The automobile industry is the first to form a typical representative of the global industry in modern industry,with the increase of the national emphasis on the environment,the automobile industry was regarded as an ...The automobile industry is the first to form a typical representative of the global industry in modern industry,with the increase of the national emphasis on the environment,the automobile industry was regarded as an important energy consumption and one of the sources of environmental pollution,the policy of energy conservation and emission reduction requirements for the automobile industry are becoming stricter over the years,energy conservation and emission reduction has becomes the main direction of product optimization in the automobile industry in recent years.Due of a series of excellent properties such as light weight and high strength,composite materials have become the main material for the development of lightweight vehicles.With the development of material technology and the update and iteration of manufacturing technology,composite materials are currently popular being adopted in the automotive field.展开更多
Owing to their high flexibility and directional actuation capabilities,macro fiber composites(MFCs)have attracted significant attention for the active control of structures,especially in the nonlinear vibration suppre...Owing to their high flexibility and directional actuation capabilities,macro fiber composites(MFCs)have attracted significant attention for the active control of structures,especially in the nonlinear vibration suppression applications for large-scale flexible structures.In this paper,an MFC-based self-feedback system is introduced for the active control of geometrically nonlinear steady-state forced vibrations in functionally graded carbon nanotube reinforced composite(FG-CNTRC)plates subject to transverse mechanical loads.Based on the first-order shear deformation theory and the von Kármán nonlinear strain-displacement relationship,the nonlinear vibration control equations of the plate with MFC sensor and actuator layers are derived by Hamilton's principle.These equations are discretized by the finite element method(FEM),and solved by the Newton-Raphson and direct iterative methods.A velocity feedback control algorithm is introduced,and the effects of the control gain and the MFC actuator position on the nonlinear vibration active control effectiveness are analyzed.Additionally,a nonlinear resonance analysis is carried out,considering the effects of carbon nanotube(CNT)volume fraction and distribution type.The results indicate that the intrinsic characteristics of the structures significantly influence the vibration behavior.Furthermore,the appropriate selections of control gain and MFC position are crucial for the effective active control of the structures.The present work provides a promising route of the active and efficient nonlinear vibration suppression for various thin-walled structures.展开更多
3D printing has emerged as an advanced manufacturing technique for carbon fiber reinforced composites and relevant structures that endure significant dynamic loads in engineering applications.The dynamic behavior of t...3D printing has emerged as an advanced manufacturing technique for carbon fiber reinforced composites and relevant structures that endure significant dynamic loads in engineering applications.The dynamic behavior of these materials,primarily influenced by the dynamic fiber pullout interface strength necessitates investigation into the rate-dependent fiber/matrix interfacial strength.This study modifies a Hopkinson tension bar to conduct dynamic pullout tests on a single fiber bundle,utilizing a low-impedance bar and an in-situ calibrated semiconductor strain gauge to capture weak stress signals.Stress equilibrium analyses are performed to validate the transient dynamic loading on single fiber bundle specimens.The results reveal that the fiber/matrix interfacial strength is rate-dependent,increasing with the loading rate,while remaining unaffected by the embedded length.Fracture microstructural analyses show minimal fiber pullout due to high interfacial stresses induced by longer embedded lengths.Lastly,suggestions are made for the efficient design of fiber pullout experiments.展开更多
The emerging biomass-based epoxy vitrimers hold great potential to fulfill the requirements for sustainable development of society.Since the existence of dynamic chemical bonds in vitrimers often reduces both the ther...The emerging biomass-based epoxy vitrimers hold great potential to fulfill the requirements for sustainable development of society.Since the existence of dynamic chemical bonds in vitrimers often reduces both the thermal and mechanical properties of epoxy resins, it is challenging to produce recyclable epoxy vitrimers with both excellent mechanical properties and good thermal stability. Herein, a monomer 4-(((5-(hydroxymethyl)furan-2-yl)methylene)amino)phenol(FCN) containing furan ring with potential to form high density of hydrogen bonding among repeating units is designed and copolymerized with glycerol triglycidyl ether to yield epoxy resin(FCN-GTE), which intrinsically has dual hydrogen bond networks, dynamic imine structure and resultant high performance. Importantly, as compared to the BPA-GTE, the FCN-GTE exhibits significantly improved mechanical properties owing to the increased density of hydrogen bond network and physical crosslinking interaction. Furthermore, density functional theory(DFT) calculation and in situ FTIR analysis is conducted to decipher the formation mechanism of hydrogen bond network. In addition, the FCN-GTE possesses superior UV shielding, chemical degradation, and recyclability because of the existence of abundant imine bonds. Notably, the FCN-GTE-based carbon fiber composites could be completely recycled in an amine solution.This study provides a facile strategy for synthesizing recyclable biomass-based high-performance epoxy vitrimers and carbon fiber composites.展开更多
