of glass powders and inhibited crystal precipitation obviously.The low melting point of H_(3)BO_(3)and the decrease of crystallinity jointly promoted the growth of pores,resulting in a reduction of bulk density and an increase in porosity.The compressive strength and thermal conductivity of the samples were linearly related to the bulk density.In particular,the sample added with 10 wt%H_(3)BO_(3)exhibited excellent properties,possessing a low coefficient of thermal conductivity 0.081 W/(m·K)and relatively high compressive strength 3.36 MPa.
基金financially supported by the National Natural Science Foundation of China(Nos.22475057 and No.52373262).
文摘Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usually involves complex procedures and extremely depends on unidirectional freezing technique.Herein,we propose a groundbreaking approach that leverages the assemblies of salting-out protein induced by ammonium metatungstate(AM)as the precursor,and then acquire directional three-dimensional carbon-based foams through simple pyrolysis.The electrostatic interaction between AM and protein ensures well dispersion of WC_(1−x)nanoparticles on carbon frameworks.The content of WC_(1−x)nanoparticles can be rationally regulated by AM dosage,and it also affects the electromagnetic(EM)properties of final carbon-based foams.The optimized foam exhibits exceptional EM absorption performance,achieving a remarkable minimum reflection loss of−72.0 dB and an effective absorption bandwidth of 6.3 GHz when EM wave propagates parallel to the directional pores.Such performance benefits from the synergistic effects of macroporous architecture and compositional design.Although there is a directional dependence of EM absorption,radar stealth simulation demonstrates that these foams can still promise considerable reduction in radar cross section with the change of incident angle.Moreover,COMSOL simulation further identifies their good performance in preventing EM interference among different electronic components.
基金supported by the National Natural Science Foundation of China(Nos.22175123,52122302,and 51991351)the 111 Project(No.B20001)Fundamental Research Funds for the Central Universities,and Open and Innovative Fund of Hubei Three Gorges Laboratory(Nos.2022LF2021 and SC213011).
文摘Bio-based polyurethane foam has attracted increasing attentions due to eco-friendliness and fossil feedstock issues.However,the inherent flammability limits its application in different fields.Herein,we demonstrate a green bio-based flame-retardant system to fabricate polyurethane foam composite with durable flame retardancy,smoke suppression,and thermal insulation property.In this system,the green bio-based polyol(VED)with good reactivity and compatibility plays a role of flame retardant and EG acts as a synergistic filler.As a result,the LOI value of foam composite increased to 30.5 vol.%and it achieved a V-0 rating in the UL-94 vertical burning test.Additionally,the peak heat release rate(pHRR)and the total smoke production(TSP)decreased by 66.1%and 63.4%,respectively.Furthermore,the foam composite maintained durable flame retardancy after accelerated thermal aging test,whose thermal-insulating property was maintained even after being treated in high-humidity environment with 85%R.H.for a week.This work provides a facile strategy for durable flame retardancy and long-term thermal insulation performance,and creates opportunities for the practical applications of bio-based foam composites.
基金supported by the National Natural Science Foundation of China(Nos.51474216 and 51504249)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Fundamental Research Funds for theCentral Universities
文摘To overcome the drawbacks of the conventional foam technology used for dust suppression,including large pressure loss,high water pressure and low driving pressure,a new pneumatic foaming system is introduced.Then an original design of foaming agent mixing device is proposed,and its performance is investigated and evaluated under different pressure compensations.Experimental results show that the maximum absorption amount increases by 2.9-6.7 times at a pressure compensation of 0.04-0.2 MPa compared with no pressure compensation.The pressure loss and pressure fluctuation both reduce significantly with increasing pressure compensation.The critical outlet pressure increases by30.4-240%.Field application indicates that the proposed mixing device ensures the reliable addition of foaming agent used for foam dust suppression.The effect of foam on dust suppression is remarkable,and the economic cost of foam is low.Therefore,there is reason to believe that the new mixing device will greatly promote foam technology to be widely used for suppressing dust in underground coal mines.
基金supported by the National Natural Science Foundation of China (No. 21477079, 21677099, 21237003)the Shanghai Government (No. 11ZR1426300, 13YZ054, 14ZR1430900)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University (No. IRT1269)the International Joint Laboratory on Resource Chemistry (No. IJLRC)
文摘A solar-light double illumination photoelectrocatalytic cell（SLDIPEC） was fabricated for autonomous CO2 reduction and O2 evolution with the aid of photosystem II（PS-II, an efficient light-driven water-oxidized enzyme from nature） and utilized in a photoanode solution. The proposed SLPEC system was composed of Cu foam as the photoanode and p-Si nanowires（Si-NW） as the photocathode. Under solar irradiation, it exhibited a super-photoelectrocatalytic performance for CO2 conversion to methanol, with a high evolution rate（41.94 mmol/hr）, owing to fast electron transfer from PS-II to Cu foam.Electrons were subsequently trapped by Si-NW through an external circuit via bias voltage（0.5 V）, and a suitable conduction band potential of Si（-0.6 e V） allowed CO2 to be easily reduced to CH3 OH at the photocathode. The constructed Z-scheme between Cu foam and Si-NW can allow the SLDIPEC system to reduce CO2（8.03 mmol/hr） in the absence of bias voltage. This approach makes full use of the energy band mismatch of the photoanode and photocathode to design a highly efficient device for solving environmental issues and producing clean energy.
