Squaraine （SQ） dyes have been considered as efficient photoactive materials for organic solar cells. In this work, we purposely controlled the molecular aggregation of an SQ dye, 2,4-bis[4-（N,N-dibutylamino）-2-dih...Squaraine （SQ） dyes have been considered as efficient photoactive materials for organic solar cells. In this work, we purposely controlled the molecular aggregation of an SQ dye, 2,4-bis[4-（N,N-dibutylamino）-2-dihydroxyphenyl] SQ （DBSQ- （OH）2） in the DBSQ（OH）2：[6,6]-phenyl-Cel-butyric acid methyl ester （PCBM） blend film by using the thermal annealing method, to study the influence of the molecular aggregation on film properties as well as the photovoltaic performance of DBSQ（OH）2：PCBM-based bulk heterojunction （BHJ） solar cells. Our results demonstrate that thermal annealing may change the aggregation behavior of DBSQ（OH）2 in the DBSQ（OH）2：PCBM film, and thus significantly influence the surface morphology, optical and electrical properties of the blend film, as well as the photovoltaic performance of DBSQ（OH）2：PCBM BHJ cells.展开更多
The films deposited at low temperature（LT-films） have increasingly attracted theoretical and technical interests since such films exhibit obvious difference in structure and performances compared to those deposited ...The films deposited at low temperature（LT-films） have increasingly attracted theoretical and technical interests since such films exhibit obvious difference in structure and performances compared to those deposited at room temperature.Studies on the tribological properties of LT-films are rarely reported in available literatures.In this paper,the structure,morphology and tribological properties of Ag films,deposited at LT（166 K） under various Ar pressures on AISI 440C steel substrates by arc ion plating（AIP）,are studied by X-ray diffraction（XRD）,atomic force microscopy（AFM） and a vacuum ball-on-disk tribometer,and compared with the Ag films deposited at RT（300 K）.XRD results show that（200） preferred orientation of the films is promoted at LT and low Ar pressure.The Crystallite sizes are 70 nm-80 nm for LT-Ag films deposited at 0.2 Pa and 0.8 Pa and larger than 100 nm for LT-Ag films deposited at 0.4 Pa and 0.6 Pa,while they are 55 nm-60 nm for RT-Ag films deposited at 0.2 Pa-0.6 Pa and 37 nm for RT-Ag films deposited at 0.8 Pa.The surfaces of LT-Ag films are fibre-like at 0.6 Pa and 0.8 Pa,terrace-like at 0.4 Pa,and sphere-like at 0.2 Pa,while the surfaces of RT-Ag films are composed of sphere-like grains separated by voids.Wear tests reveal that,due to the compact microstructure LT-Ag films have better wear resistances than RT-Ag film.These results indicate that the microstructure and wear resistance of Ag films deposited by AIP can be improved by low temperature deposition.展开更多
The structure, electrical transport, and optical properties of GaSe films fabricated by means of radio-frequency (RF) magnetron sputtering in Ar were investigated. The as-sputtered GaSe films were amorphous, and their...The structure, electrical transport, and optical properties of GaSe films fabricated by means of radio-frequency (RF) magnetron sputtering in Ar were investigated. The as-sputtered GaSe films were amorphous, and their optical energy gap Eg are 1.9～2.6 eV. The effect of the synthesis conditions on the optical and electrical properties of the GaSe films has also been studied展开更多
Indium tin oxide (ITO) films were prepared on polyester, Si and glass substrate with relatively high deposition rate of above 0.9 nm/s by DC reactive magnetron sputtering technique at the sputtering pressure of 0.06 P...Indium tin oxide (ITO) films were prepared on polyester, Si and glass substrate with relatively high deposition rate of above 0.9 nm/s by DC reactive magnetron sputtering technique at the sputtering pressure of 0.06 Pa system, respectively. The dependence of resistivity on deposition parameters, such as deposition rate, target-to-substrate distance (TSD), oxygen flow rate and sputtering time (thickness), has been investigated, together with the structural and the optical properties. It was revealed that all ITO films exhibited lattice expansion. The resistivity of ITO thin films shows significant substrate effect: much lower resistivity and broader process window have been reproducibly achieved for the deposition of ITO films onto polyester rather than those prepared on both Si and glass substrates. The films with resistivity of as low as 4.23 x 10^-4 Ω.cm and average transmittance of ～78% at wavelength of 400～700 nm have been achieved for the films on polyester at room temperature.展开更多
We quantitatively investigate the third-order optical nonlinear response of Co-doped ZnO thin films prepared by magnetron sputtering using the Z-scan method. The two-photon absorption and optical Kerr effect are revea...We quantitatively investigate the third-order optical nonlinear response of Co-doped ZnO thin films prepared by magnetron sputtering using the Z-scan method. The two-photon absorption and optical Kerr effect are revealed to contribute to the third-order nonlinear response of the Co-doped ZnO films. The nonlinear absorption coefficient β is determined to be approximately 8.8 × 10-5 cm/W and the third-order nonlinear susceptibility X（3） is 2.93 × 10-6 esu. The defect-associated energy levels within the band gap are suggested to be responsible for the enhanced nonlinear response observed in Co-doped ZnO films.展开更多
