Because of the large coefficient of thermal expansion (CTE) (23 ppm K^(–1)), aluminum faces challenges in meeting the demands of high dimensional stability in precision instruments, microelectronics, and aerospace. F...Because of the large coefficient of thermal expansion (CTE) (23 ppm K^(–1)), aluminum faces challenges in meeting the demands of high dimensional stability in precision instruments, microelectronics, and aerospace. Filling negative thermal expansion (NTE) particles into aluminum can create composites with either zero or low CTEs. However, the resulting composites usually have poor thermal conductivity due to their monolithic configuration, i.e., the NTE particles are filled randomly. Thus, heat sinks should be equipped to assist their usage (e.g., in thermal management). This in turn causes strong thermal stress in the packaging system owing to the high contrast in the CTEs between those monolithic composites and heat sinks typically made of copper or aluminum. Here, we propose a gradient configuration for low-CTE aluminum composite, inspired by the bamboo structure. The gradient distribution of NTE particles (Zn_(0.5)Sn_(0.3)Mn_(0.2)NMn_(3), ZSM) was obtained by laying up several layers of ZSM/Al with the ZSM fraction ranging from 0 to 28 vol.%. In the gradient composite, the CTE near room temperature varies from 3.4 pm K^(–1) on one side to 21 ppm K^(–1) on the other side. Such a gradient CTE distribution would facilitate the low-thermal-stress designs and thus help stabilize the dimension of a precision system. Furthermore, this composite has a high thermal conductivity of 130 W m^(–1) K^(–1) and strong toughness when the flexural loading is applied on the 28 vol.% ZSM/Al side. Our research provides a novel approach to designing metallic matrix composites with unprecedented performance.展开更多
Al2O3f/Al2O3 ceramic matrix composites(CMC)are promising candidate materials of blades and combustor liners of future gas turbines in light of their higher temperature capability,higher environmental stability and oxi...Al2O3f/Al2O3 ceramic matrix composites(CMC)are promising candidate materials of blades and combustor liners of future gas turbines in light of their higher temperature capability,higher environmental stability and oxidizing-free capacity[1–3].Nevertheless,grain growth,sintering and creep deformation at high operation temperatures are still serious problems for Al2O3f/Al2O3 ceramic matrix composites,which can lead to a reduction in the strength and damage tolerance[2].Moreover,Al2O3 can be corroded by the high temperature water vapor in combustion environments and yields volatile products,such as Al(OH)3[4].Consequently,environmental barrier coatings(EBCs)are necessary for Al2O3f/Al2O3 ceramic matrix composites,which can protect Al2O3f/Al2O3 CMC from high temperature and flowing combustion gas corrosion and thus increase the high temperature capability and the service life of components.展开更多
In this paper, a corrected particle method based on the smoothed particle hydrodynamics (SPH) method with high-order Taylor expansion (CSPH-HT) for solving the viscoelastic flow is proposed and investigated. The valid...In this paper, a corrected particle method based on the smoothed particle hydrodynamics (SPH) method with high-order Taylor expansion (CSPH-HT) for solving the viscoelastic flow is proposed and investigated. The validity and merits of the CSPH-HT method are first tested by solving the nonlinear high order Kuramoto-Sivishinsky equation and simulating the drop stretching, respectively. Then the flow behaviors behind two stationary tangential cylinders of polymer melt, which have been received little attention, are investigated by the CSPH-HT method. Finally, the CSPH-HT method is extended to the simulation of the filling process of the viscoelastic fluid. The numerical results show that the CSPH-HT method possesses higher accuracy and stability than other corrected SPH methods and is more reliable than other corrected SPH methods.展开更多
Low thermal expansion composites are difficult to obtain by using Al with larger positive thermal expansion coefficient（TEC） and the materials with smaller negative TECs. In this investigation, Y2Mo3O12 with larger ...Low thermal expansion composites are difficult to obtain by using Al with larger positive thermal expansion coefficient（TEC） and the materials with smaller negative TECs. In this investigation, Y2Mo3O12 with larger negative TEC is used to combine with Al to obtain a low thermal expansion composite with high conductivity. The TEC of Al is reduced by 19%for a ratio Al：Y2Mo3O12 of 0.3118. When the mass ratio of Al：Y2Mo3O12 increases to 2.0000, the conductivity of the composite increases so much that a transformation from capacitance to pure resistance appears. The results suggest that Y2Mo3O12 plays a dominant role in the composite for low content of Al（presenting isolate particles）, while the content of Al increases enough to contact each other, the composite presents mainly the property of Al. For the effect of high content Al, it is considered that Al is squeezed out of the cermets during the uniaxial pressure process to form a thin layer on the surface.展开更多
Midpalatal corticotomy-assisted rapid maxillary expansion(MCRME)is a minimally invasive treatment of maxillary transverse deficiency(MTD)in young adults.However,the effect of MCRME on respiratory function still needs ...Midpalatal corticotomy-assisted rapid maxillary expansion(MCRME)is a minimally invasive treatment of maxillary transverse deficiency(MTD)in young adults.However,the effect of MCRME on respiratory function still needs to be determined.In this study,we evaluated the changes in maxillary morphology and the upper airway following MCRME using computational fluid dynamics(CFD).Twenty patients with MTD(8 males,12 females;mean age 20.55 years)had cone-beam computed tomography(CBCT)images taken before and after MCRME.The CBCT data were used to construct a threedimensional(3 D)upper airway model.The upper airway flow characteristics were simulated using CFD,and measurements were made based on the CBCT images and CFD.The results showed that the widths of the palatal bone and nasal cavity,and the intermolar width were increased significantly after MCRME.The volume of the nasal cavity and nasopharynx increased significantly,while there were no obvious changes in the volumes of the oropharynx and hypopharynx.CFD simulation of the upper airway showed that the pressure drop and maximum velocity of the upper airway decreased significantly after treatment.Our results suggest that in these young adults with MTD,increasing the maxillary width,upper airway volume,and quantity of airflow by MCRME substantially improved upper airway ventilation.展开更多
