The effects of gradient nanostructures induced by supersonic fine particle bombardment(SFPB)on the surface integrity,microstructural evolution,and mechanical properties of a Ni-W-Co-Ta medium-heavy alloy(MHA)were syst...The effects of gradient nanostructures induced by supersonic fine particle bombardment(SFPB)on the surface integrity,microstructural evolution,and mechanical properties of a Ni-W-Co-Ta medium-heavy alloy(MHA)were systematically investigated.The results show that gradient nanostructures are formed on the surface of Ni-W-Co-Ta MHA after SFPB treatment.At a gas pressure of 1.0 MPa and an impact time of 60 s,the ultimate tensile strength and yield strength of the alloy reached the maximum values of 1236 MPa and 758 MPa,respectively,which are 22.5%and 38.8%higher than those of the solid solution treated alloy,and the elongation(46.3%)is close to that of the solid solution treated alloy,achieving the optimal strength–ductility synergy.However,microcracks appear on the surface with excessive gas pressure and impact time,generating the relaxed residual stress and decreased strength.With the increase of the impact time and gas pressure,the depth of the deformation layer and the surface microhardness gradually increase,reaching the maximum values(29μm and HV 451)at 1.0 MPa and 120 s.The surface grain size is refined to a minimum of 11.67 nm.Notably,SFPB treatment has no obvious effect on elongation,and the fracture mode changes from the ductile fracture before treatment to ductile–brittle mixed fracture after treatment.展开更多
This work was attempted to modify the current technology for thermal barrier coatings（TBCs） by adding an additional step of surface modification,namely,supersonic fine particles bombarding（SFPB） process,on bond co...This work was attempted to modify the current technology for thermal barrier coatings（TBCs） by adding an additional step of surface modification,namely,supersonic fine particles bombarding（SFPB） process,on bond coat before applying the topcoat.After isothermal oxidation at 1000 °C for different time,the surface state of the bond coat and its phase transformation were investigated using X-ray diffraction（XRD）,scanning electron microscopy（SEM） equipped with energy-dispersive X-ray spectrometry（EDS）,transmission electron microscopy（TEM） and Cr3＋ luminescence spectroscopy.The dislocation density significantly increases after SFPB process,which can generate a large number of diffusion channels in the area of the surface of the bond coat.At the initial stage of isothermal oxidation,the diffusion velocity of Al in the bond coat significantly increases,leading to the formation of a layer of stable α-Al2O3 phase.A great number of Cr3＋ positive ions can diffuse via diffusion channels during the transient state of isothermal oxidation,which can lead to the presence of（Al0.9Cr0.1）2O3 phase and accelerate the γ→θ→α phase transformation.Cr3＋ luminescence spectroscopy measurement shows that the residual stress increases at the initial stage of isothermal oxidation and then decreases.The residual stress after isothermal oxidation for 310 h reduces to 0.63 GPa compared with 0.93 GPa after isothermal oxidation for 26 h.In order to prolong the lifespan of TBCs,a layer of continuous,dense and pure α-Al2O3 with high oxidation resistance at the interface between topcoat and bond coat can be obtained due to additional SFPB process.展开更多
Particulate pollution is a global risk factor that seriously threatens human health.Fine particles(FPs)and ultrafine particles(UFPs)have small particle diameters and large specific surface areas,which can easily adsor...Particulate pollution is a global risk factor that seriously threatens human health.Fine particles(FPs)and ultrafine particles(UFPs)have small particle diameters and large specific surface areas,which can easily adsorb metals,microorganisms and other pollutants.FPs and UFPs can enter the human body in multiple ways and can be easily and quickly absorbed by the cells,tissues and organs.In the body,the particles can induce oxidative stress,inflammatory response and apoptosis,furthermore causing great adverse effects.Epidemiological studies mainly take the population as the research object to study the distribution of diseases and health conditions in a specific population and to focus on the identification of influencing factors.However,the mechanism by which a substance harms the health of organisms is mainly demonstrated through toxicological studies.Combining epidemiological studies with toxicological studies will provide a more systematic and comprehensive understanding of the impact of PM on the health of organisms.In this review,the sources,compositions,and morphologies of FPs and UFPs are briefly introduced in the first part.The effects and action mechanisms of exposure to FPs and UFPs on the heart,lungs,brain,liver,spleen,kidneys,pancreas,gastrointestinal tract,joints and reproductive system are systematically summarized.In addition,challenges are further pointed out at the end of the paper.This work provides useful theoretical guidance and a strong experimental foundation for investigating and preventing the adverse effects of FPs and UFPs on human health.展开更多
During November–December 2010 aerosol scattering coefficients were monitored using a single-waved （525 nm） Nephelometer at a regional monitoring station in the central Pearl River Delta region and 24-hr fine partic...During November–December 2010 aerosol scattering coefficients were monitored using a single-waved （525 nm） Nephelometer at a regional monitoring station in the central Pearl River Delta region and 24-hr fine particle （PM 2.5） samples were also collected during the period using quartz filters for the analysis of major chemical components including organic carbon （OC）,elemental carbon （EC）,sulfate,nitrate and ammonium.In average,these five components accounted for about 85% of PM 2.5 mass and contributed 42% （OC）,19% （SO 4 2 -）,12% （NO 3 -）,8.4% （NH 4＋） and 3.7% （EC）,to PM 2.5 mass.A relatively higher mass scattering efficiency of 5.3 m 2/g was obtained for fine particles based on the linear regression between scattering coefficients and PM 2.5 mass concentrations.Chemical extinction budget based on IMPROVE approach revealed that ammonium sulfate,particulate organic matter,ammonium nitrate and EC in average contributed about 32%,28%,20% and 6% to the light extinction coefficients,respectively.展开更多
Number concentration and distribution of airborne particles in the size range 5.6 to 560 nm diameter were measured in Beijing for a 15-d period in winter 2005. Dally average number concentrations of nucleation mode （...Number concentration and distribution of airborne particles in the size range 5.6 to 560 nm diameter were measured in Beijing for a 15-d period in winter 2005. Dally average number concentrations of nucleation mode （5.6-20 um）, Aitken mode （20-100 um）, and accumulation mode （100-560 um） particles, and total particles were 17500, 32000, 4000, and 53500 cm^-3, respectively. Average particle size distribution was monomodal with a mode diameter of about 40 um at night and bimodal with mode diameters of about 10 and about 40 um during the daytime. New particle formation events, which were connected to diurnal variation of nucleation mode particles, were observed in more than half of the observation days. The events often started around 10：00-11：00 Chinese Standard Time （CST） and ended up after 3-4 h. Concentrations of Aitken and accumulation mode particles increased from midnight and reached their maxima at about 10：00 CST, and then decreased and became the lowest in the afternoon. Analysis of diurnal cycles in traffic volume and meteorological parameters revealed that the accumulation of the particles in Aitken and accumulation modes in the morning was influenced by formation of an inversion and increase in vehicle emission, and dispersion of such particles in the afternoon was associated with more effective vertical mixing and higher wind speed.展开更多