Nanocrystalline TiN films were prepared by DC reactive magnetron sputtering.The influence of substrate biases on structure,mechanical and corrosion properties of the deposited films was studied using X-ray diffraction...Nanocrystalline TiN films were prepared by DC reactive magnetron sputtering.The influence of substrate biases on structure,mechanical and corrosion properties of the deposited films was studied using X-ray diffraction,field emission scanning electron microscopy,nanoindentation and electrochemical techniques.The deposited films have a columnar structure,and their preferential orientation strongly depends on bias voltage.The preferential orientations change from（200）plane at low bias to（111）plane at moderate bias and then to（220）plane at relatively high bias.Nanohardness H,elastic modulus E,H/E＊and H3/E＊2 ratios,and corrosion resistance of the deposited films increase first and then decrease with the increase in bias voltage.All the best values appear at bias of-120 V,attributing to the film with a fine,compact and less defective structure.This demonstrates that there is a close relation among microstructure,mechanical and corrosion properties of the TiN films,and the film with the best mechanical property can also provide the most effective corrosion protection.展开更多
MoS2/Zr composite films were deposited on the cemented carbide YT14 （WC＋14%TiC＋6%Co） by medium-frequency magnetron sputtered and coupled with multi-arc ion plated techniques.The influence of negative bias voltage ...MoS2/Zr composite films were deposited on the cemented carbide YT14 （WC＋14%TiC＋6%Co） by medium-frequency magnetron sputtered and coupled with multi-arc ion plated techniques.The influence of negative bias voltage on the composite film properties,including adhesion strength,micro-hardness,thickness and tribological properties were investigated.The results showed that proper negative bias voltage could significantly improve the mechanical and tribological properties of composite films.The effects of negative bias voltage on film properties were also put forward.The optimal negative bias voltage was -200 V under this experiment conditions.The obtained composite films were dense,the adhesion strength was about 60 N,the thickness was about 2.4 μm,and the micro-hardness was about 9.0 GPa.The friction coefficient and wear rate was 0.12 and 2.1×10-7 cm3/N·m respectively after 60 m sliding operation against hardened steel under a load of 20 N and a sliding speed of 200 rev·min-1.展开更多
MnGa films were grown by magnetron sputtering on thermally oxidized Si（Si/SiO2） and glass substrates. Films grown on single-crystal Si（100） substrate with different underlayers were prepared for comparison. It is ...MnGa films were grown by magnetron sputtering on thermally oxidized Si（Si/SiO2） and glass substrates. Films grown on single-crystal Si（100） substrate with different underlayers were prepared for comparison. It is found that the Si/SiO2 substrate is more suitable for growing high-coercivity MnGa films than the glass substrate, which is the result of the isolated-island-like growth. A coercivity of 9.7 kOe can be achieved for the 10 nm MnGa films grown on Si/SiO2 substrate at substrate temperature TS of 450 °C.Optimized experimental conditions are specified by changing the thickness of the MnGa films and the temperature of the substrates.展开更多
Thin films of Cu2 x S（x = 0, 1） were deposited on self-assembled, monolayer modified substrates in the copper–thiosulfate system with various concentrations of ethylene diamine tetraacetic acid（EDTA） at a low tem...Thin films of Cu2 x S（x = 0, 1） were deposited on self-assembled, monolayer modified substrates in the copper–thiosulfate system with various concentrations of ethylene diamine tetraacetic acid（EDTA） at a low temperature of 70 8C. The thin films were characterized by means of X-ray diffraction（XRD）, X-ray photoelectron spectroscope（XPS）, field emission scanning electron microscopy（FESEM）, transmission electron microscopy（TEM）. The optical and photoelectrochemical（PEC） properties of the Cu2 x S semiconductor films were investigated by ultraviolet–visible（UV–vis） absorption spectroscopy and a three-electrode system. It is found that EDTA plays a key role in the process of Cu2 x S nanocrystals formation and growth. The compositions of the Cu2 x S nanocrystals varied from Cu2S（chalcocide） to Cu S（covellite） through adjusting the concentration of EDTA, which is used as a complexing agent to yield high-quality Cu2 x S films. The growth mechanisms of Cu2 x S nanocrystals with different EDTA concentrations are proposed and discussed in detail.展开更多
