This study investigated the effects of weathering depth and thickness on the failure mechanisms of rock samples through experimental and numerical methods.The first configuration involved conducting artificial weather...This study investigated the effects of weathering depth and thickness on the failure mechanisms of rock samples through experimental and numerical methods.The first configuration involved conducting artificial weathering on limestone using the freezing and thawing(F-T)for 40 cycles.The mechanical parameters of the samples were measured at the end of the 40th cycle.In the second configuration,a series of specimens underwent salt crystallization(S-C)tests for 20 cycles.Experimental results were validated using discrete element method(DEM).Next,the weathered limestone model with dimensions of 108 mm54 mm were prepared.The weathering layers were tested at four different thicknesses(i.e.2.5 mm,5 mm,7.5 mm,and 10 mm)and three different positions(at the surface,5 mm under the rock surface,and 10 mm under the rock surface).According to the results,weathering depth and thickness have a considerable effect on the failure process.The results also showed a correlation between the values of compressive strength and failure mechanisms associated with the weathering layer.The numerical results revealed that the tension crack was the dominant factor.Additionally,with increasing weathering thickness,Young's modulus,crack initiation stress,and final strength decreased in constant weathering depth.The results also demonstrated that the failure progress of the numerical models was similar to that observed in the laboratory.展开更多
Aqueous Zn-ion battery(AZIB)has become an attractive technology because of its unique features of low cost,high safety and the eco-friendliness.MnO_(2) is the model cathode material for AZIB since the first report on ...Aqueous Zn-ion battery(AZIB)has become an attractive technology because of its unique features of low cost,high safety and the eco-friendliness.MnO_(2) is the model cathode material for AZIB since the first report on reversible Zn-MnO_(2) battery,but recent studies have unveiled different charge storage mechanisms.Due to revamping of the electrochemistry and redesigning of the electrolyte and interface,there is tremendous performance enhancement in AZIB.This mini Review will first give a brief introduction of ZIB,including fundamentals of materials and components,and the progress in recent years.Then,a general classification of working mechanisms related to MnO_(2) in neutral and mildly acidic electrolyte is elaborated.Our focus is put on the recent blossoming Zn-MnO_(2) electrolytic mechanism,which has given birth to the Zn-MnO_(2) redox flow batteries that are highly promising for large-scale static energy storage.展开更多
It has not been a simple matter to obtain a sound extension of the classical J2 flow theory of plasticity that incorporates a dependence on plastic strain gradients and that is capable of capturing size-dependent beha...It has not been a simple matter to obtain a sound extension of the classical J2 flow theory of plasticity that incorporates a dependence on plastic strain gradients and that is capable of capturing size-dependent behaviour of metals at the micron scale. Two classes of basic extensions of classical J2 theory have been proposed： one with increments in higher order stresses related to increments of strain gradients and the other characterized by the higher order stresses themselves expressed in terms of increments of strain gradients. The theories proposed by Muhlhans and Aifantis in 1991 and Fleck and Hutchinson in 2001 are in the first class, and, as formulated, these do not always satisfy thermodynamic requirements on plastic dissipation. On the other hand, theories of the second class proposed by Gudmundson in 2004 and Gurtin and Anand in 2009 have the physical deficiency that the higher order stress quantities can change discontinuously for bodies subject to arbitrarily small load changes. The present paper lays out this background to the quest for a sound phenomenological extension of the rateindependent J2 flow theory of plasticity to include a de- pendence on gradients of plastic strain. A modification of the Fleck-Hutchinson formulation that ensures its thermo- dynamic integrity is presented and contrasted with a comparable formulation of the second class where in the higher or- der stresses are expressed in terms of the plastic strain rate. Both versions are constructed to reduce to the classical J2 flow theory of plasticity when the gradients can be neglected and to coincide with the simpler and more readily formulated J2 deformation theory of gradient plasticity for deformation histories characterized by proportional straining.展开更多
Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster managem...Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster management perspective.This study presents a numerical model called debris flow simulation 2D(DFS 2D)and applicability of the proposed model is investigated through the values of the model parameters used for the reproduction of an occurred debris flow at Yindongzi gully in China on 13 August 2010.The model can be used to simulate debris flows using three different rheologies and has a userfriendly interface for providing the inputs.Using DFS 2D,flow parameters can be estimated with respect to space and time.The values of the flow resistance parameters of model,dry-Coulomb and turbulent friction,were calibrated through the back analysis and the values obtained are 0.1 and 1000 m/s^(2),respectively.Two new methods of calibration are proposed in this study,considering the crosssectional area of flow and topographical changes induced by the debris flow.The proposed methods of calibration provide an effective solution to the cumulative errors induced by coarse-resolution digital elevation models(DEMs)in numerical modelling of debris flows.The statistical indices such as Willmott's index of agreement,mean-absolute-error,and normalized-root-mean-square-error of the calibrated model are 0.5,1.02 and 1.44,respectively.The comparison between simulated and observed values of topographic changes indicates that DFS 2D provides satisfactory results and can be used for dynamic modelling of debris flows.展开更多
High-purity N2 was used to increase the mobile phase flow rate during ion purification of ion-exchange resin. This was performed to improve the efficiency of isotope separation and puri- fication, and to meet the effi...High-purity N2 was used to increase the mobile phase flow rate during ion purification of ion-exchange resin. This was performed to improve the efficiency of isotope separation and puri- fication, and to meet the efficiency requirements of rapid multiple-collector-inductively coupled plasma mass spectrometry （MC-ICPMS） analysis. For Cu isotope separation, our results indicated that at a gas flow rate 〉60 mL/min, the separation chromatographic peaks broadened and the re-covery rate decreased to 〈99.2%. On the other hand, no significant change in the Cu peaks was ob- served at a gas flow rate of 20 mL/min and the recovery rate was determined to be 〉99.9%. The Cu isotope ratio, measured by the standard-sample bracketing method, agreed with reference data within a±2 SD error range. The separation time was reduced from the traditional 10 h （without N2） to 4 h （with N2）, indicating that the efficiency was more than doubled. Moreover, Sr and Nd isotope separation in AGV-2 （US Geological Survey andesite standard sample） accelerated with a 20 mL/min gas flow, demonstrating that with the passage of N2, the purified liquid comprised Rb/Sr and Sm/Nd ratios of 〈0.000 049 and 〈0.000 001 5, respectively. This indicated an effective separation of Rb from Sr and Sm from Nd. MC-ICPMS could therefore be applied to accurately determine Sr and Nd isotope ratios. The results afforded were consistent with the reference data within a±2 SD error range and the total separation time was shortened from 2 d to 〈10 h.展开更多
A two-dimensionM discrete element code, particle flow code （PFC2D）, is employed to investigate foundations reinforced with horizontal-vertical （H-V） inclusions. The initial states and loading processes of both unr...A two-dimensionM discrete element code, particle flow code （PFC2D）, is employed to investigate foundations reinforced with horizontal-vertical （H-V） inclusions. The initial states and loading processes of both unreinforced and H-V reinforced foundations are simulated by PFC2D method. The interface between particles and reinforcements, and the reinforcement mechanism of the H-V reinforced foundations are studied through stress distribution graphs, displacement vector graphs and contact force graphs. The simulation results demonstrate that the vertical elements of the H-V reinforcement keep the particles from being displaced under the applied load. The H-V reinforcement can distribute the load uniformly over a wider area, thereby improving the bearing capacity of soil foundation.展开更多
The complexity of a rock masses structure can lead to high uncertainties and risk during underground engineering construction.Laboratory tests on fractured rock-like materials containing a tunnel were conducted,and tw...The complexity of a rock masses structure can lead to high uncertainties and risk during underground engineering construction.Laboratory tests on fractured rock-like materials containing a tunnel were conducted,and twodimensional particle flow models were established.The principal stress and principal strain distributions surrounding the four-arc-shaped and inverted U-shaped tunnels were investigated,respectively.Numerical results indicated that the dip angle combination of preexisting fractures directly affects the principal stress,principal strain distribution and the failure characteristics around the tunnel.The larger the absolute value of the preexisting fracture inclination angle,the higher the crushing degree of compression splitting near the hance and the larger the V-shaped failure zone.With a decrease in the absolute value of the preexisting fracture inclination angle,the compressive stress concentration of the sidewall with preexisting fractures gradually increases.The types of cracks initiated around the four-arc-shaped tunnel and the inverted U-shape tunnel are different.When the fractures are almost vertical,they have a significant influence on the stress of the sidewall force of the four-arc-shaped tunnel.When the fractures are almost horizontal,they have a significant influence on the stress of the sidewall of the inverted U-shaped tunnel.The findings provide a theoretical support for the local strengthening design of the tunnel supporting structure.展开更多
