Based on the computational fluid dynamics （CFD） method, a quenching tank with two agitator systems and two flow-equilibrating devices was selected to simulate flow distribution using Fluent software. A numerical exa...Based on the computational fluid dynamics （CFD） method, a quenching tank with two agitator systems and two flow-equilibrating devices was selected to simulate flow distribution using Fluent software. A numerical example was used to testify the validity of the quenching tank model. In order to take tank parameters （agitation speed, position of directional flow baffle and coordinate position in quench zone） into account, an approach that combines the artificial neural network （ANN） with CFD method was developed to study the flow distribution in the quenching tank. The flow rate of the quenching medium shows a very good agreement between the ANN predicted results and the Fluent simulated data. Methods for the optimal design of the quenching tank can be used as technical support for industrial production.展开更多
The flow distribution in quench tank for heat treatment of A357 alloy large complicated components was simulated using FLUENT computational fluid dynamics（CFD） software.The flow velocity and the uniformity of flow f...The flow distribution in quench tank for heat treatment of A357 alloy large complicated components was simulated using FLUENT computational fluid dynamics（CFD） software.The flow velocity and the uniformity of flow field in two types of quench tanks（with or without agitation system） were calculated.The results show that the flow field in the quench tank without agitation system has not evident regularity.While as for the quench tank with agitation system,the flow fields in different parameters have certain regularity.The agitation tanks have a distinct advantage over the system without agitation.Proper process parameters were also obtained.Finally,the tank model established in this work was testified by an example from publication.This model with high accuracy is able to optimize the tank structures and can be helpful for industrial production and theoretical investigation in the fields of heat treatment of large complicated components.展开更多
Flow distribution in branch piping system is affected by flow characteristics and different geometric variations. Most of the flow distribution studies are performed with one-dimensional analysis to yield overall info...Flow distribution in branch piping system is affected by flow characteristics and different geometric variations. Most of the flow distribution studies are performed with one-dimensional analysis to yield overall information only. However, detailed analysis is required to find effects of design parameters on the flow distribution. For this aspect, three-dimensional turbulent flow analysis was performed to assess turbulence model performance and effects of upstream pressure and branch pipe geometry. Three different turbulence models of standard k-e model, realizable k-e model and standard k-co yield similar results, indicating small effects of turbulence models on flow characteristics analysis. Geometric variations include area ratio of main and branch pipes, branch pipe diameter, and connection shape of main and branch pipes. Among these parameters, area ratio and branch diameter and shape show strong effect on flow distribution due to high friction and minor loss. Uniform flow distribution is one of common requirements in the branch piping system and this can be achieved with rather high total loss design.展开更多
A novel hood structure has been designed for the dust control system in the foundry in order to improve the working environment. A composite strategy has been applied for comparative analysis of the optimal venting vo...A novel hood structure has been designed for the dust control system in the foundry in order to improve the working environment. A composite strategy has been applied for comparative analysis of the optimal venting volume and the airflow distribution between the conventional hood and the novel one in this study. A Computational Fluid Dynamic (CFD) method is used to simulate the airflow fields and dust-polluted air moving paths. The CFD results show that a two-outlet hood, with one outlet located on the left of the hood, is better for improving dust-polluted air than the hood with one outlet only. It can be concluded that the number of the outlets as well as their location on the hood has a significant influence on the air flow pattern in the hood. The optimal venting volume is also a major consideration that is discussed in the study. The venting volume should be designed by considering both the effective level of air flow velocity around the dust source and the energy saving. The optimal airflow distribution may reduce the turbulence in the hood system.展开更多
The two-phase flow maldistribution phenomenon in microchannels with multi-parallel branches is inevitable in almost all common conditions,and not only affects the performance of the facility but also increases the ris...The two-phase flow maldistribution phenomenon in microchannels with multi-parallel branches is inevitable in almost all common conditions,and not only affects the performance of the facility but also increases the risk of system instability.In order to better understand the distribution mechanism and to explore a potential strategy to improve uniformity,the pressure evolutions under different split modes in a microchannel with multi-parallel branches,were analyzed numerically.The results show that the fluctuations of transient pressure exhibit similar trends at various split modes,but the time-averaged pressure drops in the branches are very different.This may be related to the maldistribution of mass flow.Thus,the outlet pressures of the branches are numerically changed to explore the relationship between differential pressure and flow distribution.From this study,the flow distribution is seen to display a strong sensitivity to the branch differential pressure.By changing the pressure conditions,the gas flow of the middle branch can be effectively prevented from the main channel,and the flow type in this branch turns from gas-liquid to a single liquid phase.When the differential pressure of the first branch channel changes,the maldistribution phenomenon of the model can be mitigated to a certain extent.Based on this,by adjusting the differential pressures of the second branch,the maldistribution phenomenon can be further mitigated,and the normalized standard deviation(NSTD)decreases from 0.52 to approximately 0.26.The results and conclusions are useful in understanding the two-phase flow distribution mechanism and for seeking optimizing strategies.展开更多
