A sand sample collected at the foot of Flaming Mountain was studied further. On the basis of the change in the relative intensity after heat treatment, one of the sextets observed in its Mossbauer spectrum at liquid n...A sand sample collected at the foot of Flaming Mountain was studied further. On the basis of the change in the relative intensity after heat treatment, one of the sextets observed in its Mossbauer spectrum at liquid nitrogen temperature was ascribed to goethite. This result provides a useful information on the geological history of the region where the mountain is located.展开更多
To study the effects of different proportions of aluminum hydroxide and expandable graphite （EG） composites on flame retardation, sealing, mechanical, electrical and other properties of RTV- 1, aluminum hydroxide/ex...To study the effects of different proportions of aluminum hydroxide and expandable graphite （EG） composites on flame retardation, sealing, mechanical, electrical and other properties of RTV- 1, aluminum hydroxide/expandable graphite （ATH/EG） and silicone rubber composites were prepared by the compression molding method. The experimental results show that heat resistance improves with the increase of proportion of EG. Although the resistance coefficient changes, the composite materials still keep good electrical insulating property. Moreover, oxygen index and expansion index rise first then fall. When ATH/EG is 1：1, the oxygen index reaches the highest; the mechanical property of the silicone rubber is not affected under various environments such as acid, alkali, oily, artificial sea water environments, etc.展开更多
The partial oxidation of hydrocarbons is an important technical route to produce acetylene for chemical industry.The partial oxidation reactor is the key to high acetylene yields.This work is an experimental and numer...The partial oxidation of hydrocarbons is an important technical route to produce acetylene for chemical industry.The partial oxidation reactor is the key to high acetylene yields.This work is an experimental and numerical study on the use of a methane flame to produce acetylene.A lab scale partial oxidation reactor was used to produce ultra fuel-rich premixed jet flames.The axial temperature and species concentration profiles were measured for different equivalence ratios and preheating temperatures,and these were compared to numerical results from Computational Fluid Dynamics(CFD)simulations that used the Reynolds Averaged Navier-Stokes Probability Density Function(RANS-PDF)approach coupled with detailed chemical mechanisms.The Leeds 1.5,GRI 3.0 and San Diego mechanisms were used to investigate the effect of the detailed chemical mechanisms.The effects of equivalence ratio and preheating temperature on acetylene production were experimentally and numerically studied.The experimental validations indicated that the present numerical simulation provided reliable prediction on the partial oxidation of methane.Using this simulation method the optimal equivalence ratio for acetylene production was determined to be 3.6.Increasing preheating temperature improved acetylene production and shortened greatly the ignition delay time.So the increase of preheating temperature had to be limited to avoid uncontrolled ignition in the mixing chamber and the pyrolysis of methane in the preheater.展开更多
By combining the merits of radiative cooling(RC)and evaporation cooling(EC),radiative coupled evaporative cooling(REC)has attracted considerable attention for sub-ambient cooling purposes.However,for outdoor devices,t...By combining the merits of radiative cooling(RC)and evaporation cooling(EC),radiative coupled evaporative cooling(REC)has attracted considerable attention for sub-ambient cooling purposes.However,for outdoor devices,the interior heating power would increase the working temperature and fire risk,which would suppress their above-ambient heat dissipation capabilities and passive water cycle properties.In this work,we introduced a REC design based on an all-in-one photonic hydrogel for above-ambient heat dissipation and flame retardancy.Unlike conventional design RC film for heat dissipation with limited cooling power and fire risk,REC hydrogel can greatly improve the heat dissipation performance in the daytime with a high workload,indicating a 12.0℃lower temperature than the RC film under the same conditions in the outdoor experiment.In the nighttime with a low workload,RC-assisted adsorption can improve atmospheric water harvesting to ensure EC in the daytime.In addition,our REC hydrogel significantly enhanced flame retardancy by absorbing heat without a corresponding temperature rise,thus mitigating fire risks.Thus,our design shows a promising solution for the thermal management of outdoor devices,delivering outstanding performance in both heat dissipation and flame retardancy.展开更多
In this study,a facile and environmentally friendly method with low energy consumption for preparing nanoscale AgCl and BaSO4 co-precipitates(AgCl@BaSO_(4) co-precipitates)was developed based on the metathetical react...In this study,a facile and environmentally friendly method with low energy consumption for preparing nanoscale AgCl and BaSO4 co-precipitates(AgCl@BaSO_(4) co-precipitates)was developed based on the metathetical reaction.Then,the dried co-precipitates were melt-compounded with polyamide 6(PA6)resins at a specified mass ratio in a twin-screw extruder.The results demonstrated that in the absence of any coating agent or carrier,the nanoparticles of AgCl@BaSO_(4) co-precipitates were homogeneously dispersed in the PA6 matrix.Further analysis showed that after the addition of AgCl@BaSO_(4) co-precipitates,the antibacterial performance,along with the flame-retardance and anti-dripping characteristics of PA6,was enhanced significantly.In addition,the PA6 composites possessed high spinnability in producing pre-oriented yarn.展开更多
