In this paper, an explicit finite element method to analyze the dynamic responses of three-medium coupled systems with any terrain is developed on the basis of the numerical simulation of the continuous conditions on ...In this paper, an explicit finite element method to analyze the dynamic responses of three-medium coupled systems with any terrain is developed on the basis of the numerical simulation of the continuous conditions on the bounda-ries among fluid saturated porous medium, elastic single-phase medium and ideal fluid medium. This method is a very effective one with the characteristic of high calculating speed and small memory needed because the formulae for this explicit finite element method have the characteristic of decoupling, and which does not need to solve sys-tem of linear equations. The method is applied to analyze the dynamic response of a reservoir with considering the dynamic interactions among water, dam, sediment and basement rock. The vertical displacement at the top point of the dam is calculated and some conclusions are given.展开更多
A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to ...A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 ram/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.展开更多
The dynamic inhomogeneous finite element method is studied for use in the transient analysis of one dimensional inhomogeneous media. The general formula of the inhomogeneous consistent mass matrix is established based...The dynamic inhomogeneous finite element method is studied for use in the transient analysis of one dimensional inhomogeneous media. The general formula of the inhomogeneous consistent mass matrix is established based on the shape function. In order to research the advantages of this method, it is compared with the general finite element method. A linear bar element is chosen for the discretization tests of material parameters with two fictitious distributions. And, a numerical example is solved to observe the differences in the results between these two methods. Some characteristics of the dynamic inhomogeneous finite element method that demonstrate its advantages are obtained through comparison with the general finite element method. It is found that the method can be used to solve elastic wave motion problems with a large element scale and a large number of iteration steps.展开更多
ANSYS, the software of construction analysis, is used to analyze static and dynamic performances of a XH2408 gantry style numerical control （NC） milling machining center and optimize its construction using the finit...ANSYS, the software of construction analysis, is used to analyze static and dynamic performances of a XH2408 gantry style numerical control （NC） milling machining center and optimize its construction using the finite element method. First, a finite element model is established and the static and dynamic analysis are completed as constraints and loads applied on the finite element model. It is found that both spindle box and gantry are the worst components of assembly in performance. Secondly, the spindle box and gantry are chosen as objects of optimal design separately, aiming to improve their performance. The optimal plans are accomplished on the basis of the minimum volume for the spindle box and the maximum inherent frequency for the gantry subject to the constrains. Finally, the machine tool improved is analyzed statically and dynamically based on the optimal results of the spindle box and gantry. The results show that optimal design with the finite element method increases static and dynamical performances of the XH2408 gantry style numerical control milling machining center and the technique is effective and practical in engineering applications.展开更多
The present paper is addressed to the finite element method combined with dynamic photoelastic analysis of propagating cracks, that is, on the basis of [1] by Chien Wei-zang, finite elements which incorporate the prop...The present paper is addressed to the finite element method combined with dynamic photoelastic analysis of propagating cracks, that is, on the basis of [1] by Chien Wei-zang, finite elements which incorporate the propagating crack-tip singularity intrinsic to two-dimensional elasticity are employed. THe relation between crack opening length and time step obtained from dynamic photoelaslie analysis is used as a definite condition for solving the dynamic equations and simulating the crack propagations as well As an example, the impact response of dynamie-bending-test specimen is investigated and the dynamic stress-intensity factor obtained from the mentioned finite element analysis and dynamic photoelasticity is in reasonable agreement with each other.展开更多
Taking CPU time cost and analysis accuracy into account, dynamic explicit finite ele- ment method is adopted to optimize the forming process of autobody panels that often have large sizes and complex geometry. In this...Taking CPU time cost and analysis accuracy into account, dynamic explicit finite ele- ment method is adopted to optimize the forming process of autobody panels that often have large sizes and complex geometry. In this paper, for the sake of illustrating in detail how dynamic explicit finite element method is applied to the numerical simulation of the autobody panel forming process,an example of optimization of stamping process pain meters of an inner door panel is presented. Using dynamic explicit finite element code Ls-DYNA3D, the inner door panel has been optimized by adapting pa- rameters such as the initial blank geometry and position, blank-holder forces and the location of drawbeads, and satisfied results are obtained.展开更多