Traditional discharge measurements in ice-covered river channels are time-consuming and costly,thus limiting the elucidation of flow patterns during winter.This study proposes an analytical model for quantifying the t...Traditional discharge measurements in ice-covered river channels are time-consuming and costly,thus limiting the elucidation of flow patterns during winter.This study proposes an analytical model for quantifying the transverse distributions of the unit-width discharge and the depth-averaged streamwise velocity in ice-covered channels by extending an existing stream-tube method to include the effects of cover and bed roughness and cross-sectional geometry.A new set of equations are obtained for this extended method.An empirical coefficientαis included to lump the effects of the shape and friction factors of the ice cover and the channel bed.The model is compared with flume experiments and field data for fully and partially ice-covered flows to examine the variation of the coefficientα.展开更多
As a new method to cure acute respiratory distress syndrome （ARDS）, high blood pressure and some illnesses related to the lung, NO has recently received more attention. Thermal plasmas produced by arc discharge can ...As a new method to cure acute respiratory distress syndrome （ARDS）, high blood pressure and some illnesses related to the lung, NO has recently received more attention. Thermal plasmas produced by arc discharge can create medical NO, but the concentration of NO2 produced by arc discharge must be controlled simultaneously. This paper investigates the characteristics and regulations of NO production at different flow distribution by pulsed arc discharge in dry air with a special pulsed power, The experimental results show that the flow distribution has a considerable effect on the NO concentration, the stabilization of NO. The production of NO2 could be controlled and the ratio of NO2/NO was decreased to about 10% in the arc discharge. Therefore, the arc discharge could produce stable inhaled NO for medical treatment by changing the flow distribution.展开更多
Objective To investigate the flow distribution in plate fin heat exchangers and optimize the design of header configuration for plate fin heat exchangers. Methods A mathematical model of header was proposed. The e...Objective To investigate the flow distribution in plate fin heat exchangers and optimize the design of header configuration for plate fin heat exchangers. Methods A mathematical model of header was proposed. The effects of the header configuration on the flow distribution in plate fin heat exchangers were investigated by CFD. The second header configuration with a two stage distributing structure was brought forward to improve the performance of flow distribution. Results It is found that the flow maldistribution is very serious in the direction of header length for the conventional header used in industry. The numerical predictions indicate that the improved header configurations can effectively improve the performance of flow distribution in plate fin heat exchangers. Conclusion The numerical simulation confirms that CFD should be a suitable tool for predicting the flow distribution. The method has a wide variety of applications in the design of plate fin heat exchangers.展开更多
The application of the Genetic Algorithm （GA） for the influent flow optimized distribution in the four stage pilot plant of Step-Feed Biological Nutrient Removal （BNR） System was discussed. Under decided process p...The application of the Genetic Algorithm （GA） for the influent flow optimized distribution in the four stage pilot plant of Step-Feed Biological Nutrient Removal （BNR） System was discussed. Under decided process parameter and influent water conditions, the objective function of optimization was designed to minimize the difference between estimated and required effluent concentrations at the four stage pilot plant of Step-Feed BNR System, the optimized parameter for influent distribution ratios of the four stages is 37.2%, 27.4%, 23.2% and 12.2% respectively. According to the optimizations results and raw wastewater pilot-scale experiment, the average removal efficiencies for pollutants are higher.展开更多
This paper uses the Oseen transformation to solve the differential equations governing motion of the vertical linear gradient flow distribution close to a wall surface. The Navier-Stokes equations are used to consider...This paper uses the Oseen transformation to solve the differential equations governing motion of the vertical linear gradient flow distribution close to a wall surface. The Navier-Stokes equations are used to consider the inertia term along the flow direction. A novel contour integral method is used to solve the complex Airy function. The boundary conditions of linear gradient flow distribution for finite problems are determined. The vorticity function, the pressure function, and the turbulent velocity profiles are provided, and the stability of particle trajectories is studied. An Lx-function form of the third derivative circulation is used to to simplify the solution. Theoretical results are compared with the experimental measurements with satisfactory agreement.展开更多
In liquid rocket engines,regenerative cooling technology is essential for preserving structural integrity under extreme thermal loads.However,non-uniform coolant flow distribution within the cooling channels often lea...In liquid rocket engines,regenerative cooling technology is essential for preserving structural integrity under extreme thermal loads.However,non-uniform coolant flow distribution within the cooling channels often leads to localized overheating,posing serious risks to engine reliability and operational lifespan.This study employs a three-dimensional fluid–thermal coupled numerical model to systematically investigate the influence of geometric parameters-specifically the number of inlets,the number of channels,and inlet manifold configurations-on flow uniformity and thermal distribution in non-pyrolysis zones.Key findings reveal that increasing the number of inlets from one to three significantly enhances flow uniformity,reducing mass flow rate deviation from 1.2%to below 0.3%.However,further increasing the inlets to five yields only marginal improvements indicating diminishing(<0.1%),returns beyond three inlets.Additionally,temperature non-uniformity at the combustion chamber throat decreases by 37%-from 3050 K with 18 channels to 1915 K with 30 channels-highlighting the critical role of channel density in effective thermal regulation.Notably,while higher channel counts improve cooling efficiency,they also result in increased pressure losses of approximately 18%–22%,emphasizing the need to balance thermal performance against hydraulic resistance.An optimal configuration comprising 24 channels and three inlets was identified,providing minimal temperature gradients while maintaining acceptable pressure losses.The inlet manifold structure also plays a pivotal role in determining flow distribution.Configuration 3(Config-3),which features an enlarged manifold and reduced inlet velocity,achieves a 40%reduction in velocity fluctuations compared to Configuration 1(Config-1).This improvement leads to a more uniform mass flow distribution,with a relative standard deviation(RSD)of less than 0.15%.Furthermore,this design effectively mitigates localized hot spots near the nozzle-where temperature gradients are most severe-achieving a reduction of approximately 1135 K.展开更多
