The increasing performance demands of modern aero engines necessitate the integrated design of compressor transition ducts with upstream components to reduce the axial length of the engine.However,this design approach...The increasing performance demands of modern aero engines necessitate the integrated design of compressor transition ducts with upstream components to reduce the axial length of the engine.However,this design approach narrows the spacing between the stator and the strut,making traditional research on transition ducts only with struts unsuitable.The numerical results and experimental oil flow visualization results were utilized to reconstruct the three-dimensional flow structures in the stator passages under various operating conditions.Additionally,numerical methods were employed to analyze the mechanisms of the strut's effect on the upstream stator in an aggressive transition duct.The results show that the strut potential field increases the load on the upstream stator,leading to severe blade surface separation and corner separation/stall,and redistributes the inflow angle of the upstream stators circumferentially,resulting in significant differences in the flow structures within the stator passages on both sides.The separation flows within the stator passages mainly manifest in five types:pressure surface separation vortex,suction surface concentrated shedding vortex,suction surface separation vortex,suction surface-corner stall separation vortex,and suction surface separation vortex pair.Under different operating conditions,the separation flows within the stator passages are always composed of a part of these five types or a transitional state between two of them.展开更多
The flow control at low Reynolds numbers is one of the most promising technologies in the field of aerodynamics,and it is also an important source of the innovation for novel aircraft.In this study,a new way of nonlin...The flow control at low Reynolds numbers is one of the most promising technologies in the field of aerodynamics,and it is also an important source of the innovation for novel aircraft.In this study,a new way of nonlinear flow control by interaction between two flexible flaps is proposed,and their flow control mechanism is studied employing the self-constructed immersed boundary-lattice Boltzmann-finite element method(IB-LB-FEM).The effects of the difference in material properties and flap length between the two flexible flaps on the nonlinear flow control of the airfoil are discussed.It is suggested that the relationship between the deformation of the two flexible flaps and the evolution of the vortex under the fluid-structure interaction(FSI).It is shown that the upstream flexible flap plays a key role in the flow control of the two flexible flaps.The FSI effect of the upstream flexible flap will change the unsteady flow behind it and affect the deformation of the downstream flexible flap.Two flexible flaps with different material properties and different lengths will change their own FSI characteristics by the induced vortex,effectively suppressing the flow separation on the airfoil’s upper surface.The interaction of two flexible flaps plays an extremely important role in improving the autonomy and adjustability of flow control.The numerical results will provide a theoretical basis and technical guidance for the development and application of a new flap passive control technology.展开更多
Bottom water coning is the main reason to reduce the recovery of horizontal bottom water reservoir. By water coning, we mean the oil-water interface changes from a horizontal state to a mound-shaped cone and breaks th...Bottom water coning is the main reason to reduce the recovery of horizontal bottom water reservoir. By water coning, we mean the oil-water interface changes from a horizontal state to a mound-shaped cone and breaks through to the wellbore. Autonomous inflow control device(AICD) is an important instrument maintain normal production after bottom water coning, however, the resistance increasing ability of the swirl type AICD is insufficient at present, which seriously affects the water control effect. Aiming this problem, this paper designs a multi-stage resistance-increasing and composite type AICD. The separation mechanism of oil-water two phases in this structure, the resistance form of oil-water single phase and the resistance-increasing principle of water phase are analyzed. Establishing the dual-phase multi-stage separation and resistance-increasing model, and verified by measuring the throttling pressure drop and oil-water volume fraction of the AICD, it is found that the composite type AICD has the effect of ICD and AICD at the same time, which can balance the production rate of each well section at the initial stage of production, delay the occurrence of bottom water coning. In the middle and later stages of production, water-blocking can be effectively increased to achieve water control and stable production.After structural sensitivity analysis, the influence law of various structural parameters on the water control performance of composite AICD was obtained. The simulation calculation results show that,compared with the existing swirl type AICD, composite AICD has higher sensitivity to moisture content,the water phase throttling pressure drop is increased by 4.5 times on average. The composite AICD is suitable for the entire stage of horizontal well production.展开更多
Experimental investigations are conducted on an axisymmetric hypersonic inlet to evaluate the effects of trips on oscillatory flows. The model exit is throttled with a fixed block to generate oscillatory flows at a fr...Experimental investigations are conducted on an axisymmetric hypersonic inlet to evaluate the effects of trips on oscillatory flows. The model exit is throttled with a fixed block to generate oscillatory flows at a freestream Mach number of 6 in a conventional wind tunnel and a shock tunnel. Schlieren imaging and pressure measurements are adopted to record unsteady flow features.Results indicate that trips with a 1 mm thickness prominently suppress external separations, shorten oscillatory cycles, and modify pressure magnitudes. Trips can reduce the upstream movement ranges of separated shocks from nose regions to locations axially 142 mm downstream. The oscillatory cycles are shortened from 3.75 ms to 3.25 ms and from 4 ms to 3.13 ms in two facilities.Tripped cases generally exhibit higher pressure magnitudes than those of untripped cases, of which the increment is up to 21 times the freestream static pressure for the farthest downstream transducer in the shock tunnel. The effects of trips are related to the streamwise vortexes in wake flows, in which interactions between external separations modify the separated flow patterns and enhance the sustainment of the forebody boundary layers to backpressure. Flow processes causing increments of oscillatory frequencies and pressure magnitudes are analyzed, while the flow mechanisms dominating the processes still need to be clarified in the future.展开更多