Low thermal expansion materials are mostly ceramics with low conductive property, which limits their applications in electronic devices. The poor conductive property of ceramic ZrV_2 O_7 could be improved by bi-substi...Low thermal expansion materials are mostly ceramics with low conductive property, which limits their applications in electronic devices. The poor conductive property of ceramic ZrV_2 O_7 could be improved by bi-substitution of Fe and Mo for Zr and V, accompanied with low thermal expansion. Zr_(0.1) Fe_(0.9) V_(1.1 )Mo_(0.9 )O_7 has electrical conductivity of 8.2× 10^(-5) S/cm and 9.41× 10^(-4) S/cm at 291 K and 623 K, respectively. From 291 K to 413 K, thermal excitation leads to the increase of carrier concentration, which causes the rapid decrease of resistance. At 413–533 K, the conductivity is unchanged due to high scattering probability and a slowing increase of carrier concentration. The conductivity rapidly increases again from533 K to 623 K due to the intrinsic thermal excitation. The thermal expansion coefficient of Zr_(0.1) Fe_(0.9) V_(1.1 )Mo_(0.9 )O_7 is as low as 0.72× 10^(-6 )K^(-1) at 140–700 K from the dilatometer measurement. These properties suggest that Zr_(0.1) Fe_(0.9) V_(1.1 )Mo_(0.9 )O_7 has attractive application in electronic components.展开更多
The simulation results on viscoelastic fluid flows in sudden expansion geometry with different expansion ratios are presented. Oldroyd-B, linear Phan-Thien-Tanner （L-PTT） and Finitely Extensible Nonlinear Elastic （...The simulation results on viscoelastic fluid flows in sudden expansion geometry with different expansion ratios are presented. Oldroyd-B, linear Phan-Thien-Tanner （L-PTT） and Finitely Extensible Nonlinear Elastic （FENE-P） based constitutive equations were applied in two-dimensional Cartesian coordinates. The governing equations in transient and fully developed regions were solved using open source software called OpenFOAM. The flow patterns, including velocity profiles, shear stresses and first normal stress differences in some horizontal and vertical sections are illustrated. In addition, effects of the fluid type, flow dynamics and expansion ratio on the flow and vortex patterns in transient and fully developed regions are presented and discussed. The presented results show that existences of vortices cause the inverse velocity and negative stresses in expansion regions of the channel which increase with increment of expansion ratio and Weissenberg number （We）. Furthermore, some dead spaces can be observed at channel expansion regions close to the wall which are also increased. The results also show that at low We numbers all fluids show close behavior while at high We numbers the FENE-P fluid behavior shows high divergence from that of the two other fluids.展开更多
Ln0.6Sr0.4Co0.2Fe0.2O3 （Ln=La, Pr, Nd, Sm） perovskite-type complex oxides were synthesized using a glycine-nitrate process, and the structure, electrical conducting and thermal expansion properties of the resulting ...Ln0.6Sr0.4Co0.2Fe0.2O3 （Ln=La, Pr, Nd, Sm） perovskite-type complex oxides were synthesized using a glycine-nitrate process, and the structure, electrical conducting and thermal expansion properties of the resulting ceramics were examined with regard to the nature of the lanthanide cations. The results indicated that the La, Pr and Nd specimens had a rhombohedral symmetry, while an orthorhombic structure was determined for the Sm specimen. The pseudo-cubic lattice constant decreased with smaller lanthanide cations. It was found that the electrical conducting properties declined with decreasing lanthanide cation size. Fortunately, all the compositions remained rather high electrical conductivities exceeding 650 Ω ^-1m·cm^-1 in the intermediate temperature range （600-800 ℃）. An appreciable thermal expansion increase at high temperatures was detected for all the compositions. Decreasing the size of the lanthanide cations resulted in an increase of thermal expansion. With respect to the high electrical conductivities, the Ln0.6Sr0.4Co0.8Fe0.2O3 oxides are considered to be acceptable as mixed conducting component in composite cathode designs together with doped ceria electrolytes.展开更多
Among the several methods used to solve the Navier-Stokes equations Hierarchical Expansion Method has demonstrated satisfactory results. This work aimed to apply the expansion of the variables in hierarchical function...Among the several methods used to solve the Navier-Stokes equations Hierarchical Expansion Method has demonstrated satisfactory results. This work aimed to apply the expansion of the variables in hierarchical functions for the solution of the Navier-Stokes equations for incompressible fluids in two dimensions in laminar flow. This method is based on the finite element method. The expansion functions in this study were based on Legendre polynomials, adjusted in the rectangular elements in such a way that corner, side and area functions were defined. The order of the expansion functions associated with the sides and with the area of the elements is adjusted to the necessary or desired degree. This method is denominated by Hierarchical Expansion Method. In order to validate the proposed numeric method three well-known problems of the literature in two dimensions were analyzed;however, for this paper only one problem was presented. The results demonstrated that method was able to provide precise results. From the results obtained in this paper it is possible to conclude that the hierarchical expansion method can be effective for the solution of fluid dynamic problems that involve incompressible fluids.展开更多
In this paper,we study the Joule–Thomson expansion for RN-AdS black holes immersed in perfect fluid dark matter.As perfect fluid dark matter is one of the dark matter candidates,we are interested in how it influences...In this paper,we study the Joule–Thomson expansion for RN-AdS black holes immersed in perfect fluid dark matter.As perfect fluid dark matter is one of the dark matter candidates,we are interested in how it influences the thermodynamic properties of black holes.Firstly,the negative cosmological constant could be interpreted as thermodynamic pressure and its conjugate quantity as the thermodynamic volume,which give us more physical insights into the black hole.Moreover,we derive the thermodynamic definitions and study the critical behaviour of the black hole.Secondly,the explicit expression of Joule–Thomson coefficient is obtained from the basic formulas of the pressure,the volume,the entropy and the temperature.Then,we obtain the inversion curves in terms of charge Q and parameterλ.Furthermore,we analyse the isenthalpic curve in T–P graph with the cooling–heating region determined by the inversion curve.At last,we derive the ratio of minimum inversion temperature to critical temperature and compare the result with that in the RN-AdS case.展开更多
