An improved zero-interpolation method with signal clipping to improve fiber nonlinearity tolerance in the long-haul coherent optical orthogonal frequency division multiplexing system （CO-OFDM） is presented. The new ...An improved zero-interpolation method with signal clipping to improve fiber nonlinearity tolerance in the long-haul coherent optical orthogonal frequency division multiplexing system （CO-OFDM） is presented. The new technique is implemented by interpolating zero subcarriers and selecting the odd subcarriers to carry data and clipping conventional CO-OFDM signal at zero. With such a scheme,the effect of fiber nonlinearity can be miti-gated,and the wanted signal carried on odd subcarriers is or-thogonal to clipping noise,which falls on even frequencies. Simu-lation shows that the system Q value is improved by more than 2 dB at the length of 960 km展开更多
To achieve a low-complexity nonlinearity compensation(NLC)in high-symbol-rate(HSR)systems,we propose a modified weighted digital backpropagation(M-W-DBP)by jointly shifting the calculated position of nonlinear phase n...To achieve a low-complexity nonlinearity compensation(NLC)in high-symbol-rate(HSR)systems,we propose a modified weighted digital backpropagation(M-W-DBP)by jointly shifting the calculated position of nonlinear phase noise and considering the correlation of neighboring symbols in the NLC section of DBP.Based on this model,with the aid of neural network optimization,a learned version of M-W-DBP(M-W-LDBP)is also proposed and explored.Furthermore,enough technical details are revealed for the first time,including the principle of our proposed M-W-DBP and M-W-LDBP,the training process,and the complexity analysis of different DBPclass NLC algorithms.Evaluated numerically with QPSK,16QAM,and PS-64QAM modulation formats,1-step-per-span(1-StPS)M-W-DBP/LDBP achieves up to 1.29/1.49 dB and 0.63/0.74 dB signal-to-noise ratio improvement compared to chromatic dispersion compensation(CDC)in 90-GBaud and 128-GBaud 1000-km single-channel transmission systems,respectively.Moreover,1-StPS M-W-DBP/LDBP provides a more powerful NLC ability than 2-StPS LDBP but only needs about 60%of the complexity.The effectiveness of the proposed M-W-DBP and M-W-LDBP in the presence of laser phase noise is also verified and the necessity of using the learned version of M-WDBP is also discussed.This work is a comprehensive study of M-W-DBP/LDBP and other DBP-class NLC algorithms in HSR systems.展开更多
The all-optical wavelength conversion using cascaded four-wave mixing(FWM)phenomena with graphene oxide(GO)and a highly nonlinear fiber(HNLF)device is demonstrated experimentally.GO has a strong third-order nonlinear ...The all-optical wavelength conversion using cascaded four-wave mixing(FWM)phenomena with graphene oxide(GO)and a highly nonlinear fiber(HNLF)device is demonstrated experimentally.GO has a strong third-order nonlinear effect and is an excellent nonlinear optical material for nonlinear optical wavelength conversion.The group velocity matching of pump and signal,HNLF,and GO amplification promote the cascaded nonlinear frequency mixing process.From the experimental and analytical results,the maximum spacing between signal and pump is 21 nm,and specifically,the order of cascaded FWM light increases from order 1 to order 2 with increasing GO,and the first-order FWM conversion effi-ciency increases to a maximum of−14.5 dB.To the best of our knowledge,this is the first time that cascaded FWM-based all-optical wavelength conversion in HNLF-GO with wide wavelength selectivity is investigated with combined pump and signal light.Our findings not only provide an effective method for achieving all-optical wavelength conversion in cascaded FWM but also offer the possibility of fabricating high-performance nonlinear optical devices.展开更多
A new high nonlinear dispersion flattened photonic crystal fiber is proposed. This fiber has three-fold symmetry core. The doped region in the core and the big air-holes in the 1-st ring can make high nonlinearity in ...A new high nonlinear dispersion flattened photonic crystal fiber is proposed. This fiber has three-fold symmetry core. The doped region in the core and the big air-holes in the 1-st ring can make high nonlinearity in the PCF. And the small air-holes in the 1-st ring and the radial increasing diameters air-holes rings in cladding can be used to turn the dispersion properties of the PCF. We can achieve the optimized optical properties by carefully selecting the PCF's structure parameters. A PCF with flattened dispersion is obtained. The dispersion is within ±0.8 ps·nm-1·km-1 from 1.50 μm to 1.62 μm. The nonlinear coefficient is about 12.645 6 W-1·km-1, the fundamental mode area is about 10.257 9 μm2 and the birefringence is about 3.086 96×10-5 at 1.55 μm. This work may be useful for effective design and fabrication of dispersion flattened photonic crystal with high nonlinearities.展开更多
