The use of antifouling agents is suggested to be a promising method for protecting oceanic instruments from biological contamination.We developed a novel antifouling material doped with capsaicin(CAP)as a filler and m...The use of antifouling agents is suggested to be a promising method for protecting oceanic instruments from biological contamination.We developed a novel antifouling material doped with capsaicin(CAP)as a filler and montmorillonite(MMT)as a carrier for the practical application of CTD(conductivity,temperature,depth)protection.The optimal parameters for preparing the material were established,and the obtained material achieved the maximum CAP loading capacity of 32.74%.The proposed material exhibited great release properties in acidic environments,which is beneficial for reducing bacterial attachment.Furthermore,the optimal conditions(temperature,flow rate,and pressure in the aquatic environment)for a better release rate of the material were determined through a series of simulation tests in lab.It provided good guidance and basis for practical application of the material.The CAP@MMT composite showed excellent efficiency and effectiveness in preventing the attachment of microorganisms during the four-month marine field tests.In the subsequent experiments,the great properties of the antifouling material were further confirmed by retesting the conductivity of four instruments participating in marine field tests.The measuring errors of CTD protected by the antifouling material are both within 0.01 mS/cm,which is far lower than that of the other two instruments.展开更多
The characteristics of residual soils are very different from those of sedimentary soils.Although the strength characteristics of sedimentary soils have been studied extensively,the shear strength characteristics of g...The characteristics of residual soils are very different from those of sedimentary soils.Although the strength characteristics of sedimentary soils have been studied extensively,the shear strength characteristics of granitic residual soils(GRS)subjected to the weathering of parent rocks have rarely been investigated.In this study,the shear strength characteristics of GRS in the Taishan area of southeast China(TSGRS)were studied by field and laboratory tests.The field tests consisted of a cone penetration test(CPT),borehole shear test(BST),self-boring pressuremeter test(SBPT),and seismic dilatometer Marchetti test(SDMT).The shortcomings of laboratory testing are obvious,with potential disturbances arising through the sampling,transportation,and preparation of soil samples.Due to the special structure of GRS samples and the ease of disturbance,the results obtained from laboratory tests were generally lower than those obtained from situ tests.The CPT and scanning electron microscopy(SEM)results indicated significant weathering and crustal hardening in the shallow TSGRS.This resulted in significant differences in the strength and strength parameters of shallow soil obtained by the BST.Based on the SDMT and SBPT results,a comprehensive evaluation method of shear strength for TSGRS was proposed.The SBPT was suitable for evaluating the strength of shallow GRS.The material index(ID)and horizontal stress index(KD)values obtained by the SDMT satisfied the empirical relationship proposed by Marchetti based on the ID index,and were therefore considered suitable for the evaluation of the shear strength of deep GRS.展开更多
The strong wind characteristics of the Runyang Suspension Bridge（ RSB） including the wind speed and direction, the turbulence intensity, the turbulence integral length and power spectrum are analyzed based on measur...The strong wind characteristics of the Runyang Suspension Bridge（ RSB） including the wind speed and direction, the turbulence intensity, the turbulence integral length and power spectrum are analyzed based on measurement data from the wind environment monitoring subsystem of the structural health monitoring system （SHMS）of the RSB and field tests during strong winds. The differences between the typhoon and the strong northern wind are especially studied. It is found that the mean wind speed of the strong northern wind is a little smaller and the mean wind direction is more stable than that of the typhoon. The turbulence intensity of both the typhoon and the strong northern wind is greater than the values suggested in Chinese code, and the turbulence integral length difference between the typhoon and a strong northern wind is not clear. As for the along-wind turbulence power spectrum, the spectrum of the strong northern wind can fit the Kaimal spectrum better than that of the typhoon. The obtained results can provide measurement data for founding a strong wind characteristic database and determining the strong wind characteristic parameter values of the RSB.展开更多
[ Objective] The aim of this study was to evaluate the clinical effect of the inactivated vaccine in oil emulsion against Newcastle disease and Fowl cholera, and provide conditions for combined prevention and control ...[ Objective] The aim of this study was to evaluate the clinical effect of the inactivated vaccine in oil emulsion against Newcastle disease and Fowl cholera, and provide conditions for combined prevention and control of Newcastle disease and Fowl cholera. [ Method] The mixture of avian pasteurella multocida （type A） virulent strain 1502 and Newcastle disease virus attenuated strain La Sota was prepared into five batches of the inactivated vaccine in oil emulsion to use in the field test for assessing its safety and effects on immune protection of chicken, duck and goose. [ Result] The field safety test showed that there was no adverse reaction in the vaccinated chickens, ducks and geese. The field test of immune effect for chickens suggested that the titers of hemagglutination inhibition antibody for Nescastle disease virus （ ND-HI ） in 7 - 14 day- old chickens and 60 -90 day-old young chickens were 2 -3 log2 higher than the control group after being vaccinated for 3 weeks, which could last for more than 4 months. The protection rate against avian pasteurella multocida was over 75.0% and its immune effect could last for 6 months. The field test of immune effect for duck and goose indicated that the titers of ND-HI antibody were all higher than 4.2 log2 in vaccinated ducks and geese while lower than 2 log2 in the control group after being vaccinated for 3 weeks. The protection rate against avian pasteurella multocida in vaccinated ducks and geese was higher than 75.0% and 62.5% respectively. [ Conclusion] The binary vaccine is safe for poultry and has good immune effects.展开更多