文摘To solve the problems such as high denstiy,foam instability,low compressive strength,high porosity and poor durability associated with conventional foam cements,a novel colloidal gas aphron(CGA)based foam cement system was investigated and tested for properties.CGA is used in a base slurry as the foam component and the recipe was optimized with hollow sphere and micro-silica in terms of particle size distribution(PSD).Porosity,permeability,strength,brittleness,elasticity,free water content,foam stability and density tests on the CGA based foam cement system were carried out to evaluate the performance of the system.According to the experiment results,at the foam proportion of 10%,the cement density was reduced to 1040 kg/m3,and stable microfoam net structure not significantly affected by high temperature and high pressure was formed in the cement system.The optimal CGA based foam cement has a free water content of 0%,porosity of 24%,permeability of 0.7×10-3μm2,low elasticity modulus,high Poisson’s ratio,and reasonable compressive strength,and is more elastic and flexible with capability to tolerate regional stresses.
文摘For the waterflooding of late development on an offshore oilfield has become worse, and some wells group has entered into high water cut-off period, water plugging work becomes particularly important. Due to the limited construction of offshore oilfield, space water supply difficulties, and stability of plugging agent, self-generating enhanced foam has been designed as the aimed block plugging system. The formula is determined as: 23.25% of NH4Cl + 30% of NaNO2 + 0.1% of catalyst + 0.6% of COSL-3 foaming agent + 0.25% of HS-type HPAM foam stabilizer. Measurement point of pipe with permeability of 0.5 μm2 and 2 μm2 has been used in the plugging and EOR experiments. The experiments show that this system has the selective plugging effect for the heterogeneous formation, especially for middle and posterior part of high permeability formation, and the recovery rate of low permeability pipe is enhanced up to 32.15%.
基金supported by the National Natural Science Foundation of China(Nos.52373077,52003106,52233006,and 52161135302)the Research Foundation Flanders(No.G0F2322N)+1 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.SJCX23_1236)the Innovation Program of Shanghai Municipal Education Commission(No.2021-01-07-00-03-E00108).
文摘Designing and manufacturing compatible multi-band stealth materials remains a great challenge. In this work, a silver-metalized polyimide photochromic composite foam is successfully fabricated by self-activating electroless silver-plating on the surface of the polyimide skeleton and followed by applying a photochromic coating on the upper surface. The effective loading of silver nanoparticles facilitates the rational construction of a conductive network in foam, improving the efficient dissipation of incident electromagnetic waves. In addition, the interconnected conductive network successfully endows it with an excellent Joule heating capability, which can be employed to effectively remove ice and/or mitigate the impact of water vapor on radar stealth performance in cold and wet weather. Besides, the low emissivity silver plating combined with superior thermal insulation of foam enables the material with excellent infrared stealth performance. Moreover, the modulation of self-adaptive photochromic coating brings a prominent visual stealth performance under different sunlight backgrounds. As a result, such excellent radar and infrared stealth performance combined with the adaptive color-switching capability provides the foam with great potential for preparing compatible multi-band materials.
基金funding support from Taishan Scholars Program of Shandong Province(tsqn201909132)National Natural Science Foundation of China(22208183)+1 种基金Startup Foundation from Qingdao Agricultural University(663-1120040,665-1119020)Technology development project from Jinan Shengquan Company(20233702031771)。
文摘Lignin has been proved to be a promising precursor for producing carbon foam.The thermal and chemistry properties of lignin during its thermal conversion make it quite unique comparing with other precursors,and the conversion parameters can clearly affect the properties of the derived products.Therefore,this study systematically investigated the effects of key carbonization parameters on the properties of the resulting carbon foam materials.The findings demonstrate that the performance of the self-shaping lignin-derived carbon foam is simultaneously influenced by the factors that carbonization temperature,heating rate,and carbonization duration.Specifically,the carbonization temperature and carbonization duration have a significant impact on the mechanical performance,where higher temperatures and long carbonization time improve compressive strength and specific strength.Moreover,the data revealed that elevated temperatures,rapid heating rates,and shortened carbonization periods collectively promoted the development of higher porosities and larger pore diameters within the carbon foam structure.Conversely,lower carbonization temperatures,slower heating rates,and extended carbonization durations facilitated the formation of microporous in the carbon foam.This study provides a scientific foundation for optimizing the production of lignin-derived carbon foam with tailored properties and performance characteristics.
