The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of c...The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of curl interface underground or “v” figure complex model, it is difficult to realize. So it is important to forward the complex geoelectricity model. This paper takes two Maxwell’s vorticity equations as departure point, makes use of the principles of Yee’s space grid model theory and the basic principle finite difference time domain method, and deduces a GPR forward system of equation of two dimensional spaces. The Mur super absorbed boundary condition is adopted to solve the super strong reflection on the interceptive boundary when there is the forward simulation. And a self-made program is used to process forward simulation to two typical geoelectricity model.展开更多
The higher excited states for two dimensional finite rectangular well potential are calculated numerically,by solving the Schrödinger equation using the finite difference time domain method.Although,this method i...The higher excited states for two dimensional finite rectangular well potential are calculated numerically,by solving the Schrödinger equation using the finite difference time domain method.Although,this method is suitable to calculate the ground state of the quantum systems,it has been improved to calculate the higher excited states directly.The improvement is based on modifying the iterative process involved in this method to include two procedures.The first is known as cooling steps and the second is known as a heating step.By determining the required length of the cooling iteration steps using suitable excitation energy estimate,and repeating these two procedures using suitable initial guess function for sufficient times.This modified iteration will lead automatically to the desired excited state.In the two dimensional finite rectangular well potential problem both of the suitable excitation energy and the suitable initial guess wave function are calculated analytically using the separation of variables technique.展开更多
The rational design of the sample cell may improve the sensitivity of surface-enhanced Raman scattering （SERS） detection in a high degree. Finite difference time domain （FDTD） simulations of the configuration of A...The rational design of the sample cell may improve the sensitivity of surface-enhanced Raman scattering （SERS） detection in a high degree. Finite difference time domain （FDTD） simulations of the configuration of Ag film-Ag particles illuminated by plane wave and evanescent wave are performed to provide physical insight for design of the sample cell. Numerical solutions indicate that the sample cell can provide more ＂hot spots＂ and the massive field intensity enhancement occurs in these ＂hot spots＂. More information on the nanometer character of the sample can be got because of gradient-field Raman （GFR） of evanescent wave. OCIS codes： 290.5860, 240.0310, 240.6680, 999.9999 （surface-enhanced Raman scattering）.展开更多
The transmission coefficients of electromagnetic （EM） waves due to a superconductor-dielectric superlattice are numerically calculated. Shift operator finite difference time domain （SO-FDTD） method is used in the ...The transmission coefficients of electromagnetic （EM） waves due to a superconductor-dielectric superlattice are numerically calculated. Shift operator finite difference time domain （SO-FDTD） method is used in the analysis. By using the SO-FDTD method, the transmission spectrum is obtained and its characteristics are investigated for different thicknesses of superconductor layers and dielectric layers, from which a stop band starting from zero frequency can be apparently observed. The relation between this low-frequency stop band and relative temperature, and also the London penetration depth at a superconductor temperature of zero degree are discussed, separately. The low-frequency stop band properties of superconductor-dielectric superlattice thus are well disclosed.展开更多
To improve the resolution of crosshole electromagnetic tomography, high precision of forward modeling is necessary. A pseudo-spectral time domain （PSTD） forward modeling was used to simulate electromagnetic wave pro...To improve the resolution of crosshole electromagnetic tomography, high precision of forward modeling is necessary. A pseudo-spectral time domain （PSTD） forward modeling was used to simulate electromagnetic wave propagation between two boreholes. The PSTD algorithm is based on the finite difference time domain （FDTD） method and uses the fast Fourier transform （FFT） algorithm for spatial derivatives in Maxwell＇s equations. Besides having the strongpoint of the FDTD method, the calculation precision of the PSTD algorithm is higher than that of the FDTD method under the same calculation condition. The forward modeling using the PSTD method will play an important role in enhancing the resolution of crosshole electromagnetic tomography.展开更多