The recent year's monitor results of Beijing indicated that the pollution level of fine particles PM 2.5 showed an increasing trend. To understand pollution characteristics of PM 2.5 and its relationship...The recent year's monitor results of Beijing indicated that the pollution level of fine particles PM 2.5 showed an increasing trend. To understand pollution characteristics of PM 2.5 and its relationship with the meteorological conditions in Beijing, a one-year monitoring of PM 2.5 mass concentration and correspondent meteorological parameters was performed in Beijing in 2001. The PM 2.5 levels in Beijing were very high, the annual average PM 2.5 concentration in 2001 was 7 times of the National Ambient Air Quality Standards proposed by US EPA. The major chemical compositions were organics, sulfate, crustals and nitrate. It was found that the mass concentrations of PM 2.5 were influenced by meteorological conditions. The correlation between the mass concentrations of PM 2.5 and the relative humidity was found. And the correlation became closer at higher relative humidity. And the mass concentrations of PM 2.5 were negtive-correlated to wind speeds, but the correlation between the mass concentration of PM 2.5 and wind speed was not good at stronger wind.展开更多
Objective To compare PM2.5 pollation level between the city of coal-fuel pollution (Taiyuan) and the city of pollution mixed with coal fuels and vehicle exhausts (Beijing), to analyze the concentration of B[a]p and...Objective To compare PM2.5 pollation level between the city of coal-fuel pollution (Taiyuan) and the city of pollution mixed with coal fuels and vehicle exhausts (Beijing), to analyze the concentration of B[a]p and Pb in the pollutants, and to study the DNA damage by PM2.5. Methods Air fine particles (PM2.5) were collected in Beijing and Taiyuan by means of the filter membrane method, the concentration of B[a]p and Pb were analyzed by high performance liquid chromatography and atomic absorption spectroscopy respectveily, and the damage of DNA by PM2.5 was detected by single cell gel-electrophoresis (SCGE) using the human lung epithelial cells (A549) as target cells. Results The concentration of PM2.5 in the winter of Beijing was 0.028-0.436 mg/m3, and that in Taiyuan was 0.132-0.681 mg/m3. The concentration of B[a]p was 0.104 and 0.156 礸/mg on PM2.5 of Beijing and Taiyuan, respectively, whereas the concentration of Pb was 1.094 and 1.137 礸/mg on PM2.5 of Beijing and Taiyuan, respectively. Exposure to PM2.5 at the concentrations of 5, 50, and 200 礸/mL for 12 h and 24 h caused DNA damage of the human alveolar epithelium, and the ratios of the tailing and length of the tail were all significantly different from those of the negative control group (P<0.05), and indicated a dose-response relationship. Conclusion PM2.5 has certain genetic toxicity.展开更多
The nondestructive characterization of the mixing state of individual fine particles using the traditional single particle analysis technique remains a challenge.In this study,fine particles were collected during haze...The nondestructive characterization of the mixing state of individual fine particles using the traditional single particle analysis technique remains a challenge.In this study,fine particles were collected during haze events under different pollution levels from September 5 to 112017 in Beijing,China.A nondestructive surface-enhanced Raman scattering(SERS)technique was employed to investigate the morphology,chemical composition,and mixing state of the multiple components in the individual fine particles.Optical image and SERS spectral analysis results show that soot existing in the form of opaque material was predominant during clear periods(PM_(2.5)≤75μg/m^(3)).During polluted periods(PM_(2.5)>75μg/m^(3)),opaque particles mixed with transparent particles(nitrates and sulfates)were generally observed.Direct classical least squares analysis further identified the relative abundances of the three major components of the single particles:soot(69.18%),nitrates(28.71%),and sulfates(2.11%).A negative correlation was observed between the abundance of soot and the mass concentration of PM_(2.5).Furthermore,mapping analysis revealed that on hazy days,PM_(2.5)existed as a core-shell structure with soot surrounded by nitrates and sulfates.This mixing state analysis method for individual PM_(2.5)particles provides information regarding chemical composition and haze formation mechanisms,and has the potential to facilitate the formulation of haze prevention and control policies.展开更多
The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated,and the crystallization characteristics varying with the operation parameter...The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated,and the crystallization characteristics varying with the operation parameters and compositions of the desulfurization slurry were discussed.The results showed that the fine particles generated during the desulfurization process were closely related to the crystal characteristics in the desulfurization slurry by comparison of their morphology and elements. With the higher proportion of fine crystals in the desulfurization slurry,the number concentration of fine particles after desulfurization was increased and their particle sizes were smaller,indicating that the optimization of gypsum crystallization was beneficial for the reduction of the fine particle emission. The lower p H value and an optimal temperature of the desulfurization slurry were beneficial to restrain the generation of fine crystals in the desulfurization slurry. In addition,the higher concentrations of the Fe3＋ions and the F- ions in the desulfurization slurry both promoted the generation of fine crystals with corresponding change of the morphology and the effect of the Fe3＋ ions was more obvious.With the application of the desulfurization synergist additive,it was beneficial for the inhibition of fine crystals while the thinner crystals were generated.展开更多
Organic acids as important constituents of organic aerosols not only influence the aerosols＇ hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported o...Organic acids as important constituents of organic aerosols not only influence the aerosols＇ hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14-C32 fatty acids, C4-C9 dicarboxylic acids and aromatic acids in PM2.5 collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14-C32 fatty acids, aromatic acids and C4- C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20-C32 fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while Cl4-C18 fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4-C9 dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14-C32 fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14-C18 fatty acids were attributed to anthropogenic sources, about 50%-85% of the C20-C32 fatty acids were attributed to natural sources, 80%-95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.展开更多
Ferronickel enrichment and extraction from nickel laterite ore were studied through reduction and magnetic separation. Reduction experiments were performed using hydrogen and carbon monoxide as reductants at different...Ferronickel enrichment and extraction from nickel laterite ore were studied through reduction and magnetic separation. Reduction experiments were performed using hydrogen and carbon monoxide as reductants at different temperatures （700-1000℃）. Magnetic separa- tion of the reduced products was conducted using a SLon-100 cycle pulsating magnetic separator （1.2 T）. Composition analysis indicates that the nickel laterite ore contains a total iron content of 22.50wt% and a total nickel content of 1.91wt%. Its mineral composition mainly con- sists of serpentine, hortonolite, and goethite. During the reduction process, the grade of nickel and iron in the products increases with in- creasing reduction temperature. Although a higher temperature is more favorable for reduction, the temperature exceeding 1000℃ results in sintering of the products, preventing magnetic separation. After magnetic separation, the maximum total nickel and iron concentrations are 5.43wt% and 56.86wt%, and the corresponding recovery rates are 84.38% and 53.76%, respectively.展开更多
