Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of va...Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.展开更多
Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section...Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.展开更多
To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(...To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(NMR)technology has been developed.The apparatus combines sample evacuation,rapid pressurization and saturation,and controlled displacement,enabling systematic investigation of single-phase shale oil flow under representative reservoir conditions.Related experiments allow proper quantification of the activation thresholds and relative contributions of different pore types to flow.A movable fluid index(MFI),defined using dual T_(2) cutoff values,is introduced accordingly and linked to key flow parameters.The results reveal distinct multi-scale characteristics of single-phase shale oil transport,namely micro-scale graded displacement and macro-scale segmented nonlinear behavior.As the injection-production pressure difference increases,flow pathways are activated progressively,beginning with fractures,followed by large and then smaller macropores,leading to a pronounced enhancement in apparent permeability.Although mesopores and micropores contribute little to direct flow,their indirect influence becomes increasingly important,and apparent permeability gradually approaches a stable limit at higher pressure difference.It is also shown that the MFI exhibits a strong negative correlation with the starting pressure gradient and a positive correlation with apparent permeability,providing a rapid and reliable indicator of shale oil flow capacity.Samples containing through-going fractures display consistently higher MFI values and superior flowability compared with those dominated by laminated fractures,highlighting the pivotal role of well-connected fracture networks generated by large-scale hydraulic fracturing in improving shale oil production.展开更多
The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet ...The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet dynamics,are demonstrated in the current research.Hereby,the 2nd Stokes problem assumes that the surface,with a thin shared layer of the fluid on it,oscillates in a harmonic manner along the x-axis of the rivulet flow,which coincides with the main flow direction streaming down the underlying surface.We obtain the exact extension of the rivulet flow family,clarifying the structure of the pressure field,which fully absorbs the arising perturbation.The profile of the velocity field is assumed to be Gaussian-type with a non-zero level of plasticity.Hence,the absolutely non-Newtonian case of the viscoplastic flow solution,which satisfies the motion and continuity equations,is considered(with particular cases of exact solutions for pressure).The perturbed governing equations of motion for rivulet flows then result in the Riccati-type ordinary differential equation(ODE),describing the dynamics of the coordinate x(t).The approximated schematic dynamics are presented in graphical plots.展开更多
The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a...The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a few hundred MeV/u up to 1 GeV/u.It aims to facilitate research on the quantum chromodynamics(QCD)phase structure in the high-baryondensity region.Collective flow is a fundamental observable in heavy-ion collision experiments,providing information on the bulk properties of the produced matter.Although the standard event plane method has been widely used to measure collective flow,it is still important to validate and optimize this method for the CEE spectrometer.In this paper,we study the experimental procedures for measuring directed flow in^(238)U+^(238)U collisions at 500 MeV/u,using event planes reconstructed by Multi-Wire Drift Chamber and Zero Degree Calorimeter,respectively.Jet AA Microscopic(JAM)transport generator is used to generate events,and the detector response is simulated by the CEE Fast Simulation(CFS)package.Finally,the optimal kinematic region for proton directed flow measurements is discussed for the future CEE experiment.展开更多
This study investigates the enhancement of convective heat transfer in a serpentine pipe using ferrofluid flow influenced by dual non-uniform magnetic sources.The primary objective is to improve thermal performance in...This study investigates the enhancement of convective heat transfer in a serpentine pipe using ferrofluid flow influenced by dual non-uniform magnetic sources.The primary objective is to improve thermal performance in compact cooling systems,such as those used in heat exchangers.A two-dimensional,steady-state Computational Fluid Dynamic(CFD)model is developed in ANSYS Fluent to simulate the behavior of an incompressible ferrofluid under applied constant heat flux and magnetic fields.The magnetic force is modeled using the Kelvin force,which acts on magnetized nanoparticles in response to spatially varying electromagnetic fields generated by two strategically positioned current-carrying wires.The effects of magnetic field strength,quantified by the magnetic number(Mn),on flow behavior and temperature distribution are thoroughly analyzed.The results indicate that increasing Mn leads to higher Nusselt numbers,demonstrating enhanced convective heat transfer.Secondary vortices induced by magnetic forcing improve fluid mixing,particularly in curved regions of the pipe.A mesh-independence study and model validation with benchmark data support the reliability of the numerical framework.This work highlights the potential of magnetic-field-assisted thermal control in energy-efficient cooling applications and provides a foundation for the further development of advanced ferrofluid-based heat transfer systems.展开更多
Debris flow events are frequent in Tajikistan,yet comprehensive investigations at the regional scale are limited.This study integrates remote sensing,Geographic Information System,and machine learning techniques to ev...Debris flow events are frequent in Tajikistan,yet comprehensive investigations at the regional scale are limited.This study integrates remote sensing,Geographic Information System,and machine learning techniques to evaluate debris flow susceptibility and associated hazards across Tajikistan.A dataset comprising 405 documented debris flow points and 14 influencing factors,encompassing geological,climatic-hydrological,and anthropogenic variables,was established.Three machine learning algorithms—Random Forest,Support Vector Machine(SVM),and Multi-layer Perceptron—were applied to generate susceptibility maps and delineate debris flow risk zones.The results indicate that the areas of higher and high susceptibility accounted for 20.43%and 4.41%of the national area,respectively,and were predominantly concentrated along the Zeravshan and Vakhsh river basins.Among the evaluated models,SVM model demonstrated the highest predictive performance.Beyond conventional topographic and environmental controls,drought conditions were identified as a critical factor influencing debris flow occurrence within the arid and semi-arid mountainous regions of Tajikistan.These findings provide a scientific basis for regional debris flow risk management and disaster mitigation planning,and offer practical guidance for selecting conditioning factors in machine-learning-based susceptibility assessments in other dry mountainous environments.展开更多