The electrical performance of radomes on high-speed aircraft can be influenced by the thermal and mechanical loads produced during high-speed flight,which can affect the detection dis-tance and accuracy of the guidanc...The electrical performance of radomes on high-speed aircraft can be influenced by the thermal and mechanical loads produced during high-speed flight,which can affect the detection dis-tance and accuracy of the guidance system.This paper presents a new method that uses the Finite Difference Time Domain(FDTD)method to calculate the electrical performance of radomes under Thermo-Mechanical-Electrical(TME)coupling.This method can accurately characterize the effects of material dielectric temperature drift and structural deformation on the electrical performance of the radome under flight conditions,enabling high-precision full-wave calculations of the broadband electrical performance of the radome.The method initiates by utilizing a Finite Element Grid Model(FE-GM)of the radome to sequentially acquire the radome's response temperature field and structural deformation field through thermal and mechanical simulations.Subsequently,spatial mapping techniques are developed to accurately incorporate the dielectric temperature drift and structural deformation of the radome into its Yee grid Electromagnetic(EM)simulation model.A verification case was designed to test the proposed method,and the results confirmed its high computational accuracy.Additionally,the effectiveness and necessity of the method were further demonstrated by analyzing the electrical performance of a fused silica ceramic radome used on a high-speed aircraft.展开更多
Security monitoring system of coal mines is indispensable to ensure the safe and efficient production of colliery. Due to the special and narrow underground field of the coal mine, the electromagnetic interference can...Security monitoring system of coal mines is indispensable to ensure the safe and efficient production of colliery. Due to the special and narrow underground field of the coal mine, the electromagnetic interference can cause a series of misstatements and false positives on the monitoring system, which will severely hamper the safe production of coal industry. In this paper, first, the frequency characteristics of the interference source on the power line are extracted when equipment runs normally. Then the finite difference time domain method is introduced to analyze the effects of the electromagnetic interference parameters on the security monitoring signal line. And the interference voltage of the two terminal sides on the single line is taken as evaluating indexes. Finally, the electromagnetic interference parameters are optimized by orthogonal experimental design based on the MATLAB simulation on the normal operation of equipment.展开更多
The characteristics of the periodic band gaps of the one dimension magnetized plasma photonic crystals are studied with the piecewise linear current density recursive convolution (PLCDRC) finite-differential time-doma...The characteristics of the periodic band gaps of the one dimension magnetized plasma photonic crystals are studied with the piecewise linear current density recursive convolution (PLCDRC) finite-differential time-domain (FDTD) method. In frequency-domain, the transmission coefficients of electromagnetic Gaussian pulses are computed, and the effects of the periodic structure constant, plasma layer thickness and parameters of plasma on the properties of periodic band gaps of magnetized photonic crystals are a...展开更多
We design a channel-drop filter(CDF)with a linear gradient microcavity in a two-dimensional(2D)photonic crystal(PC).The model of three-port CDF with reflector is used to achieve high quality factor(Q-factor)and 100%ch...We design a channel-drop filter(CDF)with a linear gradient microcavity in a two-dimensional(2D)photonic crystal(PC).The model of three-port CDF with reflector is used to achieve high quality factor(Q-factor)and 100%channel-drop efficiency.The research indicates that adjusting the distance between reference plane and reflector can simultaneously influence the Q-factor due to coupling to a bus waveguide and the phase retardation occurring in the round trip between a microcavity and a reflector.The calculation results of 2D finite-difference time-domain(FDTD)method show that the designed filter can achieve the drop efficiency of 96.7%and ultra-high Q-factor with an ultra-small modal volume.展开更多
This paper proposes an optical device which can continuously change the polarization state of terahertz （THz） waves. The device consists of metal gate, anU-refleetlon coatings, liquid crystal and mirror. By changing...This paper proposes an optical device which can continuously change the polarization state of terahertz （THz） waves. The device consists of metal gate, anU-refleetlon coatings, liquid crystal and mirror. By changing the refractive index of liquid crystal in the interface between the metal gate and the mirror, the phase difference between two beams with orthogonal polarization is varied and a continuous phase sliift is achieved. The phase shift of the device is calculated by using the finite difference time domain （FDTD） method, and the transmittance and reflectance are calculated by using the rigorous coupled wave analysis （RCWA） method. The results reveal that the structure can realize continuously tunable phase shift for THz wave at 1 THz.展开更多
