A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. Th...A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. The suggested filter uses a canonical number of passive components without requiring any component matching condition. The frequency responses simulation results of the proposed filter confirm the theoretical analysis.展开更多
In this paper,we present a novel first-order digitalΣΔconverter tailored for digital-to-analog applications,focusing on achieving both high yield and reduced silicon estate.Our approach incorporates a substantial le...In this paper,we present a novel first-order digitalΣΔconverter tailored for digital-to-analog applications,focusing on achieving both high yield and reduced silicon estate.Our approach incorporates a substantial level of dithering noise into the input signal,strategically aimed at mitigating the spurious frequencies commonly encountered in such converters.Validation of our design is performed through simulations using a high-level simulator specialized in mixed-signal circuit analysis.The results underscore the enhanced performance of our circuit,especially in reducing spurious frequencies,highlighting its efficiency and effectiveness.The final circuit exhibits an effective number of bits of 13.展开更多
Long-term responses of floating structures pose a great concern in their design phase. Existing approaches for addressing long-term extreme responses are extremely cumbersome for adoption. This work aims to develop an...Long-term responses of floating structures pose a great concern in their design phase. Existing approaches for addressing long-term extreme responses are extremely cumbersome for adoption. This work aims to develop an approach for the long-term extreme-response analysis of floating structures. A modified gradient-based retrieval algorithm in conjunction with the inverse first-order reliability method(IFORM) is proposed to enable the use of convolution models in long-term extreme analysis of structures with an analytical formula of response amplitude operator(RAO). The proposed algorithm ensures convergence stability and iteration accuracy and exhibits a higher computational efficiency than the traditional backtracking method. However, when the RAO of general offshore structures cannot be analytically expressed, the convolutional integration method fails to function properly. A numerical discretization approach is further proposed for offshore structures in the case when the analytical expression of the RAO is not feasible. Through iterative discretization of environmental contours(ECs) and RAOs, a detailed procedure is proposed to calculate the long-term response extremes of offshore structures. The validity and accuracy of the proposed approach are tested using a floating offshore wind turbine as a numerical example. The long-term extreme heave responses of various return periods are calculated via the IFORM in conjunction with a numerical discretization approach. The environmental data corresponding to N-year structural responses are located inside the ECs, which indicates that the selection of design points directly along the ECs yields conservative design results.展开更多
This study systematically investigated the influence of deposition rate on the structure,broadband opti⁃cal properties(1.0-13.0μm),and stress characteristics of Germanium(Ge)films.Additionally,a method for enhancing ...This study systematically investigated the influence of deposition rate on the structure,broadband opti⁃cal properties(1.0-13.0μm),and stress characteristics of Germanium(Ge)films.Additionally,a method for enhancing the performance of infrared filters based on rate-modulated deposition of Ge films was proposed.The optical absorption of Ge films in the short-wave infrared(SWIR)and long-wave infrared(LWIR)bands can be effectively reduced by modulating the deposition rate.As the deposition rate increases,the Ge films maintain an amorphous structure.The optical constants of the films in the 1.0-2.5μm and 2.5-13.0μm bands were precisely determined using the Cody-Lorentz model and the classical Lorentz oscillator model,respectively.Notably,high⁃er deposition rates result in a gradual increase in the refractive index.The extinction coefficient increases with the deposition rate in the SWIR region,attributed to the widening of the Urbach tail,while it decreases in the LWIR region due to the reduced absorption caused by the Ge-O stretching mode.Additionally,the films exhibit a tensile stress that decreases with increasing deposition rate.Finally,the effectiveness of the proposed fabrication method for an infrared filter with Ge films deposited at an optimized rate was demonstrated through practical examples.This work provides theoretical and technical support for the application of Ge films in high-performance infrared filters.展开更多
The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recogni...The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.展开更多
Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a c...Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a comprehensive comparative analysis of four Kalman filter variants Extended Kalman Filter(EKF),Extended Kalman-Bucy Filter(EKBF),Unscented Kalman Filter(UKF),and Unscented Kalman-Bucy Filter(UKBF)under varying battery parameter conditions.These include temperature fluctuation,self-discharge,current direction,cell capacity,process noise,and measurement noise.Our findings reveal significant variations in the performance of SOC and SOH predictions across filters,emphasizing that UKF demonstrates superior robustness to noise,while EKF performs better under accurate system dynamics.The study underscores the need for adaptive filtering strategies that can dynamically adjust to evolving battery parameters,thereby enhancing BMS reliability and extending battery lifespan.展开更多