Time domain ABCD matrix formalism is a useful model for analyzing the characteristics of actively modelocked fiber laser. Based on this model and given more consideration on the influences of optical fiber dispersion ...Time domain ABCD matrix formalism is a useful model for analyzing the characteristics of actively modelocked fiber laser. Based on this model and given more consideration on the influences of optical fiber dispersion and optical fiber nonlinearity, the laser characteristic of actively modelocked fiber laser is analyzed, and the comparision of the theoretical analysis results with experimental ones is given.展开更多
The fiber nonlinearity and phase noise(PN)are the focused impairments in the optical communication system,induced by high-capacity transmission and high laser input power.The channels include high-capacity transmissio...The fiber nonlinearity and phase noise(PN)are the focused impairments in the optical communication system,induced by high-capacity transmission and high laser input power.The channels include high-capacity transmissions that cannot be achieved at the end side without aliasing because of fiber nonlinearity and PN impairments.Thus,addressing of these distortions is the basic objective for the 5G mobile network.In this paper,the fiber nonlinearity and PN are investigated using the assembled methodology of millimeter-wave and radio over fiber(mmWave-RoF).The analytical model is designed in terms of outage probability for the proposed mmWave-RoF system.The performance of mmWave-RoF against fiber nonlinearity and PN is studied for input power,output power and length using peak to average power ratio(PAPR)and bit error rate(BER)measuring parameters.The simulation outcomes present that the impacts of fiber nonlinearity and PNcan be balanced for a huge capacity mmWave-RoF model applying input power carefully.展开更多
In quantum noise stream cipher(QNSC)systems,it is difficult to compensate fiber nonlinearity by digital signal processing(DSP)due to interactions between chromatic dispersion(CD),amplified spontaneous emission(ASE)noi...In quantum noise stream cipher(QNSC)systems,it is difficult to compensate fiber nonlinearity by digital signal processing(DSP)due to interactions between chromatic dispersion(CD),amplified spontaneous emission(ASE)noise from erbiumdoped fiber amplifier(EDFA)and Kerr nonlinearity.Nonlinearity equalizer(NLE)based on machine learning(ML)algorithms have been extensively studied.However,most NLE based on supervised ML algorithms have high training overhead and computation complexity.In addition,the performance of these algorithms have a lot of randomness.This paper proposes two clustering algorithms based on Fuzzylogic C-Means Clustering(FLC)to compensate the fiber nonlinearity in quadrature amplitude modulation(QAM)-based QNSC system,including FLC based on subtractive clustering(SC)and annealing evolution(AE)algorithm.The performance of FLC-SC and FLC-AE are evaluated through simulation and experiment.The proposed algorithms can promptly obtain suitable initial centroids and choose optimal initial centroids of the clusters to achieve the global optimal initial centroids especially for high order modulation scheme.In the simulation,different parameter configurations are considered,including fiber length,optical signal-to-noise ratio(OSNR),clipping ratio and resolution of digital to analog converter(DAC).Further-more,we measure the Q-factor of transmission signal with different launched powers,DAC resolution and laser linewidth in the optical back-to-back(BTB)experiment with 80-km single mode fiber.Both simulation and experimental results show that the proposed techniques can greatly mitigate the signal impairments.展开更多
A novel three-ring-core few-mode fiber with large effective area and low nonlinear coefficient is proposed in this paper. The fiber characteristics based on the full-vector finite element method(FEM) with perfect matc...A novel three-ring-core few-mode fiber with large effective area and low nonlinear coefficient is proposed in this paper. The fiber characteristics based on the full-vector finite element method(FEM) with perfect matched layer boundary conditions show that four supermodes with large effective area, low nonlinear coefficient and low differential mode group delay(DMGD) are achieved. With the increase of input wavelength, the effective areas of three-ring-core few-mode fiber are increased, and the nonlinear coefficients are decreased. The bending losses are increased with the increase of input wavelength, and are decreased with the increase of bending radius. Moreover, the proposed fiber performs a nonlinear coefficient and DMGD flattened profile at a large wavelength range.展开更多
Stimulated Raman scattering in a double cladding optical fiber is studied with a continuous wave laser used as a pump source. Under various launch conditions, pump modes are differently excited. Considering the mode c...Stimulated Raman scattering in a double cladding optical fiber is studied with a continuous wave laser used as a pump source. Under various launch conditions, pump modes are differently excited. Considering the mode coupling effect among the pump modes, the evolution of the power in the Stokes modes is studied. The results show that the scattered waves （the Stokes waves） in the fiber core with 9%tm diameter and 0.14 NA could propagate predominantly in the fundamental mode of the fiber by carefully adjusting the pump light launching conditions.展开更多
