Hydrogen incorporation is critical for explaining defect energies, structure parameters and other physical characteristics of minerals and understanding mantle dynamics. This work analyzed the hydrogen complex defects...Hydrogen incorporation is critical for explaining defect energies, structure parameters and other physical characteristics of minerals and understanding mantle dynamics. This work analyzed the hydrogen complex defects in jadeite by the plane-wave pseudo-potential method based on density functional theory, and optimized the atomic positions and lattice constants in all configurations （different defective systems）. Incorporation mechanisms considered for hydrogen （H） in jadeite include： （1） hydrogen incorporating with the 02 site oxygen and coexisting with M2 vacancy; （2） one H atom combined with an AI atom replacing Si in tetrahedron; （3） 4H atoms directly replacing Si in tetrahedron and （4） 3H atoms replacing Al on the M1 site. The four incorporation mechanisms mentioned above form the corresponding VNa-Hi, Alsi-Hi, Vsi-4Hi and VAr3Hi point defects. The molecular dynamics simulation to the ideal, VNa-Hi, Alsi-Hi, Vsi-4Hi and VAr3Hi point defects under the P-T conditions of 900 K, 2 GPa, the Vsa-Hi and Alsi-Hi point defects under different pressures at T = 900 K, and Alsj-Hj point defects under different temperatures at P = 3 GPa was performed to examine the preferential mode of hydrogen incorporation in jadeite by means of first-principles calculations. The calculations show that the averaged O-H bond-length in the hydrogen point defects system decreased in the order of Alsi-Hi, VNa-HI, Vsl-4Hf and VAI-3Hi. VNa-HI complex defects result in a contraction of the jadeite volume and the presence of Alsi-Hi, Vsi-4H~ and VAI-3Hi defects could increase the superceli volume, which is the most obvious in the VAt-3Hi defects. The energy of formation of Also-HI and VA[-3HI complex defects was much lower than that of other defect systems. The VAI-3Hi defects system has the lowest energy and the shortest O-H bond-length, suggesting that this system is the most favorable. The analytical results of vacancy formation energy, O-H bond- length, and the stability of the hydrogen defects in jadeite have suggested that the preferred hydration incorporation mode in jadeite is VAI-3Hi complex defect.展开更多
The global greenhouse effect makes it urgent to deal with the increasing greenhouse gases. In this paper the performance of MgO-decorated carbon nanotubes for CO2 adsorption is investigated through first principles ca...The global greenhouse effect makes it urgent to deal with the increasing greenhouse gases. In this paper the performance of MgO-decorated carbon nanotubes for CO2 adsorption is investigated through first principles calculations. The results show that the MgO-decorated carbon nanotubes can adsorb CO2 well and are relatively insensitive to O2 and N2 at the same time. The binding energy arrives at 1.18 eV for the single-MgO-decorated carbon nanotube adsorbing one CO2 molecule, while the corresponding values for O2 and N2 are 0.55 eV and 0.06 eV, respectively. In addition, multi-molecule adsorption is also proved to be very satisfactory. These results indicate that MgO-decorated carbon nanotubes have great potential applications in industrial and environmental processes.展开更多
Low dimensional materials are suitable candidates applying in next-generation high-performance electronic,optoelectronic,and energy storage devices because of their uniquely physical and chemical properties.In particu...Low dimensional materials are suitable candidates applying in next-generation high-performance electronic,optoelectronic,and energy storage devices because of their uniquely physical and chemical properties.In particular,one-dimensional(1D)atomic wires(AWs)exfoliating from 1D van der Waals(vdW)bulks are more promising in next generation nanometer(nm)even sub-nm device applications owing to their width of few-atoms scale and free dandling bonds states.Although several 1D AWs have been experimentally prepared,few 1D AW candidates could be practically applied in devices owing to lack of enough suitable 1D AWs.Herein,367 kinds of 1D AWs have been screened and the corresponding computational database including structures,electronic structures,magnetic states,and stabilities of these 1D AWs has been organized and established.Among these systems,unary and binary 1D AWs with relatively small exfoliation energy are thermodynamically stable and theoretically feasible to be exfoliated.More significantly,rich quantum states emerge,such as 1D semiconductors,1D metals,1D semimetals,and 1D magnetism.This database will offer an ideal platform to further explore exotic quantum states and exploit practical device applications using 1D materials.The database are openly available at http://www.dx.doi.org/10.11922/sciencedb.j00113.00004.展开更多
Sulfide nanocrystals and their composites have shown great potential in the thermoelectric(TE)field due to their extremely low thermal conductivity.Recently a solid and hollow metastable Au2S nanocrystalline has been ...Sulfide nanocrystals and their composites have shown great potential in the thermoelectric(TE)field due to their extremely low thermal conductivity.Recently a solid and hollow metastable Au2S nanocrystalline has been successfully synthesized.Herein,we study the TE properties of this bulk Au2S by first-principles calculations and semiclassical Boltzmann transport theory,which provides the basis for its further experimental studies.Our results indicate that the highly twofold degeneracy of the bands appears at theΓpoint in the Brillouin zone,resulting in a high Seebeck coefficient.Besides,Au2S exhibits an ultra-low lattice thermal conductivity(~0.88 W·m^-1·K^-1 at 700 K).At 700 K,the thermoelectric figure of merit of the optimal p-type doping is close to 1.76,which is higher than 0.8 of ZrSb at 700 K and 1.4 of PtTe at 750 K.Our work clearly demonstrates the advantages of Au2S as a TE material and would greatly inspire further experimental studies and verifications.展开更多
