Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. On...Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.展开更多
A nonlinear multi-scale interaction(NMI)model was proposed and developed by the first author for nearly 30 years to represent the evolution of atmospheric blocking.In this review paper,we first review the creation and...A nonlinear multi-scale interaction(NMI)model was proposed and developed by the first author for nearly 30 years to represent the evolution of atmospheric blocking.In this review paper,we first review the creation and development of the NMI model and then emphasize that the NMI model represents a new tool for identifying the basic physics of how climate change influences mid-to-high latitude weather extremes.The building of the NMI model took place over three main periods.In the 1990s,a nonlinear Schr?dinger(NLS)equation model was presented to describe atmospheric blocking as a wave packet;however,it could not depict the lifetime(10-20 days)of atmospheric blocking.In the 2000s,we proposed an NMI model of atmospheric blocking in a uniform basic flow by making a scale-separation assumption and deriving an eddyforced NLS equation.This model succeeded in describing the life cycle of atmospheric blocking.In the 2020s,the NMI model was extended to include the impact of a changing climate mainly by altering the basic zonal winds and the magnitude of the meridional background potential vorticity gradient(PVy).Model results show that when PVy is smaller,blocking has a weaker dispersion and a stronger nonlinearity,so blocking can be more persistent and have a larger zonal scale and weaker eastward movement,thus favoring stronger weather extremes.However,when PVy is much smaller and below a critical threshold under much stronger winter Arctic warming of global warming,atmospheric blocking becomes locally less persistent and shows a much stronger westward movement,which acts to inhibit local cold extremes.Such a case does not happen in summer under global warming because PVy fails to fall below the critical threshold.Thus,our theory indicates that global warming can render summer-blocking anticyclones and mid-to-high latitude heatwaves more persistent,intense,and widespread.展开更多
This study examines the advent of agent interaction(AIx)as a transformative paradigm in humancomputer interaction(HCI),signifying a notable evolution beyond traditional graphical interfaces and touchscreen interaction...This study examines the advent of agent interaction(AIx)as a transformative paradigm in humancomputer interaction(HCI),signifying a notable evolution beyond traditional graphical interfaces and touchscreen interactions.Within the context of large models,AIx is characterized by its innovative interaction patterns and a plethora of application scenarios that hold great potential.The paper highlights the pivotal role of AIx in shaping the future landscape of the large model industry,emphasizing its adoption and necessity from a user's perspective.This study underscores the pivotal role of AIx in dictating the future trajectory of a large model industry by emphasizing the importance of its adoption and necessity from a user-centric perspective.The fundamental drivers of AIx include the introduction of novel capabilities,replication of capabilities(both anthropomorphic and superhuman),migration of capabilities,aggregation of intelligence,and multiplication of capabilities.These elements are essential for propelling innovation,expanding the frontiers of capability,and realizing the exponential superposition of capabilities,thereby mitigating labor redundancy and addressing a spectrum of human needs.Furthermore,this study provides an in-depth analysis of the structural components and operational mechanisms of agents supported by large models.Such advancements significantly enhance the capacity of agents to tackle complex problems and provide intelligent services,thereby facilitating a more intuitive,adaptive,and personalized engagement between humans and machines.The study further delineates four principal categories of interaction patterns that encompass eight distinct modalities of interaction,corresponding to twenty-one specific scenarios,including applications in smart home systems,health assistance,and elderly care.This emphasizes the significance of this new paradigm in advancing HCI,fostering technological advancements,and redefining user experiences.However,it also acknowledges the challenges and ethical considerations that accompany this paradigm shift,recognizing the need for a balanced approach to harness the full potential of AIx in modern society.展开更多
The study of virus-host interactions has been significantly advanced using model organisms,with nematodes being a prominent example.Caenorhabditis elegans(C.elegans)nematodes have provided valuable insights into the m...The study of virus-host interactions has been significantly advanced using model organisms,with nematodes being a prominent example.Caenorhabditis elegans(C.elegans)nematodes have provided valuable insights into the mechanisms of viral infections,host defense strategies,and the development of antiviral therapies.With the discovery of natural viral pathogens of nematodes,Orsay virus,Le Blanc virus,Santeuil virus,and Mělník virus,the exploration of the virus-host interaction model based on nematodes has entered a new era.The virus-host interaction network consists of viruses,hosts,and the antagonistic effects of viruses on host immunity.The nematode virus-host interaction model is a concrete manifestation used to study the complex relationships among these three elements.Previous studies have indicated that during the entire process of nematode infection by viruses,antiviral RNA interference(RNAi)plays a crucial role.Additionally,the host’s innate immune responses,such as the antiviral-specific intracellular pathogen response(IPR)and certain signaling pathways homologous to those in humans,are particularly important in the natural immune and antiviral processes of nematodes.These processes are regulated by multiple genes in the host.The reverse genetics system for Orsay virus has been successfully developed to study viral gene function and virus-host interactions.Nematodes serve as simple host models for understanding RNA virus replication,related cellular components,and virus-host interaction mechanisms.These findings will likely contribute to the development of antiviral treatment strategies based on novel targets.展开更多
Understanding microbial-host interactions in the oral cavity is essential for elucidating oral disease pathogenesis and its systemic implications.In vitro bacteria-host cell coculture models have enabled fundamental s...Understanding microbial-host interactions in the oral cavity is essential for elucidating oral disease pathogenesis and its systemic implications.In vitro bacteria-host cell coculture models have enabled fundamental studies to characterize bacterial infection and host responses in a reductionist yet reproducible manner.However,existing in vitro coculture models fail to establish conditions that are suitable for the growth of both mammalian cells and anaerobes,thereby hindering a comprehensive understanding of their interactions.Here,we present an asymmetric gas coculture system that simulates the oral microenvironment by maintaining distinct normoxic and anaerobic conditions for gingival epithelial cells and anaerobic bacteria,respectively.Using a key oral pathobiont,Fusobacterium nucleatum,as the primary test bed,we demonstrate that the system preserves bacterial viability and supports the integrity of telomerase-immortalized gingival keratinocytes.Compared to conventional models,this system enhanced bacterial invasion,elevated intracellular bacterial loads,and elicited more robust host pro-inflammatory responses,including increased secretion of CXCL10,IL-6,and IL-8.In addition,the model enabled precise evaluation of antibiotic efficacy against intracellular pathogens.Finally,we validate the ability of the asymmetric system to support the proliferation of a more oxygen-sensitive oral pathobiont,Porphyromonas gingivalis.These results underscore the utility of this coculture platform for studying oral microbial pathogenesis and screening therapeutics,offering a physiologically relevant approach to advance oral and systemic health research.展开更多