A novel nonlinear mirror structure which can increase the optical signal-to-noise ratio of a distributed fiber Raman temperature sensor is proposed, and 6 dB improvement of the optical signal-to-noise ratio is obtaine...A novel nonlinear mirror structure which can increase the optical signal-to-noise ratio of a distributed fiber Raman temperature sensor is proposed, and 6 dB improvement of the optical signal-to-noise ratio is obtained. With the assistance of the nonlinear mirror, we demonstrate that the spatial resolution of the sensor is improved from 3 m to 1 m, and the temperature accuracy is improved from ±0.6℃ to ±0.2℃. The theoretical analysis and the experimental data are in good agreement.展开更多
Picosecond pulse pumped supercontinuum generation in photonic crystal fiber is investigated by performing a series of comparative experiments. The main purpose is to investigate the supercontinuum generation processes...Picosecond pulse pumped supercontinuum generation in photonic crystal fiber is investigated by performing a series of comparative experiments. The main purpose is to investigate the supercontinuum generation processes excited by a given pump source through the experimental study of some specific fibers. A 20-W all-fiber picosecond master oscillator-power amplifier （MOPA） laser is used to pump three different kinds of photonic crystal fibers for supercontinuum generation. Three diverse supercontinuum formation processes are observed to correspond to photonie crystal fibers with distinct dis- persion properties. The experimental results are consistent with the relevant theoretical results. Based on the above analyses, a watt-level broadband white light supercontinuum source spanning from 500 nm to beyond 1700 nm is demonstrated by using a picosecond fiber laser in combination with the matched photonic crystal fiber. The limitation of the group velocity matching curve of the photonic crystal fiber is also discussed in the paper.展开更多
From Maxwell＇s equations and Post＇s formalism, a generalized chiral nonlinear Schr6dinger equation （CNLSE） is obtained for the nonlinear chiral fiber. This equation governs light transmission through a dispersive ...From Maxwell＇s equations and Post＇s formalism, a generalized chiral nonlinear Schr6dinger equation （CNLSE） is obtained for the nonlinear chiral fiber. This equation governs light transmission through a dispersive nonlinear chiral fiber with joint action of chirality in linear and nonlinear ways. The generalized CNLSE shows a modu- lation of chirality to the effect of attenuation and nonlinearity compared with the case for a conventional fiber. Simulations based on the split-step beam propagation method reveal the role of nonlinearity with cooperation to chirality playing in the pulse evolution. By adjusting its strength the role of chirality in forming solitons is demonstrated for a given circularly polarized component. The application of nonlinear optical rotation is also discussed in an all-optical switch.展开更多
We report on a wide-band and stable mode-locked all-polarization-maintaining fiber laser configuration using a nonlinear optical loop mirror. The central wavelength of the laser is 1080.14nm and the 3dB bandwidth is 2...We report on a wide-band and stable mode-locked all-polarization-maintaining fiber laser configuration using a nonlinear optical loop mirror. The central wavelength of the laser is 1080.14nm and the 3dB bandwidth is 20.29nm. The repetition rate of the pulse is 3.28 MHz and the pulse width is 848ps. By tuning the pump power, which is centered at 980nrn, from 300mW to 380mW, we obtain a linearly changed output power from 6row to 7.12roW. The all-polarization-mMntaining fiber configuration is fundamental to the stability of the output power.展开更多
This paper studies chirped optical solitons in nonlinear optical fibers.However,we obtain diverse soliton solutions and new chirped bright and dark solitons,trigonometric function solutions and rational solutions by a...This paper studies chirped optical solitons in nonlinear optical fibers.However,we obtain diverse soliton solutions and new chirped bright and dark solitons,trigonometric function solutions and rational solutions by adopting two formal integration methods.The obtained results take into account the different conditions set on the parameters of the nonlinear ordinary differential equation of the new extended direct algebraic equation method.These results are more general compared to Hadi et al(2018 Optik 172545–53)and Yakada et al(2019 Optik197163108).展开更多
