In this study,reclaimed asphalt pavement(RAP)used in different percentages in hot mix asphalt(HMA)and warm mix asphalt(WMA)were tested for moisture,fracture and rutting resistance adding hydrogenated castor oil flakes...In this study,reclaimed asphalt pavement(RAP)used in different percentages in hot mix asphalt(HMA)and warm mix asphalt(WMA)were tested for moisture,fracture and rutting resistance adding hydrogenated castor oil flakes(HCOF)as rejuvenating agent.Volumetric and Marshall parameters were evaluated for both types of mixtures.Addition of 5%of HCOF by weight of binder content in RAP found to restore properties of aged binder.WMA mix was made by adding 0.1%Zycotherm by weight of optimum binder content.Moisture,rutting and fracture damage performance were assessed utilizing indirect tensile strength,wheel tracking and semi-circular bending tests.The mix's tensile strength ratio increased by 2.3%in the HMA with RAP(HMA-R)mix compared to the WMA with RAP(WMA-R)mix at 10%RAP content.HMA mixes provide better resistance to rutting compared to WMA.However,40%of RAP content HMA-R and WMA-R using HCOF rejuvenator shows greater rutting performance compared to other RAP mix.HMA-R mix fracture resistance increased by 18.14%compared to WMA-R mix when RAP content increases to 40%.Regression analyses were carried out to validate the strain energy found from fracture damage analysis of both HMA-R and WMA-R with R2 value more than 0.9.HMA-R protected moisture and fracture damage better than WMA-R.The rejuvenating efficiency of HCOF was further validated using Fourier transform infrared and microscopic analysis.展开更多
The ternary transition-metal telluride TaCo_(2)Te_(2)has been reported to host a topological band structure characterized by a nontrivial Berry phase.While transport properties have been investigated in both bulk crys...The ternary transition-metal telluride TaCo_(2)Te_(2)has been reported to host a topological band structure characterized by a nontrivial Berry phase.While transport properties have been investigated in both bulk crystals and thick flakes(>150 nm),studies on thin flakes(<100 nm)of this van der Waals(vdW)material remain scarce.We investigate the low-temperature transport properties of TaCo_(2)Te_(2)thin flakes by fabricating Hall bar devices on mechanically exfoliated flakes with different thicknesses(15 nm and 90 nm).Temperature-dependent resistance measurements reveal that the 15-nm-thick sample exhibits a lower residual resistivity ratio and Debye temperature compared to the 90-nm-thick one.Magnetotransport measurements under perpendicular magnetic fields up to±14 T demonstrate lower magnetoresistance,carrier concentration,and mobility in the thinner sample,suggesting increased phonon scattering due to defect-induced disorder.Remarkably,pronounced Shubnikov-de Haas(SdH)oscillations are observed above 8 T in both samples in spite of the defect-induced disorder.Analysis of the Landau fan diagram yields a non-zero Berry phase in both samples,indicating the existence of a topologically non-trivial phase in TaCo_(2)Te_(2)thin flakes.Our findings establish TaCo_(2)Te_(2)as a promising candidate for exploring intrinsic topological states in layered materials.展开更多
A novel wet-chemical method for the preparation of silver flakes was studied. The well-defined particles were prepared by directly adding FeSO4 solution into AgNO3 solution containing citric acid at an agitation speed...A novel wet-chemical method for the preparation of silver flakes was studied. The well-defined particles were prepared by directly adding FeSO4 solution into AgNO3 solution containing citric acid at an agitation speed of 150 r/min at room temperature. The products were characterized by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results show that particles are irregular thin silver flakes. And the sizes of them range from 2 to 10 μm. It is found that citric acid plays an important role in the formation of sliver flakes. There is an optimum amount of citric acid for the preparation of silver flakes by this method. It is also found that high reduction rate is favorable for the formation of silver flakes.展开更多
The effect of graphite surface modification on the thermal conductivity(TC) and bending strength of graphite flakes/Al composites(Gf/Al) prepared by gas pressure infiltration were investigated. Al3 Ni and Al4C3 phase ...The effect of graphite surface modification on the thermal conductivity(TC) and bending strength of graphite flakes/Al composites(Gf/Al) prepared by gas pressure infiltration were investigated. Al3 Ni and Al4C3 phase may form at the interface in Ni-coated Gf/Al and uncoated Gf/Al composites, respectively, while the Al-Cu compound cannot be observed in Cu-coated Gf/Al composites. The Cu and Ni coatings enhance TC and the bending strength of the composites in the meantime. TC of Cu-coated Gf/Al composites reach 515 Wm^-1·K^-1 with 75 vol% Gf, which are higher than that of Ni-coated Gf/Al. Meanwhile, due to Al3 Ni at the interface, the bending strength of Ni-coated Gf/Al composites are far more than those of the uncoated and Cu-coated Gf/Al with the same content of Gf. The results indicate that metal-coated Gf can effectively improve the interfacial bonding between Gf and Al.展开更多
Exploring high-performance soft actuators from biomass resources is significant for developing eco-friendly smart devices.Dried bonito(DB)flake is a common food as well as a biomass material,and it can produce irregul...Exploring high-performance soft actuators from biomass resources is significant for developing eco-friendly smart devices.Dried bonito(DB)flake is a common food as well as a biomass material,and it can produce irregular motion in changed moisture,just like dancing.Inspired by this intriguing phenomenon,a cost-effective,biocom patible,and biodegradable moisture-responsive DB film actuator with a gradient structure is developed.The DB film actuator exhibits rapid and reversible bending deformation triggered by a humidity gradient with a high bending speed(40°s-1)and a maximum bending angle(180°).More-over,the DB film actuator shows large bending deformation(-71°to+51°)with a high actuation force(214.7 Pa)in response to changes in relative humidity.Furthermore,the actuation performance can be also tuned by adjusting the thickness of the film.Potential applications of this actuator,including smart grippers,crawling robots,and biomimetic flowers for visible humidity sensing,are demonstrated.More importantly,smart sweat-responsive wearables that automatically deform to promote sweat evaporation and convection during exercise are constructed based on the actuator,making it promising for adaptive personal thermal management.This work offers an easily processable,cost-effective,and environmentally benign strategy to construct moisture-responsive actuators for future eco-friendly smart devices.展开更多