Thin films of zinc-doped cadmium oxide with different Zn-doping levels（0, 2, 4, 6, and 8 at%） were deposited on glass substrates by employing an inexpensive, simplified spray technique using perfume atomizer at rela...Thin films of zinc-doped cadmium oxide with different Zn-doping levels（0, 2, 4, 6, and 8 at%） were deposited on glass substrates by employing an inexpensive, simplified spray technique using perfume atomizer at relatively low substrate temperature（375 °C） compared with the conventional spray method. The effect of Zn doping on the structural,morphological, optical, and electrical properties of the films was investigated. XRD patterns revealed that all the films are polycrystalline in nature having cubic crystal structure with a preferential orientation along the（1 1 1） plane irrespective of Zn-doping level. Zn-doping level causes a slight shift in the（1 1 1） diffraction peak toward higher angle. The crystallite size of the films was found to be in the range of 28–37 nm. The band gap value increases with Zn doping and reaches a maximum of 2.65 eV for the film coated with 6 at% Zn doping and for further higher doping concentration it decreases.Electrical studies indicate that Zn doping causes a reduction in the resistivity of the films and a minimum resistivity of15.69 X cm is observed for the film coated with 6 at% Zn.展开更多
Cu ion implantation and subsequent rapid annealing at 500℃ in N2 result in low surface resistivity of 1.611 ohm/sq with high mobility of 290 cm2 V-1S-1 for microcrystalline diamond （MCD） films. Its electrical field...Cu ion implantation and subsequent rapid annealing at 500℃ in N2 result in low surface resistivity of 1.611 ohm/sq with high mobility of 290 cm2 V-1S-1 for microcrystalline diamond （MCD） films. Its electrical field emission behavior can be turned on at Eo = 2.6 V/μm, attaining a current density of 19.5μA/cm2 at an applied field of 3.5 V/#m. Field emission scanning electron microscopy combined with Raman and x-ray photoelectron mi- croscopy reveal that the formation of Cu nanoparticles in MCD films can catalytically convert the less conducting disorder/a-C phases into graphitic phases and can provoke the formation of nanographite in the films, forming conduction channels for electron transportation.展开更多
For the purpose of alleviating the adverse effect of paste aging on the properties of corn starch film, a series of electroneutrally quaternized/sulfosuccinylated starches（EQSS） with different degrees of substitutio...For the purpose of alleviating the adverse effect of paste aging on the properties of corn starch film, a series of electroneutrally quaternized/sulfosuccinylated starches（EQSS） with different degrees of substitution（DS） were synthesized via the quaternization/sulfosuccination of acid-thinned corn starch（ATS） by varying the amounts of N-（3-chloro-2-hydroxypropl） trimethylammonium chloride, maleic anhydride, and sodium hydrogen sulfite. The influence of paste aging on the properties of starch film cast from heat-induced starch paste was investigated and the properties were explored in terms of tensile strength, elongation, work at break, degree of crystallinity, and flex-fatigue resistance. The experimental results showed that the paste ageing generated adverse influence on the elongation, work at break, and flex-fatigue resistance of starch film. Further experiments showed that electroneutral quaternization/sulfosuccination of starch were able to alleviate the negative effect of paste ageing on the elongation, work at break, and flex-fatigue resistance, thereby obviously enhancing the elongation, work at break and flex-fatigue resistance, and thus reducing the drawback of brittleness. The enhancement depended on the amounts of the substituents introduced. With the increase in DS value, the elongation and work at break as well as flex-fatigue resistance continuously rose, whereas the tensile strength gradually reduced.展开更多
Following are the comments for the queries raised by Prof. Pawel E. Tomaszewski on our published paper entitled ＂Structural, Optical, and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Sp...Following are the comments for the queries raised by Prof. Pawel E. Tomaszewski on our published paper entitled ＂Structural, Optical, and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Spray Pyrolysis Technique＂ by K. Usharani and A.R. Balu published in Acta Metall. Sin.展开更多
Transparent zinc oxide（ZnO） thin films are fabricated by a simple sol-gel spin-coating technique on glass substrates with different solution concentrations（0.3-1.2 M） using zinc acetate dehydrate [Zn（CH_3COO）_2&...Transparent zinc oxide（ZnO） thin films are fabricated by a simple sol-gel spin-coating technique on glass substrates with different solution concentrations（0.3-1.2 M） using zinc acetate dehydrate [Zn（CH_3COO）_2·2H_2O] as precursor and isopropanol and monoethanolamine（MEA） as solvent and stabilizer, respectively. The molar ratio of zinc acetate dehydrate to MEA is 1.0. X-ray diffraction, ultraviolet-visible spectroscopy and photoluminescence spectroscopy are employed to investigate the effect of solution concentration on the structural and optical properties of the ZnO thin films. The obtained results of all thin films are discussed in detail and are compared with other experimental data.展开更多