We report a Tm-doped noise-like mode-locked(NLML)pulsed fiber laser with a compact linear cavity which consists of dual nonlinear optical loop mirrors(NOLMs).The design of dual-NOLM shows both exceptional compactness ...We report a Tm-doped noise-like mode-locked(NLML)pulsed fiber laser with a compact linear cavity which consists of dual nonlinear optical loop mirrors(NOLMs).The design of dual-NOLM shows both exceptional compactness in construction and distinct flexibility.In this laser,mode-locking can be realized through the nonlinear optical loop mirror technique.Stable noise-like mode-locked pulses with spectral bandwidth of 29.18 nm and pulse energy of 46 nJ are generated at a central wavelength of 1999.7 nm.Our results indicate that such a simple and inexpensive structure can pave the way for the development of generating supercontinuum with desirable performance.展开更多
We experimentally discussed the output characteristics of a passively mode-locked erbium-doped fiber laser using a single-mode fiber(SMF)structure as a saturable absorber(SA)based on nonlinear optic loop mirror(NOLM)....We experimentally discussed the output characteristics of a passively mode-locked erbium-doped fiber laser using a single-mode fiber(SMF)structure as a saturable absorber(SA)based on nonlinear optic loop mirror(NOLM).The NOLM acting as an SA has properties of controllable pulse interval and pulse width.Four different types of NOLMs are experimentally discussed and the results show that fine adjustment to the coupler ratio together with optimization of the SMF length inside the NOLM can simultaneously implement high pulse energy and pulse internal tunability.The laser configuration provides a method to generate well-performing mode-locked lasing,and the investigations of the effects of changing some parameters of the laser also provide some help for the development of mode-locked fiber laser based on NOLM.展开更多
In dense wavelength division multiplexing(DWDM) optical transmission systems, cross phase modulation(XPM) due to Kerr effect causes phase shift and intensity modulation in each channel, which will lead the channel cap...In dense wavelength division multiplexing(DWDM) optical transmission systems, cross phase modulation(XPM) due to Kerr effect causes phase shift and intensity modulation in each channel, which will lead the channel capacity to be a random variable. An expression of the channel capacity dealing with XPM effect is presented, and the correctness and accuracy of this method are demonstrated by numerical simulation.展开更多
Fiber nonlinearity is one of the most important limiters of capacity in coherent optical communications. In this paper, we review two nonlinear compensation methods： digital backward propagation （BP） and nonlinear ...Fiber nonlinearity is one of the most important limiters of capacity in coherent optical communications. In this paper, we review two nonlinear compensation methods： digital backward propagation （BP） and nonlinear electrical equalizer （NLEE） based on the timedomain Volterra series. These compensation algorithms are implemented in a singlechannel 50 Gb/s coherent optical singlecarrier frequency division multiplexed （CO-SCFDM） system transmitting over 10 × 80 km of standard singlemode fiber （SSMF）.展开更多
Reinforced concrete(RC) load bearing wall is widely used in high-rise and mid-rise buildings. Due to the number of walls in plan and reduction in lateral force portion, this system is not only stronger against earthqu...Reinforced concrete(RC) load bearing wall is widely used in high-rise and mid-rise buildings. Due to the number of walls in plan and reduction in lateral force portion, this system is not only stronger against earthquakes, but also more economical. The effect of progressive collapse caused by removal of load bearing elements, in various positions in plan and stories of the RC load bearing wall system was evaluated by nonlinear dynamic and static analyses. For this purpose, three-dimensional model of 10-story structure was selected. The analysis results indicated stability, strength and stiffness of the RC load-bearing wall system against progressive collapse. It was observed that the most critical condition for removal of load bearing walls was the instantaneous removal of the surrounding walls located at the corners of the building where the sections of the load bearing elements were changed. In this case, the maximum vertical displacement was limited to 6.3 mm and the structure failed after applying the load of 10 times the axial load bored by removed elements. Comparison between the results of the nonlinear dynamic and static analyses demonstrated that the "load factor" parameter was a reasonable criterion to evaluate the progressive collapse potential of the structure.展开更多