High-performance MXene-based polymer nanocomposites are well-suited for various industrial applications owing to their excellent mechanical,thermal,and other properties.However,the fabrication of flame-retardant polym...High-performance MXene-based polymer nanocomposites are well-suited for various industrial applications owing to their excellent mechanical,thermal,and other properties.However,the fabrication of flame-retardant polymer/MXene nanocom-posites remains challenging owing to the limited flame-retardant properties of MXene itself.This study prepared a novel MXene@Ag@PA hybrid material via radiation modification and complexation reaction.This material was used to further enhance the key properties of ethylene-vinyl acetate(EVA),such as its mechanical properties,thermal conductivity,flame retardancy,and electromagnetic shielding.The addition of two parts of this hybrid material increased the thermal conduc-tivity of EVA by 44.2%and reduced its peak exothermic rate during combustion by 30.1%compared with pure EVA.The material also significantly reduced smoke production and increased the residue content.In the X-band,the electromagnetic shielding effectiveness of the EVA composites reached 20 dB.Moreover,the MXene@Ag@PA hybrid material could be used to further enhance the mechanical properties of EVA composites under electron-beam irradiation.Thus,this study contributes to the development of MXene-based EVA advanced materials that are fire-safe,have high strength,and exhibit good electromagnetic shielding performance for various applications.展开更多
In recent decades,annual urban fire incidents,including those involving ancient wooden buildings burned,transportation,and solar panels,have increased,leading to significant loss of human life and property.Addressing ...In recent decades,annual urban fire incidents,including those involving ancient wooden buildings burned,transportation,and solar panels,have increased,leading to significant loss of human life and property.Addressing this issue without altering the surface morphology or interfering with optical behavior of flammable materials poses a substantial challenge.Herein,we present a transparent,low thickness,ceramifiable nanosystem coating composed of a highly adhesive base(poly(SSS1-co-HEMA1)),nanoscale layered double hydroxide sheets as ceramic precursors,and supramolecular melamine di-borate as an accelerator.We demonstrate that this hybrid coating can transform into a porous,fire-resistant protective layer with a highly thermostable vitreous phase upon exposure to flame/heat source.A nanosystem coating of just~100μm thickness can significantly increase the limiting oxygen index of wood(Pine)to 37.3%,dramatically reduce total heat release by 78.6%,and maintain low smoke toxicity(CIT_G=0.016).Detailed molecular force analysis,combined with a comprehensive examination of the underlying flame-retardant mechanisms,underscores the effectiveness of this coating.This work offers a strategy for creating efficient,environmentally friendly coatings with fire safety applications across various industries.展开更多
The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in ...The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.展开更多
Sodium-ion batteries hold great promise as next-generation energy storage systems.However,the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of SIBs.In p...Sodium-ion batteries hold great promise as next-generation energy storage systems.However,the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of SIBs.In particular,an unstable cathode–electrolyte interphase(CEI)leads to successive electrolyte side reactions,transition metal leaching and rapid capacity decay,which tends to be exacerbated under high-voltage conditions.Therefore,constructing dense and stable CEIs are crucial for high-performance SIBs.This work reports localized high-concentration electrolyte by incorporating a highly oxidation-resistant sulfolane solvent with non-solvent diluent 1H,1H,5H-octafluoropentyl-1,1,2,2-tetrafluoroethyl ether,which exhibited excellent oxidative stability and was able to form thin,dense and homogeneous CEI.The excellent CEI enabled the O3-type layered oxide cathode NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2)(NaNMF)to achieve stable cycling,with a capacity retention of 79.48%after 300 cycles at 1 C and 81.15%after 400 cycles at 2 C with a high charging voltage of 4.2 V.In addition,its nonflammable nature enhances the safety of SIBs.This work provides a viable pathway for the application of sulfolane-based electrolytes on SIBs and the design of next-generation high-voltage electrolytes.展开更多
The oxidation behavior and mechanism of Mg-Ca alloys in air and under flame exposure were studied.Results show that for the oxidation in air,the Mg-Ca-O oxide film with Ca accumulation and low Mg vapor pressure on the...The oxidation behavior and mechanism of Mg-Ca alloys in air and under flame exposure were studied.Results show that for the oxidation in air,the Mg-Ca-O oxide film with Ca accumulation and low Mg vapor pressure on the surface of Mg-Ca alloys with high Ca content shows good protective effect.However,the falling off phenomenon of the oxide film on Mg_(2)Ca results in the further oxidation.Hence,the Mg-Ca alloys with high Ca content only show good protective effect.For the oxidation in flame,the molten alloys release the Ca atoms to diffuse outward.The Mg-Ca-O oxide film with high Ca accumulation layer forms in Mg-Ca alloys with high Ca content.Despite the high Mg vapor pressure in the molten alloy,the Mg-Ca-O oxide film with high Ca accumulation layer shows excellent protective effect.展开更多