1 Introduction Recently,the increasing demand for advanced telecommunication systems has spurred extensive research into bandpass filters(BPFs),with particular emphasis on miniaturization,reduction of insertion loss(I...1 Introduction Recently,the increasing demand for advanced telecommunication systems has spurred extensive research into bandpass filters(BPFs),with particular emphasis on miniaturization,reduction of insertion loss(IL),and enhancement of upper stopband rejection(Huang et al.,2021;Snyder et al.,2021;Lin et al.,2023;Zeng et al.,2023).展开更多
In this study,a fifth-degree cubature particle filter(5CPF)is proposed to address the limited estimation accuracy in traditional particle filter algorithms for bearings-only tracking(BOT).This algorithm calculates the...In this study,a fifth-degree cubature particle filter(5CPF)is proposed to address the limited estimation accuracy in traditional particle filter algorithms for bearings-only tracking(BOT).This algorithm calculates the recommended density function by introducing a fifth-degree cubature Kalman filter algorithm to guide particle sampling,which effectively alleviates the problem of particle degradation and significantly improves the estimation accuracy of the filter.However,the 5CPF algorithm exhibits high computational complexity,particularly in scenarios with a large number of particles.Therefore,we propose the extended Kalman filter(EKF)-5CPF algorithm,which employs an EKF to replace the time update step for each particle in the 5CPF.This enhances the algorithm’s real-time capability while maintaining the high precision advantage of the 5CPF algorithm.In addition,we construct bearing-only dual-station and single-motion station target tracking systems,and the filtering performances of 5CPF and EKF-5CPF algorithms under different conditions are analyzed.The results show that both the 5CPF algorithm and EKF-5CPF have strong robustness and can adapt to different noise environments.Furthermore,both algorithms significantly outperform traditional nonlinear filtering algorithms in terms of convergence speed,tracking accuracy,and overall stability.展开更多
A new current-mode first-order log-domain multifunction filter is presented in this paper. This filter has single input and provides three outputs (low-pass, high-pass and all-pass) using a first-order low-pass filter...A new current-mode first-order log-domain multifunction filter is presented in this paper. This filter has single input and provides three outputs (low-pass, high-pass and all-pass) using a first-order low-pass filter and five of current mirrors as building blocks. The proposed filter employs only MOSFETs and a grounded capacitor. The first-order filters are used in audio and video applications extensively. The MOSFETs of the core section are operated in weak inversion thereby making the circuit suitable for low-voltage, low-power applications. The SPICE simulations have shown good performance of the proposed filter.展开更多
Color filters are essential components for optical modulation.However,conventional filters are restricted to operating exclusively in either reflective or transmissive mode.Furthermore,they suffer from limited UV and ...Color filters are essential components for optical modulation.However,conventional filters are restricted to operating exclusively in either reflective or transmissive mode.Furthermore,they suffer from limited UV and thermal stability,low color purity,and exhibit identical coloration on both surfaces.Herein,we propose a novel design strategy for trans-reflective color filters by integrating the absorptive properties of dye-doped polysulfone(PSU)with the diffractive capabilities of photonic crystals.This composite filter achieved broad-spectrum transmission with deep color outputs—yellow(0.410,0.510),magenta(0.446,0.231),and cyan(0.201,0.425)—closely aligned with standard color space coordinates.By tuning the refractive index of CeO_(2)@SiO_(2)nanoparticles to match dye-based PSU matrix,the transmittance of filters exceeded 70%.Moreover,dye-mediated absorption reduces the scattering light,thereby enhancing reflection color purity(full width at half maxima(FWHM)=25 nm)and producing vibrant blue,green,and red hues.The incorporation of UV-absorbing CeO_(2)@SiO_(2)nanoparticles effectively mitigated dye photodegradation,yielding exceptional UV stability(ΔT<2%under prolonged UV exposure).The filters also exhibited outstanding thermal stability(ΔT<1%after 30 min heat treatment at 230°C).This work establishes a robust materials design framework for multifunctional optical filters,advancing the development of highfidelity dual-mode color systems for next-generation display technologies.展开更多