While all-optical networks become more and more popular as the basis of the next generation Internet(NGI)infrastructure,such networks raise many critical security issues.High power inter-channel crosstalk attack is on...While all-optical networks become more and more popular as the basis of the next generation Internet(NGI)infrastructure,such networks raise many critical security issues.High power inter-channel crosstalk attack is one of the security issues which have negative effect on information security in optical networks.Optical fiber in optical networks has some nonlinear characteristics,such as self phase modulation(SPM),cross phase modulation(XPM),four-wave mixing(FWM)and stimulated Raman scattering(SRS).They can be used to implement high power inter-channel crosstalk attack by malicious attackers.The mechanism of high power inter-channel crosstalk attack is analyzed.When an attack occurs,attack signal power and fiber nonlinear refractive index are the main factors which affect quality of legitimate signals.The effect of high power inter-channel crosstalk attack on quality of legitimate signals is investigated by building simulation system in VPI software.The results show that interchannel crosstalk caused by high power attack signal leads to quality deterioration of legitimate signals propagated in the same fiber.The higher the power of attack signal is,the greater the fiber nonlinear refractive index is.The closer the channel spacing away from the attack signal is,the more seriously the legitimate signals are affected by attack.We also find that when attack position and power of attack signal are constant,attack signal cannot infinitely spread,while its attack ability shows a fading trend with the extension of propagation distance.展开更多
基金Supported by the National Natural Science Foundation of China (60871075)
文摘An improved zero-interpolation method with signal clipping to improve fiber nonlinearity tolerance in the long-haul coherent optical orthogonal frequency division multiplexing system （CO-OFDM） is presented. The new technique is implemented by interpolating zero subcarriers and selecting the odd subcarriers to carry data and clipping conventional CO-OFDM signal at zero. With such a scheme,the effect of fiber nonlinearity can be miti-gated,and the wanted signal carried on odd subcarriers is or-thogonal to clipping noise,which falls on even frequencies. Simu-lation shows that the system Q value is improved by more than 2 dB at the length of 960 km
基金supported in part by National Natural Science Foundation of China(No.62271080)in part by Fund of State Key Laboratory of IPOC(BUPT)(No.IPOC2022ZT06)in part by BUPT Excellent Ph.D Students Foundation(No.CX2022102).
文摘To achieve a low-complexity nonlinearity compensation(NLC)in high-symbol-rate(HSR)systems,we propose a modified weighted digital backpropagation(M-W-DBP)by jointly shifting the calculated position of nonlinear phase noise and considering the correlation of neighboring symbols in the NLC section of DBP.Based on this model,with the aid of neural network optimization,a learned version of M-W-DBP(M-W-LDBP)is also proposed and explored.Furthermore,enough technical details are revealed for the first time,including the principle of our proposed M-W-DBP and M-W-LDBP,the training process,and the complexity analysis of different DBPclass NLC algorithms.Evaluated numerically with QPSK,16QAM,and PS-64QAM modulation formats,1-step-per-span(1-StPS)M-W-DBP/LDBP achieves up to 1.29/1.49 dB and 0.63/0.74 dB signal-to-noise ratio improvement compared to chromatic dispersion compensation(CDC)in 90-GBaud and 128-GBaud 1000-km single-channel transmission systems,respectively.Moreover,1-StPS M-W-DBP/LDBP provides a more powerful NLC ability than 2-StPS LDBP but only needs about 60%of the complexity.The effectiveness of the proposed M-W-DBP and M-W-LDBP in the presence of laser phase noise is also verified and the necessity of using the learned version of M-WDBP is also discussed.This work is a comprehensive study of M-W-DBP/LDBP and other DBP-class NLC algorithms in HSR systems.
基金supported by the National Natural Science Foundation of China(Nos.61775032,11604042)the Fundamental Research Funds for the Central Universities(Nos.N2104022,N2004021)the"111 Project"(No.B16009).
文摘The all-optical wavelength conversion using cascaded four-wave mixing(FWM)phenomena with graphene oxide(GO)and a highly nonlinear fiber(HNLF)device is demonstrated experimentally.GO has a strong third-order nonlinear effect and is an excellent nonlinear optical material for nonlinear optical wavelength conversion.The group velocity matching of pump and signal,HNLF,and GO amplification promote the cascaded nonlinear frequency mixing process.From the experimental and analytical results,the maximum spacing between signal and pump is 21 nm,and specifically,the order of cascaded FWM light increases from order 1 to order 2 with increasing GO,and the first-order FWM conversion effi-ciency increases to a maximum of−14.5 dB.To the best of our knowledge,this is the first time that cascaded FWM-based all-optical wavelength conversion in HNLF-GO with wide wavelength selectivity is investigated with combined pump and signal light.Our findings not only provide an effective method for achieving all-optical wavelength conversion in cascaded FWM but also offer the possibility of fabricating high-performance nonlinear optical devices.