The distributed permutation flow shop scheduling problem(DPFSP)has received increasing attention in recent years.The iterated greedy algorithm(IGA)serves as a powerful optimizer for addressing such a problem because o...The distributed permutation flow shop scheduling problem(DPFSP)has received increasing attention in recent years.The iterated greedy algorithm(IGA)serves as a powerful optimizer for addressing such a problem because of its straightforward,single-solution evolution framework.However,a potential draw-back of IGA is the lack of utilization of historical information,which could lead to an imbalance between exploration and exploitation,especially in large-scale DPFSPs.As a consequence,this paper develops an IGA with memory and learning mechanisms(MLIGA)to efficiently solve the DPFSP targeted at the mini-malmakespan.InMLIGA,we incorporate a memory mechanism to make a more informed selection of the initial solution at each stage of the search,by extending,reconstructing,and reinforcing the information from previous solutions.In addition,we design a twolayer cooperative reinforcement learning approach to intelligently determine the key parameters of IGA and the operations of the memory mechanism.Meanwhile,to ensure that the experience generated by each perturbation operator is fully learned and to reduce the prior parameters of MLIGA,a probability curve-based acceptance criterion is proposed by combining a cube root function with custom rules.At last,a discrete adaptive learning rate is employed to enhance the stability of the memory and learningmechanisms.Complete ablation experiments are utilized to verify the effectiveness of the memory mechanism,and the results show that this mechanism is capable of improving the performance of IGA to a large extent.Furthermore,through comparative experiments involving MLIGA and five state-of-the-art algorithms on 720 benchmarks,we have discovered that MLI-GA demonstrates significant potential for solving large-scale DPFSPs.This indicates that MLIGA is well-suited for real-world distributed flow shop scheduling.展开更多
The prediction of flow distribution in flow manifolds is important for the design of heat exchangers. The pressure drop along the flow in the header is the most influential factor in flow distribution. Various continu...The prediction of flow distribution in flow manifolds is important for the design of heat exchangers. The pressure drop along the flow in the header is the most influential factor in flow distribution. Various continuous models available in literature have failed to satisfactorily predict the pressure distribution in the headers of the flow manifolds. In this article, a discrete model matching the real physical phenomena has been proposed, to predict the pressure distribution in headers. An experimental evaluation of relevant flow characteristic parameters has been carried out to support the discrete model calculations. The validity of the theoretical discrete model has been performed with experimental results, under specific conditions. Refined experimental probes, for pressure heads with ultrasonic measuring devices, have been used to obtain accurate results. The experimental results fully substantiate the soundness of the theoretical prediction. In addition, the advantage of the ability to accommodate local disturbances in the discrete model has been pointed out. The effect of some local disturbances may be substantial. As a result of the analysis presented in this article, improved designs of flow manifolds in heat exchangers can be realized, to assure operation safety under severe operating conditions.展开更多
Constructal approach is a recent concept allowing to generate and optimize multi-scale structures, in particular, branching structures, connecting a microscopic world to a macroscopic one, from an engineer＇s point of...Constructal approach is a recent concept allowing to generate and optimize multi-scale structures, in particular, branching structures, connecting a microscopic world to a macroscopic one, from an engineer＇s point of view. Branching morphologies are found in many types of natural phenomena, and may be associated to some kind of optimization, expressing the evolutionary adaptation of natural systems to their environment, In a sense, the constructal approach tries to imitate this morphogenesis while short-cutting the trial-and-error of nature. The basic ideas underlying the constructal concept and methodology are illustrated here by the examples of fluid distribution to a multi-channel reactor, and of the design of a porous material and system for gas adsorption and storage. In usual constructal theory, a tree branching is postulated for the channels or flow-paths or conductors, usually a dichotomic tree （every branch is divided into two ＂daughters＂）. The objective function of the optimization is built from the resistances to mass or heat transport, expressed here as ＂characteristic transport times＂, and the geometric result is expressed as a shape factor of a domain. The optimized shape expresses the compromise between the mass or heat transport characteristics at adjacent scales. Under suitable assumptions, simple analytical scaling laws are found, which relate the geometric and transport properties of different scales. Some challenging geometric problems may arise when applying the constructal approach to practical situations where strong geometric constraints exist. The search for analytical solutions imposes simplifying assumptions which may be at fault, calling for less constraining approaches, for example making only weak assumptions on the branching structure. Some of these challenges are brought forward along this text.展开更多
The flow maldistribution and the effect of different inlet configuration on the flow distribution in platefin heat exchangers were studied experimentally. It is found that the flow maldistribution is serious because o...The flow maldistribution and the effect of different inlet configuration on the flow distribution in platefin heat exchangers were studied experimentally. It is found that the flow maldistribution is serious because of the defects of inlet configurations, while the inlet configuration and Reynolds number are the main factors affecting the flow distribution. The improved inlet configurations, which are the header with a two-stage distributing configuration and the guide vane with a fluid complementary cavity were proposed and tested in this paper. The experimental results show that the improved inlet configurations can effectively improve the performance of flow distribution in heat exchangers.展开更多
