Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively se...Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively separated oil–water emulsion as it was hydrophobic underwater.But its separation efficiencies(SEs)first increased to 98.9%,then dropped to 97.6%in 10 min because of oil-fouling.To tackle this problem,FM deposited with 0%–10%silica nanoparticle(NPsFMs),then coated by fluorocarbon polymer(X-[CH_(2)CH_(2)O]nCH_(2)CH_(2)O-Y-NH-COOCH_(2)C4F9)(FCNPs FMs),was used to enhance its roughness and regulate its initial wettability to improve the anti-fouling property.FCFM and FCNPs FMs were hydrophobic and oleophobic in air and oleophobic underwater.Their water contact angles,oil contact angles and oil contact angles were 115.3°–121.1°,128.8°–136.5°,and 131.6°–136.7°,respectively,meeting the requirement of 90°–140°for coalescence separation.FCNPs FM-5 had the best separation performance with a constant value of 99.8%in 10 min,while that of FCNPs FM-10 slightly decreased to 99.5%.Theoretical released droplet(TRD)diameter,calculated by the square root of the product of pore radius and fiber diameter,was used for the evaluation of coalescence performance.Analyzed by two ideal models,TRD diameter and fiber diameter showed a parabola type relationship,proving that the separation efficiency was a collaborative work of wettability,pore size and fiber diameter.Also,it explained the SEs reduction from FCNPs FM-5 to FCNPs FM-10 was revelent to the three parameters.Moreover,FCNPsFMs effectively separated emulsions stabilized by cationic surfactant CTAB(SEs:97.3%–98.4%)and anionic surfactant SDBS(SEs:91.3%–93.4%).But they had an adverse effect on nonionic surfactant Tween-80 emulsion separation(SEs:94.0%–71.76%).Emulsions made by diverse oils can be effectively separated:octane(SEs:99.4%–100%),rapeseed oil(SEs:97.3%–98.8%),and diesel(SEs:95.2%–97.0%).These findings provide new insights for designing novel materials for oil–water separation by coalescence mechanism.展开更多
The effect of relative humidity on the corrosion-resisting property of fluorocarbon coating was investigated by water vapor transmission technique and electrochemical impedance spectroscopy technique. Measuremerits we...The effect of relative humidity on the corrosion-resisting property of fluorocarbon coating was investigated by water vapor transmission technique and electrochemical impedance spectroscopy technique. Measuremerits were carried out on samples, which were tested in an accelerated corrosion environment for the same time （300, 500, 800 and 1000 h ）. The experimental results were obtained as follows： （i） The water absorption, coating resistance and corrosion rate of metal under the coating changed with relative humidity and aging time, the results obtained by EIS are good consistent with those by water vapor transmission technique ; （ ii ） when the subject investigated presented two time constant, the goodness of fit by EEC R （ C （ R （ CR ） ） ） was inferior to that by EEC R（ C（ R（QR） ） ）, but the error of parameters acquired from the former was smaller, by which we could analyze the experiment result quantitatively. With the appearance of diffusion layer on the metal, the difference of metal capacitance was aggravated, the error of parameters acquired from EEC R（ C（ R（ C（RW） ） ） ）was bigger than that from EEC R（ C（ R（ Q（ RW） ） ） ） .展开更多
Novel isosorbide derivative containing perfluorocarbon group,bi（perfluorooctanesulfonyl）isosorbide ester as chiral dopant in liquid crystal,was synthesized.Chemical structure was characterized by elemental analysis,...Novel isosorbide derivative containing perfluorocarbon group,bi（perfluorooctanesulfonyl）isosorbide ester as chiral dopant in liquid crystal,was synthesized.Chemical structure was characterized by elemental analysis,FT-IR,~1H NMR and ^（19）F NMR.The optical texture of the mixture was observed by polarized optical microscopy（POM）.Novel chiral dopant containing perfluorocarbon group had excellent optical activity.Its specific rotation and molar rotation were noticeable higher than those of bi（4-chloromethylbenzenecarbonic）isosorbide ester.The fluorocarbon group improved the molar rotation of chiral compound and did not affect optical rotation direction.The texture of the mixture added isosorbide derivative with fluorocarbon group showed the oily streak texture.展开更多
Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free em...Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free emulsion polymerization when the conception of particle design and polymer morphology was adopted. Moreover, the influence of mole ratio of BA to MAA, pH value on the oligomer was studied. And the effects of the added amount of oligomer, self-crosslinked monomer and HFBA, mass ratio of BA to MMA, reaction temperature and the initiator on the polymerization technology and the performance of the product, were investigated and optimized. The structure and performance of the fluorocarbon polymer emulsion were characterized and tested with FTIR, TEM, MFT and contact angle and water absorption of the latex film. The experimental results show that the optimal conditions for preparing fluorocarbon polymer emulsion are as follows： for preparing the oligomer, tool ratio of BA to MAA is equal to 1.0 ： 1.60, and pH value is controlled within the range of 8.0 and 9.0; for preparing fluorocarbon polymer emulsion, the added amount of oligmer[P（BA/MANa）] is 6%; mass ratio of BA to MMA is 40 ＂ 60; the added amount of self-crosslinked monomer is 2%, the added amount of HFBA is 15 %; reaction temperature is 80 ℃; the mixture of potassium persulfate and sodium bisulfite is used as the initiator. The film-forming stability of the fluorocarbon polymer emul- sion and the performance of the latex film, which is prepared with the soap-free emulsion polymerization, are better than that prepared with the conventional emulsion polymerization.展开更多