We report an immobilized enzyme-catalyzed batch and continuous-flow synthesis of optically pure ethyl(R)-pantothenate((R)-PaOEt),the direct precursor of d-pantothenic acid.Firstly,a ketoreductase mutant designated as ...We report an immobilized enzyme-catalyzed batch and continuous-flow synthesis of optically pure ethyl(R)-pantothenate((R)-PaOEt),the direct precursor of d-pantothenic acid.Firstly,a ketoreductase mutant designated as M2,carrying two-point mutations of F97L and M242F relative to the wild-type SSCR,was constructed by site-directed mutagenesis,exhibited simultaneously improved activity toward ethyl 2′-ketopantothenate(K-PaOEt)and isopropanol,and could effectively catalyze the stereoselective reduction of K-PaOEt to(R)-PaOEt by using isopropanol as the sacrificial co-substrate to regenerate NADPH.After screening six commercially available carriers,an amino resin LXTE-700 was identified as the best solid support for the immobilization of M2 via the glutaraldehyde activation method.Upon optimization of the immobilization process and reaction conditions,the fabricated immobilized enzyme M2@amino resin demonstrated excellent recyclability and reusability,with the complete conversion of K-PaOEt to(R)-PaOEt being still realized after 12 cycles of reuse.Finally,M2@amino resin-catalyzed synthesis of(R)-PaOEt was successfully implemented in continuous-flow,accomplishing a 6.3 times higher space-time yield than that with the batch synthesis(529.2 versus 84 g L^(-1) d^(-1)).Our developed flow biocatalysis system also features an outstanding operational stability,as evidenced by the 100%conversion rate achieved after 15 consecutive days of operation.展开更多
Vortex-induced vibration(VIV)of an underwater manipulator in pulsating flow presents a notable engineering problem in precise control due to the velocity variation in the flow.This study investigates the VIV response ...Vortex-induced vibration(VIV)of an underwater manipulator in pulsating flow presents a notable engineering problem in precise control due to the velocity variation in the flow.This study investigates the VIV response of an underwater manipulator subjected to pulsating flow,focusing on how different postures affect the behavior of the system.The effects of pulsating parameters and manipulator arrangement on the hydrodynamic coefficient,vibration response,motion trajectory,and vortex shedding behaviors were analyzed.Results indicated that the cross flow vibration displacement in pulsating flow increased by 32.14%compared to uniform flow,inducing a shift in the motion trajectory from a crescent shape to a sideward vase shape.In the absence of interference between the upper and lower arms,the lift coefficient of the manipulator substantially increased with rising pulsating frequency,reaching a maximum increment of 67.0%.This increase in the lift coefficient led to a 67.05%rise in the vibration frequency of the manipulator in the in-line direction.As the pulsating amplitude increased,the drag coefficient of the underwater manipulator rose by 36.79%,but the vibration frequency in the cross-flow direction decreased by 56.26%.Additionally,when the upper and lower arms remained in a state of mutual interference,the cross-flow vibration amplitudes of the upper and lower arms were approximately 1.84 and 4.82 times higher in a circular-elliptical arrangement compared to an elliptical-circular arrangement,respectively.Consequently,the flow field shifted from a P+S pattern to a disordered pattern,disrupting the regularity of the motion trajectory.展开更多
A debris flow descending through an erodible convex colluvial bed,originating from a landslide dam and its upstream deposits,can entrain massive amounts of sediment,dramatically increasing the debris flow volume.Most ...A debris flow descending through an erodible convex colluvial bed,originating from a landslide dam and its upstream deposits,can entrain massive amounts of sediment,dramatically increasing the debris flow volume.Most existing erosion models assume that bed sediments are fully saturated,although this condition is rarely observed in nature.Therefore,a thorough understanding of debris flow overtopping erosion on a convex unsaturated bed is crucial for quantifying disaster risk.In this study,we experimentally investigated the effects of sediment composition,specifically coarse-grain size distribution and fine particle content,on the pore pressure evolution and entrainment of debris flows overriding a convex unsaturated colluvial bed.The average entrainment rate at convex sites for continuously graded bed sediment was higher than its discontinuous counterpart.The measured pore pressures within the unsaturated bed sediments were primarily generated by the passing debris flows.Furthermore,it was found that these pressures decreased as the fine particle content increased and the coarse-grain size of the erodible substrates decreased.When the coarse-grain size of the debris flow was smaller than that of the bed sediment,only a portion of the eroded material was entrained by the moving debris flow.In contrast,when the coarse-grain size of the debris flow was equal to or greater than that of the bed sediment,nearly all of the eroded material was entrained.The findings of this study could contribute to the assessment of hazard amplification and inform the design of mitigation and prevention strategies.展开更多
In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary c...In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary conditions on the flat bottom.Assuming“Reynolds roughness regime”,in which the thickness of the domain is very small compared to the wavelength of the roughness(i.e.a very slight roughness),we rigorously derive a generalized Reynolds equation for pressure,clearly showing the roughness-induced effects.Moreover,we give expressions for the average velocity and microrotation.展开更多