The electronic and superconducting properties of Fe_(1-δ)Se single-crystal flakes grown hydrothermally are studied by the transport measurements under zero and high magnetic fields up to 38.5 T.The results contrast s...The electronic and superconducting properties of Fe_(1-δ)Se single-crystal flakes grown hydrothermally are studied by the transport measurements under zero and high magnetic fields up to 38.5 T.The results contrast sharply with those previously reported for nematically ordered Fe Se by chemical-vapor-transport(CVT)growth.No signature of the electronic nematicity,but an evident metal-to-nonmetal crossover with increasing temperature,is detected in the normal state of the present hydrothermal samples.Interestingly,a higher superconducting critical temperature T_c of 13.2 K is observed compared to a suppressed T_c of 9 K in the presence of the nematicity in the CVT Fe Se.Moreover,the upper critical field in the zero-temperature limit is found to be isotropic with respect to the field direction and to reach a higher value of-42 T,which breaks the Pauli limit by a factor of 1.8.展开更多
We study systematically the negative magnetoresistance(MR)effect in WTe_(2±α)flakes with different thicknesses and doping concentrations.The negative MR is sensitive to the relative orientation between electrica...We study systematically the negative magnetoresistance(MR)effect in WTe_(2±α)flakes with different thicknesses and doping concentrations.The negative MR is sensitive to the relative orientation between electrical-/magnetic-field and crystallographic orientation of WTe_(2±α).The analysis proves that the negative MR originates from chiral anomaly and is anisotropic.Maximum entropy mobility spectrum is used to analyze the electron and hole concentrations in the flake samples.It is found that the negative MR observed in WTe_(2±α)flakes with low doping concentration is small,and the high doping concentration is large.The doping-induced disorder obviously inhibits the positive MR,so the negative MR can be more easily observed.In a word,we introduce disorder to suppress positive MR by doping,and successfully obtain the negative MR in WTe_(2±α)flakes with different thicknesses and doping concentrations,which indicates that the chiral anomaly effect in WTe_(2)is robust.展开更多
As an elemental semiconductor,tellurium has recently attracted intense interest due to its non-trivial band topology,and the resulted intriguing topological transport phenomena.In this study we report systematic elect...As an elemental semiconductor,tellurium has recently attracted intense interest due to its non-trivial band topology,and the resulted intriguing topological transport phenomena.In this study we report systematic electronic transport studies on tellurium flakes grown via a simple vapor deposition process.The sample is self-hole-doped,and exhibits typical weak localization behavior at low temperatures.Substantial negative longitudinal magnetoresistance under parallel magnetic field is observed over a wide temperature region,which is considered to share the same origin with that in tellurium bulk crystals,i.e.,the Weyl points near the top of valence band.However,with lowering temperature the longitudinal magnetoconductivity experiences a transition from parabolic to linear field dependency,differing distinctly from the bulk counterparts.Further analysis reveals that such a modulation of Weyl behaviors in this low-dimensional tellurium structure can be attributed to the enhanced inter-valley scattering at low temperatures.Our results further extend Weyl physics into a low-dimensional semiconductor system,which may find its potential application in designing topological semiconductor devices.展开更多
Graphene flakes(GF)have been prepared and assessed as a material for improving flow in oil pipelines under the effect of an electric field.In particular,different amounts of GFs have been considered in order to determ...Graphene flakes(GF)have been prepared and assessed as a material for improving flow in oil pipelines under the effect of an electric field.In particular,different amounts of GFs have been considered in order to determine the optimal flow conditions.The GFs were prepared from graphite foam,derived from the dehydration of sugar with a particle size of 500-600μm,which was dispersed in ethanol and exfoliated in a ball mill under a shear force.After 15 h of exfoliation,sonication,and subsequent high-speed centrifugation at 3000 rpm,irregular-shaped GFs of 50-140 nm were produced and characterized using scanning electron microscopy,X-ray diffractometry,atomic force microscopy,and Raman spectroscopy.The prepared graphene sheets have been found to display excellent morphology and good graphitic structure.Experiments on flow improvement were conducted using the central composite rotatable design method for three parameters:stimulation time(15,30,45,and 60 s),applied voltage(150,170,200,and 220 V),and concentration of the GFs(0,100,200,and 400 mg/L).The optimal conditions for improved crude oil flow were then determined using the STATISTICA and WinQSB software packages.The results have confirmed the effectiveness of the use of the prepared GFs as a flow improver for crude oil,where the flow improvement is essentially a result of a reduction in viscosity and suppression of friction in the crude oil system.展开更多