In order to study the mechanical performance of a new type of cable-stayed beam-arch combination bridge, the results of field static and dynamic load tests are comparatively analyzed with numerical results based on th...In order to study the mechanical performance of a new type of cable-stayed beam-arch combination bridge, the results of field static and dynamic load tests are comparatively analyzed with numerical results based on the Jingyi bridge straddling the Daxi River in Yixing. First, the test scheme, tasks, the corresponding measure method, as well as the relevant codes are described. Secondly, two sets of three- dimensional finite element models are established. One is Ansys which uses the solid element and the other is Midas which adopts the beam element. Finally, the experimental and analytical results are comparatively analyzed, and they show an agreement with each other. The results show that the bridge possesses adequate load-carrying capacity under all static load cases, but the capacity of dissipating external input energy is insufficient due to the relatively smaller damping ratio. The study results can provide a reference for further study and optimization of this type of bridge. Calibrated finite-element models that reflect the real conditions can be used as a baseline for future maintenance of the bridge.展开更多
Several methods of mixed programming with LabVIEW and Matlab are introduced.Taking explosin test as application background,the design method and implementation process using MathScript node and COM technology are main...Several methods of mixed programming with LabVIEW and Matlab are introduced.Taking explosin test as application background,the design method and implementation process using MathScript node and COM technology are mainly discussed.Based on this,the advantages of LabVIEW＇s interface development and Matlab＇s rich data operation functions are combined to achieve the fitting of explosion pressure field and dynamic compensation of temperature measured.展开更多
Construction of seaside and underground wall bracing often uses stiffened deep cement mixed columns （SDCM）. This research investigates methods used to improve the level of bearing capacity of these SDCM when subject...Construction of seaside and underground wall bracing often uses stiffened deep cement mixed columns （SDCM）. This research investigates methods used to improve the level of bearing capacity of these SDCM when subjected to cyclic lateral loading via various types of stiffer cores. Eight piles, two deep cement mixed piles and six stiffened deep cement mixing piles with three different types of cores, H shape cross section prestressed concrete, steel pipe, and H-beam steel, were embedded though soft clay into medium-hard clay on site in Thailand. Cyclic horizontal loading was gradually applied until pile failure and the hysteresis loops of lateral load vs. lateral deformation were recorded. The lateral carrying capacities of the SDCM piles with an H-beam steel core increased by 3-4 times that of the DCM piles. This field research clearly shows that using H-beam steel as a stiffer core for SDCM piles is the best method to improve its lateral carrying capacity, ductility and energy dissipation capacity.展开更多
A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characteriz...A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.展开更多
Field measurement of strong wind characteristics is of great significance for the development of bridge wind engineering. Located in east China, the Runyang Suspension Bridge (RSB) with a main span of 1490 m is the lo...Field measurement of strong wind characteristics is of great significance for the development of bridge wind engineering. Located in east China, the Runyang Suspension Bridge (RSB) with a main span of 1490 m is the longest bridge in China and the third longest in the world. During the last four years, the RSB has suffered from typhoons and strong northern winds on more than ten occasions. To determine the strong wind characteristics of the RSB, wind measurement data obtained from field tests during strong winds and data from the wind environment monitoring subsystem of the structural health monitoring system (SHMS) of the RSB were combined to analyze the wind speed and direction, variation in wind speed with height, turbulence intensity, turbulence integral length, wind friction speed and the power spectrum. Comparative studies on the characteristics of these different strong winds were carried out based on the current wind-resistant design specification for highway bridges. Results showed that some regularity in wind characteristics can be found in these different typhoons passing through the RSB. The difference between a strong northern wind and a typhoon is relatively clear, and in summer the typhoon is the dominant wind load acting on the RSB. In addition, there were some differences between the measured strong wind characteristics and the values suggested by the specification, especially in respect to turbulence intensity and turbulence integral length. Results provide measurement data for establishing a strong wind characteristic database for the RSB and for determining the strong wind characteristic parameter values of this coastal area in east China.展开更多
Nucleic acids in plant tissue lysates can be captured quickly by a cellulose filter paper and prepared for amplification after a quick purification.In this study,a published filter paper strip method was modified by s...Nucleic acids in plant tissue lysates can be captured quickly by a cellulose filter paper and prepared for amplification after a quick purification.In this study,a published filter paper strip method was modified by sticking the filter paper on a polyvinyl chloride resin(PVC)sheet.This modified method is named EZ-D,for EASY DNA extraction.Compared with the original cetyl trimethylammonium bromide(CTAB)method,DNA extracted by EZ-D is more efficient in polymerase chain reaction(PCR)amplification due to the more stable performance of the EZ-D stick.The EZ-D method is also faster,easier,and cheaper.PCR analyses showed that DNA extracted from several types of plant tissues by EZ-D was appropriate for specific identification of biological samples.A regular PCR reaction can detect the EZ-D-extracted DNA template at concentration as low as 0.1 ng/μL.Evaluation of the EZ-D showed that DNA extracts could be successfully amplified by PCR reaction for DNA fragments up to 3000 bp in length and up to 80%in GC content.EZ-D was successfully used for DNA extraction from a variety of plant species and plant tissues.Moreover,when EZ-D was combined with the loop-mediated isothermal amplification(LAMP)method,DNA identification of biological samples could be achieved without the need for specialized equipment.As an optimized DNA purification method,EZ-D shows great advantages in application and can be used widely in laboratories where equipment is limited and rapid results are required.展开更多