This study examines the penetration of 12.7 mm armor piercing incendiary projectiles into SiC ceramic-fiber composite target plates.By observing the recovered projectile and the overall damage morphology of the cerami...This study examines the penetration of 12.7 mm armor piercing incendiary projectiles into SiC ceramic-fiber composite target plates.By observing the recovered projectile and the overall damage morphology of the ceramic-fiber composite target plates.Additionally,multi-level screening and weighing of the recovered projectile and ceramic fragments revealed that the mass distribution of the projectile and ceramic fragments under different backing structures conforms to a powerlaw distribution.Experimental results indicate that for single laminate as the backing,the fragmentation of the projectile and ceramics is highest when T300 is the material.Incorporating a T300 transition layer between the SiC ceramic and aramid fibers(Kevlar)or ultra-high molecular weight polyethylene(UHMWPE)increases the fragmentation of the projectile and ceramics,leading to increased energy absorption.The projectile’s head mainly exhibits pulverized abrasive fragmentation,while larger projectile fragments primarily result from shear and tensile stress-induced shear-tensile failure fractures.The primary damage mode of ceramics under high-speed impact is the expansion of ceramic cones and radial cracks.The main form of damage in UHMWPE laminate is interlayer separation caused by tensile waves,permanent plastic deformation at the back protrusion,and perforation failure primarily due to shear waves.The damage mode of Kevlar laminate is similar to that of UHMWPE,with the distinction being that Kevlar laminate primarily exhibits perforation failure caused by tensile waves.Carbon fiber T300 laminate damage mainly consists of cross-shaped brittle fractures caused by shear waves.展开更多
Piezoelectric materials are capable of actuation and sensing and have been used in a wide variety of smart devices and structures.Active fiber composite and macro fiber composite are newly developed types of piezoelec...Piezoelectric materials are capable of actuation and sensing and have been used in a wide variety of smart devices and structures.Active fiber composite and macro fiber composite are newly developed types of piezoelectric composites,and show superior properties to monolithic piezoelectric wafer due to their distinctive structures.Numerous work has focused on the performance prediction of the composites by evaluation of structural parameters and properties of the constituent materials with analytical and numerical methods.Various applications have been explored for the piezoelectric fiber composites,including vibration and noise control,health monitoring,morphing of structures and energy harvesting,in which the composites play key role and demonstrate the necessity for further development.展开更多
To improve the manufacture efficiency and promote the application of composites in the automobile industry, a new composite forming method, thermal stamping, was discussed to form composite parts directly. Experiments...To improve the manufacture efficiency and promote the application of composites in the automobile industry, a new composite forming method, thermal stamping, was discussed to form composite parts directly. Experiments on two typical stamping processes, thermal bending and thermal deep drawing, were conducted to investigate the forming behavior of composite sheets and analyze the influence of forming temperature on the formed composite part. Experimental results show that the locking angle for woven composite is about 30°. The bending load is smaller than 5 N in the stamping process and decreases with the increase of temperature. The optimal temperature to form the carbon fiber composite is 170 ℃. The die temperature distribution and the deformation of composite sheet were simulated by FEA software ABAQUS. To investigate the fiber movement of carbon woven fabric during stamping, the two-node three-dimension linear Truss unit T2D3 was chosen as the fiber element. The simulation results have a good agreement to the experimental results.展开更多
In the maritime industry, cost-effective and lightweight Fiber Reinforced Polymer (FRP) composites offer excellent mechanical properties, design flexibility, and corrosion resistance. However, their reliability in har...In the maritime industry, cost-effective and lightweight Fiber Reinforced Polymer (FRP) composites offer excellent mechanical properties, design flexibility, and corrosion resistance. However, their reliability in harsh seawater conditions is a concern. Researchers address this by exploring three approaches: coating fiber surfaces, hybridizing fibers and matrices with or without nanofillers, and interply rearrangement. This study focuses on evaluating the synergistic effects of interply rearrangement of glass/carbon fibers and hybrid nanofillers, specifically Multi-walled carbon nanotubes (MWCNT) and Halloysite nanotubes (HNT). The aim is to enhance impact properties by minimizing moisture absorption. Hybrid nanocomposites with equal-weight proportions of two nanofillers: 0 wt.%, 1 wt.%, and 2 wt.% were exposed to seawater for 90 days. Experimental data was subjected to modelling through the application of Predictive Fick’s Law. The study found that the hybrid composite containing 2 wt.% hybrid nanofillers exhibited a 22.10% increase in impact performance compared to non-modified counterparts. After 90 days of seawater aging, the material exhibited enhanced resistance to moisture absorption (15.74%) and minimal reduction in impact strength (8.52%) compared to its dry strength, with lower diffusion coefficients.展开更多
This paper shows a calculation model and a method for predicting the tensile strength of the random distributed short fiber composite.On the basis of Renjie Mao's model,the longitudinal tensile strength of the ali...This paper shows a calculation model and a method for predicting the tensile strength of the random distributed short fiber composite.On the basis of Renjie Mao's model,the longitudinal tensile strength of the aligned short fiber composite is formulated.Considering the transverse tensile strength and in plane shear strength of the unidirectional fiber composite,and the stress transformation relations of two couples of axes,the stress of the unidirectional fiber composite when it is loaded at an arbitrary angle is obtained.With the aid of an equivalence relation,the calculation formulation of the tensile strength of the random short fiber reinforced composite is deduced.展开更多