Food diversification is a way to strengthen national food security, for example by reducing the dependence on wheat flour as a main raw material of various food products through the use of cassava flour. Cassava flour...Food diversification is a way to strengthen national food security, for example by reducing the dependence on wheat flour as a main raw material of various food products through the use of cassava flour. Cassava flour, a rich source of carbohydrates, can be used in the making of flakes. In this study, the Virgin coconut oil （VCO） waste flour was added in cassava flour to produce gluten-free cassava flour flakes with high dietary fiber contents. The six different formulas of flakes were used in this study with addition of 0% （control）, 10%, 20%, 30%, 40% and 50% coconut waste flour, respectively. Then, the chemical and microbiological characteristics of the flakes were measured. Based on the proximate data, both flours have a good quality. The microbiological analysis shows cassava flour and coconut waste flour have good sanitation and food safety. Results showed that flakes with 80% cassava flour and 20% coconut waste flour are gluten-free and contain 2.52% water, 2.27% ash, 14.40% fat, 4.50% protein, 76.31% carbohydrate, 8.56% dietary fiber. Therefore, it can be said that cassava flour flakes can serve as gluten-free and rich dietary fiber ready-to-eat food.展开更多
Research interests in recent years have expanded into quantum materials that display novel magnetism incorporating strong correlations,topological effects,and dimensional crossovers.Fe_(3)GeTe_(2)represents such a two...Research interests in recent years have expanded into quantum materials that display novel magnetism incorporating strong correlations,topological effects,and dimensional crossovers.Fe_(3)GeTe_(2)represents such a twodimensional van der Waals platform exhibiting itinerant ferromagnetism with many intriguing properties.Up to date,most electronic transport studies on Fe_(3)GeTe_(2)have been limited to its anomalous Hall responses while the longitudinal counterpart(such as magnetoresistance)remains largely unexplored.Here,we report a few unusual transport behaviors on thin flakes of Fe_(3)GeTe_(2).Upon cooling to the base temperature,the sample develops a resistivity upturn that shows a crossover from a marginally-ln T to a-T^(1/2)dependence,followed by a lowertemperature deviation.Moreover,we observe a negative and non-saturating linear magnetoresistance when the magnetization is parallel or antiparallel to the external magnetic field.The slope of the linear magnetoresistance also shows a nonmonotonic temperature dependence.We deduce an anomalous contribution to the magnetoresistance at low temperatures with a scaling function proportional-HT^(1/2),as well as a temperature-independent linear term.Possible mechanisms that could account for our observations are discussed.展开更多
The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experim...The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experiments, and used to investigate the principal effects of the process parameters such as plasma density, electron temperature, surface temperature and time of growth on the size and structure of the plasma-grown graphene flakes. It was demonstrated that the higher growth temperatures result in larger graphene flakes reaching 5 μm, and simultaneously, lead to much lower density of the carbon atoms adsorbed on the flake surface. The low density of the carbon adatoms reduces the probability of the additional graphene layer nucleation on surface of growing flake, thus eventually resulting in the synthesis of the most valuable single-layered graphenes.展开更多
The use of laser-induced breakdown spectroscopy(LIBS) for the analysis of heavy metals in water samples is investigated. Some factors such as splashing, surface ripples, extinction of emitted intensity, and a shorter ...The use of laser-induced breakdown spectroscopy(LIBS) for the analysis of heavy metals in water samples is investigated. Some factors such as splashing, surface ripples, extinction of emitted intensity, and a shorter plasma lifetime will influence the results if the water sample is directly measured. In order to avoid these disadvantages and the ‘coffee-ring effect', hydrophilic graphite flakes with annular grooves were used for the first time to enrich and concentrate heavy metals in water samples before being analyzed by LIBS. The proposed method and procedure have been evaluated to concentrate and analyze cadmium, chromium, copper, nickel, lead,and zinc in a water sample. The correlation coefficients were all above 0.99. The detection limits of 0.029, 0.087, 0.012, 0.083, 0.125, and 0.049 mgl^(-1) for Cd, Cr, Cu, Ni, Pb, and Zn,respectively, were obtained in samples prepared in a laboratory. With this structure, the heavy metals homogeneously distribute in the annular groove and the relative standard deviations are all below 6%. This method is very convenient and suitable for online in situ analysis of heavy metals.展开更多
To explore the mechanism of carbonyl iron flake composites for microwave complex permeability, this paper investigates the feature of the flakes. The shape anisotropy was certified by the results of the magnetization ...To explore the mechanism of carbonyl iron flake composites for microwave complex permeability, this paper investigates the feature of the flakes. The shape anisotropy was certified by the results of the magnetization hysteresis loops and the Mossbauer spectra. Furthermore, the shape anisotropy was used to explain the origin of composite microwave performance, and the calculated results agree with the experiment. It is believed that the shape anisotropy dominates microwave complex permeability, and the natural resonance plays main role in flake.展开更多
