An ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer （FPI） is proposed and employed for ultra- sonic imaging of seismic physical models （SPMs）. The FPI comprises a flexible ultra-thin gold fil...An ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer （FPI） is proposed and employed for ultra- sonic imaging of seismic physical models （SPMs）. The FPI comprises a flexible ultra-thin gold film and the end face of a graded-index multimode fiber （MMF）, both of which are enclosed in a ceramic tube. The MMF in a specified length can collimate the diverged light beam and compensate for the light loss inside the air cavity, leading to an increased spectral fringe visibility and thus a steeper spectral slope. By using the spectral sideband filtering technique, the collimated FP1 shows an improved ultrasonic response. Moreover, two-dimensional images of two SPMs are achieved in air by recon- structing the pulse-echo signals through using the time-of-flight approach. The proposed sensor with easy fabrication and compact size can be a good candidate for high-sensitivity and high-precision nondestructive testing of SPMs.展开更多
The sensitivity of contactless ultrasonic sensor is improved from 3.3% to 26% through acoustic and electric matching technique in this paper.Along dual crest lines auto seam tracking is firstly realized with contactle...The sensitivity of contactless ultrasonic sensor is improved from 3.3% to 26% through acoustic and electric matching technique in this paper.Along dual crest lines auto seam tracking is firstly realized with contactless ultrasonic sensing.The focused acoustic lens is accurately designed, and a sonic beam with 0.5 mm in diameter is achieved. By means of software and hardware technique the accuracy of seam tracking with ultrasonic sensing is 0.5 mm in lateral direction and 0.2 mm in longitudinal direction respectively.展开更多
One kind of the SAW seam tracking system with contactless ultrasonic sensor is presented in this paper. The new contactless ultrasonic sensor for seam tracking and the working principle of the seam tracking with the s...One kind of the SAW seam tracking system with contactless ultrasonic sensor is presented in this paper. The new contactless ultrasonic sensor for seam tracking and the working principle of the seam tracking with the sensor are introduced. Based on the experiments, the optimal values of the fuzzy control parameters α and k 3 are defined by means of the off line adjusting method. Because the self tuning fuzzy control is adopted in the seam tracking system, the overshoot of the system is restrained, the steady state error is reduced, and the system's response speed is improved effectively. The results of the SAW seam tracking experiments show that this system's tracking accuracy is up to ±0.5 mm and the system can satisfy the requirements of the engineering application.展开更多
In practical applications,noble metal doping is often used to prepare high performance gas sensors,but more noble metal doping will lead to higher preparation costs.In this study,CeO_(2)/ZnO-Pd with low palladium cont...In practical applications,noble metal doping is often used to prepare high performance gas sensors,but more noble metal doping will lead to higher preparation costs.In this study,CeO_(2)/ZnO-Pd with low palladium content was prepared by ultrasonic method with fast response and high selectivity for acetone sensing.With the same amount of palladium added,the selectivity coefficient of CeO_(2)/ZnO-Pd is 1.88 times higher than that of the stirred sensor.Compared with the pure PdO-doped CeO_(2)/ZnO-PdO material,the content of Pd in CeO_(2)/ZnO-PdO is about 30%of that in CeO_(2)/ZnO-PdO,but the selectivity coefficient for acetone is 2.56 times higher.The CeO_(2)/ZnO-Pd sensor has a higher response(22.54)to 50×10^(−6) acetone at 300℃and the selectivity coefficient is 2.57 times that of the CeO_(2)/ZnO sensor.The sensor has a sub-second response time(0.6 s)and still has a 2.36 response to 330×10^(−9) of acetone.Ultrasonic doping makes Pd particles smaller and increases the contact area with gas.Meanwhile,the composition of n-p-n heterojunction and the synergistic effect of Pd/PdO improve the sensor performance.It shows that ultrasonic Pd doping provides a way to improve the utilization rate of doped metals and prepare highly selective gas sensors.展开更多
Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional ...Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional PPS is limited by the cumulative error of inertial sensors,complex motion modes of pedestrians,and the low robustness of the multi-sensor collaboration structure.This paper presents a hybrid pedestrian positioning system using the combination of wearable inertial sensors and ultrasonic ranging(H-PPS).A robust two nodes integration structure is developed to adaptively combine the motion data acquired from the single waist-mounted and foot-mounted node,and enhanced by a novel ellipsoid constraint model.In addition,a deep-learning-based walking speed estimator is proposed by considering all the motion features provided by different nodes,which effectively reduces the cumulative error originating from inertial sensors.Finally,a comprehensive data and model dual-driven model is presented to effectively combine the motion data provided by different sensor nodes and walking speed estimator,and multi-level constraints are extracted to further improve the performance of the overall system.Experimental results indicate that the proposed H-PPS significantly improves the performance of the single PPS and outperforms existing algorithms in accuracy index under complex indoor scenarios.展开更多
The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryo...The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.展开更多
To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-typ...To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.展开更多