基金National Basic Research Program of China(973 Program)(2003CB314907) National Science Foundation ofCouncil of China(90604026 ,60310174) Postdoctoral Science Foundation of China(20060400059)
文摘A new high nonlinear dispersion flattened photonic crystal fiber is proposed. This fiber has three-fold symmetry core. The doped region in the core and the big air-holes in the 1-st ring can make high nonlinearity in the PCF. And the small air-holes in the 1-st ring and the radial increasing diameters air-holes rings in cladding can be used to turn the dispersion properties of the PCF. We can achieve the optimized optical properties by carefully selecting the PCF's structure parameters. A PCF with flattened dispersion is obtained. The dispersion is within ±0.8 ps·nm-1·km-1 from 1.50 μm to 1.62 μm. The nonlinear coefficient is about 12.645 6 W-1·km-1, the fundamental mode area is about 10.257 9 μm2 and the birefringence is about 3.086 96×10-5 at 1.55 μm. This work may be useful for effective design and fabrication of dispersion flattened photonic crystal with high nonlinearities.
文摘Time domain ABCD matrix formalism is a useful model for analyzing the characteristics of actively modelocked fiber laser. Based on this model and given more consideration on the influences of optical fiber dispersion and optical fiber nonlinearity, the laser characteristic of actively modelocked fiber laser is analyzed, and the comparision of the theoretical analysis results with experimental ones is given.
基金The authors acknowledge the support from the Deanship of Scientific Research,Najran University.Kingdom of Saudi Arabia,for funding this work under the research groups funding program grant code number(NU/RG/SERC/11/3).
文摘The fiber nonlinearity and phase noise(PN)are the focused impairments in the optical communication system,induced by high-capacity transmission and high laser input power.The channels include high-capacity transmissions that cannot be achieved at the end side without aliasing because of fiber nonlinearity and PN impairments.Thus,addressing of these distortions is the basic objective for the 5G mobile network.In this paper,the fiber nonlinearity and PN are investigated using the assembled methodology of millimeter-wave and radio over fiber(mmWave-RoF).The analytical model is designed in terms of outage probability for the proposed mmWave-RoF system.The performance of mmWave-RoF against fiber nonlinearity and PN is studied for input power,output power and length using peak to average power ratio(PAPR)and bit error rate(BER)measuring parameters.The simulation outcomes present that the impacts of fiber nonlinearity and PNcan be balanced for a huge capacity mmWave-RoF model applying input power carefully.
基金supported by NSFC Projects(Grant No.:61901053,61831003,62021005)the Fundamental Research Funds for the Central Universities(2021RC12).
文摘In quantum noise stream cipher(QNSC)systems,it is difficult to compensate fiber nonlinearity by digital signal processing(DSP)due to interactions between chromatic dispersion(CD),amplified spontaneous emission(ASE)noise from erbiumdoped fiber amplifier(EDFA)and Kerr nonlinearity.Nonlinearity equalizer(NLE)based on machine learning(ML)algorithms have been extensively studied.However,most NLE based on supervised ML algorithms have high training overhead and computation complexity.In addition,the performance of these algorithms have a lot of randomness.This paper proposes two clustering algorithms based on Fuzzylogic C-Means Clustering(FLC)to compensate the fiber nonlinearity in quadrature amplitude modulation(QAM)-based QNSC system,including FLC based on subtractive clustering(SC)and annealing evolution(AE)algorithm.The performance of FLC-SC and FLC-AE are evaluated through simulation and experiment.The proposed algorithms can promptly obtain suitable initial centroids and choose optimal initial centroids of the clusters to achieve the global optimal initial centroids especially for high order modulation scheme.In the simulation,different parameter configurations are considered,including fiber length,optical signal-to-noise ratio(OSNR),clipping ratio and resolution of digital to analog converter(DAC).Further-more,we measure the Q-factor of transmission signal with different launched powers,DAC resolution and laser linewidth in the optical back-to-back(BTB)experiment with 80-km single mode fiber.Both simulation and experimental results show that the proposed techniques can greatly mitigate the signal impairments.
基金supported by the National Natural Science Foundation of China(Nos.61671227 and 61431009)the Shandong Provincial Natural Science Foundation(No.ZR2011FM015)the Taishan Scholar Research Fund of Shandong Province
文摘A novel three-ring-core few-mode fiber with large effective area and low nonlinear coefficient is proposed in this paper. The fiber characteristics based on the full-vector finite element method(FEM) with perfect matched layer boundary conditions show that four supermodes with large effective area, low nonlinear coefficient and low differential mode group delay(DMGD) are achieved. With the increase of input wavelength, the effective areas of three-ring-core few-mode fiber are increased, and the nonlinear coefficients are decreased. The bending losses are increased with the increase of input wavelength, and are decreased with the increase of bending radius. Moreover, the proposed fiber performs a nonlinear coefficient and DMGD flattened profile at a large wavelength range.