The synthesis of phthalocyanines bearing one crown ether macrocycle and three alkoxyl chains is described. They form stable monolayers and can be employed for the preparation of multilayer films by the Langmuir-Bloget...The synthesis of phthalocyanines bearing one crown ether macrocycle and three alkoxyl chains is described. They form stable monolayers and can be employed for the preparation of multilayer films by the Langmuir-Blogett technique. The orientations of the molecules in the film were affected by alkali metal ions in the subphase. lt is suggested that a kind of 'sandwich' dimer was formed in the film induced by potassium ions展开更多
Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices of different thicknesses are prepared on the silicon dioxide substrates by magnetron sputtering technique and thermally annealed at 573 K for 30 min. Thermoelectric...Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices of different thicknesses are prepared on the silicon dioxide substrates by magnetron sputtering technique and thermally annealed at 573 K for 30 min. Thermoelectric（TE）measurements indicate that optimal thickness and thickness ratio improve the TE performance of Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices, respectively. High TE performances with figure-of-merit（ZT） values as high as 1.32 and 1.56 are achieved at 443 K for 30 nm and 50 nm Bi_2Te_3 thin films, respectively. These ZT values are higher than those of p-type Bi_2Te_3 alloys as reported. Relatively high ZT of the GeTe/B_2Te_3 superlattices at 300-380 K were 0.62-0.76. The achieved high ZT value may be attributed to the unique nano-and microstructures of the films,which increase phonon scattering and reduce thermal conductivity. The results indicate that Bi_2Te_3-based thin films can serve as high-performance materials for applications in TE devices.展开更多
Ta-doped titanium dioxide films are deposited on fused quartz substrates using the rf magnetron sputtering technique at different substrate temperatures. After post-annealing at 550℃ in a vacuum, all the films are cr...Ta-doped titanium dioxide films are deposited on fused quartz substrates using the rf magnetron sputtering technique at different substrate temperatures. After post-annealing at 550℃ in a vacuum, all the films are crystallized into the polycrystalline anatase TiO2 structure. The effects of substrate temperature from room temperature up to 350℃ on the structure, morphology, and photoelectric properties of Ta-doped titanium dioxide films are analyzed. The average transmittance in the visible region（400-800 nm） of all films is more than 73%.The resistivity decreases firstly and then increases moderately with the increasing substrate temperature. The polycrystalline film deposited at 150℃ exhibits a lowest resistivity of 7.7 × 10^-4Ω·cm with the highest carrier density of 1.1×10^21 cm^-3 and the Hall mobility of 7.4 cm^2·V^-1s^-1.展开更多
Electrical properties of C/Ni films are studied using four mosaic targets made of pure graphite and stripes of nickel with the surface areas of 1.78,3.21,3.92 and 4.64%.The conductivity data in the temperature range o...Electrical properties of C/Ni films are studied using four mosaic targets made of pure graphite and stripes of nickel with the surface areas of 1.78,3.21,3.92 and 4.64%.The conductivity data in the temperature range of400-500 K shows the extended state conduction.The conductivity data in the temperature range of 150-300 K shows the multi-phonon hopping conduction.The Berthelot-type conduction dominates in the temperature range of 50-150 K.The conductivity of the films in the temperature range about 〈 50 K is described in terms of variable-range hopping conduction.In low temperatures,the localized density of state around Fermi level（F）for the film deposition with 3.92% nickel has a maximum value of about 56.2×10^（17）cm^（-3）eV^（-1） with the minimum average hopping distance of about 3.43 × 10^（-6） cm.展开更多
CdSe films are of great interest for use in thin film photoelectric devices. A simple chemical precipitation method is adopted for the first time to synthesise CdSe powder. Films on glass obtained at different substra...CdSe films are of great interest for use in thin film photoelectric devices. A simple chemical precipitation method is adopted for the first time to synthesise CdSe powder. Films on glass obtained at different substrate temperatures TS such as 300, 373, 423 and 473 K have been characterised by X-ray diffraction, optical absorption and Hall measurements.展开更多
基金This work was financially supported by the National Natural Science Foundation of China （Grant No. 61604093）, the Shanghai Pujiang Program （16PJ1403300）, the Natural Science Foundation of Shanghai （16ZR1411000）, the Science and Technology Commission of Shanghai Municipality Program （17DZ2281700）, and the Shanghai Software and integrated circuit industry development special funds （170401）.