The structural, anisotropic elastic properties and the ideal compressive and tensile strengths of titanium diboride (TiB_(2)) were investigated using first-principles calculations based on density functional theory. T...The structural, anisotropic elastic properties and the ideal compressive and tensile strengths of titanium diboride (TiB_(2)) were investigated using first-principles calculations based on density functional theory. The stress-strain relationships of TiB2 under 〈10i0〉, 〈12i0〉, and 〈0001〉 compressive loads were calculated. Our results showed that the ideal uniaxial compressive strengths are |σ〈02i0〉)| = 142.96 GPa, |σ〈0001〉 ] = 188.75 GPa, and |σ〈10i0〉| = 245.33 GPa, at strains -0.16, -0.32, and -0.24, respectively. The variational trend is just the opposite to that of the ideal tensile strength with σ〈10i0〉 = 44.13 GPa, σ〈0001〉 = 47.03 GPa, and σ〈i2i0〉 = 56.09 GPa, at strains 0.14, 0.28, and 0.22, respectively. Furthermore, it was found that TiB2 is much stronger under compression than in tension. The ratios of the ideal compressive to tensile strengths are 5.56, 2.55, and 4.01 for crystallographic directions (10i0), 〈12i0〉, and 〈0001〉, respectively. The present results are in excellent agreement with the most recent experimental data and should be helpful to the understanding of the compressive property of TiB2.展开更多
We investigated the adsorption mechanisms including physical and chemical adsorption for heavy metals(Cd,Pb,Zn,Co,Cu)on C-lignin using density functional theory(DFT)simulations.Physical adsorption,involving metal atom...We investigated the adsorption mechanisms including physical and chemical adsorption for heavy metals(Cd,Pb,Zn,Co,Cu)on C-lignin using density functional theory(DFT)simulations.Physical adsorption,involving metal atoms near carbon atoms,is found to be endothermic;meanwhile,chemical adsorption,where hydroxyl groups replace metal ions,is exothermic and spontaneous.Pb exhibits the highest physical adsorption potential,while Cu and Co demonstrate the strongest chemical adsorption due to their highly negative adsorption energies.These findings provide valuable insights into the design of eco-friendly nano lignocellulosic composite films for effective heavy metal removal from contaminated water sources.Key words:C-lignin;adsorption;We investigated the adsorption mechanisms including physical and chemical adsorption for heavy metals(Cd,Pb,Zn,Co,Cu)on C-lignin using density functional theory(DFT)simulations.Physical adsorption,involving metal atoms near carbon atoms,is found to be endothermic;meanwhile,chemical adsorption,where hydroxyl groups replace metal ions,is exothermic and spontaneous.Pb exhibits the highest physical adsorption potential,while Cu and Co demonstrate the strongest chemical adsorption due to their highly negative adsorption energies.These findings provide valuable insights into the design of eco-friendly nano lignocellulosic composite films for effective heavy metal removal from contaminated water sources.展开更多
By adopting stochastic density functional theory(SDFT)and mixed stochastic-deterministic density functional theory(MDFT)methods,we perform first-principles calculations to predict the shock Hugoniot curves of boron(pr...By adopting stochastic density functional theory(SDFT)and mixed stochastic-deterministic density functional theory(MDFT)methods,we perform first-principles calculations to predict the shock Hugoniot curves of boron(pressure P=7.9×10^(3)-1.6×10^(6) GPa and temperature T=25-2800 eV),silicon(P=2.6×10^(3)-7.9×10^(5) GPa and T=21.5-1393 eV),and aluminum(P=5.2×10^(3)-9.0×10^(5) GPa and T=25-1393 eV)over wide ranges of pressure and temperature.In particular,we systematically investigate the impact of different cutoff radii in norm-conserving pseudopotentials on the calculated properties at elevated temperatures,such as pressure,ionization energy,and equation of state.By comparing the SDFT and MDFT results with those of other first-principles methods,such as extended first-principles molecular dynamics and path integral Monte Carlo methods,we find that the SDFT and MDFT methods show satisfactory precision,which advances our understanding of first-principles methods when applied to studies of matter at extremely high pressures and temperatures.展开更多
In this study the pseudo-potential method is used to investigate the structural, electronic, and thermodynamic proper- ties of ZnOl_xSx semiconductor materials. The results show that the electronic properties are foun...In this study the pseudo-potential method is used to investigate the structural, electronic, and thermodynamic proper- ties of ZnOl_xSx semiconductor materials. The results show that the electronic properties are found to be improved when calculated by using LDA ~ U functional as compared with local density approximation （LDA）. At various concentrations the ground-state properties are determined for bulk materials ZnO, ZnS, and their tertiary alloys in cubic zinc-blende phase. From the results, a minor difference is observed between the lattice parameters from Vegard＇s law and other calculated results, which may be due to the large mismatch between lattice parameters of binary compounds ZnO and ZnS. A small deviation in the bulk modulus from linear concentration dependence is also observed for each of these alloys. The ther- modynamic properties, including the phonon contribution to Helmholtz free energy △F, phonon contribution to internal energy △E, and specific iheat at constant-volume Cv, are calculated within quasi-harmonic approximation based on the calculated phonon dispersion relations.展开更多
The plane wave pseudo-potential method was used to investigate the structural, electronic, and elastic properties of Cd Se_（1-x）Te_x in the zinc blende phase. It is observed that the electronic properties are improv...The plane wave pseudo-potential method was used to investigate the structural, electronic, and elastic properties of Cd Se_（1-x）Te_x in the zinc blende phase. It is observed that the electronic properties are improved considerably by using LDA ＋ U as compared to the LDA approach. The calculated lattice constants and bulk moduli are also comparable to the experimental results. The cohesive energies for pure Cd Se and Cd Te binary and their mixed alloys are calculated. The second-order elastic constants are also calculated by the Lagrangian theory of elasticity. The elastic properties show that the studied material has a ductile nature.展开更多