Effect of low-frequency power on F, CF2 relative density and F/CF2 ratio, in C2F6, C4F8 and CHF3 dual-frequency capacitively couple discharge driven by the power of 13.56 MHz/2 MHz, was investigated by using optical e...Effect of low-frequency power on F, CF2 relative density and F/CF2 ratio, in C2F6, C4F8 and CHF3 dual-frequency capacitively couple discharge driven by the power of 13.56 MHz/2 MHz, was investigated by using optical emission spectroscopy. High F, CF2 relative density and high F/CF2 ratio were obtained in a CHF3 plasma. But for C2F6 and C4Fs plasmas, the F, CF2 relative density and F/CF2 ratio all decreased significantly due to the difference in both reactive paths and reactive energy. The increase of LF power caused simultaneous increase of F and CF2 radical relative densities in C4Fs and CHF3 plasmas, but led to increase of F with the decrease in CF2 relative densities in C2F6 plasma due to the increase of lower energy electrons and the decrease of higher energy electrons in electron energy distribution function （EEDF）.展开更多
Plasma polymerized fluorocarbon （FC） films have been deposited on silicon substrates from dielectric barrier discharge （DBD） plasma of C4Fs at room temperature under a pressure of 25～125 Pa. The effects of the di...Plasma polymerized fluorocarbon （FC） films have been deposited on silicon substrates from dielectric barrier discharge （DBD） plasma of C4Fs at room temperature under a pressure of 25～125 Pa. The effects of the discharge pressure and frequency of power supply on the films have been systematically investigated. FC films with a less cross linked structure may be formed at a relatively high pressure. Increase in the frequency of power supply leads to a significant increase in the deposition rate. Static contact angle measurements show that deposited FC films have a stable, hydrophobic surface property. All deposited films show smooth surfaces with an atomic surface roughness. The relationship between plasma parameters and the properties of the deposited FC films are discussed.展开更多
A research and test system for the carbon anode plate preparation technology was established to optimize the physical and chemical indicators of carbon anode plates,such as bulk density,resistivity,and compressive str...A research and test system for the carbon anode plate preparation technology was established to optimize the physical and chemical indicators of carbon anode plates,such as bulk density,resistivity,and compressive strength,and improve the operating cycle.In this study,a carbon plate was prepared via a combination of high-temperature molding and freeze drying using a formulation with asphalt content much lower than the industry standard.The experimental results show that the density of the carbon plate is increased by 0.02-0.04 g/cm^(3)by improving the drying method.The carbon plate prepared in the laboratory has a bulk density of 1.814 g/cm^(3),resistivity of 29.8μΩ·m,and compressive strength of 89.27 MPa.The bulk density,room-temperature resistivity,compressive strength,graphitization,and other key indices of the carbon plates made in the laboratory and those procured from a factory in Shanxi,Datong,were tested.Additionally,the specimens were analyzed using thermogravimetry-differential scanning calorimetry,scanning electron microscopy,and X-ray fluorescence.The laboratory-made carbon plates were superior to the factory specimens in terms of all the indicators tested.The process in this study improves the performance of the carbon anode plate and is used to provide technical support for electrolytic fluorine production in enterprises.The carbon plates prepared in the laboratory fully meet the process requirements of a medium-temperature electrolytic fluorine production line,which indicates the possibility of its use in the stable production of fluorine gas.展开更多
The PVC/EBBA ultrathin composite membranes with thickness of about 100 nm were prepared by spreading the solution on water surface. The overlapped composite membrane showed a characteristic aggregation structure in wh...The PVC/EBBA ultrathin composite membranes with thickness of about 100 nm were prepared by spreading the solution on water surface. The overlapped composite membrane showed a characteristic aggregation structure in which the polymer matrix exists as a three-dimensional spongy network and the liquid crystal domains werc observed. Tne surface modification for the overlapped membranes was carried out by means of plasma-polymerization with the monomers of fluorocarbon compounds. Both Arrhenius plots of permeability coefficients for oxygen ((?)_O_2) in the membrane samples before and after modification showed significant increase in the vicinity of the T_(KN) of EBBA.展开更多