The complex behaviors of expansive soils,particularly their volumetric changes driven by moisture variations,pose significant challenges in urban geotechnical engineering.Although vegetation-induced moisture changes a...The complex behaviors of expansive soils,particularly their volumetric changes driven by moisture variations,pose significant challenges in urban geotechnical engineering.Although vegetation-induced moisture changes are known to affect ground movement,quantitative characterization of tree–soil interactions remains limited due to insufficient field data and unclear relationships between tree water uptake and soil response.This study investigates the mechanical behavior of expansive clay soils influenced by two Lophostemon confertus samples during a 14-month field monitoring program in Melbourne,Australia.The research methodology integrates measurements of soil displacement,total soil suction,moisture content,and tree water consumption through instrumentation and monitoring systems.Field measurements suggest that tree roots reached the limits of their water extraction capacity when total soil suction exceeded 2880 kPa within the active root zone.The spatial extent of tree-induced soil desiccation reached 0.6–0.7 times the tree height laterally and penetrated to depths of 2.5–3.3 m vertically.The mature sample,with an 86%greater crown area and a threefold larger sapwood area,exhibited 142%higher water consumption(35 kL),demonstrating the scalability of tree–soil interaction mechanisms.A multiple linear regression model was developed to quantify the coupled relationships between soil movement and key variables,achieving a high adjusted R2 value of 0.97,which provides engineers and practitioners with a practical tool for estimating ground movement near trees.These findings offer valuable insights for infrastructure design in tree-adjacent environments and can inform computational models and design codes to enable more accurate site assessments and sustainable urban development.展开更多
The crossover between short-range and long-range(LR)universal behaviors remains a central theme in the physics of LR interacting systems.The competition between LR coupling and the Berezinskii-Kosterlitz-Thouless mech...The crossover between short-range and long-range(LR)universal behaviors remains a central theme in the physics of LR interacting systems.The competition between LR coupling and the Berezinskii-Kosterlitz-Thouless mechanism makes the problem more subtle and less understood in the two-dimensional(2D)XY model,a cornerstone for investigating low-dimensional phenomena and their implications in quantum computation.We study the 2D XY model with algebraically decaying interaction~1/r^(2+σ).Utilizing an advanced update strategy,we conduct LR Monte Carlo simulations of the model up to a linear size of L=8192.Our results demonstrate continuous phase transitions into a ferromagnetic phase forσ<2,which exhibit the simultaneous emergence of a long-ranged order and a power-law decaying correlation function due to the Goldstone mode.Furthermore,we fnd logarithmic scaling behaviors in the low-temperature phase atσ=2.The observed scaling behaviors in the low-temperature phase forσ≤2 agree with our theoretical analysis.Our fndings request further theoretical understanding and can be of practical application in cutting-edge experiments like Rydberg atom arrays.展开更多
The multi-dimensional interactive teaching model significantly enhances the effectiveness of college English instruction by emphasizing dynamic engagement between teachers and students,as well as among students themse...The multi-dimensional interactive teaching model significantly enhances the effectiveness of college English instruction by emphasizing dynamic engagement between teachers and students,as well as among students themselves.This paper explores practical strategies for implementing this model,focusing on four key aspects:deepening teachers’understanding of the model through continuous learning,innovating interactive methods such as questioning techniques and practical activities,leveraging modern technology to integrate resources and track learning progress,and establishing a communication platform that centers on student participation.By adopting these approaches,the model fosters a student-centered classroom environment,improves comprehensive English application skills,and optimizes overall teaching quality.展开更多
This study reviews light-responsive polymers in various applications,including drug delivery,information storage,sensor,self-healing material,antibacterial or anti-fouling,and environmental applications.Light-responsi...This study reviews light-responsive polymers in various applications,including drug delivery,information storage,sensor,self-healing material,antibacterial or anti-fouling,and environmental applications.Light-responsive polymers are a new material type being developed for various medical,electronics,engineering,and environmental applications.The working principle of light-responsive materials is based on metalligand interactions or non-covalent interactions between polymer functional groups,metal ions,and other filler functional groups.Light irradiation causes physical and mechanical changes in drug delivery and antibacterial systems,which results in the materials releasing more drugs or antibacterial substances.When materials in information storage devices and sensors are exposed to light,they can change color or glow.This has been applied for data storage to reveal QR codes under UV light.Additionally,this review discusses the thermodynamic aspects and computer modeling of light-responsive materials to emphasize the importance and development of these materials.Finally,light-responsive polymer development for various applications is presented.展开更多
The quantitative trait loci(QTL)-by-environment(Q × E) interaction effect is hard to detect because there are no effective ways to control the genomic background. In this study, we propose a linear mixed model th...The quantitative trait loci(QTL)-by-environment(Q × E) interaction effect is hard to detect because there are no effective ways to control the genomic background. In this study, we propose a linear mixed model that simultaneously analyzes data from multiple environments to detect Q × E interactions. This model incorporates two different kinship matrices derived from the genome-wide markers to control both main and interaction polygenic background effects. Simulation studies demonstrate that our approach is more powerful than the meta-analysis and inclusive composite interval mapping methods. We further analyze four agronomic traits of rice across four environments. A main effect QTL is identified for 1000-grain weight(KGW), while no QTL are found for tiller number. Additionally, a large QTL with a significant Q × E interaction is detected on chromosome 7 affecting grain number, yield, and KGW. This region harbors two important genes, PROG1 and Ghd7. Furthermore, we apply our mixed model to analyze lodging in barley across six environments. The six regions exhibiting Q × E interaction effects identified by our approach overlap with the SNPs previously identified using EM and MCMC-based Bayesian methods, further validating the robustness of our approach. Both simulation studies and empirical data analyses show that our method outperforms all other methods compared.展开更多