In this paper, a model of photonic crystal temperature sensor based on crystal microcavity in a straight photonic crystal waveguide is proposed. The transmission characteristics of light in the sensor under different ...In this paper, a model of photonic crystal temperature sensor based on crystal microcavity in a straight photonic crystal waveguide is proposed. The transmission characteristics of light in the sensor under different temperatures are simulated by using finite-difference time-domain (FDTD) method. The thermal expansion and thermal-optic effects of silicon are taken into account. The results show that the resonant wavelength of microcavity increases linearly as the temperature rising. The wavelength shift along with temperature is 6.6 pm /℃.展开更多
We design a compact terahertz(THz) polarization beam splitter. Both plane wave expansion method and finite-difference time-domain method are used to calculate and analyze the characteristics of the proposed device. Th...We design a compact terahertz(THz) polarization beam splitter. Both plane wave expansion method and finite-difference time-domain method are used to calculate and analyze the characteristics of the proposed device. The designed polarization beam splitter can split TE-polarized and TM-polarized THz waves into different propagation directions. The simulation results show that the extinction ratios are larger than 18.36 dB for TE polarization and 13.35 dB for TM polarization in the frequency range from 1.86 THz to 1.91 THz, respectively. The designed polarization beam splitter has the advantages of small size and compact structure with a total size of 4.825 mm×0.400 mm.展开更多
The factors affecting one dimensional （1D） and two dimensional （2D） photonic crystals （PhCs） are systemically analyzed in this paper by numerical simulation. Transfer matrix method （TMM） is employed for 1D PCs...The factors affecting one dimensional （1D） and two dimensional （2D） photonic crystals （PhCs） are systemically analyzed in this paper by numerical simulation. Transfer matrix method （TMM） is employed for 1D PCs, both finite difference time domain method （FDTD） and plane wave expansion method （PWE） are employed for 2D PCs. The result shows that the photonic bandgaps （PBG） are directly affected by crystal type, crystal lattice constant, modulation of refractive index and periodicity, and it is should be useful for design of different type photonic crystals with the required PBG and functional devices. Finally, as an example, a near-IR 1D PCs narrow filter was designed.展开更多
Mid-infrared transmittance of submicron silver slit arrays was numerically studied with the finite difference time domain method. The slit width varies from 50 nm to 300 nm and a square feature may attach at either or...Mid-infrared transmittance of submicron silver slit arrays was numerically studied with the finite difference time domain method. The slit width varies from 50 nm to 300 nm and a square feature may attach at either or both slit sides. Although the side length of features is one or two orders of magnitude shorter than the wavelength, the attached nanoscale features can modify the transmittance significantly. The transmittance was also further investigated in detail by looking into the electromagnetic fields and Poynting vectors of selected slit geometries. The investigation results show that such change can be attributed to the cavity resonance effect inside the slit arrays. The work is of great importance to the wavelength-selective devices design in optical devices and thermal application fields.展开更多
A wavelength splitter with ultra-compact and simple structure is proposed and analyzed by using both plane wave expansion （PWE） method and finite difference time domain （FDTD） method. The device is based on direct...A wavelength splitter with ultra-compact and simple structure is proposed and analyzed by using both plane wave expansion （PWE） method and finite difference time domain （FDTD） method. The device is based on directional coupling between two parallel lithium niobate （LiNbO3, LN） nanowire optical waveguides. The wavelength splitter with a coupling region length of 5 um can separate 1.3 um and 1.55 um wavelengths for corresponding outputs with transmittance higher than 97%.展开更多
The radiative properties(absorptance, reflectance, and transmittance) of deep slits with five nanoscale slit profile variations at the transverse magnetic wave incidence were numerically investigated by employing the ...The radiative properties(absorptance, reflectance, and transmittance) of deep slits with five nanoscale slit profile variations at the transverse magnetic wave incidence were numerically investigated by employing the finite difference time domain method. For slits with attached features, their radiative properties can be much different due to the modified cavity geometry and dangled structures, even at wavelengths between 3 and 15 μm. The shifts of cavity resonance excitation result in higher transmittance through narrower slits at specific wavelengths and resonance modes are confirmed with the electromagnetic fields. Opposite roles possibly played by features in increasing or decreasing absorptance are determined by the feature position and demonstrated by Poynting vectors. Correlations among all properties of a representative slit array and the slit density are also comprehensively studied. When multiple slit types coexist in an array(complex slits), a wide-band transmittance or absorptance enhancement is feasible by merging spectral peaks contributed from each type of slits distinctively. Discrepancy among infrared properties of four selected slit combinations is explained while effects of slit density are also discussed.展开更多