The effect of an inclined magnetic field in the peristaltic flow of a Jeffrey fluid with variable thermal conductivity is discussed. The temperature dependent thermal conductivity of fluid in an asymmetric channel is ...The effect of an inclined magnetic field in the peristaltic flow of a Jeffrey fluid with variable thermal conductivity is discussed. The temperature dependent thermal conductivity of fluid in an asymmetric channel is taken into account. A dimensionless nonlinear system subject to a long wavelength and a low Reynolds number is solved. The explicit expressions of the stream function, the axial velocity, the pressure gradient, and the temperature are obtained. The effects of all physical parameters on peristaltic transport and heat transfer characteristics are observed from graphical illustrations. The behaviors of θ∈ [0, π/2] and θ∈ [π/2, π] on fluid flow and heat transfer are found to be opposite. Further, the size of trapped bolus is greater for the case of the inclined magnetic field （θ≠ π/2） than that for the case of the transverse magnetic field （θ = π/2）. The heat transfer coefficient decreases when the constant thermal conductivity （Newtonian） fluid is changed to the variable thermal conductivity （Jeffrey） fluid.展开更多
Hydrostatic cyclic expansion extrusion(HCEE) process at elevated temperatures is proposed as a method for processing less deformable materials such as magnesium and for producing long ultrafine-grained rods. In the HC...Hydrostatic cyclic expansion extrusion(HCEE) process at elevated temperatures is proposed as a method for processing less deformable materials such as magnesium and for producing long ultrafine-grained rods. In the HCEE process at elevated temperatures, high-pressure molten linear low-density polyethylene(LLDPE) was used as a fluid to eliminate frictional forces. To study the capability of the process,AM60 magnesium rods were processed and the properties were investigated. The mechanical properties were found to improve significantly after the HCEE process. The yield and ultimate strengths increased from initial values of 138 and 221 MPa to 212 and 317 MPa, respectively.Moreover, the elongation was enhanced due to the refined grains and the existence of high hydrostatic pressure. Furthermore, the microhardness was increased from HV 55.0 to HV 72.5. The microstructural analysis revealed that ultrafine-grained structure could be produced by the HCEE process. Moreover, the size of the particles decreased, and these particles thoroughly scattered between the grains. Finite element analysis showed that the HCEE was independent of the length of the sample, which makes the process suitable for industrial applications.展开更多
This article addresses the three-dimensional stretched flow of the Jeffrey fluid with thermal radiation. The thermal conductivity of the fluid varies linearly with respect to temperature. Computations are performed fo...This article addresses the three-dimensional stretched flow of the Jeffrey fluid with thermal radiation. The thermal conductivity of the fluid varies linearly with respect to temperature. Computations are performed for the velocity and temperature fields. Graphs for the velocity and temperature are plotted to examine the behaviors with different parameters. Numerical values of the local Nusselt number are presented and discussed. The present results are compared with the existing limiting solutions, showing good agreement with each other.展开更多
Orientation control of anisotropic one-dimensional(1D)and two-dimensional(2D)materials in solutions is of great importance in many fields ranging from structural materials design,the thermal management,to energy stora...Orientation control of anisotropic one-dimensional(1D)and two-dimensional(2D)materials in solutions is of great importance in many fields ranging from structural materials design,the thermal management,to energy storage.Achieving fine control of vertical alignment of anisotropic fillers(such as graphene,boron nitride(BN),and carbon fiber)remains challenging.This work presents a universal and scalable method for constructing vertically aligned structures of anisotropic fillers in composites assisted by the expansion flow(using2D BN platelets as a proof-of-concept).BN platelets in the silicone gel strip are oriented in a curved shape that includes vertical alignment in the central area and horizontal alignment close to strip surfaces.Due to the vertical orientation of BN in the central area of strips,a throughplane thermal conductivity as high as 5.65 W m^(-1) K^(-1) was obtained,which can be further improved to 6.54 W m^(-1) K^(-1) by combining BN and pitch-based carbon fibers.The expansion-flow-assisted alignment can be extended to the manufacture of a variety of polymer composites filled with 1D and 2D materials,which can find wide applications in batteries,electronics,and energy storage devices.展开更多
A sophisticated theoretical and mathematical model is proposed.It is verified that this model can estimate and monitor the detailed behavior for the steady Carreau fluid flow past a nonlinear stretching surface and th...A sophisticated theoretical and mathematical model is proposed.It is verified that this model can estimate and monitor the detailed behavior for the steady Carreau fluid flow past a nonlinear stretching surface and the predicted phenomena due to the presence of heat flux,thermal radiation,and viscous dissipation.Despite the fact that some properties of the fluid do not depend on the temperature,the fluid thermal conductivity is assumed to depend on the temperature.Based on accelerating the fluid elements,some of the kinetic energy for the fluid can be turned to the internal heating energy in the form of viscous dissipation phenomena.The contribution in this study is that a similar solution is obtained,in spite of the high nonlinearity of the Carreau model,especially,with the heat flux,variable conductivity,and viscous dissipation phenomena.Some of the major significant findings of this study can be observed from the reduction in the fluid velocity with enhancing the Weissenberg number.Likewise,the increase in the sheet temperature is noted with increasing the Eckert number while the reverse behavior is observed for increasing both the radiation parameter and the conductivity parameter.Finally,the accuracy and trust in the proposed numerical method are validated after benchmarking for our data onto the earlier results.展开更多