Automated classification of gas flow states in blast furnaces using top-camera imagery typically demands a large volume of labeled data,whose manual annotation is both labor-intensive and cost-prohibitive.To mitigate ...Automated classification of gas flow states in blast furnaces using top-camera imagery typically demands a large volume of labeled data,whose manual annotation is both labor-intensive and cost-prohibitive.To mitigate this challenge,we present an enhanced semi-supervised learning approach based on the Mean Teacher framework,incorporating a novel feature loss module to maximize classification performance with limited labeled samples.The model studies show that the proposed model surpasses both the baseline Mean Teacher model and fully supervised method in accuracy.Specifically,for datasets with 20%,30%,and 40%label ratios,using a single training iteration,the model yields accuracies of 78.61%,82.21%,and 85.2%,respectively,while multiple-cycle training iterations achieves 82.09%,81.97%,and 81.59%,respectively.Furthermore,scenario-specific training schemes are introduced to support diverse deployment need.These findings highlight the potential of the proposed technique in minimizing labeling requirements and advancing intelligent blast furnace diagnostics.展开更多
The present investigation inspects the unsteady,incompressible MHD-induced flow of a ternary hybrid nanofluid made of SiO_(2)(silicon dioxide),ZnO(zinc oxide),and MWCNT(multi-walled carbon nanotubes)suspended in a wat...The present investigation inspects the unsteady,incompressible MHD-induced flow of a ternary hybrid nanofluid made of SiO_(2)(silicon dioxide),ZnO(zinc oxide),and MWCNT(multi-walled carbon nanotubes)suspended in a water-ethylene glycol base fluid between two perforated squeezing Riga plates.This problem is important because it helps us understand the complicated connections between magnetic fields,nanofluid dynamics,and heat transport,all of which are critical for designing thermal management systems.These findings are especially useful for improving the design of innovative cooling technologies in electronics,energy systems,and healthcare applications.No prior study has been done on the theoretical study of the flow of ternary nanofluid(SiO_(2)+ZnO+MWCNT/Water−EthylGl ycol,(60∶40))past a pierced squeezed Riga plates using the boundary value problem solver 4th-order collocation(BVP4C)numerical approach to date.So,the current work has been carried out to fill this gap,and the core purpose of this study is to explore the aspects that enhance the heat transfer of base fluids(H_(2)O/EG)suspended with three nanomaterials SiO_(2),ZnO,and MWCNT.The Riga plates introduce electromagnetic forcing through an embedded array of magnets and electrodes,generating Lorentz forces to regulate the flow.The squeezing effect introduces dynamic boundary movement,which enhances mixing;however,permeability,due to porosity,replicates the true material limits.Similarity transformations of the Navier-Stokes and energy equations result in a highly nonlinear set of ordinary differential equations that govern momentum and thermal energy transport.The subsequent boundary value problem is solved utilizing the BVP4C numerical approach.The study observes the impact of magnetic parameters,squeezing velocity,solid volume percentages of the three nanoparticles,and porous medium factors on velocity and temperature fields.Results show that magnetic fields reduce the velocity profile by 6.75%due to increased squeezing and medium effects.Tri-hybrid nanofluids notice a 9%rise in temperature with higher thermal radiation.展开更多
Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard...Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard types,ice-water phase change,and enhanced mobility of the mass flow.Scientifically simulating these physical phenomena proves challenging.This study introduces GMFA(glacier mass flow analysis),an integrated numerical model that advances the field by:(1)proposing depth-averaged fluctuation energy and internal energy equations,(2)incorporating the ice-water phase change and the entrainment-deposition process,and(3)capturing their effects on mass flow runout characteristics.The model employs the finite volume method to solve the multi-physics coupled governing equations,enabling efficient large-scale simulations.The model is verified through three numerical tests covering flow dynamics,temperature evolution,and thermo-hydro-mechanical runout processes.The model is applied to analyze a hazard chain that occurred on 10 September 2020 on the Tibetan Plateau.The multi-scenario simulation results indicate an entrained mass volume of(4.95±0.11)×10^(5)m^(3),and a ratio of entrained mass volume to source material volume of 0.44.The solid concentration decreases from 0.6-0.7 to 0.1-0.15 with increasing runout distance,indicating a transition from avalanche to debris flood.The internal energy rises by(3-4)×10^(3)kJ/m^(3),driving rapid ice melting from 0.1 to 0.2 to near-zero concentration.The model effectively quantifies volume amplification,ice-water phase changes,and multi-hazard transformations.This model pushes the geoscience frontier,extending computational capability from single-to multi-hazard simulations and providing a powerful tool for analyzing glacier cascading hazards.展开更多
On December 18,2023,a magnitude 6.2 earthquake struck Jishishan County,Gansu Province,triggering a liquefaction-induced flow slide along the loess-mudstone contact zone and causing significant casualties and property ...On December 18,2023,a magnitude 6.2 earthquake struck Jishishan County,Gansu Province,triggering a liquefaction-induced flow slide along the loess-mudstone contact zone and causing significant casualties and property losses.The event featured low-slope,large-scale,runout distance sliding and exhibited a clear cascading disaster chain.Its characteristics closely resemble the catastrophic mudflow at the nearby Lajia Ruins approximately 4,000 years ago.Using high-resolution oblique photogrammetry,cone penetration testing,surface wave analysis,and horizontal-to-vertical spectral ratio methods,this study examines the stratigraphy,groundwater conditions,and geomechanical properties of the affected zone.Results indicate that saturated loess overlying impermeable mudstone formed a high-moisture mass vulnerable to seismic disturbance.Seismic resonance triggered the liquefaction of weakly structured loess,which slide along the contact interface and evolved into a runout distance mudflow.Underground water and terrain modification created a composite weak zone of saturated loess and softened mudstone,which intensified the disaster chain-from earthquake to liquefaction,flow slide,and mudflow.This study contributes to the understanding of deep-seated liquefaction-flow slide disasters,thereby advancing more effective risk mitigation strategies in the Loess Plateau and comparable loess-covered seismic regions.展开更多
A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However...A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.展开更多