文摘Stimulated Raman scattering in a double cladding optical fiber is studied with a continuous wave laser used as a pump source. Under various launch conditions, pump modes are differently excited. Considering the mode coupling effect among the pump modes, the evolution of the power in the Stokes modes is studied. The results show that the scattered waves （the Stokes waves） in the fiber core with 9%tm diameter and 0.14 NA could propagate predominantly in the fundamental mode of the fiber by carefully adjusting the pump light launching conditions.
基金supported by the National Natural Science Foundation of China under Grant No.60377021partially supported by Program for New Century Excellent Talents in University under Grant No. NCET-07-0152Sichuan Scientific Funds for Young Researchers under Grant No. 08ZQ026-012.
文摘A novel nonlinear mirror structure which can increase the optical signal-to-noise ratio of a distributed fiber Raman temperature sensor is proposed, and 6 dB improvement of the optical signal-to-noise ratio is obtained. With the assistance of the nonlinear mirror, we demonstrate that the spatial resolution of the sensor is improved from 3 m to 1 m, and the temperature accuracy is improved from ±0.6℃ to ±0.2℃. The theoretical analysis and the experimental data are in good agreement.
基金supported by the State Key Program of the National Natural Science Foundation of China(Grant No.61235008)the Postgraduate Innovation Foundation of National University of Defense Technology,China(Grant No.B110704)
文摘Picosecond pulse pumped supercontinuum generation in photonic crystal fiber is investigated by performing a series of comparative experiments. The main purpose is to investigate the supercontinuum generation processes excited by a given pump source through the experimental study of some specific fibers. A 20-W all-fiber picosecond master oscillator-power amplifier （MOPA） laser is used to pump three different kinds of photonic crystal fibers for supercontinuum generation. Three diverse supercontinuum formation processes are observed to correspond to photonie crystal fibers with distinct dis- persion properties. The experimental results are consistent with the relevant theoretical results. Based on the above analyses, a watt-level broadband white light supercontinuum source spanning from 500 nm to beyond 1700 nm is demonstrated by using a picosecond fiber laser in combination with the matched photonic crystal fiber. The limitation of the group velocity matching curve of the photonic crystal fiber is also discussed in the paper.
基金Supported by the National Natural Science Foundation of China under Grant No 60977032the Program for Innovation Research of Science of Harbin Institute of Technology(PIRS-HIT)under Grant No T201407
文摘From Maxwell＇s equations and Post＇s formalism, a generalized chiral nonlinear Schr6dinger equation （CNLSE） is obtained for the nonlinear chiral fiber. This equation governs light transmission through a dispersive nonlinear chiral fiber with joint action of chirality in linear and nonlinear ways. The generalized CNLSE shows a modu- lation of chirality to the effect of attenuation and nonlinearity compared with the case for a conventional fiber. Simulations based on the split-step beam propagation method reveal the role of nonlinearity with cooperation to chirality playing in the pulse evolution. By adjusting its strength the role of chirality in forming solitons is demonstrated for a given circularly polarized component. The application of nonlinear optical rotation is also discussed in an all-optical switch.
文摘We report on a wide-band and stable mode-locked all-polarization-maintaining fiber laser configuration using a nonlinear optical loop mirror. The central wavelength of the laser is 1080.14nm and the 3dB bandwidth is 20.29nm. The repetition rate of the pulse is 3.28 MHz and the pulse width is 848ps. By tuning the pump power, which is centered at 980nrn, from 300mW to 380mW, we obtain a linearly changed output power from 6row to 7.12roW. The all-polarization-mMntaining fiber configuration is fundamental to the stability of the output power.
文摘This paper studies chirped optical solitons in nonlinear optical fibers.However,we obtain diverse soliton solutions and new chirped bright and dark solitons,trigonometric function solutions and rational solutions by adopting two formal integration methods.The obtained results take into account the different conditions set on the parameters of the nonlinear ordinary differential equation of the new extended direct algebraic equation method.These results are more general compared to Hadi et al(2018 Optik 172545–53)and Yakada et al(2019 Optik197163108).