A series of linear stability analysis is carried out on the onset of thermal convection in the presence of spatial variations of viscosity, thermal conductivity and expansivity. We consider the temporal evolution of a...A series of linear stability analysis is carried out on the onset of thermal convection in the presence of spatial variations of viscosity, thermal conductivity and expansivity. We consider the temporal evolution of an infinitesimal perturbation superimposed to a static （motionless） and con- ductive state in a basally-heated planar layer. From the changes in flow patterns with increasing the amplitudes of temperature dependence of viscosity, we identified the transition into the ＂stagnant-lid＂ （ST） regime, where the convection occurs only beneath a thick and stagnant-lid of cold fluid at the top surface. Detailed analysis showed a significant increase of the aspect ratio of convection cells in ST regime induced by the spatial variations in thermal conductivity and/or expansivity： the horizon- tal length scale of ST convection can be enlarged by up to 50% with 10 times increase of thermal conductivity with depth. We further developed an analytical model of ST convection which success- fully reproduced the mechanism of increasing horizontal length scale of ST regime convection cells for given spatial variations in physical properties. Our findings may highlight the essential roles of the spatial variation of thermal conductivity on the convection patterns in the mantle.展开更多
The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effe...The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effects. The temperature dependent thermal conductivity of the Casson fluid is considered. The relevant equations are first simplified under usual boundary layer assumptions, and then transformed into ordinary differential equations by suitable transformations. The transformed ordinary differential equations are computed for the series solutions of velocity and temperature. A convergence analysis is shown explicitly. Velocity and temperature fields are discussed for different physical parameters by graphs and numerical values. It is found that the velocity decreases with the increase in the angle of inclination while increases with the increase in the mixed convection parameter. The enhancement in the thermal conductivity and radiation effects corresponds to a higher fluid temperature. It is also found that heat transfer is more pronounced in a cylinder when it is compared with a flat plate. The thermal boundary layer thickness increases with the increase in the Eckert number. The radiation and variable thermal conductivity decreases the heat transfer rate at the surface.展开更多
To make heat conduction equation embody the essence of physical phenomenon under study, dimensionless factors were introduced and the transient heat conduction equation and its boundary conditions were transformed to ...To make heat conduction equation embody the essence of physical phenomenon under study, dimensionless factors were introduced and the transient heat conduction equation and its boundary conditions were transformed to dimensionless forms. Then, a theoretical solution model of transient heat conduction problem in one-dimensional double-layer composite medium was built utilizing the natural eigenfunction expansion method. In order to verify the validity of the model, the results of the above theoretical solution were compared with those of finite element method. The results by the two methods are in a good agreement. The maximum errors by the two methods appear when τ（τ is nondimensional time） equals 0.1 near the boundaries of ζ =1 （ζ is nondimensional space coordinate） and ζ =4. As τ increases, the error decreases gradually, and when τ =5 the results of both solutions have almost no change with the variation of coordinate 4.展开更多
A rapid method to determine glutamic acid (Glu) in cerebrospinal fluid (CSF) by capillaryelectrophoresis with high frequency conductivity detection (contactless conductivity detection) wasdescribed. The CSF sample was...A rapid method to determine glutamic acid (Glu) in cerebrospinal fluid (CSF) by capillaryelectrophoresis with high frequency conductivity detection (contactless conductivity detection) wasdescribed. The CSF sample was pretreated with silver cation resin to remove high concentration ofCl- ions in CSF. The separation was achieved in the buffer solution of 10 mmol/L Tris and 8mmol/L boric acid at the separation voltage of 20.0 kV. Glu showed linear response in the range of5.0×10-6 to 6.0×10-3 mol/L, the limit of detection was 1.0×10-6 mol/L. The method was used foranalysis Glu in CSF satisfactorily with a recovery of 97.8-98.8%.展开更多
In this study,the stagnation point transport of second grade fluid with linear stretching under the effects of variable thermal conductivity is considered.Induced magnetic field impact is also incorporated.The nonline...In this study,the stagnation point transport of second grade fluid with linear stretching under the effects of variable thermal conductivity is considered.Induced magnetic field impact is also incorporated.The nonlinear set of particle differential equations is converted into set of ordinary differential equations through appropriate transformation.The resulting equations are then resolved by optimal homotopy analysis method.The effect of pertinent parameters of interest on skin friction coefficient,temperature,induced magnetic field,velocity and local Nusselt number is inspected by generating appropriate plots.For numerical results,the built-in bvp4 c technique in computational software MATLAB is used for the convergence and residual errors of obtained series solution.It is perceived that the induced magnetic field is intensified by increasing β.It can also be observed that skin friction coefficient enhances with increasing value of magnetic parameter depending on the stretching ratio a/c.For the validness of the obtained results,a comparison has been made and an excellent agreement of current study with existing literature is found.展开更多
基金supported by the National Natural Foundation of China(No.52171146)the HFIPS Director's Fund(No.BJPY2023A08)the Natural Science Foundation of Anhui Province(No.2108085ME145).