Flow distribution headers play a major role in heat exchangers.The selection of header diameter,branch pipe diameter,branch pipe spacing etc.is based on the designer＇s experience and general guide lines.The proper se...Flow distribution headers play a major role in heat exchangers.The selection of header diameter,branch pipe diameter,branch pipe spacing etc.is based on the designer＇s experience and general guide lines.The proper selection of the header dimensions will yield uniform flow distribution in heat exchangers,which in turn will enhance the heat exchanger efficiency.In this work,the flow distribution in branch pipes and the pressure variation across the branch pipes in laminar and low turbulence region is studied with two models of the inlet dividing headers.When the numerical analysis has been applied,its inability to predict the no flow condition through the branch pipes is revealed.The results are presented in the form of flow rate ratio through branch pipes and nondimensional coefficients across branch pipes which are useful to apply the existing mathematical models for the present experimental setup.展开更多
In a schedule-based rail transit system,passenger route choices are affected by train delays,and,consequently,the relevant passenger flow distribution of the network will differ from the normal state.In this paper,a p...In a schedule-based rail transit system,passenger route choices are affected by train delays,and,consequently,the relevant passenger flow distribution of the network will differ from the normal state.In this paper,a passenger's alternative choices,such as selecting another route,waiting,and switching to other transportation modes,and the corresponding influence mechanism are analyzed in detail.Given train time-space diagrams and the time-varying travel demands between the origin and destination(O-D),a dynamic simulation model of passenger flow distribution on schedule-based transit networks with train delays is proposed.Animation demonstration and statistical indices,including the passenger flow volume of each train and station,can be generated from simulation results.A numerical example is given to illustrate the application of the proposed model.Nu-merical results indicate that,compared with conventional methods,the proposed model performs better for a passenger flow distribution with train delays.展开更多
An analytical method is presented, which enables the non-uniform velocity and pressure distributions at the impeller inlet of a pump to be accurately computed. The analyses are based on the potential flow theory and t...An analytical method is presented, which enables the non-uniform velocity and pressure distributions at the impeller inlet of a pump to be accurately computed. The analyses are based on the potential flow theory and the geometrical similarity of the streamline distribution along the leading edge of the impeller blades. The method is thus called streamline similarity method（SSM）. The obtained geometrical form of the flow distribution is then simply described by the geometrical variable G（s） and the first structural constant G_Ⅰ. As clearly demonstrated and also validated by experiments, both the flow velocity and the pressure distributions at the impeller inlet are usually highly non-uniform. This knowledge is indispensible for impeller blade designs to fulfill the shockless inlet flow condition. By introducing the second structural constant G_Ⅱ, the paper also presents the simple and accurate computation of the shock loss, which occurs at the impeller inlet. The introduction of two structural constants contributes immensely to the enhancement of the computational accuracies. As further indicated, all computations presented in this paper can also be well applied to the non-uniform exit flow out of an impeller of the Francis turbine for accurately computing the related mean values.展开更多
Pilot two-stage proportional valves are widely used in high-power hydraulic systems. For the purpose of improving the dynamic performance, reliability, and digitization of the traditional proportional valve, a novel t...Pilot two-stage proportional valves are widely used in high-power hydraulic systems. For the purpose of improving the dynamic performance, reliability, and digitization of the traditional proportional valve, a novel two-stage proportional valve with a pilot digital flow distribution is proposed from the viewpoint of the dual nozzle-flapper valve’s working principle. In particular, the dual nozzle-flapper is decoupled by two high-speed on/off valves (HSVs). First, the working principle and mathematical model of the proposed valve are determined. Then, the influences of the control parameters (duty cycle and switching frequency) and structural parameters (fixed orifice’s diameter and main valve’s spring) on the main valve’s motion are analyzed on the basis of theory, simulation, and experiment. In addition, in optimizing the value of the fixed orifice’s diameter, a new design criterion that considers the maximum pressure sensitivity, flow controllability, and flow linearization is proposed to improve the balance between the effective displacement and the displacement fluctuation of the main valve. The new scheme is verified by simulations and experiments. Experimental results of the closed-loop displacement tracking have demonstrated that the delay time of the main valve is always within 3.5 ms under different working conditions, and the tracking error can be significantly reduced using the higher switching frequency. The amplitude–frequency experiments indicate that a −3 dB-frequency of the proposed valve can reach 9.5 Hz in the case of ±50% full scale and 15 Hz in the case of 0%–50% full scale. The values can be further improved by increasing the flow rate of the pilot HSV.展开更多
New design of plain flow distributor of the radial piston low speed hydraulic motor is presented. On the basis of analyzing its static mathematic model and structural optimization, the kinetic characteristics of the d...New design of plain flow distributor of the radial piston low speed hydraulic motor is presented. On the basis of analyzing its static mathematic model and structural optimization, the kinetic characteristics of the distribution plates and the oil film between them are discussed in detail.展开更多
文摘Based on the computational fluid dynamics （CFD） method, a quenching tank with two agitator systems and two flow-equilibrating devices was selected to simulate flow distribution using Fluent software. A numerical example was used to testify the validity of the quenching tank model. In order to take tank parameters （agitation speed, position of directional flow baffle and coordinate position in quench zone） into account, an approach that combines the artificial neural network （ANN） with CFD method was developed to study the flow distribution in the quenching tank. The flow rate of the quenching medium shows a very good agreement between the ANN predicted results and the Fluent simulated data. Methods for the optimal design of the quenching tank can be used as technical support for industrial production.