Due to the current trend towards lightweight design in automotive industry,hollow stepped gear shafts for automobile and its radial forging process are widely investigated.Utilizing coupled finite element thermo-mecha...Due to the current trend towards lightweight design in automotive industry,hollow stepped gear shafts for automobile and its radial forging process are widely investigated.Utilizing coupled finite element thermo-mechanical model,radial forging process of a hollow stepped gear shaft for automobile was simulated.The optimal combination of three process parameters including initial temperature,rotation rate and radial reduction was also selected using orthogonal design method.To examine the strain inhomogeneity of the forging workpiece,the strain inhomogeneity factor was introduced.The results reveal that the maximum effective strain and the minimum effective strain appeared in the outermost and innermost zones of different cross sections for the hollow stepped gear shaft,respectively.Optimal forging parameters are determined as a combination of initial temperature of 780°C,rotation rate of 21°/stroke and radial reduction of 3 mm.展开更多
An adaptive finite element procedure designed for specific computational goals is presented,using mesh refinement strategies based on optimal or nearly optimal a priori error estimates for the finite element method an...An adaptive finite element procedure designed for specific computational goals is presented,using mesh refinement strategies based on optimal or nearly optimal a priori error estimates for the finite element method and using estimators of the local regularity of the unknown exact solution derived from computed approximate solutions.The proposed procedure is analyzed in detail for a non-trivial class of corner problems and shown to be efficient in the sense that the method can generate the correct type of refinements and lead to the desired control under consideration.展开更多
The finite element analysis （FEA） software Ansys was employed to study the stress state of the dies of both plane and non-plane parting face structures with uniform interference and the die of plane parting face str...The finite element analysis （FEA） software Ansys was employed to study the stress state of the dies of both plane and non-plane parting face structures with uniform interference and the die of plane parting face structure with non-uniform interference. Considering the symmetry of the die, a half gear tooth model of the two-ring assembled die with 2.5 GPa inner pressure was constructed. Four paths were defined to investigate the stress state at the bottom comer of the die where stress concentration was serious. FEA results show that the change of parting face from non-plane to plane can greatly reduce the stress at the teeth tips of the die so that the tip fracture is avoided. The interference structure of the die is the most important influencing factor for the stress concentration at the bottom comer. When non-uniform interference is adopted the first principal stress at the comer on the defined paths of the die is much lower than that with uniform interference. The bottom hole radius is another important influencing factor for the comer stress concentration. The first principal stress at the comer of the plane parting face die with non-uniform interference is reduced from 2.3 to 1.9 GPa when the hole radius increases from 12.5 to 16.0 mm. The optimization of the die structure increases the life of the die from 100 to 6 000 hits.展开更多
The load condition of the mineral sizer is discussed. Acoording to three typical load cases presented, FEM and optimization models are established. Computed the model problems by use of ANSYS software and sequential u...The load condition of the mineral sizer is discussed. Acoording to three typical load cases presented, FEM and optimization models are established. Computed the model problems by use of ANSYS software and sequential unconstrained minimization technique, the stress distribution on c rush tooth and it's optimal shape are aquired. After analyzing the results, the relation between stress distribution and structural parameters is presented.展开更多
A coupled element modeling method is proposed for global dynamic analyses of unbonded flexible risers.Owing to the multi-layer structure of unbonded flexible risers, the global-dynamic-analysis method applied to the s...A coupled element modeling method is proposed for global dynamic analyses of unbonded flexible risers.Owing to the multi-layer structure of unbonded flexible risers, the global-dynamic-analysis method applied to the steel rigid risers is insufficient for flexible risers. The main challenges lie in the enormous difference between the anti-tension and anti-binding capacity of unbonded flexible risers which results in serious ill-conditional calculation in global dynamic analysis. In order to solve this problem, the coupled element modeling approach was proposed in this study. A time domain fatigue analysis was applied to illustrate the necessity of the proposed approach.A dynamic benchmark case is used to demonstrate the accuracy of the coupled element method respectively.Subsequently the validated coupling element method is employed to conduct the global dynamic analyses for a free hanging flexible riser. The results demonstrate that the proposed approach can give the accurate global dynamic response under the guidance of the fatigue failure mode for unbonded flexible riser. The parametric influence analyses also provide a practical and effective way for predicting the global dynamic response.展开更多
