Supported polyamines are promising candidates for the chemical adsorption of CO_(2),the performance of which is highly dependent on the porous structure of supports.In this work,we synthesized a kind of fibrous carbon...Supported polyamines are promising candidates for the chemical adsorption of CO_(2),the performance of which is highly dependent on the porous structure of supports.In this work,we synthesized a kind of fibrous carbon microspheres(FCMs)from environmentally friendly and low-cost chitin.The synthesized FCMs have microspheric morphology and fibrous sub-architecture,and the carbon fibers interweave to form pores with large diameters.The flexibility of the pores formed by the interweaving of carbon fibers also enable the supporting of high quantity of polyamines.Given these features,pentaethylenehexamine(PEHA)was physically dispersed in the pores of FCMs to prepare PEHA/FCMs adsorbents,which were systematically characterized and investigated for CO_(2) capture performance.It is found that PEHA/FCMs adsorbents show excellent ability for CO_(2) adsorption,with the highest CO_(2) capacity of 3.90 mmol g^(-1) at 75℃ when using 10 vol%of CO_(2) for determinations.The reversibility of PEHA/FCMs adsorbents for CO_(2) adsorption is also fairly good,and PEHA/FCMs adsorbents have strong ability for the selective adsorption of low-content CO_(2) from N_(2).展开更多
The catalytically assisted self-propagating high-temperature synthesis of carbon fibrous nanostructures, where the iron-doped colloidal carbon xerogel is proposed as a catalyst system, was examined. The carbon xerogel...The catalytically assisted self-propagating high-temperature synthesis of carbon fibrous nanostructures, where the iron-doped colloidal carbon xerogel is proposed as a catalyst system, was examined. The carbon xerogel was prepared through carbonization of an iron doped organic xerogel at temperatures ranging from 600 to 1050℃. The reaction between calcium carbide and hexachloroethane in the presence of sodium azide is exothermic enough to proceed at a high temperature, self-sustaining regime. The combustion reactions of those mixtures enriched with iron-doped carbon xerogels were conducted in a stainless steel reactor---calorimetric bomb under an initial pressure of 1 MPa of argon. Scanning electron microscopy analysis of the combustion products revealed low yield of various type of carbon fibers （presumably nanotubes）, which grew via the tip-growth mechanism. The fibrous nanostructures were found in the vicinity of the spot of ignition, while in the outer and cooler area of the reactor, dusty products with soot-like morphology dominated. No significant correlation between the pyrolysis temperature of the carbon xerogel and the morphology of the obtained carbon fibrous nanostructures was observed.展开更多
A new sampling method of ambient air analysis using carbonized fibrous resin as a sorbent for polycyclic aromatic hydrocarbons (PAHs) was reported. The physical and chemical properties of the carbonized fibrous resin...A new sampling method of ambient air analysis using carbonized fibrous resin as a sorbent for polycyclic aromatic hydrocarbons (PAHs) was reported. The physical and chemical properties of the carbonized fibrous resins were measured. The sample pretreatment with ultrasonic extraction and subsequent clean-up elution through a silica gel column was optimized. The suitable ultrasonic extraction conditions were selected as follows: resin weight was 1.5 g, ultrasonic extraction time 20 min, volume of extraction solvent 100 ml and extraction operation times 2~3. The concentrated extractable organic matter was submitted to next step of clean-up procedure of adsorption chromatography on silica gel column/n-hexane and a mixture of dichloromethene:n-hexane solution 2:3 (v/v). The PAHs fractions in the real samples from Changzhou, China were particularly analyzed using GC-MS data system and the data of mass spectra, retention times and scan numbers of the real samples were compared with that of the standards of 16 PAHs listed by the US EPA as 損riority pollutants?of the environment. The analysis of the real samples indicates that the carbonized fibrous resin is a good sorbent. The pretreatment of samples of ambient air with carbonized fibrous resin as a sorbent for PAHs is proved to be reliable and might be used for the procedure of the determination of PAHs in atmospheric environment.展开更多