We demonstrate a novel SOI-based photonic crystal（PC） double-heterostructure slot waveguide microcavity constructed by cascading three PC slot waveguides with different slot widths,and simulate the luminescence enha...We demonstrate a novel SOI-based photonic crystal（PC） double-heterostructure slot waveguide microcavity constructed by cascading three PC slot waveguides with different slot widths,and simulate the luminescence enhancement of sol-gel Er-doped SiO2 filled in the microcavity by finite-difference time-domain（FDTD） method.The calculated results indicate that a unique sharp resonant peak dominates in the spectrum at the expected telecommunication wavelength of 1.5509 mm,with very high normalized peak intensity of ~108.The electromagnetic field of the resonant mode exhibits the strongest in the microcavity,and decays rapidly to zero along both sides,which means that the resonant mode field is well confined in the microcavity.The simulation results fully verify the enhancement of luminescence by PC double-heterostructure slot waveguide microcavity theoretically,which is a promising way to realize the high-efficiency luminescence of Si-based materials.展开更多
The radiative properties of three different materials surfaces with one-dimensional microscale random roughness were obtained with the finite difference time domain method(FDTD) and near-to-far-field transformation.Th...The radiative properties of three different materials surfaces with one-dimensional microscale random roughness were obtained with the finite difference time domain method(FDTD) and near-to-far-field transformation.The surface height conforms to the Gaussian probability density function distribution.Various computational modeling issues that affect the accuracy of the predicted properties were discussed.The results show that,for perfect electric conductor(PEC) surfaces,as the surface roughness increases,the magnitude of the spike reduces and eventually the spike disappears,and also as the ratio of root mean square roughness to the surface correlation distance increases,the retroreflection becomes evident.The predicted values of FDTD solutions are in good agreement with the ray tracing and integral equation solutions.The overall trend of bidirectional reflection distribution function(BRDF) of PEC surfaces and silicon surfaces is the same,but the silicon's is much less than the former's.The BRDF difference from two polarization modes for the gold surfaces is little for smaller wavelength,but it is much larger for the longer wavelength and the FDTD simulation results agree well with the measured data.In terms of PEC surfaces,as the incident angle increases,the reflectivity becomes more specular.展开更多
The light propagation characteristics through the annular coupled-resonator cavity waveguides are systematically analyzed by the finite-difference time-domain (FDTD) method. It is found that this kind of waveguide has...The light propagation characteristics through the annular coupled-resonator cavity waveguides are systematically analyzed by the finite-difference time-domain (FDTD) method. It is found that this kind of waveguide has more minbands owing to the increasing of the cavity’s size, compared with the traditional line-typed coupled-resonator waveguide. The group velocity of light propagation can be reduced for a further degree when the adjacent annular cavities are interlaced in the perpendicular direction, and a group velocity about 0.00067c (c is the light speed in vacuum) can be obtained.展开更多
A unidirectional surface plasmon polaritons(SPPs) generator with greatly enhanced generation efficiency is proposed. The SPPs generator consists of an asymmetric single nanoslit coated with a polyviny alcohol(PVA) fil...A unidirectional surface plasmon polaritons(SPPs) generator with greatly enhanced generation efficiency is proposed. The SPPs generator consists of an asymmetric single nanoslit coated with a polyviny alcohol(PVA) film and a silver rectangle block. The generation efficiency of this SPPs generator is investigated using the finite difference time domain method. Due to the presence of the silver rectangle block, the SPPs generation efficiency of the asymmetric single nanoslit with PVA film can be greatly enhanced and the corresponding wavelength with the maximum enhancement factor can be tuned flexibly. The influence of the structural parameters on the generation efficiency is also investigated for the enhanced unidirectional SPPs generator.展开更多
文摘The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of curl interface underground or “v” figure complex model, it is difficult to realize. So it is important to forward the complex geoelectricity model. This paper takes two Maxwell’s vorticity equations as departure point, makes use of the principles of Yee’s space grid model theory and the basic principle finite difference time domain method, and deduces a GPR forward system of equation of two dimensional spaces. The Mur super absorbed boundary condition is adopted to solve the super strong reflection on the interceptive boundary when there is the forward simulation. And a self-made program is used to process forward simulation to two typical geoelectricity model.