The flexibility of molecular catalysts is highly coveted for the electrochemical reduction of carbon dioxide(CO_(2)) to carbon monoxide(CO) in both homogeneous and heterogeneous systems.While the electrocatalytic acti...The flexibility of molecular catalysts is highly coveted for the electrochemical reduction of carbon dioxide(CO_(2)) to carbon monoxide(CO) in both homogeneous and heterogeneous systems.While the electrocatalytic activity of molecular catalysts has been widely studied in H-cells;their less studied capabilities in more efficient flow cell reactors have the potential to rival that of heterogeneous catalysts.In this work,a comparative study of amino functionalized iron-tetraphenylporphyrins(amino-Fe-TPPs) immobilized onto carbonaceous materials in both H-cells and flow cells was conducted to selectively reduce CO_(2) to CO.In a flow cell set up operating in alkaline media,the resulting hybrid catalyst exhibits 87% faradaic efficiency(FE) with extraordinary current density(j) of 119 mA/cm^(2) and turnover frequency(TOF) of 14 s^(-1) at-1.0 V vs.RHE.This remarkable catalytic activity was achieved through thoughtful combination of molecular and flow cell design that provides an effective strategy for future immobilized heterogeneous approaches toward CO_(2) reduction reactions(CO_(2) RRs).展开更多
We present a study on n-type ternary InGaN layers grown by atmospheric pressure metalorganic vapour phase epitaxy （MOVPE） on GaN template/（0001） sapphire substrate. An investigation of the different growth conditi...We present a study on n-type ternary InGaN layers grown by atmospheric pressure metalorganic vapour phase epitaxy （MOVPE） on GaN template/（0001） sapphire substrate. An investigation of the different growth conditions on n-type InxGa1-xN （x = 0.06 -- 0.135） alloys was done for a series of five samples. The structural, electrical and optical properties were characterized by high resolution x-ray diffraction （HRXRD）, Hall effect and photolumineseence （PL）. Experimental results showed that different growth conditions, namely substrate rotation （SR） and change of total H2 flow （THF）, strongly affect the properties of InGaN layers. This case can be clearly observed from the analytical results. When the SR speed decreased, the HRXRD scan peak of the samples shifted along a higher angle. Therefore, increasing the SR speed changed important structural properties of InGaN alloys such as peak broadening, values of strain, lattice parameters and defects including tilt, twist and dislocation density. From PL results it is observed that the growth conditions can be changed to control the emission wavelength and it is possible to shift the emission wavelength towards the green. Hall effect measurement has shown that the resistivity of the samples changes dramatically when THF changes.展开更多
A novel heterogeneous oscillator, the Cu2+-catalyzed oscillatory oxidation of ascorbic acid (Vitamin C) in aqueous solution by O-2 flow was reported. Both the potential oscillations on Pt-electrode corresponding to [C...A novel heterogeneous oscillator, the Cu2+-catalyzed oscillatory oxidation of ascorbic acid (Vitamin C) in aqueous solution by O-2 flow was reported. Both the potential oscillations on Pt-electrode corresponding to [Cu2+] and the absorbance oscillations at lambda =260 nm corresponding to [ascorbic acid] were observed. Oscillations in the completely homogeneous system were also observed. Effects of several factors on the oscillations were investigated.展开更多
In situ TiB2 reinforced 6351 Al alloy composites were subjected to compression testing at strain rates and temperatures ranging from 0.001 to 10 s -1 and from 300 to 550？欲espectively,using Gleeble-1500D system.And t...In situ TiB2 reinforced 6351 Al alloy composites were subjected to compression testing at strain rates and temperatures ranging from 0.001 to 10 s -1 and from 300 to 550？欲espectively,using Gleeble-1500D system.And the associated microstructural transformations and instability phenomena were studied by observations of the optical and transmission electron microscope.The power dissipation efficiency and instability parameter were calculated following the dynamic material model and plotted with the temperature and logarithm of strain rate to obtain processing maps for strains of 0.2,0.4,and 0.6.The processing maps present the instability zones at higher strain rates.The result shows that with increasing strain,the instability zones enlarge.The microstructural examination shows that the interface separates even the particle cracks or aligns along the shear direction of the adiabatic shear band in the instability zones.Two domains of higher efficiencies correspond to dynamic recovery and dynamic recrystallization during the hot deformation.Using the processing maps,the optimum processing parameters of stain rates and temperatures can be chosen for effective hot deformation of TiB2/6351 composites.展开更多