Through a great deal calculation, the design and simulation analysis of stator parametric and rotor electromagnetic system of 1000MW turbo-generator are performed by using Ansoft Maxwell Rmxprt12.1 software. Besides. ...Through a great deal calculation, the design and simulation analysis of stator parametric and rotor electromagnetic system of 1000MW turbo-generator are performed by using Ansoft Maxwell Rmxprt12.1 software. Besides. the basic parameters of the generator, the geometry dimensions of the stator and rotor, type and sizes of the slots, coils and windings parameters and the way of windings connection are determined. The finite element model of electromagnetic systems of generator stator and rotor was constructed by Ansoft Maxwe112D3D 12.1, and the transient electromagnetic characteristics of generator was analyzed and simulated. The 3D geometric models of turbo-generator were established respectively by using PROE software, and the dynamic finite element model of generator structure was built by ANSYS workbench 11.0. In addition, the dynamic characteristics of stator iron core, stator frame were calculated respectively. The simulation calculation has shown that the structural parameters, material parameters, and the electromagnetic characteristics parameters for large turbogenerator that are put forward by this paper should be optimal. and the design plan and method suggested by this paper should be feasible. The paper provides an effective solution for the development of larger turbo-generator than 1000 MW.展开更多
A semi-analytical and semi-numerical method is proposed for the dynamic analysis of foundations. The Lamb＇s solution and the approximate formulae were used to establish the relation of the contact force and deflectio...A semi-analytical and semi-numerical method is proposed for the dynamic analysis of foundations. The Lamb＇s solution and the approximate formulae were used to establish the relation of the contact force and deflection between the foundation and soil. Therefore, the foundation can be separated from soil and analyzed by FEM as for the static cases. The plate can be treated as that the known forces are acting on the upper surface, and the contact pressure from soil can be represented as the deflection. So that only the plate needs to be divided into elements in the analysis. By this method, a series of vibration problems, including various shapes and rigidities of foundations, different excitation frequencies, were analyzed. Furthermore, it can be used for the embedded foundation. The numerical examples show that this method has simplicity, highly accurate and versatile. It is an effective method for the dynamic analysis of foundations.展开更多
3D dynamic analysis models of 1000 m deep-ocean mining pipeline, including steel lift pipe, pump, buffer and flexible hose, were established by finite element method (FEM). The coupling effect of steel lift pipe and f...3D dynamic analysis models of 1000 m deep-ocean mining pipeline, including steel lift pipe, pump, buffer and flexible hose, were established by finite element method (FEM). The coupling effect of steel lift pipe and flexible hose, and main external loads of pipeline were considered in the models, such as gravity, buoyancy, hydrodynamic forces, internal and external fluid pressures, concentrated suspension buoyancy on the flexible hose, torsional moment and axial force induced by pump working. Some relevant FEM models and solution techniques were developed, according to various 3D transient behaviors of integrated deep-ocean mining pipeline, including towing motions of track-keeping operation and launch process of pipeline. Meanwhile, an experimental verification system in towing water tank that had similar characteristics of designed mining pipeline was developed to verify the accuracy of the FEM models and dynamic simulation. The experiment results show that the experimental records and simulation results of stress of pipe are coincided. Based on the further simulations of 1 000 m deep-ocean mining pipeline, the simulation results show that, to form configuration of a saddle shape, the total concentrated suspension buoyancy of flexible hose should be 95%?105% of the gravity of flexible hose in water, the first suspension point occupies 1/3 of the total buoyancy, and the second suspension point occupies 2/3 of the total buoyancy. When towing velocity of mining system is less than 0.5 m/s, the towing track of buffer is coincided with the setting route of ship on the whole and the configuration of flexible hose is also kept well.展开更多
In this paper the optimal model of the main energy absorbed structure in an auto-body “front rail”, based on structural crashworthiness is built. For an optimal design on structure crashworthiness, the new method is...In this paper the optimal model of the main energy absorbed structure in an auto-body “front rail”, based on structural crashworthiness is built. For an optimal design on structure crashworthiness, the new method is based on a response surface model and Pareto GA, which improves the efficiency and flexibility of an optimal design, that is brought forward. The traditional optimal method can not be applied in the design of an impact structure due to the high nonlinearity and large time cost of crashworthiness FE analysis. So the method of an optimal design based on crashworthiness is brought forward. After constructing the