文摘Squaraine （SQ） dyes have been considered as efficient photoactive materials for organic solar cells. In this work, we purposely controlled the molecular aggregation of an SQ dye, 2,4-bis[4-（N,N-dibutylamino）-2-dihydroxyphenyl] SQ （DBSQ- （OH）2） in the DBSQ（OH）2：[6,6]-phenyl-Cel-butyric acid methyl ester （PCBM） blend film by using the thermal annealing method, to study the influence of the molecular aggregation on film properties as well as the photovoltaic performance of DBSQ（OH）2：PCBM-based bulk heterojunction （BHJ） solar cells. Our results demonstrate that thermal annealing may change the aggregation behavior of DBSQ（OH）2 in the DBSQ（OH）2：PCBM film, and thus significantly influence the surface morphology, optical and electrical properties of the blend film, as well as the photovoltaic performance of DBSQ（OH）2：PCBM BHJ cells.
基金supported by National Basic Research Program of China(973 Project,Grant No.2007CB607601)National Natural Science Foundation of China (Grant No. 50301015)
文摘The films deposited at low temperature（LT-films） have increasingly attracted theoretical and technical interests since such films exhibit obvious difference in structure and performances compared to those deposited at room temperature.Studies on the tribological properties of LT-films are rarely reported in available literatures.In this paper,the structure,morphology and tribological properties of Ag films,deposited at LT（166 K） under various Ar pressures on AISI 440C steel substrates by arc ion plating（AIP）,are studied by X-ray diffraction（XRD）,atomic force microscopy（AFM） and a vacuum ball-on-disk tribometer,and compared with the Ag films deposited at RT（300 K）.XRD results show that（200） preferred orientation of the films is promoted at LT and low Ar pressure.The Crystallite sizes are 70 nm-80 nm for LT-Ag films deposited at 0.2 Pa and 0.8 Pa and larger than 100 nm for LT-Ag films deposited at 0.4 Pa and 0.6 Pa,while they are 55 nm-60 nm for RT-Ag films deposited at 0.2 Pa-0.6 Pa and 37 nm for RT-Ag films deposited at 0.8 Pa.The surfaces of LT-Ag films are fibre-like at 0.6 Pa and 0.8 Pa,terrace-like at 0.4 Pa,and sphere-like at 0.2 Pa,while the surfaces of RT-Ag films are composed of sphere-like grains separated by voids.Wear tests reveal that,due to the compact microstructure LT-Ag films have better wear resistances than RT-Ag film.These results indicate that the microstructure and wear resistance of Ag films deposited by AIP can be improved by low temperature deposition.