文摘The higher excited states for two dimensional finite rectangular well potential are calculated numerically,by solving the Schrödinger equation using the finite difference time domain method.Although,this method is suitable to calculate the ground state of the quantum systems,it has been improved to calculate the higher excited states directly.The improvement is based on modifying the iterative process involved in this method to include two procedures.The first is known as cooling steps and the second is known as a heating step.By determining the required length of the cooling iteration steps using suitable excitation energy estimate,and repeating these two procedures using suitable initial guess function for sufficient times.This modified iteration will lead automatically to the desired excited state.In the two dimensional finite rectangular well potential problem both of the suitable excitation energy and the suitable initial guess wave function are calculated analytically using the separation of variables technique.
文摘The rational design of the sample cell may improve the sensitivity of surface-enhanced Raman scattering （SERS） detection in a high degree. Finite difference time domain （FDTD） simulations of the configuration of Ag film-Ag particles illuminated by plane wave and evanescent wave are performed to provide physical insight for design of the sample cell. Numerical solutions indicate that the sample cell can provide more ＂hot spots＂ and the massive field intensity enhancement occurs in these ＂hot spots＂. More information on the nanometer character of the sample can be got because of gradient-field Raman （GFR） of evanescent wave. OCIS codes： 290.5860, 240.0310, 240.6680, 999.9999 （surface-enhanced Raman scattering）.
基金Project supported partly by the Open Research Program in State Key Laboratory of Millimeter Waves of China(Grant No.K200802)partly by the National Natural Science Foundation of China(Grant No.60971122)
文摘The transmission coefficients of electromagnetic （EM） waves due to a superconductor-dielectric superlattice are numerically calculated. Shift operator finite difference time domain （SO-FDTD） method is used in the analysis. By using the SO-FDTD method, the transmission spectrum is obtained and its characteristics are investigated for different thicknesses of superconductor layers and dielectric layers, from which a stop band starting from zero frequency can be apparently observed. The relation between this low-frequency stop band and relative temperature, and also the London penetration depth at a superconductor temperature of zero degree are discussed, separately. The low-frequency stop band properties of superconductor-dielectric superlattice thus are well disclosed.
基金This paper is supported by the Focused Subject Program of Beijing (No. XK104910598)Foundation for Returned Students of Ministry of Education, and Foundation of China University of Geosciences (Beijing).
文摘To improve the resolution of crosshole electromagnetic tomography, high precision of forward modeling is necessary. A pseudo-spectral time domain （PSTD） forward modeling was used to simulate electromagnetic wave propagation between two boreholes. The PSTD algorithm is based on the finite difference time domain （FDTD） method and uses the fast Fourier transform （FFT） algorithm for spatial derivatives in Maxwell＇s equations. Besides having the strongpoint of the FDTD method, the calculation precision of the PSTD algorithm is higher than that of the FDTD method under the same calculation condition. The forward modeling using the PSTD method will play an important role in enhancing the resolution of crosshole electromagnetic tomography.