Fluorocarbonate is one of the most important RE minerals in the earth With the increment model developed by Zheng, oxygen isotope fractionation of RE fluorocarbonates is discussed and the 18 O enrichment orde...Fluorocarbonate is one of the most important RE minerals in the earth With the increment model developed by Zheng, oxygen isotope fractionation of RE fluorocarbonates is discussed and the 18 O enrichment order is obtained as follows: bastnaesite>cordylite>Ca 0 5 BaCe 2(CO 3) 4F>baiyuneboite>huangheite>cebaite Combining with the calculated equation, the oxygen isotopic compositions in RE fluorocarbonate from Bayan Obo ore deposit is discussed, and a better accordance of 18 O enrichment order with actual data on ore forming temperature with the ore deposit geology are found Because Ba RE fluorocarbonate could be considered as a stacking of CeCO 3F and BaCO 3 layers in the direction c , oxygen isotope fractionation in this stacking is discussed, and I in zhonghuacerite and cordylite is predicted with this model展开更多
The domain structures in calcium-cerium fluorocarbonate mineral series from a rare earth mineral deposit within an aegirine alkali granite massif in Mianning County, Sichuan Province, China, were studied by means of t...The domain structures in calcium-cerium fluorocarbonate mineral series from a rare earth mineral deposit within an aegirine alkali granite massif in Mianning County, Sichuan Province, China, were studied by means of transmission electron microscopy. Many categories of domain structures in this mineral series were observed and investigated, including the microtwin domains of parisite-6R(2) and B2S-6R, the antiphase domains of B2S-2H. The results show that the antiphase domains which are faults along crystal plane (0001) are formed by the displacement of crystal lattice in c * direction and the displacement is 0.471 nm. A new polytype (B4S2-3R) of regular mixed-layer structure with B4S2 type is found in the domain region of mixed-layer structure.展开更多
The microstructural characteristics of syntactic polycrystal in the calcium rare earth fluorocarbonate minerals from Southwest China have been studied by means of selected area electron diffraction and high resolutio...The microstructural characteristics of syntactic polycrystal in the calcium rare earth fluorocarbonate minerals from Southwest China have been studied by means of selected area electron diffraction and high resolution electron microscopy(HREM). The complication of the heterogeneous fabric of the minerals have been revealed by HREM. The results show that the crystal structure of the minerals was formed by a disorder stacking of the unit layers of bast naesite and synchisite in the calcium rare earth fluorocarbonate minerals along c direction. The stacking fault and other crystal defects in the syntactic polycrystal have been discussed.展开更多
The microstructural features of clacium rare earth(Ca RE) fluorocarbonate minerals from Southwest China were studied by using selected area electron diffraction(SAED) and high resolution transmission electron micros...The microstructural features of clacium rare earth(Ca RE) fluorocarbonate minerals from Southwest China were studied by using selected area electron diffraction(SAED) and high resolution transmission electron microscopy(HRTEM). Three new regularly mixed layer structures of B 8S 6 type with long period and different stacking sequence, i.e. B 8S 6 Ⅰ, B 8S 6 Ⅱ, and B 8S 6 Ⅲ, were found in the derived polycrystal of parisite, in which their structural symmetry, cell parameters, chemical formulas of crystal and stacking models of structural unit layer, etc. were determined. The results of this study also show that these new regularly mixed layer structrues were formed by order stacking unit layer of bastnaesite(B) and synchisite(S) in varying proportion along c axis. The observation under HRTEM reveals that in the three new regularly mixed layer structures there are different distribution modes of Ce F ion layers, CO 2- 3 ion groups between the Ce F ion layers, and CO 2- 3 ion groups between Ce F and Ca 2+ ion layers, and there are some heterogeneous textures, such as disorder interlayer and stacking fault. It further proves the complexity of the crystal structure of the Ca RE fluorocarbonate minerals.展开更多
We investigated photoluminescence characteristics of silicone oils treated by C2F6 and CHF3 plasma. The silicone oil treated by the C2F6 plasma emitted a white light mainly composed of 415 nm, 469 nm, and 554 nm emiss...We investigated photoluminescence characteristics of silicone oils treated by C2F6 and CHF3 plasma. The silicone oil treated by the C2F6 plasma emitted a white light mainly composed of 415 nm, 469 nm, and 554 nm emissions, while that treated by the CHF3 plasma emitted a pink light （415 nm）. Fourier transformed infrared spectroscopy and Raman spectroscopy studies showed that the photoluminescence was correlated with the Si-C bond, the carbon-related defects and the oxygen vacancies. It was suggested that the light emitting at 554 nm was related to the Si-C bond and the carbon-related defects, while the pink emission at 415 nm was related to the oxygen vacancies.展开更多