CaxBa1-xTiO3 （CBT） fine particles doped with red luminescence center of Pr3＋ ions （Pr： CBT） were successfully synthesized by salt assisted spray pyrolysis （SASP） process. Scanning electronic microscope （SEM）...CaxBa1-xTiO3 （CBT） fine particles doped with red luminescence center of Pr3＋ ions （Pr： CBT） were successfully synthesized by salt assisted spray pyrolysis （SASP） process. Scanning electronic microscope （SEM） and laser scattering analysis demonstrate that salt can be removed from the surface of particles by washing with Milli-Q water and the particles can be further separated by ball-milling to get well-dispersed Pr^3＋ ions doped CBT fine particles. The luminescence properties, such as photoluminescence （PL） and mechanoluminescence （ML）, of as-synthesized Pr： CBT particles were investigated. For Pr： CBT fine particles with different Ca molar ratios, all the samples show one emission at 612 nm, with increasing Ca molar ratio, PL intensity of Pr： CBT fine particles become stronger and stronger. When pressure was loaded on the Pr： CBT pellet, mechanoluminescence（ML） emission was measured. The results show that the ML intensity is proportional to the applied pressure.展开更多
Thermally Grown Oxide（TGO） is a dominating component in controlling the effectiveness of thermal barrier coating.During the growth of TGO,whether we could homogeneously distribute Al atom on the TGO and the intermed...Thermally Grown Oxide（TGO） is a dominating component in controlling the effectiveness of thermal barrier coating.During the growth of TGO,whether we could homogeneously distribute Al atom on the TGO and the intermediate metal layer will be the key factor in forming TGO with continuous,uniform and single-ingredient（Al2O3）.In this experiment,we bombarded particles on to the metallic bound layer.We studied the influence of supersonic particle bombardment on the diffusion of Al.We hope to control the growth of TGO by monitoring the diffusion of Al.Thermal barrier coating（TBC）,which consists of a NiCoCrAlY bond coat and a ZrO2-8Y2O3（wt.%） topcoat（TC）,is fabricated on the nickel-base superalloy by air plasma spray（APS）.NiCoCrAlY bond coat is treated by supersonic fine particles bombarding（SFPB）.The morphology,oxidation behavior of TBC and phase are characterized by scanning electron microscope（SEM） equipped with an energy dispersive spectromrter（EDS） and X-ray diffractometer（XRD）.The influence of supersonic fine particles bombarding technique on the service life of thermal barrier coating is studied.The results show that SFPB technique improves the flaw of excessive surface undulation in the as-sprayed bond coat.A continuous,uniform and single-ingredient（Al2O3） TGO can quickly form in the SFPB TBC during high temperature oxidation process.The thickening of TGO is relatively slow.These will effectively suppress the formation of other non-protective oxides.Therefore,SFPB technique reduces the growth stress level generated by the continuous growth of TGO,and also avoids the stress concentration induced by formation of the large particle spinal oxide.Thermal barrier coating still remains well after 350 thermal cycles.The service life of TBC is improved.The proposed research provides theoretical basis and technical references to further improve and enhance the SFPB technique.展开更多
Thermal barrier coating ( TBC) consisting of a NiCoCrAlY bond coat ( BC) and a ZrO2-8 wt. % Y2O3 topcoat ( TC) was fabricated on the nickel-base superalloy by air plasma spray ( APS) . The BC was treated by supersonic...Thermal barrier coating ( TBC) consisting of a NiCoCrAlY bond coat ( BC) and a ZrO2-8 wt. % Y2O3 topcoat ( TC) was fabricated on the nickel-base superalloy by air plasma spray ( APS) . The BC was treated by supersonic fine particle bombarding ( SFPB) . Thermal cyclic failure and residual stress in thermally grown oxide ( TGO) scale were studied by SEM with EDS and ruby fluorescence spectroscopy ( RFS) . As shown in the results,after treated by SFPB,thickening of TGO was relatively slow,which reduced the level of growth stress. The TBC with SFPB treatment was still remained well undergoing 350 times of thermal cycle. However,after thermal cycle with the same times,the separation of TC was observed in TBC without SFPB treatment. The residual stress analysis by RFS showed that the residual stress of SFPB-treated TBC increased with the increasing number of thermal cycle. The residual stress of conventional TBC reached a value of 650 MPa at 350 times of cycle and that of SFPB-treated TBC only reached 532 MPa at 400 times of cycle. The BC with SFPB treatment after 400 times of cycle was analyzed by RFS,the high stress value was not observed in local thickened region of TGO. Thermal cycling resistance of TBC can be improved by the SFPB technology.展开更多
[Objective] The aim was to study the concentration characteristics and sources of chemical elements in atmospheric fine particles (PM2.5) in autumn in Xi’an City. [Method] By means of mini-volume sampler, PM2.5 sampl...[Objective] The aim was to study the concentration characteristics and sources of chemical elements in atmospheric fine particles (PM2.5) in autumn in Xi’an City. [Method] By means of mini-volume sampler, PM2.5 samples in atmosphere in Xi’an were collected in October 2009, and the concentration characteristics and sources of elements in PM2.5 were analyzed. [Result] The average mass concentration of PM2.5 in atmosphere in autumn in Xi’an City was 168.44 μg/m3 which was higher than that of Beijing and Pearl River Delta area, and the minimum and maximum value were 53.29 and 358.16 μg/m3, respectively. The mass concentration of S, Zn, K, Cl, Ca and Fe in PM2.5 was above 1.0 μg/m3, being at high pollution level. In addition, K had obvious correlation with organic carbon (OC) and element carbon (EC), with the correlation coefficients of 0.76 and 0.75 (P<0.000 1), respectively, and it showed that OC and EC had the same source as K, namely biomass burning had certain contribution to OC and EC. Enrichment factors analysis revealed that K, Ca, Fe, Ti, Mn and Cr mainly came from earth crust, rock weathering and other natural sources, while anthropogenic pollution sources had great effects on S, Zn, Cl, Pb, Br, Mo, Cd and As which were affected by soil dust and other natural sources slightly, and Cd had the highest enrichment factor and mainly came from metal smelting. In a word, coal combustion, biomass burning, vehicle emissions, metallurgical, chemical industry and dust were the main sources of PM2.5 in autumn in Xi’an. [Conclusion] The study could provide theoretical foundation for the control of urban environmental pollution.展开更多
The pollution characteristics of surfactant substances in fine particles(PM_(2.5))in spring were studied in the Beibu Gulf Region of China,68 samples of PM_(2.5)were collected at Weizhou Island in Beihai City from Mar...The pollution characteristics of surfactant substances in fine particles(PM_(2.5))in spring were studied in the Beibu Gulf Region of China,68 samples of PM_(2.5)were collected at Weizhou Island in Beihai City from March 12 to April 17,2015.The Anionic Surfactant Substances(ASS)and Cationic Surfactant Substances(CSS)in the samples were analyzed using Byethyl Violet Spectrophotometry and Disulfide Blue Spectrophotometry,respectively.Combined with the data from backward trajectory simulation,the effects of air pollutants from remote transport on the pollution characteristics of surfactant substances in PM_(2.5)in the Beibu Gulf Region were analyzed and discussed.The results showed that the daily mean concentrations of ASS and CSS in spring in the Beibu Gulf Region were 165.20 pmol/m^(3)and 8.05 pmol/m^(3),and the variation ranges were 23.21–452.55 pmol/m^(3)and 0.65–31.31 pmol/m^(3),accounting for 1.82‰±1.65‰and 0.12‰±0.11‰of the mass concentration of PM_(2.5),respectively.These concentrations were lower than those in comparable regions around the world.There was no clear correlation between the concentrations of ASS and CSS in PM_(2.5)and the mass concentrations of PM_(2.5).Tourism and air transport had a positive contribution on the concentrations of ASS.The concentration of surfactant substances in PM_(2.5)was significantly impacted by wind speed and wind direction.Atmospheric temperature,air pressure and precipitation had little effect on the concentrations of surfactant substances.Surfactant substances in PM_(2.5)significantly impacted visibility.Results also showed that the main sources of surfactant substances were from the southern China and Southeast Asia.展开更多