This paper proposes a method that rotation angle of servo motor and distance values of ultrasonic sensor are used for tracking an object in real-time while the robot keeps regular distance.Object detection distance wi...This paper proposes a method that rotation angle of servo motor and distance values of ultrasonic sensor are used for tracking an object in real-time while the robot keeps regular distance.Object detection distance widens by using ultrasonic sensors and object recognition,and movement of robot is controlled by angle of servo motor and distance of ultrasonic sensors.Not adopting the existing tracking methods:camera,laser-infrared(LRF)and many ultrasonic sensors,the proposed method proves that it is possible to track object using ultrasonic sensor and servo motor.Trajectory of robot is represented and analysed according to movement of object in limited conditions.展开更多
In Fukushima Daiichi Nuclear Power Plant (FDNPP) accident, the fuel debris formed in the Reactor Pressure Vessel (RPV) and Primary Containment Vessel (PCV) at Unit 1</span><span style="font-family:Verdan...In Fukushima Daiichi Nuclear Power Plant (FDNPP) accident, the fuel debris formed in the Reactor Pressure Vessel (RPV) and Primary Containment Vessel (PCV) at Unit 1</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">-</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">3. To accelerate and decide further decommissioning steps of the FDNPP, it is crucial to obtain realistic information of the debris and localize contaminated water leakage from PCV. Due to high radiation and dark environment inside the PCV, investigating instruments and techniques should necessarily to meet specification of radiation resistance, waterproofness, dust resistance and so on. This study focuses on development of ultrasonic measurement system using a couple of sectorial array sensors to localize contaminated water leakage and visualize shape of object that repre</span><span style="font-family:Verdana;">- </span><span style="font-family:Verdana;">senting fuel debris, simultaneously. In this study, Total Focusing Method</span><span style="font-family:Verdana;"> (TFM) and Ultrasonic Velocity Profiler (UVP) methods are considered to visualize object shape and flow pattern around it, respectively. To demonstrate applicability and reliability of developed measurement system with sectorial array sensors, a mock-up experiment result</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">of simulated water leakage and fuel debris shape were discussed in this paper.展开更多
Ultrasonic neuromodulation has gained recognition as a promising therapeutic approach.A miniature transducer capable of generating suitable-strength and broadband ultrasound is of great significance for achieving high...Ultrasonic neuromodulation has gained recognition as a promising therapeutic approach.A miniature transducer capable of generating suitable-strength and broadband ultrasound is of great significance for achieving high spatial precision ultrasonic neural stimulation.However,the ultrasound transducer with the above integrated is yet to be challenged.Here,we developed a fiber-optic photoacoustic emitter(FPE)with a diameter of 200μm,featuring controllable sound intensity and a broadband response(−6 dB bandwidth:162%).The device integrates MXene(Ti_(3)C_(2)Tx),known for its exceptional photothermal properties,and polydimethylsiloxane,which offers a high thermal expansion coefficient.This FPE,exhibiting high spatial precision(lateral:163.3μm,axial:207μm),is capable of selectively activating neurons in targeted regions.Using the TetTagging method to selectively express a cfos-promoter-inducible mCHERRY gene within the medial prefrontal cortex(mPFC),we found that photoacoustic stimulation significantly and temporarily activated the neurons.In vivo fiber photometry demonstrated that photoacoustic stimulation induced substantial calcium transients in mPFC neurons.Furthermore,we confirmed that photoacoustic stimulation of the mPFC using FPE markedly alleviates acute social defeat stress-induced emotional stress in mice.This work demonstrates the potential of FPEs for clinical applications,with a particular focus on modulating neural activity to regulate emotions.展开更多
Accurate and real-time detection of hydrogen(H_(2))is essential for ensuring energy security.Fiber-optic H_(2) sensors are gaining attention for their integration and remote sensing capabilities.However,they face chal...Accurate and real-time detection of hydrogen(H_(2))is essential for ensuring energy security.Fiber-optic H_(2) sensors are gaining attention for their integration and remote sensing capabilities.However,they face challenges,including complex fabrication processes and limited response times.Here,we propose a fiber-optic H_(2) sensing tip based on Tamm plasmon polariton(TPP)resonance,consisting of a multilayer metal/dielectric Bragg reflector deposited directly on the fiber end facet,simplifying the fabrication process.The fiber-optic TPP(FOTPP)tip exhibits both TPP and multiple Fabry-Perot(FP)resonances simultaneously,with the TPP employed for highly sensitive H_(2) detection.Compared to FP resonance,TPP exhibits more than twice the sensitivity under the same structural dimension without cavity geometry deformation.The excellent performance is attributed to alterations in phase-matching conditions,driven by changes in penetration depth of TPP.Furthermore,the FP mode is utilized to achieve an efficient photothermal effect to catalyze the reaction between H_(2) and the FOTPP structure.Consequently,the response and recovery speeds of the FOTPP tip under resonance-enhanced photothermal assistance are improved by 6.5 and 2.1 times,respectively.Our work offers a novel strategy for developing TPP-integrated fiber-optic tips,refines the theoretical framework of photothermal-assisted detection systems,and provides clear experimental evidence.展开更多
Complex surface shape measurement has been a focus topic in the CAD/CAM field. A popular method for measuring dimensional information is using a 3D coordinate measuring machine (CMM)with a touch trigger probe. The mea...Complex surface shape measurement has been a focus topic in the CAD/CAM field. A popular method for measuring dimensional information is using a 3D coordinate measuring machine (CMM)with a touch trigger probe. The measurement set up with CMM, however, is a time consuming task and the accuracy of the measurement deteriorates as the speed of measurement increase. Non-contact measurement is favored since high speed measurement can be achieved and problems with vibration and friction can be eliminated. Although much research has been conducted in non-contact measurement using image capturing and processing schemes, accuracy is poor and measurement is limited. Some optical technologies developed provide a good accuracy but the dynamic range and versatility is very limited. A novel fiber-optic sensor used for the inspection of complex internal contours is presented in this paper, which is able to measure a surface shape in a non-contact manner with high accuracy and high speed, and is compact and flexible to be incorporated into a CMM. Modulation functions for tilted surface shape measurement, based on the Gaussian distribution of the emitting beam from single-mode fiber (SMF), were derived for specular reflection. The feasibility of the proposed measurement principle was verified by simulations.展开更多