To address the issue that hybrid flow shop production struggles to handle order disturbance events,a dynamic scheduling model was constructed.The model takes minimizing the maximum makespan,delivery time deviation,and...To address the issue that hybrid flow shop production struggles to handle order disturbance events,a dynamic scheduling model was constructed.The model takes minimizing the maximum makespan,delivery time deviation,and scheme deviation degree as the optimization objectives.An adaptive dynamic scheduling strategy based on the degree of order disturbance is proposed.An improved multi-objective Grey Wolf(IMOGWO)optimization algorithm is designed by combining the“job-machine”two-layer encoding strategy,the timing-driven two-stage decoding strategy,the opposition-based learning initialization population strategy,the POX crossover strategy,the dualoperation dynamic mutation strategy,and the variable neighborhood search strategy for problem solving.A variety of test cases with different scales were designed,and ablation experiments were conducted to verify the effectiveness of the improved strategies.The results show that each improved strategy can effectively enhance the performance of the IMOGWO.Additionally,performance analysis was conducted by comparing the proposed algorithm with three mature and classical algorithms.The results demonstrate that the proposed algorithm exhibits superior performance in solving the hybrid flow-shop scheduling problem(HFSP).Case validations were conducted for different types of order disturbance scenarios.The results demonstrate that the proposed adaptive dynamic scheduling strategy and the IMOGWO algorithm can effectively address order disturbance events.They enable rapid response to order disturbance while ensuring the stability of the production system.展开更多
The airflow mechanics in adult nasal airways,whether healthy or abnormal,are extensively studied and investigated,but the flow mechanics in child nasal airways remain underexplored.This study investigates the airflow ...The airflow mechanics in adult nasal airways,whether healthy or abnormal,are extensively studied and investigated,but the flow mechanics in child nasal airways remain underexplored.This study investigates the airflow mechanics in the child’s nasal upper airway with adenoid hypertrophy,with an adenoid nasopharyngeal ratio(AN of 0.9),under cyclic inhalation and exhalation.An inlet respiratory cycle with three different flow rates(3.2 L/min calm breathing,8.6 L/min normal breathing,and 19.3 L/min intensive breathing)was simulated by using the computational fluid dynamics approach.To better capture the interaction between airflow and the flexible airway tissue,fluid-structure interaction analysis was performed at the normal breathing rate.Comparing the airflow dynamics during inhalation and exhalation,the pressure drops,nasal resistance,and wall shear stress show significant differences in the nasopharyngeal region for all different flow rates.This observation suggests that the inertial effect associated with the transient flow is important during exhalation and inhalation.Furthermore,the considerable temporal variation in flow rate distribution across a specific cross-section of the nasal airway highlights the critical role of transient data in virtual surgery planning and data for clinical decisions.展开更多
The coupled chemo-mechanical impact of supercritical CO_(2)-H_(2)O(ScCO_(2)-H_(2)O)reactions on fracture geometry and nonlinear flow regimes in deep shale under confining pressures remains inadequately quantified.This...The coupled chemo-mechanical impact of supercritical CO_(2)-H_(2)O(ScCO_(2)-H_(2)O)reactions on fracture geometry and nonlinear flow regimes in deep shale under confining pressures remains inadequately quantified.This study systematically investigates the effects of ScCO_(2)-H_(2)O-shale interactions on fracture morphology and flow properties under confining pressures from 15 MPa to 40 MPa by integrating XRD(X-ray diffraction),micro-CT,3D surface profilometry,and multistage steady-state flow experiments.The results demonstrate that ScCO_(2)-H_(2)O exposure drives pyrite/feldspar dissolution and localized clay precipitation,resulting in fracture branching and macroscopic aperture regularization.Critically,confining pressure dictates the net hydraulic response:under low confining pressure(15-25 MPa),dissolution dominates,enhancing permeability,flow efficiency(Q/VP),and pre-linear flow behavior(n<1).At high confining pressures(30-40 MPa)mechanical compaction and mineral precipitation amplify flow resistance,shifting the flow regime toward quasi-linear behavior,as inertial effects become negligible compared to dominant viscous forces and increased flow resistance.Confining pressure thus critically mediates the dissolution-precipitation balance during ScCO_(2)-H_(2)O treatment,with an optimal window of 15-25 MPa identified for enhancing conductivity while minimizing clogging risk.These findings provide a quantitative framework for predicting stress-dependent flow evolution in chemically altered shale fractures.展开更多
To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hyb...To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hybrid modular multilevel converter–capacitor-commutated line-commutated converter(MMC-CLCC)HVDC transmission system and its corresponding control strategy.First,the system topology is constructed,and a submodule configuration method for the MMC—combining full-bridge submodules(FBSMs)and half-bridge submodules(HBSMs)—is proposed to enable direct power flow reversal.Second,a hierarchical control strategy is introduced,includingMMCvoltage control,CLCC current control,and a coordinationmechanism,along with the derivation of the hybrid system’s power flow reversal characteristics.Third,leveraging the CLCC’s fast current regulation and theMMC’s negative voltage control capability,a coordinated power flow reversal control strategy is developed.Finally,an 800 kV MMC-CLCC hybrid HVDC system is modeled in PSCAD/EMTDC to validate the power flow reversal performance under a high proportion of full-bridge submodule configuration.Results demonstrate that the proposed control strategy enables rapid(1-s transition)and smooth switching of bidirectional power flow without modifying the structure of primary equipment:the transient fluctuation ofDC voltage from the rated value(UdcN)to themaximumreverse voltage(-kUdcN)is less than 5%;the DC current strictly follows the preset characteristic curve with a deviation of≤3%;the active power reverses continuously,and the system maintains stable operation throughout the reversal process.展开更多
基金supported by the University of Seoul’s 2025 Research Fund.
文摘Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.
基金financially supported by Youth Science“Research on Failure Mechanism and Evaluation Method of Sand Control Measures for Railway Machinery in Sandy Area”(12302511)Ningxia Transportation Department Science and Technology Project(20200173)The Central Guidance on Local Science and Technology Development Funds(22ZY1QA005)。
文摘Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.