The structural, electronic and elastic properties of common intermetallic compounds in FeTiCoNiVCrMnCuAI system high entropy alloy were investigated by the first principles calculation. The calculation results of form...The structural, electronic and elastic properties of common intermetallic compounds in FeTiCoNiVCrMnCuAI system high entropy alloy were investigated by the first principles calculation. The calculation results of formation enthalpy and cohesive energy show that FeTi, Fe2Ti, AlCrFe2, Co2Ti, AlMn2V and Mn2Ti phases may form in the formation process of the alloy. Further studies show that FeTi, FezTi, AlCrFe2, Co2Ti and AlMn2V phases with higher shear modulus and elastic modulus would be excellent strengthening phases in high entropy alloy and would improve the hardness of the alloy. In addition, the partial density of states was investigated for revealing the bonding mode, and the analyses on the strength of p-d hybridization also reveal the underlying mechanism for the elastic properties of these compounds.展开更多
The mechanical properties,thermodynamic properties and electronic structure of Mo1-xTax(Mo-Ta)alloys(x=0,0.0625,0.125,0.25,0.3125,0.5 and 1)were calculated by using firstprinciples.The electronic structure of Mo-Ta al...The mechanical properties,thermodynamic properties and electronic structure of Mo1-xTax(Mo-Ta)alloys(x=0,0.0625,0.125,0.25,0.3125,0.5 and 1)were calculated by using firstprinciples.The electronic structure of Mo-Ta alloys was analysed by the projected density of states(PDOS).The low temperature heat capacity was estimated by Fermi energy and Debye temperature.It is shown that the formation enthalpy will decrease with the increase of Ta content,and the cohesive energy will increase with the increase of the Ta content.On the other hand,the addition of Ta atoms will reduce the strength and improve the ductility of Mo-Ta alloys,the Debye temperature will decrease and the low temperature heat capacity will be improved with the increase of the Ta content.All these results will be useful for the research of new plasma grid(PG)materials,which is mainly used in neutral beam injection(NBI)systems to produce negative hydrogen ions.展开更多
An important challenge facing K-ion batteries lies in exploring earth-abundant and safe cathode materials that can provide high capacity with high migration rate of K ions.Here,we propose a simple and efficient method...An important challenge facing K-ion batteries lies in exploring earth-abundant and safe cathode materials that can provide high capacity with high migration rate of K ions.Here,we propose a simple and efficient method for searching potential K cathode materials with first principles calculations.Our screening is based on combinations of weight capacity,K ion occupation ratio,volume change per K,and valence limit.With this screening method we predicted a series of potential K ions cathodes with favorable electrochemical performance,such as K_(2)VPO_(4)CO_(3)-like structures with 1 D diffusion channels,3 D channel structures K_(2)CoSiO_(4),layered materials KCoO_(2),KCrO_(2),KVF_(4) and K_(5)V_(3)F_(14),and others.These potential cathodes have small volume changes,suitable voltage,and high capacity,with small diffusion barriers.They may be useful in K-ion batteries with high energy density and rate performance.展开更多
Recently,metal-graphene nanocomposite system has aroused much interest due to its radiation tolerance behavior.However,the related atomic mechanism for the metal-graphene interface is still unknown.Further,stainless s...Recently,metal-graphene nanocomposite system has aroused much interest due to its radiation tolerance behavior.However,the related atomic mechanism for the metal-graphene interface is still unknown.Further,stainless steels with Fe as main matrix are widely used in nuclear systems.Therefore,in this study,the atomic behaviors of point defects and helium(He) atoms at the Fe(110)-graphene interface are investigated systematically by first principles calculations.The results indicate that graphene interacts strongly with the Fe(110) substrate.In comparison with those of the original graphene and bulk Fe,the formation energy values of C vacancies and Fe point defects decrease significantly for Fe(110)-graphene.However,as He atoms have a high migration barrier and large binding energy at the interface,they are trapped at the interface once they enter into it.These theoretical results suggest that the Fe(110)-graphene interface acts as a strong sink that traps defects,suggesting the potential usage of steel-graphene with multiply interface structures for tolerating the radiation damage.展开更多
Via the first principles calculations, we predict that Cu doped graphene oxide （GO） is a much better nanocatalyst in terms of activity and feasibility. The high activity of Cu doped graphene oxides may be attributed...Via the first principles calculations, we predict that Cu doped graphene oxide （GO） is a much better nanocatalyst in terms of activity and feasibility. The high activity of Cu doped graphene oxides may be attributed to the charge transfer between the GO and Cu atom, resulting in an activated Cu atom. In the ER mechanism, the CO molecules directly react with the activated O2, then forming a metastable carbonate-like intermediate state （OOCO）. The reaction may proceed via two reaction paths of OOCO → CO2 ＋ O and CO ＋ OOCO → 2CO2, respectively. The calculated results show that the latter path is relatively more thermodynamically favorable with a modest energy barrier, so it should be more preferred. We expect our theoretical predictions to open a new avenue to fabricate carbon-based catalysts for CO oxidation with lower cost and higher activity.展开更多
We present a first-principles study on the geometric, vibrational and electronic properties of a novel Y-based non-scandium mixed-metal nitride clusterfullerene （TiY2N@C80）. Theoretical results indicate that the fun...We present a first-principles study on the geometric, vibrational and electronic properties of a novel Y-based non-scandium mixed-metal nitride clusterfullerene （TiY2N@C80）. Theoretical results indicate that the fundamental electronic properties of TiY2N@C80 are similar to that of TiSc2N@C80, but dramatically different from that of ScaN@C800 and YaN@C80 molecules. We find that the magnetism of TiY2N@C80 is quenched by carrier doping. The rotation energy barrier of the TiY2N cluster in C80 cage was obviously increased by exohedral chemical modification with pyrrolidine monoadduct.展开更多
