Mulching can effectively maintain soil moisture;color of mulching film affects soil water storage capacity and further promote crop growth to improve grain yield.Field experiment was conducted to study effects of diff...Mulching can effectively maintain soil moisture;color of mulching film affects soil water storage capacity and further promote crop growth to improve grain yield.Field experiment was conducted to study effects of different film colors on dry matter accumulation(DMA)and grain yield of oil flax.Results showed that white plastic film mulching could increase leaf area,chlorophyll content and DMA.DMA of white film mulching and micro-ridge with soil covering was 53.0%higher than that of CK,and 7.8%higher than that of black film mulching.Mulching method also influenced DMA.Micro-ridge alone increased it by 13.7%than flat cultivation and soil covering improved another 7.6%under white film mulching.Both white and black film mulching with microridge could significantly improve grain yield.Black film mulching with micro-ridge and soil covering,white film mulching with micro-ridge and no soil covering significantly increased capsule number per plant,1,000-grain weight and grain yield of oil flax,compared with CK.Grain yield increased 29.0%and 28.9%respectively.These results indicated that the above mulching methods were suitable for high yield cropping pattern in dry-farming regions.展开更多
Silver is an elegant white precious metal,but it is easily oxidized by O3,SO2,and H2S in the air,turning yellow or dark,which affects its decorative effect.The existing silver coating,primarily prepared through the el...Silver is an elegant white precious metal,but it is easily oxidized by O3,SO2,and H2S in the air,turning yellow or dark,which affects its decorative effect.The existing silver coating,primarily prepared through the electroplating process,poses serious environmental pollution problems.It is necessary to seek new,green,and environmentally friendly coating processes while also enhancing the color palette of silver jewelry coatings.Titanium film layers were deposited on Ag925 and Ag999 surfaces using magnetron sputtering coating technology.The effects of sputtering time,substrate surface state,reaction gas type and time,and film thickness on the color of the film layers were studied,and the anti discoloration performance of the obtained film layers under the optimal process was tested.The experimental results show that when the sputtering time varies from 5 to 10 minutes,injecting argon,oxygen,and nitrogen into the coating chamber yields rich colors such as purple with a red tint,blue,yellow green,yellowish purple,and blue purple.The precise control of gas injection time has a significant impact on the color of the film layer.In terms of anti tarnish performance,the film showed good stability in the artificial sweat immersion test.From an environmental perspective,the magnetron sputtering titanium film process has no harmful gas or liquid emissions,which aligns with the sustainable development trend of the jewelry industry and holds great promise for application.This study has improved the visual effect and practical performance of the product,providing important theoretical basis and experimental data support for the application of environmentally friendly silver surface vacuum magnetron sputtering titanium thin film coating technology.展开更多
Dye-based color films are increasingly considered as viable alternatives to pigment-based color films in complementary metal-oxide-semiconductor(CMOS) image sensors.Herein,a series of azo dyes utilizing 5-methyl-2-phe...Dye-based color films are increasingly considered as viable alternatives to pigment-based color films in complementary metal-oxide-semiconductor(CMOS) image sensors.Herein,a series of azo dyes utilizing 5-methyl-2-phenyl-4-(2-phenylhydrazono)-2,4-dihydro-3H-pyrazol-3-one as the coupling component and aromatic amines with various electron-withdrawing groups(NO_(2),CN,Br) as diazo components were designed and synthesized.The presence of intermolecular hydrogen bonding between the hydrogen atom on the N-H group and the oxygen atom of the C=O group of the hydrazo structure facilitates the formation of a stable six-membered ring.Additionally,the electron-withdrawing groups in the diazo component further stabilize this hydrogen-bonded structure.As a result,these azo dyes(P-2,P-3,P-4,P-5)exhibit not only excellent light stability but also ultra-highly thermal stability(T_(d)> 260℃).Therein,the synthesized dyes P-2 and P-3 with great bright yellow color(~400 nm),proper solubility(~6.00g/100 g)were selected to make for color films.And their dye-based color films displayed ultra-highly thermal and light stability(color difference ΔE<3).Notably,the increased planarity of the molecular structure by hydrogen bonding for the novel dyes ensures a balance between high transmittance(>90%) in the 550-780 nm wavelength range and the solvent resistance of the dye-based color films.This work contributes to the advancement of next-generation smart CMOS devices and offers valuable insights into the design of azo dyes for applications in the field of organic electronics.展开更多