Recommendation systems are an integral and indispensable part of every digital platform,as they can suggest content or items to users based on their respective needs.Collaborative filtering is a technique often used i...Recommendation systems are an integral and indispensable part of every digital platform,as they can suggest content or items to users based on their respective needs.Collaborative filtering is a technique often used in various studies,which produces recommendations by analyzing similarities between users and items based on their behavior.Although often used,traditional collaborative filtering techniques still face the main challenge of sparsity.Sparsity problems occur when the data in the system is sparse,meaning that only a portion of users provide feedback on some items,resulting in inaccurate recommendations generated by the system.To overcome this problem,we developed aHybrid Collaborative Filtering model based onMatrix Factorization andGradient Boosting(HCF-MFGB),a new hybrid approach.Our proposed model integrates SVD++,the XGBoost ensemble learning algorithm,and utilizes user demographic data and meta items.We utilize information,both explicitly and implicitly,to learn user preference patterns using SVD++.The XGBoost algorithm is used to create hundreds of decision trees incrementally,thereby improving model accuracy.Meanwhile,user demographic and meta-item data are clustered using the K-Means Clustering algorithm to capture similarities in user and item characteristics.This combination is designed to improve rating prediction accuracy by reducing reliance on minimal explicit rating data,while addressing sparsity issues in movie recommendation systems.The results of experiments on the MovieLens 100K,MovieLens 1M,and CiaoDVD datasets show significant improvements,outperforming various other baselinemodels in terms of RMSE and MAE.On theMovieLens 100K dataset,the HCF-MFGB model obtained an RMSE value of 0.853 and an MAE value of 0.674.On theMovieLens 1M dataset,the HCF-MFGB model obtained an RMSE value of 0.763 and an MAE value of 0.61.On the CiaoDCD dataset,the HCF-MFGB model achieved an RMSE value of 0.718 and an MAE value of 0.495.These results confirm a significant improvement in movie recommendation accuracy with the proposed approach.展开更多
This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temp...This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.展开更多
This article proposes a generalized strongly coupled resonator quartet(GSCRQ)filter along with its synthesis approach.By introducing out-of-band reflection zeros(RZs),the proposed GSCRQ can generate a transmission zer...This article proposes a generalized strongly coupled resonator quartet(GSCRQ)filter along with its synthesis approach.By introducing out-of-band reflection zeros(RZs),the proposed GSCRQ can generate a transmission zero on each side of the passband without negative couplings.The coupling coefficients in this coupling structure change with the positions of the out-of-band RZs.Thus,the GSCRQ configuration admits flexible design solutions.For GSCRQ coaxial combline filters,all couplings can be implemented as inductive couplings,simplifying the design and manufacturing process.In this article,a 6-2 filter in the GSCRQ configuration is synthesized and designed.The simulated results of the designed filter agree very well with the theoretical characteristics.展开更多
Deep graph contrastive clustering has attracted widespread attentions due to its self-supervised representation learning paradigm and superior clustering performance.Although,two challenges emerge and result in high c...Deep graph contrastive clustering has attracted widespread attentions due to its self-supervised representation learning paradigm and superior clustering performance.Although,two challenges emerge and result in high computational costs.Most existing contrastive methods adopt the data augmentation and then representation learning strategy,where representation learning with trainable graph convolution is coupled with complex and fixed data augmentation,inevitably limiting the efficiency and flexibility.The similarity metric between positive-negative sample pairs is complex and contrastive objective is partial,limiting the discriminability of representation learning.To solve these challenges,a novel wide graph clustering network(WGCN)adhering to representation and then augmentation framework is proposed,which mainly consists of multiorder filter fusion(MFF)and double-level contrastive learning(DCL)modules.Specifically,the MFF module integrates multiorder low-pass filters to extract smooth and multi-scale topological features,utilizing self-attention fusion to reduce redundancy and obtain comprehensive embedding representation.Further,the DCL module constructs two augmented views by the parallel parameter-unshared Siamese encoders rather than complex augmentations on graph.To achieve simple yet effective self-supervised learning,representation self-supervision and structural consistency oriented double-level contrastive loss is designed,where representation self-supervision maximizes the agreement between pairwise augmented embedding representations and structural consistency promotes the mutual information correlation between appending neighborhoods with similar semantics.Extensive experiments on six benchmark datasets demonstrate the superiority of the proposed WGCN,especially highlighting its time-saving characteristic.The code could be available in the https://github.com/Tianxiang Zhao0474/WGCN.展开更多
Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection ...Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection control(LADRC)scheme is presented to cope with the difficulties,and a reduced-order observer scheme is proposed further.Some quantitative dynamic results with regard to non-overshoot characteristics are obtained.Finally,the performance boundaries of LADRC and PI control are explicitly compared with each other,which shows that the former is more superior in most cases.展开更多