The rapid improvement in the running speed,transmission efficiency,and power density of miniaturized devices means that multifunctional flexible composites with excellent thermal management capability and high electro...The rapid improvement in the running speed,transmission efficiency,and power density of miniaturized devices means that multifunctional flexible composites with excellent thermal management capability and high electromagnetic interference(EMI)shielding performance are urgently required.Here,inspired by the fibrous pathways of the human nervous system,a“core–sheath”fibers structured strategy was proposed to prepare thermoplastic polyurethane/polydopamine/carbon nanotube(TPU/PDA/CNT)composites film with thermal management capability and EMI shielding performance.Firstly,TPU@PDA@CNT fibers with CNT shell were prepared by a facile polydopamine-assisted coating on electrospun TPU fibers.Subsequently,TPU/PDA/CNT composites with three-dimensional(3D)fibrous CNT“tracks”are obtained by a hot-pressing process,where CNTs distributed on adjacent fibers are compactly contacted.The fabricated TPU/PDA/CNT composites exhibit a high in-plane thermal conductivity(TC)of 9.6 W/(m·K)at low CNT loading of 7.6 wt.%.In addition,it also presents excellent mechanical properties and excellent EMI shielding effectiveness of 48.3 dB as well as multi-source driven thermal management capabilities.Hence,this study provides a simple yet scalable technique to prepare composites with advanced thermal management and EMI shielding performance to develop new-generation wireless communication technologies and portable intelligent electronic devices.展开更多
Thermal protection systems are very essential for high temperature thermal conductivity measurement system to reduce the heat loss to environment at the range of 600-1800 K. A compound multi-layer insulations structur...Thermal protection systems are very essential for high temperature thermal conductivity measurement system to reduce the heat loss to environment at the range of 600-1800 K. A compound multi-layer insulations structure which composed of inner carbon fibrous materials and outer alternately arranged alumina fibrous materials and high reflectivity foils is proposed for use in high temperature cylinder thermal protection systems. A coupled conductive and radiation governing equations is presented for heat transfer analysis of the structure. The finite volume method and the discrete ordinate method are used to solve the goveming equations. The optimization structure of the compound multi-layer insulations is investigated by considering the pressure of the gas, the density of the carbon fibrous materials, the density of the alumina fibrous materials, the number of reflective foil layers and the emissivity of reflective foils. The results show that the compound structure has the best thermal insulation performance when the pressure of the gas is below 0.01 kPa, the density of carbon fibrous materials is 180 kg m^-3, the density of alumina fibrous materials is 256 kg m^-3 and the number of reflective foil layers is 39. In addition, the thermal insulation performance is much better when the emissivity of reflective foils is lower.展开更多
基金This work was supported by the National Natural Science Foundation of China(22008033 and 32060577)the Natural Science Foundation of Jiangxi Province(20192ACB21016).
文摘Supported polyamines are promising candidates for the chemical adsorption of CO_(2),the performance of which is highly dependent on the porous structure of supports.In this work,we synthesized a kind of fibrous carbon microspheres(FCMs)from environmentally friendly and low-cost chitin.The synthesized FCMs have microspheric morphology and fibrous sub-architecture,and the carbon fibers interweave to form pores with large diameters.The flexibility of the pores formed by the interweaving of carbon fibers also enable the supporting of high quantity of polyamines.Given these features,pentaethylenehexamine(PEHA)was physically dispersed in the pores of FCMs to prepare PEHA/FCMs adsorbents,which were systematically characterized and investigated for CO_(2) capture performance.It is found that PEHA/FCMs adsorbents show excellent ability for CO_(2) adsorption,with the highest CO_(2) capacity of 3.90 mmol g^(-1) at 75℃ when using 10 vol%of CO_(2) for determinations.The reversibility of PEHA/FCMs adsorbents for CO_(2) adsorption is also fairly good,and PEHA/FCMs adsorbents have strong ability for the selective adsorption of low-content CO_(2) from N_(2).
基金supported by the internal grant of the Faculty of Advanced Technology and Chemistry, MUT(No. GW-08-977)
文摘The catalytically assisted self-propagating high-temperature synthesis of carbon fibrous nanostructures, where the iron-doped colloidal carbon xerogel is proposed as a catalyst system, was examined. The carbon xerogel was prepared through carbonization of an iron doped organic xerogel at temperatures ranging from 600 to 1050℃. The reaction between calcium carbide and hexachloroethane in the presence of sodium azide is exothermic enough to proceed at a high temperature, self-sustaining regime. The combustion reactions of those mixtures enriched with iron-doped carbon xerogels were conducted in a stainless steel reactor---calorimetric bomb under an initial pressure of 1 MPa of argon. Scanning electron microscopy analysis of the combustion products revealed low yield of various type of carbon fibers （presumably nanotubes）, which grew via the tip-growth mechanism. The fibrous nanostructures were found in the vicinity of the spot of ignition, while in the outer and cooler area of the reactor, dusty products with soot-like morphology dominated. No significant correlation between the pyrolysis temperature of the carbon xerogel and the morphology of the obtained carbon fibrous nanostructures was observed.