Preparation and photo-patterning characteristics of organic-inorganic hybrid thin film containing latent pigment by using photo-acid-generator (PAG) and microwave irradiation have been investigated. The acrylic thin f...Preparation and photo-patterning characteristics of organic-inorganic hybrid thin film containing latent pigment by using photo-acid-generator (PAG) and microwave irradiation have been investigated. The acrylic thin film modified with methoxysilane containing PAG was formed on a glass substrate and irradiated with ultraviolet rays to promote sol-gel reaction by catalytic action of acid which was generated from PAG. And then the film was hardened with microwave irradiation, yielding organic-inorganic hybrid polymer film having hardness, highly transparency and strong adhesion with a glass substrate. Since this reaction only occurred in the optically (UV) irradiated regions, by exploiting the difference between the adhesivenesses of these regions photo-irradiated through photomask with a glass substrate, it was possible to form a patterned film with pitch of 100 to 50 μm by a simple lift-off method. A pigment-containing film using latent pigments (with subtractive three primary colors of coloring materials) and a patterned film were prepared, and it was possible to make these films multi-colored by varying the mixing ratio of the pigments. This multi-colored film-preparation method is effective for simply and efficiently forming a color-filter film by applying optical and microwave irradiation.展开更多
The effects of antimicrobial edible films containing carvacrol and cinnamaldehyde on organic baby spinach were determined via sensory analysis and changes in physical properties. Edible films made from pulp of hibiscu...The effects of antimicrobial edible films containing carvacrol and cinnamaldehyde on organic baby spinach were determined via sensory analysis and changes in physical properties. Edible films made from pulp of hibiscus, apple, or carrot containing carvacrol or cinnamaldehyde at 0.5%, 1.5%, or 3% concentrations were added to organic baby spinach in plastic bags. These bags were stored at 4<span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#ffffff;"="">°</span>C for 20-24h before performing sensory evaluation and measuring changes in physical properties. A randomized block design with an affective test was used. Preference liking was evaluated based on a 9-point hedonic scale for aroma, color, freshness, mouthfeel, flavor, and overall acceptability. Additionally, panelists quantified each sample using a 5-point hedonic scale for pungency, browning, bitterness, off-odor, and sourness. The color and texture of spinach samples were measured. Edible films containing cinnamaldehyde had the highest preference liking based on aroma, color, freshness, mouthfeel, flavor, and overall acceptability than those containing carvacrol and were the most likely to be purchased by panelists;therefore, cinnamaldehyde can potentially be used as an alternative sanitization option. There were no significant (p ≤ 0.05) changes in firmness or color values between spinach treated with antimicrobial films and controls. The results provide the produce industry with options for incorporating antimicrobial films into salad bags without influencing the physical or sensory properties of baby spinach.展开更多
Mini LED背光显示产品使用光学扩散板和复合膜进行亮度提升和均匀性提升,光学膜将大幅改变背光的色坐标和亮度参数。本文测试结果表明,复合膜亮度增益在1.5~2倍,亮度增益排序为POP>DPP>MOP>DOP。经分析这是由于不同复合膜对光...Mini LED背光显示产品使用光学扩散板和复合膜进行亮度提升和均匀性提升,光学膜将大幅改变背光的色坐标和亮度参数。本文测试结果表明,复合膜亮度增益在1.5~2倍,亮度增益排序为POP>DPP>MOP>DOP。经分析这是由于不同复合膜对光束立体角的矫正作用引起,即光学微结构对杂散光收集能量大于扩散剂散射产生的能量耗损。同时复合膜大幅提高了背光色坐标,其中扩散板+DPP色坐标变化Δx为0.01,Δy为0.0187,这是由于扩散粒子的Mie散射使短波段蓝光的光辐射能大幅耗损。对于量子点显示,从多层光学微结构反射回量子膜的蓝光将产生多重光致激发现象,使复合膜对xy色坐标值的增幅进一步加大。光学复合膜产生的亮度增益和色温降低有利于显示产品在出厂时将色温调到低色温从而保证显示亮度。展开更多
基金financial supports provided by the National Natural Science Programs of China(31360315,31760363)the China Agriculture Research System of Construct Special(CARS-14-1-16)the Fuxi Outstanding Talent Cultivation Plan of Gansu Agricultural University(Gaufx-02J05)。
文摘Mulching can effectively maintain soil moisture;color of mulching film affects soil water storage capacity and further promote crop growth to improve grain yield.Field experiment was conducted to study effects of different film colors on dry matter accumulation(DMA)and grain yield of oil flax.Results showed that white plastic film mulching could increase leaf area,chlorophyll content and DMA.DMA of white film mulching and micro-ridge with soil covering was 53.0%higher than that of CK,and 7.8%higher than that of black film mulching.Mulching method also influenced DMA.Micro-ridge alone increased it by 13.7%than flat cultivation and soil covering improved another 7.6%under white film mulching.Both white and black film mulching with microridge could significantly improve grain yield.Black film mulching with micro-ridge and soil covering,white film mulching with micro-ridge and no soil covering significantly increased capsule number per plant,1,000-grain weight and grain yield of oil flax,compared with CK.Grain yield increased 29.0%and 28.9%respectively.These results indicated that the above mulching methods were suitable for high yield cropping pattern in dry-farming regions.