文摘The structure, electrical transport, and optical properties of GaSe films fabricated by means of radio-frequency (RF) magnetron sputtering in Ar were investigated. The as-sputtered GaSe films were amorphous, and their optical energy gap Eg are 1.9～2.6 eV. The effect of the synthesis conditions on the optical and electrical properties of the GaSe films has also been studied
文摘Indium tin oxide (ITO) films were prepared on polyester, Si and glass substrate with relatively high deposition rate of above 0.9 nm/s by DC reactive magnetron sputtering technique at the sputtering pressure of 0.06 Pa system, respectively. The dependence of resistivity on deposition parameters, such as deposition rate, target-to-substrate distance (TSD), oxygen flow rate and sputtering time (thickness), has been investigated, together with the structural and the optical properties. It was revealed that all ITO films exhibited lattice expansion. The resistivity of ITO thin films shows significant substrate effect: much lower resistivity and broader process window have been reproducibly achieved for the deposition of ITO films onto polyester rather than those prepared on both Si and glass substrates. The films with resistivity of as low as 4.23 x 10^-4 Ω.cm and average transmittance of ～78% at wavelength of 400～700 nm have been achieved for the films on polyester at room temperature.
基金Supported by National Basic Research Program of China under Grant Nos 2011CB922200 and 2013CB922303
文摘We quantitatively investigate the third-order optical nonlinear response of Co-doped ZnO thin films prepared by magnetron sputtering using the Z-scan method. The two-photon absorption and optical Kerr effect are revealed to contribute to the third-order nonlinear response of the Co-doped ZnO films. The nonlinear absorption coefficient β is determined to be approximately 8.8 × 10-5 cm/W and the third-order nonlinear susceptibility X（3） is 2.93 × 10-6 esu. The defect-associated energy levels within the band gap are suggested to be responsible for the enhanced nonlinear response observed in Co-doped ZnO films.
基金supported by the National Natural Science Foundation of China(51171118)
文摘Nanocrystalline TiN films were prepared by DC reactive magnetron sputtering.The influence of substrate biases on structure,mechanical and corrosion properties of the deposited films was studied using X-ray diffraction,field emission scanning electron microscopy,nanoindentation and electrochemical techniques.The deposited films have a columnar structure,and their preferential orientation strongly depends on bias voltage.The preferential orientations change from（200）plane at low bias to（111）plane at moderate bias and then to（220）plane at relatively high bias.Nanohardness H,elastic modulus E,H/E＊and H3/E＊2 ratios,and corrosion resistance of the deposited films increase first and then decrease with the increase in bias voltage.All the best values appear at bias of-120 V,attributing to the film with a fine,compact and less defective structure.This demonstrates that there is a close relation among microstructure,mechanical and corrosion properties of the TiN films,and the film with the best mechanical property can also provide the most effective corrosion protection.
基金Funded by the National Natural Science Foundation of China (No.51075237)the National Basic Research Program of China (No.2009CB724402)+3 种基金the Taishan Scholar Program of Shandong Provincethe Outstanding Young Scholar Science Foundation of Shandong (No.JQ200917)the National Natural Science Foundation of Shandong (No.ZR2010EZ002)National High Technology Research and Development Program (No.2009AA044303)
文摘MoS2/Zr composite films were deposited on the cemented carbide YT14 （WC＋14%TiC＋6%Co） by medium-frequency magnetron sputtered and coupled with multi-arc ion plated techniques.The influence of negative bias voltage on the composite film properties,including adhesion strength,micro-hardness,thickness and tribological properties were investigated.The results showed that proper negative bias voltage could significantly improve the mechanical and tribological properties of composite films.The effects of negative bias voltage on film properties were also put forward.The optimal negative bias voltage was -200 V under this experiment conditions.The obtained composite films were dense,the adhesion strength was about 60 N,the thickness was about 2.4 μm,and the micro-hardness was about 9.0 GPa.The friction coefficient and wear rate was 0.12 and 2.1×10-7 cm3/N·m respectively after 60 m sliding operation against hardened steel under a load of 20 N and a sliding speed of 200 rev·min-1.
基金financially supported by the National Natural Science Foundation of China (Nos. 51590883, 51471167, 51271179 and 51571194)the project of Chinese Academy of Sciences with grant number KJZD-EW-M05-3supported by a Joint Research Project from Ministry of Science, ICT and Future Planning/Korea Research Council for Industrial Science and Technology
文摘MnGa films were grown by magnetron sputtering on thermally oxidized Si（Si/SiO2） and glass substrates. Films grown on single-crystal Si（100） substrate with different underlayers were prepared for comparison. It is found that the Si/SiO2 substrate is more suitable for growing high-coercivity MnGa films than the glass substrate, which is the result of the isolated-island-like growth. A coercivity of 9.7 kOe can be achieved for the 10 nm MnGa films grown on Si/SiO2 substrate at substrate temperature TS of 450 °C.Optimized experimental conditions are specified by changing the thickness of the MnGa films and the temperature of the substrates.