The principle and performance of a fiber-optic Faraday-effect magnetic-field sensor based on an yttrium iron garnet (YIG) and two flux concentrations are described. A single polarization-maintaining optical fiber link...The principle and performance of a fiber-optic Faraday-effect magnetic-field sensor based on an yttrium iron garnet (YIG) and two flux concentrations are described. A single polarization-maintaining optical fiber links the sensor head to the source and detection system, in which the technique of phase shift cancellation is used to cancel the phase shift that accumulatein the optical fiber. Flux concentrators were exploited to enhance the YIG crystal magneto-optic sensitivity .The sensor system exhibited a noise-equivalent field of 8 pT/√Hz and a 3 dB bandwidth of ～10 MHz.展开更多
The recent advances in sensing and display technologies have been transforming our living environments drastically. In this paper, a new technique is introduced to accurately reconstruct indoor environments in three-d...The recent advances in sensing and display technologies have been transforming our living environments drastically. In this paper, a new technique is introduced to accurately reconstruct indoor environments in three-dimensions using a mobile platform. The system incorporates 4 ultrasonic sensors scanner system, an HD web camera as well as an inertial measurement unit (IMU). The whole platform is mountable on mobile facilities, such as a wheelchair. The proposed mapping approach took advantage of the precision of the 3D point clouds produced by the ultrasonic sensors system despite their scarcity to help build a more definite 3D scene. Using a robust iterative algorithm, it combined the structure from motion generated 3D point clouds with the ultrasonic sensors and IMU generated 3D point clouds to derive a much more precise point cloud using the depth measurements from the ultrasonic sensors. Because of their ability to recognize features of objects in the targeted scene, the ultrasonic generated point clouds performed feature extraction on the consecutive point cloud to ensure a perfect alignment. The range measured by ultrasonic sensors contributed to the depth correction of the generated 3D images (the 3D scenes). Experiments revealed that the system generated not only dense but precise 3D maps of the environments. The results showed that the designed 3D modeling platform is able to help in assistive living environment for self-navigation, obstacle alert, and other driving assisting tasks.展开更多
The efficacy of an automated collision detection system is contingent upon the caliber and volume of data at its disposal. In the event that the data is deficient, incongruous, or erroneous, it has the potential to ge...The efficacy of an automated collision detection system is contingent upon the caliber and volume of data at its disposal. In the event that the data is deficient, incongruous, or erroneous, it has the potential to generate erroneous positive or negative outcomes, thereby compromising the system’s credibility. The occurrence of false positives is observed when the system erroneously identifies genuine activity as collusion. The phenomenon of false negatives arises when the system is unable to identify instances of genuine collusion. Collusion detection systems are required to handle substantial volumes of data in real time, capable of analyzing relationships between different objects. The intricate nature of collusion can pose difficulties in devising and executing efficient systems for its detection. The present study proposes an automated anti-collision system that utilizes sensor devices to detect objects and activate an alert mechanism in the event that the vehicle approaches the object in close proximity. The study introduces a novel methodology for mitigating vehicular accidents by implementing a combined system that integrates collision detection and alert mechanisms. The proposed system comprises an ultrasonic sensor, a microprocessor, and an alarm system. The sensor transmits a signal to the microcontroller, which in turn sends a signal to the warning unit. The warning unit is designed to prevent potential accidents by emitting an audible warning signal through a buzzer. Additionally, the distance information is displayed on an LCD screen. The Proteus Design Suite is utilized for simulation purposes, while Arduino.cc is employed for implementation.展开更多
In this study, we fabricated a sapphire based fiber-optic radiation sensor. To evaluate the fiber- optic radiation sensor, we measured the spectrum and intensity of the luminescence generated from the fiber-optic radi...In this study, we fabricated a sapphire based fiber-optic radiation sensor. To evaluate the fiber- optic radiation sensor, we measured the spectrum and intensity of the luminescence generated from the fiber-optic radiation sensor according to the thickness of the PMMA block by irradiation of gamma rays emitted from a Co-60 source. And the result was compared with the value calculated from the formula of Lambert-Beer.展开更多