文摘Because of the large coefficient of thermal expansion (CTE) (23 ppm K^(–1)), aluminum faces challenges in meeting the demands of high dimensional stability in precision instruments, microelectronics, and aerospace. Filling negative thermal expansion (NTE) particles into aluminum can create composites with either zero or low CTEs. However, the resulting composites usually have poor thermal conductivity due to their monolithic configuration, i.e., the NTE particles are filled randomly. Thus, heat sinks should be equipped to assist their usage (e.g., in thermal management). This in turn causes strong thermal stress in the packaging system owing to the high contrast in the CTEs between those monolithic composites and heat sinks typically made of copper or aluminum. Here, we propose a gradient configuration for low-CTE aluminum composite, inspired by the bamboo structure. The gradient distribution of NTE particles (Zn_(0.5)Sn_(0.3)Mn_(0.2)NMn_(3), ZSM) was obtained by laying up several layers of ZSM/Al with the ZSM fraction ranging from 0 to 28 vol.%. In the gradient composite, the CTE near room temperature varies from 3.4 pm K^(–1) on one side to 21 ppm K^(–1) on the other side. Such a gradient CTE distribution would facilitate the low-thermal-stress designs and thus help stabilize the dimension of a precision system. Furthermore, this composite has a high thermal conductivity of 130 W m^(–1) K^(–1) and strong toughness when the flexural loading is applied on the 28 vol.% ZSM/Al side. Our research provides a novel approach to designing metallic matrix composites with unprecedented performance.
基金financial supported by the National Natural Science Foundation of China(Nos.51672064 and U1435206).
文摘Al2O3f/Al2O3 ceramic matrix composites(CMC)are promising candidate materials of blades and combustor liners of future gas turbines in light of their higher temperature capability,higher environmental stability and oxidizing-free capacity[1–3].Nevertheless,grain growth,sintering and creep deformation at high operation temperatures are still serious problems for Al2O3f/Al2O3 ceramic matrix composites,which can lead to a reduction in the strength and damage tolerance[2].Moreover,Al2O3 can be corroded by the high temperature water vapor in combustion environments and yields volatile products,such as Al(OH)3[4].Consequently,environmental barrier coatings(EBCs)are necessary for Al2O3f/Al2O3 ceramic matrix composites,which can protect Al2O3f/Al2O3 CMC from high temperature and flowing combustion gas corrosion and thus increase the high temperature capability and the service life of components.
基金support of the National Natural Science Foundation of China (Grants 11501495, 51541912, 51409227)the Natural Science Foundation of Jiangsu Province, China (Grants BK20130436, BK20150436)+1 种基金the Postdoctoral Science Foundation of China (Grants 2014M550310, 2015M581869, 2015T80589)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province (Grant 15KJB110025)
文摘In this paper, a corrected particle method based on the smoothed particle hydrodynamics (SPH) method with high-order Taylor expansion (CSPH-HT) for solving the viscoelastic flow is proposed and investigated. The validity and merits of the CSPH-HT method are first tested by solving the nonlinear high order Kuramoto-Sivishinsky equation and simulating the drop stretching, respectively. Then the flow behaviors behind two stationary tangential cylinders of polymer melt, which have been received little attention, are investigated by the CSPH-HT method. Finally, the CSPH-HT method is extended to the simulation of the filling process of the viscoelastic fluid. The numerical results show that the CSPH-HT method possesses higher accuracy and stability than other corrected SPH methods and is more reliable than other corrected SPH methods.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10974183 and 11104252)the Doctoral Fund of the Ministry of Education of China(Grant No.20114101110003)+2 种基金the Fund for Science&Technology Innovation Team of Zhengzhou,China(Grant No.112PCXTD337)the Industrial Science and Technology Research Projects of Kaifeng,Henan Province,China(Grant No.1501049)the Key Research Projects of Henan Higher Education Institutions,China(Grant No.18A140014)
文摘Low thermal expansion composites are difficult to obtain by using Al with larger positive thermal expansion coefficient（TEC） and the materials with smaller negative TECs. In this investigation, Y2Mo3O12 with larger negative TEC is used to combine with Al to obtain a low thermal expansion composite with high conductivity. The TEC of Al is reduced by 19%for a ratio Al：Y2Mo3O12 of 0.3118. When the mass ratio of Al：Y2Mo3O12 increases to 2.0000, the conductivity of the composite increases so much that a transformation from capacitance to pure resistance appears. The results suggest that Y2Mo3O12 plays a dominant role in the composite for low content of Al（presenting isolate particles）, while the content of Al increases enough to contact each other, the composite presents mainly the property of Al. For the effect of high content Al, it is considered that Al is squeezed out of the cermets during the uniaxial pressure process to form a thin layer on the surface.