The morphological structure of various epoxies toughened with a special amorphous thermoplastic PEK-C and their carbon fiber composites were studied by using SEM. For both cases, phase separation and inversion took pl...The morphological structure of various epoxies toughened with a special amorphous thermoplastic PEK-C and their carbon fiber composites were studied by using SEM. For both cases, phase separation and inversion took place to form fine epoxy-rich globules dispersing in the PEK-C matrix, in which the epoxy-rich phase had the absolutely higher volume fraction. The phase structure and the interfacial properties were also studied by means of FTIR, DSC, and DMTA as well. An accompanying mechanical determination revealed that an improved toughness was achieved both in the blend casts and in the carbon fiber composites. A composite structural model was hence suggested.展开更多
Natural rubber grafted maleic anhydride （NR-g-MAH） was synthesized by mixing maleic anhydride （MAH） and natural rubber （NR） in solid state in a torque rheometer using dicurnyl peroxide （DCP） as initiator. Then...Natural rubber grafted maleic anhydride （NR-g-MAH） was synthesized by mixing maleic anhydride （MAH） and natural rubber （NR） in solid state in a torque rheometer using dicurnyl peroxide （DCP） as initiator. Then the self-prepared NR-g-MAH was used as a compatibilizer in the natural rubber/short nylon fiber composites. Both the fimctionalization of NR with MAH and the reaction between the modified rubber and the nylon fiber were confirmed by Fourier transform infrared spectroscopy （FTIR）. Composites with different nylon short fiber loadings （0, 5, 10, 15 and 20 phr） were compounded on a two-roll mill, and the effects of the NR-g-MAH on the tensile and thermal properties, fiber-rubber interaction, as well as the morphology of the natural rubber/short nylon fiber composites were investigated. At equal fiber loading, the NR-g-MAH compatibilized NR/short nylon fiber composites showed improved tensile properties, especially the tensile modulus at 100% strain which was about 1.5 times that of the corresponding un-compatibilized ones. The equilibrium swelling tests proved that the incorporation of NR-g-MAH increased the interaction between the nylon fibers and the NR matrix. The crosslink density measured with NMR techniques showed that the NR-g-MAH compatiblized composites had lower total crosslink density. The glass transition temperatures of the compatibilized composites were about 1 K higher than that of the corresponding un-compabilized ones. Morphology analysis of the NR/short nylon fiber composites confirmed NR-g-MAH improved interfacial bonding between the NR matrix and the nylon fibers. All these results signified that the NR-g-MAH could act as a good compatilizer of NR/short nylon fiber composites and had a potential for wide use considering its easy to be prepared and compounded with the composites.展开更多
Carbon fiber(C_(f))reinforced pyrolytic carbon(PyC)composites simultaneously possessing robust mechanical strength,excellent friction performances and outstanding anti-ablation properties are demanded for advanced aer...Carbon fiber(C_(f))reinforced pyrolytic carbon(PyC)composites simultaneously possessing robust mechanical strength,excellent friction performances and outstanding anti-ablation properties are demanded for advanced aerospace applications.Efficient architecture design and optimization of composites are promi-nent yet remain high challenging for realizing the above requirements.Herein,binary reinforcements of networked silicon nitride nanowires(Si_(3)N_(4) nws)and interconnected graphene(GE)have been successfully constructed into C f/PyC by precursor impregnation-pyrolysis and chemical vapor deposition.Notably,net-worked Si_(3)N_(4) nws are uniformly distributed among the carbon fibers,while interconnected GE is firmly rooted on the surface of both networked Si_(3)N_(4) nws and carbon fibers.In the networked Si_(3)N_(4) nws and interconnected GE reinforced C_(f)/PyC,networked Si_(3)N_(4) nws significantly boost the cohesion strength of PyC,while GE markedly improves the interface bonding of both Si_(3)N_(4) nws/PyC and fiber/PyC.Benefiting from the synergistic reinforcement effect of networked Si_(3)N_(4) nws and interconnected GE,the C_(f)/PyC have a prominent enhancement in mechanical(shear and compressive strengths increased by 119.9% and 52.84%,respectively)and friction(friction coefficient and wear rate reduced by 25.40% and 60.10%,respectively)as well as anti-ablation(mass ablation rate and linear ablation rate decreased by 71.25% and 63.01%,respectively).This present strategy for networked Si_(3)N_(4) nws and interconnected GE reinforced C_(f)/PyC provides a dominant route to produce mechanically robust,frictionally resisting and ablatively resistant materials for use in advanced aerospace applications.展开更多
Realizing the accurate characterization for the dynamic damage process is a great challenge. Here we carry out testing simultaneously for dynamic monitoring and acoustic emission （AE） statistical analysis towards fi...Realizing the accurate characterization for the dynamic damage process is a great challenge. Here we carry out testing simultaneously for dynamic monitoring and acoustic emission （AE） statistical analysis towards fiber composites under mode-Ⅱ delamination damage. The load curve, AE relative energy, amplitude distribution, and amplitude spectrum are obtained and the delamination damage mechanism of the composites is investigated by the microscopic observation of a fractured specimen. The results show that the micro-damage accumulation around the crack tip region has a great effect on the evolutionary process of delamination. AE characteristics and amplitude spectrum represent the damage and the physical mechanism originating from the hierarchical microstructure. Our finding provides a novel aud feasible strategy to simultaneously evaluate the dynamic response and micro-damage mechanism for fiber composites.展开更多
The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and b...The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and ballistic test were performed to the prepared composites.After the tests,the specimens were recovered and analyzed for micromorphology.Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC.Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC,but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC.For the ballistic test,it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests,microscopic analysis of the specimens was applied,and their failure mechanism was discussed.The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage.Although delamination damage can be found in the WBFC under the above loading conditions,the degree of delamination is far less than that of the UBFC.展开更多