response surface model of auto-body crashworthiness, the Pareto GA can be applied to find the multi-objective globally. The optimal solution set can then be used to provide many scheme combinations for choice structural parameters.To acquire the optimized structure parameters on front rail crashworthiness, this simplified model of an original design is built. After studying various ways of reinforcing the cross-section to control the structural failure mode, a better method has been found. On the precondition of not increasing the mass of the structure, an optimal design of the front rail is performed further. Finally, the optimized scheme is implemented in the full-car impact analysis and crashworthiness is studied. With proper measures to control deformation of the front rail structure the crashworthiness can be improved with minor structural modifications.展开更多
This paper presents the optimal control variational principle for Perzyna modelwhich is one of the main constitutive relation of viscoplasticity in dynamics. And itcould also be transformed to solve the parametric qua...This paper presents the optimal control variational principle for Perzyna modelwhich is one of the main constitutive relation of viscoplasticity in dynamics. And itcould also be transformed to solve the parametric quadratic programming problem.The FEM form of this problem and its implementation have also been discussed in thepaper.展开更多
This paper aims to study a second-order semi-implicit BDF finite element scheme for the Kuramoto-Tsuzuki equations in two dimensional and three dimensional spaces.The proposed scheme is stable and the nonlinear term i...This paper aims to study a second-order semi-implicit BDF finite element scheme for the Kuramoto-Tsuzuki equations in two dimensional and three dimensional spaces.The proposed scheme is stable and the nonlinear term is linearized by the extrapolation technique.Moreover,we prove that the error estimate in L^(2)-norm is unconditionally optimal which means that there has not any restriction on the time step and the mesh size.Finally,numerical results are displayed to illustrate our theoretical analysis.展开更多
There is a common difficulty in elastic-plastic impact codes such as EPIC[2,3] NONSAP[4], etc.. Most of these codes use the simple linear functions usually taken from static problem to represent the displacement compo...There is a common difficulty in elastic-plastic impact codes such as EPIC[2,3] NONSAP[4], etc.. Most of these codes use the simple linear functions usually taken from static problem to represent the displacement components. In such finite element formulation, the stress components are constant in each element and they are discontinuous in any two neighboring elements. Therefore, the bases of using the virtual work principle in such elements are unreliable. In this paper, we introduce a new method, namely, the compatible stress iterative method, to eliminate the above-said difficulty. The calculated examples show that the calculation using the new method in dynamic finite element analysis of high velocity impact is valid and stable, and the element stiffness can be somewhat reduced.展开更多
An approach based on the superelement theory is proposed, and it is applied to model the car's body-in-white as well as to dynamic simulation and optimization. This approach can improve the calculation speed and d...An approach based on the superelement theory is proposed, and it is applied to model the car's body-in-white as well as to dynamic simulation and optimization. This approach can improve the calculation speed and do the dynamic optimization among substructures respectively in the car's body design. To meet the car's design of harshness, a dynamic optimal design model, based on the mean square of vertical displacement response at two points of the car floor, is proposed. Satisfactory results are achieved.展开更多
The low accuracy using unstructured meshes to solve complicated geometry problems is a significant challenge in practical engineering.It is the key to solve this issue through enhancing the accuracy of tetrahedral ele...The low accuracy using unstructured meshes to solve complicated geometry problems is a significant challenge in practical engineering.It is the key to solve this issue through enhancing the accuracy of tetrahedral element.This work develops a simple strategy to enhance the accuracy of tetrahedral element with the Shepard interpolation function.In which the strain field is reconstructed by introducing the weighted strains of adjacent tetrahedral elements to central tetrahedral element.The stiffness of the discrete system is significantly softened with this simple operation,which leads to a great accuracy improvement.Furthermore,this simple modification makes linear tetrahedral element owns higher accuracy even compared with hexahedral element.The high precision tetrahedral element makes finite element analysis more acceptable for engineers.It provides a novel solution to finite element analysis using unstructured meshes for practical engineering problems with complicated geometry.In order to validate the accuracy and feasibility of present modified tetrahedral element(M-T4)in complicated geometry problems,several engineering examples are performed,including linear static analysis,modal analysis,frequency response analysis,transient response analysis,and response spectrum analysis.The remarkable performance of the M-T4 suggests its wide applicability to practical engineering problems.展开更多
基金National Natural Scienccs Foundation of China (50178005).
