Since the Industrial Revolution,humanity’s extensive burning of fossil fuels(coal,oil,and natural gas)has led to a continuous rise in the concentration of greenhouse gases,such as carbon dioxide(CO_(2)),in the atmosp...Since the Industrial Revolution,humanity’s extensive burning of fossil fuels(coal,oil,and natural gas)has led to a continuous rise in the concentration of greenhouse gases,such as carbon dioxide(CO_(2)),in the atmosphere.According to data from the World Meteorological Organization(WMO),the global average CO_(2) concentration in 2023 exceeded 420×10^(−6),reaching the highest level in the past 800000 years.This has led to the increasing frequency of extreme climate events-such as glacier melting,sea-level rise,heatwaves,droughts,floods,and hurricanes-posing a severe threat to ecosystems and human society.展开更多
Based on the porosity method and the improved non uniform QUICK scheme, this paper describes a three dimensional computer simulation to predict the flow characteristics in a tangentially fired boiler. The model is ap...Based on the porosity method and the improved non uniform QUICK scheme, this paper describes a three dimensional computer simulation to predict the flow characteristics in a tangentially fired boiler. The model is applied to a 600?MW boiler modeling under different operating conditions of reverse swirl of secondary air. The numerical results achieve reasonable agreement with experimental data. The calculated results of flow field, the pressure distribution, the relative diameter of tangential circle, angular momentum flux in furnace and the velocity distribution index in horizontal gas pass are analyzed in detail. And then the effects of the reverse swirl of secondary air on flue gas imbalance are discussed. Finally a reasonable operating condition of the reverse swirl of secondary air is presented.展开更多
Since the combustion system of coal-fired boiler in thermal power plant is characterized as time varying, strongly coupled, and nonlinear, it is hard to achieve a satisfactory performance by the conventional proportio...Since the combustion system of coal-fired boiler in thermal power plant is characterized as time varying, strongly coupled, and nonlinear, it is hard to achieve a satisfactory performance by the conventional proportional integral derivative (PID) control scheme. For the characteristics of the main steam pressure in coal-fired power plant boiler, the sliding mode control system with Smith predictive structure is proposed to look for performance and robustness improvement. First, internal model control (IMC) and Smith predictor (SP) is used to deal with the time delay, and sliding mode controller (SMCr) is designed to overcome the model mismatch. Simulation results show the effectiveness of the proposed controller compared with conventional ones.展开更多
The influence of basicity on the metallurgical performances and reduction characteristics of fired super high-grade magnetite pellets under the simulated shaft furnace gas conditions was investigated.The fired pellets...The influence of basicity on the metallurgical performances and reduction characteristics of fired super high-grade magnetite pellets under the simulated shaft furnace gas conditions was investigated.The fired pellets in the basicity range of 0.09(natural basicity)to 1.00 show superior reducibility and low-temperature disintegration performance.However,in the basicity range of 0.20–0.80,the abnormal swelling of the fired pellets occurs.Improving basicity from 0.09 to 0.40 promotes the generation of low melting point slag phases and lower porosity of fired pellets,and accelerates the growth and densification of hematite crystals,impeding the reduction of hematite particles and the formation of metallic iron shell.In addition,the slags that distribute between the hematite particles absorb the reduction stresses by increased distances between the particles during the reduction process,which leads to the large reduction swelling of pellets.展开更多
Focusing on the phenomenon of gypsum rain while wet desulphurization(WFGD) were adopted in coal fired power plant without GGH, the paper studied and put forward the solutions : (1) desulfurization facilities related e...Focusing on the phenomenon of gypsum rain while wet desulphurization(WFGD) were adopted in coal fired power plant without GGH, the paper studied and put forward the solutions : (1) desulfurization facilities related equipment modification;(2) optimal operation of existing desulfurization facilities.展开更多