Introduction: Partial liquid ventilation may benefit the lung disease in preterm neonates but intratracheal instillation of perfluorocarbon increases cerebral blood flow and may cause brain injury. We aimed to determi...Introduction: Partial liquid ventilation may benefit the lung disease in preterm neonates but intratracheal instillation of perfluorocarbon increases cerebral blood flow and may cause brain injury. We aimed to determine if the effects of perfluorocarbon administration on cerebral blood flow vary by dose-volume, rate of administration, endotracheal tube portal of entry, or closely targeting PaCO2. Methods: Forty-two dosing events (in eleven rabbits) were randomised to different dosing strategies, including a sham (i.e., placebo/control) dose of air over 20 min, 20 mL/kg of perfluorocarbon slowly over 20 min, 10 mL/kg of perfluorocarbon slowly over 20 min, 10 mL/kg of perfluorocarbon moderately fast over 10 min, 10 mL/kg of perfluorocarbon rapidly over 5 min, 10 mL/kg of perfluorocarbon slowly over 20 min via the endotracheal tube tip lumen (as opposed to the proximal end of the tube used in all other groups), or 10 mL/kg of perfluorocarbon slowly over 20 min whilst targeting a PaCO2 of 45 - 50 mmHg. Blood gases, haemodynamics, cortical cerebral blood flow and carotid flow were recorded continuously for 30 minutes from the start of each dose. Results: Carotid flow increased with 20 mL/kg perfluorocarbon and cortical cerebral blood flow was significantly more variable. Carotid and cortical cerebral blood flow increased using 10 mL/kg or 20 mL/kg with no difference between the two dose-volumes. There was no difference in cerebral blood flow by rate of administration, but carotid blood flow was more variable during slow administration. There were no differences in the increase in cerebral blood flow by portal of entry. If PaCO2 was maintained between 45 - 50 mmHg there was no increase in cerebral blood flow and there was less variable carotid flow. Conclusions: Cerebral blood flow increases with perfluorocarbon dosing. This occurs regardless of the dose-volume of perfluorocarbon. These effects were mitigated by closely targeting PaCO2.展开更多
The interaction between surfactants and fluorocarbon-modified polyacrylamide (FC-PAM) in aqueous solutionswas evaluated by rheological means and fluorescence spectroscopy and was found to be strong regardless of the s...The interaction between surfactants and fluorocarbon-modified polyacrylamide (FC-PAM) in aqueous solutionswas evaluated by rheological means and fluorescence spectroscopy and was found to be strong regardless of the surfactant'snature. Two representative surfactants, anionic sodium dodecyl sulfate (SDS) and nonionic Triton X-100, were used. The origin of the interaction and its dependence on the surfactant concentration were discussed.展开更多
Atmospheric fluorocarbon plasma plays an important role in the surface modification of insulating materials like polymers.The existing fluorocarbon plasma is usually generated by dielectric barrier discharge,which has...Atmospheric fluorocarbon plasma plays an important role in the surface modification of insulating materials like polymers.The existing fluorocarbon plasma is usually generated by dielectric barrier discharge,which has a low concentration of reactive species and may cause insufficient surface fluorination.This work attempts to develop an atmospheric fluorocarbon plasma jet using a coaxial transmission line resonator by microwave discharge with locally enhanced electric field and high density.The gas temperature is reduced by pulse modulation technology.Three kinds of working gases,pure CF_(4),Ar/CF_(4)and He/CF_(4),are utilized to generate the atmospheric microwave fluorocarbon plasma jet.The discharge images,optical emission spectra,electron densities and gas temperatures are studied experimentally.The results show that the Ar/CF_(4)plasma jet has the best comprehensive performance,such as strong discharge intensity and controllable gas temperature.The electron density of the Ar/CF_4plasma jet has a magnitude of 10~(20)m^(-3),indicating a higher density than that of the frequently used dielectric barrier discharge.With the other conditions unchanged,the gas temperature at the end of the Ar/CF_(4)plasma jet can be reduced from 410.2 to 347.3 K by decreasing the duty cycle of the modulated pulse from 0.5 to 0.1.Thence,the microwave Ar/CF_(4)plasma jet is considered to be a promising fluorocarbon plasma source for surface fluorination of polymers.展开更多
n-Hexane is widely used in industrial production as an organic solvent. As an industrial exhaust gas, the contribution of n-hexane to air pollution and damage to human health are attracting increasing attention. In th...n-Hexane is widely used in industrial production as an organic solvent. As an industrial exhaust gas, the contribution of n-hexane to air pollution and damage to human health are attracting increasing attention. In the present study, aqueous solutions of two fluorocarbon surfactants（FSN100 and FSO100） were investigated for their properties of solubilization and dynamic absorption of n-hexane, as well as their capacity for regeneration and n-hexane recovery by thermal distillation. The results show that the two fluorocarbon surfactants enhance dissolution and absorption of n-hexane, and their effectiveness is closely related to their concentrations in solution. For low concentration solutions（0.01%–0.30%）, the partition coefficient decreases dramatically and the saturation capacity increases significantly with increasing concentration, but the changes for both are more modest when the concentration is over 0.30%. The FSO100 solution presents a smaller partition coefficient and a greater saturation capacity than the FSN100 solution at the same concentration,indicating a stronger solubilization for n-hexane. Thermal distillation is a feasible method to recover n-hexane from these absorption solutions, and to regenerate them. With 90 sec heating at 80–85°C, the recovery of n-hexane ranges between 81% and 85%, and the regenerated absorption solution maintains its original performance during reuse. This study provides basic information on two fluorocarbon surfactants for application in the treatment of industrial n-hexane waste gases.展开更多