A three-dimensional numerical model of sand wave dynamics,incorporating the interaction of currents and waves at various angles,has been developed using the Regional Ocean Modeling System(ROMS).This model accounts for...A three-dimensional numerical model of sand wave dynamics,incorporating the interaction of currents and waves at various angles,has been developed using the Regional Ocean Modeling System(ROMS).This model accounts for both bedload and suspended load sediment transport under combined waves and current conditions.The investigation examines the influence of several key parameters,including the rotation angle of sand waves relative to the main current,tidal current velocity amplitude,residual current,water depth,wave height,wave period,and wave direction,on sand wave evolution.The growth rate and migration rate of sand waves decrease as their rotation angle increases.For rotation angles smaller than 15°,sand wave evolution can be effectively simulated by a vertical 2D model with an error within 10%.The numerical results demonstrate that variations in tidal current velocity amplitude or residual current affect both vertical growth and horizontal migration of sand waves.As tidal current velocity amplitude and residual current increase,the growth rate initially rises to a maximum before decreasing.The migration rate shows a consistent increase with increasing tidal current amplitude and residual current.Under combined waves and current,both growth and migration rates decrease as water depth increases.With increasing wave height and period,the growth rate and migration rate initially rise to maximum values before declining,while showing a consistent increase with wave height and period.The change rate of sand waves reaches its maximum when wave propagation aligns parallel to tidal currents,and reaches its minimum when wave propagation is perpendicular to the currents.This phenomenon can be explained by the fluctuation of total bed shear stress relative to the angle of interaction between waves and current.展开更多
Clarifying the gas ingestion mechanism in the turbine disc cavity of marine gas turbines is crucial for ensuring the normal operation of turbines.However, the ingestion is influenced by factors such as the rotational ...Clarifying the gas ingestion mechanism in the turbine disc cavity of marine gas turbines is crucial for ensuring the normal operation of turbines.However, the ingestion is influenced by factors such as the rotational pumping effect, mainstream pressure asymmetry, rotor–stator interaction,and unsteady flow structures, complicating the flow. To investigate the impact of rotor–stator interaction on ingestion, this paper decouples the model to include only the mainstream. This research employs experiments and numerical simulations to examine the effects of varying the flow coefficient through changes in rotational speed and mainstream flow rate. The main objective is to understand the influence of different rotor–stator interactions on the mainstream pressure field, accompanied by mechanistic explanations. The findings reveal inconsistent effects of the two methods for changing the flow coefficient on the mainstream pressure field. Particularly, the pressure distribution on the vane side primarily depends on the mainstream flow rate, while the pressure on the blade side is influenced by the mainstream flow rate and the attack angle represented by the flow coefficient. A larger angle of attack angle can increase pressure on the blade side, even surpassing the pressure on the vane side. Assessing the degree of mainstream pressure unevenness solely based on the pressure difference on the vane side is insufficient. This research provides a basis for subsequent studies on the influence of coupled real turbine rotor–stator interaction on gas ingestion.展开更多
This research presents the square root sum of squares response of displacements and tunnel moments under the Kobe and Loma Prieta seismic excitations with a peak ground acceleration of 0.05 g for various dry relative ...This research presents the square root sum of squares response of displacements and tunnel moments under the Kobe and Loma Prieta seismic excitations with a peak ground acceleration of 0.05 g for various dry relative densities of local sand in Bangladesh.For this reason,a one-dimensional gravitational shake table test was performed after calibration to determine the seismic performance of the concrete tunnel-sand-pile interaction model.A vertical 40 kg load was applied on each pile cap along with the seismic excitations.The experimental results obtained were compared with the previous numerical study conducted by using field data so as to better interpret the variations of results.In the case of vertical sand displacement,the ratio between the previous field data obtained through numerical study and the present study is found to be 0.96.Moreover,the experimental results were compared with the 3D full-scale numerical analysis results of Plaxis considering the Mohr-Coulomb constitutive model of sand.Variations of experimental and numerical results show a satisfactory level of alignment with the previously published work.According to the shake table test results,the lateral displacement of the tunnel is greater than the vertical displacement because of the transverse directional seismic excitation on the tunnel body.The minimum difference between lateral and vertical displacements of the tunnel is found to be 31%for a relative density of 27%under the Loma Prieta earthquake.However,this research may be advanced in the future by considering various peak ground accelerations,tunnel-pile clearance,and geometric properties.展开更多
In this paper, we study the flocking behavior of a thermodynamic Cucker–Smale model with local velocity interactions. Using the spectral gap of a connected stochastic matrix, together with an elaborate estimate on pe...In this paper, we study the flocking behavior of a thermodynamic Cucker–Smale model with local velocity interactions. Using the spectral gap of a connected stochastic matrix, together with an elaborate estimate on perturbations of a linearized system, we provide a sufficient framework in terms of initial data and model parameters to guarantee flocking. Moreover, it is shown that the system achieves a consensus at an exponential rate.展开更多