基金Project(51405389)supported by the National Natural Science Foundation of ChinaProject(2014003)supported by the Shanghai Key Laboratory of Digital Manufacture for Thin-walled Structures,China+1 种基金Project(3102015ZY024)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(108-QP-2014)supported by the Research Fund of the State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,China
文摘The flow distribution in quench tank for heat treatment of A357 alloy large complicated components was simulated using FLUENT computational fluid dynamics（CFD） software.The flow velocity and the uniformity of flow field in two types of quench tanks（with or without agitation system） were calculated.The results show that the flow field in the quench tank without agitation system has not evident regularity.While as for the quench tank with agitation system,the flow fields in different parameters have certain regularity.The agitation tanks have a distinct advantage over the system without agitation.Proper process parameters were also obtained.Finally,the tank model established in this work was testified by an example from publication.This model with high accuracy is able to optimize the tank structures and can be helpful for industrial production and theoretical investigation in the fields of heat treatment of large complicated components.
基金Project supported by Changwon National University in 2010
文摘Flow distribution in branch piping system is affected by flow characteristics and different geometric variations. Most of the flow distribution studies are performed with one-dimensional analysis to yield overall information only. However, detailed analysis is required to find effects of design parameters on the flow distribution. For this aspect, three-dimensional turbulent flow analysis was performed to assess turbulence model performance and effects of upstream pressure and branch pipe geometry. Three different turbulence models of standard k-e model, realizable k-e model and standard k-co yield similar results, indicating small effects of turbulence models on flow characteristics analysis. Geometric variations include area ratio of main and branch pipes, branch pipe diameter, and connection shape of main and branch pipes. Among these parameters, area ratio and branch diameter and shape show strong effect on flow distribution due to high friction and minor loss. Uniform flow distribution is one of common requirements in the branch piping system and this can be achieved with rather high total loss design.
基金supported by the Shanghai Leading Academic Discipline Project(B604)the Henan Science and Technology Breakthrough Major Project(102102210440)+1 种基金the High School Funding Scheme for Key Young Teachersthe Education Department of Henan Province,2010
文摘A novel hood structure has been designed for the dust control system in the foundry in order to improve the working environment. A composite strategy has been applied for comparative analysis of the optimal venting volume and the airflow distribution between the conventional hood and the novel one in this study. A Computational Fluid Dynamic (CFD) method is used to simulate the airflow fields and dust-polluted air moving paths. The CFD results show that a two-outlet hood, with one outlet located on the left of the hood, is better for improving dust-polluted air than the hood with one outlet only. It can be concluded that the number of the outlets as well as their location on the hood has a significant influence on the air flow pattern in the hood. The optimal venting volume is also a major consideration that is discussed in the study. The venting volume should be designed by considering both the effective level of air flow velocity around the dust source and the energy saving. The optimal airflow distribution may reduce the turbulence in the hood system.
基金This work is supported by the National Natural Science Foundation of China(No.51976181).
文摘The two-phase flow maldistribution phenomenon in microchannels with multi-parallel branches is inevitable in almost all common conditions,and not only affects the performance of the facility but also increases the risk of system instability.In order to better understand the distribution mechanism and to explore a potential strategy to improve uniformity,the pressure evolutions under different split modes in a microchannel with multi-parallel branches,were analyzed numerically.The results show that the fluctuations of transient pressure exhibit similar trends at various split modes,but the time-averaged pressure drops in the branches are very different.This may be related to the maldistribution of mass flow.Thus,the outlet pressures of the branches are numerically changed to explore the relationship between differential pressure and flow distribution.From this study,the flow distribution is seen to display a strong sensitivity to the branch differential pressure.By changing the pressure conditions,the gas flow of the middle branch can be effectively prevented from the main channel,and the flow type in this branch turns from gas-liquid to a single liquid phase.When the differential pressure of the first branch channel changes,the maldistribution phenomenon of the model can be mitigated to a certain extent.Based on this,by adjusting the differential pressures of the second branch,the maldistribution phenomenon can be further mitigated,and the normalized standard deviation(NSTD)decreases from 0.52 to approximately 0.26.The results and conclusions are useful in understanding the two-phase flow distribution mechanism and for seeking optimizing strategies.