The paper describes numerical and experimental study on reduction of NOx emissions in a 600 MW tangentially fired boiler furnace under different operating conditions. A simplified NOX formation mechanism model, along ...The paper describes numerical and experimental study on reduction of NOx emissions in a 600 MW tangentially fired boiler furnace under different operating conditions. A simplified NOX formation mechanism model, along with the gas-particle multiphase flow model, is adopted. The prediction yields encouraging results as compared to experimental data.展开更多
Air-gun is an important active seismic source.With the development of the theory about air-gun array,the technique for air-gun array design becomes mature and is widely used in petroleum exploration and geophysics.In ...Air-gun is an important active seismic source.With the development of the theory about air-gun array,the technique for air-gun array design becomes mature and is widely used in petroleum exploration and geophysics.In order to adapt it to different research domains,different combination and fired models are needed.At the present time,there are two fired models of air-gun source,namely,reinforced initial pulse and reinforced first bubble pulse.The fired time,space between single guns,frequency and resolution of the two models are different.This comparison can supply the basis for its extensive application.展开更多
Clay materials from Thicky in Thiès district (Senegal) are very abundant and could be used for the production of clay brick for the construction industry in Senegal and the surrounding countries. The geophysical,...Clay materials from Thicky in Thiès district (Senegal) are very abundant and could be used for the production of clay brick for the construction industry in Senegal and the surrounding countries. The geophysical, geotechnical, and thermal studies carried out did lead to a better comprehension of the potential of the area for clay production. It also allowed determining the physical and chemical characteristics of the clays for their use in order to make fired clay bricks. Different types of fired clay brick were produced with Thicky’s clays. The study of the physical, mechanical and thermal parameters of these raw materials and bricks has given very satisfactory results compared to the standards in use. It is noted a good ceramic behavior, and there is no deterioration observed after firing at 900°C until low residual moisture of about 3% (on a dry basis), a smooth texture with a beautiful appearance, a low loss on ignition, a low shrinkage value of less than 1% (dry), moderate water absorption and also good compressive strength. The study of thermal properties on a brick wall by the asymmetric lime plane method gives satisfactory effusivity and thermal conductivity values which are respectively equal to 746.48 J<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-2</sup><span style="white-space:nowrap;">·</span>s<sup>-1/2</sup> and 0.42 W<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>k<sup>-1</sup> with a thermal resistance of 0.0028 m<sup>2</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>W<sup>-1</sup>.展开更多
Analysis of nature environmental condition and evalwtion of selection and integration ofteclmiques have been carried out in Daxing’an mountains from 1987. The character of soil generaion in this area is influenced by...Analysis of nature environmental condition and evalwtion of selection and integration ofteclmiques have been carried out in Daxing’an mountains from 1987. The character of soil generaion in this area is influenced by the frigid, coniferous forest vegetation, weather, glacier and late soil formation process. Syntliesis teclmiques for high yield plantation include high seedling quality,suitable site preparation and eftbctive protectioll measures for yoimg trees.展开更多
The Shenqiu meteorite was investigated by Mossbauer spectroscopy at room temperature, atomic absorption, X-ray diffraction and scanning electron microscopy. In order to determine fired conditions of the meteorite whic...The Shenqiu meteorite was investigated by Mossbauer spectroscopy at room temperature, atomic absorption, X-ray diffraction and scanning electron microscopy. In order to determine fired conditions of the meteorite which occurred during the meteorite fall, Shenqiu meteorite samples were fired in an oxidizing atmosphere and a reducing atmosphere at temperatures up to 1300℃, respectively. These samples also were fired at 800, 1000 and 1200 ℃ respectively for different time (up to 24 h).展开更多