Achieving thermal management composite material with isotropic thermal dissipation property by using an environmentally friendly and efficient method is one of the most challenging techniques as a traditional approach...Achieving thermal management composite material with isotropic thermal dissipation property by using an environmentally friendly and efficient method is one of the most challenging techniques as a traditional approach tending to form a horizontally arranged network within the polymer matrix or the preparation steps which are unduly cumbersome.What presented here is a closestack thermally conductive three-dimensional(3D)hybrid network structure prepared by a simple and green strategy that intercalating the modified aluminum oxide(m-Al_(2)O_(3))spheres of different sizes into the modified two-dimensional(2D)boron nitride(m-h-BN)flakes.An effective 3D network is created by the multi-dimensional fillers through volume exclusion and synergistic effects.The m-h-BN flakes facilitate in-plane heat transfer,while the variously sized m-Al_(2)O_(3)spheres insert into the gaps between adjacent m-h-BN flakes,which is conducive to the heat transfer in the out-of-plane direction.Additionally,strong interactions between the m-Al_(2)O_(3)and m-h-BN promote the effective heat flux inside the 3D hybrid network structure.The 3D hybrid composite displays favorable quasi-isotropic heat dissipation property(through-plane thermal conductivity of 2.2 W·m^(-1)·K^(-1)and in-plane thermal conductivity of 11.6 W·m^(-1)·K^(-1))in comparison with the single-filler composites.Furthermore,the hybrid-filler composite has excellent mechanical properties and thermal stability.The efficient heat dissipation capacity of the hybrid composite is further confirmed by a finite element simulation,which indicates that the sphere-flake hybrid structure possesses a higher thermal conductivity and faster thermal response performance than the single-filler system.The composite material has great potential in meeting the needs of emerging and advancing power systems.展开更多
The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites(50 vol%)with different inclination angles were fabricated via fl...The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites(50 vol%)with different inclination angles were fabricated via flake powder metallurgy,and the results show that with increasing the size of Al particle from 25.6 to 50.7μm,the inclination angle of graphite flake decreases from 7.3°to 4.4°,while the in-plane thermal conductivity of composites increases from 473 to 555 Wm-1 K-1.Based on the rules of mixture,an effective model was established to qualify and quantify the relation between the inclination angle and the in-plane thermal conductivity of the corresponding composites.This model can also be applied to other flake particle-reinforced composites.展开更多
Ti3C2Tx,a most studied member of MXene family,shows promise as a candidate electrode for pseudocapacitor due to its electronic conductivity and hydrophilic surface.However,the unsatisfactory yield of Ti3C2Tx few-layer...Ti3C2Tx,a most studied member of MXene family,shows promise as a candidate electrode for pseudocapacitor due to its electronic conductivity and hydrophilic surface.However,the unsatisfactory yield of Ti3C2Tx few-layer flakes significantly restricted it in real applications.Here,we proposed a simple solution to boost the yield of Ti3C2Tx few-layer flakes by decreasing precursor size.When using the small500 mesh Ti3AlC2 powders as raw material,high yield of 65%was successfully achieved.Moreover,the asreceived small flakes also exhibit an enhanced pseudocapacior performance owing to their excellent electrical conductivity,expanded inte rlayer space and more O content on the surface.This work not only sheds light on the cost effective mass production of Ti3C2Tx few-layer flakes,but also provides an efficient solution for the design of MXene electrodes with high pseudocapacior performance.展开更多
The soft magnetic Fe-Si-B nanocrystalline/ amorphous flakes were fabricated by ball milling from the elemental powders and annealing the amorphous precursor, respectively. The microstructure, magnetic and microwave pr...The soft magnetic Fe-Si-B nanocrystalline/ amorphous flakes were fabricated by ball milling from the elemental powders and annealing the amorphous precursor, respectively. The microstructure, magnetic and microwave properties were evaluated by different synthesis methods. By computation, ball-milled Fe78Si13B9 flakes demonstrated potential appfication in absorption.展开更多
Transition metal oxides have attracted intense interest owing to their abundant physical and chemical properties.The controlled preparation of large-area,high-quality two-dimensional crystals is essential for revealin...Transition metal oxides have attracted intense interest owing to their abundant physical and chemical properties.The controlled preparation of large-area,high-quality two-dimensional crystals is essential for revealing their inherent properties and realizing high-performance devices.However,fabricating two-dimensional(2D)transition metal oxides using a general approach still presents substantial challenges.Herein,we successfully achieve highly crystalline nickel oxide(NiO)flakes with a thickness as thin as 3.3 nm through the salt-assisted vapor-liquid-solid(VLS)growth method,which demonstrated exceptional stability under ambient conditions.To explore the great potential of the NiO crystal in this work,an artificial synapse based on the NiO-flake resistive switching(RS)layer is investigated.Short-term and long-term synaptic behaviors are obtained with external stimuli.The artificial synaptic performance provides the foundation of the neuromorphic application,including handwriting number recognition based on artificial neuron network(ANN)and the virtually unsupervised learning capability based on generative adversarial network(GAN).This pioneering work not only paves new paths for the synthesis of 2D oxides in the future but also demonstrates the substantial potential of oxides in the field of neuromorphic computing.展开更多