文摘The electrical performance of radomes on high-speed aircraft can be influenced by the thermal and mechanical loads produced during high-speed flight,which can affect the detection dis-tance and accuracy of the guidance system.This paper presents a new method that uses the Finite Difference Time Domain(FDTD)method to calculate the electrical performance of radomes under Thermo-Mechanical-Electrical(TME)coupling.This method can accurately characterize the effects of material dielectric temperature drift and structural deformation on the electrical performance of the radome under flight conditions,enabling high-precision full-wave calculations of the broadband electrical performance of the radome.The method initiates by utilizing a Finite Element Grid Model(FE-GM)of the radome to sequentially acquire the radome's response temperature field and structural deformation field through thermal and mechanical simulations.Subsequently,spatial mapping techniques are developed to accurately incorporate the dielectric temperature drift and structural deformation of the radome into its Yee grid Electromagnetic(EM)simulation model.A verification case was designed to test the proposed method,and the results confirmed its high computational accuracy.Additionally,the effectiveness and necessity of the method were further demonstrated by analyzing the electrical performance of a fused silica ceramic radome used on a high-speed aircraft.
文摘Security monitoring system of coal mines is indispensable to ensure the safe and efficient production of colliery. Due to the special and narrow underground field of the coal mine, the electromagnetic interference can cause a series of misstatements and false positives on the monitoring system, which will severely hamper the safe production of coal industry. In this paper, first, the frequency characteristics of the interference source on the power line are extracted when equipment runs normally. Then the finite difference time domain method is introduced to analyze the effects of the electromagnetic interference parameters on the security monitoring signal line. And the interference voltage of the two terminal sides on the single line is taken as evaluating indexes. Finally, the electromagnetic interference parameters are optimized by orthogonal experimental design based on the MATLAB simulation on the normal operation of equipment.
基金supported by the National Natural ScienceFoundation of China (Grant No. 60471002)
文摘The characteristics of the periodic band gaps of the one dimension magnetized plasma photonic crystals are studied with the piecewise linear current density recursive convolution (PLCDRC) finite-differential time-domain (FDTD) method. In frequency-domain, the transmission coefficients of electromagnetic Gaussian pulses are computed, and the effects of the periodic structure constant, plasma layer thickness and parameters of plasma on the properties of periodic band gaps of magnetized photonic crystals are a...
基金supported by the Natural Science Foundation of the Higher Education Institutions of Guangxi Province in China(No.201202ZD010)
文摘We design a channel-drop filter(CDF)with a linear gradient microcavity in a two-dimensional(2D)photonic crystal(PC).The model of three-port CDF with reflector is used to achieve high quality factor(Q-factor)and 100%channel-drop efficiency.The research indicates that adjusting the distance between reference plane and reflector can simultaneously influence the Q-factor due to coupling to a bus waveguide and the phase retardation occurring in the round trip between a microcavity and a reflector.The calculation results of 2D finite-difference time-domain(FDTD)method show that the designed filter can achieve the drop efficiency of 96.7%and ultra-high Q-factor with an ultra-small modal volume.
基金supported by the National Key Basic Research Program of China(No.2007CB310403)
文摘This paper proposes an optical device which can continuously change the polarization state of terahertz （THz） waves. The device consists of metal gate, anU-refleetlon coatings, liquid crystal and mirror. By changing the refractive index of liquid crystal in the interface between the metal gate and the mirror, the phase difference between two beams with orthogonal polarization is varied and a continuous phase sliift is achieved. The phase shift of the device is calculated by using the finite difference time domain （FDTD） method, and the transmittance and reflectance are calculated by using the rigorous coupled wave analysis （RCWA） method. The results reveal that the structure can realize continuously tunable phase shift for THz wave at 1 THz.