The sloping seabed affects the bearing capacity and failure mechanism of soil,which may compromise the stability and safety of offshore structures such as jack-up platforms.This paper employs a coupled model combining...The sloping seabed affects the bearing capacity and failure mechanism of soil,which may compromise the stability and safety of offshore structures such as jack-up platforms.This paper employs a coupled model combining the material point method and finite element method(MPM-FEM)to analyze the impact of sloping seabeds on the three-dimensional soil-spudcan interaction.The MPM-FEM model implements the B¯approach to solve the challenge of volumetric locking due to the incompressibility constraints imposed by yield criterion.It is validated against the centrifuge results.The effects of sloping seabeds on penetration resistance,soil flow pattern,lateral response,stress distribution,and failure mechanism are discussed.The soil mainly undergoes overall failure when the ratio of penetration depth to spudcan diameter(i.e.D P/D)is between 0 and 0.25.As the slope angle increases,the soil on the side of lower slope is expelled further,resulting in an asymmetric stress distribution and a larger horizontal sliding force of soil.When D P/D increases to 0.75,the soil transitions to localized plastic flow failure,and the range of soil flow affected by the spudcan penetration decreases.The results show that,when the slope angle increases,the lateral displacement and stress distribution on the lower slope of a sloping seabed is significantly larger than that of a horizontal seabed,impacting the spudcan and surrounding soil behavior.The study suggests that the seabed slope significantly affects the range of soil flow and failure at shallow penetration,indicating that the slope angle should be taken into account in the design and installation of offshore jack-up rigs,particularly in areas with sloping seabeds.展开更多
Based on the principle of vehicle-track coupling dynamics, SIMPACK multi-body dynamics software is used to establish a C80 wagon line-coupled multi-body dynamics model with 73 degrees of freedom. And the reasonablenes...Based on the principle of vehicle-track coupling dynamics, SIMPACK multi-body dynamics software is used to establish a C80 wagon line-coupled multi-body dynamics model with 73 degrees of freedom. And the reasonableness of the line-coupled dynamics model is verified by using the maximum residual acceleration, the nonlinear critical speed of the wagon. The experimental results show that the established vehicle line coupling dynamics model meets the requirements of vehicle line coupling dynamics modeling.展开更多
Based on the molecular interaction volume model （MIVM）, the activities of components of Pb Sn Sb ternary alloy were predicted. The vapo^liquid phase equilibrium of Pb-Sn-Sb alloy system was calculated using the acti...Based on the molecular interaction volume model （MIVM）, the activities of components of Pb Sn Sb ternary alloy were predicted. The vapo^liquid phase equilibrium of Pb-Sn-Sb alloy system was calculated using the activity coefficients of Pb Sn-Sb alloy system in the process of vacuum distillation. The calculated results show that the content of Sn in vapor phase increases with the increasing distillation temperature and content of Sn in liquid phase. However, the content of Sn in vapor phase is only 0.45% （mass fraction） while 97% in liquid phase at 1100 ℃, which shows that the separating effect is very well. Experimental investigations on the separation of Pb-Sn-Sb ternary alloy were carried out in the distillation temperature range of 1100-1300 ℃ under vacuum condition. It is found that the Sn content in vapor phase is 0.54% while 97% in liquid phase at 1100 ℃. Finally, the predicted data were compared with the experimental results showing good agreement with each other.展开更多
A genetic model was proposed for simultaneously analyzing genetic effects of nuclear, cytoplasm, and nuclear-cytoplasmic interaction （NCI） as well as their genotype by environment （GE） interaction for quantitative...A genetic model was proposed for simultaneously analyzing genetic effects of nuclear, cytoplasm, and nuclear-cytoplasmic interaction （NCI） as well as their genotype by environment （GE） interaction for quantitative traits of diploid plants. In the model, the NCI effects were further partitioned into additive and dominance nuclear-cytoplasmic interaction components. Mixed linear model approaches were used for statistical analysis. On the basis of diallel cross designs, Monte Carlo simulations showed that the genetic model was robust for estimating variance components under several situations without specific effects. Random genetic effects were predicted by an adjusted unbiased prediction （AUP） method. Data on four quantitative traits （boll number, lint percentage, fiber length, and micronaire） in Upland cotton （Gossypium hirsutum L.） were analyzed as a worked example to show the effectiveness of the model.展开更多
The multi-body flexible morphing airfoil can improve the aerodynamic characteristics based on different flight missions continuously.Recently researches have focused on the unsteady aerodynamic characteristics of flex...The multi-body flexible morphing airfoil can improve the aerodynamic characteristics based on different flight missions continuously.Recently researches have focused on the unsteady aerodynamic characteristics of flexible wings under passive actuation.However,the unsteady aerodynamic characteristics with the fluid-structure interaction effects in the multi-body active actuation process of morphing airfoil deserve further investigation.In this paper,a fluid-structure coupled simulation method for multi-body flexible morphing airfoil with active actuation subsystem was investigated,and the aerodynamic characteristics during deformation were compared with different skin flexibility,flow field environment,actuation mode and actuation time.The numerical results show that for the steady aerodynamic,the skin flexibility can improve the stability efficiency.In the unsteady process,the change trend of the transient lift coefficient and pitching moment are consistent with those of the active drive characteristics,while the instantaneous lift-drag ratio coefficient is greatly affected by the driving mode and can be improved by increasing the driving duration.展开更多
Fluid-structure interaction(FSI)of gas-liquid two-phase fow in the horizontal pipe is investigated numerically in the present study.The volume of fluid model and standard k-e turbulence model are integrated to simulat...Fluid-structure interaction(FSI)of gas-liquid two-phase fow in the horizontal pipe is investigated numerically in the present study.The volume of fluid model and standard k-e turbulence model are integrated to simulate the typical gas-liquid two-phase fow patterns.First,validation of the numerical model is conducted and the typical fow patterns are consistent with the Baker chart.Then,the FSI framework is established to investigate the dynamic responses of the interaction between the horizontal pipe and gas-liquid two-phase fow.The results show that the dynamic response under stratified fow condition is relatively flat and the maximum pipe deformation and equivalent stress are 1.8 mm and 7.5 MPa respectively.Meanwhile,the dynamic responses induced by slug fow,wave fow and annular fow show obvious periodic fuctuations.Furthermore,the dynamic response characteristics under slug flow condition are maximum;the maximum pipe deformation and equivalent stress can reach 4mm and 17.5 MPa,respectively.The principal direction of total deformation is different under various flow patterns.Therefore,the periodic equivalent stress will form the cyclic impact on the pipe wall and affect the fatigue life of the horizontal pipe.The present study may serve as a reference for FSI simulation under gas-liquid two-phase transport conditions.展开更多
基金supported by National Basic Research Program of China(973 Program,Grant No. 2009CB724304)Key Research Program of the State Key Laboratory of Tribology of Tsinghua University,China (Grant No. SKLT08A06)National Natural Science Foundation of China(Grant No. 50975157)
文摘Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.