Over the past few decades,the metal elements(MEs)in atmospheric particles have aroused great attention.Some well-established techniques have been used to measure particlebound MEs.However,each method has its own advan...Over the past few decades,the metal elements(MEs)in atmospheric particles have aroused great attention.Some well-established techniques have been used to measure particlebound MEs.However,each method has its own advantages and disadvantages in terms of complexity,accuracy,and specific elements of interest.In this study,the performances of inductively coupled plasma-optical emission spectrometry(ICP-OES)and total reflection X-ray fluorescence spectroscopy(TXRF)were evaluated for quality control to analyze data accuracy and precision.The statistic methods(Deming regression and significance testing)were applied for intercomparison between ICP-OES and TXRF measurements for same lowloading PM_(2.5)samples in Weizhou Island.The results from the replicate analysis of standard filters(SRM 2783)and field filters samples indicated that 10 MEs(K,Ca,V,Cr,Mn,Fe,Ni,Cu,Zn,and Pb)showed good accuracies and precision for both techniques.The higher accuracy tended to the higher precision in the MEs analysis process.In addition,the interlab comparisons illustrated that V and Mn all had good agreements between ICP-OES and TXRF.The measurements of K,Cu and Zn were more reliable by TXRF analysis for low-loading PM_(2.5).ICP-OES was more accurate for the determinations for Ca,Cr,Ni and Pb,owing to the overlapping spectral lines and low sensitivity during TXRF analysis.The measurements of Fe,influenced by low-loading PM_(2.5),were not able to determine which instrument could obtain more reliable results.These conclusions could provide reference information to choose suitable instrument for the determination of MEs in low-loading PM_(2.5)samples.展开更多
To address the shortcomings of existing particulate matter trapping technology,especially the low separation efficiency of fine particles,herein,a novel gas cyclone-liquid jet separator was developed to research fine ...To address the shortcomings of existing particulate matter trapping technology,especially the low separation efficiency of fine particles,herein,a novel gas cyclone-liquid jet separator was developed to research fine particle trapping.First,numerical simulation methods were used to investigate the flow field characteristics and dust removal efficiency of the separator under different working conditions,and to determined suitable experimental conditions for subsequent dust removal experiments.Afterward,the separation efficiency of the separator against five kinds of common particles,including g-C_(3)N_(4),TiO_(2),SiC,talc,and SiO_(2),was experimentally studied.A maximum separation efficiency of 99.48%was achieved for particles larger than 13.1μm,and 96.55%efficiency was achieved for particles larger than 2μm.The best crushing atomization effect was achieved for the separator when uGwas 10 m·s^(-1)and uLwas 3 m·s^(-1),while the best separation effect was achieved when uGwas 10 m·s^(-1)and uLwas 3.75 m·s^(-1).Studies have shown that the gas cyclone-liquid jet separator has excellent applicability in the separation of fine particles.展开更多
A technique for preparing perovskite type oxides was developed. By this technique, ultra fine particles of La 0.9 RE 0.1 MnO 3 (RE: Y, Ce, Pr, Sm, Gd,or Dy) with high surface area and single perovskite stru...A technique for preparing perovskite type oxides was developed. By this technique, ultra fine particles of La 0.9 RE 0.1 MnO 3 (RE: Y, Ce, Pr, Sm, Gd,or Dy) with high surface area and single perovskite structure were prepared, and the series of La 0.9 RE 0.1 MnO 3 catalysts were studied experimentally. The so prepared ultra fine particles exhibites high catalytic activity for CH 4 total oxidation. The ultra fine particles of La 0.9 RE 0.1 MnO 3 (except for La 0.9 Pr 0.1 MnO 3) prepared by this method are thermally much more stable than LaMnO 3. Of the La 0.9 RE 0.1 MnO 3 series, La 0.9 Y 0.1 MnO 3 is most thermally stable, and La 0.9 Y 0.1 MnO 3 or La 0.9 Gd 0.1 MnO 3 (varies with calcination temperature) exhibits the highest catalytic activity for total oxidation of methane. The specific surface area of La 0.9 Y 0.1 MnO 3 calcined at 1000 ℃ reaches 14.9 m 2·g -1 , while the specific surface area of LaMnO 3 calcined at the same temperature is only 1.8 m 2·g -1 .展开更多
Ultrafine particles represent a growing concern in the public health community but their precise role in many illnesses is still unknown. This lack of knowledge is related to the experimental difficulty in linking the...Ultrafine particles represent a growing concern in the public health community but their precise role in many illnesses is still unknown. This lack of knowledge is related to the experimental difficulty in linking their biological effects to their multiple properties, which are important determinants of toxicity. Our aim is to propose an interdisciplinary approach to study fine(FP) and ultrafine(UFP) particles, generated in a controlled manner using a mini CAST(Combustion Aerosol Standard) soot generator used with two different operating conditions(CAST1 and CAST3). The chemical characterization was performed by an untargeted analysis using ultra-high resolution mass spectrometry. In conjunction with this approach, subsequent analysis by gas chromatography–mass spectrometry(GC–MS) was performed to identify polycyclic aromatic hydrocarbons(PAH). CAST1 enabled the generation of FP with a predominance of small PAH molecules, and CAST3 enabled the generation of UFP, which presented higher numbers of carbon atoms corresponding to larger PAH molecules. Healthy normal human bronchial epithelial(NHBE) cells differentiated at the air-liquid interface(ALI) were directly exposed to these freshly emitted FP and UFP. Expression of MUC5AC, FOXJ1, OCLN and ZOI as well as microscopic observation confirmed the ciliated pseudostratified epithelial phenotype. Study of the mass deposition efficiency revealed a difference between the two operating conditions, probably due to the morphological differences between the two categories of particles. We demonstrated that only NHBE cells exposed to CAST3 particles induced upregulation in the gene expression of IL-8 and NQO1. This approach offers new perspectives to study FP and UFP with stable and controlled properties.展开更多
基金supported by the National key Research and Development Program of China(No.2022YFB3705200)the National Natural Science Foundation of China(Nos.U1804146,51905153,52111530068)+1 种基金the Science and Technology Innovation Team Project of Henan University of Science and Technology,China(No.2015XTD006)the Major Science and Technology Project of Henan Province,China(No.221100230200)。
文摘The effects of gradient nanostructures induced by supersonic fine particle bombardment(SFPB)on the surface integrity,microstructural evolution,and mechanical properties of a Ni-W-Co-Ta medium-heavy alloy(MHA)were systematically investigated.The results show that gradient nanostructures are formed on the surface of Ni-W-Co-Ta MHA after SFPB treatment.At a gas pressure of 1.0 MPa and an impact time of 60 s,the ultimate tensile strength and yield strength of the alloy reached the maximum values of 1236 MPa and 758 MPa,respectively,which are 22.5%and 38.8%higher than those of the solid solution treated alloy,and the elongation(46.3%)is close to that of the solid solution treated alloy,achieving the optimal strength–ductility synergy.However,microcracks appear on the surface with excessive gas pressure and impact time,generating the relaxed residual stress and decreased strength.With the increase of the impact time and gas pressure,the depth of the deformation layer and the surface microhardness gradually increase,reaching the maximum values(29μm and HV 451)at 1.0 MPa and 120 s.The surface grain size is refined to a minimum of 11.67 nm.Notably,SFPB treatment has no obvious effect on elongation,and the fracture mode changes from the ductile fracture before treatment to ductile–brittle mixed fracture after treatment.