To further expand the application of Mg alloys at high temperatures,the oxidation resistance of Mg-0.3Ca and Mg-3.6Ca alloys with protective coating under flame exposure was studied.Results show that the oxidation res...To further expand the application of Mg alloys at high temperatures,the oxidation resistance of Mg-0.3Ca and Mg-3.6Ca alloys with protective coating under flame exposure was studied.Results show that the oxidation resistance of Mg-Ca alloys under flame exposure is significantly improved by the protective coating,and Mg-3.6Ca alloy shows better oxidation resistance performance.The surface temperature of Mg-Ca alloys is reduced by the coating,therefore improving the oxidation resistance under flame exposure.However,the thermal insulation effect of the coating on Mg-3.6Ca alloy is better,which can be attributed to the Ca accumulation on the surface film.In addition,the surface film with Ca accumulation layer plays a crucial role in protecting the alloy.No obvious Ca accumulation layer exists on the Mg-0.3Ca alloy surface,presenting a restricted protective effect.Nevertheless,the surface film containing Ca accumulation layer is formed on Mg-3.6 Ca alloy,which shows an excellent protective effect.展开更多
Developing polymer materials combining high strength,toughness,multifunctionality,and environmental sustainability remains a major challenge.Herein,high-performance PVA-PCSx composite films were successfully fabricate...Developing polymer materials combining high strength,toughness,multifunctionality,and environmental sustainability remains a major challenge.Herein,high-performance PVA-PCSx composite films were successfully fabricated by incorporating H_(3)PO_(3)-protonated chitosan(PCS)into the PVA matrix as both a bio-based multi-hydrogen-bonding crosslinking agent and a macromolecular flame retardant.Specifically,a comprehensive investigation was conducted on the hydrogen bonding interactions,microstructure,mechanical properties,antibacterial performance,and flame retardancy of the PVA-PCSx films.Strong hydrogen bonds between PCS and PVA enabled excellent compatibility and formed a unique mechanical interlocking interface architecture.This further resulted in superior transparency and synchronous reinforcement and toughening effects in the composites films.Compared with pure PVA,the PVA-PCSx films showed a 23%-51%increase in tensile strength and an 80%-108%improvement in fracture toughness.Moreover,PVA-PCSx films exhibited superior fire safety performance,achieving an LOI value of 31.3%,attaining UL-94 V-0 rating,and reducing the heat release rate by up to 73.1%.Additionally,PVA-PCSx films demonstrated 99.99%antibacterial efficacy against both Escherichia coli and Staphylococcus aureus.Collectively,this study presents a simple yet effective strategy for fabricating high-strength,high-toughness,multifunctional composites using biopolysaccharides as additives.展开更多
In this manuscript,we conveniently prepared a series of polyester-polycarbonate copolymer(PPC-P)/polybutylene adipate terephthalate(PBAT)blends that exhibit both flame-retardant properties and toughness.Piperazine pyr...In this manuscript,we conveniently prepared a series of polyester-polycarbonate copolymer(PPC-P)/polybutylene adipate terephthalate(PBAT)blends that exhibit both flame-retardant properties and toughness.Piperazine pyrophosphate(PAPP),melamine phosphate(MPP)and ZnO were used as synergistic flame retardants for PPC-P/PBAT blends.The effects of synergistic flame retardants on thermal stability,combustion behavior and flame retardancy of PPC-P/PBAT blends were investigated.The results showed that when the ratio of PAPP/MPP/ZnO was 18.4:9.2:2.4,the LOI of PPC-P/PBAT composite was 42.8%,and UL-94 reached V-0 level.The results of cone calorimetry showed that the mass loss rate(MLR),the peak value of the biggest smoke production rate(pSPR)and total smoke production(TSP)of the material decreased,and a continuously expanded carbon layer with a compact structure was formed after combustion.The carbon layer formed after surface combustion protects the material from decomposition over a long temperature range.In terms of mechanical properties,compared with the composites with only PAPP and MPP,PAPP/MPP/ZnO composites can improve the mechanical properties.After adding 2.4 wt% ZnO,the tensile strength and impact strength of the polymer increased to 34.2 MPa and 28.5 kJ/m^(2),respectively.The results showed that the use of non-toxic,environmentally friendly,halogen-free flame retardants to enhance the flame retardant properties of biodegradable polymer composites is a promising direction in the future.展开更多
Generally,gaining fundamental insights into chain processes during the combustion of flame-retardant polymers relies on the qualitative and quantitative characterization of key chain carriers.However,polymer combustio...Generally,gaining fundamental insights into chain processes during the combustion of flame-retardant polymers relies on the qualitative and quantitative characterization of key chain carriers.However,polymer combustion processes based on conventional solid-fuel combustion strategies,due to the high coupling of pyrolysis,combustion,soot formation and oxidation,exhibit relatively high complexity and poor flame stability,and lead to a huge obstacle to the use of optical diagnostics.Herein,a spatial-confinement combustion strategy,which can produce a special staged flame with multi-jets secondary wave,is devised to provide a highly decoupled combustion environment.Glowing soot particles are therefore decoupled from main chemiluminescence region and confined to the flame tip to provide a well-controlled,opticalthin test environment for combustion diagnostic.Based on this strategy,a multi-nozzle-separation(MNS)burner is designed and fabricated,and the combustion processes associated with four model compounds,PVC,PS,PP/TBBA blends and PP/RP blends are investigated by spontaneous spectral diagnosis,and the chemiluminescence fingerprint of key diatomic/triatomic intermediates(such as OH,CH,C_(2),ClO,Br_(2),and PHO)are clearly observed.This encouraging result means that the strategy of spatial-confinement combustion we proposed shows promising prospect in many subjects associated with combustion chain regulation,such as efficient design of flame retardants.展开更多