基金supported by the National Natural Science Foundation of China(Grant Nos.42150204 and 2288101)supported by the China National Postdoctoral Program for Innovative Talents(BX20230045)the China Postdoctoral Science Foundation(2023M730279)。
文摘A nonlinear multi-scale interaction(NMI)model was proposed and developed by the first author for nearly 30 years to represent the evolution of atmospheric blocking.In this review paper,we first review the creation and development of the NMI model and then emphasize that the NMI model represents a new tool for identifying the basic physics of how climate change influences mid-to-high latitude weather extremes.The building of the NMI model took place over three main periods.In the 1990s,a nonlinear Schr?dinger(NLS)equation model was presented to describe atmospheric blocking as a wave packet;however,it could not depict the lifetime(10-20 days)of atmospheric blocking.In the 2000s,we proposed an NMI model of atmospheric blocking in a uniform basic flow by making a scale-separation assumption and deriving an eddyforced NLS equation.This model succeeded in describing the life cycle of atmospheric blocking.In the 2020s,the NMI model was extended to include the impact of a changing climate mainly by altering the basic zonal winds and the magnitude of the meridional background potential vorticity gradient(PVy).Model results show that when PVy is smaller,blocking has a weaker dispersion and a stronger nonlinearity,so blocking can be more persistent and have a larger zonal scale and weaker eastward movement,thus favoring stronger weather extremes.However,when PVy is much smaller and below a critical threshold under much stronger winter Arctic warming of global warming,atmospheric blocking becomes locally less persistent and shows a much stronger westward movement,which acts to inhibit local cold extremes.Such a case does not happen in summer under global warming because PVy fails to fall below the critical threshold.Thus,our theory indicates that global warming can render summer-blocking anticyclones and mid-to-high latitude heatwaves more persistent,intense,and widespread.
文摘This study examines the advent of agent interaction(AIx)as a transformative paradigm in humancomputer interaction(HCI),signifying a notable evolution beyond traditional graphical interfaces and touchscreen interactions.Within the context of large models,AIx is characterized by its innovative interaction patterns and a plethora of application scenarios that hold great potential.The paper highlights the pivotal role of AIx in shaping the future landscape of the large model industry,emphasizing its adoption and necessity from a user's perspective.This study underscores the pivotal role of AIx in dictating the future trajectory of a large model industry by emphasizing the importance of its adoption and necessity from a user-centric perspective.The fundamental drivers of AIx include the introduction of novel capabilities,replication of capabilities(both anthropomorphic and superhuman),migration of capabilities,aggregation of intelligence,and multiplication of capabilities.These elements are essential for propelling innovation,expanding the frontiers of capability,and realizing the exponential superposition of capabilities,thereby mitigating labor redundancy and addressing a spectrum of human needs.Furthermore,this study provides an in-depth analysis of the structural components and operational mechanisms of agents supported by large models.Such advancements significantly enhance the capacity of agents to tackle complex problems and provide intelligent services,thereby facilitating a more intuitive,adaptive,and personalized engagement between humans and machines.The study further delineates four principal categories of interaction patterns that encompass eight distinct modalities of interaction,corresponding to twenty-one specific scenarios,including applications in smart home systems,health assistance,and elderly care.This emphasizes the significance of this new paradigm in advancing HCI,fostering technological advancements,and redefining user experiences.However,it also acknowledges the challenges and ethical considerations that accompany this paradigm shift,recognizing the need for a balanced approach to harness the full potential of AIx in modern society.
基金supported by National Undergraduate Training Programs for Innovation and Entrepreneurship of Ministry of Education,China.
文摘The study of virus-host interactions has been significantly advanced using model organisms,with nematodes being a prominent example.Caenorhabditis elegans(C.elegans)nematodes have provided valuable insights into the mechanisms of viral infections,host defense strategies,and the development of antiviral therapies.With the discovery of natural viral pathogens of nematodes,Orsay virus,Le Blanc virus,Santeuil virus,and Mělník virus,the exploration of the virus-host interaction model based on nematodes has entered a new era.The virus-host interaction network consists of viruses,hosts,and the antagonistic effects of viruses on host immunity.The nematode virus-host interaction model is a concrete manifestation used to study the complex relationships among these three elements.Previous studies have indicated that during the entire process of nematode infection by viruses,antiviral RNA interference(RNAi)plays a crucial role.Additionally,the host’s innate immune responses,such as the antiviral-specific intracellular pathogen response(IPR)and certain signaling pathways homologous to those in humans,are particularly important in the natural immune and antiviral processes of nematodes.These processes are regulated by multiple genes in the host.The reverse genetics system for Orsay virus has been successfully developed to study viral gene function and virus-host interactions.Nematodes serve as simple host models for understanding RNA virus replication,related cellular components,and virus-host interaction mechanisms.These findings will likely contribute to the development of antiviral treatment strategies based on novel targets.