A constitutive model is constructed to consider the resin matrix post-yield softening and progressive hardening behaviors. A user-defined material mechanical behavior （UMAT） subroutine is created, then the non-linea...A constitutive model is constructed to consider the resin matrix post-yield softening and progressive hardening behaviors. A user-defined material mechanical behavior （UMAT） subroutine is created, then the non-linear three-dimensional finite element analysis on the tensile processes of multi-fiber composites is conducted. The approximate 45° shear bands emanating from the matrix crack tip are found, being coincided with the experimental observations. The shear stress on the adjacent intact fiber/matrix interface is strongly influenced by the shear band and thus the stress concentration factor （SCF） changes obviously in the adjacent fibers. The distinct stress redistribution in the adjacent intact fibers implies the significant effect of the shear bands on the progressive fiber fracture initiation. As the inter-fiber spacing increases, the peak value of the SCF in the adjacent intact fiber decreases, whereas the overload zone becomes wider. The research has provided a helpful tool to evaluate the failure of fiber composites and optimize the composite performance through the proper selection of resin matrix properties and fiber volume fraction.展开更多
We study the buckling of a one fiber composite whose matrix stiffness is slightly dependent on the compressive force. We show that the equilibrium curves of the system exhibit a limit load when the induced stiffness p...We study the buckling of a one fiber composite whose matrix stiffness is slightly dependent on the compressive force. We show that the equilibrium curves of the system exhibit a limit load when the induced stiffness parameter gets bigger than a threshold. This limit load increases when the stiffness parameter is increasing and it is related to a possible localized path in the post-buckling domain. Such a change in the maximum load may be very desirable from a structural stand point.展开更多
Using polysulfone （PSF） hollow fiber ultrafiltration membranes as the substrate, sodium alginate （SA） and polyvinyl alcohol （PVA） blend solutions as the coating solution, and maleic anhydride （MAC） as the cros...Using polysulfone （PSF） hollow fiber ultrafiltration membranes as the substrate, sodium alginate （SA） and polyvinyl alcohol （PVA） blend solutions as the coating solution, and maleic anhydride （MAC） as the cross-linked agent, SAPVA/PSF hollow fiber composite membranes were prepared for the dehydration of ethanol-water. The effects of different sodium alginate concentration in the coating solutions and different operating temperatures on pervaporation performance were investigated. The experimental results showed that pervaporation performance of the SA-PVA/PSF composite membranes for ethanol-water solution exhibited a high separation factor although they had a relatively low permeation flux. As SA concentration in SA-PVA coating solution was 66.7% and the operating temperature was 40 ℃, SA-PVA/PSF hollow fiber composite membrane （PS4） had a separation factor of 886 and flux of 12.6 g/（m^2·h）. Besides, SA-PVA/PSF hollow fiber composite membranes （PS3 and PS4） were used for the investigation of the effect of ethanol concentration in the feed solution on pervaporation performance.展开更多
It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of sing...It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of single-phase earth fault current distribution and case verification were accomplished by using the loop method.Influences of some factors,such as single-phase earth fault location and ground resistance of poles,on short-circuit current distribution were discussed.Results show that:1) results of the loop method conform to those of double sided elimination method;2) the fault location hardly influences macro-distribution of short-circuit current.However,current near fault location is evidently influenced;and 3) the short-circuit current distribution is not so sensitive to the ground resistance of poles.展开更多
In order to explore the bonding failure mechanism of high modulus carbon fiber composite materials,the tensile experiment and finite element numerical simulation for single-lap and bevel-lap joints of unidirectional l...In order to explore the bonding failure mechanism of high modulus carbon fiber composite materials,the tensile experiment and finite element numerical simulation for single-lap and bevel-lap joints of unidirectional laminates are carried out,and the stress distributions,the failure modes,and the damage contours are analyzed. The analysis shows that the main reason for the failure of the single-lap joint is that the stress concentration of the ply adjacent to the adhesive layer is serious owing to the modulus difference,and the stress cannot be effectively transmitted along the thickness direction of the laminate. When the tensile stress of the ply exceeds its ultimate strength in the loading process,the surface fiber will fail. Compared with the single-lap joint,the bevel-lap joint optimizes the stress transfer path along the thickness direction,allows each layer of the laminate to share the load,avoids the stress concentration of the surface layer,and improves the bearing capacity of the bevel-lap joint. The improved bearing capacity of the bevellap joint is twice as much as that of the single-lap joint. The research in this paper provides a new idea for the subsequent study of mechanical properties of adhesively bonded composite materials.展开更多
文摘The automobile industry is the first to form a typical representative of the global industry in modern industry,with the increase of the national emphasis on the environment,the automobile industry was regarded as an important energy consumption and one of the sources of environmental pollution,the policy of energy conservation and emission reduction requirements for the automobile industry are becoming stricter over the years,energy conservation and emission reduction has becomes the main direction of product optimization in the automobile industry in recent years.Due of a series of excellent properties such as light weight and high strength,composite materials have become the main material for the development of lightweight vehicles.With the development of material technology and the update and iteration of manufacturing technology,composite materials are currently popular being adopted in the automotive field.