A part load operation by turning the burner on and off intermittently is effective for a small scale direct fired absorption chiller. The dynamic performance of the system has been investigated. The relationship betwe...A part load operation by turning the burner on and off intermittently is effective for a small scale direct fired absorption chiller. The dynamic performance of the system has been investigated. The relationship between pressure, temperature and concentration of the lithium bromide solution have been analyzed. The result obtained indicates that the pressure of the high pressure generator and the temperature of the exhausted smoke are the most sensitive parameters. It is also found that the transition time from a full load to a part load condition is quite long, and part load relative cooling capacity is almost near the intermittent running time ratio and oil consumption ratio.展开更多
In this work, an Eulerian/Lagrangian approach has been employed to investigate numerically the flow characteristics, heat transfer and combustion in a tangentially fired furnace. The RNG (Re-normalization group) k-ε ...In this work, an Eulerian/Lagrangian approach has been employed to investigate numerically the flow characteristics, heat transfer and combustion in a tangentially fired furnace. The RNG (Re-normalization group) k-ε model and a new method for cell face velocity interpolation based on a non-staggered grid system are employed. To avoid pseudo-diffusion that is significant in modeling tangentially fired furnaces, attempts are made at improving the differential volume scheme. Some new developments on turbulent diffusion of particles are also taken into account. Thus, computational accuracy is improved substantially.展开更多
High cost has been pointed among factors that limit the promotion of geopolymers. To contribute to the reduction of the use of costly industrial sodium silicate in activators for geopolymers, a gel obtained with RHA a...High cost has been pointed among factors that limit the promotion of geopolymers. To contribute to the reduction of the use of costly industrial sodium silicate in activators for geopolymers, a gel obtained with RHA and concentrated sodium hydroxide was used in the present study to develop an alkaline activator with 8 M NaOH and to produce geopolymers with crushed fired clay bricks wastes (FCBW). Characteristics of the gel were compared to that of commercial sodium silicate which was also mixed with 8 M NaOH in the ratio 1:1 to produce geopolymers. Chemical and mineralogical analyses were done on raw materials. Fourier Transformed Infrared Spectroscopy (FTIR) was done on the gel, commercial sodium silicate and products. Biaxial four point flexural strength, bulk density, water absorption and scanning electron microscopy (SEM) tests were also done on products. Results showed that RHA-NaOH alkaline activator has good potential in consolidating FCBW powder through geopolymerization process which gave products that had characteristics not far from that when the commercial sodium silicate was used. The gel obtained by mixing RHA and NaOH can contribute to the reduction of the use of costly commercial sodium silicate in the production process of geopolymers. However, appropriate filtration process is needed for the RHA-NaOH gel to reduce its impurities as undissolved entities, which will consequently contribute to improve the flexural strength, the density and the microstructure of its products which were low compared to when commercial sodium silicate was used.展开更多
This study deals with the physico-chemical, mineralogical and geotechnical characterization of alluvial clays from Batchenga in Cameroon with a view to their use as building materials for housing. The alluvial clay (A...This study deals with the physico-chemical, mineralogical and geotechnical characterization of alluvial clays from Batchenga in Cameroon with a view to their use as building materials for housing. The alluvial clay (Arg.All) was collected in the locality of Batchenga at the village Natchigal (4˚20'40''N and 11˚37'40''E at 378 m altitude) and was fired between 900˚C and 1100˚C. Characterization was performed by XRD, XRF, DTA/DTG, and firing tests. XRD, XRF, DTA/DTG infrared analysis methods were performed on these clays. The linear shrinkage, mechanical strengths, water absorption, porosity and density were measured on the fired products. The results obtained show that the major oxides are for the Arg.Lat SiO<sub>2</sub> (72.13%), Al<sub>2</sub>O<sub>3 </sub>(14.1%), Fe<sub>2</sub>O<sub>3</sub> (4.45%) and for the Arg.All: SiO<sub>2</sub> (48.91%), Al<sub>2</sub>O<sub>3</sub> (23.79%), Fe<sub>2</sub>O<sub>3</sub> (9.54%). The fired products based on alluvial clay, present the flexural strength of 4.45 MPa at 900˚C and 6.80 MPa at 1100˚C. As for those based on lateritic clay, the flexural strength is 0.53 and 0.76 MPa respectively at 900 and 1100˚C. The porosity is 33.69% at 900˚C and 22.93% at 1100˚C for the alluvial clay and 39.55% at 900˚C and 36.01% for the lateritic clay at 1100˚C. Water absorption is 18% to 11.16% for alluvial clay and 22.43% to 21.16% for lateritic clay at 900˚C and 1100˚C respectively. These results suggest that alluvial clay and its firing products have better physico-chemical, geotechnical and mechanical characteristics regardless of the firing temperature of the manufactured products. The addition of degreaser is recommended to improve the mechanical performance of lateritic clay.展开更多