基金supported by the National Natural Science Foundation of China(No.81970978)the Zhejiang Provincial Natural Science Foundation of China(No.LQ18H140004)the Zhejiang Provincial Medical Health&Hygienic Science and Technology Project of China(Nos.2018KY365,2019RC156,and 2020KY449)。
文摘Midpalatal corticotomy-assisted rapid maxillary expansion(MCRME)is a minimally invasive treatment of maxillary transverse deficiency(MTD)in young adults.However,the effect of MCRME on respiratory function still needs to be determined.In this study,we evaluated the changes in maxillary morphology and the upper airway following MCRME using computational fluid dynamics(CFD).Twenty patients with MTD(8 males,12 females;mean age 20.55 years)had cone-beam computed tomography(CBCT)images taken before and after MCRME.The CBCT data were used to construct a threedimensional(3 D)upper airway model.The upper airway flow characteristics were simulated using CFD,and measurements were made based on the CBCT images and CFD.The results showed that the widths of the palatal bone and nasal cavity,and the intermolar width were increased significantly after MCRME.The volume of the nasal cavity and nasopharynx increased significantly,while there were no obvious changes in the volumes of the oropharynx and hypopharynx.CFD simulation of the upper airway showed that the pressure drop and maximum velocity of the upper airway decreased significantly after treatment.Our results suggest that in these young adults with MTD,increasing the maxillary width,upper airway volume,and quantity of airflow by MCRME substantially improved upper airway ventilation.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11574276,51702097,and 11574083)the Program for Innovative Research Team(in Science and Technology)in University of Henan Province,China(Grant No.16IRTSTHN017)Henan Science and Technology Development Project,China(Grant No.182102210241)
文摘Low thermal expansion materials are mostly ceramics with low conductive property, which limits their applications in electronic devices. The poor conductive property of ceramic ZrV_2 O_7 could be improved by bi-substitution of Fe and Mo for Zr and V, accompanied with low thermal expansion. Zr_(0.1) Fe_(0.9) V_(1.1 )Mo_(0.9 )O_7 has electrical conductivity of 8.2× 10^(-5) S/cm and 9.41× 10^(-4) S/cm at 291 K and 623 K, respectively. From 291 K to 413 K, thermal excitation leads to the increase of carrier concentration, which causes the rapid decrease of resistance. At 413–533 K, the conductivity is unchanged due to high scattering probability and a slowing increase of carrier concentration. The conductivity rapidly increases again from533 K to 623 K due to the intrinsic thermal excitation. The thermal expansion coefficient of Zr_(0.1) Fe_(0.9) V_(1.1 )Mo_(0.9 )O_7 is as low as 0.72× 10^(-6 )K^(-1) at 140–700 K from the dilatometer measurement. These properties suggest that Zr_(0.1) Fe_(0.9) V_(1.1 )Mo_(0.9 )O_7 has attractive application in electronic components.
文摘The simulation results on viscoelastic fluid flows in sudden expansion geometry with different expansion ratios are presented. Oldroyd-B, linear Phan-Thien-Tanner （L-PTT） and Finitely Extensible Nonlinear Elastic （FENE-P） based constitutive equations were applied in two-dimensional Cartesian coordinates. The governing equations in transient and fully developed regions were solved using open source software called OpenFOAM. The flow patterns, including velocity profiles, shear stresses and first normal stress differences in some horizontal and vertical sections are illustrated. In addition, effects of the fluid type, flow dynamics and expansion ratio on the flow and vortex patterns in transient and fully developed regions are presented and discussed. The presented results show that existences of vortices cause the inverse velocity and negative stresses in expansion regions of the channel which increase with increment of expansion ratio and Weissenberg number （We）. Furthermore, some dead spaces can be observed at channel expansion regions close to the wall which are also increased. The results also show that at low We numbers all fluids show close behavior while at high We numbers the FENE-P fluid behavior shows high divergence from that of the two other fluids.
基金Funded by the Natural Science Foundation of China(No50572079)Program for New Century Excellent Talents in University of MOE(No.NCET-04-0724)It is grateful to supports from the International Collaboration Program of Jeonbuk Province and Hubei Province Key Laboratory of Refractories and Ceramics-Ministry-Province Jointly-Constructed Cultivation Base for State Key Laboratory(No.G0704)
文摘Ln0.6Sr0.4Co0.2Fe0.2O3 （Ln=La, Pr, Nd, Sm） perovskite-type complex oxides were synthesized using a glycine-nitrate process, and the structure, electrical conducting and thermal expansion properties of the resulting ceramics were examined with regard to the nature of the lanthanide cations. The results indicated that the La, Pr and Nd specimens had a rhombohedral symmetry, while an orthorhombic structure was determined for the Sm specimen. The pseudo-cubic lattice constant decreased with smaller lanthanide cations. It was found that the electrical conducting properties declined with decreasing lanthanide cation size. Fortunately, all the compositions remained rather high electrical conductivities exceeding 650 Ω ^-1m·cm^-1 in the intermediate temperature range （600-800 ℃）. An appreciable thermal expansion increase at high temperatures was detected for all the compositions. Decreasing the size of the lanthanide cations resulted in an increase of thermal expansion. With respect to the high electrical conductivities, the Ln0.6Sr0.4Co0.8Fe0.2O3 oxides are considered to be acceptable as mixed conducting component in composite cathode designs together with doped ceria electrolytes.