Catalyst-free graphene films has been synthesized by microwave (MW) surface wave plasma (SWP) chemical vapor deposition (CVD) using hydrogenated carbon source on silicon substrates at low temperature (500℃). The synt...Catalyst-free graphene films has been synthesized by microwave (MW) surface wave plasma (SWP) chemical vapor deposition (CVD) using hydrogenated carbon source on silicon substrates at low temperature (500℃). The synthesized process is simple, low-cost and possible for application on transparent electrodes, gas sensors and thin film resistors. Analytical methods such as Raman spectroscopy, transmission electron microscopy (TEM) and four points prove resistivity measurement and UV-VIS-NIR spectroscopy were employed to characterize properties of the graphene films. The formation of multilayer of graphene on silicon substrate was confirmed by Raman spectroscopy and TEM. It is possible to grow graphene directly on silicon substrate (without using catalyst) due to high radical density of MW SWP CVD. In addition, we also observed that the hydrogen had significant role for quality of graphene.展开更多
A new silicon micro flow sensor with multiple temperature sensing elements was proposed and numerically simulated in considering wide range flow measuring properties.The micro flow sensor has three pairs of temperatur...A new silicon micro flow sensor with multiple temperature sensing elements was proposed and numerically simulated in considering wide range flow measuring properties.The micro flow sensor has three pairs of temperature sensing elements with a central heater compared with typical sensor which has only a temperature sensing element on each side of a central heater.A numerical analysis of the micro flow sensor by Finite Difference Formulation for Heat Transfer Equation was performed.The nearest pair of temperature sensor showed very good linear sensitivity between 0 to 0.4m/s flow and saturated from 0.75m/s flow.However the furthest pair of temperature sensor showed some flow sensitivity even though the flow rate of 2.0m/s.Thus,this suggested new micro flow meter with multiple temperature sensing elements could be used as a thermal mass flow sensor which has accuracy sensitivity for very wide flow range.展开更多
The lower Yellow River still faces the threat of flood due to the unusual precipitation caused by global environmental change, river channel sedimentation, hidden danger in the dike and unfavorable river regime of ＂h...The lower Yellow River still faces the threat of flood due to the unusual precipitation caused by global environmental change, river channel sedimentation, hidden danger in the dike and unfavorable river regime of ＂hanging river＂. According to the characteristics of the dike-break flood of the Yellow River, this paper has simulated, in six different scenarios, the dike-break flood routing by inputting the terrain data, typical historical flood data and land use data of study area to two-dimensional unsteady flow model. The results show that： firstly, the routing process of flood will occupy other rivers on the way and return to the rivers after reaching the lower reaches; secondly, in the same river reach, flood inundating area of north band is bigger than that at corresponding location of south bank under the same historical flood; thirdly, it is different in the degree of flood inundation in different regions due to different geographical locations in flood plain; fourthly, the area of mainstream where flood is deep and flow velocity is quick is relatively smaller, but the area of non-mainstream, where flood is shallow and flow velocity is slow, is relatively big; and finally, the possible influenced area of the dike-break flood is 141,948 km^2.展开更多
The explicit solution to Cauchy problem for linearized system of two-dimensional isentropic flow with axisymmetrical initial data in gas dynamics is given.
A simple method is proposed, for incremental static analysis of a set of inter-colliding particles, simulating 2D flow. Within each step of proposed algorithm, the particles perform small displacements, proportional t...A simple method is proposed, for incremental static analysis of a set of inter-colliding particles, simulating 2D flow. Within each step of proposed algorithm, the particles perform small displacements, proportional to the out-of-balance forces, acting on them. Numerical experiments show that if the liquid is confined within boundaries of a set of inter-communicating vessels, then the proposed method converges to a final equilibrium state. This incremental static analysis approximates dynamic behavior with strong damping and can provide information, as a first approximation to 2D movement of a liquid. In the initial arrangement of particles, a rhombic element is proposed, which assures satisfactory incompressibility of the fluid. Based on the proposed algorithm, a simple and short computer program (a “pocket” program) has been developed, with only about 120 Fortran instructions. This program is first applied to an amount of liquid, contained in a single vessel. A coarse and refined discretization is tried. In final equilibrium state of liquid, the distribution on hydro-static pressure on vessel boundaries, obtained by proposed computational model, is found in satisfactory approximation with corresponding theoretical data. Then, an opening is formed, at the bottom of a vertical boundary of initial vessel, and the liquid is allowed to flow gradually to an adjacent vessel. Almost whole amount of liquid is transferred, from first to second vessel, except of few drops-particles, which remain, in equilibrium, at the bottom of initial vessel. In the final equilibrium state of liquid, in the second vessel, the free surface level of the liquid confirms that the proposed rhombing element assures a satisfactory incompressibility of the fluid.展开更多