Consensus problems of first-order multi-agent systems with multiple time delays are investigated in this paper. We discuss three cases： 1） continuous, 2） discrete, and 3） a continuous system with a proportional pl...Consensus problems of first-order multi-agent systems with multiple time delays are investigated in this paper. We discuss three cases： 1） continuous, 2） discrete, and 3） a continuous system with a proportional plus derivative controller. In each case, the system contains simultaneous communication and input time delays. Supposing a dynamic multi-agent system with directed topology that contains a globally reachable node, the sufficient convergence condition of the system is discussed with respect to each of the three cases based on the generalized Nyquist criterion and the frequency-domain analysis approach, yielding conclusions that are either less conservative than or agree with previously published results. We know that the convergence condition of the system depends mainly on each agent’s input time delay and the adjacent weights but is independent of the communication delay between agents, whether the system is continuous or discrete. Finally, simulation examples are given to verify the theoretical analysis.展开更多
The use of peat for the removal of nickel from aqueous solutions has been investigated at various pH values by means of static conditions. The present research shows that the ability of Ni to bind to peat increases as...The use of peat for the removal of nickel from aqueous solutions has been investigated at various pH values by means of static conditions. The present research shows that the ability of Ni to bind to peat increases as the pH value increases. The solutions reach adsorption equilibrium rapidly. A reasonable kinetic model, first-order in nickel concentration, has been developed and fitted to the adsorption of nickel （Ⅱ） onto peat. The first-order model provides a good correlation to the experimental data. The characteristic parameters of the Langmuir isotherm were determined at various temperatures. The relationship between kinetics and equilibrium isotherms was established through the forward- and backward-rate-constants, k~ and k2, and the equilibrium constant, K.展开更多
This paper introduces a novel approach for parameter sensitivity evaluation and efficient slope reliability analysis based on quantile-based first-order second-moment method(QFOSM).The core principles of the QFOSM are...This paper introduces a novel approach for parameter sensitivity evaluation and efficient slope reliability analysis based on quantile-based first-order second-moment method(QFOSM).The core principles of the QFOSM are elucidated geometrically from the perspective of expanding ellipsoids.Based on this geometric interpretation,the QFOSM is further extended to estimate sensitivity indices and assess the significance of various uncertain parameters involved in the slope system.The proposed method has the advantage of computational simplicity,akin to the conventional first-order second-moment method(FOSM),while providing estimation accuracy close to that of the first-order reliability method(FORM).Its performance is demonstrated with a numerical example and three slope examples.The results show that the proposed method can efficiently estimate the slope reliability and simultaneously evaluate the sensitivity of the uncertain parameters.The proposed method does not involve complex optimization or iteration required by the FORM.It can provide a valuable complement to the existing approximate reliability analysis methods,offering rapid sensitivity evaluation and slope reliability analysis.展开更多
A new model of a first-order composite beam with flexoelectric and piezomagnetic layers is developed.The new model is under a transverse magnetic field and can capture the couple stress and its flexoelectric effects.T...A new model of a first-order composite beam with flexoelectric and piezomagnetic layers is developed.The new model is under a transverse magnetic field and can capture the couple stress and its flexoelectric effects.The governing equations are obtained through a variational approach.To illustrate the new model,the static bending problem is analytically solved based on a Navier’s technique.The numerical results reveal that the extension,deflection,and shear deformation of the current or couple stress relevant flexoelectric model are always smaller than those of classical models at very small scale.It is also found that the electric potentials only appear with the presence of the flexoelectric effect for this non-piezoelectric composite beam model.Furthermore,various electric potential distributions can be manipulated by the particular magnetic fields,and remote/non-contact control at micro-and nano-scales can be realized by current functional composite beams.展开更多
A novel method for the determination of vitamin C（Vc） is proposed in this article. After the reaction with Folin-Ciocalteau reagent at ambient temperature, Vc solution was scanned at 750--1100 nm, and its first-orde...A novel method for the determination of vitamin C（Vc） is proposed in this article. After the reaction with Folin-Ciocalteau reagent at ambient temperature, Vc solution was scanned at 750--1100 nm, and its first-order derivative spectrum were obtained from the original spectrum. The values of derivative selected at 995 nm were used for determination. It was proved that Vc could quickly react with Folin-Ciocalteau reagent within 5 min and the product was quite stable for a long time. The conditions required for this method is not very complicated, its precision and accuracy are similar to those of the iodometric titration described in Chinese Pharmacopoeia, and the limit of detection is 0.312 μg/mL. The determination of the results of vitamin C tablet, pill, and injection demonstrates that this method has wide pharmaceutical applications.展开更多
文摘A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. The suggested filter uses a canonical number of passive components without requiring any component matching condition. The frequency responses simulation results of the proposed filter confirm the theoretical analysis.