基金supported by the Key Research and Development Program of Shanxi Province(202102130501007)the Natural Science Foundation of Shanxi Province(202403021212109,202203021211173)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(2024L039).
文摘Zinc(Zn)-based materials show broad application prospects for bone repair due to their biodegradability and good biocompatibility.In particular,Zn metal foam has unique interconnected pore structure that facilitates inward growth of new bone tissue,making it ideal candidates for orthopedic implants.However,pure Zn metal foam shows poor mechanical property,high degradation rate,and unsatisfactory osteogenic activity.Herein,Zinc-manganese(Zn-Mn)alloy foams were electrodeposited in Zn and Mn-containing electrolytes to overcome the concerns.The results showed that Mn could be incorporated into the foams in the form of MnZn_(13).Zn-Mn alloy foams showed better mechanical property and osteogenic activity as well as moderate degradation rate when compared with pure Zn metal foam.In addition,these properties could also be regulated by preparation process.The peak stress and osteogenic activity increased with deposition current(0.3‒0.5 A)and electrolyte pH(3‒5),but decreased with electrolyte temperature(20‒40℃),while the degradation rate exhibited opposite tendency,which suggests high deposition current and electrolyte pH and low electrolyte temperature can fabricate Zn-Mn alloy foam with favorable mechanical property,moderate degradation rate,and osteogenic activity.These findings provide a valuable reference for the design and fabrication of novel Zn-based biodegradable materials.
基金supported by the National Natural Science Foundation of China(No.21876039)Y.Yao acknowledges the scholarship support from the China Scholarship Council(No.202106695010)Partial support from the Australian Research Council for DP230102406 is also acknowledged.
文摘Catalytic oxidation of organic pollutants is a well-known and effective technique for pollutant abatement.Unfortunately,this method is significantly hindered in practical applications by the lowefficiency and difficult recovery of the catalysts in a powdery form.Herein,a three-dimensional(3D)framework of Fe-incorporated Ni_(3)S_(2)nanosheets in-situ grown on Ni foam(Fe-Ni_(3)S_(2)@NF)was fabricated by a facile two-step hydrothermal process and applied to trigger peroxymonosulfate(PMS)oxidation of organic compounds inwater.A homogeneous growth environment enabled the uniform and scalable growth of Fe-Ni_(3)S_(2)nanosheets on the Ni foam.Fe-Ni_(3)S_(2)@NF possessed outstanding activity and durability in activating PMS,as it effectively facilitated electron transfer from organic pollutants to PMS.Fe-Ni_(3)S_(2)@NF initially supplied electrons to PMS,causing the catalyst to undergo oxidation,and subsequently accepted electrons from organic compounds,returning to its initial state.The introduction of Fe into the Ni_(3)S_(2)lattice enhanced electrical conductivity,promoting mediated electron transfer between PMS and organic compounds.The 3D conductive Ni foam provided an ideal platform for the nucleation and growth of Fe-Ni_(3)S_(2),accelerating pollutant abatement due to its porous structure and high conductivity.Furthermore,its monolithic nature simplified the catalyst recycling process.A continuous flow packed-bed reactor by encapsulating Fe-Ni_(3)S_(2)@NF catalyst achieved complete pollutant abatement with continuous operation for 240 h,highlighting its immense potential for practical environmental remediation.This study presents a facile synthesis method for creating a novel type of monolithic catalyst with high activity and durability for decontamination through Fenton-like processes.
基金supported by the National Natural Science Foundation of China(No.52271180)the Leading Goose R&D Program of Zhejiang Province(2022C01110).
文摘Metal foams are a fascinating group of materials that possess distinct physicochEMIcal properties and interconnected strut features with high surface area-to-volume ratios, high specific strength and lightweight nature. These characteristics make them ideal for applications in vibration damping, heat insulation and weight reduction. In recent years, there has been increasing interest in the application of interfering energy conversion such as electromagnetic wave (EMW) and sound, where the metal foams could emerge as a solution. This paper will present a comprehensive review of the preparation methods as well as the interference energy converting mechanisms for metal foams. Typically, the progress and prospective aspects of metal foams for EMW absorption, electromagnetic interference (EMI) shielding and sound absorption have been emphasized. Through this review, we aspire to offer valuable insights for the development of multifunctional applications with metal foam materials.
基金supported by the Key Research and Development Program of Sichuan Province(Grant No.2023ZHCG0050)the Fundamental Research Funds for the Central Universities of China(Grant No.2682024QZ006 and 2682024ZTPY042)the Analytic and Testing Center of Southwest Jiaotong University.