A compact and high-resolution fiber-optic refractive index(RI)sensor based on a microwave photonic filter(MPF)is proposed and experimentally validated.The sensing head utilizes a cascaded in-line interferometer fabric...A compact and high-resolution fiber-optic refractive index(RI)sensor based on a microwave photonic filter(MPF)is proposed and experimentally validated.The sensing head utilizes a cascaded in-line interferometer fabricated by an input single-mode fiber(SMF)tapered fusion with no-core fiber-thin-core fiber(TCF)-SMF.The surrounding RI(SRI)can be demodulated by tracing the passband’s central frequency of the MPF,which is constructed by the cascaded in-line interferometer,electro-optic modulator,and a section of dispersion compensation fiber.The sensitivity of the sensor is tailorable through the use of different lengths of TCF.Experimental results reveal that with a 30 mm length of TCF,the sensor achieves a maximum theoretical sensitivity and resolution of-1.403 GHz∕refractive index unit eRIUT and 1.425×10^(-7) RIU,respectively,which is at least 6.3 times higher than what has been reported previously.Furthermore,the sensor exhibits temperature-insensitive characteristics within the range of 25℃-75℃,with a temperatureinduced frequency change of only±1.5 MHz.This value is significantly lower than the frequency change induced by changes in the SRI.The proposed MPF-based cascaded in-line interferometer RI sensor possesses benefits such as easy manufacture,low cost,high resolution,and temperature insensitivity.展开更多
With the rapid development of the Internet of Things(IoT)technology,fiber-optic sensors,as a kind of high-precision and high-sensitivity measurement tool,are increasingly widely used in the field of IoT.This paper out...With the rapid development of the Internet of Things(IoT)technology,fiber-optic sensors,as a kind of high-precision and high-sensitivity measurement tool,are increasingly widely used in the field of IoT.This paper outlines the advantages of fiber-optic sensors over traditional sensors,such as high precision,strong resistance to electromagnetic interference,and long transmission distance.On this basis,the paper discusses the application scenarios of fiber-optic sensors in the Internet of Things,including environmental monitoring,intelligent industry,medical and health care,intelligent transportation,and other fields.It is hoped that this study can provide theoretical support and practical guidance for the further development of fiber-optic sensors in the field of the Internet of Things,as well as promote the innovation and application of IoT.展开更多
Oil reservoirs with low permeability and porosity that are in the middle and late exploitation periods in China＇s onshore oil fields are mostly in the high-water-cut production stage.This stage is associated with sev...Oil reservoirs with low permeability and porosity that are in the middle and late exploitation periods in China＇s onshore oil fields are mostly in the high-water-cut production stage.This stage is associated with severely non-uniform local-velocity flow profiles and dispersed-phase concentration（of oil droplets） in oil-water two-phase flow,which makes it difficult to measure water holdup in oil wells.In this study,we use an ultrasonic method based on a transmission-type sensor in oil-water two-phase flow to measure water holdup in lowvelocity and high water-cut conditions.First,we optimize the excitation frequency of the ultrasonic sensor by calculating the sensitivity of the ultrasonic field using the finite element method for multiphysics coupling.Then we calculate the change trend of sound pressure level attenuation ratio with the increase in oil holdup to verify the feasibility of the employed diameter for the ultrasonic sensor.Based on the results,we then investigate the effects of oildroplet diameter and distribution on the ultrasonic field.To further understand the measurement characteristics of the ultrasonic sensor,we perform a flow loop test on vertical upward oilwater two-phase flow and measure the responses of the optimized ultrasonic sensor.The results show that the ultrasonic sensor yields poor resolution for a dispersed oil slug in water flow（D OS/W flow）,but the resolution is favorable for dispersed oil in water flow（D O/W flow） and very fine dispersed oil in water flow（VFD O/W flow）.This research demonstrates the potential application of a pulsed-transmission ultrasonic method for measuring the fraction of individual components in oil-water two-phase flow with a low mixture velocity and high water cut.展开更多
In the present work, an experimental study of bubbly two-phase flow in a rectangular bubble column was performed using two ultrasonic array sensors, which can measure the instantaneous velocity of gas bubbles on multi...In the present work, an experimental study of bubbly two-phase flow in a rectangular bubble column was performed using two ultrasonic array sensors, which can measure the instantaneous velocity of gas bubbles on multiple measurement lines. After the sound pressure distribution of sensors had been evaluated with a needle hydrophone technique, the array sensors were applied to two-phase bubble col- umn, To assess the accuracy of the measurement system with array sensors for one and two-dimensional velocity, a simultaneous measurement was performed with an optical measurement technique called particle image velocimetry （PIV）. Experimental results showed that accuracy of the measurement system with array sensors is under 10% for one-dimensional velocity profile measurement compared with PIV technique. The accuracy of the system was estimated to be under 20% along the mean flow direction in the case of two-dimensional vector mapping.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61735014,61327012,and 61275088)the Scientific Research Program Funded by Shaanxi Provincial Education Department,China(Grant No.08JZ58)the Northwest University Graduate Innovation and Creativity Funds,China(Grant No.YZZ17088)
文摘An ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer （FPI） is proposed and employed for ultra- sonic imaging of seismic physical models （SPMs）. The FPI comprises a flexible ultra-thin gold film and the end face of a graded-index multimode fiber （MMF）, both of which are enclosed in a ceramic tube. The MMF in a specified length can collimate the diverged light beam and compensate for the light loss inside the air cavity, leading to an increased spectral fringe visibility and thus a steeper spectral slope. By using the spectral sideband filtering technique, the collimated FP1 shows an improved ultrasonic response. Moreover, two-dimensional images of two SPMs are achieved in air by recon- structing the pulse-echo signals through using the time-of-flight approach. The proposed sensor with easy fabrication and compact size can be a good candidate for high-sensitivity and high-precision nondestructive testing of SPMs.