基金Foundation item: Project (50575220) supported by the National Natural Science Foundation of ChinaProject supported by State Key Laboratory of Engines,China
文摘This work was attempted to modify the current technology for thermal barrier coatings（TBCs） by adding an additional step of surface modification,namely,supersonic fine particles bombarding（SFPB） process,on bond coat before applying the topcoat.After isothermal oxidation at 1000 °C for different time,the surface state of the bond coat and its phase transformation were investigated using X-ray diffraction（XRD）,scanning electron microscopy（SEM） equipped with energy-dispersive X-ray spectrometry（EDS）,transmission electron microscopy（TEM） and Cr3＋ luminescence spectroscopy.The dislocation density significantly increases after SFPB process,which can generate a large number of diffusion channels in the area of the surface of the bond coat.At the initial stage of isothermal oxidation,the diffusion velocity of Al in the bond coat significantly increases,leading to the formation of a layer of stable α-Al2O3 phase.A great number of Cr3＋ positive ions can diffuse via diffusion channels during the transient state of isothermal oxidation,which can lead to the presence of（Al0.9Cr0.1）2O3 phase and accelerate the γ→θ→α phase transformation.Cr3＋ luminescence spectroscopy measurement shows that the residual stress increases at the initial stage of isothermal oxidation and then decreases.The residual stress after isothermal oxidation for 310 h reduces to 0.63 GPa compared with 0.93 GPa after isothermal oxidation for 26 h.In order to prolong the lifespan of TBCs,a layer of continuous,dense and pure α-Al2O3 with high oxidation resistance at the interface between topcoat and bond coat can be obtained due to additional SFPB process.
基金financial support received from the National Natural Science Foundation of China (No.82173486)the Natural Sciences Foundation of Tianjin City of China (No.12JCYBJC19100)+1 种基金the Scientific Research Program of Tianjin Education Commission (No.2019KJ167)The Program of Tianjin Key Laboratory of Oral and Maxillofacial Function Reconstruction (No.2021KLMS10)。
文摘Particulate pollution is a global risk factor that seriously threatens human health.Fine particles(FPs)and ultrafine particles(UFPs)have small particle diameters and large specific surface areas,which can easily adsorb metals,microorganisms and other pollutants.FPs and UFPs can enter the human body in multiple ways and can be easily and quickly absorbed by the cells,tissues and organs.In the body,the particles can induce oxidative stress,inflammatory response and apoptosis,furthermore causing great adverse effects.Epidemiological studies mainly take the population as the research object to study the distribution of diseases and health conditions in a specific population and to focus on the identification of influencing factors.However,the mechanism by which a substance harms the health of organisms is mainly demonstrated through toxicological studies.Combining epidemiological studies with toxicological studies will provide a more systematic and comprehensive understanding of the impact of PM on the health of organisms.In this review,the sources,compositions,and morphologies of FPs and UFPs are briefly introduced in the first part.The effects and action mechanisms of exposure to FPs and UFPs on the heart,lungs,brain,liver,spleen,kidneys,pancreas,gastrointestinal tract,joints and reproductive system are systematically summarized.In addition,challenges are further pointed out at the end of the paper.This work provides useful theoretical guidance and a strong experimental foundation for investigating and preventing the adverse effects of FPs and UFPs on human health.
基金supported by the National Natural Science Foundation of China (No. 40821003,41025012)NSFC-Guangdong Joint Funds (No. U0833003)+1 种基金the Natural Science Foundation of Guangdong (No. 7118013)the Bureau of Science,Technology and Information of Guangzhou (No. 2010U1-E00601-2)
文摘During November–December 2010 aerosol scattering coefficients were monitored using a single-waved （525 nm） Nephelometer at a regional monitoring station in the central Pearl River Delta region and 24-hr fine particle （PM 2.5） samples were also collected during the period using quartz filters for the analysis of major chemical components including organic carbon （OC）,elemental carbon （EC）,sulfate,nitrate and ammonium.In average,these five components accounted for about 85% of PM 2.5 mass and contributed 42% （OC）,19% （SO 4 2 -）,12% （NO 3 -）,8.4% （NH 4＋） and 3.7% （EC）,to PM 2.5 mass.A relatively higher mass scattering efficiency of 5.3 m 2/g was obtained for fine particles based on the linear regression between scattering coefficients and PM 2.5 mass concentrations.Chemical extinction budget based on IMPROVE approach revealed that ammonium sulfate,particulate organic matter,ammonium nitrate and EC in average contributed about 32%,28%,20% and 6% to the light extinction coefficients,respectively.
基金Project supported by the National Natural Science Foundation of China(No.20477020)the National Science Fund for Distinguished Young Scholars(No.20625722).
文摘Number concentration and distribution of airborne particles in the size range 5.6 to 560 nm diameter were measured in Beijing for a 15-d period in winter 2005. Dally average number concentrations of nucleation mode （5.6-20 um）, Aitken mode （20-100 um）, and accumulation mode （100-560 um） particles, and total particles were 17500, 32000, 4000, and 53500 cm^-3, respectively. Average particle size distribution was monomodal with a mode diameter of about 40 um at night and bimodal with mode diameters of about 10 and about 40 um during the daytime. New particle formation events, which were connected to diurnal variation of nucleation mode particles, were observed in more than half of the observation days. The events often started around 10：00-11：00 Chinese Standard Time （CST） and ended up after 3-4 h. Concentrations of Aitken and accumulation mode particles increased from midnight and reached their maxima at about 10：00 CST, and then decreased and became the lowest in the afternoon. Analysis of diurnal cycles in traffic volume and meteorological parameters revealed that the accumulation of the particles in Aitken and accumulation modes in the morning was influenced by formation of an inversion and increase in vehicle emission, and dispersion of such particles in the afternoon was associated with more effective vertical mixing and higher wind speed.
