To study the temperature distribution and thermal-stress field in different service stages, a two-dimensional model of a turbine blade with thermal barrier coatings is developed, in which the conjugate heat transfer a...To study the temperature distribution and thermal-stress field in different service stages, a two-dimensional model of a turbine blade with thermal barrier coatings is developed, in which the conjugate heat transfer analysis and the decoupled thermal-stress calculation method are adopted. Based on the simulation results, it is found that a non-uniform distribution of temperature appears in different positions of the blade surface, which has directly impacted on stress field. The maximum temperature with a value of 1030 ℃ occurs at the leading edge. During the steady stage, the maximum stress of thermally grown oxide （TGO） appears in the middle of the suction side, reaching 3.75 GPa. At the end stage of cooling, the maximum compressive stress of TGO with a value of-3.5 GPa occurs at the leading edge. Thus, it can be predicted that during the steady stage the dangerous regions may locate at the suction side, while the leadine edge mav be more Drone to failure on cooling.展开更多
Currently, when magnesium alloy sheet is rolled, the method of controlling roll temperature is simple and inaccurate. Furthermore, roll temperature has a large influence on the quality of magnesium alloy sheet; theref...Currently, when magnesium alloy sheet is rolled, the method of controlling roll temperature is simple and inaccurate. Furthermore, roll temperature has a large influence on the quality of magnesium alloy sheet; therefore, a new model using circular fluid flow control roll temperature has been designed. A fluid heat transfer structure was designed, the heat transfer process model of the fluid heating roll was simplified, and the finite di erence method was used to cal?culate the heat transfer process. Fluent software was used to simulate the fluid?solid coupling heat transfer, and both the trend and regularity of the temperature field in the heat transfer process were identified. The results show that the heating e ciency was much higher than traditional heating methods(when the fluid heat of the roll and tempera?ture distribution of the roll surface was more uniform). Moreover, there was a bigger temperature di erence between the input and the output, and after using reverse flow the temperature di erence decreased. The axial and circum?ferential temperature distributions along the sheet were uniform. Both theoretical calculation results and numerical simulation results of the heat transfer between fluid and roll were compared. The error was 1.8%–12.3%, showing that the theoretical model can both forecast and regulate the temperature of the roll(for magnesium alloy sheets) in the rolling process.展开更多
As energy demand increases,the depth of mining is increasing,and methane disasters grow more serious,efficient extraction of methane is the ultimate method of preventing and controlling methane disasters.The objective...As energy demand increases,the depth of mining is increasing,and methane disasters grow more serious,efficient extraction of methane is the ultimate method of preventing and controlling methane disasters.The objectives for this research are to explore the efficiency of N_(2) injection to enhance gas extraction from coal seams(N_(2)-ECGE)and its impact on coal seam permeability.By developing a fluid-solid coupling model and using COMSOL Multiphysics to perform numerical simulations,the changes in gas pressure,methane content,gas production,output rate and permeability of coal seams were comparatively analyzed under the two methods of direct extraction and N_(2)-ECGE.The research results show that N_(2)-ECGE can significantly improve the coal seam gas pressure and reduce the coal seam CH_(4) content,and the larger the N_(2) injection pressure the more significant the reduction effect.Meanwhile,N_(2)-ECGE can significantly increase the CH_(4) extraction and output rate,and the increase of N_(2) pressure further improves the extraction efficiency.In addition,the pressure of nitrogen injection has a remarkable effect on coal seam permeability,high pressure of nitrogen injection can increase the permeability in the time of no disturbance,but the rate of permeability decreases more quickly after disturbed.The effect of strain due to adsorption desorption on coal seam permeability dominates.Despite model construction limitations,this research offers essential theoretical and practical direction for N_(2) injection to enhance the permeability evolution law of coal seam gas extraction process.展开更多