A facile colloidal route to synthesize MoSe2 porous microspheres with diameters of 400-600 nm made up of MoSe2 monolayer flakes （-0.7 nm in thickness） is reported. The solvents trioctylamine （TOA） and oleylamine ...A facile colloidal route to synthesize MoSe2 porous microspheres with diameters of 400-600 nm made up of MoSe2 monolayer flakes （-0.7 nm in thickness） is reported. The solvents trioctylamine （TOA） and oleylamine （OAM） are found to play important roles in the formation of MoSe2 microspheres, whereby TOA determines the three-dimensional （3D） microspherical morphology and OAM directs the formation of MoSes monolayer flakes. The robust 3D MoSe2 microspheres exhibit remarkable activity and durability for the electrocatalytic hydrogen evolution reaction （HER） in acid, maintaining a small onset overpotential of -77 mV and keeping a small overpotential of 100 mV for a current density of 5 mA/cm2 after 1,000 cycles. In addition, similar 3D WSe2 microspheres can also be prepared by using this method. We expect this facile colloidal route could further be expanded to synthesize other porous structures which will find applications in fields such as in energy storage, catalysis, and sensing.展开更多
文摘In this study,reclaimed asphalt pavement(RAP)used in different percentages in hot mix asphalt(HMA)and warm mix asphalt(WMA)were tested for moisture,fracture and rutting resistance adding hydrogenated castor oil flakes(HCOF)as rejuvenating agent.Volumetric and Marshall parameters were evaluated for both types of mixtures.Addition of 5%of HCOF by weight of binder content in RAP found to restore properties of aged binder.WMA mix was made by adding 0.1%Zycotherm by weight of optimum binder content.Moisture,rutting and fracture damage performance were assessed utilizing indirect tensile strength,wheel tracking and semi-circular bending tests.The mix's tensile strength ratio increased by 2.3%in the HMA with RAP(HMA-R)mix compared to the WMA with RAP(WMA-R)mix at 10%RAP content.HMA mixes provide better resistance to rutting compared to WMA.However,40%of RAP content HMA-R and WMA-R using HCOF rejuvenator shows greater rutting performance compared to other RAP mix.HMA-R mix fracture resistance increased by 18.14%compared to WMA-R mix when RAP content increases to 40%.Regression analyses were carried out to validate the strain energy found from fracture damage analysis of both HMA-R and WMA-R with R2 value more than 0.9.HMA-R protected moisture and fracture damage better than WMA-R.The rejuvenating efficiency of HCOF was further validated using Fourier transform infrared and microscopic analysis.
基金supported by the National Key Research and Development Program of China(Grant Nos.2022YFA1403400 and 2020YFA0309200)the National Natural Science Foundation of China(Grant Nos.12074417,92065203,92365207,and 92477115)+1 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB33000000)the Synergetic Extreme Condition User Facility sponsored by the National Development and Reform Commission,and the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0302600).
文摘The ternary transition-metal telluride TaCo_(2)Te_(2)has been reported to host a topological band structure characterized by a nontrivial Berry phase.While transport properties have been investigated in both bulk crystals and thick flakes(>150 nm),studies on thin flakes(<100 nm)of this van der Waals(vdW)material remain scarce.We investigate the low-temperature transport properties of TaCo_(2)Te_(2)thin flakes by fabricating Hall bar devices on mechanically exfoliated flakes with different thicknesses(15 nm and 90 nm).Temperature-dependent resistance measurements reveal that the 15-nm-thick sample exhibits a lower residual resistivity ratio and Debye temperature compared to the 90-nm-thick one.Magnetotransport measurements under perpendicular magnetic fields up to±14 T demonstrate lower magnetoresistance,carrier concentration,and mobility in the thinner sample,suggesting increased phonon scattering due to defect-induced disorder.Remarkably,pronounced Shubnikov-de Haas(SdH)oscillations are observed above 8 T in both samples in spite of the defect-induced disorder.Analysis of the Landau fan diagram yields a non-zero Berry phase in both samples,indicating the existence of a topologically non-trivial phase in TaCo_(2)Te_(2)thin flakes.Our findings establish TaCo_(2)Te_(2)as a promising candidate for exploring intrinsic topological states in layered materials.
基金Project(B20121806)supported by the Science and Technology Research Program of Education Department of Hubei Province,China
文摘A novel wet-chemical method for the preparation of silver flakes was studied. The well-defined particles were prepared by directly adding FeSO4 solution into AgNO3 solution containing citric acid at an agitation speed of 150 r/min at room temperature. The products were characterized by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results show that particles are irregular thin silver flakes. And the sizes of them range from 2 to 10 μm. It is found that citric acid plays an important role in the formation of sliver flakes. There is an optimum amount of citric acid for the preparation of silver flakes by this method. It is also found that high reduction rate is favorable for the formation of silver flakes.
基金Funded by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China(No.126-QP-2015).
文摘The effect of graphite surface modification on the thermal conductivity(TC) and bending strength of graphite flakes/Al composites(Gf/Al) prepared by gas pressure infiltration were investigated. Al3 Ni and Al4C3 phase may form at the interface in Ni-coated Gf/Al and uncoated Gf/Al composites, respectively, while the Al-Cu compound cannot be observed in Cu-coated Gf/Al composites. The Cu and Ni coatings enhance TC and the bending strength of the composites in the meantime. TC of Cu-coated Gf/Al composites reach 515 Wm^-1·K^-1 with 75 vol% Gf, which are higher than that of Ni-coated Gf/Al. Meanwhile, due to Al3 Ni at the interface, the bending strength of Ni-coated Gf/Al composites are far more than those of the uncoated and Cu-coated Gf/Al with the same content of Gf. The results indicate that metal-coated Gf can effectively improve the interfacial bonding between Gf and Al.
基金supported by the Fundamental Research Funds for the Central Universities and Heilongjiang Provincial Natural Sci-ence Foundation of China(Grant No.YQ2020E009).