基金supported by National Science Foundation CAREER (2238972)National Institute of Dental and Craniofacial Research awards (R03DE031329 and R01DE030943)The Translational Tissue Modeling Laboratory is supported by the University of Michigan (Center for Gastrointestinal Research,Office of the Dean, Comprehensive Cancer Center, and the Departments of Pathology, Pharmacology, and Internal Medicine) with additional funding from the Endowment for Basic Sciences
文摘Understanding microbial-host interactions in the oral cavity is essential for elucidating oral disease pathogenesis and its systemic implications.In vitro bacteria-host cell coculture models have enabled fundamental studies to characterize bacterial infection and host responses in a reductionist yet reproducible manner.However,existing in vitro coculture models fail to establish conditions that are suitable for the growth of both mammalian cells and anaerobes,thereby hindering a comprehensive understanding of their interactions.Here,we present an asymmetric gas coculture system that simulates the oral microenvironment by maintaining distinct normoxic and anaerobic conditions for gingival epithelial cells and anaerobic bacteria,respectively.Using a key oral pathobiont,Fusobacterium nucleatum,as the primary test bed,we demonstrate that the system preserves bacterial viability and supports the integrity of telomerase-immortalized gingival keratinocytes.Compared to conventional models,this system enhanced bacterial invasion,elevated intracellular bacterial loads,and elicited more robust host pro-inflammatory responses,including increased secretion of CXCL10,IL-6,and IL-8.In addition,the model enabled precise evaluation of antibiotic efficacy against intracellular pathogens.Finally,we validate the ability of the asymmetric system to support the proliferation of a more oxygen-sensitive oral pathobiont,Porphyromonas gingivalis.These results underscore the utility of this coculture platform for studying oral microbial pathogenesis and screening therapeutics,offering a physiologically relevant approach to advance oral and systemic health research.
基金funded by the Australian Research Council via the ARC Linkage(Grant No.LP16160100649).
文摘The complex behaviors of expansive soils,particularly their volumetric changes driven by moisture variations,pose significant challenges in urban geotechnical engineering.Although vegetation-induced moisture changes are known to affect ground movement,quantitative characterization of tree–soil interactions remains limited due to insufficient field data and unclear relationships between tree water uptake and soil response.This study investigates the mechanical behavior of expansive clay soils influenced by two Lophostemon confertus samples during a 14-month field monitoring program in Melbourne,Australia.The research methodology integrates measurements of soil displacement,total soil suction,moisture content,and tree water consumption through instrumentation and monitoring systems.Field measurements suggest that tree roots reached the limits of their water extraction capacity when total soil suction exceeded 2880 kPa within the active root zone.The spatial extent of tree-induced soil desiccation reached 0.6–0.7 times the tree height laterally and penetrated to depths of 2.5–3.3 m vertically.The mature sample,with an 86%greater crown area and a threefold larger sapwood area,exhibited 142%higher water consumption(35 kL),demonstrating the scalability of tree–soil interaction mechanisms.A multiple linear regression model was developed to quantify the coupled relationships between soil movement and key variables,achieving a high adjusted R2 value of 0.97,which provides engineers and practitioners with a practical tool for estimating ground movement near trees.These findings offer valuable insights for infrastructure design in tree-adjacent environments and can inform computational models and design codes to enable more accurate site assessments and sustainable urban development.
基金supported by the National Natural Science Foundation of China(Grant Nos.12204173 and 12275263)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0301900)supported by the Natural Science Foundation of Fujian Province 802 of China(Grant No.2023J02032)。
文摘The crossover between short-range and long-range(LR)universal behaviors remains a central theme in the physics of LR interacting systems.The competition between LR coupling and the Berezinskii-Kosterlitz-Thouless mechanism makes the problem more subtle and less understood in the two-dimensional(2D)XY model,a cornerstone for investigating low-dimensional phenomena and their implications in quantum computation.We study the 2D XY model with algebraically decaying interaction~1/r^(2+σ).Utilizing an advanced update strategy,we conduct LR Monte Carlo simulations of the model up to a linear size of L=8192.Our results demonstrate continuous phase transitions into a ferromagnetic phase forσ<2,which exhibit the simultaneous emergence of a long-ranged order and a power-law decaying correlation function due to the Goldstone mode.Furthermore,we fnd logarithmic scaling behaviors in the low-temperature phase atσ=2.The observed scaling behaviors in the low-temperature phase forσ≤2 agree with our theoretical analysis.Our fndings request further theoretical understanding and can be of practical application in cutting-edge experiments like Rydberg atom arrays.
文摘The multi-dimensional interactive teaching model significantly enhances the effectiveness of college English instruction by emphasizing dynamic engagement between teachers and students,as well as among students themselves.This paper explores practical strategies for implementing this model,focusing on four key aspects:deepening teachers’understanding of the model through continuous learning,innovating interactive methods such as questioning techniques and practical activities,leveraging modern technology to integrate resources and track learning progress,and establishing a communication platform that centers on student participation.By adopting these approaches,the model fosters a student-centered classroom environment,improves comprehensive English application skills,and optimizes overall teaching quality.
基金the Franco-Thai Cooperation Programme in Higher Education and Research(Franco-Thai Mobility Programme/PHC SIAM)Year 2024-2025。
文摘This study reviews light-responsive polymers in various applications,including drug delivery,information storage,sensor,self-healing material,antibacterial or anti-fouling,and environmental applications.Light-responsive polymers are a new material type being developed for various medical,electronics,engineering,and environmental applications.The working principle of light-responsive materials is based on metalligand interactions or non-covalent interactions between polymer functional groups,metal ions,and other filler functional groups.Light irradiation causes physical and mechanical changes in drug delivery and antibacterial systems,which results in the materials releasing more drugs or antibacterial substances.When materials in information storage devices and sensors are exposed to light,they can change color or glow.This has been applied for data storage to reveal QR codes under UV light.Additionally,this review discusses the thermodynamic aspects and computer modeling of light-responsive materials to emphasize the importance and development of these materials.Finally,light-responsive polymer development for various applications is presented.