基金National Key Research&Development Plan of China(2022YFC3202500)National Natural Science Foundation of China(U2243221,51979291,52009144)+1 种基金WHR Research&Development Support Program(HY0145B032021,HY110145B001021)State Key Laboratory of SRWCRB Support Program of China(SKL2022TS04).
文摘Traditional discharge measurements in ice-covered river channels are time-consuming and costly,thus limiting the elucidation of flow patterns during winter.This study proposes an analytical model for quantifying the transverse distributions of the unit-width discharge and the depth-averaged streamwise velocity in ice-covered channels by extending an existing stream-tube method to include the effects of cover and bed roughness and cross-sectional geometry.A new set of equations are obtained for this extended method.An empirical coefficientαis included to lump the effects of the shape and friction factors of the ice cover and the channel bed.The model is compared with flume experiments and field data for fully and partially ice-covered flows to examine the variation of the coefficientα.
基金National Natural Science Foundation of China (Nos.50677026 and 50347009)the National Key Technologies R&D Program Special Foundation of China (No.2003A12)
文摘As a new method to cure acute respiratory distress syndrome （ARDS）, high blood pressure and some illnesses related to the lung, NO has recently received more attention. Thermal plasmas produced by arc discharge can create medical NO, but the concentration of NO2 produced by arc discharge must be controlled simultaneously. This paper investigates the characteristics and regulations of NO production at different flow distribution by pulsed arc discharge in dry air with a special pulsed power, The experimental results show that the flow distribution has a considerable effect on the NO concentration, the stabilization of NO. The production of NO2 could be controlled and the ratio of NO2/NO was decreased to about 10% in the arc discharge. Therefore, the arc discharge could produce stable inhaled NO for medical treatment by changing the flow distribution.
文摘Objective To investigate the flow distribution in plate fin heat exchangers and optimize the design of header configuration for plate fin heat exchangers. Methods A mathematical model of header was proposed. The effects of the header configuration on the flow distribution in plate fin heat exchangers were investigated by CFD. The second header configuration with a two stage distributing structure was brought forward to improve the performance of flow distribution. Results It is found that the flow maldistribution is very serious in the direction of header length for the conventional header used in industry. The numerical predictions indicate that the improved header configurations can effectively improve the performance of flow distribution in plate fin heat exchangers. Conclusion The numerical simulation confirms that CFD should be a suitable tool for predicting the flow distribution. The method has a wide variety of applications in the design of plate fin heat exchangers.
文摘The application of the Genetic Algorithm （GA） for the influent flow optimized distribution in the four stage pilot plant of Step-Feed Biological Nutrient Removal （BNR） System was discussed. Under decided process parameter and influent water conditions, the objective function of optimization was designed to minimize the difference between estimated and required effluent concentrations at the four stage pilot plant of Step-Feed BNR System, the optimized parameter for influent distribution ratios of the four stages is 37.2%, 27.4%, 23.2% and 12.2% respectively. According to the optimizations results and raw wastewater pilot-scale experiment, the average removal efficiencies for pollutants are higher.
基金Project supported by the National Natural Science foundation of China(No.51079095)the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(No.51021004)
文摘This paper uses the Oseen transformation to solve the differential equations governing motion of the vertical linear gradient flow distribution close to a wall surface. The Navier-Stokes equations are used to consider the inertia term along the flow direction. A novel contour integral method is used to solve the complex Airy function. The boundary conditions of linear gradient flow distribution for finite problems are determined. The vorticity function, the pressure function, and the turbulent velocity profiles are provided, and the stability of particle trajectories is studied. An Lx-function form of the third derivative circulation is used to to simplify the solution. Theoretical results are compared with the experimental measurements with satisfactory agreement.
基金supported by the Key project of Hunan Provincial Education Department(Grant Number:22A0485)The Natural Science Foundation of Hunan(Grant Number:2024JJ5293)The Key project of Hunan University of Arts and Science(Grant Number:23ZZ08).
文摘In liquid rocket engines,regenerative cooling technology is essential for preserving structural integrity under extreme thermal loads.However,non-uniform coolant flow distribution within the cooling channels often leads to localized overheating,posing serious risks to engine reliability and operational lifespan.This study employs a three-dimensional fluid–thermal coupled numerical model to systematically investigate the influence of geometric parameters-specifically the number of inlets,the number of channels,and inlet manifold configurations-on flow uniformity and thermal distribution in non-pyrolysis zones.Key findings reveal that increasing the number of inlets from one to three significantly enhances flow uniformity,reducing mass flow rate deviation from 1.2%to below 0.3%.However,further increasing the inlets to five yields only marginal improvements indicating diminishing(<0.1%),returns beyond three inlets.Additionally,temperature non-uniformity at the combustion chamber throat decreases by 37%-from 3050 K with 18 channels to 1915 K with 30 channels-highlighting the critical role of channel density in effective thermal regulation.Notably,while higher channel counts improve cooling efficiency,they also result in increased pressure losses of approximately 18%–22%,emphasizing the need to balance thermal performance against hydraulic resistance.An optimal configuration comprising 24 channels and three inlets was identified,providing minimal temperature gradients while maintaining acceptable pressure losses.The inlet manifold structure also plays a pivotal role in determining flow distribution.Configuration 3(Config-3),which features an enlarged manifold and reduced inlet velocity,achieves a 40%reduction in velocity fluctuations compared to Configuration 1(Config-1).This improvement leads to a more uniform mass flow distribution,with a relative standard deviation(RSD)of less than 0.15%.Furthermore,this design effectively mitigates localized hot spots near the nozzle-where temperature gradients are most severe-achieving a reduction of approximately 1135 K.