An investigation of electronic property and high pressure phase stability of SmN has been conducted using first principles calculations based on density functional theory. The elec- tronic properties of Stun show a st...An investigation of electronic property and high pressure phase stability of SmN has been conducted using first principles calculations based on density functional theory. The elec- tronic properties of Stun show a striking feature of a half metal, the majority-spin electrons are metallic and the minority-spin electrons are semiconducting. It was found that Stun undergoes a pressure-induced phase transition from NaCl-type （B1） to CsCl-type structure （B2） at 117 GPa. The elastic constants of Stun satisfy Born conditions at ambient pressure, indicating that B1 phase of SmN is mechanically stable at 0 GPa. The result of phonon spectra shows that B1 structure is dynamically stable at ambient pressure, which agrees with the conclusion derived from the elastic constants.展开更多
To maximize the catalytic performance of MoS_(2) in the hydrogen evolution reaction,we investigate the electrocatalytic and photocatalytic performance of monolayer MoS_(2) doped with noble metal(Ag,Au,Cu,Pd,and Pt)usi...To maximize the catalytic performance of MoS_(2) in the hydrogen evolution reaction,we investigate the electrocatalytic and photocatalytic performance of monolayer MoS_(2) doped with noble metal(Ag,Au,Cu,Pd,and Pt)using first principles calculation combined with the climbing image nudged elastic band method.We find the band gap of the monolayer MoS_(2) is reduced significantly by the noble metal doping,which is unfavorable to improving its photocatalytic performance.The optical absorption coefficient shows that the doping does not increase the ability of the monolayer MoS_(2) to absorb visible light.The monolayer MoS_(2) doped with the noble metal is not a potential photocatalyst for the hydrogen evolution reaction because the band edge position of the conduction band minimum is lower than-4.44 eV,the reduction potential of H^(+)/H_(2).Fortunately,the band gap reduction increases the electron transport performance of the monolayer MoS_(2),and the activation energy of water splitting is greatly reduced by the noble metal doping,especially the Pt doping.On the whole,noble metal doping can enhance the electrocatalytic performance of the monolayer MoS_(2).展开更多
Magnets exhibiting the Kitaev interaction,a bond-dependent magnetic interaction in honeycomb lattices,are generally regarded as promising candidates for hosting novel phenomena like quantum spin liquid states.However,...Magnets exhibiting the Kitaev interaction,a bond-dependent magnetic interaction in honeycomb lattices,are generally regarded as promising candidates for hosting novel phenomena like quantum spin liquid states.However,realizing such magnets remains a significant challenge.Recently,some studies have suggested honeycomb magnets A_(3)Ni_(2)XO_(6)(A=Li,Na;X=Bi,Sb)with a high spin S=1 could serve as potential candidates for realizing strong Kitaev interactions.In this work,we systematically investigate their magnetic properties,with a particular emphasis on their Kitaev interactions,using first-principles calculations and Monte Carlo simulations.Our results indicate that all A_(3)Ni_(2)XO_(6)compounds are zigzag antiferromagnets,and their magnetic moments almost tend to be out of plane.We find that their dominant magnetic interactions are the nearest-neighbor ferromagnetic and third-nearest-neighbor antiferromagnetic Heisenberg interactions,while their Kitaev interactions are extremely weak.By analyzing their electronic structures and the mechanism of generating their magnetic interactions,we reveal that either artificially tuning spin-orbit coupling or applying strain cannot produce sufficient spin-orbit entangled states to realize the intriguing Kitaev interactions.Our work advances the understanding of the magnetism in A_(3)Ni_(2)XO_(6)compounds and provides insights for further exploration of Kitaev physics in honeycomb magnets.展开更多
The electronic structures,chemical bonding,elastic and optical properties of the novel hP24 phase WB3 were investigated by using density-functional theory(DFT) within generalized gradient approximation(GGA).The calcul...The electronic structures,chemical bonding,elastic and optical properties of the novel hP24 phase WB3 were investigated by using density-functional theory(DFT) within generalized gradient approximation(GGA).The calculated energy band structures show that the hP24 phase WB3 is metallic material.The density of state(DOS) and the partial density of state(PDOS) calculations show that the DOS near the Fermi level is mainly from the W 5d and B 2p states.Population analysis suggests that the chemical bonding in hP24-WB3 has predominantly covalent characteristics with mixed covalent-ionic characteristics.Basic physical properties,such as lattice constant,bulk modulus,shear modulus and elastic constants Cij were calculated.The elastic modulus E and Poisson ratio υ were also predicted.The results show that hP24-WB3 phase is mechanically stable and behaves in a brittle manner.Detailed analysis of all optical functions reveals that WB3 is a better dielectric material,and reflectivity spectra show that WB3 can be promised as good coating material in the energy regions of 8.5-11.4 eV and 14.5-15.5 eV.展开更多
In nanomaterials, optical anisotropies reveal a fundamental relationship between structural and optical properties, in which directional optical properties can be exploited to enhance the performance of optoelectronic...In nanomaterials, optical anisotropies reveal a fundamental relationship between structural and optical properties, in which directional optical properties can be exploited to enhance the performance of optoelectronic devices. First principles calculation based on density functional theory （DFT） with the generalized gradient approximation （GGA） are carried out to investigate the energy band gap structure on silicon （Si） and germanium （Ge） nanofilms. Simulation results show that the band gaps in Si （100） and Ge （111） nanofilms become the direct-gap structure in the thickness range less than 7.64 nm and 7.25 nm respectively, but the band gaps of Si （111） and Ge （110） nanofilms still keep in an indirect-gap structure and are independent on film thickness, and the band gaps of Si （110） and Ge （100） nanofilms could be transferred into the direct-gap structure in nanofilms with smaller thickness. It is amazing that the band gaps of Si（1-x）/ZGexSi（1-x）/2 sandwich structure become the direct-gap structure in a certain area whether （111） or （100） surface. The band structure change of Si and Ge thin films in three orientations is not the same and the physical mechanism is very interesting, where the changes of the band gaps on the Si and Ge nanofilms follow the quantum confinement effects.展开更多
