Many fishes use undulatory fin to propel themselves in the underwater environment. These locomotor mechanisms have a popular interest to many researchers. In the present study, we perform a three-dimensional unsteady ...Many fishes use undulatory fin to propel themselves in the underwater environment. These locomotor mechanisms have a popular interest to many researchers. In the present study, we perform a three-dimensional unsteady computation of an undulatory mechanical fin that is driven by Shape Memory Alloy （SMA）. The objective of the computation is to investigate the fluid dynamics of force production associated with the undulatory mechanical fin. An unstructured, grid-based, unsteady Navier-Stokes solver with automatic adaptive remeshing is used to compute the unsteady flow around the fin through five complete cycles. The pressure distribution on fin surface is computed and integrated to provide fin forces which are decomposed into lift and thrust. The velocity field is also computed throughout the swimming cycle. Finally, a comparison is conducted to reveal the dynamics of force generation according to the kinematic parameters of the undulatory fin （amplitude, frequency and wavelength）.展开更多
Electrochemical test technology and surface analysis method were employed to investigate the pitting corrosion of Cu-Zn-AI shape memory alloy in simulated uterine fluid. The results showed that the breakage of the bre...Electrochemical test technology and surface analysis method were employed to investigate the pitting corrosion of Cu-Zn-AI shape memory alloy in simulated uterine fluid. The results showed that the breakage of the breaking-renovating equilibrium of surface layers resulted in the pitting corrosion of Cu-Zn-AI shape memory alloy in simulated uterine fluid. The development of pitting corrosion was controlled by dissolution of surface layers. The critical pitting corrosion potential was 1.70 VSCE. The kinetics equation for the development of pitting corrosion for Cu-Zn-AI shape memory alloy in simulated uterine fluid was io=465.68 t-0.5+1.5. Pitting appearances of pits could be two types: tortoise-shell, and anomaly abscess. Cl- ion facilitated the pitting corrosion of Cu-Zn-AI shape memory alloy by competing adsorption and concentrating on alloy surface at high positive potential.展开更多
A variable-fidelity method can remarkably improve the efficiency of a design optimization based on a high-fidelity and expensive numerical simulation,with assistance of lower-fidelity and cheaper simulation(s).However...A variable-fidelity method can remarkably improve the efficiency of a design optimization based on a high-fidelity and expensive numerical simulation,with assistance of lower-fidelity and cheaper simulation(s).However,most existing works only incorporate‘‘two"levels of fidelity,and thus efficiency improvement is very limited.In order to reduce the number of high-fidelity simulations as many as possible,there is a strong need to extend it to three or more fidelities.This article proposes a novel variable-fidelity optimization approach with application to aerodynamic design.Its key ingredient is the theory and algorithm of a Multi-level Hierarchical Kriging(MHK),which is referred to as a surrogate model that can incorporate simulation data with arbitrary levels of fidelity.The high-fidelity model is defined as a CFD simulation using a fine grid and the lower-fidelity models are defined as the same CFD model but with coarser grids,which are determined through a grid convergence study.First,sampling shapes are selected for each level of fidelity via technique of Design of Experiments(DoE).Then,CFD simulations are conducted and the output data of varying fidelity is used to build initial MHK models for objective(e.g.C_D)and constraint(e.g.C_L,C_m)functions.Next,new samples are selected through infillsampling criteria and the surrogate models are repetitively updated until a global optimum is found.The proposed method is validated by analytical test cases and applied to aerodynamic shape optimization of a NACA0012 airfoil and an ONERA M6 wing in transonic flows.The results confirm that the proposed method can significantly improve the optimization efficiency and apparently outperforms the existing single-fidelity or two-level-fidelity method.展开更多
A three-dimensional computational fluid dynamics （CFD） model was developed to simulate a 150-t top-blown converter. The ef-fect of different lance heights on the cavity shape was investigated using the volume of flu...A three-dimensional computational fluid dynamics （CFD） model was developed to simulate a 150-t top-blown converter. The ef-fect of different lance heights on the cavity shape was investigated using the volume of fluid （VOF） method. Numerical simulation results can reflect the actual molten bath surface waves impinged by the supersonic oxygen jets. With increasing lance height, the cavity depth de-creases, and the cavity area, varying like a parabola, increases and then decreases. The cavity area maximizes at the lance height of 1.3 m. Under the three different lance heights simulated in this study, all of the largest impact velocities at the molten bath surface are between 50 m/s and 100 m/s.展开更多