基金supported by the National Science and Technology Major Project of China(Grant No.2024ZD 1004302)the Key Scientific and Technological Research project of SINOPEC(Grant No.P25186).
文摘To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(NMR)technology has been developed.The apparatus combines sample evacuation,rapid pressurization and saturation,and controlled displacement,enabling systematic investigation of single-phase shale oil flow under representative reservoir conditions.Related experiments allow proper quantification of the activation thresholds and relative contributions of different pore types to flow.A movable fluid index(MFI),defined using dual T_(2) cutoff values,is introduced accordingly and linked to key flow parameters.The results reveal distinct multi-scale characteristics of single-phase shale oil transport,namely micro-scale graded displacement and macro-scale segmented nonlinear behavior.As the injection-production pressure difference increases,flow pathways are activated progressively,beginning with fractures,followed by large and then smaller macropores,leading to a pronounced enhancement in apparent permeability.Although mesopores and micropores contribute little to direct flow,their indirect influence becomes increasingly important,and apparent permeability gradually approaches a stable limit at higher pressure difference.It is also shown that the MFI exhibits a strong negative correlation with the starting pressure gradient and a positive correlation with apparent permeability,providing a rapid and reliable indicator of shale oil flow capacity.Samples containing through-going fractures display consistently higher MFI values and superior flowability compared with those dominated by laminated fractures,highlighting the pivotal role of well-connected fracture networks generated by large-scale hydraulic fracturing in improving shale oil production.
文摘The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet dynamics,are demonstrated in the current research.Hereby,the 2nd Stokes problem assumes that the surface,with a thin shared layer of the fluid on it,oscillates in a harmonic manner along the x-axis of the rivulet flow,which coincides with the main flow direction streaming down the underlying surface.We obtain the exact extension of the rivulet flow family,clarifying the structure of the pressure field,which fully absorbs the arising perturbation.The profile of the velocity field is assumed to be Gaussian-type with a non-zero level of plasticity.Hence,the absolutely non-Newtonian case of the viscoplastic flow solution,which satisfies the motion and continuity equations,is considered(with particular cases of exact solutions for pressure).The perturbed governing equations of motion for rivulet flows then result in the Riccati-type ordinary differential equation(ODE),describing the dynamics of the coordinate x(t).The approximated schematic dynamics are presented in graphical plots.
基金supported in part by the National Key R&D Program of China(No.2024YFA1610700)the National Natural Science Foundation of China(No.12475147)。
文摘The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a few hundred MeV/u up to 1 GeV/u.It aims to facilitate research on the quantum chromodynamics(QCD)phase structure in the high-baryondensity region.Collective flow is a fundamental observable in heavy-ion collision experiments,providing information on the bulk properties of the produced matter.Although the standard event plane method has been widely used to measure collective flow,it is still important to validate and optimize this method for the CEE spectrometer.In this paper,we study the experimental procedures for measuring directed flow in^(238)U+^(238)U collisions at 500 MeV/u,using event planes reconstructed by Multi-Wire Drift Chamber and Zero Degree Calorimeter,respectively.Jet AA Microscopic(JAM)transport generator is used to generate events,and the detector response is simulated by the CEE Fast Simulation(CFS)package.Finally,the optimal kinematic region for proton directed flow measurements is discussed for the future CEE experiment.
文摘This study investigates the enhancement of convective heat transfer in a serpentine pipe using ferrofluid flow influenced by dual non-uniform magnetic sources.The primary objective is to improve thermal performance in compact cooling systems,such as those used in heat exchangers.A two-dimensional,steady-state Computational Fluid Dynamic(CFD)model is developed in ANSYS Fluent to simulate the behavior of an incompressible ferrofluid under applied constant heat flux and magnetic fields.The magnetic force is modeled using the Kelvin force,which acts on magnetized nanoparticles in response to spatially varying electromagnetic fields generated by two strategically positioned current-carrying wires.The effects of magnetic field strength,quantified by the magnetic number(Mn),on flow behavior and temperature distribution are thoroughly analyzed.The results indicate that increasing Mn leads to higher Nusselt numbers,demonstrating enhanced convective heat transfer.Secondary vortices induced by magnetic forcing improve fluid mixing,particularly in curved regions of the pipe.A mesh-independence study and model validation with benchmark data support the reliability of the numerical framework.This work highlights the potential of magnetic-field-assisted thermal control in energy-efficient cooling applications and provides a foundation for the further development of advanced ferrofluid-based heat transfer systems.
基金supported by the National Natural Science Foundation of China(42361144880)the Science and Technology Program of Xizang Autonomous Region,China(XZ202402ZD0001)the Qinghai Province Basic Research Program Project,China(2024-ZJ-904).
文摘Debris flow events are frequent in Tajikistan,yet comprehensive investigations at the regional scale are limited.This study integrates remote sensing,Geographic Information System,and machine learning techniques to evaluate debris flow susceptibility and associated hazards across Tajikistan.A dataset comprising 405 documented debris flow points and 14 influencing factors,encompassing geological,climatic-hydrological,and anthropogenic variables,was established.Three machine learning algorithms—Random Forest,Support Vector Machine(SVM),and Multi-layer Perceptron—were applied to generate susceptibility maps and delineate debris flow risk zones.The results indicate that the areas of higher and high susceptibility accounted for 20.43%and 4.41%of the national area,respectively,and were predominantly concentrated along the Zeravshan and Vakhsh river basins.Among the evaluated models,SVM model demonstrated the highest predictive performance.Beyond conventional topographic and environmental controls,drought conditions were identified as a critical factor influencing debris flow occurrence within the arid and semi-arid mountainous regions of Tajikistan.These findings provide a scientific basis for regional debris flow risk management and disaster mitigation planning,and offer practical guidance for selecting conditioning factors in machine-learning-based susceptibility assessments in other dry mountainous environments.