In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pr...In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribution measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators （VGs） is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate： （1） Compared with the baseline serpentine design without flow control, the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion （-↑△σ0） decreases from 11.7% to 2.3% by using the VGs. （2） With the descent of the free stream Mach number the total pressure loss decreases. However, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. （3） When Mao = 0.6-0.8, a = -4°-8° and β = 0°-6°, the total pressure recovery varies between 0.936 and 0. 961, the circular total pressure distortion coefficient varies between 1.4 % and 5.4 % and the synthesis distortion coefficient has a ranges from 3.8 % to 7.0 %. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.展开更多
A three-part numerical investigation has been conducted in order to identify the flow separation behavior––the progression of the shock structure, the flow separation pattern with an increase in the nozzle pressure ...A three-part numerical investigation has been conducted in order to identify the flow separation behavior––the progression of the shock structure, the flow separation pattern with an increase in the nozzle pressure ratio（NPR）, the prediction of the separation data on the nozzle wall,and the influence of the gas density effect on the flow separation behavior are included.The computational results reveal that the annular conical aerospike nozzle is dominated by shock/shock and shock/boundary layer interactions at all calculated NPRs, and the shock physics and associated flow separation behavior are quite complex.An abnormal flow separation behavior as well as a transition process from no flow separation at highly over-expanded conditions to a restricted shock separation and finally to a free shock separation even at the deign condition can be observed.The complex shock physics has further influence on the separation data on both the spike and cowl walls, and separation criteria suggested by literatures developed from separation data in conical or bell-type rocket nozzles fail at the prediction of flow separation behavior in the present asymmetric supersonic nozzle.Correlation of flow separation with the gas density is distinct for highly overexpanded conditions.Decreasing the gas density or reducing mass flow results in a smaller adverse pressure gradient across the separation shock or a weaker shock system, and this is strongly coupled with the flow separation behavior.The computational results agree well with the experimental data in both shock physics and static wall pressure distribution at the specific NPRs, indicating that the computational methodology here is advisable to accurately predict the flow physics.展开更多
A 15° swept wing with dielectric barrier discharge plasma actuator is designed. Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. Th...A 15° swept wing with dielectric barrier discharge plasma actuator is designed. Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actua- tion frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.展开更多
In the present study,special attention is paid to numerically investigate the aerodynamic performance of the NACA 0012 airfoil under rain and icing conditions with the aim to better understand the severe aerodynamic p...In the present study,special attention is paid to numerically investigate the aerodynamic performance of the NACA 0012 airfoil under rain and icing conditions with the aim to better understand the severe aerodynamic performance penalties of aircraft in flight.Furthermore,in order to control the flow separation and improve the aerodynamic performance of the airfoil under critical atmospheric conditions,the Gurney flap with different heights is attached to the trailing edge of the airfoil.The simulation is done at a Reynolds number of 3.1 × 105 under different atmospheric conditions including dry,rain,icing and coupling of rain and icing conditions.A two-way momentum coupled Eulerian-Lagrangian multiphase method is used to simulate the process of water film layer formed on the airfoil surface due to rainfall.According to the results,accumulation of water due to rainfall and ice accretion on the airfoil surface inevitably provides notable negative effects on the aerodynamic performance of the airfoil.It is concluded that icing induces a higher aerodynamic degradation than rain due to very intensive ice accretion.The Gurney flap as a passive flow control method with a favorable height for each condition is very beneficial.The maximum increment of the lift-to-drag ratio is achieved by Gurney Hap with a height of 0.01 of airfoil chord length for dry and rain conditions and 0.02 of airfoil chord length for icing and coupling of rain and icing conditions,respectively.展开更多
Boundary layer suction is an e ective method used to delay separations in axial compressors. Most studies on bound?ary layer suction have focused on improving the performance of compressors,whereas few studies investi...Boundary layer suction is an e ective method used to delay separations in axial compressors. Most studies on bound?ary layer suction have focused on improving the performance of compressors,whereas few studies investigated the influence on details of the flow fields,especially vortexes in compressors. CFD method is validated with experi?mental data firstly. Three single?slot and one double?slot endwall boundary layer suction schemes are designed and investigated. In addition to the investigation of aerodynamic performance of the cascades with and without suction,variations in corner open separation,passage vortex,and concentration shedding vortex,which are rarely seen for the flow controlled blades in published literatures,are analyzed. Then,flow models,which are the ultimate aim,of both baseline and aspirated cascades are established. Results show that single?slot endwall suction scheme adjacent to the suction surface can e ectively remove the corner open separation. With suction mass flow rate of 0.85%,the overall loss coe cient and endwall loss coe cient of the cascade are reduced by 25.2% and 48.6%,respectively. Besides,this scheme increases the static pressure rise coe cient of the cascade by 3.2% and the flow turning angle of up to 3.3° at 90% span. The concentration shedding vortex decreases,whereas the passage vortex increases. For single?slot suction schemes near the middle pitchwise of the passage,the concentration shedding vortex increases and the passage vortex is divided into two smaller passage vortexes,which converge into a single?passage vortex near the trailing edge section of the cascade. For the double?slot suction scheme,triple?passage vortexes are presented in the blade passage. Some new vortex structures are discovered,and the novel flow models of aspirated compressor cascade are proposed,which are important to improve the design of multi?stage aspirated compressors.展开更多