基金Project supported by the National Natural Science Foundation of China(Nos.12072003 and 12372003)Beijing Natural Science Foundation of China(No.1222001)。
文摘Owing to their high flexibility and directional actuation capabilities,macro fiber composites(MFCs)have attracted significant attention for the active control of structures,especially in the nonlinear vibration suppression applications for large-scale flexible structures.In this paper,an MFC-based self-feedback system is introduced for the active control of geometrically nonlinear steady-state forced vibrations in functionally graded carbon nanotube reinforced composite(FG-CNTRC)plates subject to transverse mechanical loads.Based on the first-order shear deformation theory and the von Kármán nonlinear strain-displacement relationship,the nonlinear vibration control equations of the plate with MFC sensor and actuator layers are derived by Hamilton's principle.These equations are discretized by the finite element method(FEM),and solved by the Newton-Raphson and direct iterative methods.A velocity feedback control algorithm is introduced,and the effects of the control gain and the MFC actuator position on the nonlinear vibration active control effectiveness are analyzed.Additionally,a nonlinear resonance analysis is carried out,considering the effects of carbon nanotube(CNT)volume fraction and distribution type.The results indicate that the intrinsic characteristics of the structures significantly influence the vibration behavior.Furthermore,the appropriate selections of control gain and MFC position are crucial for the effective active control of the structures.The present work provides a promising route of the active and efficient nonlinear vibration suppression for various thin-walled structures.
基金supported by the Key Research and Development Plan of Shaanxi Province(No.2023-GHZD-12)the Chinese Aeronautical Establishment Aeronautical Science Foundation(No.20230041053006)the National Natural Science Foundation of China(Nos.12472392 and 12172304).
文摘3D printing has emerged as an advanced manufacturing technique for carbon fiber reinforced composites and relevant structures that endure significant dynamic loads in engineering applications.The dynamic behavior of these materials,primarily influenced by the dynamic fiber pullout interface strength necessitates investigation into the rate-dependent fiber/matrix interfacial strength.This study modifies a Hopkinson tension bar to conduct dynamic pullout tests on a single fiber bundle,utilizing a low-impedance bar and an in-situ calibrated semiconductor strain gauge to capture weak stress signals.Stress equilibrium analyses are performed to validate the transient dynamic loading on single fiber bundle specimens.The results reveal that the fiber/matrix interfacial strength is rate-dependent,increasing with the loading rate,while remaining unaffected by the embedded length.Fracture microstructural analyses show minimal fiber pullout due to high interfacial stresses induced by longer embedded lengths.Lastly,suggestions are made for the efficient design of fiber pullout experiments.
基金financially supported by the National Natural Science Foundation of China (Nos.51973118, 22175121,52003160 and 22001175)Key-Area Research and Development Program of Guangdong Province (Nos.2019B010941001 and2019B010929002)+7 种基金the Natural Science Foundation of Guangdong Province (No.2020A1515010644)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(No.2019ZT08C642)Shenzhen Science and Technology Program (Nos.JCYJ20220818095810022, JSGGZD20220822095201003 and JCYJ20210324095412035)the start-up fund of Shenzhen University (No.000002110820)the Guangdong Natural Science Foundation (Nos.2022A1515011781 and2021A1515110086)Science and Technology Innovation Commission of Shenzhen,China (Nos.RCBS20200714114910141 and JCYJ20210324132816039)the Start-up Grant at Harbin Institute of Technology (Shenzhen),China (Nos.HA45001108 and HA11409049)Shenzhen Key Laboratory of Advanced Functional Carbon Materials Research and Comprehensive Application (No.ZDSYS20220527171407017)。
文摘The emerging biomass-based epoxy vitrimers hold great potential to fulfill the requirements for sustainable development of society.Since the existence of dynamic chemical bonds in vitrimers often reduces both the thermal and mechanical properties of epoxy resins, it is challenging to produce recyclable epoxy vitrimers with both excellent mechanical properties and good thermal stability. Herein, a monomer 4-(((5-(hydroxymethyl)furan-2-yl)methylene)amino)phenol(FCN) containing furan ring with potential to form high density of hydrogen bonding among repeating units is designed and copolymerized with glycerol triglycidyl ether to yield epoxy resin(FCN-GTE), which intrinsically has dual hydrogen bond networks, dynamic imine structure and resultant high performance. Importantly, as compared to the BPA-GTE, the FCN-GTE exhibits significantly improved mechanical properties owing to the increased density of hydrogen bond network and physical crosslinking interaction. Furthermore, density functional theory(DFT) calculation and in situ FTIR analysis is conducted to decipher the formation mechanism of hydrogen bond network. In addition, the FCN-GTE possesses superior UV shielding, chemical degradation, and recyclability because of the existence of abundant imine bonds. Notably, the FCN-GTE-based carbon fiber composites could be completely recycled in an amine solution.This study provides a facile strategy for synthesizing recyclable biomass-based high-performance epoxy vitrimers and carbon fiber composites.