Developing high-efficient flame-retardant coatings is crucial for fire safety polymer and battery fields.Traditional intumescent coatings and ceramifiable coatings struggle to provide immediate and prolonged protectio...Developing high-efficient flame-retardant coatings is crucial for fire safety polymer and battery fields.Traditional intumescent coatings and ceramifiable coatings struggle to provide immediate and prolonged protection simultaneously,which limits the applicability.To address this,an innovative bi-layered coating with organic/nano-inorganic additives is inspired by differential response behaviors,enabling relay response effect with both fast-acting and extended protection.Specifically,two layers function continuously in the form of a relay.With a mere 320 microns,the bi-layered coating withstands fire temperatures of up to 1400℃for at least 900 s.Consequently,the coating effective prevented burn through in aluminum plates and glass fabric-reinforced epoxy resin,which otherwise were burned through in 135 and 173 s,respectively.Meanwhile,the bi-layered coating suppressed the formation and decomposition of solid interface layer in lithium soft-package batteries,leading to prolonged electrochemical stability and fire safety.Additionally,the bi-layered coating with a fast response endows polyurethane foam with rapid self-extinguishing,preventing ignition even under exposure to strong fire of 1400℃.Shortly,our work offers new insights into the design and development of thin,high-performance,and multi-application flame-retardant coatings.展开更多
A novel eco-friendly charring agent(L-OH)was successfully synthesized by combining pentaerythritol(PER)with lignin through a simple two-step reaction.The structure of L-OH was characterized using Fourier transform inf...A novel eco-friendly charring agent(L-OH)was successfully synthesized by combining pentaerythritol(PER)with lignin through a simple two-step reaction.The structure of L-OH was characterized using Fourier transform infrared(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM)and EDS.In addition,L-OH was introduced into polypropylene(PP)together with melamine(MEL)and ammonium polyphosphate(APP)as an intumescent flame retardant(IFRR).The flame retardancy of PP/IFRR composites were investigated using limited oxygen index(LOI),UL-94,thermogravimetric analysis(TGA)and cone calorimeter(CC)test.The experimental results indicate that the PP/IFRR composites pass the V-0 grade of the UL-94 test when the addition amount of IFRR is no less than 20%,and the LOI value of the composite reaches 32.2%at 30%IFRR addition.The peak heat release rate(PHRR)and peak smoke production rate(PSPR)of the composite decrease by 72.8%and 70.4%compared with pure PP,respectively.The flame retardancy mechanism was investigated by TGA,TG-FTIR and residual carbon analysis.These analyses indicate that L-OH can form a more continuous and dense carbon layer during the combustion process,which is the main factor contributing to the improved flame retardancy of PP.展开更多
There is growing concern about the concept that exposure to environmental chemicals may be contributing to the obesity epidemic.However,there is no consensus on the obesogenic effects of emerging contaminants from a t...There is growing concern about the concept that exposure to environmental chemicals may be contributing to the obesity epidemic.However,there is no consensus on the obesogenic effects of emerging contaminants from a toxicological and environmental perspective.The potential human exposure and experimental evidence for obesogenic effects of emerging contaminants need to be systematically discussed.The main objective of this review is to provide recommendations for further subsequent policy development following a critical analysis of the literature for humans and experimental animals exposed to emerging contaminants.This article reviews human exposure to emerging contaminants(with a focus on antimicrobials,preservatives,water and oil repellents,flame retardants,antibiotics and bisphenols)and the impact of emerging contaminants on obesity.These emerging contaminants have been widely detected in human biological samples.Epidemiological studies provide evidence linking exposure to emerging contaminants to the risks of obesity in humans.Studies based on animalmodels and adipose cells show the obesogenic effects of emerging contaminants and identify modes of action by which contaminants may induce changes in body fat accumulation and lipid metabolic homeostasis.Some knowledge gaps in this area and future directions for further investigation are discussed.展开更多
文摘A sand sample collected at the foot of Flaming Mountain was studied further. On the basis of the change in the relative intensity after heat treatment, one of the sextets observed in its Mossbauer spectrum at liquid nitrogen temperature was ascribed to goethite. This result provides a useful information on the geological history of the region where the mountain is located.