According to the new report released by the International Energy Agency,as the pandemic starts to mitigate and the global economy gradually recovers,demand for power has been rising.In 2021,the world’s coal-fired pow...According to the new report released by the International Energy Agency,as the pandemic starts to mitigate and the global economy gradually recovers,demand for power has been rising.In 2021,the world’s coal-fired power generation increased by 9%over the previous year,while in 2020 power generation fell by 4%.The report shows that the rising demands for power,coupled with inadequate low-carbon power generation have made many developed economies more dependent on fossil fuel power.The rise of natural gas prices to a historical high has also stimulated demand for coal.展开更多
Shiheng Coal-fired Power Plant,situated at the foot of thefamous Taishan Mountain and about 100 km southwestof Jinan,the capital of Shandong Province,is a major power plant inShandong Provincial Grid,with a total inst...Shiheng Coal-fired Power Plant,situated at the foot of thefamous Taishan Mountain and about 100 km southwestof Jinan,the capital of Shandong Province,is a major power plant inShandong Provincial Grid,with a total installed capacity of 735 MW,of which:Plant A 4 medium size generating units with a total capacityof 135 MW;Plant B two subcritical pressure 300 MW generating units.展开更多
BackgroundThe power industry has long been plagued with complicationsand outages related to corrosion of plant components.Prior to the mid-sixties,corrosion of boiler water-wall tubeswas one of the prominent problems ...BackgroundThe power industry has long been plagued with complicationsand outages related to corrosion of plant components.Prior to the mid-sixties,corrosion of boiler water-wall tubeswas one of the prominent problems in power plants.Water-walltubes corrosion proceeding under iron oxide deposit caused causticgouging or acidic embrittlement of tube metal.Many boiler tubesfailed by sudden rupture.Field and laboratory studies showed that,carbonate alkalinity and neutral salt in boiler make up water展开更多
On Dec. 22, Environment Secretary Margaret Beckett welcomed a UK/China landmark agreement on the development of clean coal technology with carbon dioxide capture and storage, which aims to reduce significantly the cli...On Dec. 22, Environment Secretary Margaret Beckett welcomed a UK/China landmark agreement on the development of clean coal technology with carbon dioxide capture and storage, which aims to reduce significantly the climate change impact from coal-fired electricity generation.展开更多
Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature ...Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature system of USC unit.Closed-loop SMI is applied to building step response model of the unit directly.The parameters selection method is proposed to deal with the parameter sensitivity and improve the reliability of the model.Finally,the model is used in model identification of real USC unit.展开更多
Nowadays, entrepreneurship inspires those who want to carve out their own destiny and dream of changing the world. But they require a lot of courage and perseverance - especially for those who seek to do business in a...Nowadays, entrepreneurship inspires those who want to carve out their own destiny and dream of changing the world. But they require a lot of courage and perseverance - especially for those who seek to do business in a foreign country, such as African entrepreneurs in China.展开更多
文摘Since the Industrial Revolution,humanity’s extensive burning of fossil fuels(coal,oil,and natural gas)has led to a continuous rise in the concentration of greenhouse gases,such as carbon dioxide(CO_(2)),in the atmosphere.According to data from the World Meteorological Organization(WMO),the global average CO_(2) concentration in 2023 exceeded 420×10^(−6),reaching the highest level in the past 800000 years.This has led to the increasing frequency of extreme climate events-such as glacier melting,sea-level rise,heatwaves,droughts,floods,and hurricanes-posing a severe threat to ecosystems and human society.