基金supported by the Nature Science Foundation of Chongqing(No.cstc2018jcyjAX0585)。
文摘We report a Tm-doped noise-like mode-locked(NLML)pulsed fiber laser with a compact linear cavity which consists of dual nonlinear optical loop mirrors(NOLMs).The design of dual-NOLM shows both exceptional compactness in construction and distinct flexibility.In this laser,mode-locking can be realized through the nonlinear optical loop mirror technique.Stable noise-like mode-locked pulses with spectral bandwidth of 29.18 nm and pulse energy of 46 nJ are generated at a central wavelength of 1999.7 nm.Our results indicate that such a simple and inexpensive structure can pave the way for the development of generating supercontinuum with desirable performance.
基金supported in part by the Zhejiang Province Science and Technology Plan Projects(No.LGG19F050001)the National Natural Science Foundation of China(No.601705055)the Zhejiang Provincial Natural Science Foundation of China(No.LY17F050012)。
文摘We experimentally discussed the output characteristics of a passively mode-locked erbium-doped fiber laser using a single-mode fiber(SMF)structure as a saturable absorber(SA)based on nonlinear optic loop mirror(NOLM).The NOLM acting as an SA has properties of controllable pulse interval and pulse width.Four different types of NOLMs are experimentally discussed and the results show that fine adjustment to the coupler ratio together with optimization of the SMF length inside the NOLM can simultaneously implement high pulse energy and pulse internal tunability.The laser configuration provides a method to generate well-performing mode-locked lasing,and the investigations of the effects of changing some parameters of the laser also provide some help for the development of mode-locked fiber laser based on NOLM.
文摘In dense wavelength division multiplexing(DWDM) optical transmission systems, cross phase modulation(XPM) due to Kerr effect causes phase shift and intensity modulation in each channel, which will lead the channel capacity to be a random variable. An expression of the channel capacity dealing with XPM effect is presented, and the correctness and accuracy of this method are demonstrated by numerical simulation.
基金supported by National Natural Science Foundation of China (No. 61077053, 60932004, and60877045)National Basic Research Program of China(No. 2010CB328201)
文摘Fiber nonlinearity is one of the most important limiters of capacity in coherent optical communications. In this paper, we review two nonlinear compensation methods： digital backward propagation （BP） and nonlinear electrical equalizer （NLEE） based on the timedomain Volterra series. These compensation algorithms are implemented in a singlechannel 50 Gb/s coherent optical singlecarrier frequency division multiplexed （CO-SCFDM） system transmitting over 10 × 80 km of standard singlemode fiber （SSMF）.
文摘Reinforced concrete(RC) load bearing wall is widely used in high-rise and mid-rise buildings. Due to the number of walls in plan and reduction in lateral force portion, this system is not only stronger against earthquakes, but also more economical. The effect of progressive collapse caused by removal of load bearing elements, in various positions in plan and stories of the RC load bearing wall system was evaluated by nonlinear dynamic and static analyses. For this purpose, three-dimensional model of 10-story structure was selected. The analysis results indicated stability, strength and stiffness of the RC load-bearing wall system against progressive collapse. It was observed that the most critical condition for removal of load bearing walls was the instantaneous removal of the surrounding walls located at the corners of the building where the sections of the load bearing elements were changed. In this case, the maximum vertical displacement was limited to 6.3 mm and the structure failed after applying the load of 10 times the axial load bored by removed elements. Comparison between the results of the nonlinear dynamic and static analyses demonstrated that the "load factor" parameter was a reasonable criterion to evaluate the progressive collapse potential of the structure.
基金the National Natural Science Foundation of China(No.61179002)the National Defence Foundation of China(No.2012JY002-260)
文摘While all-optical networks become more and more popular as the basis of the next generation Internet(NGI)infrastructure,such networks raise many critical security issues.High power inter-channel crosstalk attack is one of the security issues which have negative effect on information security in optical networks.Optical fiber in optical networks has some nonlinear characteristics,such as self phase modulation(SPM),cross phase modulation(XPM),four-wave mixing(FWM)and stimulated Raman scattering(SRS).They can be used to implement high power inter-channel crosstalk attack by malicious attackers.The mechanism of high power inter-channel crosstalk attack is analyzed.When an attack occurs,attack signal power and fiber nonlinear refractive index are the main factors which affect quality of legitimate signals.The effect of high power inter-channel crosstalk attack on quality of legitimate signals is investigated by building simulation system in VPI software.The results show that interchannel crosstalk caused by high power attack signal leads to quality deterioration of legitimate signals propagated in the same fiber.The higher the power of attack signal is,the greater the fiber nonlinear refractive index is.The closer the channel spacing away from the attack signal is,the more seriously the legitimate signals are affected by attack.We also find that when attack position and power of attack signal are constant,attack signal cannot infinitely spread,while its attack ability shows a fading trend with the extension of propagation distance.