Flow separation, as an aerodynamic phenomenon, occurs in specific conditions. The conditions are studied in a wind tunnel on different airfoils. The phenomenon can be delayed or suppressed by exerting an external mome...Flow separation, as an aerodynamic phenomenon, occurs in specific conditions. The conditions are studied in a wind tunnel on different airfoils. The phenomenon can be delayed or suppressed by exerting an external momentum to the flow. Dielectric barrier discharge actuators arranged in a row of 8 and perpendicular to the flow direction can delay flow separation by exerting the momentum. In this study, a mathematical model is developed to predict a parameter, which is utilized to represent flow separation on an NACA0012 airfoil. The model is based on the neurofuzzy method applied to experimental datasets. The neuro model is trained in different flow conditions and the parameter is measured by pressure sensors.展开更多
The interactions of cnoidal waves with a submerged quartercircular breakwater are investigated by a ReynoldsAveraged Navier–Stokes(RANS) flow solver with a Volume of Fluid(VOF) surface capturing scheme(RANSVOF) model...The interactions of cnoidal waves with a submerged quartercircular breakwater are investigated by a ReynoldsAveraged Navier–Stokes(RANS) flow solver with a Volume of Fluid(VOF) surface capturing scheme(RANSVOF) model. The vertical variation of the instantaneous velocity indicates that flow separation occurs at the boundary layer near the breakwater. The temporal evolution of the velocity and vorticity fields demonstrates vortex generation and shedding around the submerged quartercircular breakwater due to the flow separation. An empirical relationship between the vortex intensity and a few hydrodynamic parameters is proposed based on parametric analysis. In addition, the instantaneous and time-averaged vorticity fields reveal a pair of vortices of opposite signs at the breakwater which are expected to have significant effect on sediment entrainment, suspension, and transportation,therefore, scour on the leeside of the breakwater.展开更多
Dielectric barrier discharge （DBD） plasma is one of most promising flow control method for its several advantages. The present work investigates the control authority of nanosecond pulse DBD plasma actuators on a fl...Dielectric barrier discharge （DBD） plasma is one of most promising flow control method for its several advantages. The present work investigates the control authority of nanosecond pulse DBD plasma actuators on a flying wing model＇s aerodynamic characteristics. The aerodynamic forces and moments are studied by means of experiment and numerical simulation. The numerical simulation results are in good agreement with experiment results. Both results indicate that the NS-DBD plasma actuators have negligible effect on aerodynamic forces and moment at the angles of attack smaller than 16-. However, significant changes can be achieved with actuation when the model＇s angle of attack is larger than 16° where the flow separation occurs. The spatial flow field structure results from numerical simulation suggest that the volumetric heat produced by NS-DBD plasma actuator changes the local temperature and density and induces several vortex structures, which strengthen the mixing of the shear layer with the main flow and delay separation or even reattach the separated flow.展开更多
Numerical studies of the flow past a circular cylinder at Reynolds number 1.4 × 105 and NACA0021 airfoil at the angle of attack 60° have been carried out by scale-adaptive simulation （SAS） and detached edd...Numerical studies of the flow past a circular cylinder at Reynolds number 1.4 × 105 and NACA0021 airfoil at the angle of attack 60° have been carried out by scale-adaptive simulation （SAS） and detached eddy simu- lation （DES）, in comparison with the existing experimental data. The new version of the model developed by Egorov and Menter is assessed, and advantages and disadvantages of the SAS simulation are analyzed in detail to provide guidance for industrial application in the future. Moreover, the mechanism of the scale-adaptive characteristics in separated regions is discussed, which is obscure in previous analyses. It is con- cluded that： the mean flow properties satisfactorily agree with the experimental results for the SAS simulation, although the prediction of the second order turbulent statistics in the near wake region is just reasonable. The SAS model can produce a larger magnitude of the turbulent kinetic energy in the recir- culation bubble, and, consequently, a smaller recirculation region and a more rapid recovery of the mean velocity out- side the recirculation region than the DES approach with the same grid resolution. The vortex shedding is slightly less irregular with the SAS model than with the DES approach, probably due to the higher dissipation of the SAS simulation under the condition of the coarse mesh.展开更多
The questions on how vortices are constructed and on the relationship between the flow patterns and concentration distributions in real street canyons are the most pressing questions in pollution control studies. In t...The questions on how vortices are constructed and on the relationship between the flow patterns and concentration distributions in real street canyons are the most pressing questions in pollution control studies. In this paper, the very large eddy simulation (VLES) and large eddy simulation (LES) are applied to calculate the flow and pollutant concentration fields in an urban street canyon and a cross-road respectively. It is found that the flow separations are not only related to the canyon aspect ratios, but also with the flow velocities and wall temperatures. And the turbulent dispersions are so strongly affected by the flow fields that the pollutant concentration distributions can be distinguished from the different aspect ratios, flow velocities and wall temperatures.展开更多