文摘Based on the porosity method and the improved non uniform QUICK scheme, this paper describes a three dimensional computer simulation to predict the flow characteristics in a tangentially fired boiler. The model is applied to a 600?MW boiler modeling under different operating conditions of reverse swirl of secondary air. The numerical results achieve reasonable agreement with experimental data. The calculated results of flow field, the pressure distribution, the relative diameter of tangential circle, angular momentum flux in furnace and the velocity distribution index in horizontal gas pass are analyzed in detail. And then the effects of the reverse swirl of secondary air on flue gas imbalance are discussed. Finally a reasonable operating condition of the reverse swirl of secondary air is presented.
基金Supported by the National Natural Science Foundation of China (61174059, 60934007, 61233004)the National Basic Research Program of China (2013CB035406)Shanghai Rising-Star Tracking Program (11QH1401300)
文摘Since the combustion system of coal-fired boiler in thermal power plant is characterized as time varying, strongly coupled, and nonlinear, it is hard to achieve a satisfactory performance by the conventional proportional integral derivative (PID) control scheme. For the characteristics of the main steam pressure in coal-fired power plant boiler, the sliding mode control system with Smith predictive structure is proposed to look for performance and robustness improvement. First, internal model control (IMC) and Smith predictor (SP) is used to deal with the time delay, and sliding mode controller (SMCr) is designed to overcome the model mismatch. Simulation results show the effectiveness of the proposed controller compared with conventional ones.
基金The authors want to express their gratitude for the financial support from the National Natural Science Foundation of China(No.52004075)Science and Technology Planning Projects of Guizhou Province(No.ZK[2021]262)+1 种基金Program Foundation for Talents of Guizhou University(No.(2020)15)the Hunan Provincial Co-innovation Center for Clean and Efficient Utilization of Strategic Metal Mineral Resources.
文摘The influence of basicity on the metallurgical performances and reduction characteristics of fired super high-grade magnetite pellets under the simulated shaft furnace gas conditions was investigated.The fired pellets in the basicity range of 0.09(natural basicity)to 1.00 show superior reducibility and low-temperature disintegration performance.However,in the basicity range of 0.20–0.80,the abnormal swelling of the fired pellets occurs.Improving basicity from 0.09 to 0.40 promotes the generation of low melting point slag phases and lower porosity of fired pellets,and accelerates the growth and densification of hematite crystals,impeding the reduction of hematite particles and the formation of metallic iron shell.In addition,the slags that distribute between the hematite particles absorb the reduction stresses by increased distances between the particles during the reduction process,which leads to the large reduction swelling of pellets.
文摘Focusing on the phenomenon of gypsum rain while wet desulphurization(WFGD) were adopted in coal fired power plant without GGH, the paper studied and put forward the solutions : (1) desulfurization facilities related equipment modification;(2) optimal operation of existing desulfurization facilities.
基金Supported by the National Science Foundation of Zhejiang Province.
文摘The paper describes numerical and experimental study on reduction of NOx emissions in a 600 MW tangentially fired boiler furnace under different operating conditions. A simplified NOX formation mechanism model, along with the gas-particle multiphase flow model, is adopted. The prediction yields encouraging results as compared to experimental data.
基金The research was funded under the project of NSFC(Grant number:NSFC40234038)Joint Earthquake Science Foundation,China(Grant No.105108)
文摘Air-gun is an important active seismic source.With the development of the theory about air-gun array,the technique for air-gun array design becomes mature and is widely used in petroleum exploration and geophysics.In order to adapt it to different research domains,different combination and fired models are needed.At the present time,there are two fired models of air-gun source,namely,reinforced initial pulse and reinforced first bubble pulse.The fired time,space between single guns,frequency and resolution of the two models are different.This comparison can supply the basis for its extensive application.