Large-scale field shear tests on ten specimens of the red-sandstone embankment at a highway in Hunan,China,were performed to examine mechanical characteristics and parameters of red-sandstone.The curves of thrust-disp...Large-scale field shear tests on ten specimens of the red-sandstone embankment at a highway in Hunan,China,were performed to examine mechanical characteristics and parameters of red-sandstone.The curves of thrust-displacement,failure mode,and shear strength parameters for red-sandstone with different water contents,different compactions,and different grain size distributions were obtained from the tests.A practical procedure of in-situ test for red-sandstone embankment was proposed to normalize the test equipment and test steps.Based on three-dimensional thrust-sliding limit equilibrium method,the formulas for calculating strength parameters of red-sandstone considering three-dimensional sliding surface were inferred.The results show that red-sandstone has typical complete curves of stress-strain,strain softening,which are caused by the special structure of red-sandstone;water content and compaction are important factors for strength and failure mode of red-sandstone;The average value of cohesion and internal friction angle of the specimens calculated by three-dimensional technique are 21.56 kPa and 29.29°,respectively,and those by traditional two-dimensional method are 25.52 kPa and 33.76°,respectively.展开更多
A real case of a steel lattice shell suffering a fire was studied. Based on the theory of field modeling, fire dynamic simulator (FDS) was used to identify the temperature field. The damage mechanism of the structure ...A real case of a steel lattice shell suffering a fire was studied. Based on the theory of field modeling, fire dynamic simulator (FDS) was used to identify the temperature field. The damage mechanism of the structure was determined by FEM analysis. After damage assessment, the shell was repaired with the pipe-encasement method. Finally, field test was employed to check the capacity of the structure after repair. The numerical study results indicate that the damage assessment agrees well with field inspection, verifying the accuracy of fire numerical simulation and FEM analysis. The field test results prove that the pipe-encasement method is secure and reasonable, and the repaired shell is safe.展开更多
A novel expandable conductor was designed and applied in deep-water drilling to improve the vertical and lateral bearing capacity with a significant reduction of conductor jetting depth and soaking time. The vertical ...A novel expandable conductor was designed and applied in deep-water drilling to improve the vertical and lateral bearing capacity with a significant reduction of conductor jetting depth and soaking time. The vertical and lateral bearing capability of expandable conductors was depicted based on the ultimate subgrade reaction method and pile foundation bearing theory. The load-bearing characteristics of a laboratory-scale expandable conductor were analyzed through laboratory experiments. The serial simulation experiments are accomplished to study the bearing characteristics(vertical ultimate bearing capacity, lateral soil pressure, and lateral displacement) during the conductor soaking process. The laboratory experimental results show that the larger the length and thickness of expandable materials are,the higher the bearing capacity of the wellhead will be. During the conductor soaking process, the soil pressure around the three expandable conductors increases faster, strings representing a stronger squeezing effect and resulting in higher vertical bearing capacity. Furthermore, the lateral displacement of novel expandable conductor is smaller than that of the conventional conductor. All the advantages mentioned above contributed to the reduction of conductor’s jetting depth and soaking time. Lastly, the application workflow of a novel expandable deep-water drilling conductor was established and the autonomous expandable conductor was successfully applied in the South China Sea with a significant reduction of conductor’s jetting depth and soaking time. According to the soil properties and designed installation depth of the surface conductor, the arrangement of expandable materials should be designed reasonably to meet the safety condition and reduce the construction cost of the subsea wellhead.展开更多
The operational experience of a horizontal segment well within the hard brittle shale layer of Longmaxi Formation in the southern Sichuan area demonstrates that the high-density oil-based drillingfluid(HDOF)induced do...The operational experience of a horizontal segment well within the hard brittle shale layer of Longmaxi Formation in the southern Sichuan area demonstrates that the high-density oil-based drillingfluid(HDOF)induced down-hole working conditions(high-temperature,high-pressure,and solid-phase-dominance)directly impact the stability of the wellbore wall.Focusing on the impact of bottom-hole osmotic pressure and solid phase content and a series of density-reductionfield tests,we identified suitable countermeasures.In this paper,we discuss the impact of high osmotic pressure and operational measures,and provide details of thefield tests,which indicate that maintaining a higher osmotic pressure at the bottom-hole can reduce the formation pore pressure of the bottom-hole,widen thefluid density window,and maintain the stability of the wellbore wall.By improving the HDOF formula,such as using new treatment agents(e.g.,polymer-modified nano-sealing agent and ultra-micro barite weight additive)and optimizing the solid particle size distribution of HDOF,we can effectively address the down-hole problems.Thefield test of“pressure-controlled drillingþdensity reduction”in horizontal drilling operations was found to reduce the complexity of down-hole faults,improve the rate of penetration,and reduce overall costs.展开更多
Factors directly affecting the extraction rate of the piles pulled out by a vibratory pulling system are summarized and classified into five categories(excitation force,resistance,vibration amplitude,pile plumbness ke...Factors directly affecting the extraction rate of the piles pulled out by a vibratory pulling system are summarized and classified into five categories(excitation force,resistance,vibration amplitude,pile plumbness keeping,and slowing down at the later stage) from the mechanics and engineering practice.Field tests on steel sheet piles extracted by vibratory technique in different soil conditions are conducted to ascertain how these factors affect the extraction rate of a pile with regard to three major actors of vibratory pile pulling:the pile to be extracted,the selected pulling system,and the imposed soil conditions.The extraction rates of three different sheet pile types(having up to four different lengths) pulled out by two different vibratory pulling systems are documented.The piles with different lengths and types,pulled out with or without a clutch,have different extraction rates.The working parameters governing the vibratory hammer,such as excitation force and vibration amplitude,exert significant influences on the rate of pile extraction,especially in the early stages of up-lift process.The extraction rate of the piles driven in different soil conditions is uniform because different extraction resistances mainly refer to shaft friction.The properties of the pile-soil interface influence the extraction rate of the piles,and the extraction rate decreases with the time for which the piles have been buried in the earth.展开更多