文摘In this paper,we present a novel first-order digitalΣΔconverter tailored for digital-to-analog applications,focusing on achieving both high yield and reduced silicon estate.Our approach incorporates a substantial level of dithering noise into the input signal,strategically aimed at mitigating the spurious frequencies commonly encountered in such converters.Validation of our design is performed through simulations using a high-level simulator specialized in mixed-signal circuit analysis.The results underscore the enhanced performance of our circuit,especially in reducing spurious frequencies,highlighting its efficiency and effectiveness.The final circuit exhibits an effective number of bits of 13.
基金Supported by the National Natural Science Foundation of China (Grant Nos.52088102 and 51879287)National Key Research and Development Program of China (Grant No.2022YFB2602301)。
文摘Long-term responses of floating structures pose a great concern in their design phase. Existing approaches for addressing long-term extreme responses are extremely cumbersome for adoption. This work aims to develop an approach for the long-term extreme-response analysis of floating structures. A modified gradient-based retrieval algorithm in conjunction with the inverse first-order reliability method(IFORM) is proposed to enable the use of convolution models in long-term extreme analysis of structures with an analytical formula of response amplitude operator(RAO). The proposed algorithm ensures convergence stability and iteration accuracy and exhibits a higher computational efficiency than the traditional backtracking method. However, when the RAO of general offshore structures cannot be analytically expressed, the convolutional integration method fails to function properly. A numerical discretization approach is further proposed for offshore structures in the case when the analytical expression of the RAO is not feasible. Through iterative discretization of environmental contours(ECs) and RAOs, a detailed procedure is proposed to calculate the long-term response extremes of offshore structures. The validity and accuracy of the proposed approach are tested using a floating offshore wind turbine as a numerical example. The long-term extreme heave responses of various return periods are calculated via the IFORM in conjunction with a numerical discretization approach. The environmental data corresponding to N-year structural responses are located inside the ECs, which indicates that the selection of design points directly along the ECs yields conservative design results.
基金Supported by the National Natural Science Foundation of China(62275053,62275256)the National key Research and Development Program of China(2021YFB3701500)+1 种基金the Youth Innovation Promotion Association of the Chinese Academy of Sciences(2023248)the Eastern Talent Plan Youth Project 2022,the Shanghai Key Laboratory of Optical Coatings and Spectral Modulation(23dz2260500).
文摘This study systematically investigated the influence of deposition rate on the structure,broadband opti⁃cal properties(1.0-13.0μm),and stress characteristics of Germanium(Ge)films.Additionally,a method for enhancing the performance of infrared filters based on rate-modulated deposition of Ge films was proposed.The optical absorption of Ge films in the short-wave infrared(SWIR)and long-wave infrared(LWIR)bands can be effectively reduced by modulating the deposition rate.As the deposition rate increases,the Ge films maintain an amorphous structure.The optical constants of the films in the 1.0-2.5μm and 2.5-13.0μm bands were precisely determined using the Cody-Lorentz model and the classical Lorentz oscillator model,respectively.Notably,high⁃er deposition rates result in a gradual increase in the refractive index.The extinction coefficient increases with the deposition rate in the SWIR region,attributed to the widening of the Urbach tail,while it decreases in the LWIR region due to the reduced absorption caused by the Ge-O stretching mode.Additionally,the films exhibit a tensile stress that decreases with increasing deposition rate.Finally,the effectiveness of the proposed fabrication method for an infrared filter with Ge films deposited at an optimized rate was demonstrated through practical examples.This work provides theoretical and technical support for the application of Ge films in high-performance infrared filters.
文摘The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.
基金supported by the Royal Academy of Engineering,UK,in the scheme of Distinguished International Associate(DIA-2424-5-134).
文摘Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a comprehensive comparative analysis of four Kalman filter variants Extended Kalman Filter(EKF),Extended Kalman-Bucy Filter(EKBF),Unscented Kalman Filter(UKF),and Unscented Kalman-Bucy Filter(UKBF)under varying battery parameter conditions.These include temperature fluctuation,self-discharge,current direction,cell capacity,process noise,and measurement noise.Our findings reveal significant variations in the performance of SOC and SOH predictions across filters,emphasizing that UKF demonstrates superior robustness to noise,while EKF performs better under accurate system dynamics.The study underscores the need for adaptive filtering strategies that can dynamically adjust to evolving battery parameters,thereby enhancing BMS reliability and extending battery lifespan.