Flow separation and secondary flow in the S-duct of an aircraft engine cause severe pressure loss and airflow distortion at the outlet,lowering engine performance.Herein,a serial two-electrode plasma synthetic jet(PSJ...Flow separation and secondary flow in the S-duct of an aircraft engine cause severe pressure loss and airflow distortion at the outlet,lowering engine performance.Herein,a serial two-electrode plasma synthetic jet(PSJ)actuator array is used to actively control the flow field in the duct and improve its characteristics.The results show that the PSJ significantly increases the wall pressure recovery coefficient,suppresses flow separation,and improves the outlet pressure distortion.The primary and secondary orders of the influencing factors are as follows:control position>jet momentum coefficient>excitation frequency>jet configuration.The best jet control position is near the separation location,and the best jet configuration is the‘Λ’configuration.The higher the jet momentum coefficient and excitation frequency,the better the flow control.The wall pressure coefficient increases by up to 127.8%,and the outlet steady pressure distortion index decreases by 9.15%.The control mechanism is the direct energy injection into the flow boundary layer through a high-speed jet and the indirect control effect of the induced streamwise vortex.On the one hand,the PSJ suppresses flow separation by improving the ability of the boundary layer to resist the inverse pressure gradient.On the other hand,it reduces pressure distortion by decreasing the intensity of the secondary flow and weakening the backflow.This study thus provides a new technology for the active control of the flow-field characteristics in an S-duct and has significance for guiding the application of synthetic jet technology in S-ducts.展开更多
The numerical investigation has been performed to explore the feasibility of vortex control by leading edge sucking excitation on a delta wing. The results reveal that the flow on the upper surface of the delta wing c...The numerical investigation has been performed to explore the feasibility of vortex control by leading edge sucking excitation on a delta wing. The results reveal that the flow on the upper surface of the delta wing changes significantly in a wide range of the angle of attack. For the vortical flow at moderate angle of attack, the secondary and tertiary vortices are weakened or suppressed, and the total lift is almost unchanged. For the stalled flow at high angle of attack, the leading edge concentrated vortex is recovered, and the lift is enhanced with increasing suction rate. For the bluff-body flow at even high angles of attack, the lift can still be improved. The concentrated vortex disappears on the upper surface, and the load increment is nearly unchanged along the chordwise direction.展开更多
In this paper a viscous-inviscid interacting flow theory(IFT)is developed for an incompressible, two-dimensional laminar flow.IFT's main points are as follows.(1)By introducing a concept of interaction lay- er whe...In this paper a viscous-inviscid interacting flow theory(IFT)is developed for an incompressible, two-dimensional laminar flow.IFT's main points are as follows.(1)By introducing a concept of interaction lay- er where the normal momentum exchange is dominating,a new three layer structure is established.(2)Through the conventional manipulations and by introducing an interaction model,both the streamwise and normal length scales are proved to be functions of a single parameter m,which is related to the streamwise pressure gradient and Reynolds number.(3)The approximate equations governing the flow of each layer as well as the whole interaction flow are derived.The present IFT is applicable to both attached and attached-separation bubble-reattached flows, The classical boundary layer theory and Triple-deck theory are shown to be two special cases of the present theory under m=0 and 1/4,respectively.Furthermore IFT provides new distinctions of both the normal and streamwise length scales for flow-field numerical computation and also gives a new approach to developing the simpli- fied Navier-Stokes(SNS)equations.展开更多
The present paper proposes a Lagrangian criterion of unsteady flow separation for two-dimensional periodic flows based on the principle of weighted averaging zero skin-friction given by Haller （HALLER, G. Exact theor...The present paper proposes a Lagrangian criterion of unsteady flow separation for two-dimensional periodic flows based on the principle of weighted averaging zero skin-friction given by Haller （HALLER, G. Exact theory of unsteady separation for two-dimensional flows. Journal of Fluid Mechanics, 512, 257-311 （2004））. By analyzing the distribution of the finite-time Lyapunov exponent （FTLE） along the no-slip wall, it can be found that the periodic separation takes place at the point of the zero FTLE. This new criterion is verified with an analytical solution of the separation bubble and a numerical simulation of lid-driven cavity flows.展开更多
The effects of the micro-ramps on supersonic turbulent flow over a forward-facing step（FFS） was experimentally investigated in a supersonic low-noise wind tunnel at Mach number 3 using nano-tracer planar laser scatt...The effects of the micro-ramps on supersonic turbulent flow over a forward-facing step（FFS） was experimentally investigated in a supersonic low-noise wind tunnel at Mach number 3 using nano-tracer planar laser scattering（NPLS）and particle image velocimetry（PIV） techniques. High spatiotemporal resolution images and velocity fields of supersonic flow over the testing model were captured. The fine structures and their spatial evolutionary characteristics without and with the micro-ramps were revealed and compared. The large-scale structures generated by the micro-ramps can survive the downstream FFS flowfield. The micro-ramps control on the flow separation and the separation shock unsteadiness was investigated by PIV results. With the micro-ramps, the reduction in the range of the reversal flow zone in streamwise direction is 50% and the turbulence intensity is also reduced. Moreover, the reduction in the average separated region and in separation shock unsteadiness are 47% and 26%, respectively. The results indicate that the micro-ramps are effective in reducing the flow separation and the separation shock unsteadiness.展开更多
The influence of the structure and running parameters of a novel spiral oil wedge hybrid journal bearing on the fluid flow trace is investigated. The governing equation of the flow trace of lubricant is set up, and th...The influence of the structure and running parameters of a novel spiral oil wedge hybrid journal bearing on the fluid flow trace is investigated. The governing equation of the flow trace of lubricant is set up, and the simulation is carried out by using finite difference method. The results show that the lubricant flow status and end leakage quantity are greatly influenced by spiral angle,and that the rotating speed has little influence on the flow status. With advisable geometry design, the separation of lubricant between different oil wedges can be obtained, which can decrease the temperature rise effectively.展开更多
基金supported by the National Natural Science Foundation of China(No.52276025)the Science Center for Gas Turbine Project of China(Nos.P2022-A-Ⅱ-001-001,P2022-A-Ⅱ-002-001 and P2022-B-Ⅱ-002-001)。