基金the Person with ability introduce and scientific research item of northwest university for nationalities(No.xbmuyjrc1201204)the Fundamental Research Funds for the Central Universities(No.31920140083)for providing the financial support
文摘Thin films of Cu2 x S（x = 0, 1） were deposited on self-assembled, monolayer modified substrates in the copper–thiosulfate system with various concentrations of ethylene diamine tetraacetic acid（EDTA） at a low temperature of 70 8C. The thin films were characterized by means of X-ray diffraction（XRD）, X-ray photoelectron spectroscope（XPS）, field emission scanning electron microscopy（FESEM）, transmission electron microscopy（TEM）. The optical and photoelectrochemical（PEC） properties of the Cu2 x S semiconductor films were investigated by ultraviolet–visible（UV–vis） absorption spectroscopy and a three-electrode system. It is found that EDTA plays a key role in the process of Cu2 x S nanocrystals formation and growth. The compositions of the Cu2 x S nanocrystals varied from Cu2S（chalcocide） to Cu S（covellite） through adjusting the concentration of EDTA, which is used as a complexing agent to yield high-quality Cu2 x S films. The growth mechanisms of Cu2 x S nanocrystals with different EDTA concentrations are proposed and discussed in detail.
文摘Thin films of zinc-doped cadmium oxide with different Zn-doping levels（0, 2, 4, 6, and 8 at%） were deposited on glass substrates by employing an inexpensive, simplified spray technique using perfume atomizer at relatively low substrate temperature（375 °C） compared with the conventional spray method. The effect of Zn doping on the structural,morphological, optical, and electrical properties of the films was investigated. XRD patterns revealed that all the films are polycrystalline in nature having cubic crystal structure with a preferential orientation along the（1 1 1） plane irrespective of Zn-doping level. Zn-doping level causes a slight shift in the（1 1 1） diffraction peak toward higher angle. The crystallite size of the films was found to be in the range of 28–37 nm. The band gap value increases with Zn doping and reaches a maximum of 2.65 eV for the film coated with 6 at% Zn doping and for further higher doping concentration it decreases.Electrical studies indicate that Zn doping causes a reduction in the resistivity of the films and a minimum resistivity of15.69 X cm is observed for the film coated with 6 at% Zn.
基金Supported by the National Natural Science Foundation of China under Grant No 11405114the Natural Science Foundation of Shanxi Province under Grant No 2015021065
文摘Cu ion implantation and subsequent rapid annealing at 500℃ in N2 result in low surface resistivity of 1.611 ohm/sq with high mobility of 290 cm2 V-1S-1 for microcrystalline diamond （MCD） films. Its electrical field emission behavior can be turned on at Eo = 2.6 V/μm, attaining a current density of 19.5μA/cm2 at an applied field of 3.5 V/#m. Field emission scanning electron microscopy combined with Raman and x-ray photoelectron mi- croscopy reveal that the formation of Cu nanoparticles in MCD films can catalytically convert the less conducting disorder/a-C phases into graphitic phases and can provoke the formation of nanographite in the films, forming conduction channels for electron transportation.
基金Funded by the Open Project Program of Key Laboratory of Eco-Textiles,Ministry of Education,China(No.KLET0617)the Scientific Research Fund of Talent Introduction of Anhui Polytechnic University(No.2016YQQ004)
文摘For the purpose of alleviating the adverse effect of paste aging on the properties of corn starch film, a series of electroneutrally quaternized/sulfosuccinylated starches（EQSS） with different degrees of substitution（DS） were synthesized via the quaternization/sulfosuccination of acid-thinned corn starch（ATS） by varying the amounts of N-（3-chloro-2-hydroxypropl） trimethylammonium chloride, maleic anhydride, and sodium hydrogen sulfite. The influence of paste aging on the properties of starch film cast from heat-induced starch paste was investigated and the properties were explored in terms of tensile strength, elongation, work at break, degree of crystallinity, and flex-fatigue resistance. The experimental results showed that the paste ageing generated adverse influence on the elongation, work at break, and flex-fatigue resistance of starch film. Further experiments showed that electroneutral quaternization/sulfosuccination of starch were able to alleviate the negative effect of paste ageing on the elongation, work at break, and flex-fatigue resistance, thereby obviously enhancing the elongation, work at break and flex-fatigue resistance, and thus reducing the drawback of brittleness. The enhancement depended on the amounts of the substituents introduced. With the increase in DS value, the elongation and work at break as well as flex-fatigue resistance continuously rose, whereas the tensile strength gradually reduced.