文摘This study examines the penetration of 12.7 mm armor piercing incendiary projectiles into SiC ceramic-fiber composite target plates.By observing the recovered projectile and the overall damage morphology of the ceramic-fiber composite target plates.Additionally,multi-level screening and weighing of the recovered projectile and ceramic fragments revealed that the mass distribution of the projectile and ceramic fragments under different backing structures conforms to a powerlaw distribution.Experimental results indicate that for single laminate as the backing,the fragmentation of the projectile and ceramics is highest when T300 is the material.Incorporating a T300 transition layer between the SiC ceramic and aramid fibers(Kevlar)or ultra-high molecular weight polyethylene(UHMWPE)increases the fragmentation of the projectile and ceramics,leading to increased energy absorption.The projectile’s head mainly exhibits pulverized abrasive fragmentation,while larger projectile fragments primarily result from shear and tensile stress-induced shear-tensile failure fractures.The primary damage mode of ceramics under high-speed impact is the expansion of ceramic cones and radial cracks.The main form of damage in UHMWPE laminate is interlayer separation caused by tensile waves,permanent plastic deformation at the back protrusion,and perforation failure primarily due to shear waves.The damage mode of Kevlar laminate is similar to that of UHMWPE,with the distinction being that Kevlar laminate primarily exhibits perforation failure caused by tensile waves.Carbon fiber T300 laminate damage mainly consists of cross-shaped brittle fractures caused by shear waves.
基金Project(51072235) supported by the National Natural Science Foundation of ChinaProject(11JJ1008) supported by the Natural Science Foundation of Hunan Province,China+2 种基金Project(20110162110044) supported by the PhD Program Foundation of Ministry of Education of ChinaProject(7433001207) supported by Hunan Provincial Innovation Foundation for Postgraduate,ChinaProject(2001JF3215) supported by Hunan Provincial Science and Technology Plan,China
文摘Piezoelectric materials are capable of actuation and sensing and have been used in a wide variety of smart devices and structures.Active fiber composite and macro fiber composite are newly developed types of piezoelectric composites,and show superior properties to monolithic piezoelectric wafer due to their distinctive structures.Numerous work has focused on the performance prediction of the composites by evaluation of structural parameters and properties of the constituent materials with analytical and numerical methods.Various applications have been explored for the piezoelectric fiber composites,including vibration and noise control,health monitoring,morphing of structures and energy harvesting,in which the composites play key role and demonstrate the necessity for further development.
基金Project(51375369)supported by the National Natural Science Foundation of ChinaProject(SYG201137)supported by the Science and Technology Development Program of Suzhou,China
文摘To improve the manufacture efficiency and promote the application of composites in the automobile industry, a new composite forming method, thermal stamping, was discussed to form composite parts directly. Experiments on two typical stamping processes, thermal bending and thermal deep drawing, were conducted to investigate the forming behavior of composite sheets and analyze the influence of forming temperature on the formed composite part. Experimental results show that the locking angle for woven composite is about 30°. The bending load is smaller than 5 N in the stamping process and decreases with the increase of temperature. The optimal temperature to form the carbon fiber composite is 170 ℃. The die temperature distribution and the deformation of composite sheet were simulated by FEA software ABAQUS. To investigate the fiber movement of carbon woven fabric during stamping, the two-node three-dimension linear Truss unit T2D3 was chosen as the fiber element. The simulation results have a good agreement to the experimental results.
文摘In the maritime industry, cost-effective and lightweight Fiber Reinforced Polymer (FRP) composites offer excellent mechanical properties, design flexibility, and corrosion resistance. However, their reliability in harsh seawater conditions is a concern. Researchers address this by exploring three approaches: coating fiber surfaces, hybridizing fibers and matrices with or without nanofillers, and interply rearrangement. This study focuses on evaluating the synergistic effects of interply rearrangement of glass/carbon fibers and hybrid nanofillers, specifically Multi-walled carbon nanotubes (MWCNT) and Halloysite nanotubes (HNT). The aim is to enhance impact properties by minimizing moisture absorption. Hybrid nanocomposites with equal-weight proportions of two nanofillers: 0 wt.%, 1 wt.%, and 2 wt.% were exposed to seawater for 90 days. Experimental data was subjected to modelling through the application of Predictive Fick’s Law. The study found that the hybrid composite containing 2 wt.% hybrid nanofillers exhibited a 22.10% increase in impact performance compared to non-modified counterparts. After 90 days of seawater aging, the material exhibited enhanced resistance to moisture absorption (15.74%) and minimal reduction in impact strength (8.52%) compared to its dry strength, with lower diffusion coefficients.