文摘Exploring high-performance soft actuators from biomass resources is significant for developing eco-friendly smart devices.Dried bonito(DB)flake is a common food as well as a biomass material,and it can produce irregular motion in changed moisture,just like dancing.Inspired by this intriguing phenomenon,a cost-effective,biocom patible,and biodegradable moisture-responsive DB film actuator with a gradient structure is developed.The DB film actuator exhibits rapid and reversible bending deformation triggered by a humidity gradient with a high bending speed(40°s-1)and a maximum bending angle(180°).More-over,the DB film actuator shows large bending deformation(-71°to+51°)with a high actuation force(214.7 Pa)in response to changes in relative humidity.Furthermore,the actuation performance can be also tuned by adjusting the thickness of the film.Potential applications of this actuator,including smart grippers,crawling robots,and biomimetic flowers for visible humidity sensing,are demonstrated.More importantly,smart sweat-responsive wearables that automatically deform to promote sweat evaporation and convection during exercise are constructed based on the actuator,making it promising for adaptive personal thermal management.This work offers an easily processable,cost-effective,and environmentally benign strategy to construct moisture-responsive actuators for future eco-friendly smart devices.
基金Supported by the National Key Research and Development Program of China (Grant Nos.2016YFA0300300 and 2017YFA0303003)the National Natural Science Foundation of China (Grant Nos.12061131005,11834016 and 11888101)+1 种基金the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No.XDB25000000)the Strategic Priority Research Program and Key Research Program of Frontier Sciences of the Chinese Academy of Sciences (Grant Nos.QYZDY-SSW-SLH001)。
文摘The electronic and superconducting properties of Fe_(1-δ)Se single-crystal flakes grown hydrothermally are studied by the transport measurements under zero and high magnetic fields up to 38.5 T.The results contrast sharply with those previously reported for nematically ordered Fe Se by chemical-vapor-transport(CVT)growth.No signature of the electronic nematicity,but an evident metal-to-nonmetal crossover with increasing temperature,is detected in the normal state of the present hydrothermal samples.Interestingly,a higher superconducting critical temperature T_c of 13.2 K is observed compared to a suppressed T_c of 9 K in the presence of the nematicity in the CVT Fe Se.Moreover,the upper critical field in the zero-temperature limit is found to be isotropic with respect to the field direction and to reach a higher value of-42 T,which breaks the Pauli limit by a factor of 1.8.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.92065110,11674031,11974048,12074334)the National Basic Research Program of China(Grant Nos.2014CB920903 and 2013CB921701)。
文摘We study systematically the negative magnetoresistance(MR)effect in WTe_(2±α)flakes with different thicknesses and doping concentrations.The negative MR is sensitive to the relative orientation between electrical-/magnetic-field and crystallographic orientation of WTe_(2±α).The analysis proves that the negative MR originates from chiral anomaly and is anisotropic.Maximum entropy mobility spectrum is used to analyze the electron and hole concentrations in the flake samples.It is found that the negative MR observed in WTe_(2±α)flakes with low doping concentration is small,and the high doping concentration is large.The doping-induced disorder obviously inhibits the positive MR,so the negative MR can be more easily observed.In a word,we introduce disorder to suppress positive MR by doping,and successfully obtain the negative MR in WTe_(2±α)flakes with different thicknesses and doping concentrations,which indicates that the chiral anomaly effect in WTe_(2)is robust.
基金Project supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDC07010000)the National Natural Science Foundation of China(Grant Nos.11974324,U1832151,11804326,and 11904001)+2 种基金the National Key Research and Development Program of China(Grant No.2017YFA0403600)the Anhui Initiative Fund in Quantum Information Technologies(Grant No.AHY170000)the Fund from the Hefei Science Center,Chinese Academy of Sciences(Grant No.2020HSC-UE014).
文摘As an elemental semiconductor,tellurium has recently attracted intense interest due to its non-trivial band topology,and the resulted intriguing topological transport phenomena.In this study we report systematic electronic transport studies on tellurium flakes grown via a simple vapor deposition process.The sample is self-hole-doped,and exhibits typical weak localization behavior at low temperatures.Substantial negative longitudinal magnetoresistance under parallel magnetic field is observed over a wide temperature region,which is considered to share the same origin with that in tellurium bulk crystals,i.e.,the Weyl points near the top of valence band.However,with lowering temperature the longitudinal magnetoconductivity experiences a transition from parabolic to linear field dependency,differing distinctly from the bulk counterparts.Further analysis reveals that such a modulation of Weyl behaviors in this low-dimensional tellurium structure can be attributed to the enhanced inter-valley scattering at low temperatures.Our results further extend Weyl physics into a low-dimensional semiconductor system,which may find its potential application in designing topological semiconductor devices.
文摘Graphene flakes(GF)have been prepared and assessed as a material for improving flow in oil pipelines under the effect of an electric field.In particular,different amounts of GFs have been considered in order to determine the optimal flow conditions.The GFs were prepared from graphite foam,derived from the dehydration of sugar with a particle size of 500-600μm,which was dispersed in ethanol and exfoliated in a ball mill under a shear force.After 15 h of exfoliation,sonication,and subsequent high-speed centrifugation at 3000 rpm,irregular-shaped GFs of 50-140 nm were produced and characterized using scanning electron microscopy,X-ray diffractometry,atomic force microscopy,and Raman spectroscopy.The prepared graphene sheets have been found to display excellent morphology and good graphitic structure.Experiments on flow improvement were conducted using the central composite rotatable design method for three parameters:stimulation time(15,30,45,and 60 s),applied voltage(150,170,200,and 220 V),and concentration of the GFs(0,100,200,and 400 mg/L).The optimal conditions for improved crude oil flow were then determined using the STATISTICA and WinQSB software packages.The results have confirmed the effectiveness of the use of the prepared GFs as a flow improver for crude oil,where the flow improvement is essentially a result of a reduction in viscosity and suppression of friction in the crude oil system.