REE-fluorocarbonates as major REE minerals in the Bayan Obo deposit, the largestREE deposit in the world, were analyzed for their stable isotopic compositions. The δ13C andδ18O values of huanghoite, cebaite and bast...REE-fluorocarbonates as major REE minerals in the Bayan Obo deposit, the largestREE deposit in the world, were analyzed for their stable isotopic compositions. The δ13C andδ18O values of huanghoite, cebaite and bastnaesite from late-stage veins vary in the ranges of -7. 8 - - 4. 0‰ and 6. 7 - 9. 4‰ respectively. These data are relatively similar tO those ofbastnaesites from banded ores: δ13C - 5. 6 - - 5. 2‰ and δ18O 3. 6 - 5. 5‰ The REEfluorocarbonates from both late-stage veins and banded ores are characterized by lower δ13C andδ18O values, especially the δ18O values of bastnaesites from banded ores. Compared with them,the disseminated bastnaesits the dolomite-type ores possess rather high δ13C and δ18O values, i.e., - 2. 1 - - O. 4‰ and 8. 6 - 12. 9‰ respectively. The high values are typical of thesedimentary host dolomite rocks as well as of the dolomite-type ores. The carbon and oxygenisotopic characteristics of REE fluorocarbonate minerals provide new evidence for the hypothesison the origin of Bayan Obo deposit-epigenetic hydrothermal metasomatism.展开更多
基金supported by the National Key Research and Development Program of China under the contract number of 2017YFB0308000Program of Innovation Academy for Green Manufacture,CAS(IAGM2020C04)+1 种基金the State Key Laboratory of Heavy Oil Processing(SKLOP201903001)Key Research and Development Program of Hebei Province,China(20374001D)。
文摘Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively separated oil–water emulsion as it was hydrophobic underwater.But its separation efficiencies(SEs)first increased to 98.9%,then dropped to 97.6%in 10 min because of oil-fouling.To tackle this problem,FM deposited with 0%–10%silica nanoparticle(NPsFMs),then coated by fluorocarbon polymer(X-[CH_(2)CH_(2)O]nCH_(2)CH_(2)O-Y-NH-COOCH_(2)C4F9)(FCNPs FMs),was used to enhance its roughness and regulate its initial wettability to improve the anti-fouling property.FCFM and FCNPs FMs were hydrophobic and oleophobic in air and oleophobic underwater.Their water contact angles,oil contact angles and oil contact angles were 115.3°–121.1°,128.8°–136.5°,and 131.6°–136.7°,respectively,meeting the requirement of 90°–140°for coalescence separation.FCNPs FM-5 had the best separation performance with a constant value of 99.8%in 10 min,while that of FCNPs FM-10 slightly decreased to 99.5%.Theoretical released droplet(TRD)diameter,calculated by the square root of the product of pore radius and fiber diameter,was used for the evaluation of coalescence performance.Analyzed by two ideal models,TRD diameter and fiber diameter showed a parabola type relationship,proving that the separation efficiency was a collaborative work of wettability,pore size and fiber diameter.Also,it explained the SEs reduction from FCNPs FM-5 to FCNPs FM-10 was revelent to the three parameters.Moreover,FCNPsFMs effectively separated emulsions stabilized by cationic surfactant CTAB(SEs:97.3%–98.4%)and anionic surfactant SDBS(SEs:91.3%–93.4%).But they had an adverse effect on nonionic surfactant Tween-80 emulsion separation(SEs:94.0%–71.76%).Emulsions made by diverse oils can be effectively separated:octane(SEs:99.4%–100%),rapeseed oil(SEs:97.3%–98.8%),and diesel(SEs:95.2%–97.0%).These findings provide new insights for designing novel materials for oil–water separation by coalescence mechanism.
文摘The effect of relative humidity on the corrosion-resisting property of fluorocarbon coating was investigated by water vapor transmission technique and electrochemical impedance spectroscopy technique. Measuremerits were carried out on samples, which were tested in an accelerated corrosion environment for the same time （300, 500, 800 and 1000 h ）. The experimental results were obtained as follows： （i） The water absorption, coating resistance and corrosion rate of metal under the coating changed with relative humidity and aging time, the results obtained by EIS are good consistent with those by water vapor transmission technique ; （ ii ） when the subject investigated presented two time constant, the goodness of fit by EEC R （ C （ R （ CR ） ） ） was inferior to that by EEC R（ C（ R（QR） ） ）, but the error of parameters acquired from the former was smaller, by which we could analyze the experiment result quantitatively. With the appearance of diffusion layer on the metal, the difference of metal capacitance was aggravated, the error of parameters acquired from EEC R（ C（ R（ C（RW） ） ） ）was bigger than that from EEC R（ C（ R（ Q（ RW） ） ） ） .
基金the financial support from the National Natural Science Foundation of China(No.20776030)
文摘Novel isosorbide derivative containing perfluorocarbon group,bi（perfluorooctanesulfonyl）isosorbide ester as chiral dopant in liquid crystal,was synthesized.Chemical structure was characterized by elemental analysis,FT-IR,~1H NMR and ^（19）F NMR.The optical texture of the mixture was observed by polarized optical microscopy（POM）.Novel chiral dopant containing perfluorocarbon group had excellent optical activity.Its specific rotation and molar rotation were noticeable higher than those of bi（4-chloromethylbenzenecarbonic）isosorbide ester.The fluorocarbon group improved the molar rotation of chiral compound and did not affect optical rotation direction.The texture of the mixture added isosorbide derivative with fluorocarbon group showed the oily streak texture.