Low voltage ride through (LVRT) capability has become more and more an issue for newly integrated wind turbines. The LVRT programs described in this paper developed field tests for newly installed wind turbines on win...Low voltage ride through (LVRT) capability has become more and more an issue for newly integrated wind turbines. The LVRT programs described in this paper developed field tests for newly installed wind turbines on wind farms in Northeast China. It is therefore different from other papers that only validate LVRT control strategies through running computer software simulations. To examine a single wind turbine's LVRT capability, the wind turbine's terminal voltage dip was realized by using a grid voltage dip emulator, which was located on the 690 V side of the generator transformer. In this paper, by artificially making various grid faults, the dynamic behavior of DFIG and PMSG wind turbines are analyzed and compared, control strategies such as active/passive crowbar and chopper protection schemes are verified, and new active/reactive power compensation methods are investigated and compared.展开更多
The impermeability of concrete of the exterior wall of the underground tunnel in water-rich stratum is a key concern of engineers.Taking the Aixihu highway tunnel in Nanchang city as an example,the impermeability of t...The impermeability of concrete of the exterior wall of the underground tunnel in water-rich stratum is a key concern of engineers.Taking the Aixihu highway tunnel in Nanchang city as an example,the impermeability of the concrete in the side wall of the highway tunnel is tested,through multiple tests,such as the embedded steel pipe,water injection,and field observation.The results show that,under the action of 2mpa of water pressure,no water flow permeates from the side wall of the concrete tunnel,indicating that the impermeable performance of concrete tunnel in this section meets the engineering requirements,and hoping that this research can be used as a reference for other similar projects.展开更多
Horizontal shale gas well fracturing is mostly carried out by pumping bridge plugs.In the case of casing deformation,the bridge plug can not be pumped down to the designated position,so the hole sections below the def...Horizontal shale gas well fracturing is mostly carried out by pumping bridge plugs.In the case of casing deformation,the bridge plug can not be pumped down to the designated position,so the hole sections below the deformation could not be stimulated according to the design program.About 30%of horizontal shale gas wells in the Changning and Weiyuan Blocks,Sichuan Basin,suffer various casing deformation after fracturing.Previously,the hole sections which could not be stimulated due to casing deformation were generally abandoned.As a result,the resources controlled by shale gas wells weren't exploited effectively and the fracturing effect was impacted greatly.There are a lot of difficulties in investigating casing deformation,such as complex mechanisms,various influencing factors and unpredictable deformation time.Therefore,it is especially important to seek a staged fracturing technology suitable for the casing deformation sections.In this paper,the staged fracturing technology with sand plugs inside fractures and the staged fracturing technology with temporary plugging balls were tested in casing deformation wells.The staged fracturing technology with sand plugs inside fractures was carried out in the mode of single-stage perforation and single-stage fracturing.The staged fracturing technology with temporary plugging balls was conducted in the mode of single perforation,continuous fracturing and staged ball dropping.Then,two kinds of technologies were compared in terms of their advantages and disadvantages.Finally,they were tested on site.According to the pressure response,the pressure monitoring of the adjacent wells and the microseismic monitoring in the process of actual fracturing,both technologies are effective in the stimulation of the casing deformation sections,realizing well control reserves efficiently and guaranteeing fracturing effects.展开更多
Aimed at the current treatment status of the polymer-flooding wastewater in Bohai oilfield, electrochemical technology used for polymer-degradation and oil-removal was researched. It formed the process flow of cyclone...Aimed at the current treatment status of the polymer-flooding wastewater in Bohai oilfield, electrochemical technology used for polymer-degradation and oil-removal was researched. It formed the process flow of cyclone mixed dosing → electrochemical removal oil → inclined tube removal oil → walnut shell filter, and a set of skid mounted wastewater containing polymer treatment plant was designed and manufactured, which was used for the field test of electrochemical treatment of wastewater containing polymer in offshore oilfield. The result shows that the oil removal rate of the electrochemical treatment process is over 98%, and the synergistic effect is significant especially used in conjunction with water clarifier of BHQ-04. When the amount of water clarifier is 50 - 150 mg/L, the oil content, the median particle diameter and the suspended solids content of the filtered water is 8 - 18 mg/L, 1.9 - 2.26 μm and 1.39 - 2.04 mg/L respectively, which reach the scene water quality standards for water injection.展开更多
基金supported by the directional Foundation of the Key Laboratory of Ocean Observation Technology,MNR(No.2021KlootB06)the National Natural Science Foundation of China(No.52271341)。
文摘The use of antifouling agents is suggested to be a promising method for protecting oceanic instruments from biological contamination.We developed a novel antifouling material doped with capsaicin(CAP)as a filler and montmorillonite(MMT)as a carrier for the practical application of CTD(conductivity,temperature,depth)protection.The optimal parameters for preparing the material were established,and the obtained material achieved the maximum CAP loading capacity of 32.74%.The proposed material exhibited great release properties in acidic environments,which is beneficial for reducing bacterial attachment.Furthermore,the optimal conditions(temperature,flow rate,and pressure in the aquatic environment)for a better release rate of the material were determined through a series of simulation tests in lab.It provided good guidance and basis for practical application of the material.The CAP@MMT composite showed excellent efficiency and effectiveness in preventing the attachment of microorganisms during the four-month marine field tests.In the subsequent experiments,the great properties of the antifouling material were further confirmed by retesting the conductivity of four instruments participating in marine field tests.The measuring errors of CTD protected by the antifouling material are both within 0.01 mS/cm,which is far lower than that of the other two instruments.