文摘To study the effects of different proportions of aluminum hydroxide and expandable graphite （EG） composites on flame retardation, sealing, mechanical, electrical and other properties of RTV- 1, aluminum hydroxide/expandable graphite （ATH/EG） and silicone rubber composites were prepared by the compression molding method. The experimental results show that heat resistance improves with the increase of proportion of EG. Although the resistance coefficient changes, the composite materials still keep good electrical insulating property. Moreover, oxygen index and expansion index rise first then fall. When ATH/EG is 1：1, the oxygen index reaches the highest; the mechanical property of the silicone rubber is not affected under various environments such as acid, alkali, oily, artificial sea water environments, etc.
基金Supported by the National Natural Science Foundation of China(20976090)the Foundation for the Author of National Excellent Doctoral Dissertation of China(200757)
文摘The partial oxidation of hydrocarbons is an important technical route to produce acetylene for chemical industry.The partial oxidation reactor is the key to high acetylene yields.This work is an experimental and numerical study on the use of a methane flame to produce acetylene.A lab scale partial oxidation reactor was used to produce ultra fuel-rich premixed jet flames.The axial temperature and species concentration profiles were measured for different equivalence ratios and preheating temperatures,and these were compared to numerical results from Computational Fluid Dynamics(CFD)simulations that used the Reynolds Averaged Navier-Stokes Probability Density Function(RANS-PDF)approach coupled with detailed chemical mechanisms.The Leeds 1.5,GRI 3.0 and San Diego mechanisms were used to investigate the effect of the detailed chemical mechanisms.The effects of equivalence ratio and preheating temperature on acetylene production were experimentally and numerically studied.The experimental validations indicated that the present numerical simulation provided reliable prediction on the partial oxidation of methane.Using this simulation method the optimal equivalence ratio for acetylene production was determined to be 3.6.Increasing preheating temperature improved acetylene production and shortened greatly the ignition delay time.So the increase of preheating temperature had to be limited to avoid uncontrolled ignition in the mixing chamber and the pyrolysis of methane in the preheater.
基金financially supported by the Science and Technology Innovation Program of Hunan Province(2024RC3003)the Central South University Innovation-Driven Research Programme(2023CXQD012)the Initiative for Sustainable Energy for its financial support。
文摘By combining the merits of radiative cooling(RC)and evaporation cooling(EC),radiative coupled evaporative cooling(REC)has attracted considerable attention for sub-ambient cooling purposes.However,for outdoor devices,the interior heating power would increase the working temperature and fire risk,which would suppress their above-ambient heat dissipation capabilities and passive water cycle properties.In this work,we introduced a REC design based on an all-in-one photonic hydrogel for above-ambient heat dissipation and flame retardancy.Unlike conventional design RC film for heat dissipation with limited cooling power and fire risk,REC hydrogel can greatly improve the heat dissipation performance in the daytime with a high workload,indicating a 12.0℃lower temperature than the RC film under the same conditions in the outdoor experiment.In the nighttime with a low workload,RC-assisted adsorption can improve atmospheric water harvesting to ensure EC in the daytime.In addition,our REC hydrogel significantly enhanced flame retardancy by absorbing heat without a corresponding temperature rise,thus mitigating fire risks.Thus,our design shows a promising solution for the thermal management of outdoor devices,delivering outstanding performance in both heat dissipation and flame retardancy.
基金This project was financially supported by the National Key Research Program of China(Grant No.2016YFB0302702)the Open Foundation of National&Local Joint Engineering Laboratory for New Petrochemical Materials and Fine Utilization of Resources(Grant No.KF201804).
文摘In this study,a facile and environmentally friendly method with low energy consumption for preparing nanoscale AgCl and BaSO4 co-precipitates(AgCl@BaSO_(4) co-precipitates)was developed based on the metathetical reaction.Then,the dried co-precipitates were melt-compounded with polyamide 6(PA6)resins at a specified mass ratio in a twin-screw extruder.The results demonstrated that in the absence of any coating agent or carrier,the nanoparticles of AgCl@BaSO_(4) co-precipitates were homogeneously dispersed in the PA6 matrix.Further analysis showed that after the addition of AgCl@BaSO_(4) co-precipitates,the antibacterial performance,along with the flame-retardance and anti-dripping characteristics of PA6,was enhanced significantly.In addition,the PA6 composites possessed high spinnability in producing pre-oriented yarn.