基金Funded by the Jiangsu Provincial Creative Fund for Scientific and Tech-nical Small and Medium-size Enterprise
文摘Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free emulsion polymerization when the conception of particle design and polymer morphology was adopted. Moreover, the influence of mole ratio of BA to MAA, pH value on the oligomer was studied. And the effects of the added amount of oligomer, self-crosslinked monomer and HFBA, mass ratio of BA to MMA, reaction temperature and the initiator on the polymerization technology and the performance of the product, were investigated and optimized. The structure and performance of the fluorocarbon polymer emulsion were characterized and tested with FTIR, TEM, MFT and contact angle and water absorption of the latex film. The experimental results show that the optimal conditions for preparing fluorocarbon polymer emulsion are as follows： for preparing the oligomer, tool ratio of BA to MAA is equal to 1.0 ： 1.60, and pH value is controlled within the range of 8.0 and 9.0; for preparing fluorocarbon polymer emulsion, the added amount of oligmer[P（BA/MANa）] is 6%; mass ratio of BA to MMA is 40 ＂ 60; the added amount of self-crosslinked monomer is 2%, the added amount of HFBA is 15 %; reaction temperature is 80 ℃; the mixture of potassium persulfate and sodium bisulfite is used as the initiator. The film-forming stability of the fluorocarbon polymer emul- sion and the performance of the latex film, which is prepared with the soap-free emulsion polymerization, are better than that prepared with the conventional emulsion polymerization.
基金supported by National Natural Science Foundation of China (Nos.10975105, 10575074, 10635010)
文摘Effect of low-frequency power on F, CF2 relative density and F/CF2 ratio, in C2F6, C4F8 and CHF3 dual-frequency capacitively couple discharge driven by the power of 13.56 MHz/2 MHz, was investigated by using optical emission spectroscopy. High F, CF2 relative density and high F/CF2 ratio were obtained in a CHF3 plasma. But for C2F6 and C4Fs plasmas, the F, CF2 relative density and F/CF2 ratio all decreased significantly due to the difference in both reactive paths and reactive energy. The increase of LF power caused simultaneous increase of F and CF2 radical relative densities in C4Fs and CHF3 plasmas, but led to increase of F with the decrease in CF2 relative densities in C2F6 plasma due to the increase of lower energy electrons and the decrease of higher energy electrons in electron energy distribution function （EEDF）.
基金National Natural Science Foundation of China(No.10405005)
文摘Plasma polymerized fluorocarbon （FC） films have been deposited on silicon substrates from dielectric barrier discharge （DBD） plasma of C4Fs at room temperature under a pressure of 25～125 Pa. The effects of the discharge pressure and frequency of power supply on the films have been systematically investigated. FC films with a less cross linked structure may be formed at a relatively high pressure. Increase in the frequency of power supply leads to a significant increase in the deposition rate. Static contact angle measurements show that deposited FC films have a stable, hydrophobic surface property. All deposited films show smooth surfaces with an atomic surface roughness. The relationship between plasma parameters and the properties of the deposited FC films are discussed.
基金Funded by the National Key Research and Development Plan(No.2017YFB0307504)。
文摘A research and test system for the carbon anode plate preparation technology was established to optimize the physical and chemical indicators of carbon anode plates,such as bulk density,resistivity,and compressive strength,and improve the operating cycle.In this study,a carbon plate was prepared via a combination of high-temperature molding and freeze drying using a formulation with asphalt content much lower than the industry standard.The experimental results show that the density of the carbon plate is increased by 0.02-0.04 g/cm^(3)by improving the drying method.The carbon plate prepared in the laboratory has a bulk density of 1.814 g/cm^(3),resistivity of 29.8μΩ·m,and compressive strength of 89.27 MPa.The bulk density,room-temperature resistivity,compressive strength,graphitization,and other key indices of the carbon plates made in the laboratory and those procured from a factory in Shanxi,Datong,were tested.Additionally,the specimens were analyzed using thermogravimetry-differential scanning calorimetry,scanning electron microscopy,and X-ray fluorescence.The laboratory-made carbon plates were superior to the factory specimens in terms of all the indicators tested.The process in this study improves the performance of the carbon anode plate and is used to provide technical support for electrolytic fluorine production in enterprises.The carbon plates prepared in the laboratory fully meet the process requirements of a medium-temperature electrolytic fluorine production line,which indicates the possibility of its use in the stable production of fluorine gas.
基金Supported by the Science Fund of Academia Sinica and the National Natural Science Foundation of China
文摘The PVC/EBBA ultrathin composite membranes with thickness of about 100 nm were prepared by spreading the solution on water surface. The overlapped composite membrane showed a characteristic aggregation structure in which the polymer matrix exists as a three-dimensional spongy network and the liquid crystal domains werc observed. Tne surface modification for the overlapped membranes was carried out by means of plasma-polymerization with the monomers of fluorocarbon compounds. Both Arrhenius plots of permeability coefficients for oxygen ((?)_O_2) in the membrane samples before and after modification showed significant increase in the vicinity of the T_(KN) of EBBA.