基金the funding support from the National Natural Science Foundation of China(Grant No.51709290)the Key Scientific Research Project of colleges and universities in Henan Province-Special Project of Basic Research(Grant No.20zx009)the Key Research Projects of Higher Education Institutions in Henan Province(Grant No.22A580008).
文摘The characteristics of residual soils are very different from those of sedimentary soils.Although the strength characteristics of sedimentary soils have been studied extensively,the shear strength characteristics of granitic residual soils(GRS)subjected to the weathering of parent rocks have rarely been investigated.In this study,the shear strength characteristics of GRS in the Taishan area of southeast China(TSGRS)were studied by field and laboratory tests.The field tests consisted of a cone penetration test(CPT),borehole shear test(BST),self-boring pressuremeter test(SBPT),and seismic dilatometer Marchetti test(SDMT).The shortcomings of laboratory testing are obvious,with potential disturbances arising through the sampling,transportation,and preparation of soil samples.Due to the special structure of GRS samples and the ease of disturbance,the results obtained from laboratory tests were generally lower than those obtained from situ tests.The CPT and scanning electron microscopy(SEM)results indicated significant weathering and crustal hardening in the shallow TSGRS.This resulted in significant differences in the strength and strength parameters of shallow soil obtained by the BST.Based on the SDMT and SBPT results,a comprehensive evaluation method of shear strength for TSGRS was proposed.The SBPT was suitable for evaluating the strength of shallow GRS.The material index(ID)and horizontal stress index(KD)values obtained by the SDMT satisfied the empirical relationship proposed by Marchetti based on the ID index,and were therefore considered suitable for the evaluation of the shear strength of deep GRS.
基金The National High Technology Research and Development Program of China (863Program) (No.2006AA04Z416)the Key Project of the National Natural Science Foundation of China(No.50538020)+2 种基金the National Science Fund for Distinguished Young Scholars(No.50725828)the National Natural Science Foundation of China for Young Scholars(No.50608017)the Ph.D. Programs Foundation of Ministry of Education of China (No.200802861012)
文摘The strong wind characteristics of the Runyang Suspension Bridge（ RSB） including the wind speed and direction, the turbulence intensity, the turbulence integral length and power spectrum are analyzed based on measurement data from the wind environment monitoring subsystem of the structural health monitoring system （SHMS）of the RSB and field tests during strong winds. The differences between the typhoon and the strong northern wind are especially studied. It is found that the mean wind speed of the strong northern wind is a little smaller and the mean wind direction is more stable than that of the typhoon. The turbulence intensity of both the typhoon and the strong northern wind is greater than the values suggested in Chinese code, and the turbulence integral length difference between the typhoon and a strong northern wind is not clear. As for the along-wind turbulence power spectrum, the spectrum of the strong northern wind can fit the Kaimal spectrum better than that of the typhoon. The obtained results can provide measurement data for founding a strong wind characteristic database and determining the strong wind characteristic parameter values of the RSB.
文摘[ Objective] The aim of this study was to evaluate the clinical effect of the inactivated vaccine in oil emulsion against Newcastle disease and Fowl cholera, and provide conditions for combined prevention and control of Newcastle disease and Fowl cholera. [ Method] The mixture of avian pasteurella multocida （type A） virulent strain 1502 and Newcastle disease virus attenuated strain La Sota was prepared into five batches of the inactivated vaccine in oil emulsion to use in the field test for assessing its safety and effects on immune protection of chicken, duck and goose. [ Result] The field safety test showed that there was no adverse reaction in the vaccinated chickens, ducks and geese. The field test of immune effect for chickens suggested that the titers of hemagglutination inhibition antibody for Nescastle disease virus （ ND-HI ） in 7 - 14 day- old chickens and 60 -90 day-old young chickens were 2 -3 log2 higher than the control group after being vaccinated for 3 weeks, which could last for more than 4 months. The protection rate against avian pasteurella multocida was over 75.0% and its immune effect could last for 6 months. The field test of immune effect for duck and goose indicated that the titers of ND-HI antibody were all higher than 4.2 log2 in vaccinated ducks and geese while lower than 2 log2 in the control group after being vaccinated for 3 weeks. The protection rate against avian pasteurella multocida in vaccinated ducks and geese was higher than 75.0% and 62.5% respectively. [ Conclusion] The binary vaccine is safe for poultry and has good immune effects.