A new controllable laser beam shaping technique is demonstrated, where a magnetic fluid-based liquid deformable mirror is proposed to redistribute the laser phase profile and thus change the propagation property of th...A new controllable laser beam shaping technique is demonstrated, where a magnetic fluid-based liquid deformable mirror is proposed to redistribute the laser phase profile and thus change the propagation property of the beam. The mirror is driven by an inner miniature actuator array along with a large outer actuator. The inner actuator array is used for deforming the magnetic fluid surface, while the outer actuator is used to linearize the fluid surface response and amplify the magnitude of the deflection. In comparison to other laser beam shaping techniques, this technique offers the advantages such as simplicity, low cost, large shape deformation, and high adaptability. Based on a fabricated prototype of the liquid deformable mirror, an experimental AO system was set up to produce a desired conical surface shape that shaped the incident beam into a Bessel beam. The experimental results show the effectiveness of the proposed technique for laser beam shaping.展开更多
This comprehensive review focuses on the performance of solar dryers, with a specific emphasis on their structural shape and orientation. Researchers have extensively examined these design parameters, often employing ...This comprehensive review focuses on the performance of solar dryers, with a specific emphasis on their structural shape and orientation. Researchers have extensively examined these design parameters, often employing Computational Fluid Dynamics (CFD) to assess thermal attributes and predict temperature distribution, airflow patterns, and temperature profiles within the structures. Geographical location significantly influences solar dryer shape preferences, with the parabolic shape finding favor in tropical regions for its superior solar radiation capture and storm resistance, while even-span and Quonset shapes are popular elsewhere. Solar dryer orientation is another crucial factor, with east-west alignment consistently proving optimal due to its ability to maximize year-round solar radiation absorption and, consequently, enhance drying efficiency. Economic considerations, however, fall beyond the scope of this review, which predominantly focuses on thermal aspects. This investigation reveals diverse global preferences for solar dryer shapes and orientation, highlighting the necessity of considering geographical factors in design choices. While CFD and shape/orientation dynamics have provided valuable insights, there remains room for future research to expand into transient state simulations under various conditions, contributing to a more comprehensive understanding of solar dryer performance. Such insights promise to promote sustainable and efficient drying processes, benefitting agricultural and drying applications across the globe.展开更多
The thermal performance enhancement of the hydronic radiant floor heating system by tube shape refinements is investigated in this paper.Both analytical and detailed numerical modelings are carried out to predict the ...The thermal performance enhancement of the hydronic radiant floor heating system by tube shape refinements is investigated in this paper.Both analytical and detailed numerical modelings are carried out to predict the performance of the radiant system.While the simple analytical model briefly investigates the possibility of the effect of the tube shape improvement with the parametric analysis,the commercial computational fluid dynamics(CFD) code(Ansys/CFX) is used to perform the detailed 3D analysis under different tube shape conditions.The fin thickness,the number of fins,and the tube thermal conductivity turn out to have significant effects on the radiant system performance.The potential energy saving impacts of the tube shape refinements are also discussed.The tube shape improvement turns out to increase the floor surface temperature and to decrease the hot water temperature drop across the system,resulting in heating energy savings.展开更多
Describing matrix–fracture interaction is one of the most important factors for modeling natural fractured reservoirs.A common approach for simulation of naturally fractured reservoirs is dual-porosity modeling where...Describing matrix–fracture interaction is one of the most important factors for modeling natural fractured reservoirs.A common approach for simulation of naturally fractured reservoirs is dual-porosity modeling where the degree of communication between the low-permeability medium(matrix)and high-permeability medium(fracture)is usually determined by a transfer function.Most of the proposed matrix–fracture functions depend on the geometry of the matrix and fractures that are lumped to a factor called shape factor.Unfortunately,there is no unique solution for calculating the shape factor even for symmetric cases.Conducting fine-scale modeling is a tool for calculating the shape factor and validating the current solutions in the literature.In this study,the shape factor is calculated based on the numerical simulation of fine-grid simulations for single-phase flow using finite element method.To the