文摘As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal conversion ability have received extensive attention.Meeting the aforesaid requirements simultaneously remains a huge challenge.In this research,the melamine foam(MF)/polypyrrole(PPy)nanowire arrays(MF@PPy)were fabricated via one-step electrochemical polymerization.The hierarchical MF@PPy foam was composed of three-dimensional PPy micro-skeleton and ordered PPy nanowire arrays.Due to the upwardly grown PPy nanowire arrays,the MF@PPy foam possessed good hydrophobicity ability with a water contact angle of 142.00°and outstanding stability under various harsh environments.Meanwhile,the MF@PPy foam showed excellent thermal insulation property on account of the low thermal conductivity and elongated ligament characteristic of PPy nanowire arrays.Furthermore,taking advantage of the high conductivity(128.2 S m^(-1)),the MF@PPy foam exhibited rapid Joule heating under 3 V,resulting in dynamic infrared stealth and thermal camouflage effects.More importantly,the MF@PPy foam exhibited remarkable EMI shielding effectiveness values of 55.77 dB and 19,928.57 dB cm^(2)g^(-1).Strong EMI shielding was put down to the hierarchically porous PPy structure,which offered outstanding impedance matching,conduction loss,and multiple attenuations.This innovative approach provides significant insights to the development of advanced multifunctional EMI shielding foams by constructing PPy nanowire arrays,showing great applications in both military and civilian fields.
基金support from the Postgraduate Innovation Foundation of Xi'an Polytechnic University(No.chx2024034)the Natural Science Foundation of Shaanxi Province(No.2022JQ-362,2021JQ-677)the Scientific Research Program Funded by Shaanxi Provincial Education Department(No.21JK20180911).
文摘The rapid development of modern 5G technology has significantly increased the demand for multifunctional electromagnetic interference(EMI)shielding and wave-absorbing materials.Hence,a densification strategy was proposed to fabricate multifunctional rigid polyimide(PI)composite foam.As a result,the composite PI foam exhibits excellent mechanical properties,with tensile and bending strengths of 4.7 and 21.1 MPa,respectively.Moreover,the composite PI foam achieves a promising EMI shielding performance with a high absorption coefficient(A)of 0.71,coupled with an X-band(8.2–12.4 GHz)EMI rating of 44 dB(2 mm)due to its high conductivity(20.29 ms/mm).Satisfyingly,the composite PI foam also has an optimal reflection loss(RL)of up to−46.4 dB and an effective absorption bandwidth(EAB)(RL<−10 dB)that covers the entire X-band.Meanwhile,the fabricated foam demonstrates a Joule heating performance of 89.2°C under supply voltages(3–9 V)and rapid response time(within 20 s)for stable and reproducible performance in long-term cycling.This work provides a versatile strategy for the development of lightweight and high-strength materials for EMI shielding and microwave absorption,demonstrating great potential for aerospace,microelectronics,and energy conversion applications.
基金the support of the National Natural Science Foundation of China(Grant No.42207199)Scientific Research Project of Education of Zhejiang Province(No.Y202351343)+1 种基金Zhejiang Postdoctoral Scientific Research Project(Grant Nos.ZJ2022155,ZJ2022156)Zhejiang Province International Science and Technology Cooperation Base Open Fund Project(IBGDP-2023-01)。
文摘The squeezing deformation of surrounding rock is an important factor restricting the safe construction and long-term operation of tunnels when a tunnel passes through soft strata with high ground stress.Under such soft rock geological conditions,the large deformation of the surrounding rock can easily lead to the failure of supporting structures,including shotcrete cracks,spalling,and steel arch distortion.To improve the lining support performance during the large deformation of squeezed surrounding rock,this work selects aluminum foam with densities of 0.25 g/cm3,0.42 g/cm3 and 0.61 g/cm3 as the buffer layer material and carries out uniaxial confined compression tests.Through the evaluation and analysis of energy absorption and the comparison of the yield pressure of aluminum foam with those of other cushioning materials and yield pressure support systems,the strength,deformation and energy absorption of aluminum foam with a density of 0.25 g/cm3 meet the yield pressure performance requirements.The numerical model of the buffer layer yielding support system is then established via the finite element analysis software ABAQUS,and the influence of the buffer layer setting on the lining support is analyzed.Compared with the conventional support scheme,the addition of an aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining.The maximum and minimum principal stresses of the primary support are reduced by 13%and 15%,respectively.The maximum and minimum principal stresses of the secondary lining are reduced by 15%and 12%,respectively,and the displacement deformation of the secondary lining position is reduced by 15%.In summary,the application of aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining,improve the stress safety of the support and reduce the deformation of the support.
基金support of the Key Science Research Project in Colleges and Universities of Anhui Province,China(No.2022AH050813)the Medical Special Cultivation Project of Anhui University of Science and Technology,China(No.YZ2023H2A002).
文摘Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.