文摘Clay materials from Thicky in Thiès district (Senegal) are very abundant and could be used for the production of clay brick for the construction industry in Senegal and the surrounding countries. The geophysical, geotechnical, and thermal studies carried out did lead to a better comprehension of the potential of the area for clay production. It also allowed determining the physical and chemical characteristics of the clays for their use in order to make fired clay bricks. Different types of fired clay brick were produced with Thicky’s clays. The study of the physical, mechanical and thermal parameters of these raw materials and bricks has given very satisfactory results compared to the standards in use. It is noted a good ceramic behavior, and there is no deterioration observed after firing at 900°C until low residual moisture of about 3% (on a dry basis), a smooth texture with a beautiful appearance, a low loss on ignition, a low shrinkage value of less than 1% (dry), moderate water absorption and also good compressive strength. The study of thermal properties on a brick wall by the asymmetric lime plane method gives satisfactory effusivity and thermal conductivity values which are respectively equal to 746.48 J<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-2</sup><span style="white-space:nowrap;">·</span>s<sup>-1/2</sup> and 0.42 W<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>k<sup>-1</sup> with a thermal resistance of 0.0028 m<sup>2</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>W<sup>-1</sup>.
文摘Analysis of nature environmental condition and evalwtion of selection and integration ofteclmiques have been carried out in Daxing’an mountains from 1987. The character of soil generaion in this area is influenced by the frigid, coniferous forest vegetation, weather, glacier and late soil formation process. Syntliesis teclmiques for high yield plantation include high seedling quality,suitable site preparation and eftbctive protectioll measures for yoimg trees.
基金The Project Supported by National Natural Science Foundation of China
文摘The Shenqiu meteorite was investigated by Mossbauer spectroscopy at room temperature, atomic absorption, X-ray diffraction and scanning electron microscopy. In order to determine fired conditions of the meteorite which occurred during the meteorite fall, Shenqiu meteorite samples were fired in an oxidizing atmosphere and a reducing atmosphere at temperatures up to 1300℃, respectively. These samples also were fired at 800, 1000 and 1200 ℃ respectively for different time (up to 24 h).
文摘A part load operation by turning the burner on and off intermittently is effective for a small scale direct fired absorption chiller. The dynamic performance of the system has been investigated. The relationship between pressure, temperature and concentration of the lithium bromide solution have been analyzed. The result obtained indicates that the pressure of the high pressure generator and the temperature of the exhausted smoke are the most sensitive parameters. It is also found that the transition time from a full load to a part load condition is quite long, and part load relative cooling capacity is almost near the intermittent running time ratio and oil consumption ratio.
基金Supported by the National Science Foundation of Zhejiang Province
文摘In this work, an Eulerian/Lagrangian approach has been employed to investigate numerically the flow characteristics, heat transfer and combustion in a tangentially fired furnace. The RNG (Re-normalization group) k-ε model and a new method for cell face velocity interpolation based on a non-staggered grid system are employed. To avoid pseudo-diffusion that is significant in modeling tangentially fired furnaces, attempts are made at improving the differential volume scheme. Some new developments on turbulent diffusion of particles are also taken into account. Thus, computational accuracy is improved substantially.
文摘High cost has been pointed among factors that limit the promotion of geopolymers. To contribute to the reduction of the use of costly industrial sodium silicate in activators for geopolymers, a gel obtained with RHA and concentrated sodium hydroxide was used in the present study to develop an alkaline activator with 8 M NaOH and to produce geopolymers with crushed fired clay bricks wastes (FCBW). Characteristics of the gel were compared to that of commercial sodium silicate which was also mixed with 8 M NaOH in the ratio 1:1 to produce geopolymers. Chemical and mineralogical analyses were done on raw materials. Fourier Transformed Infrared Spectroscopy (FTIR) was done on the gel, commercial sodium silicate and products. Biaxial four point flexural strength, bulk density, water absorption and scanning electron microscopy (SEM) tests were also done on products. Results showed that RHA-NaOH alkaline activator has good potential in consolidating FCBW powder through geopolymerization process which gave products that had characteristics not far from that when the commercial sodium silicate was used. The gel obtained by mixing RHA and NaOH can contribute to the reduction of the use of costly commercial sodium silicate in the production process of geopolymers. However, appropriate filtration process is needed for the RHA-NaOH gel to reduce its impurities as undissolved entities, which will consequently contribute to improve the flexural strength, the density and the microstructure of its products which were low compared to when commercial sodium silicate was used.