文摘In this paper, an explicit finite element method to analyze the dynamic responses of three-medium coupled systems with any terrain is developed on the basis of the numerical simulation of the continuous conditions on the bounda-ries among fluid saturated porous medium, elastic single-phase medium and ideal fluid medium. This method is a very effective one with the characteristic of high calculating speed and small memory needed because the formulae for this explicit finite element method have the characteristic of decoupling, and which does not need to solve sys-tem of linear equations. The method is applied to analyze the dynamic response of a reservoir with considering the dynamic interactions among water, dam, sediment and basement rock. The vertical displacement at the top point of the dam is calculated and some conclusions are given.
基金Projects(51275235, 50975135) supported by the National Natural Science Foundation of ChinaProject(U0934004) supported by the Natural Science Foundation of Guangdong Province, ChinaProject(2011CB707602) supported by the National Basic Research Program of China
文摘A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 ram/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.
基金the Fundamental Research Funds for the Central Universities under Grant No.HEUCFZ1125National Natural Science Foundation of China under Grant No.10972064
文摘The dynamic inhomogeneous finite element method is studied for use in the transient analysis of one dimensional inhomogeneous media. The general formula of the inhomogeneous consistent mass matrix is established based on the shape function. In order to research the advantages of this method, it is compared with the general finite element method. A linear bar element is chosen for the discretization tests of material parameters with two fictitious distributions. And, a numerical example is solved to observe the differences in the results between these two methods. Some characteristics of the dynamic inhomogeneous finite element method that demonstrate its advantages are obtained through comparison with the general finite element method. It is found that the method can be used to solve elastic wave motion problems with a large element scale and a large number of iteration steps.
文摘ANSYS, the software of construction analysis, is used to analyze static and dynamic performances of a XH2408 gantry style numerical control （NC） milling machining center and optimize its construction using the finite element method. First, a finite element model is established and the static and dynamic analysis are completed as constraints and loads applied on the finite element model. It is found that both spindle box and gantry are the worst components of assembly in performance. Secondly, the spindle box and gantry are chosen as objects of optimal design separately, aiming to improve their performance. The optimal plans are accomplished on the basis of the minimum volume for the spindle box and the maximum inherent frequency for the gantry subject to the constrains. Finally, the machine tool improved is analyzed statically and dynamically based on the optimal results of the spindle box and gantry. The results show that optimal design with the finite element method increases static and dynamical performances of the XH2408 gantry style numerical control milling machining center and the technique is effective and practical in engineering applications.
文摘The present paper is addressed to the finite element method combined with dynamic photoelastic analysis of propagating cracks, that is, on the basis of [1] by Chien Wei-zang, finite elements which incorporate the propagating crack-tip singularity intrinsic to two-dimensional elasticity are employed. THe relation between crack opening length and time step obtained from dynamic photoelaslie analysis is used as a definite condition for solving the dynamic equations and simulating the crack propagations as well As an example, the impact response of dynamie-bending-test specimen is investigated and the dynamic stress-intensity factor obtained from the mentioned finite element analysis and dynamic photoelasticity is in reasonable agreement with each other.