文摘In order to study the mechanical performance of a new type of cable-stayed beam-arch combination bridge, the results of field static and dynamic load tests are comparatively analyzed with numerical results based on the Jingyi bridge straddling the Daxi River in Yixing. First, the test scheme, tasks, the corresponding measure method, as well as the relevant codes are described. Secondly, two sets of three- dimensional finite element models are established. One is Ansys which uses the solid element and the other is Midas which adopts the beam element. Finally, the experimental and analytical results are comparatively analyzed, and they show an agreement with each other. The results show that the bridge possesses adequate load-carrying capacity under all static load cases, but the capacity of dissipating external input energy is insufficient due to the relatively smaller damping ratio. The study results can provide a reference for further study and optimization of this type of bridge. Calibrated finite-element models that reflect the real conditions can be used as a baseline for future maintenance of the bridge.
文摘Several methods of mixed programming with LabVIEW and Matlab are introduced.Taking explosin test as application background,the design method and implementation process using MathScript node and COM technology are mainly discussed.Based on this,the advantages of LabVIEW＇s interface development and Matlab＇s rich data operation functions are combined to achieve the fitting of explosion pressure field and dynamic compensation of temperature measured.
基金the Thailand Research Fund (TRF) for their financial support to this study
文摘Construction of seaside and underground wall bracing often uses stiffened deep cement mixed columns （SDCM）. This research investigates methods used to improve the level of bearing capacity of these SDCM when subjected to cyclic lateral loading via various types of stiffer cores. Eight piles, two deep cement mixed piles and six stiffened deep cement mixing piles with three different types of cores, H shape cross section prestressed concrete, steel pipe, and H-beam steel, were embedded though soft clay into medium-hard clay on site in Thailand. Cyclic horizontal loading was gradually applied until pile failure and the hysteresis loops of lateral load vs. lateral deformation were recorded. The lateral carrying capacities of the SDCM piles with an H-beam steel core increased by 3-4 times that of the DCM piles. This field research clearly shows that using H-beam steel as a stiffer core for SDCM piles is the best method to improve its lateral carrying capacity, ductility and energy dissipation capacity.
基金supported by the National Defense Science and Technology Innovation Zone Project(No.18-H863-05-ZT-001-018-09)
文摘A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.
基金supported by the National Natural Science Foundation of China(Nos.50725828,50908046,and 50978056)the National Science&Technology Pillar Program(No.2006BAJ03B05)the PhD Program Foundation of MOE(No.200802861012),China
文摘Field measurement of strong wind characteristics is of great significance for the development of bridge wind engineering. Located in east China, the Runyang Suspension Bridge (RSB) with a main span of 1490 m is the longest bridge in China and the third longest in the world. During the last four years, the RSB has suffered from typhoons and strong northern winds on more than ten occasions. To determine the strong wind characteristics of the RSB, wind measurement data obtained from field tests during strong winds and data from the wind environment monitoring subsystem of the structural health monitoring system (SHMS) of the RSB were combined to analyze the wind speed and direction, variation in wind speed with height, turbulence intensity, turbulence integral length, wind friction speed and the power spectrum. Comparative studies on the characteristics of these different strong winds were carried out based on the current wind-resistant design specification for highway bridges. Results showed that some regularity in wind characteristics can be found in these different typhoons passing through the RSB. The difference between a strong northern wind and a typhoon is relatively clear, and in summer the typhoon is the dominant wind load acting on the RSB. In addition, there were some differences between the measured strong wind characteristics and the values suggested by the specification, especially in respect to turbulence intensity and turbulence integral length. Results provide measurement data for establishing a strong wind characteristic database for the RSB and for determining the strong wind characteristic parameter values of this coastal area in east China.
基金supported by the National Transgenic Major Program of China(No.2019ZX08010-002)the China Agriculture Research System(No.CARS-21)the Major Science and Technology Projects of Breeding New Varieties of Agriculture in Zhejiang Province,China(No.2016C02058)。
文摘Nucleic acids in plant tissue lysates can be captured quickly by a cellulose filter paper and prepared for amplification after a quick purification.In this study,a published filter paper strip method was modified by sticking the filter paper on a polyvinyl chloride resin(PVC)sheet.This modified method is named EZ-D,for EASY DNA extraction.Compared with the original cetyl trimethylammonium bromide(CTAB)method,DNA extracted by EZ-D is more efficient in polymerase chain reaction(PCR)amplification due to the more stable performance of the EZ-D stick.The EZ-D method is also faster,easier,and cheaper.PCR analyses showed that DNA extracted from several types of plant tissues by EZ-D was appropriate for specific identification of biological samples.A regular PCR reaction can detect the EZ-D-extracted DNA template at concentration as low as 0.1 ng/μL.Evaluation of the EZ-D showed that DNA extracts could be successfully amplified by PCR reaction for DNA fragments up to 3000 bp in length and up to 80%in GC content.EZ-D was successfully used for DNA extraction from a variety of plant species and plant tissues.Moreover,when EZ-D was combined with the loop-mediated isothermal amplification(LAMP)method,DNA identification of biological samples could be achieved without the need for specialized equipment.As an optimized DNA purification method,EZ-D shows great advantages in application and can be used widely in laboratories where equipment is limited and rapid results are required.