基金surpported by the National 863 Project of China (No.2007AA03Z413)the National Nature Science Foundation of China (No.60727004)the Project of Education Office of Shanxi Province of China (No.09JS041)
文摘In this paper, a model of photonic crystal temperature sensor based on crystal microcavity in a straight photonic crystal waveguide is proposed. The transmission characteristics of light in the sensor under different temperatures are simulated by using finite-difference time-domain (FDTD) method. The thermal expansion and thermal-optic effects of silicon are taken into account. The results show that the resonant wavelength of microcavity increases linearly as the temperature rising. The wavelength shift along with temperature is 6.6 pm /℃.
基金supported by the National Natural Science Foundation of China(Nos.61379024 and 61131005)the Zhejiang Provincial Outstanding Youth Foundation(No.LR12F05001)
文摘We design a compact terahertz(THz) polarization beam splitter. Both plane wave expansion method and finite-difference time-domain method are used to calculate and analyze the characteristics of the proposed device. The designed polarization beam splitter can split TE-polarized and TM-polarized THz waves into different propagation directions. The simulation results show that the extinction ratios are larger than 18.36 dB for TE polarization and 13.35 dB for TM polarization in the frequency range from 1.86 THz to 1.91 THz, respectively. The designed polarization beam splitter has the advantages of small size and compact structure with a total size of 4.825 mm×0.400 mm.
基金Sponsored by the Ministerial Level Advanced Research Foundation (1006513002060)
文摘The factors affecting one dimensional （1D） and two dimensional （2D） photonic crystals （PhCs） are systemically analyzed in this paper by numerical simulation. Transfer matrix method （TMM） is employed for 1D PCs, both finite difference time domain method （FDTD） and plane wave expansion method （PWE） are employed for 2D PCs. The result shows that the photonic bandgaps （PBG） are directly affected by crystal type, crystal lattice constant, modulation of refractive index and periodicity, and it is should be useful for design of different type photonic crystals with the required PBG and functional devices. Finally, as an example, a near-IR 1D PCs narrow filter was designed.
基金Project(N110402015) supported by the Fundamental Research Funds for the Central Universities of ChinaProject(2012M510075) supported by China Postdoctoral Science Foundation
文摘Mid-infrared transmittance of submicron silver slit arrays was numerically studied with the finite difference time domain method. The slit width varies from 50 nm to 300 nm and a square feature may attach at either or both slit sides. Although the side length of features is one or two orders of magnitude shorter than the wavelength, the attached nanoscale features can modify the transmittance significantly. The transmittance was also further investigated in detail by looking into the electromagnetic fields and Poynting vectors of selected slit geometries. The investigation results show that such change can be attributed to the cavity resonance effect inside the slit arrays. The work is of great importance to the wavelength-selective devices design in optical devices and thermal application fields.
基金supported by the National Natural Science Foundation of China(No.61040064)
文摘A wavelength splitter with ultra-compact and simple structure is proposed and analyzed by using both plane wave expansion （PWE） method and finite difference time domain （FDTD） method. The device is based on directional coupling between two parallel lithium niobate （LiNbO3, LN） nanowire optical waveguides. The wavelength splitter with a coupling region length of 5 um can separate 1.3 um and 1.55 um wavelengths for corresponding outputs with transmittance higher than 97%.
基金Project(N130402006)supported by Fundamental Research Funds for the Central Universities,ChinaProject(51476024)supported by the National Natural Science Foundation of China
文摘The radiative properties(absorptance, reflectance, and transmittance) of deep slits with five nanoscale slit profile variations at the transverse magnetic wave incidence were numerically investigated by employing the finite difference time domain method. For slits with attached features, their radiative properties can be much different due to the modified cavity geometry and dangled structures, even at wavelengths between 3 and 15 μm. The shifts of cavity resonance excitation result in higher transmittance through narrower slits at specific wavelengths and resonance modes are confirmed with the electromagnetic fields. Opposite roles possibly played by features in increasing or decreasing absorptance are determined by the feature position and demonstrated by Poynting vectors. Correlations among all properties of a representative slit array and the slit density are also comprehensively studied. When multiple slit types coexist in an array(complex slits), a wide-band transmittance or absorptance enhancement is feasible by merging spectral peaks contributed from each type of slits distinctively. Discrepancy among infrared properties of four selected slit combinations is explained while effects of slit density are also discussed.