基金supported by the National Key Research and Development Programs of China(2024YFF1000100 and 2021YFD1301102)the National Natural Science Foundation of China (32172702)+3 种基金the State Key Laboratory of Animal Biotech Breeding (XQSWYZQZ-KFYX-4)Zaozhuang Elite Industrial Innovation ProgramAgricultural Science and Technology Innovation Program (ASTIP-IAS-TS-6)supported by the United States National Science Foundation (NSF) Collaborative Research Grant (DBI-1458515)
文摘The quantitative trait loci(QTL)-by-environment(Q × E) interaction effect is hard to detect because there are no effective ways to control the genomic background. In this study, we propose a linear mixed model that simultaneously analyzes data from multiple environments to detect Q × E interactions. This model incorporates two different kinship matrices derived from the genome-wide markers to control both main and interaction polygenic background effects. Simulation studies demonstrate that our approach is more powerful than the meta-analysis and inclusive composite interval mapping methods. We further analyze four agronomic traits of rice across four environments. A main effect QTL is identified for 1000-grain weight(KGW), while no QTL are found for tiller number. Additionally, a large QTL with a significant Q × E interaction is detected on chromosome 7 affecting grain number, yield, and KGW. This region harbors two important genes, PROG1 and Ghd7. Furthermore, we apply our mixed model to analyze lodging in barley across six environments. The six regions exhibiting Q × E interaction effects identified by our approach overlap with the SNPs previously identified using EM and MCMC-based Bayesian methods, further validating the robustness of our approach. Both simulation studies and empirical data analyses show that our method outperforms all other methods compared.
基金the National Natural Science Foundation of China(Grant Nos.52371289 and 51979192).
文摘A three-dimensional numerical model of sand wave dynamics,incorporating the interaction of currents and waves at various angles,has been developed using the Regional Ocean Modeling System(ROMS).This model accounts for both bedload and suspended load sediment transport under combined waves and current conditions.The investigation examines the influence of several key parameters,including the rotation angle of sand waves relative to the main current,tidal current velocity amplitude,residual current,water depth,wave height,wave period,and wave direction,on sand wave evolution.The growth rate and migration rate of sand waves decrease as their rotation angle increases.For rotation angles smaller than 15°,sand wave evolution can be effectively simulated by a vertical 2D model with an error within 10%.The numerical results demonstrate that variations in tidal current velocity amplitude or residual current affect both vertical growth and horizontal migration of sand waves.As tidal current velocity amplitude and residual current increase,the growth rate initially rises to a maximum before decreasing.The migration rate shows a consistent increase with increasing tidal current amplitude and residual current.Under combined waves and current,both growth and migration rates decrease as water depth increases.With increasing wave height and period,the growth rate and migration rate initially rise to maximum values before declining,while showing a consistent increase with wave height and period.The change rate of sand waves reaches its maximum when wave propagation aligns parallel to tidal currents,and reaches its minimum when wave propagation is perpendicular to the currents.This phenomenon can be explained by the fluctuation of total bed shear stress relative to the angle of interaction between waves and current.
基金the National Natural Science Foundation Outstanding Youth Foundation (Grant No.52122603)the National Science and Technology Major Project (J2019-Ⅲ-0003–0046)。
文摘Clarifying the gas ingestion mechanism in the turbine disc cavity of marine gas turbines is crucial for ensuring the normal operation of turbines.However, the ingestion is influenced by factors such as the rotational pumping effect, mainstream pressure asymmetry, rotor–stator interaction,and unsteady flow structures, complicating the flow. To investigate the impact of rotor–stator interaction on ingestion, this paper decouples the model to include only the mainstream. This research employs experiments and numerical simulations to examine the effects of varying the flow coefficient through changes in rotational speed and mainstream flow rate. The main objective is to understand the influence of different rotor–stator interactions on the mainstream pressure field, accompanied by mechanistic explanations. The findings reveal inconsistent effects of the two methods for changing the flow coefficient on the mainstream pressure field. Particularly, the pressure distribution on the vane side primarily depends on the mainstream flow rate, while the pressure on the blade side is influenced by the mainstream flow rate and the attack angle represented by the flow coefficient. A larger angle of attack angle can increase pressure on the blade side, even surpassing the pressure on the vane side. Assessing the degree of mainstream pressure unevenness solely based on the pressure difference on the vane side is insufficient. This research provides a basis for subsequent studies on the influence of coupled real turbine rotor–stator interaction on gas ingestion.
文摘This research presents the square root sum of squares response of displacements and tunnel moments under the Kobe and Loma Prieta seismic excitations with a peak ground acceleration of 0.05 g for various dry relative densities of local sand in Bangladesh.For this reason,a one-dimensional gravitational shake table test was performed after calibration to determine the seismic performance of the concrete tunnel-sand-pile interaction model.A vertical 40 kg load was applied on each pile cap along with the seismic excitations.The experimental results obtained were compared with the previous numerical study conducted by using field data so as to better interpret the variations of results.In the case of vertical sand displacement,the ratio between the previous field data obtained through numerical study and the present study is found to be 0.96.Moreover,the experimental results were compared with the 3D full-scale numerical analysis results of Plaxis considering the Mohr-Coulomb constitutive model of sand.Variations of experimental and numerical results show a satisfactory level of alignment with the previously published work.According to the shake table test results,the lateral displacement of the tunnel is greater than the vertical displacement because of the transverse directional seismic excitation on the tunnel body.The minimum difference between lateral and vertical displacements of the tunnel is found to be 31%for a relative density of 27%under the Loma Prieta earthquake.However,this research may be advanced in the future by considering various peak ground accelerations,tunnel-pile clearance,and geometric properties.
文摘In this paper, we study the flocking behavior of a thermodynamic Cucker–Smale model with local velocity interactions. Using the spectral gap of a connected stochastic matrix, together with an elaborate estimate on perturbations of a linearized system, we provide a sufficient framework in terms of initial data and model parameters to guarantee flocking. Moreover, it is shown that the system achieves a consensus at an exponential rate.
基金supported by the start-up funding from Tsinghua University(Grant No.100005014).