文摘This paper shows a calculation model and a method for predicting the tensile strength of the random distributed short fiber composite.On the basis of Renjie Mao's model,the longitudinal tensile strength of the aligned short fiber composite is formulated.Considering the transverse tensile strength and in plane shear strength of the unidirectional fiber composite,and the stress transformation relations of two couples of axes,the stress of the unidirectional fiber composite when it is loaded at an arbitrary angle is obtained.With the aid of an equivalence relation,the calculation formulation of the tensile strength of the random short fiber reinforced composite is deduced.
文摘The morphological structure of various epoxies toughened with a special amorphous thermoplastic PEK-C and their carbon fiber composites were studied by using SEM. For both cases, phase separation and inversion took place to form fine epoxy-rich globules dispersing in the PEK-C matrix, in which the epoxy-rich phase had the absolutely higher volume fraction. The phase structure and the interfacial properties were also studied by means of FTIR, DSC, and DMTA as well. An accompanying mechanical determination revealed that an improved toughness was achieved both in the blend casts and in the carbon fiber composites. A composite structural model was hence suggested.
基金financially supported by the Joint Funds of the National Natural Science Foundation of China and Guangdong Province(No.U1134005)
文摘Natural rubber grafted maleic anhydride （NR-g-MAH） was synthesized by mixing maleic anhydride （MAH） and natural rubber （NR） in solid state in a torque rheometer using dicurnyl peroxide （DCP） as initiator. Then the self-prepared NR-g-MAH was used as a compatibilizer in the natural rubber/short nylon fiber composites. Both the fimctionalization of NR with MAH and the reaction between the modified rubber and the nylon fiber were confirmed by Fourier transform infrared spectroscopy （FTIR）. Composites with different nylon short fiber loadings （0, 5, 10, 15 and 20 phr） were compounded on a two-roll mill, and the effects of the NR-g-MAH on the tensile and thermal properties, fiber-rubber interaction, as well as the morphology of the natural rubber/short nylon fiber composites were investigated. At equal fiber loading, the NR-g-MAH compatibilized NR/short nylon fiber composites showed improved tensile properties, especially the tensile modulus at 100% strain which was about 1.5 times that of the corresponding un-compatibilized ones. The equilibrium swelling tests proved that the incorporation of NR-g-MAH increased the interaction between the nylon fibers and the NR matrix. The crosslink density measured with NMR techniques showed that the NR-g-MAH compatiblized composites had lower total crosslink density. The glass transition temperatures of the compatibilized composites were about 1 K higher than that of the corresponding un-compabilized ones. Morphology analysis of the NR/short nylon fiber composites confirmed NR-g-MAH improved interfacial bonding between the NR matrix and the nylon fibers. All these results signified that the NR-g-MAH could act as a good compatilizer of NR/short nylon fiber composites and had a potential for wide use considering its easy to be prepared and compounded with the composites.
基金financially supported by the National Natural Science Foundation of China(No.51872232)the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China(No.136-QP-2015)+4 种基金the“111”project of China(No.B08040)the National Training Program of Innovation and Entrepreneurship for Undergraduates(No.S202010699336)the Joint Funds of the National Natural Science Foundation of China(No.U21B2067)the Key Scientific and Technological Innovation Research Team of Shaanxi Province(No.2022TD-31)the Key R&D Program of Shaanxi Province(No.2021ZDLGY14-04).
文摘Carbon fiber(C_(f))reinforced pyrolytic carbon(PyC)composites simultaneously possessing robust mechanical strength,excellent friction performances and outstanding anti-ablation properties are demanded for advanced aerospace applications.Efficient architecture design and optimization of composites are promi-nent yet remain high challenging for realizing the above requirements.Herein,binary reinforcements of networked silicon nitride nanowires(Si_(3)N_(4) nws)and interconnected graphene(GE)have been successfully constructed into C f/PyC by precursor impregnation-pyrolysis and chemical vapor deposition.Notably,net-worked Si_(3)N_(4) nws are uniformly distributed among the carbon fibers,while interconnected GE is firmly rooted on the surface of both networked Si_(3)N_(4) nws and carbon fibers.In the networked Si_(3)N_(4) nws and interconnected GE reinforced C_(f)/PyC,networked Si_(3)N_(4) nws significantly boost the cohesion strength of PyC,while GE markedly improves the interface bonding of both Si_(3)N_(4) nws/PyC and fiber/PyC.Benefiting from the synergistic reinforcement effect of networked Si_(3)N_(4) nws and interconnected GE,the C_(f)/PyC have a prominent enhancement in mechanical(shear and compressive strengths increased by 119.9% and 52.84%,respectively)and friction(friction coefficient and wear rate reduced by 25.40% and 60.10%,respectively)as well as anti-ablation(mass ablation rate and linear ablation rate decreased by 71.25% and 63.01%,respectively).This present strategy for networked Si_(3)N_(4) nws and interconnected GE reinforced C_(f)/PyC provides a dominant route to produce mechanically robust,frictionally resisting and ablatively resistant materials for use in advanced aerospace applications.