基金supported by the National Natural Science Foundation of China (grants No.41172051 and 41472042)the Specialized Research Fund for the Doctoral Program of Higher Education of China (grant No.20060491504)
文摘Hydrogen incorporation is critical for explaining defect energies, structure parameters and other physical characteristics of minerals and understanding mantle dynamics. This work analyzed the hydrogen complex defects in jadeite by the plane-wave pseudo-potential method based on density functional theory, and optimized the atomic positions and lattice constants in all configurations （different defective systems）. Incorporation mechanisms considered for hydrogen （H） in jadeite include： （1） hydrogen incorporating with the 02 site oxygen and coexisting with M2 vacancy; （2） one H atom combined with an AI atom replacing Si in tetrahedron; （3） 4H atoms directly replacing Si in tetrahedron and （4） 3H atoms replacing Al on the M1 site. The four incorporation mechanisms mentioned above form the corresponding VNa-Hi, Alsi-Hi, Vsi-4Hi and VAr3Hi point defects. The molecular dynamics simulation to the ideal, VNa-Hi, Alsi-Hi, Vsi-4Hi and VAr3Hi point defects under the P-T conditions of 900 K, 2 GPa, the Vsa-Hi and Alsi-Hi point defects under different pressures at T = 900 K, and Alsj-Hj point defects under different temperatures at P = 3 GPa was performed to examine the preferential mode of hydrogen incorporation in jadeite by means of first-principles calculations. The calculations show that the averaged O-H bond-length in the hydrogen point defects system decreased in the order of Alsi-Hi, VNa-HI, Vsl-4Hf and VAI-3Hi. VNa-HI complex defects result in a contraction of the jadeite volume and the presence of Alsi-Hi, Vsi-4H~ and VAI-3Hi defects could increase the superceli volume, which is the most obvious in the VAt-3Hi defects. The energy of formation of Also-HI and VA[-3HI complex defects was much lower than that of other defect systems. The VAI-3Hi defects system has the lowest energy and the shortest O-H bond-length, suggesting that this system is the most favorable. The analytical results of vacancy formation energy, O-H bond- length, and the stability of the hydrogen defects in jadeite have suggested that the preferred hydration incorporation mode in jadeite is VAI-3Hi complex defect.
基金Project supported by the National Natural Science foundation of China (Grant No.60925016)
文摘The global greenhouse effect makes it urgent to deal with the increasing greenhouse gases. In this paper the performance of MgO-decorated carbon nanotubes for CO2 adsorption is investigated through first principles calculations. The results show that the MgO-decorated carbon nanotubes can adsorb CO2 well and are relatively insensitive to O2 and N2 at the same time. The binding energy arrives at 1.18 eV for the single-MgO-decorated carbon nanotube adsorbing one CO2 molecule, while the corresponding values for O2 and N2 are 0.55 eV and 0.06 eV, respectively. In addition, multi-molecule adsorption is also proved to be very satisfactory. These results indicate that MgO-decorated carbon nanotubes have great potential applications in industrial and environmental processes.
基金the National Key Research and Development Program of China(Grant No.2017YFE0129000)the National Natural Science Foundation of China(Grant Nos.51871121,11874223,and 11404172).
文摘Low dimensional materials are suitable candidates applying in next-generation high-performance electronic,optoelectronic,and energy storage devices because of their uniquely physical and chemical properties.In particular,one-dimensional(1D)atomic wires(AWs)exfoliating from 1D van der Waals(vdW)bulks are more promising in next generation nanometer(nm)even sub-nm device applications owing to their width of few-atoms scale and free dandling bonds states.Although several 1D AWs have been experimentally prepared,few 1D AW candidates could be practically applied in devices owing to lack of enough suitable 1D AWs.Herein,367 kinds of 1D AWs have been screened and the corresponding computational database including structures,electronic structures,magnetic states,and stabilities of these 1D AWs has been organized and established.Among these systems,unary and binary 1D AWs with relatively small exfoliation energy are thermodynamically stable and theoretically feasible to be exfoliated.More significantly,rich quantum states emerge,such as 1D semiconductors,1D metals,1D semimetals,and 1D magnetism.This database will offer an ideal platform to further explore exotic quantum states and exploit practical device applications using 1D materials.The database are openly available at http://www.dx.doi.org/10.11922/sciencedb.j00113.00004.
基金the National Natural Science Foundation of China(Grant Nos.11504312,11775102,and 11805088)the National Basic Research Program of China(Grant No.2015CB921103)+2 种基金China Postdoctoral Science Foundation(Grant No.2018M641477)Guangdong Provincial Department of Science and Technology,China(Grant No.2018A0303100013)the Fundamental Research Funds for the Central Universities,China(Lanzhou University,Grant No.lzujbky-2018-19).
文摘Sulfide nanocrystals and their composites have shown great potential in the thermoelectric(TE)field due to their extremely low thermal conductivity.Recently a solid and hollow metastable Au2S nanocrystalline has been successfully synthesized.Herein,we study the TE properties of this bulk Au2S by first-principles calculations and semiclassical Boltzmann transport theory,which provides the basis for its further experimental studies.Our results indicate that the highly twofold degeneracy of the bands appears at theΓpoint in the Brillouin zone,resulting in a high Seebeck coefficient.Besides,Au2S exhibits an ultra-low lattice thermal conductivity(~0.88 W·m^-1·K^-1 at 700 K).At 700 K,the thermoelectric figure of merit of the optimal p-type doping is close to 1.76,which is higher than 0.8 of ZrSb at 700 K and 1.4 of PtTe at 750 K.Our work clearly demonstrates the advantages of Au2S as a TE material and would greatly inspire further experimental studies and verifications.