文摘The recent year's monitor results of Beijing indicated that the pollution level of fine particles PM 2.5 showed an increasing trend. To understand pollution characteristics of PM 2.5 and its relationship with the meteorological conditions in Beijing, a one-year monitoring of PM 2.5 mass concentration and correspondent meteorological parameters was performed in Beijing in 2001. The PM 2.5 levels in Beijing were very high, the annual average PM 2.5 concentration in 2001 was 7 times of the National Ambient Air Quality Standards proposed by US EPA. The major chemical compositions were organics, sulfate, crustals and nitrate. It was found that the mass concentrations of PM 2.5 were influenced by meteorological conditions. The correlation between the mass concentrations of PM 2.5 and the relative humidity was found. And the correlation became closer at higher relative humidity. And the mass concentrations of PM 2.5 were negtive-correlated to wind speeds, but the correlation between the mass concentration of PM 2.5 and wind speed was not good at stronger wind.
基金This work was supported by National Natural Science Foundation of China (project No. 20077033).
文摘Objective To compare PM2.5 pollation level between the city of coal-fuel pollution (Taiyuan) and the city of pollution mixed with coal fuels and vehicle exhausts (Beijing), to analyze the concentration of B[a]p and Pb in the pollutants, and to study the DNA damage by PM2.5. Methods Air fine particles (PM2.5) were collected in Beijing and Taiyuan by means of the filter membrane method, the concentration of B[a]p and Pb were analyzed by high performance liquid chromatography and atomic absorption spectroscopy respectveily, and the damage of DNA by PM2.5 was detected by single cell gel-electrophoresis (SCGE) using the human lung epithelial cells (A549) as target cells. Results The concentration of PM2.5 in the winter of Beijing was 0.028-0.436 mg/m3, and that in Taiyuan was 0.132-0.681 mg/m3. The concentration of B[a]p was 0.104 and 0.156 礸/mg on PM2.5 of Beijing and Taiyuan, respectively, whereas the concentration of Pb was 1.094 and 1.137 礸/mg on PM2.5 of Beijing and Taiyuan, respectively. Exposure to PM2.5 at the concentrations of 5, 50, and 200 礸/mL for 12 h and 24 h caused DNA damage of the human alveolar epithelium, and the ratios of the tailing and length of the tail were all significantly different from those of the negative control group (P<0.05), and indicated a dose-response relationship. Conclusion PM2.5 has certain genetic toxicity.
基金supported by the National Natural Science Foundation of China(Nos.21707077,21775042)the National Key Research and Development Program of China(No.2017YFA0207003)the Fundamental Research Funds for the Central Universities(No.2020 MS037)。
文摘The nondestructive characterization of the mixing state of individual fine particles using the traditional single particle analysis technique remains a challenge.In this study,fine particles were collected during haze events under different pollution levels from September 5 to 112017 in Beijing,China.A nondestructive surface-enhanced Raman scattering(SERS)technique was employed to investigate the morphology,chemical composition,and mixing state of the multiple components in the individual fine particles.Optical image and SERS spectral analysis results show that soot existing in the form of opaque material was predominant during clear periods(PM_(2.5)≤75μg/m^(3)).During polluted periods(PM_(2.5)>75μg/m^(3)),opaque particles mixed with transparent particles(nitrates and sulfates)were generally observed.Direct classical least squares analysis further identified the relative abundances of the three major components of the single particles:soot(69.18%),nitrates(28.71%),and sulfates(2.11%).A negative correlation was observed between the abundance of soot and the mass concentration of PM_(2.5).Furthermore,mapping analysis revealed that on hazy days,PM_(2.5)existed as a core-shell structure with soot surrounded by nitrates and sulfates.This mixing state analysis method for individual PM_(2.5)particles provides information regarding chemical composition and haze formation mechanisms,and has the potential to facilitate the formulation of haze prevention and control policies.
基金supported by the National Natural Science Foundation of China(No.21276049)the National Basic Research Program of China(973 Program)(No.2013CB228505)the Science and Technology Support Program of Jiangsu(No.BE2014856) for their financial support
文摘The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated,and the crystallization characteristics varying with the operation parameters and compositions of the desulfurization slurry were discussed.The results showed that the fine particles generated during the desulfurization process were closely related to the crystal characteristics in the desulfurization slurry by comparison of their morphology and elements. With the higher proportion of fine crystals in the desulfurization slurry,the number concentration of fine particles after desulfurization was increased and their particle sizes were smaller,indicating that the optimization of gypsum crystallization was beneficial for the reduction of the fine particle emission. The lower p H value and an optimal temperature of the desulfurization slurry were beneficial to restrain the generation of fine crystals in the desulfurization slurry. In addition,the higher concentrations of the Fe3＋ions and the F- ions in the desulfurization slurry both promoted the generation of fine crystals with corresponding change of the morphology and the effect of the Fe3＋ ions was more obvious.With the application of the desulfurization synergist additive,it was beneficial for the inhibition of fine crystals while the thinner crystals were generated.
基金supported by the National Natural Science Foundation of China(No.41025012,40673074)NSFC-Guangdong Joint Natural Science Foundation(No.U0833003)
文摘Organic acids as important constituents of organic aerosols not only influence the aerosols＇ hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14-C32 fatty acids, C4-C9 dicarboxylic acids and aromatic acids in PM2.5 collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14-C32 fatty acids, aromatic acids and C4- C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20-C32 fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while Cl4-C18 fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4-C9 dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14-C32 fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14-C18 fatty acids were attributed to anthropogenic sources, about 50%-85% of the C20-C32 fatty acids were attributed to natural sources, 80%-95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.
文摘Ferronickel enrichment and extraction from nickel laterite ore were studied through reduction and magnetic separation. Reduction experiments were performed using hydrogen and carbon monoxide as reductants at different temperatures （700-1000℃）. Magnetic separa- tion of the reduced products was conducted using a SLon-100 cycle pulsating magnetic separator （1.2 T）. Composition analysis indicates that the nickel laterite ore contains a total iron content of 22.50wt% and a total nickel content of 1.91wt%. Its mineral composition mainly con- sists of serpentine, hortonolite, and goethite. During the reduction process, the grade of nickel and iron in the products increases with in- creasing reduction temperature. Although a higher temperature is more favorable for reduction, the temperature exceeding 1000℃ results in sintering of the products, preventing magnetic separation. After magnetic separation, the maximum total nickel and iron concentrations are 5.43wt% and 56.86wt%, and the corresponding recovery rates are 84.38% and 53.76%, respectively.