基金supported by the National Natural Science Foundation of China(No.62371263)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.SJCK25_1995).
文摘1 Introduction Recently,the increasing demand for advanced telecommunication systems has spurred extensive research into bandpass filters(BPFs),with particular emphasis on miniaturization,reduction of insertion loss(IL),and enhancement of upper stopband rejection(Huang et al.,2021;Snyder et al.,2021;Lin et al.,2023;Zeng et al.,2023).
基金Supported by the Guangxi Special Program for Technological Innovation Guidance(No.GuiKeAC25069006).
文摘In this study,a fifth-degree cubature particle filter(5CPF)is proposed to address the limited estimation accuracy in traditional particle filter algorithms for bearings-only tracking(BOT).This algorithm calculates the recommended density function by introducing a fifth-degree cubature Kalman filter algorithm to guide particle sampling,which effectively alleviates the problem of particle degradation and significantly improves the estimation accuracy of the filter.However,the 5CPF algorithm exhibits high computational complexity,particularly in scenarios with a large number of particles.Therefore,we propose the extended Kalman filter(EKF)-5CPF algorithm,which employs an EKF to replace the time update step for each particle in the 5CPF.This enhances the algorithm’s real-time capability while maintaining the high precision advantage of the 5CPF algorithm.In addition,we construct bearing-only dual-station and single-motion station target tracking systems,and the filtering performances of 5CPF and EKF-5CPF algorithms under different conditions are analyzed.The results show that both the 5CPF algorithm and EKF-5CPF have strong robustness and can adapt to different noise environments.Furthermore,both algorithms significantly outperform traditional nonlinear filtering algorithms in terms of convergence speed,tracking accuracy,and overall stability.
文摘A new current-mode first-order log-domain multifunction filter is presented in this paper. This filter has single input and provides three outputs (low-pass, high-pass and all-pass) using a first-order low-pass filter and five of current mirrors as building blocks. The proposed filter employs only MOSFETs and a grounded capacitor. The first-order filters are used in audio and video applications extensively. The MOSFETs of the core section are operated in weak inversion thereby making the circuit suitable for low-voltage, low-power applications. The SPICE simulations have shown good performance of the proposed filter.
基金supported by the Program of the National Natural Science Foundation of China(22238002)the Fundamental Research Funds for the Central Universities(DUT22-LAB610)Research and Innovation Team Project of Dalian University of Technology(DUT2022TB10).
文摘Color filters are essential components for optical modulation.However,conventional filters are restricted to operating exclusively in either reflective or transmissive mode.Furthermore,they suffer from limited UV and thermal stability,low color purity,and exhibit identical coloration on both surfaces.Herein,we propose a novel design strategy for trans-reflective color filters by integrating the absorptive properties of dye-doped polysulfone(PSU)with the diffractive capabilities of photonic crystals.This composite filter achieved broad-spectrum transmission with deep color outputs—yellow(0.410,0.510),magenta(0.446,0.231),and cyan(0.201,0.425)—closely aligned with standard color space coordinates.By tuning the refractive index of CeO_(2)@SiO_(2)nanoparticles to match dye-based PSU matrix,the transmittance of filters exceeded 70%.Moreover,dye-mediated absorption reduces the scattering light,thereby enhancing reflection color purity(full width at half maxima(FWHM)=25 nm)and producing vibrant blue,green,and red hues.The incorporation of UV-absorbing CeO_(2)@SiO_(2)nanoparticles effectively mitigated dye photodegradation,yielding exceptional UV stability(ΔT<2%under prolonged UV exposure).The filters also exhibited outstanding thermal stability(ΔT<1%after 30 min heat treatment at 230°C).This work establishes a robust materials design framework for multifunctional optical filters,advancing the development of highfidelity dual-mode color systems for next-generation display technologies.
基金funded by the Directorate General of Research and Development,Ministry of Higher Education,Science and Technology of the Republic of Indonesia,with grant number 2.6.63/UN32.14.1/LT/2025.