Rockfalls in reservoirs are prone to induce surges, posing a severe threat to passing vessels and facilities. A scheme combined Single-phase freesurface method(SPF), momentum exchange method(MEM), and Lattice Boltzman...Rockfalls in reservoirs are prone to induce surges, posing a severe threat to passing vessels and facilities. A scheme combined Single-phase freesurface method(SPF), momentum exchange method(MEM), and Lattice Boltzmann method(LBM) is proposed to predict the impact of rockfall-induced surges. First, the LBM-SPF model is used to simulate the motion of the free surface, and the MEM model is used to calculate the hydrodynamic force acting on rock mass. To address the incompatibility issue arising from the coupling of LBM-SPF model and MEM model, a correction scheme inside the solid is induced. The simulation results of the single particle and double particle sedimentation in cavity show the feasibility and accuracy of the method designed in this paper. Moreover, the validation experiments of Scott Russel’s wave generator show that the proposed scheme can simulate wave profile stably. The simulation results emphasize that the waves induced by rockfalls have a significant impact on the safe operation of the Laxiwa dam and the passing vessels in the reservoir.展开更多
Paste flow patterns and microscopic particle structures were studied in a pressurized environment generated by a pulse pump.Complex loop-pipe experiments and fluid-solid coupling-based simulations were conducted.The s...Paste flow patterns and microscopic particle structures were studied in a pressurized environment generated by a pulse pump.Complex loop-pipe experiments and fluid-solid coupling-based simulations were conducted.The scanning electron microscopy technique was also applied.Results revealed that flow resistance is closely related to pipeline curvature and angle in a complex pipe network.The vertical downward-straight pipe-inclined downward combination was adopted to effectively reduce the loss in resistance along with reducing the number of bends or increasing the radius of bend curvature.The maximum velocity ratio and velocity offset values could quantitatively characterize the influences of different pipeline layouts on the resistance.The correlation reached 96%.Particle distribution and interparticle forces affected flow resistance.Uniform particle states and weak interparticle forces were conducive to steady transport.Pulse pump pressure led to high flow resistance.It could improve pipe flow stability by increasing flow uniformity and particle motion stability.These results can contribute to safe and efficient paste filling.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.51172192,11272275 and 11002122)the Natural Science Foundation of Hunan Province(Grant No.11JJ4003)the Doctoral Scientific Research Foundation of Xiangtan University(Grant Nos.KZ08022,KZ03013 and KF20140303)
文摘To study the temperature distribution and thermal-stress field in different service stages, a two-dimensional model of a turbine blade with thermal barrier coatings is developed, in which the conjugate heat transfer analysis and the decoupled thermal-stress calculation method are adopted. Based on the simulation results, it is found that a non-uniform distribution of temperature appears in different positions of the blade surface, which has directly impacted on stress field. The maximum temperature with a value of 1030 ℃ occurs at the leading edge. During the steady stage, the maximum stress of thermally grown oxide （TGO） appears in the middle of the suction side, reaching 3.75 GPa. At the end stage of cooling, the maximum compressive stress of TGO with a value of-3.5 GPa occurs at the leading edge. Thus, it can be predicted that during the steady stage the dangerous regions may locate at the suction side, while the leadine edge mav be more Drone to failure on cooling.
基金National Natural Science Foundation of China(Grant No.U1510131)Key Research and Development Projects of Shanxi Province of China(Grant Nos.201603D121010,201603D111004)+3 种基金Science and Technology Project of Jin Cheng City of China(Grant No.20155010)Youth Program of National Natural Science Fund of China(Grant No.51604181)Project of Young Scholar of Shanxi ProvinceLeading Talent Project of Innovative Entrepreneurial Team of Jiangsu Province(Grant No.51501122)
文摘Currently, when magnesium alloy sheet is rolled, the method of controlling roll temperature is simple and inaccurate. Furthermore, roll temperature has a large influence on the quality of magnesium alloy sheet; therefore, a new model using circular fluid flow control roll temperature has been designed. A fluid heat transfer structure was designed, the heat transfer process model of the fluid heating roll was simplified, and the finite di erence method was used to cal?culate the heat transfer process. Fluent software was used to simulate the fluid?solid coupling heat transfer, and both the trend and regularity of the temperature field in the heat transfer process were identified. The results show that the heating e ciency was much higher than traditional heating methods(when the fluid heat of the roll and tempera?ture distribution of the roll surface was more uniform). Moreover, there was a bigger temperature di erence between the input and the output, and after using reverse flow the temperature di erence decreased. The axial and circum?ferential temperature distributions along the sheet were uniform. Both theoretical calculation results and numerical simulation results of the heat transfer between fluid and roll were compared. The error was 1.8%–12.3%, showing that the theoretical model can both forecast and regulate the temperature of the roll(for magnesium alloy sheets) in the rolling process.