文摘Taking CPU time cost and analysis accuracy into account, dynamic explicit finite ele- ment method is adopted to optimize the forming process of autobody panels that often have large sizes and complex geometry. In this paper, for the sake of illustrating in detail how dynamic explicit finite element method is applied to the numerical simulation of the autobody panel forming process,an example of optimization of stamping process pain meters of an inner door panel is presented. Using dynamic explicit finite element code Ls-DYNA3D, the inner door panel has been optimized by adapting pa- rameters such as the initial blank geometry and position, blank-holder forces and the location of drawbeads, and satisfied results are obtained.
基金Projects(51774054,51974050)supported by the National Natural Science Foundation of China。
文摘Due to the current trend towards lightweight design in automotive industry,hollow stepped gear shafts for automobile and its radial forging process are widely investigated.Utilizing coupled finite element thermo-mechanical model,radial forging process of a hollow stepped gear shaft for automobile was simulated.The optimal combination of three process parameters including initial temperature,rotation rate and radial reduction was also selected using orthogonal design method.To examine the strain inhomogeneity of the forging workpiece,the strain inhomogeneity factor was introduced.The results reveal that the maximum effective strain and the minimum effective strain appeared in the outermost and innermost zones of different cross sections for the hollow stepped gear shaft,respectively.Optimal forging parameters are determined as a combination of initial temperature of 780°C,rotation rate of 21°/stroke and radial reduction of 3 mm.
文摘An adaptive finite element procedure designed for specific computational goals is presented,using mesh refinement strategies based on optimal or nearly optimal a priori error estimates for the finite element method and using estimators of the local regularity of the unknown exact solution derived from computed approximate solutions.The proposed procedure is analyzed in detail for a non-trivial class of corner problems and shown to be efficient in the sense that the method can generate the correct type of refinements and lead to the desired control under consideration.
基金Project(2006BAF04B06) supported by the National Key Technology R & D Program of ChinaProject(2005AA101B19) supported by the Key Technology R & D Program of Hubei Province, China
文摘The finite element analysis （FEA） software Ansys was employed to study the stress state of the dies of both plane and non-plane parting face structures with uniform interference and the die of plane parting face structure with non-uniform interference. Considering the symmetry of the die, a half gear tooth model of the two-ring assembled die with 2.5 GPa inner pressure was constructed. Four paths were defined to investigate the stress state at the bottom comer of the die where stress concentration was serious. FEA results show that the change of parting face from non-plane to plane can greatly reduce the stress at the teeth tips of the die so that the tip fracture is avoided. The interference structure of the die is the most important influencing factor for the stress concentration at the bottom comer. When non-uniform interference is adopted the first principal stress at the comer on the defined paths of the die is much lower than that with uniform interference. The bottom hole radius is another important influencing factor for the comer stress concentration. The first principal stress at the comer of the plane parting face die with non-uniform interference is reduced from 2.3 to 1.9 GPa when the hole radius increases from 12.5 to 16.0 mm. The optimization of the die structure increases the life of the die from 100 to 6 000 hits.
文摘The load condition of the mineral sizer is discussed. Acoording to three typical load cases presented, FEM and optimization models are established. Computed the model problems by use of ANSYS software and sequential unconstrained minimization technique, the stress distribution on c rush tooth and it's optimal shape are aquired. After analyzing the results, the relation between stress distribution and structural parameters is presented.
基金the National Natural Science Foundation of China(Nos.51379005 and 51009093)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20120073120014)
文摘A coupled element modeling method is proposed for global dynamic analyses of unbonded flexible risers.Owing to the multi-layer structure of unbonded flexible risers, the global-dynamic-analysis method applied to the steel rigid risers is insufficient for flexible risers. The main challenges lie in the enormous difference between the anti-tension and anti-binding capacity of unbonded flexible risers which results in serious ill-conditional calculation in global dynamic analysis. In order to solve this problem, the coupled element modeling approach was proposed in this study. A time domain fatigue analysis was applied to illustrate the necessity of the proposed approach.A dynamic benchmark case is used to demonstrate the accuracy of the coupled element method respectively.Subsequently the validated coupling element method is employed to conduct the global dynamic analyses for a free hanging flexible riser. The results demonstrate that the proposed approach can give the accurate global dynamic response under the guidance of the fatigue failure mode for unbonded flexible riser. The parametric influence analyses also provide a practical and effective way for predicting the global dynamic response.