文摘The structural, anisotropic elastic properties and the ideal compressive and tensile strengths of titanium diboride (TiB_(2)) were investigated using first-principles calculations based on density functional theory. The stress-strain relationships of TiB2 under 〈10i0〉, 〈12i0〉, and 〈0001〉 compressive loads were calculated. Our results showed that the ideal uniaxial compressive strengths are |σ〈02i0〉)| = 142.96 GPa, |σ〈0001〉 ] = 188.75 GPa, and |σ〈10i0〉| = 245.33 GPa, at strains -0.16, -0.32, and -0.24, respectively. The variational trend is just the opposite to that of the ideal tensile strength with σ〈10i0〉 = 44.13 GPa, σ〈0001〉 = 47.03 GPa, and σ〈i2i0〉 = 56.09 GPa, at strains 0.14, 0.28, and 0.22, respectively. Furthermore, it was found that TiB2 is much stronger under compression than in tension. The ratios of the ideal compressive to tensile strengths are 5.56, 2.55, and 4.01 for crystallographic directions (10i0), 〈12i0〉, and 〈0001〉, respectively. The present results are in excellent agreement with the most recent experimental data and should be helpful to the understanding of the compressive property of TiB2.
基金Funded by the Hubei Province Key Research Foundation for Water Resources,China(No.HBSLKY2023035)the National College Students’Innovation and Entrepreneurship Training Program,China(No.202310500012)the Wuhan Talents Outstanding Young Talents Program。
文摘We investigated the adsorption mechanisms including physical and chemical adsorption for heavy metals(Cd,Pb,Zn,Co,Cu)on C-lignin using density functional theory(DFT)simulations.Physical adsorption,involving metal atoms near carbon atoms,is found to be endothermic;meanwhile,chemical adsorption,where hydroxyl groups replace metal ions,is exothermic and spontaneous.Pb exhibits the highest physical adsorption potential,while Cu and Co demonstrate the strongest chemical adsorption due to their highly negative adsorption energies.These findings provide valuable insights into the design of eco-friendly nano lignocellulosic composite films for effective heavy metal removal from contaminated water sources.Key words:C-lignin;adsorption;We investigated the adsorption mechanisms including physical and chemical adsorption for heavy metals(Cd,Pb,Zn,Co,Cu)on C-lignin using density functional theory(DFT)simulations.Physical adsorption,involving metal atoms near carbon atoms,is found to be endothermic;meanwhile,chemical adsorption,where hydroxyl groups replace metal ions,is exothermic and spontaneous.Pb exhibits the highest physical adsorption potential,while Cu and Co demonstrate the strongest chemical adsorption due to their highly negative adsorption energies.These findings provide valuable insights into the design of eco-friendly nano lignocellulosic composite films for effective heavy metal removal from contaminated water sources.
基金supported by the National Key R&D Program of China under Grant No.2025YFB3003603the National Natural Science Foundation of China under Grant Nos.12135002 and 12105209.
文摘By adopting stochastic density functional theory(SDFT)and mixed stochastic-deterministic density functional theory(MDFT)methods,we perform first-principles calculations to predict the shock Hugoniot curves of boron(pressure P=7.9×10^(3)-1.6×10^(6) GPa and temperature T=25-2800 eV),silicon(P=2.6×10^(3)-7.9×10^(5) GPa and T=21.5-1393 eV),and aluminum(P=5.2×10^(3)-9.0×10^(5) GPa and T=25-1393 eV)over wide ranges of pressure and temperature.In particular,we systematically investigate the impact of different cutoff radii in norm-conserving pseudopotentials on the calculated properties at elevated temperatures,such as pressure,ionization energy,and equation of state.By comparing the SDFT and MDFT results with those of other first-principles methods,such as extended first-principles molecular dynamics and path integral Monte Carlo methods,we find that the SDFT and MDFT methods show satisfactory precision,which advances our understanding of first-principles methods when applied to studies of matter at extremely high pressures and temperatures.
基金the Higher Education Commission of Pakistan for partial funding.
文摘In this study the pseudo-potential method is used to investigate the structural, electronic, and thermodynamic proper- ties of ZnOl_xSx semiconductor materials. The results show that the electronic properties are found to be improved when calculated by using LDA ~ U functional as compared with local density approximation （LDA）. At various concentrations the ground-state properties are determined for bulk materials ZnO, ZnS, and their tertiary alloys in cubic zinc-blende phase. From the results, a minor difference is observed between the lattice parameters from Vegard＇s law and other calculated results, which may be due to the large mismatch between lattice parameters of binary compounds ZnO and ZnS. A small deviation in the bulk modulus from linear concentration dependence is also observed for each of these alloys. The ther- modynamic properties, including the phonon contribution to Helmholtz free energy △F, phonon contribution to internal energy △E, and specific iheat at constant-volume Cv, are calculated within quasi-harmonic approximation based on the calculated phonon dispersion relations.
文摘The plane wave pseudo-potential method was used to investigate the structural, electronic, and elastic properties of Cd Se_（1-x）Te_x in the zinc blende phase. It is observed that the electronic properties are improved considerably by using LDA ＋ U as compared to the LDA approach. The calculated lattice constants and bulk moduli are also comparable to the experimental results. The cohesive energies for pure Cd Se and Cd Te binary and their mixed alloys are calculated. The second-order elastic constants are also calculated by the Lagrangian theory of elasticity. The elastic properties show that the studied material has a ductile nature.