文摘Fluorocarbonate is one of the most important RE minerals in the earth With the increment model developed by Zheng, oxygen isotope fractionation of RE fluorocarbonates is discussed and the 18 O enrichment order is obtained as follows: bastnaesite>cordylite>Ca 0 5 BaCe 2(CO 3) 4F>baiyuneboite>huangheite>cebaite Combining with the calculated equation, the oxygen isotopic compositions in RE fluorocarbonate from Bayan Obo ore deposit is discussed, and a better accordance of 18 O enrichment order with actual data on ore forming temperature with the ore deposit geology are found Because Ba RE fluorocarbonate could be considered as a stacking of CeCO 3F and BaCO 3 layers in the direction c , oxygen isotope fractionation in this stacking is discussed, and I in zhonghuacerite and cordylite is predicted with this model
文摘The domain structures in calcium-cerium fluorocarbonate mineral series from a rare earth mineral deposit within an aegirine alkali granite massif in Mianning County, Sichuan Province, China, were studied by means of transmission electron microscopy. Many categories of domain structures in this mineral series were observed and investigated, including the microtwin domains of parisite-6R(2) and B2S-6R, the antiphase domains of B2S-2H. The results show that the antiphase domains which are faults along crystal plane (0001) are formed by the displacement of crystal lattice in c * direction and the displacement is 0.471 nm. A new polytype (B4S2-3R) of regular mixed-layer structure with B4S2 type is found in the domain region of mixed-layer structure.
文摘The microstructural characteristics of syntactic polycrystal in the calcium rare earth fluorocarbonate minerals from Southwest China have been studied by means of selected area electron diffraction and high resolution electron microscopy(HREM). The complication of the heterogeneous fabric of the minerals have been revealed by HREM. The results show that the crystal structure of the minerals was formed by a disorder stacking of the unit layers of bast naesite and synchisite in the calcium rare earth fluorocarbonate minerals along c direction. The stacking fault and other crystal defects in the syntactic polycrystal have been discussed.
文摘The microstructural features of clacium rare earth(Ca RE) fluorocarbonate minerals from Southwest China were studied by using selected area electron diffraction(SAED) and high resolution transmission electron microscopy(HRTEM). Three new regularly mixed layer structures of B 8S 6 type with long period and different stacking sequence, i.e. B 8S 6 Ⅰ, B 8S 6 Ⅱ, and B 8S 6 Ⅲ, were found in the derived polycrystal of parisite, in which their structural symmetry, cell parameters, chemical formulas of crystal and stacking models of structural unit layer, etc. were determined. The results of this study also show that these new regularly mixed layer structrues were formed by order stacking unit layer of bastnaesite(B) and synchisite(S) in varying proportion along c axis. The observation under HRTEM reveals that in the three new regularly mixed layer structures there are different distribution modes of Ce F ion layers, CO 2- 3 ion groups between the Ce F ion layers, and CO 2- 3 ion groups between Ce F and Ca 2+ ion layers, and there are some heterogeneous textures, such as disorder interlayer and stacking fault. It further proves the complexity of the crystal structure of the Ca RE fluorocarbonate minerals.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.10975105 and 11075114)
文摘We investigated photoluminescence characteristics of silicone oils treated by C2F6 and CHF3 plasma. The silicone oil treated by the C2F6 plasma emitted a white light mainly composed of 415 nm, 469 nm, and 554 nm emissions, while that treated by the CHF3 plasma emitted a pink light （415 nm）. Fourier transformed infrared spectroscopy and Raman spectroscopy studies showed that the photoluminescence was correlated with the Si-C bond, the carbon-related defects and the oxygen vacancies. It was suggested that the light emitting at 554 nm was related to the Si-C bond and the carbon-related defects, while the pink emission at 415 nm was related to the oxygen vacancies.
文摘Introduction: Partial liquid ventilation may benefit the lung disease in preterm neonates but intratracheal instillation of perfluorocarbon increases cerebral blood flow and may cause brain injury. We aimed to determine if the effects of perfluorocarbon administration on cerebral blood flow vary by dose-volume, rate of administration, endotracheal tube portal of entry, or closely targeting PaCO2. Methods: Forty-two dosing events (in eleven rabbits) were randomised to different dosing strategies, including a sham (i.e., placebo/control) dose of air over 20 min, 20 mL/kg of perfluorocarbon slowly over 20 min, 10 mL/kg of perfluorocarbon slowly over 20 min, 10 mL/kg of perfluorocarbon moderately fast over 10 min, 10 mL/kg of perfluorocarbon rapidly over 5 min, 10 mL/kg of perfluorocarbon slowly over 20 min via the endotracheal tube tip lumen (as opposed to the proximal end of the tube used in all other groups), or 10 mL/kg of perfluorocarbon slowly over 20 min whilst targeting a PaCO2 of 45 - 50 mmHg. Blood gases, haemodynamics, cortical cerebral blood flow and carotid flow were recorded continuously for 30 minutes from the start of each dose. Results: Carotid flow increased with 20 mL/kg perfluorocarbon and cortical cerebral blood flow was significantly more variable. Carotid and cortical cerebral blood flow increased using 10 mL/kg or 20 mL/kg with no difference between the two dose-volumes. There was no difference in cerebral blood flow by rate of administration, but carotid blood flow was more variable during slow administration. There were no differences in the increase in cerebral blood flow by portal of entry. If PaCO2 was maintained between 45 - 50 mmHg there was no increase in cerebral blood flow and there was less variable carotid flow. Conclusions: Cerebral blood flow increases with perfluorocarbon dosing. This occurs regardless of the dose-volume of perfluorocarbon. These effects were mitigated by closely targeting PaCO2.