文摘The increasing performance demands of modern aero engines necessitate the integrated design of compressor transition ducts with upstream components to reduce the axial length of the engine.However,this design approach narrows the spacing between the stator and the strut,making traditional research on transition ducts only with struts unsuitable.The numerical results and experimental oil flow visualization results were utilized to reconstruct the three-dimensional flow structures in the stator passages under various operating conditions.Additionally,numerical methods were employed to analyze the mechanisms of the strut's effect on the upstream stator in an aggressive transition duct.The results show that the strut potential field increases the load on the upstream stator,leading to severe blade surface separation and corner separation/stall,and redistributes the inflow angle of the upstream stators circumferentially,resulting in significant differences in the flow structures within the stator passages on both sides.The separation flows within the stator passages mainly manifest in five types:pressure surface separation vortex,suction surface concentrated shedding vortex,suction surface separation vortex,suction surface-corner stall separation vortex,and suction surface separation vortex pair.Under different operating conditions,the separation flows within the stator passages are always composed of a part of these five types or a transitional state between two of them.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.92371201,52192633,11872293,and 92152301)the Natural Science Basic Research Program of Shaanxi(Grant Nos.2024JC-YBQN-0008,and 2022JC-03)+1 种基金Shaanxi Key Research and Development Program(Grant No.2022ZDLGY02-07)the Joint Natural Science Foundation of China with Guangdong Province for TianHe-II Supercomputer Resources,and the Research Start-up Foundation of Xi’an University of Science and Technology for the High-Level Talent.
文摘The flow control at low Reynolds numbers is one of the most promising technologies in the field of aerodynamics,and it is also an important source of the innovation for novel aircraft.In this study,a new way of nonlinear flow control by interaction between two flexible flaps is proposed,and their flow control mechanism is studied employing the self-constructed immersed boundary-lattice Boltzmann-finite element method(IB-LB-FEM).The effects of the difference in material properties and flap length between the two flexible flaps on the nonlinear flow control of the airfoil are discussed.It is suggested that the relationship between the deformation of the two flexible flaps and the evolution of the vortex under the fluid-structure interaction(FSI).It is shown that the upstream flexible flap plays a key role in the flow control of the two flexible flaps.The FSI effect of the upstream flexible flap will change the unsteady flow behind it and affect the deformation of the downstream flexible flap.Two flexible flaps with different material properties and different lengths will change their own FSI characteristics by the induced vortex,effectively suppressing the flow separation on the airfoil’s upper surface.The interaction of two flexible flaps plays an extremely important role in improving the autonomy and adjustability of flow control.The numerical results will provide a theoretical basis and technical guidance for the development and application of a new flap passive control technology.
基金supported by National Natural Science Foundation(52204050)Sichuan Science and Technology Program(2021ZHCG0013,22ZDYF3009)。
文摘Bottom water coning is the main reason to reduce the recovery of horizontal bottom water reservoir. By water coning, we mean the oil-water interface changes from a horizontal state to a mound-shaped cone and breaks through to the wellbore. Autonomous inflow control device(AICD) is an important instrument maintain normal production after bottom water coning, however, the resistance increasing ability of the swirl type AICD is insufficient at present, which seriously affects the water control effect. Aiming this problem, this paper designs a multi-stage resistance-increasing and composite type AICD. The separation mechanism of oil-water two phases in this structure, the resistance form of oil-water single phase and the resistance-increasing principle of water phase are analyzed. Establishing the dual-phase multi-stage separation and resistance-increasing model, and verified by measuring the throttling pressure drop and oil-water volume fraction of the AICD, it is found that the composite type AICD has the effect of ICD and AICD at the same time, which can balance the production rate of each well section at the initial stage of production, delay the occurrence of bottom water coning. In the middle and later stages of production, water-blocking can be effectively increased to achieve water control and stable production.After structural sensitivity analysis, the influence law of various structural parameters on the water control performance of composite AICD was obtained. The simulation calculation results show that,compared with the existing swirl type AICD, composite AICD has higher sensitivity to moisture content,the water phase throttling pressure drop is increased by 4.5 times on average. The composite AICD is suitable for the entire stage of horizontal well production.
基金co-supported by the China Postdoctoral Science Foundation (No. 2017M612059)the Fundamental Research Funds for the Central Universities of China (JZ2015HGBZ0471)the National Natural Science Foundation of China (Nos. 11402263 and 11132010)
文摘Experimental investigations are conducted on an axisymmetric hypersonic inlet to evaluate the effects of trips on oscillatory flows. The model exit is throttled with a fixed block to generate oscillatory flows at a freestream Mach number of 6 in a conventional wind tunnel and a shock tunnel. Schlieren imaging and pressure measurements are adopted to record unsteady flow features.Results indicate that trips with a 1 mm thickness prominently suppress external separations, shorten oscillatory cycles, and modify pressure magnitudes. Trips can reduce the upstream movement ranges of separated shocks from nose regions to locations axially 142 mm downstream. The oscillatory cycles are shortened from 3.75 ms to 3.25 ms and from 4 ms to 3.13 ms in two facilities.Tripped cases generally exhibit higher pressure magnitudes than those of untripped cases, of which the increment is up to 21 times the freestream static pressure for the farthest downstream transducer in the shock tunnel. The effects of trips are related to the streamwise vortexes in wake flows, in which interactions between external separations modify the separated flow patterns and enhance the sustainment of the forebody boundary layers to backpressure. Flow processes causing increments of oscillatory frequencies and pressure magnitudes are analyzed, while the flow mechanisms dominating the processes still need to be clarified in the future.