基金Project(200612) supported by Hunan Province Transportation Department of China
文摘Large-scale field shear tests on ten specimens of the red-sandstone embankment at a highway in Hunan,China,were performed to examine mechanical characteristics and parameters of red-sandstone.The curves of thrust-displacement,failure mode,and shear strength parameters for red-sandstone with different water contents,different compactions,and different grain size distributions were obtained from the tests.A practical procedure of in-situ test for red-sandstone embankment was proposed to normalize the test equipment and test steps.Based on three-dimensional thrust-sliding limit equilibrium method,the formulas for calculating strength parameters of red-sandstone considering three-dimensional sliding surface were inferred.The results show that red-sandstone has typical complete curves of stress-strain,strain softening,which are caused by the special structure of red-sandstone;water content and compaction are important factors for strength and failure mode of red-sandstone;The average value of cohesion and internal friction angle of the specimens calculated by three-dimensional technique are 21.56 kPa and 29.29°,respectively,and those by traditional two-dimensional method are 25.52 kPa and 33.76°,respectively.
基金Supported by National Natural Science Foundation of China (No. 50778122)
文摘A real case of a steel lattice shell suffering a fire was studied. Based on the theory of field modeling, fire dynamic simulator (FDS) was used to identify the temperature field. The damage mechanism of the structure was determined by FEM analysis. After damage assessment, the shell was repaired with the pipe-encasement method. Finally, field test was employed to check the capacity of the structure after repair. The numerical study results indicate that the damage assessment agrees well with field inspection, verifying the accuracy of fire numerical simulation and FEM analysis. The field test results prove that the pipe-encasement method is secure and reasonable, and the repaired shell is safe.
基金financially supported by the National Natural Science Foundation of China (Grant Nos.51434009 and 51221003)。
文摘A novel expandable conductor was designed and applied in deep-water drilling to improve the vertical and lateral bearing capacity with a significant reduction of conductor jetting depth and soaking time. The vertical and lateral bearing capability of expandable conductors was depicted based on the ultimate subgrade reaction method and pile foundation bearing theory. The load-bearing characteristics of a laboratory-scale expandable conductor were analyzed through laboratory experiments. The serial simulation experiments are accomplished to study the bearing characteristics(vertical ultimate bearing capacity, lateral soil pressure, and lateral displacement) during the conductor soaking process. The laboratory experimental results show that the larger the length and thickness of expandable materials are,the higher the bearing capacity of the wellhead will be. During the conductor soaking process, the soil pressure around the three expandable conductors increases faster, strings representing a stronger squeezing effect and resulting in higher vertical bearing capacity. Furthermore, the lateral displacement of novel expandable conductor is smaller than that of the conventional conductor. All the advantages mentioned above contributed to the reduction of conductor’s jetting depth and soaking time. Lastly, the application workflow of a novel expandable deep-water drilling conductor was established and the autonomous expandable conductor was successfully applied in the South China Sea with a significant reduction of conductor’s jetting depth and soaking time. According to the soil properties and designed installation depth of the surface conductor, the arrangement of expandable materials should be designed reasonably to meet the safety condition and reduce the construction cost of the subsea wellhead.
基金基金项目：国家重点基础研究发展计划（973计划）资助项目（2011CB933202）中围科学院战略性先导科技专项课题资助项目（XDA06020101）+3 种基金国家杰出青年自然基金资助项目（61125105）国家高技术研究发展计划（863计划）资助项目（2009AA03Z411）中国科学院科研装备研制资助项目（Y2010015）国家自然科学基金资助项目（61027001,61002037）.Acknowledgements This work was supported by the Major National Scientific Research Plan （No.2011CB933202）, ＂Strategic Priority Research Program＂ of the Chinese Academy of Sciences （No.XDA06020101）, the National Science Fund for Distinguished Young Scholar （No. 61125105）, the Hi-Tech R＆D Program of China （No. 2009AA03Z411）, the CAS Program （No.Y2010015） and the National Natural Science Foundation of China （No. 61027001, No. 61002037）.
基金supported by the National Science and Technology Program during the Thirteenth Five-year Plan Period(CN).
文摘The operational experience of a horizontal segment well within the hard brittle shale layer of Longmaxi Formation in the southern Sichuan area demonstrates that the high-density oil-based drillingfluid(HDOF)induced down-hole working conditions(high-temperature,high-pressure,and solid-phase-dominance)directly impact the stability of the wellbore wall.Focusing on the impact of bottom-hole osmotic pressure and solid phase content and a series of density-reductionfield tests,we identified suitable countermeasures.In this paper,we discuss the impact of high osmotic pressure and operational measures,and provide details of thefield tests,which indicate that maintaining a higher osmotic pressure at the bottom-hole can reduce the formation pore pressure of the bottom-hole,widen thefluid density window,and maintain the stability of the wellbore wall.By improving the HDOF formula,such as using new treatment agents(e.g.,polymer-modified nano-sealing agent and ultra-micro barite weight additive)and optimizing the solid particle size distribution of HDOF,we can effectively address the down-hole problems.Thefield test of“pressure-controlled drillingþdensity reduction”in horizontal drilling operations was found to reduce the complexity of down-hole faults,improve the rate of penetration,and reduce overall costs.