best of the author’s knowledge,this is the first study to calculate the shape factors for multidimensional irregular bodies in a systematic approach.Several models were used,and shape factors were calculated for both transient and pseudo-steady-state(PSS)cases,although in some cases they were not clarified and assumptions were not clear.The boundary condition dependency of the shape factor was also investigated,and the obtained results were compared with the results of other studies.Results show that some of the most popular formulas cannot capture the exact physics of matrix–fracture interaction.The obtained results also show that both PSS and transient approaches for describing matrix–fracture transfer lead to constant shape factors that are not unique and depend on the fracture pressure(boundary condition)and how it changes with time.展开更多
This paper presents an analytical solution to the unsteady flow of the second-order non-Newtonian fluids by the use of intergral transformation method. Based on the numerical results, the effect of non-Newtonian coeff...This paper presents an analytical solution to the unsteady flow of the second-order non-Newtonian fluids by the use of intergral transformation method. Based on the numerical results, the effect of non-Newtonian coefficient Hc and other parameters on the flow are analysed. It is shown that the annular flow has a shorter characteristic time than the general pipe flow while the correspondent velocity, average velocity have a ... nailer value for a given Hc. Else, when radii ratio keeps unchanged, the shear stress of inner wall of annular flow will change with the inner radius -compared with the general pipe flow and is always smaller than that of the outer wall.展开更多
Objective: To report a case series of dome-shaped macula (DSM) and serous retinal detachment (SRD). Methods: A retrospective and observational case series study was performed at two centers of ophthalmology in Rosario...Objective: To report a case series of dome-shaped macula (DSM) and serous retinal detachment (SRD). Methods: A retrospective and observational case series study was performed at two centers of ophthalmology in Rosario-Argentina from January 2016 to December 2017. Eight eyes of 5 patients diagnosed with dome-shaped macula with subfoveal hyporeflective zone seen in optical coherence tomography (OCT) were included. Best-corrected visual acuity (BCVA), OCT, fluorescein angiography (FA), differential diagnoses, clinical course and different treatments were reviewed. Results: Baseline visual acuity ranged from 20/25 to 20/200. OCT revealed that the retinal choroidal macular complex had a convex shape and exhibited foveal neurosensory retinal detachment in all cases. FA showed mild diffuse hyperfluorescence due to changes in the retinal pigment epithelium (RPE). No sign of leakage was observed. Different treatments were used, including intravitreal antiangiogenic drugs, oral spironolactone, melatonin and observation. Follow-up time was between 6 and 18 months. BCVA and OCT findings remained unchanged after different options of treatment. Conclusions: DSM is an unusual entity, which can be confused with other maculopathies that cause neurosensory retinal detachment and do not respond to different types of treatment. Hence, in our opinion, observation is a reasonable approach for this disorder.展开更多
文摘Many fishes use undulatory fin to propel themselves in the underwater environment. These locomotor mechanisms have a popular interest to many researchers. In the present study, we perform a three-dimensional unsteady computation of an undulatory mechanical fin that is driven by Shape Memory Alloy （SMA）. The objective of the computation is to investigate the fluid dynamics of force production associated with the undulatory mechanical fin. An unstructured, grid-based, unsteady Navier-Stokes solver with automatic adaptive remeshing is used to compute the unsteady flow around the fin through five complete cycles. The pressure distribution on fin surface is computed and integrated to provide fin forces which are decomposed into lift and thrust. The velocity field is also computed throughout the swimming cycle. Finally, a comparison is conducted to reveal the dynamics of force generation according to the kinematic parameters of the undulatory fin （amplitude, frequency and wavelength）.
文摘Electrochemical test technology and surface analysis method were employed to investigate the pitting corrosion of Cu-Zn-AI shape memory alloy in simulated uterine fluid. The results showed that the breakage of the breaking-renovating equilibrium of surface layers resulted in the pitting corrosion of Cu-Zn-AI shape memory alloy in simulated uterine fluid. The development of pitting corrosion was controlled by dissolution of surface layers. The critical pitting corrosion potential was 1.70 VSCE. The kinetics equation for the development of pitting corrosion for Cu-Zn-AI shape memory alloy in simulated uterine fluid was io=465.68 t-0.5+1.5. Pitting appearances of pits could be two types: tortoise-shell, and anomaly abscess. Cl- ion facilitated the pitting corrosion of Cu-Zn-AI shape memory alloy by competing adsorption and concentrating on alloy surface at high positive potential.