Objective To understand the clinical significance of membrane receptors of interleukin-2 (CD25) in peripheral blood lymphocytes (PBL) of patients with gastric cancer. Methods CD25 percentages in PBL from 110 patients ...Objective To understand the clinical significance of membrane receptors of interleukin-2 (CD25) in peripheral blood lymphocytes (PBL) of patients with gastric cancer. Methods CD25 percentages in PBL from 110 patients with gastric cancer and 100 normal individuals were examined by flow cytometry. Results were analyzed clinically and pathologically. Results Mean CD25% in PBL from normal individuals and patients with gastric cancer were 17.24±5.33 and 22.47±6.82, respectively, and the difference was significant (P<0.01). Abnormally elevated CD25% in PBL from patients with gastric cancer were correlated with tumor site, macropathology type, tumor size, differentiation degree and clinical stage. Conclusion Measuring CD25% in PBL from gastric cancer patients before surgery may provide a reference for diagnosis, immune treatment and judging prognosis.展开更多
文摘This study investigated the effects of weathering depth and thickness on the failure mechanisms of rock samples through experimental and numerical methods.The first configuration involved conducting artificial weathering on limestone using the freezing and thawing(F-T)for 40 cycles.The mechanical parameters of the samples were measured at the end of the 40th cycle.In the second configuration,a series of specimens underwent salt crystallization(S-C)tests for 20 cycles.Experimental results were validated using discrete element method(DEM).Next,the weathered limestone model with dimensions of 108 mm54 mm were prepared.The weathering layers were tested at four different thicknesses(i.e.2.5 mm,5 mm,7.5 mm,and 10 mm)and three different positions(at the surface,5 mm under the rock surface,and 10 mm under the rock surface).According to the results,weathering depth and thickness have a considerable effect on the failure process.The results also showed a correlation between the values of compressive strength and failure mechanisms associated with the weathering layer.The numerical results revealed that the tension crack was the dominant factor.Additionally,with increasing weathering thickness,Young's modulus,crack initiation stress,and final strength decreased in constant weathering depth.The results also demonstrated that the failure progress of the numerical models was similar to that observed in the laboratory.
基金supported by West Light Foundation of The Chinese Academy of Sciences(XAB2019AW09)Singapore Ministry of Education Tier 1 grants(RG 10/18,RG 157/19)。
文摘Aqueous Zn-ion battery(AZIB)has become an attractive technology because of its unique features of low cost,high safety and the eco-friendliness.MnO_(2) is the model cathode material for AZIB since the first report on reversible Zn-MnO_(2) battery,but recent studies have unveiled different charge storage mechanisms.Due to revamping of the electrochemistry and redesigning of the electrolyte and interface,there is tremendous performance enhancement in AZIB.This mini Review will first give a brief introduction of ZIB,including fundamentals of materials and components,and the progress in recent years.Then,a general classification of working mechanisms related to MnO_(2) in neutral and mildly acidic electrolyte is elaborated.Our focus is put on the recent blossoming Zn-MnO_(2) electrolytic mechanism,which has given birth to the Zn-MnO_(2) redox flow batteries that are highly promising for large-scale static energy storage.
文摘It has not been a simple matter to obtain a sound extension of the classical J2 flow theory of plasticity that incorporates a dependence on plastic strain gradients and that is capable of capturing size-dependent behaviour of metals at the micron scale. Two classes of basic extensions of classical J2 theory have been proposed： one with increments in higher order stresses related to increments of strain gradients and the other characterized by the higher order stresses themselves expressed in terms of increments of strain gradients. The theories proposed by Muhlhans and Aifantis in 1991 and Fleck and Hutchinson in 2001 are in the first class, and, as formulated, these do not always satisfy thermodynamic requirements on plastic dissipation. On the other hand, theories of the second class proposed by Gudmundson in 2004 and Gurtin and Anand in 2009 have the physical deficiency that the higher order stress quantities can change discontinuously for bodies subject to arbitrarily small load changes. The present paper lays out this background to the quest for a sound phenomenological extension of the rateindependent J2 flow theory of plasticity to include a de- pendence on gradients of plastic strain. A modification of the Fleck-Hutchinson formulation that ensures its thermo- dynamic integrity is presented and contrasted with a comparable formulation of the second class where in the higher or- der stresses are expressed in terms of the plastic strain rate. Both versions are constructed to reduce to the classical J2 flow theory of plasticity when the gradients can be neglected and to coincide with the simpler and more readily formulated J2 deformation theory of gradient plasticity for deformation histories characterized by proportional straining.