基金This work was financially supported by 973 Project (G19990225).
文摘The interaction between surfactants and fluorocarbon-modified polyacrylamide (FC-PAM) in aqueous solutionswas evaluated by rheological means and fluorescence spectroscopy and was found to be strong regardless of the surfactant'snature. Two representative surfactants, anionic sodium dodecyl sulfate (SDS) and nonionic Triton X-100, were used. The origin of the interaction and its dependence on the surfactant concentration were discussed.
基金partly supported by National Natural Science Foundation of China(Nos.52207147 and 52177126)the Anhui Provincial Natural Science Foundation(Nos.2208085QE168 and 2108085ME180)the Anhui Provincial Natural Science Research Project of Higher Education(No.2022AH050301)。
文摘Atmospheric fluorocarbon plasma plays an important role in the surface modification of insulating materials like polymers.The existing fluorocarbon plasma is usually generated by dielectric barrier discharge,which has a low concentration of reactive species and may cause insufficient surface fluorination.This work attempts to develop an atmospheric fluorocarbon plasma jet using a coaxial transmission line resonator by microwave discharge with locally enhanced electric field and high density.The gas temperature is reduced by pulse modulation technology.Three kinds of working gases,pure CF_(4),Ar/CF_(4)and He/CF_(4),are utilized to generate the atmospheric microwave fluorocarbon plasma jet.The discharge images,optical emission spectra,electron densities and gas temperatures are studied experimentally.The results show that the Ar/CF_(4)plasma jet has the best comprehensive performance,such as strong discharge intensity and controllable gas temperature.The electron density of the Ar/CF_4plasma jet has a magnitude of 10~(20)m^(-3),indicating a higher density than that of the frequently used dielectric barrier discharge.With the other conditions unchanged,the gas temperature at the end of the Ar/CF_(4)plasma jet can be reduced from 410.2 to 347.3 K by decreasing the duty cycle of the modulated pulse from 0.5 to 0.1.Thence,the microwave Ar/CF_(4)plasma jet is considered to be a promising fluorocarbon plasma source for surface fluorination of polymers.
基金supported by Guangdong Natural Science Funds for Distinguished Young Scholar (No. S2013050014122)Guangzhou Institute of Geochemistry, Chinese Academy of Sciences (No. 2012-03) (135 project)No. IS-2062 from GIGGAS
文摘n-Hexane is widely used in industrial production as an organic solvent. As an industrial exhaust gas, the contribution of n-hexane to air pollution and damage to human health are attracting increasing attention. In the present study, aqueous solutions of two fluorocarbon surfactants（FSN100 and FSO100） were investigated for their properties of solubilization and dynamic absorption of n-hexane, as well as their capacity for regeneration and n-hexane recovery by thermal distillation. The results show that the two fluorocarbon surfactants enhance dissolution and absorption of n-hexane, and their effectiveness is closely related to their concentrations in solution. For low concentration solutions（0.01%–0.30%）, the partition coefficient decreases dramatically and the saturation capacity increases significantly with increasing concentration, but the changes for both are more modest when the concentration is over 0.30%. The FSO100 solution presents a smaller partition coefficient and a greater saturation capacity than the FSN100 solution at the same concentration,indicating a stronger solubilization for n-hexane. Thermal distillation is a feasible method to recover n-hexane from these absorption solutions, and to regenerate them. With 90 sec heating at 80–85°C, the recovery of n-hexane ranges between 81% and 85%, and the regenerated absorption solution maintains its original performance during reuse. This study provides basic information on two fluorocarbon surfactants for application in the treatment of industrial n-hexane waste gases.
文摘REE-fluorocarbonates as major REE minerals in the Bayan Obo deposit, the largestREE deposit in the world, were analyzed for their stable isotopic compositions. The δ13C andδ18O values of huanghoite, cebaite and bastnaesite from late-stage veins vary in the ranges of -7. 8 - - 4. 0‰ and 6. 7 - 9. 4‰ respectively. These data are relatively similar tO those ofbastnaesites from banded ores: δ13C - 5. 6 - - 5. 2‰ and δ18O 3. 6 - 5. 5‰ The REEfluorocarbonates from both late-stage veins and banded ores are characterized by lower δ13C andδ18O values, especially the δ18O values of bastnaesites from banded ores. Compared with them,the disseminated bastnaesits the dolomite-type ores possess rather high δ13C and δ18O values, i.e., - 2. 1 - - O. 4‰ and 8. 6 - 12. 9‰ respectively. The high values are typical of thesedimentary host dolomite rocks as well as of the dolomite-type ores. The carbon and oxygenisotopic characteristics of REE fluorocarbonate minerals provide new evidence for the hypothesison the origin of Bayan Obo deposit-epigenetic hydrothermal metasomatism.