文摘Following are the comments for the queries raised by Prof. Pawel E. Tomaszewski on our published paper entitled ＂Structural, Optical, and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Spray Pyrolysis Technique＂ by K. Usharani and A.R. Balu published in Acta Metall. Sin.
文摘Transparent zinc oxide（ZnO） thin films are fabricated by a simple sol-gel spin-coating technique on glass substrates with different solution concentrations（0.3-1.2 M） using zinc acetate dehydrate [Zn（CH_3COO）_2·2H_2O] as precursor and isopropanol and monoethanolamine（MEA） as solvent and stabilizer, respectively. The molar ratio of zinc acetate dehydrate to MEA is 1.0. X-ray diffraction, ultraviolet-visible spectroscopy and photoluminescence spectroscopy are employed to investigate the effect of solution concentration on the structural and optical properties of the ZnO thin films. The obtained results of all thin films are discussed in detail and are compared with other experimental data.
文摘The synthesis of phthalocyanines bearing one crown ether macrocycle and three alkoxyl chains is described. They form stable monolayers and can be employed for the preparation of multilayer films by the Langmuir-Blogett technique. The orientations of the molecules in the film were affected by alkali metal ions in the subphase. lt is suggested that a kind of 'sandwich' dimer was formed in the film induced by potassium ions
文摘Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices of different thicknesses are prepared on the silicon dioxide substrates by magnetron sputtering technique and thermally annealed at 573 K for 30 min. Thermoelectric（TE）measurements indicate that optimal thickness and thickness ratio improve the TE performance of Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices, respectively. High TE performances with figure-of-merit（ZT） values as high as 1.32 and 1.56 are achieved at 443 K for 30 nm and 50 nm Bi_2Te_3 thin films, respectively. These ZT values are higher than those of p-type Bi_2Te_3 alloys as reported. Relatively high ZT of the GeTe/B_2Te_3 superlattices at 300-380 K were 0.62-0.76. The achieved high ZT value may be attributed to the unique nano-and microstructures of the films,which increase phonon scattering and reduce thermal conductivity. The results indicate that Bi_2Te_3-based thin films can serve as high-performance materials for applications in TE devices.
基金Supported by the National Natural Science Foundation of China under Grant No 11374114
文摘Ta-doped titanium dioxide films are deposited on fused quartz substrates using the rf magnetron sputtering technique at different substrate temperatures. After post-annealing at 550℃ in a vacuum, all the films are crystallized into the polycrystalline anatase TiO2 structure. The effects of substrate temperature from room temperature up to 350℃ on the structure, morphology, and photoelectric properties of Ta-doped titanium dioxide films are analyzed. The average transmittance in the visible region（400-800 nm） of all films is more than 73%.The resistivity decreases firstly and then increases moderately with the increasing substrate temperature. The polycrystalline film deposited at 150℃ exhibits a lowest resistivity of 7.7 × 10^-4Ω·cm with the highest carrier density of 1.1×10^21 cm^-3 and the Hall mobility of 7.4 cm^2·V^-1s^-1.
文摘Electrical properties of C/Ni films are studied using four mosaic targets made of pure graphite and stripes of nickel with the surface areas of 1.78,3.21,3.92 and 4.64%.The conductivity data in the temperature range of400-500 K shows the extended state conduction.The conductivity data in the temperature range of 150-300 K shows the multi-phonon hopping conduction.The Berthelot-type conduction dominates in the temperature range of 50-150 K.The conductivity of the films in the temperature range about 〈 50 K is described in terms of variable-range hopping conduction.In low temperatures,the localized density of state around Fermi level（F）for the film deposition with 3.92% nickel has a maximum value of about 56.2×10^（17）cm^（-3）eV^（-1） with the minimum average hopping distance of about 3.43 × 10^（-6） cm.
文摘CdSe films are of great interest for use in thin film photoelectric devices. A simple chemical precipitation method is adopted for the first time to synthesise CdSe powder. Films on glass obtained at different substrate temperatures TS such as 300, 373, 423 and 473 K have been characterised by X-ray diffraction, optical absorption and Hall measurements.