基金the Science and Technology R&D Major Project of Jiangxi Province(No.20244AFI92001)the National Natural Science Foundation of China(Nos.22071033 and 21801047)for the financial supports.
文摘We report an immobilized enzyme-catalyzed batch and continuous-flow synthesis of optically pure ethyl(R)-pantothenate((R)-PaOEt),the direct precursor of d-pantothenic acid.Firstly,a ketoreductase mutant designated as M2,carrying two-point mutations of F97L and M242F relative to the wild-type SSCR,was constructed by site-directed mutagenesis,exhibited simultaneously improved activity toward ethyl 2′-ketopantothenate(K-PaOEt)and isopropanol,and could effectively catalyze the stereoselective reduction of K-PaOEt to(R)-PaOEt by using isopropanol as the sacrificial co-substrate to regenerate NADPH.After screening six commercially available carriers,an amino resin LXTE-700 was identified as the best solid support for the immobilization of M2 via the glutaraldehyde activation method.Upon optimization of the immobilization process and reaction conditions,the fabricated immobilized enzyme M2@amino resin demonstrated excellent recyclability and reusability,with the complete conversion of K-PaOEt to(R)-PaOEt being still realized after 12 cycles of reuse.Finally,M2@amino resin-catalyzed synthesis of(R)-PaOEt was successfully implemented in continuous-flow,accomplishing a 6.3 times higher space-time yield than that with the batch synthesis(529.2 versus 84 g L^(-1) d^(-1)).Our developed flow biocatalysis system also features an outstanding operational stability,as evidenced by the 100%conversion rate achieved after 15 consecutive days of operation.
基金Supported by the National Natural Science Foundation of China(No.51905211)A Project of the“20 Regulations for New Universities”Funding Program of Jinan(No.202228116).
文摘Vortex-induced vibration(VIV)of an underwater manipulator in pulsating flow presents a notable engineering problem in precise control due to the velocity variation in the flow.This study investigates the VIV response of an underwater manipulator subjected to pulsating flow,focusing on how different postures affect the behavior of the system.The effects of pulsating parameters and manipulator arrangement on the hydrodynamic coefficient,vibration response,motion trajectory,and vortex shedding behaviors were analyzed.Results indicated that the cross flow vibration displacement in pulsating flow increased by 32.14%compared to uniform flow,inducing a shift in the motion trajectory from a crescent shape to a sideward vase shape.In the absence of interference between the upper and lower arms,the lift coefficient of the manipulator substantially increased with rising pulsating frequency,reaching a maximum increment of 67.0%.This increase in the lift coefficient led to a 67.05%rise in the vibration frequency of the manipulator in the in-line direction.As the pulsating amplitude increased,the drag coefficient of the underwater manipulator rose by 36.79%,but the vibration frequency in the cross-flow direction decreased by 56.26%.Additionally,when the upper and lower arms remained in a state of mutual interference,the cross-flow vibration amplitudes of the upper and lower arms were approximately 1.84 and 4.82 times higher in a circular-elliptical arrangement compared to an elliptical-circular arrangement,respectively.Consequently,the flow field shifted from a P+S pattern to a disordered pattern,disrupting the regularity of the motion trajectory.
基金supported by the National Key R&D Program of China(Grant No.2018YFC1505205)the Science and Technology Research Program of the Institute of Mountain Hazards and Environment,Chinese Academy of Sciences(Grant No.IMHE-ZDRW-01)Sichuan Science and Technology Program(Grant No.2024NSFSC0781).
文摘A debris flow descending through an erodible convex colluvial bed,originating from a landslide dam and its upstream deposits,can entrain massive amounts of sediment,dramatically increasing the debris flow volume.Most existing erosion models assume that bed sediments are fully saturated,although this condition is rarely observed in nature.Therefore,a thorough understanding of debris flow overtopping erosion on a convex unsaturated bed is crucial for quantifying disaster risk.In this study,we experimentally investigated the effects of sediment composition,specifically coarse-grain size distribution and fine particle content,on the pore pressure evolution and entrainment of debris flows overriding a convex unsaturated colluvial bed.The average entrainment rate at convex sites for continuously graded bed sediment was higher than its discontinuous counterpart.The measured pore pressures within the unsaturated bed sediments were primarily generated by the passing debris flows.Furthermore,it was found that these pressures decreased as the fine particle content increased and the coarse-grain size of the erodible substrates decreased.When the coarse-grain size of the debris flow was smaller than that of the bed sediment,only a portion of the eroded material was entrained by the moving debris flow.In contrast,when the coarse-grain size of the debris flow was equal to or greater than that of the bed sediment,nearly all of the eroded material was entrained.The findings of this study could contribute to the assessment of hazard amplification and inform the design of mitigation and prevention strategies.
文摘In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary conditions on the flat bottom.Assuming“Reynolds roughness regime”,in which the thickness of the domain is very small compared to the wavelength of the roughness(i.e.a very slight roughness),we rigorously derive a generalized Reynolds equation for pressure,clearly showing the roughness-induced effects.Moreover,we give expressions for the average velocity and microrotation.
基金financial support provided by the Natural Science Foundation of Hebei Province,China(No.E2024105036)the Tangshan Talent Funding Project,China(Nos.B202302007 and A2021110015)+1 种基金the National Natural Science Foundation of China(No.52264042)the Australian Research Council(No.IH230100010)。
文摘Automated classification of gas flow states in blast furnaces using top-camera imagery typically demands a large volume of labeled data,whose manual annotation is both labor-intensive and cost-prohibitive.To mitigate this challenge,we present an enhanced semi-supervised learning approach based on the Mean Teacher framework,incorporating a novel feature loss module to maximize classification performance with limited labeled samples.The model studies show that the proposed model surpasses both the baseline Mean Teacher model and fully supervised method in accuracy.Specifically,for datasets with 20%,30%,and 40%label ratios,using a single training iteration,the model yields accuracies of 78.61%,82.21%,and 85.2%,respectively,while multiple-cycle training iterations achieves 82.09%,81.97%,and 81.59%,respectively.Furthermore,scenario-specific training schemes are introduced to support diverse deployment need.These findings highlight the potential of the proposed technique in minimizing labeling requirements and advancing intelligent blast furnace diagnostics.