文摘High-performance MXene-based polymer nanocomposites are well-suited for various industrial applications owing to their excellent mechanical,thermal,and other properties.However,the fabrication of flame-retardant polymer/MXene nanocom-posites remains challenging owing to the limited flame-retardant properties of MXene itself.This study prepared a novel MXene@Ag@PA hybrid material via radiation modification and complexation reaction.This material was used to further enhance the key properties of ethylene-vinyl acetate(EVA),such as its mechanical properties,thermal conductivity,flame retardancy,and electromagnetic shielding.The addition of two parts of this hybrid material increased the thermal conduc-tivity of EVA by 44.2%and reduced its peak exothermic rate during combustion by 30.1%compared with pure EVA.The material also significantly reduced smoke production and increased the residue content.In the X-band,the electromagnetic shielding effectiveness of the EVA composites reached 20 dB.Moreover,the MXene@Ag@PA hybrid material could be used to further enhance the mechanical properties of EVA composites under electron-beam irradiation.Thus,this study contributes to the development of MXene-based EVA advanced materials that are fire-safe,have high strength,and exhibit good electromagnetic shielding performance for various applications.
基金the financial support from the National Natural Science Foundation of China(524B2168,U22A20149,52173081,and 52273275)。
文摘In recent decades,annual urban fire incidents,including those involving ancient wooden buildings burned,transportation,and solar panels,have increased,leading to significant loss of human life and property.Addressing this issue without altering the surface morphology or interfering with optical behavior of flammable materials poses a substantial challenge.Herein,we present a transparent,low thickness,ceramifiable nanosystem coating composed of a highly adhesive base(poly(SSS1-co-HEMA1)),nanoscale layered double hydroxide sheets as ceramic precursors,and supramolecular melamine di-borate as an accelerator.We demonstrate that this hybrid coating can transform into a porous,fire-resistant protective layer with a highly thermostable vitreous phase upon exposure to flame/heat source.A nanosystem coating of just~100μm thickness can significantly increase the limiting oxygen index of wood(Pine)to 37.3%,dramatically reduce total heat release by 78.6%,and maintain low smoke toxicity(CIT_G=0.016).Detailed molecular force analysis,combined with a comprehensive examination of the underlying flame-retardant mechanisms,underscores the effectiveness of this coating.This work offers a strategy for creating efficient,environmentally friendly coatings with fire safety applications across various industries.
基金support from the National Natural Science Foundation of China(22268025,52473083,and 22475176)Key Research and Development Program of Yunnan Province(202403AP140036)+2 种基金Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)Applied Basic Research Program of Yunnan Province(202201AT070115 and 202201BE070001-031)supported by the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57).
文摘The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.
基金financial support by National Natural Science Foundation(NNSF)of China(Nos.52202269,52002248,U23B2069,22309162)Shenzhen Science and Technology program(No.20220810155330003)+1 种基金Shenzhen Basic Research Project(No.JCYJ20190808163005631)Xiangjiang Lab(22XJ01007).
文摘Sodium-ion batteries hold great promise as next-generation energy storage systems.However,the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of SIBs.In particular,an unstable cathode–electrolyte interphase(CEI)leads to successive electrolyte side reactions,transition metal leaching and rapid capacity decay,which tends to be exacerbated under high-voltage conditions.Therefore,constructing dense and stable CEIs are crucial for high-performance SIBs.This work reports localized high-concentration electrolyte by incorporating a highly oxidation-resistant sulfolane solvent with non-solvent diluent 1H,1H,5H-octafluoropentyl-1,1,2,2-tetrafluoroethyl ether,which exhibited excellent oxidative stability and was able to form thin,dense and homogeneous CEI.The excellent CEI enabled the O3-type layered oxide cathode NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2)(NaNMF)to achieve stable cycling,with a capacity retention of 79.48%after 300 cycles at 1 C and 81.15%after 400 cycles at 2 C with a high charging voltage of 4.2 V.In addition,its nonflammable nature enhances the safety of SIBs.This work provides a viable pathway for the application of sulfolane-based electrolytes on SIBs and the design of next-generation high-voltage electrolytes.
基金National Natural Science Foundation of China(52405425)Project of Natural Science Research in Higher Education Institutions in Jiangsu Province(23KJB430039)+1 种基金Major Natural Science Research Project of Higher Education Institutions in Jiangsu Province(21KJA460007)333 High Level Talent Training Project in Jiangsu Province(2022-3-12-182)。
文摘The oxidation behavior and mechanism of Mg-Ca alloys in air and under flame exposure were studied.Results show that for the oxidation in air,the Mg-Ca-O oxide film with Ca accumulation and low Mg vapor pressure on the surface of Mg-Ca alloys with high Ca content shows good protective effect.However,the falling off phenomenon of the oxide film on Mg_(2)Ca results in the further oxidation.Hence,the Mg-Ca alloys with high Ca content only show good protective effect.For the oxidation in flame,the molten alloys release the Ca atoms to diffuse outward.The Mg-Ca-O oxide film with high Ca accumulation layer forms in Mg-Ca alloys with high Ca content.Despite the high Mg vapor pressure in the molten alloy,the Mg-Ca-O oxide film with high Ca accumulation layer shows excellent protective effect.