文摘Food diversification is a way to strengthen national food security, for example by reducing the dependence on wheat flour as a main raw material of various food products through the use of cassava flour. Cassava flour, a rich source of carbohydrates, can be used in the making of flakes. In this study, the Virgin coconut oil （VCO） waste flour was added in cassava flour to produce gluten-free cassava flour flakes with high dietary fiber contents. The six different formulas of flakes were used in this study with addition of 0% （control）, 10%, 20%, 30%, 40% and 50% coconut waste flour, respectively. Then, the chemical and microbiological characteristics of the flakes were measured. Based on the proximate data, both flours have a good quality. The microbiological analysis shows cassava flour and coconut waste flour have good sanitation and food safety. Results showed that flakes with 80% cassava flour and 20% coconut waste flour are gluten-free and contain 2.52% water, 2.27% ash, 14.40% fat, 4.50% protein, 76.31% carbohydrate, 8.56% dietary fiber. Therefore, it can be said that cassava flour flakes can serve as gluten-free and rich dietary fiber ready-to-eat food.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174439,11961141011,U2032204,and 12074039)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant Nos.XDB28000000 and XDB33030000)。
文摘Research interests in recent years have expanded into quantum materials that display novel magnetism incorporating strong correlations,topological effects,and dimensional crossovers.Fe_(3)GeTe_(2)represents such a twodimensional van der Waals platform exhibiting itinerant ferromagnetism with many intriguing properties.Up to date,most electronic transport studies on Fe_(3)GeTe_(2)have been limited to its anomalous Hall responses while the longitudinal counterpart(such as magnetoresistance)remains largely unexplored.Here,we report a few unusual transport behaviors on thin flakes of Fe_(3)GeTe_(2).Upon cooling to the base temperature,the sample develops a resistivity upturn that shows a crossover from a marginally-ln T to a-T^(1/2)dependence,followed by a lowertemperature deviation.Moreover,we observe a negative and non-saturating linear magnetoresistance when the magnetization is parallel or antiparallel to the external magnetic field.The slope of the linear magnetoresistance also shows a nonmonotonic temperature dependence.We deduce an anomalous contribution to the magnetoresistance at low temperatures with a scaling function proportional-HT^(1/2),as well as a temperature-independent linear term.Possible mechanisms that could account for our observations are discussed.
文摘The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experiments, and used to investigate the principal effects of the process parameters such as plasma density, electron temperature, surface temperature and time of growth on the size and structure of the plasma-grown graphene flakes. It was demonstrated that the higher growth temperatures result in larger graphene flakes reaching 5 μm, and simultaneously, lead to much lower density of the carbon atoms adsorbed on the flake surface. The low density of the carbon adatoms reduces the probability of the additional graphene layer nucleation on surface of growing flake, thus eventually resulting in the synthesis of the most valuable single-layered graphenes.
基金supported by National Natural Science Foundation of China (No. 21735005)the Science and Technology Program of Anhui Province (No. 1501041119)+1 种基金the Science and Technology Major Special Program of Anhui Province (No. 15CZZ04125)National Key Research and Development Plan of China (No. 2016YFD0800902-2)
文摘The use of laser-induced breakdown spectroscopy(LIBS) for the analysis of heavy metals in water samples is investigated. Some factors such as splashing, surface ripples, extinction of emitted intensity, and a shorter plasma lifetime will influence the results if the water sample is directly measured. In order to avoid these disadvantages and the ‘coffee-ring effect', hydrophilic graphite flakes with annular grooves were used for the first time to enrich and concentrate heavy metals in water samples before being analyzed by LIBS. The proposed method and procedure have been evaluated to concentrate and analyze cadmium, chromium, copper, nickel, lead,and zinc in a water sample. The correlation coefficients were all above 0.99. The detection limits of 0.029, 0.087, 0.012, 0.083, 0.125, and 0.049 mgl^(-1) for Cd, Cr, Cu, Ni, Pb, and Zn,respectively, were obtained in samples prepared in a laboratory. With this structure, the heavy metals homogeneously distribute in the annular groove and the relative standard deviations are all below 6%. This method is very convenient and suitable for online in situ analysis of heavy metals.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 90505007 and 10774061)
文摘To explore the mechanism of carbonyl iron flake composites for microwave complex permeability, this paper investigates the feature of the flakes. The shape anisotropy was certified by the results of the magnetization hysteresis loops and the Mossbauer spectra. Furthermore, the shape anisotropy was used to explain the origin of composite microwave performance, and the calculated results agree with the experiment. It is believed that the shape anisotropy dominates microwave complex permeability, and the natural resonance plays main role in flake.