文摘The sloping seabed affects the bearing capacity and failure mechanism of soil,which may compromise the stability and safety of offshore structures such as jack-up platforms.This paper employs a coupled model combining the material point method and finite element method(MPM-FEM)to analyze the impact of sloping seabeds on the three-dimensional soil-spudcan interaction.The MPM-FEM model implements the B¯approach to solve the challenge of volumetric locking due to the incompressibility constraints imposed by yield criterion.It is validated against the centrifuge results.The effects of sloping seabeds on penetration resistance,soil flow pattern,lateral response,stress distribution,and failure mechanism are discussed.The soil mainly undergoes overall failure when the ratio of penetration depth to spudcan diameter(i.e.D P/D)is between 0 and 0.25.As the slope angle increases,the soil on the side of lower slope is expelled further,resulting in an asymmetric stress distribution and a larger horizontal sliding force of soil.When D P/D increases to 0.75,the soil transitions to localized plastic flow failure,and the range of soil flow affected by the spudcan penetration decreases.The results show that,when the slope angle increases,the lateral displacement and stress distribution on the lower slope of a sloping seabed is significantly larger than that of a horizontal seabed,impacting the spudcan and surrounding soil behavior.The study suggests that the seabed slope significantly affects the range of soil flow and failure at shallow penetration,indicating that the slope angle should be taken into account in the design and installation of offshore jack-up rigs,particularly in areas with sloping seabeds.
文摘Based on the principle of vehicle-track coupling dynamics, SIMPACK multi-body dynamics software is used to establish a C80 wagon line-coupled multi-body dynamics model with 73 degrees of freedom. And the reasonableness of the line-coupled dynamics model is verified by using the maximum residual acceleration, the nonlinear critical speed of the wagon. The experimental results show that the established vehicle line coupling dynamics model meets the requirements of vehicle line coupling dynamics modeling.
基金Project(2012CB722803) supported by the National Basic Research Program of ChinaProject(2011FA008) supported by the Key Projectof Science and Technology Program of Yunnan Province,China
文摘Based on the molecular interaction volume model （MIVM）, the activities of components of Pb Sn Sb ternary alloy were predicted. The vapo^liquid phase equilibrium of Pb-Sn-Sb alloy system was calculated using the activity coefficients of Pb Sn-Sb alloy system in the process of vacuum distillation. The calculated results show that the content of Sn in vapor phase increases with the increasing distillation temperature and content of Sn in liquid phase. However, the content of Sn in vapor phase is only 0.45% （mass fraction） while 97% in liquid phase at 1100 ℃, which shows that the separating effect is very well. Experimental investigations on the separation of Pb-Sn-Sb ternary alloy were carried out in the distillation temperature range of 1100-1300 ℃ under vacuum condition. It is found that the Sn content in vapor phase is 0.54% while 97% in liquid phase at 1100 ℃. Finally, the predicted data were compared with the experimental results showing good agreement with each other.
基金This work was supported by Chinese National Programs for High Technology Research and Development(973 Program)(No.2004CB117306).
文摘A genetic model was proposed for simultaneously analyzing genetic effects of nuclear, cytoplasm, and nuclear-cytoplasmic interaction （NCI） as well as their genotype by environment （GE） interaction for quantitative traits of diploid plants. In the model, the NCI effects were further partitioned into additive and dominance nuclear-cytoplasmic interaction components. Mixed linear model approaches were used for statistical analysis. On the basis of diallel cross designs, Monte Carlo simulations showed that the genetic model was robust for estimating variance components under several situations without specific effects. Random genetic effects were predicted by an adjusted unbiased prediction （AUP） method. Data on four quantitative traits （boll number, lint percentage, fiber length, and micronaire） in Upland cotton （Gossypium hirsutum L.） were analyzed as a worked example to show the effectiveness of the model.
基金supported by the National Natural Science Foundation of China(Nos.52192633,11872293)the Natural Science Foundation of Shaanxi Province,China(No.2022JC-03)。
文摘The multi-body flexible morphing airfoil can improve the aerodynamic characteristics based on different flight missions continuously.Recently researches have focused on the unsteady aerodynamic characteristics of flexible wings under passive actuation.However,the unsteady aerodynamic characteristics with the fluid-structure interaction effects in the multi-body active actuation process of morphing airfoil deserve further investigation.In this paper,a fluid-structure coupled simulation method for multi-body flexible morphing airfoil with active actuation subsystem was investigated,and the aerodynamic characteristics during deformation were compared with different skin flexibility,flow field environment,actuation mode and actuation time.The numerical results show that for the steady aerodynamic,the skin flexibility can improve the stability efficiency.In the unsteady process,the change trend of the transient lift coefficient and pitching moment are consistent with those of the active drive characteristics,while the instantaneous lift-drag ratio coefficient is greatly affected by the driving mode and can be improved by increasing the driving duration.
基金the National Natural Science Foundation of China(No.51779143)the Oceanic Interdisciplinary Program of Shanghai Jiao Tong University(No.SL2020ZD101)the Cultivation of Scientific Research Ability of Young Talents of Shanghai Jiao Tong University(No.19X100040072)。
文摘Fluid-structure interaction(FSI)of gas-liquid two-phase fow in the horizontal pipe is investigated numerically in the present study.The volume of fluid model and standard k-e turbulence model are integrated to simulate the typical gas-liquid two-phase fow patterns.First,validation of the numerical model is conducted and the typical fow patterns are consistent with the Baker chart.Then,the FSI framework is established to investigate the dynamic responses of the interaction between the horizontal pipe and gas-liquid two-phase fow.The results show that the dynamic response under stratified fow condition is relatively flat and the maximum pipe deformation and equivalent stress are 1.8 mm and 7.5 MPa respectively.Meanwhile,the dynamic responses induced by slug fow,wave fow and annular fow show obvious periodic fuctuations.Furthermore,the dynamic response characteristics under slug flow condition are maximum;the maximum pipe deformation and equivalent stress can reach 4mm and 17.5 MPa,respectively.The principal direction of total deformation is different under various flow patterns.Therefore,the periodic equivalent stress will form the cyclic impact on the pipe wall and affect the fatigue life of the horizontal pipe.The present study may serve as a reference for FSI simulation under gas-liquid two-phase transport conditions.