文摘Recommendation systems are an integral and indispensable part of every digital platform,as they can suggest content or items to users based on their respective needs.Collaborative filtering is a technique often used in various studies,which produces recommendations by analyzing similarities between users and items based on their behavior.Although often used,traditional collaborative filtering techniques still face the main challenge of sparsity.Sparsity problems occur when the data in the system is sparse,meaning that only a portion of users provide feedback on some items,resulting in inaccurate recommendations generated by the system.To overcome this problem,we developed aHybrid Collaborative Filtering model based onMatrix Factorization andGradient Boosting(HCF-MFGB),a new hybrid approach.Our proposed model integrates SVD++,the XGBoost ensemble learning algorithm,and utilizes user demographic data and meta items.We utilize information,both explicitly and implicitly,to learn user preference patterns using SVD++.The XGBoost algorithm is used to create hundreds of decision trees incrementally,thereby improving model accuracy.Meanwhile,user demographic and meta-item data are clustered using the K-Means Clustering algorithm to capture similarities in user and item characteristics.This combination is designed to improve rating prediction accuracy by reducing reliance on minimal explicit rating data,while addressing sparsity issues in movie recommendation systems.The results of experiments on the MovieLens 100K,MovieLens 1M,and CiaoDVD datasets show significant improvements,outperforming various other baselinemodels in terms of RMSE and MAE.On theMovieLens 100K dataset,the HCF-MFGB model obtained an RMSE value of 0.853 and an MAE value of 0.674.On theMovieLens 1M dataset,the HCF-MFGB model obtained an RMSE value of 0.763 and an MAE value of 0.61.On the CiaoDCD dataset,the HCF-MFGB model achieved an RMSE value of 0.718 and an MAE value of 0.495.These results confirm a significant improvement in movie recommendation accuracy with the proposed approach.
文摘This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.
基金supported by the National Natural Science Foundation of China under Grant No.62471366。
文摘This article proposes a generalized strongly coupled resonator quartet(GSCRQ)filter along with its synthesis approach.By introducing out-of-band reflection zeros(RZs),the proposed GSCRQ can generate a transmission zero on each side of the passband without negative couplings.The coupling coefficients in this coupling structure change with the positions of the out-of-band RZs.Thus,the GSCRQ configuration admits flexible design solutions.For GSCRQ coaxial combline filters,all couplings can be implemented as inductive couplings,simplifying the design and manufacturing process.In this article,a 6-2 filter in the GSCRQ configuration is synthesized and designed.The simulated results of the designed filter agree very well with the theoretical characteristics.
基金supported by the National Natural Science Foundation of China(62225303,62403043,62433004)the Beijing Natural Science Foundation(4244085)+1 种基金the Postdoctoral Fellowship Program of China Postdoctoral Science Foundation(GZC20230203)the China Postdoctoral Science Foundation(2023M740201)。
文摘Deep graph contrastive clustering has attracted widespread attentions due to its self-supervised representation learning paradigm and superior clustering performance.Although,two challenges emerge and result in high computational costs.Most existing contrastive methods adopt the data augmentation and then representation learning strategy,where representation learning with trainable graph convolution is coupled with complex and fixed data augmentation,inevitably limiting the efficiency and flexibility.The similarity metric between positive-negative sample pairs is complex and contrastive objective is partial,limiting the discriminability of representation learning.To solve these challenges,a novel wide graph clustering network(WGCN)adhering to representation and then augmentation framework is proposed,which mainly consists of multiorder filter fusion(MFF)and double-level contrastive learning(DCL)modules.Specifically,the MFF module integrates multiorder low-pass filters to extract smooth and multi-scale topological features,utilizing self-attention fusion to reduce redundancy and obtain comprehensive embedding representation.Further,the DCL module constructs two augmented views by the parallel parameter-unshared Siamese encoders rather than complex augmentations on graph.To achieve simple yet effective self-supervised learning,representation self-supervision and structural consistency oriented double-level contrastive loss is designed,where representation self-supervision maximizes the agreement between pairwise augmented embedding representations and structural consistency promotes the mutual information correlation between appending neighborhoods with similar semantics.Extensive experiments on six benchmark datasets demonstrate the superiority of the proposed WGCN,especially highlighting its time-saving characteristic.The code could be available in the https://github.com/Tianxiang Zhao0474/WGCN.
基金supported by the National Natural Science Foundation of China(60774088)the National High Technology Research and Development Program of China(863 Program)(2009AA04Z132)the Specialized Research Fund for the Doctoral Program of Higher Education of China(20090031110029)
文摘Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection control(LADRC)scheme is presented to cope with the difficulties,and a reduced-order observer scheme is proposed further.Some quantitative dynamic results with regard to non-overshoot characteristics are obtained.Finally,the performance boundaries of LADRC and PI control are explicitly compared with each other,which shows that the former is more superior in most cases.