基金General Project of Natural Science Research in Higher Education Institutions in Jiangsu Province(23KJB430039)Major Natural Science Research Project of Higher Education Institutions in Jiangsu Province(21KJA460007)National Natural Science Foundation of China(51905462)。
文摘To further expand the application of Mg alloys at high temperatures,the oxidation resistance of Mg-0.3Ca and Mg-3.6Ca alloys with protective coating under flame exposure was studied.Results show that the oxidation resistance of Mg-Ca alloys under flame exposure is significantly improved by the protective coating,and Mg-3.6Ca alloy shows better oxidation resistance performance.The surface temperature of Mg-Ca alloys is reduced by the coating,therefore improving the oxidation resistance under flame exposure.However,the thermal insulation effect of the coating on Mg-3.6Ca alloy is better,which can be attributed to the Ca accumulation on the surface film.In addition,the surface film with Ca accumulation layer plays a crucial role in protecting the alloy.No obvious Ca accumulation layer exists on the Mg-0.3Ca alloy surface,presenting a restricted protective effect.Nevertheless,the surface film containing Ca accumulation layer is formed on Mg-3.6 Ca alloy,which shows an excellent protective effect.
基金financially supported by the National Natural Science Foundation of China(Nos.51991351,52173100)the Taishan Scholars Program(No.tsqn202312176)the Youth Innovation Team Project of Shandong Province(No.2022KJ304)。
文摘Developing polymer materials combining high strength,toughness,multifunctionality,and environmental sustainability remains a major challenge.Herein,high-performance PVA-PCSx composite films were successfully fabricated by incorporating H_(3)PO_(3)-protonated chitosan(PCS)into the PVA matrix as both a bio-based multi-hydrogen-bonding crosslinking agent and a macromolecular flame retardant.Specifically,a comprehensive investigation was conducted on the hydrogen bonding interactions,microstructure,mechanical properties,antibacterial performance,and flame retardancy of the PVA-PCSx films.Strong hydrogen bonds between PCS and PVA enabled excellent compatibility and formed a unique mechanical interlocking interface architecture.This further resulted in superior transparency and synchronous reinforcement and toughening effects in the composites films.Compared with pure PVA,the PVA-PCSx films showed a 23%-51%increase in tensile strength and an 80%-108%improvement in fracture toughness.Moreover,PVA-PCSx films exhibited superior fire safety performance,achieving an LOI value of 31.3%,attaining UL-94 V-0 rating,and reducing the heat release rate by up to 73.1%.Additionally,PVA-PCSx films demonstrated 99.99%antibacterial efficacy against both Escherichia coli and Staphylococcus aureus.Collectively,this study presents a simple yet effective strategy for fabricating high-strength,high-toughness,multifunctional composites using biopolysaccharides as additives.
基金Financial support from National Natural Science Foundation of China(Grant No.22075298)National Key R&D Program of China(2022YFD2301204)is gratefully acknowledged.
文摘In this manuscript,we conveniently prepared a series of polyester-polycarbonate copolymer(PPC-P)/polybutylene adipate terephthalate(PBAT)blends that exhibit both flame-retardant properties and toughness.Piperazine pyrophosphate(PAPP),melamine phosphate(MPP)and ZnO were used as synergistic flame retardants for PPC-P/PBAT blends.The effects of synergistic flame retardants on thermal stability,combustion behavior and flame retardancy of PPC-P/PBAT blends were investigated.The results showed that when the ratio of PAPP/MPP/ZnO was 18.4:9.2:2.4,the LOI of PPC-P/PBAT composite was 42.8%,and UL-94 reached V-0 level.The results of cone calorimetry showed that the mass loss rate(MLR),the peak value of the biggest smoke production rate(pSPR)and total smoke production(TSP)of the material decreased,and a continuously expanded carbon layer with a compact structure was formed after combustion.The carbon layer formed after surface combustion protects the material from decomposition over a long temperature range.In terms of mechanical properties,compared with the composites with only PAPP and MPP,PAPP/MPP/ZnO composites can improve the mechanical properties.After adding 2.4 wt% ZnO,the tensile strength and impact strength of the polymer increased to 34.2 MPa and 28.5 kJ/m^(2),respectively.The results showed that the use of non-toxic,environmentally friendly,halogen-free flame retardants to enhance the flame retardant properties of biodegradable polymer composites is a promising direction in the future.
基金supported by the National Natural Science Foundation of China(No.51827803)the Fundamental Research Funds for the Central Universities,111 Center(No.B20001)Institutional Research Fund from Sichuan University(No.2021SCUNL201).