文摘The sensitivity of contactless ultrasonic sensor is improved from 3.3% to 26% through acoustic and electric matching technique in this paper.Along dual crest lines auto seam tracking is firstly realized with contactless ultrasonic sensing.The focused acoustic lens is accurately designed, and a sonic beam with 0.5 mm in diameter is achieved. By means of software and hardware technique the accuracy of seam tracking with ultrasonic sensing is 0.5 mm in lateral direction and 0.2 mm in longitudinal direction respectively.
文摘One kind of the SAW seam tracking system with contactless ultrasonic sensor is presented in this paper. The new contactless ultrasonic sensor for seam tracking and the working principle of the seam tracking with the sensor are introduced. Based on the experiments, the optimal values of the fuzzy control parameters α and k 3 are defined by means of the off line adjusting method. Because the self tuning fuzzy control is adopted in the seam tracking system, the overshoot of the system is restrained, the steady state error is reduced, and the system's response speed is improved effectively. The results of the SAW seam tracking experiments show that this system's tracking accuracy is up to ±0.5 mm and the system can satisfy the requirements of the engineering application.
基金Project(2023JJ10005)supported by the Natural Science Foundation of Hunan Province,ChinaProjects(51772082,51804106)supported by the National Natural Science Foundation of China。
文摘In practical applications,noble metal doping is often used to prepare high performance gas sensors,but more noble metal doping will lead to higher preparation costs.In this study,CeO_(2)/ZnO-Pd with low palladium content was prepared by ultrasonic method with fast response and high selectivity for acetone sensing.With the same amount of palladium added,the selectivity coefficient of CeO_(2)/ZnO-Pd is 1.88 times higher than that of the stirred sensor.Compared with the pure PdO-doped CeO_(2)/ZnO-PdO material,the content of Pd in CeO_(2)/ZnO-PdO is about 30%of that in CeO_(2)/ZnO-PdO,but the selectivity coefficient for acetone is 2.56 times higher.The CeO_(2)/ZnO-Pd sensor has a higher response(22.54)to 50×10^(−6) acetone at 300℃and the selectivity coefficient is 2.57 times that of the CeO_(2)/ZnO sensor.The sensor has a sub-second response time(0.6 s)and still has a 2.36 response to 330×10^(−9) of acetone.Ultrasonic doping makes Pd particles smaller and increases the contact area with gas.Meanwhile,the composition of n-p-n heterojunction and the synergistic effect of Pd/PdO improve the sensor performance.It shows that ultrasonic Pd doping provides a way to improve the utilization rate of doped metals and prepare highly selective gas sensors.
基金supported by the National Natural Science Foundation of China under(Grant No.52175531)in part by the Science and Technology Research Program of Chongqing Municipal Education Commission under Grant(Grant Nos.KJQN202000605 and KJZD-M202000602)。
文摘Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional PPS is limited by the cumulative error of inertial sensors,complex motion modes of pedestrians,and the low robustness of the multi-sensor collaboration structure.This paper presents a hybrid pedestrian positioning system using the combination of wearable inertial sensors and ultrasonic ranging(H-PPS).A robust two nodes integration structure is developed to adaptively combine the motion data acquired from the single waist-mounted and foot-mounted node,and enhanced by a novel ellipsoid constraint model.In addition,a deep-learning-based walking speed estimator is proposed by considering all the motion features provided by different nodes,which effectively reduces the cumulative error originating from inertial sensors.Finally,a comprehensive data and model dual-driven model is presented to effectively combine the motion data provided by different sensor nodes and walking speed estimator,and multi-level constraints are extracted to further improve the performance of the overall system.Experimental results indicate that the proposed H-PPS significantly improves the performance of the single PPS and outperforms existing algorithms in accuracy index under complex indoor scenarios.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11302225,11121202 and 11327802the National Key Project of Magneto-Constrained Fusion Energy Development Program under Grant No 2013GB110002the Postdoctoral Science Foundation of China under Grant No 2014M560820
文摘The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.