基金supported by the National Key Basic Research Special Fund of China (No.2007CB613404)the National High Technology,Research and Development Program of China (No.2011AA010303)the National Natural Science Foundation of China (Nos.61090390,60837001,60977045,60877014 and 60776057)
文摘We demonstrate a novel SOI-based photonic crystal（PC） double-heterostructure slot waveguide microcavity constructed by cascading three PC slot waveguides with different slot widths,and simulate the luminescence enhancement of sol-gel Er-doped SiO2 filled in the microcavity by finite-difference time-domain（FDTD） method.The calculated results indicate that a unique sharp resonant peak dominates in the spectrum at the expected telecommunication wavelength of 1.5509 mm,with very high normalized peak intensity of ~108.The electromagnetic field of the resonant mode exhibits the strongest in the microcavity,and decays rapidly to zero along both sides,which means that the resonant mode field is well confined in the microcavity.The simulation results fully verify the enhancement of luminescence by PC double-heterostructure slot waveguide microcavity theoretically,which is a promising way to realize the high-efficiency luminescence of Si-based materials.
基金Project(2009AA05Z215) supported by the National High-Tech Research and Development Program of China
文摘The radiative properties of three different materials surfaces with one-dimensional microscale random roughness were obtained with the finite difference time domain method(FDTD) and near-to-far-field transformation.The surface height conforms to the Gaussian probability density function distribution.Various computational modeling issues that affect the accuracy of the predicted properties were discussed.The results show that,for perfect electric conductor(PEC) surfaces,as the surface roughness increases,the magnitude of the spike reduces and eventually the spike disappears,and also as the ratio of root mean square roughness to the surface correlation distance increases,the retroreflection becomes evident.The predicted values of FDTD solutions are in good agreement with the ray tracing and integral equation solutions.The overall trend of bidirectional reflection distribution function(BRDF) of PEC surfaces and silicon surfaces is the same,but the silicon's is much less than the former's.The BRDF difference from two polarization modes for the gold surfaces is little for smaller wavelength,but it is much larger for the longer wavelength and the FDTD simulation results agree well with the measured data.In terms of PEC surfaces,as the incident angle increases,the reflectivity becomes more specular.
基金supported by the National Natural Science Foundation of China (Nos.10904176 and 11004169)the NMOE Project of China (Nos.200911002 and 2010110009)
文摘The light propagation characteristics through the annular coupled-resonator cavity waveguides are systematically analyzed by the finite-difference time-domain (FDTD) method. It is found that this kind of waveguide has more minbands owing to the increasing of the cavity’s size, compared with the traditional line-typed coupled-resonator waveguide. The group velocity of light propagation can be reduced for a further degree when the adjacent annular cavities are interlaced in the perpendicular direction, and a group velocity about 0.00067c (c is the light speed in vacuum) can be obtained.
基金Project supported by the National Natural Science Foundation of China （Grant Nos. 11174237 and 10974161）, the National Basic Research Program of China （Grant No. 2013CB328904）, the Fundamental Research Funds for the Central Universities of Ministry of Education of China （Grant Nos. SWJTU 12CX084 and SWJTU2（/10ZT06）, and the Innovation Fund for Ph.D. Student of Southwest Jiaotong University, China.
文摘A unidirectional surface plasmon polaritons(SPPs) generator with greatly enhanced generation efficiency is proposed. The SPPs generator consists of an asymmetric single nanoslit coated with a polyviny alcohol(PVA) film and a silver rectangle block. The generation efficiency of this SPPs generator is investigated using the finite difference time domain method. Due to the presence of the silver rectangle block, the SPPs generation efficiency of the asymmetric single nanoslit with PVA film can be greatly enhanced and the corresponding wavelength with the maximum enhancement factor can be tuned flexibly. The influence of the structural parameters on the generation efficiency is also investigated for the enhanced unidirectional SPPs generator.