文摘Generally,gaining fundamental insights into chain processes during the combustion of flame-retardant polymers relies on the qualitative and quantitative characterization of key chain carriers.However,polymer combustion processes based on conventional solid-fuel combustion strategies,due to the high coupling of pyrolysis,combustion,soot formation and oxidation,exhibit relatively high complexity and poor flame stability,and lead to a huge obstacle to the use of optical diagnostics.Herein,a spatial-confinement combustion strategy,which can produce a special staged flame with multi-jets secondary wave,is devised to provide a highly decoupled combustion environment.Glowing soot particles are therefore decoupled from main chemiluminescence region and confined to the flame tip to provide a well-controlled,opticalthin test environment for combustion diagnostic.Based on this strategy,a multi-nozzle-separation(MNS)burner is designed and fabricated,and the combustion processes associated with four model compounds,PVC,PS,PP/TBBA blends and PP/RP blends are investigated by spontaneous spectral diagnosis,and the chemiluminescence fingerprint of key diatomic/triatomic intermediates(such as OH,CH,C_(2),ClO,Br_(2),and PHO)are clearly observed.This encouraging result means that the strategy of spatial-confinement combustion we proposed shows promising prospect in many subjects associated with combustion chain regulation,such as efficient design of flame retardants.
基金the support by the National Natural Science Foundation of China(grant numbers 52273048 and 51973006)the Beijing Natural Science Foundation of China(grant number 2222052)the financial support of this work by BIOFIRESAFE(PID2020-117274RB-I00)funded by MINECO,Spain。
文摘Developing high-efficient flame-retardant coatings is crucial for fire safety polymer and battery fields.Traditional intumescent coatings and ceramifiable coatings struggle to provide immediate and prolonged protection simultaneously,which limits the applicability.To address this,an innovative bi-layered coating with organic/nano-inorganic additives is inspired by differential response behaviors,enabling relay response effect with both fast-acting and extended protection.Specifically,two layers function continuously in the form of a relay.With a mere 320 microns,the bi-layered coating withstands fire temperatures of up to 1400℃for at least 900 s.Consequently,the coating effective prevented burn through in aluminum plates and glass fabric-reinforced epoxy resin,which otherwise were burned through in 135 and 173 s,respectively.Meanwhile,the bi-layered coating suppressed the formation and decomposition of solid interface layer in lithium soft-package batteries,leading to prolonged electrochemical stability and fire safety.Additionally,the bi-layered coating with a fast response endows polyurethane foam with rapid self-extinguishing,preventing ignition even under exposure to strong fire of 1400℃.Shortly,our work offers new insights into the design and development of thin,high-performance,and multi-application flame-retardant coatings.
基金the equipment support of Sharing Platform of Scientific Equipments,Ministry of Education's Research Center for Comprehensive Utilization and Clean Process Engineering of Phosphrous Resources,Sichuan University。
文摘A novel eco-friendly charring agent(L-OH)was successfully synthesized by combining pentaerythritol(PER)with lignin through a simple two-step reaction.The structure of L-OH was characterized using Fourier transform infrared(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM)and EDS.In addition,L-OH was introduced into polypropylene(PP)together with melamine(MEL)and ammonium polyphosphate(APP)as an intumescent flame retardant(IFRR).The flame retardancy of PP/IFRR composites were investigated using limited oxygen index(LOI),UL-94,thermogravimetric analysis(TGA)and cone calorimeter(CC)test.The experimental results indicate that the PP/IFRR composites pass the V-0 grade of the UL-94 test when the addition amount of IFRR is no less than 20%,and the LOI value of the composite reaches 32.2%at 30%IFRR addition.The peak heat release rate(PHRR)and peak smoke production rate(PSPR)of the composite decrease by 72.8%and 70.4%compared with pure PP,respectively.The flame retardancy mechanism was investigated by TGA,TG-FTIR and residual carbon analysis.These analyses indicate that L-OH can form a more continuous and dense carbon layer during the combustion process,which is the main factor contributing to the improved flame retardancy of PP.
基金supported by the National Key Research&Development Programof China,Ministry of Science and Technology(Nos.2022YFE0134900 and 2022YFC3703200)the Key Research and Development Programof Zhejiang Province,China(No.2024C03228)the National Nature Science Foundation of China(Nos.22376184 and 22076166).
文摘There is growing concern about the concept that exposure to environmental chemicals may be contributing to the obesity epidemic.However,there is no consensus on the obesogenic effects of emerging contaminants from a toxicological and environmental perspective.The potential human exposure and experimental evidence for obesogenic effects of emerging contaminants need to be systematically discussed.The main objective of this review is to provide recommendations for further subsequent policy development following a critical analysis of the literature for humans and experimental animals exposed to emerging contaminants.This article reviews human exposure to emerging contaminants(with a focus on antimicrobials,preservatives,water and oil repellents,flame retardants,antibiotics and bisphenols)and the impact of emerging contaminants on obesity.These emerging contaminants have been widely detected in human biological samples.Epidemiological studies provide evidence linking exposure to emerging contaminants to the risks of obesity in humans.Studies based on animalmodels and adipose cells show the obesogenic effects of emerging contaminants and identify modes of action by which contaminants may induce changes in body fat accumulation and lipid metabolic homeostasis.Some knowledge gaps in this area and future directions for further investigation are discussed.