基金supported by the National Natural Science Foundation of China (Grant No. 61705025)the Natural Science Foundation of Chongqing (Grant Nos. cstc2019jcyjmsxm X043 and cstc2018jcyj AX0817)+2 种基金the Fund from the Science and Technology Project Affiliated to the Education Department of Chongqing Municipality (Grant Nos. KJQN201801217, KJQN202001214, KJQN201901226, and KJ1710247)the Fund from Chongqing Key Laboratory of Geological Environment Monitoring and Disaster Early-Warning in Three Gorges Reservoir Area (Grant Nos. ZD2020A0103 and ZD2020A0102)the Fundamental Research Funds for Chongqing Three Gorges University of China (Grant No. 19ZDPY08)。
文摘To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.
基金The MKE(The Ministry of Knowledge Economy),Korea,under the Human Resources Development Program for Robotics Support Program supervised by the NIPA(National IT Industry Promotion Agency)(NIPA-2012-H1502-12-1002)The MKE,Korea,under the ITRC(Infor mation Technology Research Center)Support Program supervised by the NIPA(NI-PA-2012-H0301-12-2006)
文摘This paper proposes a method that rotation angle of servo motor and distance values of ultrasonic sensor are used for tracking an object in real-time while the robot keeps regular distance.Object detection distance widens by using ultrasonic sensors and object recognition,and movement of robot is controlled by angle of servo motor and distance of ultrasonic sensors.Not adopting the existing tracking methods:camera,laser-infrared(LRF)and many ultrasonic sensors,the proposed method proves that it is possible to track object using ultrasonic sensor and servo motor.Trajectory of robot is represented and analysed according to movement of object in limited conditions.
文摘In Fukushima Daiichi Nuclear Power Plant (FDNPP) accident, the fuel debris formed in the Reactor Pressure Vessel (RPV) and Primary Containment Vessel (PCV) at Unit 1</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">-</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">3. To accelerate and decide further decommissioning steps of the FDNPP, it is crucial to obtain realistic information of the debris and localize contaminated water leakage from PCV. Due to high radiation and dark environment inside the PCV, investigating instruments and techniques should necessarily to meet specification of radiation resistance, waterproofness, dust resistance and so on. This study focuses on development of ultrasonic measurement system using a couple of sectorial array sensors to localize contaminated water leakage and visualize shape of object that repre</span><span style="font-family:Verdana;">- </span><span style="font-family:Verdana;">senting fuel debris, simultaneously. In this study, Total Focusing Method</span><span style="font-family:Verdana;"> (TFM) and Ultrasonic Velocity Profiler (UVP) methods are considered to visualize object shape and flow pattern around it, respectively. To demonstrate applicability and reliability of developed measurement system with sectorial array sensors, a mock-up experiment result</span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">of simulated water leakage and fuel debris shape were discussed in this paper.
基金supported by the National Nature Science Foundation of China(Grant Number:U24A20306,12102140,6227031087,62035006,and 6207030117).
文摘Ultrasonic neuromodulation has gained recognition as a promising therapeutic approach.A miniature transducer capable of generating suitable-strength and broadband ultrasound is of great significance for achieving high spatial precision ultrasonic neural stimulation.However,the ultrasound transducer with the above integrated is yet to be challenged.Here,we developed a fiber-optic photoacoustic emitter(FPE)with a diameter of 200μm,featuring controllable sound intensity and a broadband response(−6 dB bandwidth:162%).The device integrates MXene(Ti_(3)C_(2)Tx),known for its exceptional photothermal properties,and polydimethylsiloxane,which offers a high thermal expansion coefficient.This FPE,exhibiting high spatial precision(lateral:163.3μm,axial:207μm),is capable of selectively activating neurons in targeted regions.Using the TetTagging method to selectively express a cfos-promoter-inducible mCHERRY gene within the medial prefrontal cortex(mPFC),we found that photoacoustic stimulation significantly and temporarily activated the neurons.In vivo fiber photometry demonstrated that photoacoustic stimulation induced substantial calcium transients in mPFC neurons.Furthermore,we confirmed that photoacoustic stimulation of the mPFC using FPE markedly alleviates acute social defeat stress-induced emotional stress in mice.This work demonstrates the potential of FPEs for clinical applications,with a particular focus on modulating neural activity to regulate emotions.
基金financial supports from National Key Research and Development Program of China(2023YFB3209500)National Natural Science Foundation of China(NSFC)(12274052 and 62171076)+1 种基金Fundamental Research Funds for the Central Universities(DUT24ZD203)Bolian Research Funds of Dalian Maritime University and Fundamental Research Funds for the Central Universities(3132024605).