基金The Natural Science Foundation of Jangsu Province. No. BK93124313
文摘A new sampling method of ambient air analysis using carbonized fibrous resin as a sorbent for polycyclic aromatic hydrocarbons (PAHs) was reported. The physical and chemical properties of the carbonized fibrous resins were measured. The sample pretreatment with ultrasonic extraction and subsequent clean-up elution through a silica gel column was optimized. The suitable ultrasonic extraction conditions were selected as follows: resin weight was 1.5 g, ultrasonic extraction time 20 min, volume of extraction solvent 100 ml and extraction operation times 2~3. The concentrated extractable organic matter was submitted to next step of clean-up procedure of adsorption chromatography on silica gel column/n-hexane and a mixture of dichloromethene:n-hexane solution 2:3 (v/v). The PAHs fractions in the real samples from Changzhou, China were particularly analyzed using GC-MS data system and the data of mass spectra, retention times and scan numbers of the real samples were compared with that of the standards of 16 PAHs listed by the US EPA as 損riority pollutants?of the environment. The analysis of the real samples indicates that the carbonized fibrous resin is a good sorbent. The pretreatment of samples of ambient air with carbonized fibrous resin as a sorbent for PAHs is proved to be reliable and might be used for the procedure of the determination of PAHs in atmospheric environment.
基金supported by the National Natural Science Foundation of China(Nos.21704096,51703217,and 12072325)the Natural Science Foundation of Henan Province(No.20A430028).
文摘The rapid improvement in the running speed,transmission efficiency,and power density of miniaturized devices means that multifunctional flexible composites with excellent thermal management capability and high electromagnetic interference(EMI)shielding performance are urgently required.Here,inspired by the fibrous pathways of the human nervous system,a“core–sheath”fibers structured strategy was proposed to prepare thermoplastic polyurethane/polydopamine/carbon nanotube(TPU/PDA/CNT)composites film with thermal management capability and EMI shielding performance.Firstly,TPU@PDA@CNT fibers with CNT shell were prepared by a facile polydopamine-assisted coating on electrospun TPU fibers.Subsequently,TPU/PDA/CNT composites with three-dimensional(3D)fibrous CNT“tracks”are obtained by a hot-pressing process,where CNTs distributed on adjacent fibers are compactly contacted.The fabricated TPU/PDA/CNT composites exhibit a high in-plane thermal conductivity(TC)of 9.6 W/(m·K)at low CNT loading of 7.6 wt.%.In addition,it also presents excellent mechanical properties and excellent EMI shielding effectiveness of 48.3 dB as well as multi-source driven thermal management capabilities.Hence,this study provides a simple yet scalable technique to prepare composites with advanced thermal management and EMI shielding performance to develop new-generation wireless communication technologies and portable intelligent electronic devices.
基金supported by the National Natural Science Foundation of China(Grant No.51225602)
文摘Thermal protection systems are very essential for high temperature thermal conductivity measurement system to reduce the heat loss to environment at the range of 600-1800 K. A compound multi-layer insulations structure which composed of inner carbon fibrous materials and outer alternately arranged alumina fibrous materials and high reflectivity foils is proposed for use in high temperature cylinder thermal protection systems. A coupled conductive and radiation governing equations is presented for heat transfer analysis of the structure. The finite volume method and the discrete ordinate method are used to solve the goveming equations. The optimization structure of the compound multi-layer insulations is investigated by considering the pressure of the gas, the density of the carbon fibrous materials, the density of the alumina fibrous materials, the number of reflective foil layers and the emissivity of reflective foils. The results show that the compound structure has the best thermal insulation performance when the pressure of the gas is below 0.01 kPa, the density of carbon fibrous materials is 180 kg m^-3, the density of alumina fibrous materials is 256 kg m^-3 and the number of reflective foil layers is 39. In addition, the thermal insulation performance is much better when the emissivity of reflective foils is lower.