基金Funded partly by the Industrial Technology Research Grant Programin ’03 from New Energy and Industrial Technology Development Organization(NEDO) of Japan
文摘CaxBa1-xTiO3 （CBT） fine particles doped with red luminescence center of Pr3＋ ions （Pr： CBT） were successfully synthesized by salt assisted spray pyrolysis （SASP） process. Scanning electronic microscope （SEM） and laser scattering analysis demonstrate that salt can be removed from the surface of particles by washing with Milli-Q water and the particles can be further separated by ball-milling to get well-dispersed Pr^3＋ ions doped CBT fine particles. The luminescence properties, such as photoluminescence （PL） and mechanoluminescence （ML）, of as-synthesized Pr： CBT particles were investigated. For Pr： CBT fine particles with different Ca molar ratios, all the samples show one emission at 612 nm, with increasing Ca molar ratio, PL intensity of Pr： CBT fine particles become stronger and stronger. When pressure was loaded on the Pr： CBT pellet, mechanoluminescence（ML） emission was measured. The results show that the ML intensity is proportional to the applied pressure.
基金supported by National Natural Science Foundation of China (Grant No. 50575220)
文摘Thermally Grown Oxide（TGO） is a dominating component in controlling the effectiveness of thermal barrier coating.During the growth of TGO,whether we could homogeneously distribute Al atom on the TGO and the intermediate metal layer will be the key factor in forming TGO with continuous,uniform and single-ingredient（Al2O3）.In this experiment,we bombarded particles on to the metallic bound layer.We studied the influence of supersonic particle bombardment on the diffusion of Al.We hope to control the growth of TGO by monitoring the diffusion of Al.Thermal barrier coating（TBC）,which consists of a NiCoCrAlY bond coat and a ZrO2-8Y2O3（wt.%） topcoat（TC）,is fabricated on the nickel-base superalloy by air plasma spray（APS）.NiCoCrAlY bond coat is treated by supersonic fine particles bombarding（SFPB）.The morphology,oxidation behavior of TBC and phase are characterized by scanning electron microscope（SEM） equipped with an energy dispersive spectromrter（EDS） and X-ray diffractometer（XRD）.The influence of supersonic fine particles bombarding technique on the service life of thermal barrier coating is studied.The results show that SFPB technique improves the flaw of excessive surface undulation in the as-sprayed bond coat.A continuous,uniform and single-ingredient（Al2O3） TGO can quickly form in the SFPB TBC during high temperature oxidation process.The thickening of TGO is relatively slow.These will effectively suppress the formation of other non-protective oxides.Therefore,SFPB technique reduces the growth stress level generated by the continuous growth of TGO,and also avoids the stress concentration induced by formation of the large particle spinal oxide.Thermal barrier coating still remains well after 350 thermal cycles.The service life of TBC is improved.The proposed research provides theoretical basis and technical references to further improve and enhance the SFPB technique.
基金Sponsored by the National Natural Science Foundation of China ( Grant No 60879018)
文摘Thermal barrier coating ( TBC) consisting of a NiCoCrAlY bond coat ( BC) and a ZrO2-8 wt. % Y2O3 topcoat ( TC) was fabricated on the nickel-base superalloy by air plasma spray ( APS) . The BC was treated by supersonic fine particle bombarding ( SFPB) . Thermal cyclic failure and residual stress in thermally grown oxide ( TGO) scale were studied by SEM with EDS and ruby fluorescence spectroscopy ( RFS) . As shown in the results,after treated by SFPB,thickening of TGO was relatively slow,which reduced the level of growth stress. The TBC with SFPB treatment was still remained well undergoing 350 times of thermal cycle. However,after thermal cycle with the same times,the separation of TC was observed in TBC without SFPB treatment. The residual stress analysis by RFS showed that the residual stress of SFPB-treated TBC increased with the increasing number of thermal cycle. The residual stress of conventional TBC reached a value of 650 MPa at 350 times of cycle and that of SFPB-treated TBC only reached 532 MPa at 400 times of cycle. The BC with SFPB treatment after 400 times of cycle was analyzed by RFS,the high stress value was not observed in local thickened region of TGO. Thermal cycling resistance of TBC can be improved by the SFPB technology.
基金Supported by West Light Joint Scholar Project of Chinese Academy of Sciences
文摘[Objective] The aim was to study the concentration characteristics and sources of chemical elements in atmospheric fine particles (PM2.5) in autumn in Xi’an City. [Method] By means of mini-volume sampler, PM2.5 samples in atmosphere in Xi’an were collected in October 2009, and the concentration characteristics and sources of elements in PM2.5 were analyzed. [Result] The average mass concentration of PM2.5 in atmosphere in autumn in Xi’an City was 168.44 μg/m3 which was higher than that of Beijing and Pearl River Delta area, and the minimum and maximum value were 53.29 and 358.16 μg/m3, respectively. The mass concentration of S, Zn, K, Cl, Ca and Fe in PM2.5 was above 1.0 μg/m3, being at high pollution level. In addition, K had obvious correlation with organic carbon (OC) and element carbon (EC), with the correlation coefficients of 0.76 and 0.75 (P<0.000 1), respectively, and it showed that OC and EC had the same source as K, namely biomass burning had certain contribution to OC and EC. Enrichment factors analysis revealed that K, Ca, Fe, Ti, Mn and Cr mainly came from earth crust, rock weathering and other natural sources, while anthropogenic pollution sources had great effects on S, Zn, Cl, Pb, Br, Mo, Cd and As which were affected by soil dust and other natural sources slightly, and Cd had the highest enrichment factor and mainly came from metal smelting. In a word, coal combustion, biomass burning, vehicle emissions, metallurgical, chemical industry and dust were the main sources of PM2.5 in autumn in Xi’an. [Conclusion] The study could provide theoretical foundation for the control of urban environmental pollution.
基金supported by the Project of Natural Science Foundation of China(Nos.4117511121177078)the Project of Environmental Protection Public Science and Technology Research Fund(No.201309016)。
文摘The pollution characteristics of surfactant substances in fine particles(PM_(2.5))in spring were studied in the Beibu Gulf Region of China,68 samples of PM_(2.5)were collected at Weizhou Island in Beihai City from March 12 to April 17,2015.The Anionic Surfactant Substances(ASS)and Cationic Surfactant Substances(CSS)in the samples were analyzed using Byethyl Violet Spectrophotometry and Disulfide Blue Spectrophotometry,respectively.Combined with the data from backward trajectory simulation,the effects of air pollutants from remote transport on the pollution characteristics of surfactant substances in PM_(2.5)in the Beibu Gulf Region were analyzed and discussed.The results showed that the daily mean concentrations of ASS and CSS in spring in the Beibu Gulf Region were 165.20 pmol/m^(3)and 8.05 pmol/m^(3),and the variation ranges were 23.21–452.55 pmol/m^(3)and 0.65–31.31 pmol/m^(3),accounting for 1.82‰±1.65‰and 0.12‰±0.11‰of the mass concentration of PM_(2.5),respectively.These concentrations were lower than those in comparable regions around the world.There was no clear correlation between the concentrations of ASS and CSS in PM_(2.5)and the mass concentrations of PM_(2.5).Tourism and air transport had a positive contribution on the concentrations of ASS.The concentration of surfactant substances in PM_(2.5)was significantly impacted by wind speed and wind direction.Atmospheric temperature,air pressure and precipitation had little effect on the concentrations of surfactant substances.Surfactant substances in PM_(2.5)significantly impacted visibility.Results also showed that the main sources of surfactant substances were from the southern China and Southeast Asia.