基金supported in part by the National Key Research and Development Program of China under Grant No.2021YFF0901300in part by the National Natural Science Foundation of China under Grant Nos.62173076 and 72271048.
文摘The distributed permutation flow shop scheduling problem(DPFSP)has received increasing attention in recent years.The iterated greedy algorithm(IGA)serves as a powerful optimizer for addressing such a problem because of its straightforward,single-solution evolution framework.However,a potential draw-back of IGA is the lack of utilization of historical information,which could lead to an imbalance between exploration and exploitation,especially in large-scale DPFSPs.As a consequence,this paper develops an IGA with memory and learning mechanisms(MLIGA)to efficiently solve the DPFSP targeted at the mini-malmakespan.InMLIGA,we incorporate a memory mechanism to make a more informed selection of the initial solution at each stage of the search,by extending,reconstructing,and reinforcing the information from previous solutions.In addition,we design a twolayer cooperative reinforcement learning approach to intelligently determine the key parameters of IGA and the operations of the memory mechanism.Meanwhile,to ensure that the experience generated by each perturbation operator is fully learned and to reduce the prior parameters of MLIGA,a probability curve-based acceptance criterion is proposed by combining a cube root function with custom rules.At last,a discrete adaptive learning rate is employed to enhance the stability of the memory and learningmechanisms.Complete ablation experiments are utilized to verify the effectiveness of the memory mechanism,and the results show that this mechanism is capable of improving the performance of IGA to a large extent.Furthermore,through comparative experiments involving MLIGA and five state-of-the-art algorithms on 720 benchmarks,we have discovered that MLI-GA demonstrates significant potential for solving large-scale DPFSPs.This indicates that MLIGA is well-suited for real-world distributed flow shop scheduling.
文摘The prediction of flow distribution in flow manifolds is important for the design of heat exchangers. The pressure drop along the flow in the header is the most influential factor in flow distribution. Various continuous models available in literature have failed to satisfactorily predict the pressure distribution in the headers of the flow manifolds. In this article, a discrete model matching the real physical phenomena has been proposed, to predict the pressure distribution in headers. An experimental evaluation of relevant flow characteristic parameters has been carried out to support the discrete model calculations. The validity of the theoretical discrete model has been performed with experimental results, under specific conditions. Refined experimental probes, for pressure heads with ultrasonic measuring devices, have been used to obtain accurate results. The experimental results fully substantiate the soundness of the theoretical prediction. In addition, the advantage of the ability to accommodate local disturbances in the discrete model has been pointed out. The effect of some local disturbances may be substantial. As a result of the analysis presented in this article, improved designs of flow manifolds in heat exchangers can be realized, to assure operation safety under severe operating conditions.
文摘Constructal approach is a recent concept allowing to generate and optimize multi-scale structures, in particular, branching structures, connecting a microscopic world to a macroscopic one, from an engineer＇s point of view. Branching morphologies are found in many types of natural phenomena, and may be associated to some kind of optimization, expressing the evolutionary adaptation of natural systems to their environment, In a sense, the constructal approach tries to imitate this morphogenesis while short-cutting the trial-and-error of nature. The basic ideas underlying the constructal concept and methodology are illustrated here by the examples of fluid distribution to a multi-channel reactor, and of the design of a porous material and system for gas adsorption and storage. In usual constructal theory, a tree branching is postulated for the channels or flow-paths or conductors, usually a dichotomic tree （every branch is divided into two ＂daughters＂）. The objective function of the optimization is built from the resistances to mass or heat transport, expressed here as ＂characteristic transport times＂, and the geometric result is expressed as a shape factor of a domain. The optimized shape expresses the compromise between the mass or heat transport characteristics at adjacent scales. Under suitable assumptions, simple analytical scaling laws are found, which relate the geometric and transport properties of different scales. Some challenging geometric problems may arise when applying the constructal approach to practical situations where strong geometric constraints exist. The search for analytical solutions imposes simplifying assumptions which may be at fault, calling for less constraining approaches, for example making only weak assumptions on the branching structure. Some of these challenges are brought forward along this text.
基金Supported by the Doctoral Foundation of Xi'an Jiaotong University (No. DFXJTU2002-12) the Foundation for Excellent Doctoral Dissertation Author by Minister of Education, China (No. 199933).