基金financially supported by Department of Space,India(Grant No.ISRO/RES/4/663/18-19)。
文摘Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster management perspective.This study presents a numerical model called debris flow simulation 2D(DFS 2D)and applicability of the proposed model is investigated through the values of the model parameters used for the reproduction of an occurred debris flow at Yindongzi gully in China on 13 August 2010.The model can be used to simulate debris flows using three different rheologies and has a userfriendly interface for providing the inputs.Using DFS 2D,flow parameters can be estimated with respect to space and time.The values of the flow resistance parameters of model,dry-Coulomb and turbulent friction,were calibrated through the back analysis and the values obtained are 0.1 and 1000 m/s^(2),respectively.Two new methods of calibration are proposed in this study,considering the crosssectional area of flow and topographical changes induced by the debris flow.The proposed methods of calibration provide an effective solution to the cumulative errors induced by coarse-resolution digital elevation models(DEMs)in numerical modelling of debris flows.The statistical indices such as Willmott's index of agreement,mean-absolute-error,and normalized-root-mean-square-error of the calibrated model are 0.5,1.02 and 1.44,respectively.The comparison between simulated and observed values of topographic changes indicates that DFS 2D provides satisfactory results and can be used for dynamic modelling of debris flows.
基金co-supported by the National Natural Science Foundation of China (Nos. 41427804, 41421002, 41373004)Program for Changjiang Scholars and Innovative Research Team in University of China (No. IRT1281)the MOST Research Foundation from the State Key Laboratory of Continental Dynamics
文摘High-purity N2 was used to increase the mobile phase flow rate during ion purification of ion-exchange resin. This was performed to improve the efficiency of isotope separation and puri- fication, and to meet the efficiency requirements of rapid multiple-collector-inductively coupled plasma mass spectrometry （MC-ICPMS） analysis. For Cu isotope separation, our results indicated that at a gas flow rate 〉60 mL/min, the separation chromatographic peaks broadened and the re-covery rate decreased to 〈99.2%. On the other hand, no significant change in the Cu peaks was ob- served at a gas flow rate of 20 mL/min and the recovery rate was determined to be 〉99.9%. The Cu isotope ratio, measured by the standard-sample bracketing method, agreed with reference data within a±2 SD error range. The separation time was reduced from the traditional 10 h （without N2） to 4 h （with N2）, indicating that the efficiency was more than doubled. Moreover, Sr and Nd isotope separation in AGV-2 （US Geological Survey andesite standard sample） accelerated with a 20 mL/min gas flow, demonstrating that with the passage of N2, the purified liquid comprised Rb/Sr and Sm/Nd ratios of 〈0.000 049 and 〈0.000 001 5, respectively. This indicated an effective separation of Rb from Sr and Sm from Nd. MC-ICPMS could therefore be applied to accurately determine Sr and Nd isotope ratios. The results afforded were consistent with the reference data within a±2 SD error range and the total separation time was shortened from 2 d to 〈10 h.
基金the National Natural Science Foundation of China (Nos. 41202215 and 40972192)the Innovation Program of Shanghai Municipal Education Commission (No. 11ZZ88)the Innovation Foundation of Shanghai University
文摘A two-dimensionM discrete element code, particle flow code （PFC2D）, is employed to investigate foundations reinforced with horizontal-vertical （H-V） inclusions. The initial states and loading processes of both unreinforced and H-V reinforced foundations are simulated by PFC2D method. The interface between particles and reinforcements, and the reinforcement mechanism of the H-V reinforced foundations are studied through stress distribution graphs, displacement vector graphs and contact force graphs. The simulation results demonstrate that the vertical elements of the H-V reinforcement keep the particles from being displaced under the applied load. The H-V reinforcement can distribute the load uniformly over a wider area, thereby improving the bearing capacity of soil foundation.
基金Project(41807241) supported by the National Natural Science Foundation of ChinaProject(2021M693544) supported by China Postdoctoral Science FoundationProject(2022JM-160) supported by the Natural Science Basic Research Program of Shaanxi,China。
文摘The complexity of a rock masses structure can lead to high uncertainties and risk during underground engineering construction.Laboratory tests on fractured rock-like materials containing a tunnel were conducted,and twodimensional particle flow models were established.The principal stress and principal strain distributions surrounding the four-arc-shaped and inverted U-shaped tunnels were investigated,respectively.Numerical results indicated that the dip angle combination of preexisting fractures directly affects the principal stress,principal strain distribution and the failure characteristics around the tunnel.The larger the absolute value of the preexisting fracture inclination angle,the higher the crushing degree of compression splitting near the hance and the larger the V-shaped failure zone.With a decrease in the absolute value of the preexisting fracture inclination angle,the compressive stress concentration of the sidewall with preexisting fractures gradually increases.The types of cracks initiated around the four-arc-shaped tunnel and the inverted U-shape tunnel are different.When the fractures are almost vertical,they have a significant influence on the stress of the sidewall force of the four-arc-shaped tunnel.When the fractures are almost horizontal,they have a significant influence on the stress of the sidewall of the inverted U-shaped tunnel.The findings provide a theoretical support for the local strengthening design of the tunnel supporting structure.