文摘This study deals with the physico-chemical, mineralogical and geotechnical characterization of alluvial clays from Batchenga in Cameroon with a view to their use as building materials for housing. The alluvial clay (Arg.All) was collected in the locality of Batchenga at the village Natchigal (4˚20'40''N and 11˚37'40''E at 378 m altitude) and was fired between 900˚C and 1100˚C. Characterization was performed by XRD, XRF, DTA/DTG, and firing tests. XRD, XRF, DTA/DTG infrared analysis methods were performed on these clays. The linear shrinkage, mechanical strengths, water absorption, porosity and density were measured on the fired products. The results obtained show that the major oxides are for the Arg.Lat SiO<sub>2</sub> (72.13%), Al<sub>2</sub>O<sub>3 </sub>(14.1%), Fe<sub>2</sub>O<sub>3</sub> (4.45%) and for the Arg.All: SiO<sub>2</sub> (48.91%), Al<sub>2</sub>O<sub>3</sub> (23.79%), Fe<sub>2</sub>O<sub>3</sub> (9.54%). The fired products based on alluvial clay, present the flexural strength of 4.45 MPa at 900˚C and 6.80 MPa at 1100˚C. As for those based on lateritic clay, the flexural strength is 0.53 and 0.76 MPa respectively at 900 and 1100˚C. The porosity is 33.69% at 900˚C and 22.93% at 1100˚C for the alluvial clay and 39.55% at 900˚C and 36.01% for the lateritic clay at 1100˚C. Water absorption is 18% to 11.16% for alluvial clay and 22.43% to 21.16% for lateritic clay at 900˚C and 1100˚C respectively. These results suggest that alluvial clay and its firing products have better physico-chemical, geotechnical and mechanical characteristics regardless of the firing temperature of the manufactured products. The addition of degreaser is recommended to improve the mechanical performance of lateritic clay.
文摘According to the new report released by the International Energy Agency,as the pandemic starts to mitigate and the global economy gradually recovers,demand for power has been rising.In 2021,the world’s coal-fired power generation increased by 9%over the previous year,while in 2020 power generation fell by 4%.The report shows that the rising demands for power,coupled with inadequate low-carbon power generation have made many developed economies more dependent on fossil fuel power.The rise of natural gas prices to a historical high has also stimulated demand for coal.
文摘Shiheng Coal-fired Power Plant,situated at the foot of thefamous Taishan Mountain and about 100 km southwestof Jinan,the capital of Shandong Province,is a major power plant inShandong Provincial Grid,with a total installed capacity of 735 MW,of which:Plant A 4 medium size generating units with a total capacityof 135 MW;Plant B two subcritical pressure 300 MW generating units.
文摘BackgroundThe power industry has long been plagued with complicationsand outages related to corrosion of plant components.Prior to the mid-sixties,corrosion of boiler water-wall tubeswas one of the prominent problems in power plants.Water-walltubes corrosion proceeding under iron oxide deposit caused causticgouging or acidic embrittlement of tube metal.Many boiler tubesfailed by sudden rupture.Field and laboratory studies showed that,carbonate alkalinity and neutral salt in boiler make up water
文摘On Dec. 22, Environment Secretary Margaret Beckett welcomed a UK/China landmark agreement on the development of clean coal technology with carbon dioxide capture and storage, which aims to reduce significantly the climate change impact from coal-fired electricity generation.
基金National Natural Science Foundation of China(No.60974119)
文摘Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature system of USC unit.Closed-loop SMI is applied to building step response model of the unit directly.The parameters selection method is proposed to deal with the parameter sensitivity and improve the reliability of the model.Finally,the model is used in model identification of real USC unit.
文摘Nowadays, entrepreneurship inspires those who want to carve out their own destiny and dream of changing the world. But they require a lot of courage and perseverance - especially for those who seek to do business in a foreign country, such as African entrepreneurs in China.