基金Project supported by the National Key Laboratory Opening Funding of Advanced Composites in Special Environments in Harbin Institute of Technology,China
文摘The structural, electronic and elastic properties of common intermetallic compounds in FeTiCoNiVCrMnCuAI system high entropy alloy were investigated by the first principles calculation. The calculation results of formation enthalpy and cohesive energy show that FeTi, Fe2Ti, AlCrFe2, Co2Ti, AlMn2V and Mn2Ti phases may form in the formation process of the alloy. Further studies show that FeTi, FezTi, AlCrFe2, Co2Ti and AlMn2V phases with higher shear modulus and elastic modulus would be excellent strengthening phases in high entropy alloy and would improve the hardness of the alloy. In addition, the partial density of states was investigated for revealing the bonding mode, and the analyses on the strength of p-d hybridization also reveal the underlying mechanism for the elastic properties of these compounds.
基金supported by National Natural Science Foundation of China(No.11820101004)the National Key R&D Program of China(2017YFE0300100,2017YFE0301100)。
文摘The mechanical properties,thermodynamic properties and electronic structure of Mo1-xTax(Mo-Ta)alloys(x=0,0.0625,0.125,0.25,0.3125,0.5 and 1)were calculated by using firstprinciples.The electronic structure of Mo-Ta alloys was analysed by the projected density of states(PDOS).The low temperature heat capacity was estimated by Fermi energy and Debye temperature.It is shown that the formation enthalpy will decrease with the increase of Ta content,and the cohesive energy will increase with the increase of the Ta content.On the other hand,the addition of Ta atoms will reduce the strength and improve the ductility of Mo-Ta alloys,the Debye temperature will decrease and the low temperature heat capacity will be improved with the increase of the Ta content.All these results will be useful for the research of new plasma grid(PG)materials,which is mainly used in neutral beam injection(NBI)systems to produce negative hydrogen ions.
基金supported by the National Key R&D Program of China(Grant No.2016YFA0200400)the National Natural Science Foundation of China(Grant No.11504123 and No.51627805)。
文摘An important challenge facing K-ion batteries lies in exploring earth-abundant and safe cathode materials that can provide high capacity with high migration rate of K ions.Here,we propose a simple and efficient method for searching potential K cathode materials with first principles calculations.Our screening is based on combinations of weight capacity,K ion occupation ratio,volume change per K,and valence limit.With this screening method we predicted a series of potential K ions cathodes with favorable electrochemical performance,such as K_(2)VPO_(4)CO_(3)-like structures with 1 D diffusion channels,3 D channel structures K_(2)CoSiO_(4),layered materials KCoO_(2),KCrO_(2),KVF_(4) and K_(5)V_(3)F_(14),and others.These potential cathodes have small volume changes,suitable voltage,and high capacity,with small diffusion barriers.They may be useful in K-ion batteries with high energy density and rate performance.
基金Project supported by the Nuclear Power Technology Innovation Center ProgramNational Defense Science&Technology Industry,China(Grant No.HDLCXZX-2019-ZH-028)。
文摘Recently,metal-graphene nanocomposite system has aroused much interest due to its radiation tolerance behavior.However,the related atomic mechanism for the metal-graphene interface is still unknown.Further,stainless steels with Fe as main matrix are widely used in nuclear systems.Therefore,in this study,the atomic behaviors of point defects and helium(He) atoms at the Fe(110)-graphene interface are investigated systematically by first principles calculations.The results indicate that graphene interacts strongly with the Fe(110) substrate.In comparison with those of the original graphene and bulk Fe,the formation energy values of C vacancies and Fe point defects decrease significantly for Fe(110)-graphene.However,as He atoms have a high migration barrier and large binding energy at the interface,they are trapped at the interface once they enter into it.These theoretical results suggest that the Fe(110)-graphene interface acts as a strong sink that traps defects,suggesting the potential usage of steel-graphene with multiply interface structures for tolerating the radiation damage.
基金supported by the National Natural Science Foundation of China(No.21004009)the Foundation of Jiangxi Educational Committee(No.GJJ14485)
文摘Via the first principles calculations, we predict that Cu doped graphene oxide （GO） is a much better nanocatalyst in terms of activity and feasibility. The high activity of Cu doped graphene oxides may be attributed to the charge transfer between the GO and Cu atom, resulting in an activated Cu atom. In the ER mechanism, the CO molecules directly react with the activated O2, then forming a metastable carbonate-like intermediate state （OOCO）. The reaction may proceed via two reaction paths of OOCO → CO2 ＋ O and CO ＋ OOCO → 2CO2, respectively. The calculated results show that the latter path is relatively more thermodynamically favorable with a modest energy barrier, so it should be more preferred. We expect our theoretical predictions to open a new avenue to fabricate carbon-based catalysts for CO oxidation with lower cost and higher activity.
基金This work was supported by the National Natural Science Foundation of China （No.20903003, No.11074235, and No.11034006）, the National Basic Research Program （No.2011CB921404）, the Chinese Academy of Sciences, the University of Science and Technology of China, and the Shanghai Supercomputer Center.
文摘We present a first-principles study on the geometric, vibrational and electronic properties of a novel Y-based non-scandium mixed-metal nitride clusterfullerene （TiY2N@C80）. Theoretical results indicate that the fundamental electronic properties of TiY2N@C80 are similar to that of TiSc2N@C80, but dramatically different from that of ScaN@C800 and YaN@C80 molecules. We find that the magnetism of TiY2N@C80 is quenched by carrier doping. The rotation energy barrier of the TiY2N cluster in C80 cage was obviously increased by exohedral chemical modification with pyrrolidine monoadduct.
文摘An investigation of electronic property and high pressure phase stability of SmN has been conducted using first principles calculations based on density functional theory. The elec- tronic properties of Stun show a striking feature of a half metal, the majority-spin electrons are metallic and the minority-spin electrons are semiconducting. It was found that Stun undergoes a pressure-induced phase transition from NaCl-type （B1） to CsCl-type structure （B2） at 117 GPa. The elastic constants of Stun satisfy Born conditions at ambient pressure, indicating that B1 phase of SmN is mechanically stable at 0 GPa. The result of phonon spectra shows that B1 structure is dynamically stable at ambient pressure, which agrees with the conclusion derived from the elastic constants.