基金sponsored by the National Natural Science Foundation of China(Nos.11772261 and 11972305)Aeronautical Science Foundation of China(No.2016ZA53011)Foundation of National Key Laboratory(No.JCKYS2019607005).
文摘A variable-fidelity method can remarkably improve the efficiency of a design optimization based on a high-fidelity and expensive numerical simulation,with assistance of lower-fidelity and cheaper simulation(s).However,most existing works only incorporate‘‘two"levels of fidelity,and thus efficiency improvement is very limited.In order to reduce the number of high-fidelity simulations as many as possible,there is a strong need to extend it to three or more fidelities.This article proposes a novel variable-fidelity optimization approach with application to aerodynamic design.Its key ingredient is the theory and algorithm of a Multi-level Hierarchical Kriging(MHK),which is referred to as a surrogate model that can incorporate simulation data with arbitrary levels of fidelity.The high-fidelity model is defined as a CFD simulation using a fine grid and the lower-fidelity models are defined as the same CFD model but with coarser grids,which are determined through a grid convergence study.First,sampling shapes are selected for each level of fidelity via technique of Design of Experiments(DoE).Then,CFD simulations are conducted and the output data of varying fidelity is used to build initial MHK models for objective(e.g.C_D)and constraint(e.g.C_L,C_m)functions.Next,new samples are selected through infillsampling criteria and the surrogate models are repetitively updated until a global optimum is found.The proposed method is validated by analytical test cases and applied to aerodynamic shape optimization of a NACA0012 airfoil and an ONERA M6 wing in transonic flows.The results confirm that the proposed method can significantly improve the optimization efficiency and apparently outperforms the existing single-fidelity or two-level-fidelity method.
文摘A three-dimensional computational fluid dynamics （CFD） model was developed to simulate a 150-t top-blown converter. The ef-fect of different lance heights on the cavity shape was investigated using the volume of fluid （VOF） method. Numerical simulation results can reflect the actual molten bath surface waves impinged by the supersonic oxygen jets. With increasing lance height, the cavity depth de-creases, and the cavity area, varying like a parabola, increases and then decreases. The cavity area maximizes at the lance height of 1.3 m. Under the three different lance heights simulated in this study, all of the largest impact velocities at the molten bath surface are between 50 m/s and 100 m/s.
基金Project supported by the National Natural Science Foundation of China(Grant No.51675321)Shanghai Municipal Natural Science Foundation,China(Grant No.15ZR1415800)the Innovation Program of Shanghai Municipal Education Commission,China(Grant No.14ZZ092)
文摘A new controllable laser beam shaping technique is demonstrated, where a magnetic fluid-based liquid deformable mirror is proposed to redistribute the laser phase profile and thus change the propagation property of the beam. The mirror is driven by an inner miniature actuator array along with a large outer actuator. The inner actuator array is used for deforming the magnetic fluid surface, while the outer actuator is used to linearize the fluid surface response and amplify the magnitude of the deflection. In comparison to other laser beam shaping techniques, this technique offers the advantages such as simplicity, low cost, large shape deformation, and high adaptability. Based on a fabricated prototype of the liquid deformable mirror, an experimental AO system was set up to produce a desired conical surface shape that shaped the incident beam into a Bessel beam. The experimental results show the effectiveness of the proposed technique for laser beam shaping.
文摘This comprehensive review focuses on the performance of solar dryers, with a specific emphasis on their structural shape and orientation. Researchers have extensively examined these design parameters, often employing Computational Fluid Dynamics (CFD) to assess thermal attributes and predict temperature distribution, airflow patterns, and temperature profiles within the structures. Geographical location significantly influences solar dryer shape preferences, with the parabolic shape finding favor in tropical regions for its superior solar radiation capture and storm resistance, while even-span and Quonset shapes are popular elsewhere. Solar dryer orientation is another crucial factor, with east-west alignment consistently proving optimal due to its ability to maximize year-round solar radiation absorption and, consequently, enhance drying efficiency. Economic considerations, however, fall beyond the scope of this review, which predominantly focuses on thermal aspects. This investigation reveals diverse global preferences for solar dryer shapes and orientation, highlighting the necessity of considering geographical factors in design choices. While CFD and shape/orientation dynamics have provided valuable insights, there remains room for future research to expand into transient state simulations under various conditions, contributing to a more comprehensive understanding of solar dryer performance. Such insights promise to promote sustainable and efficient drying processes, benefitting agricultural and drying applications across the globe.