基金Project supported in part by the National Natural Science Foundation of China (Grant Nos. 60973114 and 61170249)in part by the Natural Science Foundation of CQCSTC (Grant Nos. 2009BA2024 and cstc2011jjA1320)in part by the State Key Laboratory of Power Transmission Equipment & System Securityand New Technology, Chongqing University (Grant No. 2007DA10512711206)
文摘Consensus problems of first-order multi-agent systems with multiple time delays are investigated in this paper. We discuss three cases： 1） continuous, 2） discrete, and 3） a continuous system with a proportional plus derivative controller. In each case, the system contains simultaneous communication and input time delays. Supposing a dynamic multi-agent system with directed topology that contains a globally reachable node, the sufficient convergence condition of the system is discussed with respect to each of the three cases based on the generalized Nyquist criterion and the frequency-domain analysis approach, yielding conclusions that are either less conservative than or agree with previously published results. We know that the convergence condition of the system depends mainly on each agent’s input time delay and the adjacent weights but is independent of the communication delay between agents, whether the system is continuous or discrete. Finally, simulation examples are given to verify the theoretical analysis.
基金Projects [2006]331 supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars070712 by the Key Laboratory ofNuclear Resources and Environment,Ministry of Education of China
文摘The use of peat for the removal of nickel from aqueous solutions has been investigated at various pH values by means of static conditions. The present research shows that the ability of Ni to bind to peat increases as the pH value increases. The solutions reach adsorption equilibrium rapidly. A reasonable kinetic model, first-order in nickel concentration, has been developed and fitted to the adsorption of nickel （Ⅱ） onto peat. The first-order model provides a good correlation to the experimental data. The characteristic parameters of the Langmuir isotherm were determined at various temperatures. The relationship between kinetics and equilibrium isotherms was established through the forward- and backward-rate-constants, k~ and k2, and the equilibrium constant, K.
基金supported by the National Natural Science Foundation of China(Grant Nos.52109144,52025094 and 52222905).
文摘This paper introduces a novel approach for parameter sensitivity evaluation and efficient slope reliability analysis based on quantile-based first-order second-moment method(QFOSM).The core principles of the QFOSM are elucidated geometrically from the perspective of expanding ellipsoids.Based on this geometric interpretation,the QFOSM is further extended to estimate sensitivity indices and assess the significance of various uncertain parameters involved in the slope system.The proposed method has the advantage of computational simplicity,akin to the conventional first-order second-moment method(FOSM),while providing estimation accuracy close to that of the first-order reliability method(FORM).Its performance is demonstrated with a numerical example and three slope examples.The results show that the proposed method can efficiently estimate the slope reliability and simultaneously evaluate the sensitivity of the uncertain parameters.The proposed method does not involve complex optimization or iteration required by the FORM.It can provide a valuable complement to the existing approximate reliability analysis methods,offering rapid sensitivity evaluation and slope reliability analysis.
基金This work was supported by the National Natural Science Foundation of China(Grants 12002086 and 12072253).
文摘A new model of a first-order composite beam with flexoelectric and piezomagnetic layers is developed.The new model is under a transverse magnetic field and can capture the couple stress and its flexoelectric effects.The governing equations are obtained through a variational approach.To illustrate the new model,the static bending problem is analytically solved based on a Navier’s technique.The numerical results reveal that the extension,deflection,and shear deformation of the current or couple stress relevant flexoelectric model are always smaller than those of classical models at very small scale.It is also found that the electric potentials only appear with the presence of the flexoelectric effect for this non-piezoelectric composite beam model.Furthermore,various electric potential distributions can be manipulated by the particular magnetic fields,and remote/non-contact control at micro-and nano-scales can be realized by current functional composite beams.
基金Natural Science Foundation of Jilin Province, China(No.200305502)
文摘A novel method for the determination of vitamin C（Vc） is proposed in this article. After the reaction with Folin-Ciocalteau reagent at ambient temperature, Vc solution was scanned at 750--1100 nm, and its first-order derivative spectrum were obtained from the original spectrum. The values of derivative selected at 995 nm were used for determination. It was proved that Vc could quickly react with Folin-Ciocalteau reagent within 5 min and the product was quite stable for a long time. The conditions required for this method is not very complicated, its precision and accuracy are similar to those of the iodometric titration described in Chinese Pharmacopoeia, and the limit of detection is 0.312 μg/mL. The determination of the results of vitamin C tablet, pill, and injection demonstrates that this method has wide pharmaceutical applications.