基金Supported by the Natural Science Foundation of Hebei Province under Grant No E2012201084the National University Students’ Innovative Training Program under Grant No 201410075004
文摘Realizing the accurate characterization for the dynamic damage process is a great challenge. Here we carry out testing simultaneously for dynamic monitoring and acoustic emission （AE） statistical analysis towards fiber composites under mode-Ⅱ delamination damage. The load curve, AE relative energy, amplitude distribution, and amplitude spectrum are obtained and the delamination damage mechanism of the composites is investigated by the microscopic observation of a fractured specimen. The results show that the micro-damage accumulation around the crack tip region has a great effect on the evolutionary process of delamination. AE characteristics and amplitude spectrum represent the damage and the physical mechanism originating from the hierarchical microstructure. Our finding provides a novel aud feasible strategy to simultaneously evaluate the dynamic response and micro-damage mechanism for fiber composites.
基金supported by the National Science Foundation of China(No.51571033)supported in part by the National Natural Science Foundation of China under Grant No.11521062。
文摘The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and ballistic test were performed to the prepared composites.After the tests,the specimens were recovered and analyzed for micromorphology.Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC.Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC,but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC.For the ballistic test,it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests,microscopic analysis of the specimens was applied,and their failure mechanism was discussed.The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage.Although delamination damage can be found in the WBFC under the above loading conditions,the degree of delamination is far less than that of the UBFC.
基金financially supported by the National Key Basic Research Program of China(No.2010CB631102)the National Natural Science Foundation of China(Nos.51173100 and 51373090)the Natural Science Foundation of Shandong Province(No.JQ201016)
文摘A constitutive model is constructed to consider the resin matrix post-yield softening and progressive hardening behaviors. A user-defined material mechanical behavior （UMAT） subroutine is created, then the non-linear three-dimensional finite element analysis on the tensile processes of multi-fiber composites is conducted. The approximate 45° shear bands emanating from the matrix crack tip are found, being coincided with the experimental observations. The shear stress on the adjacent intact fiber/matrix interface is strongly influenced by the shear band and thus the stress concentration factor （SCF） changes obviously in the adjacent fibers. The distinct stress redistribution in the adjacent intact fibers implies the significant effect of the shear bands on the progressive fiber fracture initiation. As the inter-fiber spacing increases, the peak value of the SCF in the adjacent intact fiber decreases, whereas the overload zone becomes wider. The research has provided a helpful tool to evaluate the failure of fiber composites and optimize the composite performance through the proper selection of resin matrix properties and fiber volume fraction.
文摘We study the buckling of a one fiber composite whose matrix stiffness is slightly dependent on the compressive force. We show that the equilibrium curves of the system exhibit a limit load when the induced stiffness parameter gets bigger than a threshold. This limit load increases when the stiffness parameter is increasing and it is related to a possible localized path in the post-buckling domain. Such a change in the maximum load may be very desirable from a structural stand point.
基金Project supported by the National Basic Research Program of China (Grant No.2003CB615705)
文摘Using polysulfone （PSF） hollow fiber ultrafiltration membranes as the substrate, sodium alginate （SA） and polyvinyl alcohol （PVA） blend solutions as the coating solution, and maleic anhydride （MAC） as the cross-linked agent, SAPVA/PSF hollow fiber composite membranes were prepared for the dehydration of ethanol-water. The effects of different sodium alginate concentration in the coating solutions and different operating temperatures on pervaporation performance were investigated. The experimental results showed that pervaporation performance of the SA-PVA/PSF composite membranes for ethanol-water solution exhibited a high separation factor although they had a relatively low permeation flux. As SA concentration in SA-PVA coating solution was 66.7% and the operating temperature was 40 ℃, SA-PVA/PSF hollow fiber composite membrane （PS4） had a separation factor of 886 and flux of 12.6 g/（m^2·h）. Besides, SA-PVA/PSF hollow fiber composite membranes （PS3 and PS4） were used for the investigation of the effect of ethanol concentration in the feed solution on pervaporation performance.
文摘It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of single-phase earth fault current distribution and case verification were accomplished by using the loop method.Influences of some factors,such as single-phase earth fault location and ground resistance of poles,on short-circuit current distribution were discussed.Results show that:1) results of the loop method conform to those of double sided elimination method;2) the fault location hardly influences macro-distribution of short-circuit current.However,current near fault location is evidently influenced;and 3) the short-circuit current distribution is not so sensitive to the ground resistance of poles.
文摘In order to explore the bonding failure mechanism of high modulus carbon fiber composite materials,the tensile experiment and finite element numerical simulation for single-lap and bevel-lap joints of unidirectional laminates are carried out,and the stress distributions,the failure modes,and the damage contours are analyzed. The analysis shows that the main reason for the failure of the single-lap joint is that the stress concentration of the ply adjacent to the adhesive layer is serious owing to the modulus difference,and the stress cannot be effectively transmitted along the thickness direction of the laminate. When the tensile stress of the ply exceeds its ultimate strength in the loading process,the surface fiber will fail. Compared with the single-lap joint,the bevel-lap joint optimizes the stress transfer path along the thickness direction,allows each layer of the laminate to share the load,avoids the stress concentration of the surface layer,and improves the bearing capacity of the bevel-lap joint. The improved bearing capacity of the bevellap joint is twice as much as that of the single-lap joint. The research in this paper provides a new idea for the subsequent study of mechanical properties of adhesively bonded composite materials.