文摘In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribution measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators （VGs） is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate： （1） Compared with the baseline serpentine design without flow control, the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion （-↑△σ0） decreases from 11.7% to 2.3% by using the VGs. （2） With the descent of the free stream Mach number the total pressure loss decreases. However, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. （3） When Mao = 0.6-0.8, a = -4°-8° and β = 0°-6°, the total pressure recovery varies between 0.936 and 0. 961, the circular total pressure distortion coefficient varies between 1.4 % and 5.4 % and the synthesis distortion coefficient has a ranges from 3.8 % to 7.0 %. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.
文摘A three-part numerical investigation has been conducted in order to identify the flow separation behavior––the progression of the shock structure, the flow separation pattern with an increase in the nozzle pressure ratio（NPR）, the prediction of the separation data on the nozzle wall,and the influence of the gas density effect on the flow separation behavior are included.The computational results reveal that the annular conical aerospike nozzle is dominated by shock/shock and shock/boundary layer interactions at all calculated NPRs, and the shock physics and associated flow separation behavior are quite complex.An abnormal flow separation behavior as well as a transition process from no flow separation at highly over-expanded conditions to a restricted shock separation and finally to a free shock separation even at the deign condition can be observed.The complex shock physics has further influence on the separation data on both the spike and cowl walls, and separation criteria suggested by literatures developed from separation data in conical or bell-type rocket nozzles fail at the prediction of flow separation behavior in the present asymmetric supersonic nozzle.Correlation of flow separation with the gas density is distinct for highly overexpanded conditions.Decreasing the gas density or reducing mass flow results in a smaller adverse pressure gradient across the separation shock or a weaker shock system, and this is strongly coupled with the flow separation behavior.The computational results agree well with the experimental data in both shock physics and static wall pressure distribution at the specific NPRs, indicating that the computational methodology here is advisable to accurately predict the flow physics.
基金founded by National Natural Science Foundation of China under contract Nos. 51336011, 51276197, and 51207169
文摘A 15° swept wing with dielectric barrier discharge plasma actuator is designed. Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actua- tion frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.
文摘In the present study,special attention is paid to numerically investigate the aerodynamic performance of the NACA 0012 airfoil under rain and icing conditions with the aim to better understand the severe aerodynamic performance penalties of aircraft in flight.Furthermore,in order to control the flow separation and improve the aerodynamic performance of the airfoil under critical atmospheric conditions,the Gurney flap with different heights is attached to the trailing edge of the airfoil.The simulation is done at a Reynolds number of 3.1 × 105 under different atmospheric conditions including dry,rain,icing and coupling of rain and icing conditions.A two-way momentum coupled Eulerian-Lagrangian multiphase method is used to simulate the process of water film layer formed on the airfoil surface due to rainfall.According to the results,accumulation of water due to rainfall and ice accretion on the airfoil surface inevitably provides notable negative effects on the aerodynamic performance of the airfoil.It is concluded that icing induces a higher aerodynamic degradation than rain due to very intensive ice accretion.The Gurney flap as a passive flow control method with a favorable height for each condition is very beneficial.The maximum increment of the lift-to-drag ratio is achieved by Gurney Hap with a height of 0.01 of airfoil chord length for dry and rain conditions and 0.02 of airfoil chord length for icing and coupling of rain and icing conditions,respectively.
基金Supported by China Postdoctoral Science Foundation(Grant No.2016M600015)National Natural Science Foundation of China(Grant Nos.51741601,51236006)
文摘Boundary layer suction is an e ective method used to delay separations in axial compressors. Most studies on bound?ary layer suction have focused on improving the performance of compressors,whereas few studies investigated the influence on details of the flow fields,especially vortexes in compressors. CFD method is validated with experi?mental data firstly. Three single?slot and one double?slot endwall boundary layer suction schemes are designed and investigated. In addition to the investigation of aerodynamic performance of the cascades with and without suction,variations in corner open separation,passage vortex,and concentration shedding vortex,which are rarely seen for the flow controlled blades in published literatures,are analyzed. Then,flow models,which are the ultimate aim,of both baseline and aspirated cascades are established. Results show that single?slot endwall suction scheme adjacent to the suction surface can e ectively remove the corner open separation. With suction mass flow rate of 0.85%,the overall loss coe cient and endwall loss coe cient of the cascade are reduced by 25.2% and 48.6%,respectively. Besides,this scheme increases the static pressure rise coe cient of the cascade by 3.2% and the flow turning angle of up to 3.3° at 90% span. The concentration shedding vortex decreases,whereas the passage vortex increases. For single?slot suction schemes near the middle pitchwise of the passage,the concentration shedding vortex increases and the passage vortex is divided into two smaller passage vortexes,which converge into a single?passage vortex near the trailing edge section of the cascade. For the double?slot suction scheme,triple?passage vortexes are presented in the blade passage. Some new vortex structures are discovered,and the novel flow models of aspirated compressor cascade are proposed,which are important to improve the design of multi?stage aspirated compressors.