文摘The flow maldistribution and the effect of different inlet configuration on the flow distribution in platefin heat exchangers were studied experimentally. It is found that the flow maldistribution is serious because of the defects of inlet configurations, while the inlet configuration and Reynolds number are the main factors affecting the flow distribution. The improved inlet configurations, which are the header with a two-stage distributing configuration and the guide vane with a fluid complementary cavity were proposed and tested in this paper. The experimental results show that the improved inlet configurations can effectively improve the performance of flow distribution in heat exchangers.
文摘Flow distribution headers play a major role in heat exchangers.The selection of header diameter,branch pipe diameter,branch pipe spacing etc.is based on the designer＇s experience and general guide lines.The proper selection of the header dimensions will yield uniform flow distribution in heat exchangers,which in turn will enhance the heat exchanger efficiency.In this work,the flow distribution in branch pipes and the pressure variation across the branch pipes in laminar and low turbulence region is studied with two models of the inlet dividing headers.When the numerical analysis has been applied,its inability to predict the no flow condition through the branch pipes is revealed.The results are presented in the form of flow rate ratio through branch pipes and nondimensional coefficients across branch pipes which are useful to apply the existing mathematical models for the present experimental setup.
基金Financial supporters of this study include the National Natural Science Foundation of China(Project No.71271153)Program for Young Excellent Talents at Tongji University(ProjectNo.2014KJ015)+1 种基金Shanghai Philosophy and Social Science Funds (2015EGL006)Fundamental Research Funds for the Central Universities of China(1600219249)
文摘In a schedule-based rail transit system,passenger route choices are affected by train delays,and,consequently,the relevant passenger flow distribution of the network will differ from the normal state.In this paper,a passenger's alternative choices,such as selecting another route,waiting,and switching to other transportation modes,and the corresponding influence mechanism are analyzed in detail.Given train time-space diagrams and the time-varying travel demands between the origin and destination(O-D),a dynamic simulation model of passenger flow distribution on schedule-based transit networks with train delays is proposed.Animation demonstration and statistical indices,including the passenger flow volume of each train and station,can be generated from simulation results.A numerical example is given to illustrate the application of the proposed model.Nu-merical results indicate that,compared with conventional methods,the proposed model performs better for a passenger flow distribution with train delays.
文摘An analytical method is presented, which enables the non-uniform velocity and pressure distributions at the impeller inlet of a pump to be accurately computed. The analyses are based on the potential flow theory and the geometrical similarity of the streamline distribution along the leading edge of the impeller blades. The method is thus called streamline similarity method（SSM）. The obtained geometrical form of the flow distribution is then simply described by the geometrical variable G（s） and the first structural constant G_Ⅰ. As clearly demonstrated and also validated by experiments, both the flow velocity and the pressure distributions at the impeller inlet are usually highly non-uniform. This knowledge is indispensible for impeller blade designs to fulfill the shockless inlet flow condition. By introducing the second structural constant G_Ⅱ, the paper also presents the simple and accurate computation of the shock loss, which occurs at the impeller inlet. The introduction of two structural constants contributes immensely to the enhancement of the computational accuracies. As further indicated, all computations presented in this paper can also be well applied to the non-uniform exit flow out of an impeller of the Francis turbine for accurately computing the related mean values.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51975275)the National Key Laboratory of Science and Technology on Helicopter Transmission(Nanjing University of Aeronautics and Astronautics),China(Grant No.HTL-A-20G02)the Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(Grant No.KYCX200178).
文摘Pilot two-stage proportional valves are widely used in high-power hydraulic systems. For the purpose of improving the dynamic performance, reliability, and digitization of the traditional proportional valve, a novel two-stage proportional valve with a pilot digital flow distribution is proposed from the viewpoint of the dual nozzle-flapper valve’s working principle. In particular, the dual nozzle-flapper is decoupled by two high-speed on/off valves (HSVs). First, the working principle and mathematical model of the proposed valve are determined. Then, the influences of the control parameters (duty cycle and switching frequency) and structural parameters (fixed orifice’s diameter and main valve’s spring) on the main valve’s motion are analyzed on the basis of theory, simulation, and experiment. In addition, in optimizing the value of the fixed orifice’s diameter, a new design criterion that considers the maximum pressure sensitivity, flow controllability, and flow linearization is proposed to improve the balance between the effective displacement and the displacement fluctuation of the main valve. The new scheme is verified by simulations and experiments. Experimental results of the closed-loop displacement tracking have demonstrated that the delay time of the main valve is always within 3.5 ms under different working conditions, and the tracking error can be significantly reduced using the higher switching frequency. The amplitude–frequency experiments indicate that a −3 dB-frequency of the proposed valve can reach 9.5 Hz in the case of ±50% full scale and 15 Hz in the case of 0%–50% full scale. The values can be further improved by increasing the flow rate of the pilot HSV.
文摘New design of plain flow distributor of the radial piston low speed hydraulic motor is presented. On the basis of analyzing its static mathematic model and structural optimization, the kinetic characteristics of the distribution plates and the oil film between them are discussed in detail.