基金supported by NSERC DG 2016-06122 and 201606589 through Discovery Grants to HBK and X.A.Z.,respectivelyby the Canada Foundation for Innovation,Canada Research Chair,and the Ontario Research Fund。
文摘The flexibility of molecular catalysts is highly coveted for the electrochemical reduction of carbon dioxide(CO_(2)) to carbon monoxide(CO) in both homogeneous and heterogeneous systems.While the electrocatalytic activity of molecular catalysts has been widely studied in H-cells;their less studied capabilities in more efficient flow cell reactors have the potential to rival that of heterogeneous catalysts.In this work,a comparative study of amino functionalized iron-tetraphenylporphyrins(amino-Fe-TPPs) immobilized onto carbonaceous materials in both H-cells and flow cells was conducted to selectively reduce CO_(2) to CO.In a flow cell set up operating in alkaline media,the resulting hybrid catalyst exhibits 87% faradaic efficiency(FE) with extraordinary current density(j) of 119 mA/cm^(2) and turnover frequency(TOF) of 14 s^(-1) at-1.0 V vs.RHE.This remarkable catalytic activity was achieved through thoughtful combination of molecular and flow cell design that provides an effective strategy for future immobilized heterogeneous approaches toward CO_(2) reduction reactions(CO_(2) RRs).
基金supported by the State Planning Organization of Turkey (Grant No 2001K120590)
文摘We present a study on n-type ternary InGaN layers grown by atmospheric pressure metalorganic vapour phase epitaxy （MOVPE） on GaN template/（0001） sapphire substrate. An investigation of the different growth conditions on n-type InxGa1-xN （x = 0.06 -- 0.135） alloys was done for a series of five samples. The structural, electrical and optical properties were characterized by high resolution x-ray diffraction （HRXRD）, Hall effect and photolumineseence （PL）. Experimental results showed that different growth conditions, namely substrate rotation （SR） and change of total H2 flow （THF）, strongly affect the properties of InGaN layers. This case can be clearly observed from the analytical results. When the SR speed decreased, the HRXRD scan peak of the samples shifted along a higher angle. Therefore, increasing the SR speed changed important structural properties of InGaN alloys such as peak broadening, values of strain, lattice parameters and defects including tilt, twist and dislocation density. From PL results it is observed that the growth conditions can be changed to control the emission wavelength and it is possible to shift the emission wavelength towards the green. Hall effect measurement has shown that the resistivity of the samples changes dramatically when THF changes.
文摘A novel heterogeneous oscillator, the Cu2+-catalyzed oscillatory oxidation of ascorbic acid (Vitamin C) in aqueous solution by O-2 flow was reported. Both the potential oscillations on Pt-electrode corresponding to [Cu2+] and the absorbance oscillations at lambda =260 nm corresponding to [ascorbic acid] were observed. Oscillations in the completely homogeneous system were also observed. Effects of several factors on the oscillations were investigated.
文摘In situ TiB2 reinforced 6351 Al alloy composites were subjected to compression testing at strain rates and temperatures ranging from 0.001 to 10 s -1 and from 300 to 550？欲espectively,using Gleeble-1500D system.And the associated microstructural transformations and instability phenomena were studied by observations of the optical and transmission electron microscope.The power dissipation efficiency and instability parameter were calculated following the dynamic material model and plotted with the temperature and logarithm of strain rate to obtain processing maps for strains of 0.2,0.4,and 0.6.The processing maps present the instability zones at higher strain rates.The result shows that with increasing strain,the instability zones enlarge.The microstructural examination shows that the interface separates even the particle cracks or aligns along the shear direction of the adiabatic shear band in the instability zones.Two domains of higher efficiencies correspond to dynamic recovery and dynamic recrystallization during the hot deformation.Using the processing maps,the optimum processing parameters of stain rates and temperatures can be chosen for effective hot deformation of TiB2/6351 composites.