文摘Among the several methods used to solve the Navier-Stokes equations Hierarchical Expansion Method has demonstrated satisfactory results. This work aimed to apply the expansion of the variables in hierarchical functions for the solution of the Navier-Stokes equations for incompressible fluids in two dimensions in laminar flow. This method is based on the finite element method. The expansion functions in this study were based on Legendre polynomials, adjusted in the rectangular elements in such a way that corner, side and area functions were defined. The order of the expansion functions associated with the sides and with the area of the elements is adjusted to the necessary or desired degree. This method is denominated by Hierarchical Expansion Method. In order to validate the proposed numeric method three well-known problems of the literature in two dimensions were analyzed;however, for this paper only one problem was presented. The results demonstrated that method was able to provide precise results. From the results obtained in this paper it is possible to conclude that the hierarchical expansion method can be effective for the solution of fluid dynamic problems that involve incompressible fluids.
基金supported by NSFC(Grant No.11947408 and 11875196)。
文摘In this paper,we study the Joule–Thomson expansion for RN-AdS black holes immersed in perfect fluid dark matter.As perfect fluid dark matter is one of the dark matter candidates,we are interested in how it influences the thermodynamic properties of black holes.Firstly,the negative cosmological constant could be interpreted as thermodynamic pressure and its conjugate quantity as the thermodynamic volume,which give us more physical insights into the black hole.Moreover,we derive the thermodynamic definitions and study the critical behaviour of the black hole.Secondly,the explicit expression of Joule–Thomson coefficient is obtained from the basic formulas of the pressure,the volume,the entropy and the temperature.Then,we obtain the inversion curves in terms of charge Q and parameterλ.Furthermore,we analyse the isenthalpic curve in T–P graph with the cooling–heating region determined by the inversion curve.At last,we derive the ratio of minimum inversion temperature to critical temperature and compare the result with that in the RN-AdS case.
文摘The effect of an inclined magnetic field in the peristaltic flow of a Jeffrey fluid with variable thermal conductivity is discussed. The temperature dependent thermal conductivity of fluid in an asymmetric channel is taken into account. A dimensionless nonlinear system subject to a long wavelength and a low Reynolds number is solved. The explicit expressions of the stream function, the axial velocity, the pressure gradient, and the temperature are obtained. The effects of all physical parameters on peristaltic transport and heat transfer characteristics are observed from graphical illustrations. The behaviors of θ∈ [0, π/2] and θ∈ [π/2, π] on fluid flow and heat transfer are found to be opposite. Further, the size of trapped bolus is greater for the case of the inclined magnetic field （θ≠ π/2） than that for the case of the transverse magnetic field （θ = π/2）. The heat transfer coefficient decreases when the constant thermal conductivity （Newtonian） fluid is changed to the variable thermal conductivity （Jeffrey） fluid.
基金This work was financially supported by the Iran National Science Foundation(No.96000854).
文摘Hydrostatic cyclic expansion extrusion(HCEE) process at elevated temperatures is proposed as a method for processing less deformable materials such as magnesium and for producing long ultrafine-grained rods. In the HCEE process at elevated temperatures, high-pressure molten linear low-density polyethylene(LLDPE) was used as a fluid to eliminate frictional forces. To study the capability of the process,AM60 magnesium rods were processed and the properties were investigated. The mechanical properties were found to improve significantly after the HCEE process. The yield and ultimate strengths increased from initial values of 138 and 221 MPa to 212 and 317 MPa, respectively.Moreover, the elongation was enhanced due to the refined grains and the existence of high hydrostatic pressure. Furthermore, the microhardness was increased from HV 55.0 to HV 72.5. The microstructural analysis revealed that ultrafine-grained structure could be produced by the HCEE process. Moreover, the size of the particles decreased, and these particles thoroughly scattered between the grains. Finite element analysis showed that the HCEE was independent of the length of the sample, which makes the process suitable for industrial applications.
基金supported by the Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah,Saudi Arabia (No. 2-135/HiCi)
文摘This article addresses the three-dimensional stretched flow of the Jeffrey fluid with thermal radiation. The thermal conductivity of the fluid varies linearly with respect to temperature. Computations are performed for the velocity and temperature fields. Graphs for the velocity and temperature are plotted to examine the behaviors with different parameters. Numerical values of the local Nusselt number are presented and discussed. The present results are compared with the existing limiting solutions, showing good agreement with each other.
基金supported by The National Key Research and Development Program of China(2020YFA0210704)。
文摘Orientation control of anisotropic one-dimensional(1D)and two-dimensional(2D)materials in solutions is of great importance in many fields ranging from structural materials design,the thermal management,to energy storage.Achieving fine control of vertical alignment of anisotropic fillers(such as graphene,boron nitride(BN),and carbon fiber)remains challenging.This work presents a universal and scalable method for constructing vertically aligned structures of anisotropic fillers in composites assisted by the expansion flow(using2D BN platelets as a proof-of-concept).BN platelets in the silicone gel strip are oriented in a curved shape that includes vertical alignment in the central area and horizontal alignment close to strip surfaces.Due to the vertical orientation of BN in the central area of strips,a throughplane thermal conductivity as high as 5.65 W m^(-1) K^(-1) was obtained,which can be further improved to 6.54 W m^(-1) K^(-1) by combining BN and pitch-based carbon fibers.The expansion-flow-assisted alignment can be extended to the manufacture of a variety of polymer composites filled with 1D and 2D materials,which can find wide applications in batteries,electronics,and energy storage devices.