基金the National Natural Science Foundation of China(Nos.51428901 and 51379122)
文摘Factors directly affecting the extraction rate of the piles pulled out by a vibratory pulling system are summarized and classified into five categories(excitation force,resistance,vibration amplitude,pile plumbness keeping,and slowing down at the later stage) from the mechanics and engineering practice.Field tests on steel sheet piles extracted by vibratory technique in different soil conditions are conducted to ascertain how these factors affect the extraction rate of a pile with regard to three major actors of vibratory pile pulling:the pile to be extracted,the selected pulling system,and the imposed soil conditions.The extraction rates of three different sheet pile types(having up to four different lengths) pulled out by two different vibratory pulling systems are documented.The piles with different lengths and types,pulled out with or without a clutch,have different extraction rates.The working parameters governing the vibratory hammer,such as excitation force and vibration amplitude,exert significant influences on the rate of pile extraction,especially in the early stages of up-lift process.The extraction rate of the piles driven in different soil conditions is uniform because different extraction resistances mainly refer to shaft friction.The properties of the pile-soil interface influence the extraction rate of the piles,and the extraction rate decreases with the time for which the piles have been buried in the earth.
文摘Low voltage ride through (LVRT) capability has become more and more an issue for newly integrated wind turbines. The LVRT programs described in this paper developed field tests for newly installed wind turbines on wind farms in Northeast China. It is therefore different from other papers that only validate LVRT control strategies through running computer software simulations. To examine a single wind turbine's LVRT capability, the wind turbine's terminal voltage dip was realized by using a grid voltage dip emulator, which was located on the 690 V side of the generator transformer. In this paper, by artificially making various grid faults, the dynamic behavior of DFIG and PMSG wind turbines are analyzed and compared, control strategies such as active/passive crowbar and chopper protection schemes are verified, and new active/reactive power compensation methods are investigated and compared.
基金the Applied Research Project of National Outstanding Young Scientists Fund Grant(51725802)National Natural Science Foundation of China-High Speed Rail Joint Fund(U1934208)Jiangxi Provincial Natural Science Foundation Key Project(20192ACB20001).
文摘The impermeability of concrete of the exterior wall of the underground tunnel in water-rich stratum is a key concern of engineers.Taking the Aixihu highway tunnel in Nanchang city as an example,the impermeability of the concrete in the side wall of the highway tunnel is tested,through multiple tests,such as the embedded steel pipe,water injection,and field observation.The results show that,under the action of 2mpa of water pressure,no water flow permeates from the side wall of the concrete tunnel,indicating that the impermeable performance of concrete tunnel in this section meets the engineering requirements,and hoping that this research can be used as a reference for other similar projects.
基金Project supported by the National Key Basic Research and Development Program(973 Program)“Theory and Technology Adaptability of Shale Gas Development in Typical Marine Blocks in South China”(No.2013CB228006).
文摘Horizontal shale gas well fracturing is mostly carried out by pumping bridge plugs.In the case of casing deformation,the bridge plug can not be pumped down to the designated position,so the hole sections below the deformation could not be stimulated according to the design program.About 30%of horizontal shale gas wells in the Changning and Weiyuan Blocks,Sichuan Basin,suffer various casing deformation after fracturing.Previously,the hole sections which could not be stimulated due to casing deformation were generally abandoned.As a result,the resources controlled by shale gas wells weren't exploited effectively and the fracturing effect was impacted greatly.There are a lot of difficulties in investigating casing deformation,such as complex mechanisms,various influencing factors and unpredictable deformation time.Therefore,it is especially important to seek a staged fracturing technology suitable for the casing deformation sections.In this paper,the staged fracturing technology with sand plugs inside fractures and the staged fracturing technology with temporary plugging balls were tested in casing deformation wells.The staged fracturing technology with sand plugs inside fractures was carried out in the mode of single-stage perforation and single-stage fracturing.The staged fracturing technology with temporary plugging balls was conducted in the mode of single perforation,continuous fracturing and staged ball dropping.Then,two kinds of technologies were compared in terms of their advantages and disadvantages.Finally,they were tested on site.According to the pressure response,the pressure monitoring of the adjacent wells and the microseismic monitoring in the process of actual fracturing,both technologies are effective in the stimulation of the casing deformation sections,realizing well control reserves efficiently and guaranteeing fracturing effects.
文摘Aimed at the current treatment status of the polymer-flooding wastewater in Bohai oilfield, electrochemical technology used for polymer-degradation and oil-removal was researched. It formed the process flow of cyclone mixed dosing → electrochemical removal oil → inclined tube removal oil → walnut shell filter, and a set of skid mounted wastewater containing polymer treatment plant was designed and manufactured, which was used for the field test of electrochemical treatment of wastewater containing polymer in offshore oilfield. The result shows that the oil removal rate of the electrochemical treatment process is over 98%, and the synergistic effect is significant especially used in conjunction with water clarifier of BHQ-04. When the amount of water clarifier is 50 - 150 mg/L, the oil content, the median particle diameter and the suspended solids content of the filtered water is 8 - 18 mg/L, 1.9 - 2.26 μm and 1.39 - 2.04 mg/L respectively, which reach the scene water quality standards for water injection.