基金financially supported by the National Natural Science Foundation of China(No.51972162)。
文摘Achieving thermal management composite material with isotropic thermal dissipation property by using an environmentally friendly and efficient method is one of the most challenging techniques as a traditional approach tending to form a horizontally arranged network within the polymer matrix or the preparation steps which are unduly cumbersome.What presented here is a closestack thermally conductive three-dimensional(3D)hybrid network structure prepared by a simple and green strategy that intercalating the modified aluminum oxide(m-Al_(2)O_(3))spheres of different sizes into the modified two-dimensional(2D)boron nitride(m-h-BN)flakes.An effective 3D network is created by the multi-dimensional fillers through volume exclusion and synergistic effects.The m-h-BN flakes facilitate in-plane heat transfer,while the variously sized m-Al_(2)O_(3)spheres insert into the gaps between adjacent m-h-BN flakes,which is conducive to the heat transfer in the out-of-plane direction.Additionally,strong interactions between the m-Al_(2)O_(3)and m-h-BN promote the effective heat flux inside the 3D hybrid network structure.The 3D hybrid composite displays favorable quasi-isotropic heat dissipation property(through-plane thermal conductivity of 2.2 W·m^(-1)·K^(-1)and in-plane thermal conductivity of 11.6 W·m^(-1)·K^(-1))in comparison with the single-filler composites.Furthermore,the hybrid-filler composite has excellent mechanical properties and thermal stability.The efficient heat dissipation capacity of the hybrid composite is further confirmed by a finite element simulation,which indicates that the sphere-flake hybrid structure possesses a higher thermal conductivity and faster thermal response performance than the single-filler system.The composite material has great potential in meeting the needs of emerging and advancing power systems.
基金financially supported by the National Key Research and Development Program of China(Nos.2018YFB0704400,2017YFB0406100)the National Nature Science Foundation of China(Nos.51671129,51971132,51501111,51471106)
文摘The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites(50 vol%)with different inclination angles were fabricated via flake powder metallurgy,and the results show that with increasing the size of Al particle from 25.6 to 50.7μm,the inclination angle of graphite flake decreases from 7.3°to 4.4°,while the in-plane thermal conductivity of composites increases from 473 to 555 Wm-1 K-1.Based on the rules of mixture,an effective model was established to qualify and quantify the relation between the inclination angle and the in-plane thermal conductivity of the corresponding composites.This model can also be applied to other flake particle-reinforced composites.
基金the National Natural Science Foundation of China(No.21671167)the Joint Open Fund of Jiangsu Collaborative Innovation Center for Ecological Building Material and Environmental Protection Equipments and Key Laboratory for Advanced Technology in Environmental Protection of Jiangsu Province(No.JH201847)the National Natural Science Foundation of China(No.51602277)。
文摘Ti3C2Tx,a most studied member of MXene family,shows promise as a candidate electrode for pseudocapacitor due to its electronic conductivity and hydrophilic surface.However,the unsatisfactory yield of Ti3C2Tx few-layer flakes significantly restricted it in real applications.Here,we proposed a simple solution to boost the yield of Ti3C2Tx few-layer flakes by decreasing precursor size.When using the small500 mesh Ti3AlC2 powders as raw material,high yield of 65%was successfully achieved.Moreover,the asreceived small flakes also exhibit an enhanced pseudocapacior performance owing to their excellent electrical conductivity,expanded inte rlayer space and more O content on the surface.This work not only sheds light on the cost effective mass production of Ti3C2Tx few-layer flakes,but also provides an efficient solution for the design of MXene electrodes with high pseudocapacior performance.
文摘The soft magnetic Fe-Si-B nanocrystalline/ amorphous flakes were fabricated by ball milling from the elemental powders and annealing the amorphous precursor, respectively. The microstructure, magnetic and microwave properties were evaluated by different synthesis methods. By computation, ball-milled Fe78Si13B9 flakes demonstrated potential appfication in absorption.
基金support from the Jiangsu Funding Program for Excellent Postdoctoral Talent,the National Natural Science Foundation of China(No.52372055)the Jiangsu Independent Innovation Fund Project of Agricultural Science and Technology(No.CX(21)3163).
文摘Transition metal oxides have attracted intense interest owing to their abundant physical and chemical properties.The controlled preparation of large-area,high-quality two-dimensional crystals is essential for revealing their inherent properties and realizing high-performance devices.However,fabricating two-dimensional(2D)transition metal oxides using a general approach still presents substantial challenges.Herein,we successfully achieve highly crystalline nickel oxide(NiO)flakes with a thickness as thin as 3.3 nm through the salt-assisted vapor-liquid-solid(VLS)growth method,which demonstrated exceptional stability under ambient conditions.To explore the great potential of the NiO crystal in this work,an artificial synapse based on the NiO-flake resistive switching(RS)layer is investigated.Short-term and long-term synaptic behaviors are obtained with external stimuli.The artificial synaptic performance provides the foundation of the neuromorphic application,including handwriting number recognition based on artificial neuron network(ANN)and the virtually unsupervised learning capability based on generative adversarial network(GAN).This pioneering work not only paves new paths for the synthesis of 2D oxides in the future but also demonstrates the substantial potential of oxides in the field of neuromorphic computing.
文摘A facile colloidal route to synthesize MoSe2 porous microspheres with diameters of 400-600 nm made up of MoSe2 monolayer flakes （-0.7 nm in thickness） is reported. The solvents trioctylamine （TOA） and oleylamine （OAM） are found to play important roles in the formation of MoSe2 microspheres, whereby TOA determines the three-dimensional （3D） microspherical morphology and OAM directs the formation of MoSes monolayer flakes. The robust 3D MoSe2 microspheres exhibit remarkable activity and durability for the electrocatalytic hydrogen evolution reaction （HER） in acid, maintaining a small onset overpotential of -77 mV and keeping a small overpotential of 100 mV for a current density of 5 mA/cm2 after 1,000 cycles. In addition, similar 3D WSe2 microspheres can also be prepared by using this method. We expect this facile colloidal route could further be expanded to synthesize other porous structures which will find applications in fields such as in energy storage, catalysis, and sensing.