文摘Accurate and real-time detection of hydrogen(H_(2))is essential for ensuring energy security.Fiber-optic H_(2) sensors are gaining attention for their integration and remote sensing capabilities.However,they face challenges,including complex fabrication processes and limited response times.Here,we propose a fiber-optic H_(2) sensing tip based on Tamm plasmon polariton(TPP)resonance,consisting of a multilayer metal/dielectric Bragg reflector deposited directly on the fiber end facet,simplifying the fabrication process.The fiber-optic TPP(FOTPP)tip exhibits both TPP and multiple Fabry-Perot(FP)resonances simultaneously,with the TPP employed for highly sensitive H_(2) detection.Compared to FP resonance,TPP exhibits more than twice the sensitivity under the same structural dimension without cavity geometry deformation.The excellent performance is attributed to alterations in phase-matching conditions,driven by changes in penetration depth of TPP.Furthermore,the FP mode is utilized to achieve an efficient photothermal effect to catalyze the reaction between H_(2) and the FOTPP structure.Consequently,the response and recovery speeds of the FOTPP tip under resonance-enhanced photothermal assistance are improved by 6.5 and 2.1 times,respectively.Our work offers a novel strategy for developing TPP-integrated fiber-optic tips,refines the theoretical framework of photothermal-assisted detection systems,and provides clear experimental evidence.
文摘Complex surface shape measurement has been a focus topic in the CAD/CAM field. A popular method for measuring dimensional information is using a 3D coordinate measuring machine (CMM)with a touch trigger probe. The measurement set up with CMM, however, is a time consuming task and the accuracy of the measurement deteriorates as the speed of measurement increase. Non-contact measurement is favored since high speed measurement can be achieved and problems with vibration and friction can be eliminated. Although much research has been conducted in non-contact measurement using image capturing and processing schemes, accuracy is poor and measurement is limited. Some optical technologies developed provide a good accuracy but the dynamic range and versatility is very limited. A novel fiber-optic sensor used for the inspection of complex internal contours is presented in this paper, which is able to measure a surface shape in a non-contact manner with high accuracy and high speed, and is compact and flexible to be incorporated into a CMM. Modulation functions for tilted surface shape measurement, based on the Gaussian distribution of the emitting beam from single-mode fiber (SMF), were derived for specular reflection. The feasibility of the proposed measurement principle was verified by simulations.
文摘The principle and performance of a fiber-optic Faraday-effect magnetic-field sensor based on an yttrium iron garnet (YIG) and two flux concentrations are described. A single polarization-maintaining optical fiber links the sensor head to the source and detection system, in which the technique of phase shift cancellation is used to cancel the phase shift that accumulatein the optical fiber. Flux concentrators were exploited to enhance the YIG crystal magneto-optic sensitivity .The sensor system exhibited a noise-equivalent field of 8 pT/√Hz and a 3 dB bandwidth of ～10 MHz.
文摘The recent advances in sensing and display technologies have been transforming our living environments drastically. In this paper, a new technique is introduced to accurately reconstruct indoor environments in three-dimensions using a mobile platform. The system incorporates 4 ultrasonic sensors scanner system, an HD web camera as well as an inertial measurement unit (IMU). The whole platform is mountable on mobile facilities, such as a wheelchair. The proposed mapping approach took advantage of the precision of the 3D point clouds produced by the ultrasonic sensors system despite their scarcity to help build a more definite 3D scene. Using a robust iterative algorithm, it combined the structure from motion generated 3D point clouds with the ultrasonic sensors and IMU generated 3D point clouds to derive a much more precise point cloud using the depth measurements from the ultrasonic sensors. Because of their ability to recognize features of objects in the targeted scene, the ultrasonic generated point clouds performed feature extraction on the consecutive point cloud to ensure a perfect alignment. The range measured by ultrasonic sensors contributed to the depth correction of the generated 3D images (the 3D scenes). Experiments revealed that the system generated not only dense but precise 3D maps of the environments. The results showed that the designed 3D modeling platform is able to help in assistive living environment for self-navigation, obstacle alert, and other driving assisting tasks.
文摘The efficacy of an automated collision detection system is contingent upon the caliber and volume of data at its disposal. In the event that the data is deficient, incongruous, or erroneous, it has the potential to generate erroneous positive or negative outcomes, thereby compromising the system’s credibility. The occurrence of false positives is observed when the system erroneously identifies genuine activity as collusion. The phenomenon of false negatives arises when the system is unable to identify instances of genuine collusion. Collusion detection systems are required to handle substantial volumes of data in real time, capable of analyzing relationships between different objects. The intricate nature of collusion can pose difficulties in devising and executing efficient systems for its detection. The present study proposes an automated anti-collision system that utilizes sensor devices to detect objects and activate an alert mechanism in the event that the vehicle approaches the object in close proximity. The study introduces a novel methodology for mitigating vehicular accidents by implementing a combined system that integrates collision detection and alert mechanisms. The proposed system comprises an ultrasonic sensor, a microprocessor, and an alarm system. The sensor transmits a signal to the microcontroller, which in turn sends a signal to the warning unit. The warning unit is designed to prevent potential accidents by emitting an audible warning signal through a buzzer. Additionally, the distance information is displayed on an LCD screen. The Proteus Design Suite is utilized for simulation purposes, while Arduino.cc is employed for implementation.