基金supported by the National Natural Science Foundation of China(52374249,52130409,52121003)the National Key R&D Program(2023YFC3009003)+1 种基金the Basic Research Business Fees for Central Universities(2024JCCXAQ01)Open Fund of State Key Laboratory of Coal Mine Disaster Dynamics and Control(2011DA105287-FW202303).
文摘As energy demand increases,the depth of mining is increasing,and methane disasters grow more serious,efficient extraction of methane is the ultimate method of preventing and controlling methane disasters.The objectives for this research are to explore the efficiency of N_(2) injection to enhance gas extraction from coal seams(N_(2)-ECGE)and its impact on coal seam permeability.By developing a fluid-solid coupling model and using COMSOL Multiphysics to perform numerical simulations,the changes in gas pressure,methane content,gas production,output rate and permeability of coal seams were comparatively analyzed under the two methods of direct extraction and N_(2)-ECGE.The research results show that N_(2)-ECGE can significantly improve the coal seam gas pressure and reduce the coal seam CH_(4) content,and the larger the N_(2) injection pressure the more significant the reduction effect.Meanwhile,N_(2)-ECGE can significantly increase the CH_(4) extraction and output rate,and the increase of N_(2) pressure further improves the extraction efficiency.In addition,the pressure of nitrogen injection has a remarkable effect on coal seam permeability,high pressure of nitrogen injection can increase the permeability in the time of no disturbance,but the rate of permeability decreases more quickly after disturbed.The effect of strain due to adsorption desorption on coal seam permeability dominates.Despite model construction limitations,this research offers essential theoretical and practical direction for N_(2) injection to enhance the permeability evolution law of coal seam gas extraction process.
基金supported by the National Natural Science Foundation of China (Nos.41902290,42007276,41972297)Program of Hundred Promising Innovative Talents in Hebei provincial education office (No.SLRC2019027)Natural Science Foundation of Hebei Province (Nos.D2020202002,D2021202001)。
文摘Rockfalls in reservoirs are prone to induce surges, posing a severe threat to passing vessels and facilities. A scheme combined Single-phase freesurface method(SPF), momentum exchange method(MEM), and Lattice Boltzmann method(LBM) is proposed to predict the impact of rockfall-induced surges. First, the LBM-SPF model is used to simulate the motion of the free surface, and the MEM model is used to calculate the hydrodynamic force acting on rock mass. To address the incompatibility issue arising from the coupling of LBM-SPF model and MEM model, a correction scheme inside the solid is induced. The simulation results of the single particle and double particle sedimentation in cavity show the feasibility and accuracy of the method designed in this paper. Moreover, the validation experiments of Scott Russel’s wave generator show that the proposed scheme can simulate wave profile stably. The simulation results emphasize that the waves induced by rockfalls have a significant impact on the safe operation of the Laxiwa dam and the passing vessels in the reservoir.
基金financially supported by the National Natural Science Foundation of China (No.52074137)Yunnan Fundamental Research Projects (No.202201AT070151)+1 种基金Yunnan Major Scientific and Technological Projects (No.202202AG050014)Yunnan Innovation Team (No.202105AE160023)。
文摘Paste flow patterns and microscopic particle structures were studied in a pressurized environment generated by a pulse pump.Complex loop-pipe experiments and fluid-solid coupling-based simulations were conducted.The scanning electron microscopy technique was also applied.Results revealed that flow resistance is closely related to pipeline curvature and angle in a complex pipe network.The vertical downward-straight pipe-inclined downward combination was adopted to effectively reduce the loss in resistance along with reducing the number of bends or increasing the radius of bend curvature.The maximum velocity ratio and velocity offset values could quantitatively characterize the influences of different pipeline layouts on the resistance.The correlation reached 96%.Particle distribution and interparticle forces affected flow resistance.Uniform particle states and weak interparticle forces were conducive to steady transport.Pulse pump pressure led to high flow resistance.It could improve pipe flow stability by increasing flow uniformity and particle motion stability.These results can contribute to safe and efficient paste filling.