文摘A sophisticated theoretical and mathematical model is proposed.It is verified that this model can estimate and monitor the detailed behavior for the steady Carreau fluid flow past a nonlinear stretching surface and the predicted phenomena due to the presence of heat flux,thermal radiation,and viscous dissipation.Despite the fact that some properties of the fluid do not depend on the temperature,the fluid thermal conductivity is assumed to depend on the temperature.Based on accelerating the fluid elements,some of the kinetic energy for the fluid can be turned to the internal heating energy in the form of viscous dissipation phenomena.The contribution in this study is that a similar solution is obtained,in spite of the high nonlinearity of the Carreau model,especially,with the heat flux,variable conductivity,and viscous dissipation phenomena.Some of the major significant findings of this study can be observed from the reduction in the fluid velocity with enhancing the Weissenberg number.Likewise,the increase in the sheet temperature is noted with increasing the Eckert number while the reverse behavior is observed for increasing both the radiation parameter and the conductivity parameter.Finally,the accuracy and trust in the proposed numerical method are validated after benchmarking for our data onto the earlier results.
基金acknowledge thorough support from the Global COE program from the Ministry of Education, Culture, Sports and Technology (MEXT) of Japan
文摘A series of linear stability analysis is carried out on the onset of thermal convection in the presence of spatial variations of viscosity, thermal conductivity and expansivity. We consider the temporal evolution of an infinitesimal perturbation superimposed to a static （motionless） and con- ductive state in a basally-heated planar layer. From the changes in flow patterns with increasing the amplitudes of temperature dependence of viscosity, we identified the transition into the ＂stagnant-lid＂ （ST） regime, where the convection occurs only beneath a thick and stagnant-lid of cold fluid at the top surface. Detailed analysis showed a significant increase of the aspect ratio of convection cells in ST regime induced by the spatial variations in thermal conductivity and/or expansivity： the horizon- tal length scale of ST convection can be enlarged by up to 50% with 10 times increase of thermal conductivity with depth. We further developed an analytical model of ST convection which success- fully reproduced the mechanism of increasing horizontal length scale of ST regime convection cells for given spatial variations in physical properties. Our findings may highlight the essential roles of the spatial variation of thermal conductivity on the convection patterns in the mantle.
文摘The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effects. The temperature dependent thermal conductivity of the Casson fluid is considered. The relevant equations are first simplified under usual boundary layer assumptions, and then transformed into ordinary differential equations by suitable transformations. The transformed ordinary differential equations are computed for the series solutions of velocity and temperature. A convergence analysis is shown explicitly. Velocity and temperature fields are discussed for different physical parameters by graphs and numerical values. It is found that the velocity decreases with the increase in the angle of inclination while increases with the increase in the mixed convection parameter. The enhancement in the thermal conductivity and radiation effects corresponds to a higher fluid temperature. It is also found that heat transfer is more pronounced in a cylinder when it is compared with a flat plate. The thermal boundary layer thickness increases with the increase in the Eckert number. The radiation and variable thermal conductivity decreases the heat transfer rate at the surface.
基金Projects(50576007,50876016) supported by the National Natural Science Foundation of ChinaProjects(20062180) supported by the National Natural Science Foundation of Liaoning Province,China
文摘To make heat conduction equation embody the essence of physical phenomenon under study, dimensionless factors were introduced and the transient heat conduction equation and its boundary conditions were transformed to dimensionless forms. Then, a theoretical solution model of transient heat conduction problem in one-dimensional double-layer composite medium was built utilizing the natural eigenfunction expansion method. In order to verify the validity of the model, the results of the above theoretical solution were compared with those of finite element method. The results by the two methods are in a good agreement. The maximum errors by the two methods appear when τ（τ is nondimensional time） equals 0.1 near the boundaries of ζ =1 （ζ is nondimensional space coordinate） and ζ =4. As τ increases, the error decreases gradually, and when τ =5 the results of both solutions have almost no change with the variation of coordinate 4.
基金This project was supported by the Guangdong Provincial Foundation of Natural Science(021808)
文摘A rapid method to determine glutamic acid (Glu) in cerebrospinal fluid (CSF) by capillaryelectrophoresis with high frequency conductivity detection (contactless conductivity detection) wasdescribed. The CSF sample was pretreated with silver cation resin to remove high concentration ofCl- ions in CSF. The separation was achieved in the buffer solution of 10 mmol/L Tris and 8mmol/L boric acid at the separation voltage of 20.0 kV. Glu showed linear response in the range of5.0×10-6 to 6.0×10-3 mol/L, the limit of detection was 1.0×10-6 mol/L. The method was used foranalysis Glu in CSF satisfactorily with a recovery of 97.8-98.8%.
文摘In this study,the stagnation point transport of second grade fluid with linear stretching under the effects of variable thermal conductivity is considered.Induced magnetic field impact is also incorporated.The nonlinear set of particle differential equations is converted into set of ordinary differential equations through appropriate transformation.The resulting equations are then resolved by optimal homotopy analysis method.The effect of pertinent parameters of interest on skin friction coefficient,temperature,induced magnetic field,velocity and local Nusselt number is inspected by generating appropriate plots.For numerical results,the built-in bvp4 c technique in computational software MATLAB is used for the convergence and residual errors of obtained series solution.It is perceived that the induced magnetic field is intensified by increasing β.It can also be observed that skin friction coefficient enhances with increasing value of magnetic parameter depending on the stretching ratio a/c.For the validness of the obtained results,a comparison has been made and an excellent agreement of current study with existing literature is found.