基金the Joint Funds of the National Natural Science Foundation of China(Grant No.U1967212)the National Science and Technology Major Project of China(Grant No.2019XS06004009)the Fundamental Research Funds for the Central Universities(Grant No.2018ZD10).
文摘To maximize the catalytic performance of MoS_(2) in the hydrogen evolution reaction,we investigate the electrocatalytic and photocatalytic performance of monolayer MoS_(2) doped with noble metal(Ag,Au,Cu,Pd,and Pt)using first principles calculation combined with the climbing image nudged elastic band method.We find the band gap of the monolayer MoS_(2) is reduced significantly by the noble metal doping,which is unfavorable to improving its photocatalytic performance.The optical absorption coefficient shows that the doping does not increase the ability of the monolayer MoS_(2) to absorb visible light.The monolayer MoS_(2) doped with the noble metal is not a potential photocatalyst for the hydrogen evolution reaction because the band edge position of the conduction band minimum is lower than-4.44 eV,the reduction potential of H^(+)/H_(2).Fortunately,the band gap reduction increases the electron transport performance of the monolayer MoS_(2),and the activation energy of water splitting is greatly reduced by the noble metal doping,especially the Pt doping.On the whole,noble metal doping can enhance the electrocatalytic performance of the monolayer MoS_(2).
基金supported by the National Key R&D Program of China(Grant Nos.2024-YFA1408303 and 2022YFA1403301)the National Natural Sciences Foundation of China(Grant Nos.12474247 and 92165204)+1 种基金support from Guangdong Provincial Key Laboratory of Magnetoelectric Physics and Devices(Grant No.2022B1212010008)Research Center for Magnetoelectric Physicsof Guangdong Province(Grant No.2024B0303390001).
文摘Magnets exhibiting the Kitaev interaction,a bond-dependent magnetic interaction in honeycomb lattices,are generally regarded as promising candidates for hosting novel phenomena like quantum spin liquid states.However,realizing such magnets remains a significant challenge.Recently,some studies have suggested honeycomb magnets A_(3)Ni_(2)XO_(6)(A=Li,Na;X=Bi,Sb)with a high spin S=1 could serve as potential candidates for realizing strong Kitaev interactions.In this work,we systematically investigate their magnetic properties,with a particular emphasis on their Kitaev interactions,using first-principles calculations and Monte Carlo simulations.Our results indicate that all A_(3)Ni_(2)XO_(6)compounds are zigzag antiferromagnets,and their magnetic moments almost tend to be out of plane.We find that their dominant magnetic interactions are the nearest-neighbor ferromagnetic and third-nearest-neighbor antiferromagnetic Heisenberg interactions,while their Kitaev interactions are extremely weak.By analyzing their electronic structures and the mechanism of generating their magnetic interactions,we reveal that either artificially tuning spin-orbit coupling or applying strain cannot produce sufficient spin-orbit entangled states to realize the intriguing Kitaev interactions.Our work advances the understanding of the magnetism in A_(3)Ni_(2)XO_(6)compounds and provides insights for further exploration of Kitaev physics in honeycomb magnets.
基金Project(11271121)supported by the National Natural Science Foundation of ChinaProject(11JJ2002)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(11K038)supported by Key Laboratory of Computational and Stochastic Mathematics of Ministry of Education of ChinaProject(2013GK3130)supported by the Scientific and Technological Plan of Hunan Province,China
文摘The electronic structures,chemical bonding,elastic and optical properties of the novel hP24 phase WB3 were investigated by using density-functional theory(DFT) within generalized gradient approximation(GGA).The calculated energy band structures show that the hP24 phase WB3 is metallic material.The density of state(DOS) and the partial density of state(PDOS) calculations show that the DOS near the Fermi level is mainly from the W 5d and B 2p states.Population analysis suggests that the chemical bonding in hP24-WB3 has predominantly covalent characteristics with mixed covalent-ionic characteristics.Basic physical properties,such as lattice constant,bulk modulus,shear modulus and elastic constants Cij were calculated.The elastic modulus E and Poisson ratio υ were also predicted.The results show that hP24-WB3 phase is mechanically stable and behaves in a brittle manner.Detailed analysis of all optical functions reveals that WB3 is a better dielectric material,and reflectivity spectra show that WB3 can be promised as good coating material in the energy regions of 8.5-11.4 eV and 14.5-15.5 eV.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11264007 and 61465003)
文摘In nanomaterials, optical anisotropies reveal a fundamental relationship between structural and optical properties, in which directional optical properties can be exploited to enhance the performance of optoelectronic devices. First principles calculation based on density functional theory （DFT） with the generalized gradient approximation （GGA） are carried out to investigate the energy band gap structure on silicon （Si） and germanium （Ge） nanofilms. Simulation results show that the band gaps in Si （100） and Ge （111） nanofilms become the direct-gap structure in the thickness range less than 7.64 nm and 7.25 nm respectively, but the band gaps of Si （111） and Ge （110） nanofilms still keep in an indirect-gap structure and are independent on film thickness, and the band gaps of Si （110） and Ge （100） nanofilms could be transferred into the direct-gap structure in nanofilms with smaller thickness. It is amazing that the band gaps of Si（1-x）/ZGexSi（1-x）/2 sandwich structure become the direct-gap structure in a certain area whether （111） or （100） surface. The band structure change of Si and Ge thin films in three orientations is not the same and the physical mechanism is very interesting, where the changes of the band gaps on the Si and Ge nanofilms follow the quantum confinement effects.