文摘In this study, we fabricated a sapphire based fiber-optic radiation sensor. To evaluate the fiber- optic radiation sensor, we measured the spectrum and intensity of the luminescence generated from the fiber-optic radiation sensor according to the thickness of the PMMA block by irradiation of gamma rays emitted from a Co-60 source. And the result was compared with the value calculated from the formula of Lambert-Beer.
基金supported by the National Natural Science Foundation of China(Grant No.61975167).
文摘A compact and high-resolution fiber-optic refractive index(RI)sensor based on a microwave photonic filter(MPF)is proposed and experimentally validated.The sensing head utilizes a cascaded in-line interferometer fabricated by an input single-mode fiber(SMF)tapered fusion with no-core fiber-thin-core fiber(TCF)-SMF.The surrounding RI(SRI)can be demodulated by tracing the passband’s central frequency of the MPF,which is constructed by the cascaded in-line interferometer,electro-optic modulator,and a section of dispersion compensation fiber.The sensitivity of the sensor is tailorable through the use of different lengths of TCF.Experimental results reveal that with a 30 mm length of TCF,the sensor achieves a maximum theoretical sensitivity and resolution of-1.403 GHz∕refractive index unit eRIUT and 1.425×10^(-7) RIU,respectively,which is at least 6.3 times higher than what has been reported previously.Furthermore,the sensor exhibits temperature-insensitive characteristics within the range of 25℃-75℃,with a temperatureinduced frequency change of only±1.5 MHz.This value is significantly lower than the frequency change induced by changes in the SRI.The proposed MPF-based cascaded in-line interferometer RI sensor possesses benefits such as easy manufacture,low cost,high resolution,and temperature insensitivity.
文摘With the rapid development of the Internet of Things(IoT)technology,fiber-optic sensors,as a kind of high-precision and high-sensitivity measurement tool,are increasingly widely used in the field of IoT.This paper outlines the advantages of fiber-optic sensors over traditional sensors,such as high precision,strong resistance to electromagnetic interference,and long transmission distance.On this basis,the paper discusses the application scenarios of fiber-optic sensors in the Internet of Things,including environmental monitoring,intelligent industry,medical and health care,intelligent transportation,and other fields.It is hoped that this study can provide theoretical support and practical guidance for the further development of fiber-optic sensors in the field of the Internet of Things,as well as promote the innovation and application of IoT.
基金supported by the National Natural Science Foundation of China(Nos.51527805,11572220 and 41174109)
文摘Oil reservoirs with low permeability and porosity that are in the middle and late exploitation periods in China＇s onshore oil fields are mostly in the high-water-cut production stage.This stage is associated with severely non-uniform local-velocity flow profiles and dispersed-phase concentration（of oil droplets） in oil-water two-phase flow,which makes it difficult to measure water holdup in oil wells.In this study,we use an ultrasonic method based on a transmission-type sensor in oil-water two-phase flow to measure water holdup in lowvelocity and high water-cut conditions.First,we optimize the excitation frequency of the ultrasonic sensor by calculating the sensitivity of the ultrasonic field using the finite element method for multiphysics coupling.Then we calculate the change trend of sound pressure level attenuation ratio with the increase in oil holdup to verify the feasibility of the employed diameter for the ultrasonic sensor.Based on the results,we then investigate the effects of oildroplet diameter and distribution on the ultrasonic field.To further understand the measurement characteristics of the ultrasonic sensor,we perform a flow loop test on vertical upward oilwater two-phase flow and measure the responses of the optimized ultrasonic sensor.The results show that the ultrasonic sensor yields poor resolution for a dispersed oil slug in water flow（D OS/W flow）,but the resolution is favorable for dispersed oil in water flow（D O/W flow） and very fine dispersed oil in water flow（VFD O/W flow）.This research demonstrates the potential application of a pulsed-transmission ultrasonic method for measuring the fraction of individual components in oil-water two-phase flow with a low mixture velocity and high water cut.
文摘In the present work, an experimental study of bubbly two-phase flow in a rectangular bubble column was performed using two ultrasonic array sensors, which can measure the instantaneous velocity of gas bubbles on multiple measurement lines. After the sound pressure distribution of sensors had been evaluated with a needle hydrophone technique, the array sensors were applied to two-phase bubble col- umn, To assess the accuracy of the measurement system with array sensors for one and two-dimensional velocity, a simultaneous measurement was performed with an optical measurement technique called particle image velocimetry （PIV）. Experimental results showed that accuracy of the measurement system with array sensors is under 10% for one-dimensional velocity profile measurement compared with PIV technique. The accuracy of the system was estimated to be under 20% along the mean flow direction in the case of two-dimensional vector mapping.