文摘Through a great deal calculation, the design and simulation analysis of stator parametric and rotor electromagnetic system of 1000MW turbo-generator are performed by using Ansoft Maxwell Rmxprt12.1 software. Besides. the basic parameters of the generator, the geometry dimensions of the stator and rotor, type and sizes of the slots, coils and windings parameters and the way of windings connection are determined. The finite element model of electromagnetic systems of generator stator and rotor was constructed by Ansoft Maxwe112D3D 12.1, and the transient electromagnetic characteristics of generator was analyzed and simulated. The 3D geometric models of turbo-generator were established respectively by using PROE software, and the dynamic finite element model of generator structure was built by ANSYS workbench 11.0. In addition, the dynamic characteristics of stator iron core, stator frame were calculated respectively. The simulation calculation has shown that the structural parameters, material parameters, and the electromagnetic characteristics parameters for large turbogenerator that are put forward by this paper should be optimal. and the design plan and method suggested by this paper should be feasible. The paper provides an effective solution for the development of larger turbo-generator than 1000 MW.
文摘A semi-analytical and semi-numerical method is proposed for the dynamic analysis of foundations. The Lamb＇s solution and the approximate formulae were used to establish the relation of the contact force and deflection between the foundation and soil. Therefore, the foundation can be separated from soil and analyzed by FEM as for the static cases. The plate can be treated as that the known forces are acting on the upper surface, and the contact pressure from soil can be represented as the deflection. So that only the plate needs to be divided into elements in the analysis. By this method, a series of vibration problems, including various shapes and rigidities of foundations, different excitation frequencies, were analyzed. Furthermore, it can be used for the embedded foundation. The numerical examples show that this method has simplicity, highly accurate and versatile. It is an effective method for the dynamic analysis of foundations.
基金Project(DY105-3-2-2) supported by China Ocean Mineral Resources Research and Development Association(COMRA)Project(50675226) supported by the National Natural Science Foundation of China
文摘3D dynamic analysis models of 1000 m deep-ocean mining pipeline, including steel lift pipe, pump, buffer and flexible hose, were established by finite element method (FEM). The coupling effect of steel lift pipe and flexible hose, and main external loads of pipeline were considered in the models, such as gravity, buoyancy, hydrodynamic forces, internal and external fluid pressures, concentrated suspension buoyancy on the flexible hose, torsional moment and axial force induced by pump working. Some relevant FEM models and solution techniques were developed, according to various 3D transient behaviors of integrated deep-ocean mining pipeline, including towing motions of track-keeping operation and launch process of pipeline. Meanwhile, an experimental verification system in towing water tank that had similar characteristics of designed mining pipeline was developed to verify the accuracy of the FEM models and dynamic simulation. The experiment results show that the experimental records and simulation results of stress of pipe are coincided. Based on the further simulations of 1 000 m deep-ocean mining pipeline, the simulation results show that, to form configuration of a saddle shape, the total concentrated suspension buoyancy of flexible hose should be 95%?105% of the gravity of flexible hose in water, the first suspension point occupies 1/3 of the total buoyancy, and the second suspension point occupies 2/3 of the total buoyancy. When towing velocity of mining system is less than 0.5 m/s, the towing track of buffer is coincided with the setting route of ship on the whole and the configuration of flexible hose is also kept well.