基金co-supported by University of Tehran and the Dana Research Laboratory of Amirkabir University of Technology in Iran
文摘Flow separation, as an aerodynamic phenomenon, occurs in specific conditions. The conditions are studied in a wind tunnel on different airfoils. The phenomenon can be delayed or suppressed by exerting an external momentum to the flow. Dielectric barrier discharge actuators arranged in a row of 8 and perpendicular to the flow direction can delay flow separation by exerting the momentum. In this study, a mathematical model is developed to predict a parameter, which is utilized to represent flow separation on an NACA0012 airfoil. The model is based on the neurofuzzy method applied to experimental datasets. The neuro model is trained in different flow conditions and the parameter is measured by pressure sensors.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51509178 and 51509177)the Natural Science Foundation of Tianjin City(Grant No.14JCYBJC22100)the Natural Science Foundation of Tianjin Education Commission(Grant No.2017KJ046)
文摘The interactions of cnoidal waves with a submerged quartercircular breakwater are investigated by a ReynoldsAveraged Navier–Stokes(RANS) flow solver with a Volume of Fluid(VOF) surface capturing scheme(RANSVOF) model. The vertical variation of the instantaneous velocity indicates that flow separation occurs at the boundary layer near the breakwater. The temporal evolution of the velocity and vorticity fields demonstrates vortex generation and shedding around the submerged quartercircular breakwater due to the flow separation. An empirical relationship between the vortex intensity and a few hydrodynamic parameters is proposed based on parametric analysis. In addition, the instantaneous and time-averaged vorticity fields reveal a pair of vortices of opposite signs at the breakwater which are expected to have significant effect on sediment entrainment, suspension, and transportation,therefore, scour on the leeside of the breakwater.
基金supported by Funding of Jiangsu Innovation Program for Graduate Education(No. KYLX16_0310)the Fundamental Research Funds for the Central Universities (No. NP2016406)+1 种基金supported by Graduate Innovation Center in NUAA (No. kfjj20170117)China Postdoctoral Science Foundation (No. 2017M610325)
文摘Dielectric barrier discharge （DBD） plasma is one of most promising flow control method for its several advantages. The present work investigates the control authority of nanosecond pulse DBD plasma actuators on a flying wing model＇s aerodynamic characteristics. The aerodynamic forces and moments are studied by means of experiment and numerical simulation. The numerical simulation results are in good agreement with experiment results. Both results indicate that the NS-DBD plasma actuators have negligible effect on aerodynamic forces and moment at the angles of attack smaller than 16-. However, significant changes can be achieved with actuation when the model＇s angle of attack is larger than 16° where the flow separation occurs. The spatial flow field structure results from numerical simulation suggest that the volumetric heat produced by NS-DBD plasma actuator changes the local temperature and density and induces several vortex structures, which strengthen the mixing of the shear layer with the main flow and delay separation or even reattach the separated flow.
基金the National Basic Research Program of China ("973" Project) (Grant No. 2009CB724104)
文摘Numerical studies of the flow past a circular cylinder at Reynolds number 1.4 × 105 and NACA0021 airfoil at the angle of attack 60° have been carried out by scale-adaptive simulation （SAS） and detached eddy simu- lation （DES）, in comparison with the existing experimental data. The new version of the model developed by Egorov and Menter is assessed, and advantages and disadvantages of the SAS simulation are analyzed in detail to provide guidance for industrial application in the future. Moreover, the mechanism of the scale-adaptive characteristics in separated regions is discussed, which is obscure in previous analyses. It is con- cluded that： the mean flow properties satisfactorily agree with the experimental results for the SAS simulation, although the prediction of the second order turbulent statistics in the near wake region is just reasonable. The SAS model can produce a larger magnitude of the turbulent kinetic energy in the recir- culation bubble, and, consequently, a smaller recirculation region and a more rapid recovery of the mean velocity out- side the recirculation region than the DES approach with the same grid resolution. The vortex shedding is slightly less irregular with the SAS model than with the DES approach, probably due to the higher dissipation of the SAS simulation under the condition of the coarse mesh.
基金This research was supported by the National Natural Science Foundation of China under Grant Nos.40405004 and 40233030.
文摘The questions on how vortices are constructed and on the relationship between the flow patterns and concentration distributions in real street canyons are the most pressing questions in pollution control studies. In this paper, the very large eddy simulation (VLES) and large eddy simulation (LES) are applied to calculate the flow and pollutant concentration fields in an urban street canyon and a cross-road respectively. It is found that the flow separations are not only related to the canyon aspect ratios, but also with the flow velocities and wall temperatures. And the turbulent dispersions are so strongly affected by the flow fields that the pollutant concentration distributions can be distinguished from the different aspect ratios, flow velocities and wall temperatures.