文摘Catalyst-free graphene films has been synthesized by microwave (MW) surface wave plasma (SWP) chemical vapor deposition (CVD) using hydrogenated carbon source on silicon substrates at low temperature (500℃). The synthesized process is simple, low-cost and possible for application on transparent electrodes, gas sensors and thin film resistors. Analytical methods such as Raman spectroscopy, transmission electron microscopy (TEM) and four points prove resistivity measurement and UV-VIS-NIR spectroscopy were employed to characterize properties of the graphene films. The formation of multilayer of graphene on silicon substrate was confirmed by Raman spectroscopy and TEM. It is possible to grow graphene directly on silicon substrate (without using catalyst) due to high radical density of MW SWP CVD. In addition, we also observed that the hydrogen had significant role for quality of graphene.
文摘A new silicon micro flow sensor with multiple temperature sensing elements was proposed and numerically simulated in considering wide range flow measuring properties.The micro flow sensor has three pairs of temperature sensing elements with a central heater compared with typical sensor which has only a temperature sensing element on each side of a central heater.A numerical analysis of the micro flow sensor by Finite Difference Formulation for Heat Transfer Equation was performed.The nearest pair of temperature sensor showed very good linear sensitivity between 0 to 0.4m/s flow and saturated from 0.75m/s flow.However the furthest pair of temperature sensor showed some flow sensitivity even though the flow rate of 2.0m/s.Thus,this suggested new micro flow meter with multiple temperature sensing elements could be used as a thermal mass flow sensor which has accuracy sensitivity for very wide flow range.
基金The State Scientific Research Plan, No.96-920-09-01
文摘The lower Yellow River still faces the threat of flood due to the unusual precipitation caused by global environmental change, river channel sedimentation, hidden danger in the dike and unfavorable river regime of ＂hanging river＂. According to the characteristics of the dike-break flood of the Yellow River, this paper has simulated, in six different scenarios, the dike-break flood routing by inputting the terrain data, typical historical flood data and land use data of study area to two-dimensional unsteady flow model. The results show that： firstly, the routing process of flood will occupy other rivers on the way and return to the rivers after reaching the lower reaches; secondly, in the same river reach, flood inundating area of north band is bigger than that at corresponding location of south bank under the same historical flood; thirdly, it is different in the degree of flood inundation in different regions due to different geographical locations in flood plain; fourthly, the area of mainstream where flood is deep and flow velocity is quick is relatively smaller, but the area of non-mainstream, where flood is shallow and flow velocity is slow, is relatively big; and finally, the possible influenced area of the dike-break flood is 141,948 km^2.
文摘The explicit solution to Cauchy problem for linearized system of two-dimensional isentropic flow with axisymmetrical initial data in gas dynamics is given.
文摘A simple method is proposed, for incremental static analysis of a set of inter-colliding particles, simulating 2D flow. Within each step of proposed algorithm, the particles perform small displacements, proportional to the out-of-balance forces, acting on them. Numerical experiments show that if the liquid is confined within boundaries of a set of inter-communicating vessels, then the proposed method converges to a final equilibrium state. This incremental static analysis approximates dynamic behavior with strong damping and can provide information, as a first approximation to 2D movement of a liquid. In the initial arrangement of particles, a rhombic element is proposed, which assures satisfactory incompressibility of the fluid. Based on the proposed algorithm, a simple and short computer program (a “pocket” program) has been developed, with only about 120 Fortran instructions. This program is first applied to an amount of liquid, contained in a single vessel. A coarse and refined discretization is tried. In final equilibrium state of liquid, the distribution on hydro-static pressure on vessel boundaries, obtained by proposed computational model, is found in satisfactory approximation with corresponding theoretical data. Then, an opening is formed, at the bottom of a vertical boundary of initial vessel, and the liquid is allowed to flow gradually to an adjacent vessel. Almost whole amount of liquid is transferred, from first to second vessel, except of few drops-particles, which remain, in equilibrium, at the bottom of initial vessel. In the final equilibrium state of liquid, in the second vessel, the free surface level of the liquid confirms that the proposed rhombing element assures a satisfactory incompressibility of the fluid.
文摘Objective To understand the clinical significance of membrane receptors of interleukin-2 (CD25) in peripheral blood lymphocytes (PBL) of patients with gastric cancer. Methods CD25 percentages in PBL from 110 patients with gastric cancer and 100 normal individuals were examined by flow cytometry. Results were analyzed clinically and pathologically. Results Mean CD25% in PBL from normal individuals and patients with gastric cancer were 17.24±5.33 and 22.47±6.82, respectively, and the difference was significant (P<0.01). Abnormally elevated CD25% in PBL from patients with gastric cancer were correlated with tumor site, macropathology type, tumor size, differentiation degree and clinical stage. Conclusion Measuring CD25% in PBL from gastric cancer patients before surgery may provide a reference for diagnosis, immune treatment and judging prognosis.