文摘The thermal performance enhancement of the hydronic radiant floor heating system by tube shape refinements is investigated in this paper.Both analytical and detailed numerical modelings are carried out to predict the performance of the radiant system.While the simple analytical model briefly investigates the possibility of the effect of the tube shape improvement with the parametric analysis,the commercial computational fluid dynamics(CFD) code(Ansys/CFX) is used to perform the detailed 3D analysis under different tube shape conditions.The fin thickness,the number of fins,and the tube thermal conductivity turn out to have significant effects on the radiant system performance.The potential energy saving impacts of the tube shape refinements are also discussed.The tube shape improvement turns out to increase the floor surface temperature and to decrease the hot water temperature drop across the system,resulting in heating energy savings.
文摘Describing matrix–fracture interaction is one of the most important factors for modeling natural fractured reservoirs.A common approach for simulation of naturally fractured reservoirs is dual-porosity modeling where the degree of communication between the low-permeability medium(matrix)and high-permeability medium(fracture)is usually determined by a transfer function.Most of the proposed matrix–fracture functions depend on the geometry of the matrix and fractures that are lumped to a factor called shape factor.Unfortunately,there is no unique solution for calculating the shape factor even for symmetric cases.Conducting fine-scale modeling is a tool for calculating the shape factor and validating the current solutions in the literature.In this study,the shape factor is calculated based on the numerical simulation of fine-grid simulations for single-phase flow using finite element method.To the best of the author’s knowledge,this is the first study to calculate the shape factors for multidimensional irregular bodies in a systematic approach.Several models were used,and shape factors were calculated for both transient and pseudo-steady-state(PSS)cases,although in some cases they were not clarified and assumptions were not clear.The boundary condition dependency of the shape factor was also investigated,and the obtained results were compared with the results of other studies.Results show that some of the most popular formulas cannot capture the exact physics of matrix–fracture interaction.The obtained results also show that both PSS and transient approaches for describing matrix–fracture transfer lead to constant shape factors that are not unique and depend on the fracture pressure(boundary condition)and how it changes with time.
文摘This paper presents an analytical solution to the unsteady flow of the second-order non-Newtonian fluids by the use of intergral transformation method. Based on the numerical results, the effect of non-Newtonian coefficient Hc and other parameters on the flow are analysed. It is shown that the annular flow has a shorter characteristic time than the general pipe flow while the correspondent velocity, average velocity have a ... nailer value for a given Hc. Else, when radii ratio keeps unchanged, the shear stress of inner wall of annular flow will change with the inner radius -compared with the general pipe flow and is always smaller than that of the outer wall.
文摘Objective: To report a case series of dome-shaped macula (DSM) and serous retinal detachment (SRD). Methods: A retrospective and observational case series study was performed at two centers of ophthalmology in Rosario-Argentina from January 2016 to December 2017. Eight eyes of 5 patients diagnosed with dome-shaped macula with subfoveal hyporeflective zone seen in optical coherence tomography (OCT) were included. Best-corrected visual acuity (BCVA), OCT, fluorescein angiography (FA), differential diagnoses, clinical course and different treatments were reviewed. Results: Baseline visual acuity ranged from 20/25 to 20/200. OCT revealed that the retinal choroidal macular complex had a convex shape and exhibited foveal neurosensory retinal detachment in all cases. FA showed mild diffuse hyperfluorescence due to changes in the retinal pigment epithelium (RPE). No sign of leakage was observed. Different treatments were used, including intravitreal antiangiogenic drugs, oral spironolactone, melatonin and observation. Follow-up time was between 6 and 18 months. BCVA and OCT findings remained unchanged after different options of treatment. Conclusions: DSM is an unusual entity, which can be confused with other maculopathies that cause neurosensory retinal detachment and do not respond to different types of treatment. Hence, in our opinion, observation is a reasonable approach for this disorder.