基金supported by the Fundamental Research Funds for the Central Universities of China(No.20720210050)the National Natural Science Foundation of China(No.51707169)+3 种基金the Natural Science Foundation of Fujian Province,China(No.2019J01042)the Aeronautical Power Fund Project,China(No.6141B09050390)the Project on the Integration of Industry,Education and Research of Aero Engine Corporation of China(No.HFZL2018CXY009)the Xiamen University Training Program of Innovation and Entrepreneurship for Undergraduates(No.202110384082)。
文摘Flow separation and secondary flow in the S-duct of an aircraft engine cause severe pressure loss and airflow distortion at the outlet,lowering engine performance.Herein,a serial two-electrode plasma synthetic jet(PSJ)actuator array is used to actively control the flow field in the duct and improve its characteristics.The results show that the PSJ significantly increases the wall pressure recovery coefficient,suppresses flow separation,and improves the outlet pressure distortion.The primary and secondary orders of the influencing factors are as follows:control position>jet momentum coefficient>excitation frequency>jet configuration.The best jet control position is near the separation location,and the best jet configuration is the‘Λ’configuration.The higher the jet momentum coefficient and excitation frequency,the better the flow control.The wall pressure coefficient increases by up to 127.8%,and the outlet steady pressure distortion index decreases by 9.15%.The control mechanism is the direct energy injection into the flow boundary layer through a high-speed jet and the indirect control effect of the induced streamwise vortex.On the one hand,the PSJ suppresses flow separation by improving the ability of the boundary layer to resist the inverse pressure gradient.On the other hand,it reduces pressure distortion by decreasing the intensity of the secondary flow and weakening the backflow.This study thus provides a new technology for the active control of the flow-field characteristics in an S-duct and has significance for guiding the application of synthetic jet technology in S-ducts.
基金the National Natural Science Foundation of China (19802018).
文摘The numerical investigation has been performed to explore the feasibility of vortex control by leading edge sucking excitation on a delta wing. The results reveal that the flow on the upper surface of the delta wing changes significantly in a wide range of the angle of attack. For the vortical flow at moderate angle of attack, the secondary and tertiary vortices are weakened or suppressed, and the total lift is almost unchanged. For the stalled flow at high angle of attack, the leading edge concentrated vortex is recovered, and the lift is enhanced with increasing suction rate. For the bluff-body flow at even high angles of attack, the lift can still be improved. The concentrated vortex disappears on the upper surface, and the load increment is nearly unchanged along the chordwise direction.
基金The project is supported by the National Natural Science Foundation of China
文摘In this paper a viscous-inviscid interacting flow theory(IFT)is developed for an incompressible, two-dimensional laminar flow.IFT's main points are as follows.(1)By introducing a concept of interaction lay- er where the normal momentum exchange is dominating,a new three layer structure is established.(2)Through the conventional manipulations and by introducing an interaction model,both the streamwise and normal length scales are proved to be functions of a single parameter m,which is related to the streamwise pressure gradient and Reynolds number.(3)The approximate equations governing the flow of each layer as well as the whole interaction flow are derived.The present IFT is applicable to both attached and attached-separation bubble-reattached flows, The classical boundary layer theory and Triple-deck theory are shown to be two special cases of the present theory under m=0 and 1/4,respectively.Furthermore IFT provides new distinctions of both the normal and streamwise length scales for flow-field numerical computation and also gives a new approach to developing the simpli- fied Navier-Stokes(SNS)equations.
基金supported by the National Natural Science Foundation of China(Nos.11372340 and 11732016)
文摘The present paper proposes a Lagrangian criterion of unsteady flow separation for two-dimensional periodic flows based on the principle of weighted averaging zero skin-friction given by Haller （HALLER, G. Exact theory of unsteady separation for two-dimensional flows. Journal of Fluid Mechanics, 512, 257-311 （2004））. By analyzing the distribution of the finite-time Lyapunov exponent （FTLE） along the no-slip wall, it can be found that the periodic separation takes place at the point of the zero FTLE. This new criterion is verified with an analytical solution of the separation bubble and a numerical simulation of lid-driven cavity flows.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11172326 and 11502280)
文摘The effects of the micro-ramps on supersonic turbulent flow over a forward-facing step（FFS） was experimentally investigated in a supersonic low-noise wind tunnel at Mach number 3 using nano-tracer planar laser scattering（NPLS）and particle image velocimetry（PIV） techniques. High spatiotemporal resolution images and velocity fields of supersonic flow over the testing model were captured. The fine structures and their spatial evolutionary characteristics without and with the micro-ramps were revealed and compared. The large-scale structures generated by the micro-ramps can survive the downstream FFS flowfield. The micro-ramps control on the flow separation and the separation shock unsteadiness was investigated by PIV results. With the micro-ramps, the reduction in the range of the reversal flow zone in streamwise direction is 50% and the turbulence intensity is also reduced. Moreover, the reduction in the average separated region and in separation shock unsteadiness are 47% and 26%, respectively. The results indicate that the micro-ramps are effective in reducing the flow separation and the separation shock unsteadiness.
基金This project is supported by National Natural Science Foundation of China (No.50275089)
文摘The influence of the structure and running parameters of a novel spiral oil wedge hybrid journal bearing on the fluid flow trace is investigated. The governing equation of the flow trace of lubricant is set up, and the simulation is carried out by using finite difference method. The results show that the lubricant flow status and end leakage quantity are greatly influenced by spiral angle,and that the rotating speed has little influence on the flow status. With advisable geometry design, the separation of lubricant between different oil wedges can be obtained, which can decrease the temperature rise effectively.