文摘Silver is an elegant white precious metal,but it is easily oxidized by O3,SO2,and H2S in the air,turning yellow or dark,which affects its decorative effect.The existing silver coating,primarily prepared through the electroplating process,poses serious environmental pollution problems.It is necessary to seek new,green,and environmentally friendly coating processes while also enhancing the color palette of silver jewelry coatings.Titanium film layers were deposited on Ag925 and Ag999 surfaces using magnetron sputtering coating technology.The effects of sputtering time,substrate surface state,reaction gas type and time,and film thickness on the color of the film layers were studied,and the anti discoloration performance of the obtained film layers under the optimal process was tested.The experimental results show that when the sputtering time varies from 5 to 10 minutes,injecting argon,oxygen,and nitrogen into the coating chamber yields rich colors such as purple with a red tint,blue,yellow green,yellowish purple,and blue purple.The precise control of gas injection time has a significant impact on the color of the film layer.In terms of anti tarnish performance,the film showed good stability in the artificial sweat immersion test.From an environmental perspective,the magnetron sputtering titanium film process has no harmful gas or liquid emissions,which aligns with the sustainable development trend of the jewelry industry and holds great promise for application.This study has improved the visual effect and practical performance of the product,providing important theoretical basis and experimental data support for the application of environmentally friendly silver surface vacuum magnetron sputtering titanium thin film coating technology.
基金supported by the Program of the National Natural Science Foundation of China(No.22238002)the Fundamental Research Funds for the Central Universities(No.DUT22LAB610)+1 种基金Research and Innovation Team Project of Dalian University of Technology(No.DUT2022TB10)China Postdoctoral Science Foundation(No.2022M720639)。
文摘Dye-based color films are increasingly considered as viable alternatives to pigment-based color films in complementary metal-oxide-semiconductor(CMOS) image sensors.Herein,a series of azo dyes utilizing 5-methyl-2-phenyl-4-(2-phenylhydrazono)-2,4-dihydro-3H-pyrazol-3-one as the coupling component and aromatic amines with various electron-withdrawing groups(NO_(2),CN,Br) as diazo components were designed and synthesized.The presence of intermolecular hydrogen bonding between the hydrogen atom on the N-H group and the oxygen atom of the C=O group of the hydrazo structure facilitates the formation of a stable six-membered ring.Additionally,the electron-withdrawing groups in the diazo component further stabilize this hydrogen-bonded structure.As a result,these azo dyes(P-2,P-3,P-4,P-5)exhibit not only excellent light stability but also ultra-highly thermal stability(T_(d)> 260℃).Therein,the synthesized dyes P-2 and P-3 with great bright yellow color(~400 nm),proper solubility(~6.00g/100 g)were selected to make for color films.And their dye-based color films displayed ultra-highly thermal and light stability(color difference ΔE<3).Notably,the increased planarity of the molecular structure by hydrogen bonding for the novel dyes ensures a balance between high transmittance(>90%) in the 550-780 nm wavelength range and the solvent resistance of the dye-based color films.This work contributes to the advancement of next-generation smart CMOS devices and offers valuable insights into the design of azo dyes for applications in the field of organic electronics.
文摘Preparation and photo-patterning characteristics of organic-inorganic hybrid thin film containing latent pigment by using photo-acid-generator (PAG) and microwave irradiation have been investigated. The acrylic thin film modified with methoxysilane containing PAG was formed on a glass substrate and irradiated with ultraviolet rays to promote sol-gel reaction by catalytic action of acid which was generated from PAG. And then the film was hardened with microwave irradiation, yielding organic-inorganic hybrid polymer film having hardness, highly transparency and strong adhesion with a glass substrate. Since this reaction only occurred in the optically (UV) irradiated regions, by exploiting the difference between the adhesivenesses of these regions photo-irradiated through photomask with a glass substrate, it was possible to form a patterned film with pitch of 100 to 50 μm by a simple lift-off method. A pigment-containing film using latent pigments (with subtractive three primary colors of coloring materials) and a patterned film were prepared, and it was possible to make these films multi-colored by varying the mixing ratio of the pigments. This multi-colored film-preparation method is effective for simply and efficiently forming a color-filter film by applying optical and microwave irradiation.
文摘The effects of antimicrobial edible films containing carvacrol and cinnamaldehyde on organic baby spinach were determined via sensory analysis and changes in physical properties. Edible films made from pulp of hibiscus, apple, or carrot containing carvacrol or cinnamaldehyde at 0.5%, 1.5%, or 3% concentrations were added to organic baby spinach in plastic bags. These bags were stored at 4<span style="color:#4F4F4F;font-family:-apple-system, " font-size:16px;white-space:normal;background-color:#ffffff;"="">°</span>C for 20-24h before performing sensory evaluation and measuring changes in physical properties. A randomized block design with an affective test was used. Preference liking was evaluated based on a 9-point hedonic scale for aroma, color, freshness, mouthfeel, flavor, and overall acceptability. Additionally, panelists quantified each sample using a 5-point hedonic scale for pungency, browning, bitterness, off-odor, and sourness. The color and texture of spinach samples were measured. Edible films containing cinnamaldehyde had the highest preference liking based on aroma, color, freshness, mouthfeel, flavor, and overall acceptability than those containing carvacrol and were the most likely to be purchased by panelists;therefore, cinnamaldehyde can potentially be used as an alternative sanitization option. There were no significant (p ≤ 0.05) changes in firmness or color values between spinach treated with antimicrobial films and controls. The results provide the produce industry with options for incorporating antimicrobial films into salad bags without influencing the physical or sensory properties of baby spinach.