基金supported by the National Natural Science Foundation of China(No.42075182)the Science and Technology Pre-research Project for Collaborative Prevention and Control on O3 and PM2.5 Compound Pollution(No.DQGG202026)the Three-dimensional Comprehensive Observation Research Program for O3and PM2.5Compound Pollution in Key Areas in Summer 2021(No.DQGG2021101)
文摘Over the past few decades,the metal elements(MEs)in atmospheric particles have aroused great attention.Some well-established techniques have been used to measure particlebound MEs.However,each method has its own advantages and disadvantages in terms of complexity,accuracy,and specific elements of interest.In this study,the performances of inductively coupled plasma-optical emission spectrometry(ICP-OES)and total reflection X-ray fluorescence spectroscopy(TXRF)were evaluated for quality control to analyze data accuracy and precision.The statistic methods(Deming regression and significance testing)were applied for intercomparison between ICP-OES and TXRF measurements for same lowloading PM_(2.5)samples in Weizhou Island.The results from the replicate analysis of standard filters(SRM 2783)and field filters samples indicated that 10 MEs(K,Ca,V,Cr,Mn,Fe,Ni,Cu,Zn,and Pb)showed good accuracies and precision for both techniques.The higher accuracy tended to the higher precision in the MEs analysis process.In addition,the interlab comparisons illustrated that V and Mn all had good agreements between ICP-OES and TXRF.The measurements of K,Cu and Zn were more reliable by TXRF analysis for low-loading PM_(2.5).ICP-OES was more accurate for the determinations for Ca,Cr,Ni and Pb,owing to the overlapping spectral lines and low sensitivity during TXRF analysis.The measurements of Fe,influenced by low-loading PM_(2.5),were not able to determine which instrument could obtain more reliable results.These conclusions could provide reference information to choose suitable instrument for the determination of MEs in low-loading PM_(2.5)samples.
基金supported by the National Natural Science Foundation of China(21878099)the Science and Technology Commission of Shanghai Municipality(19DZ1208000)。
文摘To address the shortcomings of existing particulate matter trapping technology,especially the low separation efficiency of fine particles,herein,a novel gas cyclone-liquid jet separator was developed to research fine particle trapping.First,numerical simulation methods were used to investigate the flow field characteristics and dust removal efficiency of the separator under different working conditions,and to determined suitable experimental conditions for subsequent dust removal experiments.Afterward,the separation efficiency of the separator against five kinds of common particles,including g-C_(3)N_(4),TiO_(2),SiC,talc,and SiO_(2),was experimentally studied.A maximum separation efficiency of 99.48%was achieved for particles larger than 13.1μm,and 96.55%efficiency was achieved for particles larger than 2μm.The best crushing atomization effect was achieved for the separator when uGwas 10 m·s^(-1)and uLwas 3 m·s^(-1),while the best separation effect was achieved when uGwas 10 m·s^(-1)and uLwas 3.75 m·s^(-1).Studies have shown that the gas cyclone-liquid jet separator has excellent applicability in the separation of fine particles.
文摘A technique for preparing perovskite type oxides was developed. By this technique, ultra fine particles of La 0.9 RE 0.1 MnO 3 (RE: Y, Ce, Pr, Sm, Gd,or Dy) with high surface area and single perovskite structure were prepared, and the series of La 0.9 RE 0.1 MnO 3 catalysts were studied experimentally. The so prepared ultra fine particles exhibites high catalytic activity for CH 4 total oxidation. The ultra fine particles of La 0.9 RE 0.1 MnO 3 (except for La 0.9 Pr 0.1 MnO 3) prepared by this method are thermally much more stable than LaMnO 3. Of the La 0.9 RE 0.1 MnO 3 series, La 0.9 Y 0.1 MnO 3 is most thermally stable, and La 0.9 Y 0.1 MnO 3 or La 0.9 Gd 0.1 MnO 3 (varies with calcination temperature) exhibits the highest catalytic activity for total oxidation of methane. The specific surface area of La 0.9 Y 0.1 MnO 3 calcined at 1000 ℃ reaches 14.9 m 2·g -1 , while the specific surface area of LaMnO 3 calcined at the same temperature is only 1.8 m 2·g -1 .
基金supported by ANSES (French Agency for Food,Environmental and Occupational Health and SafetyPUFBIO project,Grant number EST-2017-190)+5 种基金co-supported by the Regional Council of Normandy and the European Union in the framework of the ERDF-ESF (CellSTEM project)a PhD fellowship funded by ADEME(Agency for Ecological Transition)financed by the Labex SynOrg(ANR-11-LABX-0029)the European Regional Development Fund (ERDF HN0001343)Financial support from the National Fourier transform ion cyclotron resonance network (FR 3624 CNRS)the European Union’s Horizon 2020 Research Infrastructures program (grant agreement 731077).
文摘Ultrafine particles represent a growing concern in the public health community but their precise role in many illnesses is still unknown. This lack of knowledge is related to the experimental difficulty in linking their biological effects to their multiple properties, which are important determinants of toxicity. Our aim is to propose an interdisciplinary approach to study fine(FP) and ultrafine(UFP) particles, generated in a controlled manner using a mini CAST(Combustion Aerosol Standard) soot generator used with two different operating conditions(CAST1 and CAST3). The chemical characterization was performed by an untargeted analysis using ultra-high resolution mass spectrometry. In conjunction with this approach, subsequent analysis by gas chromatography–mass spectrometry(GC–MS) was performed to identify polycyclic aromatic hydrocarbons(PAH). CAST1 enabled the generation of FP with a predominance of small PAH molecules, and CAST3 enabled the generation of UFP, which presented higher numbers of carbon atoms corresponding to larger PAH molecules. Healthy normal human bronchial epithelial(NHBE) cells differentiated at the air-liquid interface(ALI) were directly exposed to these freshly emitted FP and UFP. Expression of MUC5AC, FOXJ1, OCLN and ZOI as well as microscopic observation confirmed the ciliated pseudostratified epithelial phenotype. Study of the mass deposition efficiency revealed a difference between the two operating conditions, probably due to the morphological differences between the two categories of particles. We demonstrated that only NHBE cells exposed to CAST3 particles induced upregulation in the gene expression of IL-8 and NQO1. This approach offers new perspectives to study FP and UFP with stable and controlled properties.