基金funded by King Saud University,Riyadh,Saudi Arabia,through the Ongo-ing Research Funding program—Research Chairs(ORF-RC-2025-0127)funded via Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R443).
文摘The present investigation inspects the unsteady,incompressible MHD-induced flow of a ternary hybrid nanofluid made of SiO_(2)(silicon dioxide),ZnO(zinc oxide),and MWCNT(multi-walled carbon nanotubes)suspended in a water-ethylene glycol base fluid between two perforated squeezing Riga plates.This problem is important because it helps us understand the complicated connections between magnetic fields,nanofluid dynamics,and heat transport,all of which are critical for designing thermal management systems.These findings are especially useful for improving the design of innovative cooling technologies in electronics,energy systems,and healthcare applications.No prior study has been done on the theoretical study of the flow of ternary nanofluid(SiO_(2)+ZnO+MWCNT/Water−EthylGl ycol,(60∶40))past a pierced squeezed Riga plates using the boundary value problem solver 4th-order collocation(BVP4C)numerical approach to date.So,the current work has been carried out to fill this gap,and the core purpose of this study is to explore the aspects that enhance the heat transfer of base fluids(H_(2)O/EG)suspended with three nanomaterials SiO_(2),ZnO,and MWCNT.The Riga plates introduce electromagnetic forcing through an embedded array of magnets and electrodes,generating Lorentz forces to regulate the flow.The squeezing effect introduces dynamic boundary movement,which enhances mixing;however,permeability,due to porosity,replicates the true material limits.Similarity transformations of the Navier-Stokes and energy equations result in a highly nonlinear set of ordinary differential equations that govern momentum and thermal energy transport.The subsequent boundary value problem is solved utilizing the BVP4C numerical approach.The study observes the impact of magnetic parameters,squeezing velocity,solid volume percentages of the three nanoparticles,and porous medium factors on velocity and temperature fields.Results show that magnetic fields reduce the velocity profile by 6.75%due to increased squeezing and medium effects.Tri-hybrid nanofluids notice a 9%rise in temperature with higher thermal radiation.
基金supports from the National Natural Science Foundation of China(Grant No.U20A20112)the Research Grants Council of the Hong Kong SAR Government,China(Grant Nos.T22-606/23-R and 16206923).
文摘Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard types,ice-water phase change,and enhanced mobility of the mass flow.Scientifically simulating these physical phenomena proves challenging.This study introduces GMFA(glacier mass flow analysis),an integrated numerical model that advances the field by:(1)proposing depth-averaged fluctuation energy and internal energy equations,(2)incorporating the ice-water phase change and the entrainment-deposition process,and(3)capturing their effects on mass flow runout characteristics.The model employs the finite volume method to solve the multi-physics coupled governing equations,enabling efficient large-scale simulations.The model is verified through three numerical tests covering flow dynamics,temperature evolution,and thermo-hydro-mechanical runout processes.The model is applied to analyze a hazard chain that occurred on 10 September 2020 on the Tibetan Plateau.The multi-scenario simulation results indicate an entrained mass volume of(4.95±0.11)×10^(5)m^(3),and a ratio of entrained mass volume to source material volume of 0.44.The solid concentration decreases from 0.6-0.7 to 0.1-0.15 with increasing runout distance,indicating a transition from avalanche to debris flood.The internal energy rises by(3-4)×10^(3)kJ/m^(3),driving rapid ice melting from 0.1 to 0.2 to near-zero concentration.The model effectively quantifies volume amplification,ice-water phase changes,and multi-hazard transformations.This model pushes the geoscience frontier,extending computational capability from single-to multi-hazard simulations and providing a powerful tool for analyzing glacier cascading hazards.
基金National Natural Science Foundation of China Grant Nos.52378543,52378544 and 52408525the Natural Science Foundation of Heilongjiang Grant No.LH2024E119。
文摘On December 18,2023,a magnitude 6.2 earthquake struck Jishishan County,Gansu Province,triggering a liquefaction-induced flow slide along the loess-mudstone contact zone and causing significant casualties and property losses.The event featured low-slope,large-scale,runout distance sliding and exhibited a clear cascading disaster chain.Its characteristics closely resemble the catastrophic mudflow at the nearby Lajia Ruins approximately 4,000 years ago.Using high-resolution oblique photogrammetry,cone penetration testing,surface wave analysis,and horizontal-to-vertical spectral ratio methods,this study examines the stratigraphy,groundwater conditions,and geomechanical properties of the affected zone.Results indicate that saturated loess overlying impermeable mudstone formed a high-moisture mass vulnerable to seismic disturbance.Seismic resonance triggered the liquefaction of weakly structured loess,which slide along the contact interface and evolved into a runout distance mudflow.Underground water and terrain modification created a composite weak zone of saturated loess and softened mudstone,which intensified the disaster chain-from earthquake to liquefaction,flow slide,and mudflow.This study contributes to the understanding of deep-seated liquefaction-flow slide disasters,thereby advancing more effective risk mitigation strategies in the Loess Plateau and comparable loess-covered seismic regions.