文摘In this paper the optimal model of the main energy absorbed structure in an auto-body “front rail”, based on structural crashworthiness is built. For an optimal design on structure crashworthiness, the new method is based on a response surface model and Pareto GA, which improves the efficiency and flexibility of an optimal design, that is brought forward. The traditional optimal method can not be applied in the design of an impact structure due to the high nonlinearity and large time cost of crashworthiness FE analysis. So the method of an optimal design based on crashworthiness is brought forward. After constructing the response surface model of auto-body crashworthiness, the Pareto GA can be applied to find the multi-objective globally. The optimal solution set can then be used to provide many scheme combinations for choice structural parameters.To acquire the optimized structure parameters on front rail crashworthiness, this simplified model of an original design is built. After studying various ways of reinforcing the cross-section to control the structural failure mode, a better method has been found. On the precondition of not increasing the mass of the structure, an optimal design of the front rail is performed further. Finally, the optimized scheme is implemented in the full-car impact analysis and crashworthiness is studied. With proper measures to control deformation of the front rail structure the crashworthiness can be improved with minor structural modifications.
文摘This paper presents the optimal control variational principle for Perzyna modelwhich is one of the main constitutive relation of viscoplasticity in dynamics. And itcould also be transformed to solve the parametric quadratic programming problem.The FEM form of this problem and its implementation have also been discussed in thepaper.
基金supported by the Natural Science Foundation of Zhejiang Province with Grant No.LY18A010021.
文摘This paper aims to study a second-order semi-implicit BDF finite element scheme for the Kuramoto-Tsuzuki equations in two dimensional and three dimensional spaces.The proposed scheme is stable and the nonlinear term is linearized by the extrapolation technique.Moreover,we prove that the error estimate in L^(2)-norm is unconditionally optimal which means that there has not any restriction on the time step and the mesh size.Finally,numerical results are displayed to illustrate our theoretical analysis.
文摘There is a common difficulty in elastic-plastic impact codes such as EPIC[2,3] NONSAP[4], etc.. Most of these codes use the simple linear functions usually taken from static problem to represent the displacement components. In such finite element formulation, the stress components are constant in each element and they are discontinuous in any two neighboring elements. Therefore, the bases of using the virtual work principle in such elements are unreliable. In this paper, we introduce a new method, namely, the compatible stress iterative method, to eliminate the above-said difficulty. The calculated examples show that the calculation using the new method in dynamic finite element analysis of high velocity impact is valid and stable, and the element stiffness can be somewhat reduced.
文摘An approach based on the superelement theory is proposed, and it is applied to model the car's body-in-white as well as to dynamic simulation and optimization. This approach can improve the calculation speed and do the dynamic optimization among substructures respectively in the car's body design. To meet the car's design of harshness, a dynamic optimal design model, based on the mean square of vertical displacement response at two points of the car floor, is proposed. Satisfactory results are achieved.
基金supported by the National Key R&D Program of China(No.2022YFB2503505)National Natural Science Foundation of China(No.12002124)+3 种基金National Natural Science Foundation of China(No.12302259)China Postdoctoral Science Foundation(No.2021M690965)Changsha Municipal Natural Science Foundation(No.kq2014035)Natural Science Foundation of Hunan Province(No.2022JJ40031).
文摘The low accuracy using unstructured meshes to solve complicated geometry problems is a significant challenge in practical engineering.It is the key to solve this issue through enhancing the accuracy of tetrahedral element.This work develops a simple strategy to enhance the accuracy of tetrahedral element with the Shepard interpolation function.In which the strain field is reconstructed by introducing the weighted strains of adjacent tetrahedral elements to central tetrahedral element.The stiffness of the discrete system is significantly softened with this simple operation,which leads to a great accuracy improvement.Furthermore,this simple modification makes linear tetrahedral element owns higher accuracy even compared with hexahedral element.The high precision tetrahedral element makes finite element analysis more acceptable for engineers.It provides a novel solution to finite element analysis using unstructured meshes for practical engineering problems with complicated geometry.In order to validate the accuracy and feasibility of present modified tetrahedral element(M-T4)in complicated geometry problems,several engineering examples are performed,including linear static analysis,modal analysis,frequency response analysis,transient response analysis,and response spectrum analysis.The remarkable performance of the M-T4 suggests its wide applicability to practical engineering problems.