基金supported by the National Natural Science Foundation of China(42471336,52379021 and 42201278)the Hebei Province Backbone Talent Program,China(Returnee Platform for Overseas Study)(A20240028)+2 种基金the Hebei Province Statistical Science Research Project,China(2024HZ04)the Hebei Province Graduate Education and Teaching Reform Research Project,China(YJG2024046)the Innovation Ability Training Program for Postgraduate Students of Hebei Provincial Department of Education,China(CXZZSS2025048)。
文摘A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.
基金funded by National Key Research and Development Program Projects of China under Grant No.2020YFB1713500.
文摘To address the issue that hybrid flow shop production struggles to handle order disturbance events,a dynamic scheduling model was constructed.The model takes minimizing the maximum makespan,delivery time deviation,and scheme deviation degree as the optimization objectives.An adaptive dynamic scheduling strategy based on the degree of order disturbance is proposed.An improved multi-objective Grey Wolf(IMOGWO)optimization algorithm is designed by combining the“job-machine”two-layer encoding strategy,the timing-driven two-stage decoding strategy,the opposition-based learning initialization population strategy,the POX crossover strategy,the dualoperation dynamic mutation strategy,and the variable neighborhood search strategy for problem solving.A variety of test cases with different scales were designed,and ablation experiments were conducted to verify the effectiveness of the improved strategies.The results show that each improved strategy can effectively enhance the performance of the IMOGWO.Additionally,performance analysis was conducted by comparing the proposed algorithm with three mature and classical algorithms.The results demonstrate that the proposed algorithm exhibits superior performance in solving the hybrid flow-shop scheduling problem(HFSP).Case validations were conducted for different types of order disturbance scenarios.The results demonstrate that the proposed adaptive dynamic scheduling strategy and the IMOGWO algorithm can effectively address order disturbance events.They enable rapid response to order disturbance while ensuring the stability of the production system.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFF0707601).
文摘The airflow mechanics in adult nasal airways,whether healthy or abnormal,are extensively studied and investigated,but the flow mechanics in child nasal airways remain underexplored.This study investigates the airflow mechanics in the child’s nasal upper airway with adenoid hypertrophy,with an adenoid nasopharyngeal ratio(AN of 0.9),under cyclic inhalation and exhalation.An inlet respiratory cycle with three different flow rates(3.2 L/min calm breathing,8.6 L/min normal breathing,and 19.3 L/min intensive breathing)was simulated by using the computational fluid dynamics approach.To better capture the interaction between airflow and the flexible airway tissue,fluid-structure interaction analysis was performed at the normal breathing rate.Comparing the airflow dynamics during inhalation and exhalation,the pressure drops,nasal resistance,and wall shear stress show significant differences in the nasopharyngeal region for all different flow rates.This observation suggests that the inertial effect associated with the transient flow is important during exhalation and inhalation.Furthermore,the considerable temporal variation in flow rate distribution across a specific cross-section of the nasal airway highlights the critical role of transient data in virtual surgery planning and data for clinical decisions.
基金support from the Science and Technology Innovation Program of Hunan Province(Grant No.2023RC1021)the Natural Science Foundation of Sichuan Province(Grant No.2025YFHZ0323).-。
文摘The coupled chemo-mechanical impact of supercritical CO_(2)-H_(2)O(ScCO_(2)-H_(2)O)reactions on fracture geometry and nonlinear flow regimes in deep shale under confining pressures remains inadequately quantified.This study systematically investigates the effects of ScCO_(2)-H_(2)O-shale interactions on fracture morphology and flow properties under confining pressures from 15 MPa to 40 MPa by integrating XRD(X-ray diffraction),micro-CT,3D surface profilometry,and multistage steady-state flow experiments.The results demonstrate that ScCO_(2)-H_(2)O exposure drives pyrite/feldspar dissolution and localized clay precipitation,resulting in fracture branching and macroscopic aperture regularization.Critically,confining pressure dictates the net hydraulic response:under low confining pressure(15-25 MPa),dissolution dominates,enhancing permeability,flow efficiency(Q/VP),and pre-linear flow behavior(n<1).At high confining pressures(30-40 MPa)mechanical compaction and mineral precipitation amplify flow resistance,shifting the flow regime toward quasi-linear behavior,as inertial effects become negligible compared to dominant viscous forces and increased flow resistance.Confining pressure thus critically mediates the dissolution-precipitation balance during ScCO_(2)-H_(2)O treatment,with an optimal window of 15-25 MPa identified for enhancing conductivity while minimizing clogging risk.These findings provide a quantitative framework for predicting stress-dependent flow evolution in chemically altered shale fractures.
基金supported by Science and Technology Project of the headquarters of the State Grid Corporation of China(No.5500-202324492A-3-2-ZN).
文摘To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hybrid modular multilevel converter–capacitor-commutated line-commutated converter(MMC-CLCC)HVDC transmission system and its corresponding control strategy.First,the system topology is constructed,and a submodule configuration method for the MMC—combining full-bridge submodules(FBSMs)and half-bridge submodules(HBSMs)—is proposed to enable direct power flow reversal.Second,a hierarchical control strategy is introduced,includingMMCvoltage control,CLCC current control,and a coordinationmechanism,along with the derivation of the hybrid system’s power flow reversal characteristics.Third,leveraging the CLCC’s fast current regulation and theMMC’s negative voltage control capability,a coordinated power flow reversal control strategy is developed.Finally,an 800 kV MMC-CLCC hybrid HVDC system is modeled in PSCAD/EMTDC to validate the power flow reversal performance under a high proportion of full-bridge submodule configuration.Results demonstrate that the proposed control strategy enables rapid(1-s transition)and smooth switching of bidirectional power flow without modifying the structure of primary equipment:the transient fluctuation ofDC voltage from the rated value(UdcN)to themaximumreverse voltage(-kUdcN)is less than 5%;the DC current strictly follows the preset characteristic curve with a deviation of≤3%;the active power reverses continuously,and the system maintains stable operation throughout the reversal process.
