This study demonstrated the potential for customizing the desired properties of the Co_(18.5)Cr_(12)Fe_(55)Ni_(9)Mo_(3.5)C_(2)(at.%)ferrous medium-entropy alloy by manipulating the deformation-induced martensite trans...This study demonstrated the potential for customizing the desired properties of the Co_(18.5)Cr_(12)Fe_(55)Ni_(9)Mo_(3.5)C_(2)(at.%)ferrous medium-entropy alloy by manipulating the deformation-induced martensite transformation(DIMT)behavior at liquid nitrogen temperature.This was achieved by modifying various initial microstructures through annealing at temperatures ranging from 900 to 1200℃.The variations in DIMT kinetics were analyzed based on two main factors.(1)Inducing carbide precipitation by annealing at 900 and 1000°C results in changes in the composition within the matrix,which may affect the stability of the face-centered cubic phase.Samples with a higher volume fraction of the carbide precipitates exhibit lower-GFCC→BCC and faster DIMT kinetics.(2)The onset and kinetics of DIMT are also affected by the use of martensite nucleation sites,which may vary depending on the presence of non-recrystallized regions or the grain size.In fine-grained structures,martensite primarily nucleated in the non-recrystallized regions and grain boundaries.However,in coarse-grained microstructures,martensite mainly nucleated along the in-grain shear bands and their intersections.This precise control of the microstructure results in superior properties.The samples annealed at 900 and 1000°C with carbide precipitates and fine grains exhibit ultrahigh ultimate tensile strength,which may reach elevated values up to∼1.8 GPa,while those annealed at 1100 and 1200°C with larger grains and no precipitates exhibit a uniform elongation that exceeds 100%.展开更多
In order to realize the full resource utilization of ferronickel slag(FNS)in cement-based materials,this paper studied the influences of mechanical grinding activation on the physical and chemical properties and react...In order to realize the full resource utilization of ferronickel slag(FNS)in cement-based materials,this paper studied the influences of mechanical grinding activation on the physical and chemical properties and reactivity of ferrous extraction tailing of nickel slag(FETNS).Four grinding processes of 5,10,20 and 30 min were set up to evaluate the influence of grinding process on the physical and chemical properties of FETNS with the aid of BET,XRD,Rietveld analysis and particle size distribution.The cement-FETNS composite cementitious material was prepared by replacing cement with 0%,10%,15%,20%,25%and 30%FETNS.The influence of FETNS fineness and content on the properties of composite cementitious system were characterized by mechanical properties,reaction products,early hydration process and pore structure characteristics.The results show that the grinding process can effectively improve the pozzolanic activity of FETNS.The compressive strength of FETNS-M_(30)paste is higher than that of FETNS-M_(5) paste in the early and late stages,and the later strength is higher than that of the baseline group when the content of FETNS-M_(30)is 10%-25%.The pozzolanic activity of FETNS-M_(30)powder is significantly improved and higher than that of FETNS-M_(5) powder.Under the same content,the Ca/Si ratio of C-S-H gel in FETNS-M_(30)paste is small,and the degree of silicate polymerization is higher.When the FETNS-M_(30)content is 10%,the proportions of favorable pores d<50 nm(harmless pores and less-harmful pores)of FETNS-M_(5) paste and FETNS-M_(30)paste is 95.3%and 95.4%,respectively,indicating a denser pore structure of the FETNS-M_(30)paste.展开更多
In order to explore the leaching law of different elements in the composite cementitious system composed of ferrous extraction tailing of nickel slag(FETNS)and ordinary Portland cement(OPC),element leaching test under...In order to explore the leaching law of different elements in the composite cementitious system composed of ferrous extraction tailing of nickel slag(FETNS)and ordinary Portland cement(OPC),element leaching test under different influencing factors was designed with the aid of ICP-OES,XRD,and SEM-EDS.The experimental results show that,with the extension of leaching time,the continuous hydration reaction in the system enables the leaching amount of Si,Al,Mg,and Ca elements to show an overall downward trend.In the alkaline environment,the more sufficient hydration reaction consumes more soluble elements,resulting in a significantly smaller leaching amount than that in the neutral environment.Temperature is also an important factor affecting the leaching of elements.The rise of temperature promotes the dissolution of amorphous phases Si,Al,and Mg in the system,leading to increased leaching amount and higher consumption of C_(2)S and C_(3)S,generating more reaction products.In addition,the content and fineness of FETNS also have a significant effect on the element leaching of the composite cementitious system.More importantly,this paper clarifies the leaching safety of internal heavy metal elements when FETNS is used under the above conditions,which provides a scientific guarantee for the safe and efficient application of FETNS in building materials.展开更多
MgO participates in all stages of sintering,pelletizing,and blast furnace ironmaking,and synergistically optimizing the distribution of MgO in ferrous burden can effectively enhance the interaction within the ferrous ...MgO participates in all stages of sintering,pelletizing,and blast furnace ironmaking,and synergistically optimizing the distribution of MgO in ferrous burden can effectively enhance the interaction within the ferrous burdens and optimize the softening-melting properties of the mixed burden.Magnesium-containing pellets mixed with low-MgO sinter or mixed with high-MgO sinter in the blast furnace ferrous burden structure have opposite softening-melting performance laws.When the structure of the ferrous burden is magnesium-containing pellets mixed with low-MgO sinter,the magnesium-containing pellets can enhance the interaction of the ferrous burden in the process of softening-melting,which can optimize the composition of the slag phase and improve the slag liquidity.When the structure of the ferrous burden is magnesium-containing pellets mixed with high-MgO sinter,the magnesium-containing pellets weaken the interaction of the ferrous burden in the process of softening-melting,increase the content of the high melting point solid-phase particles in the slag,lead to an increase in the viscosity of the slag and difficult separation of the slag and iron,and decrease the permeability of the charge layer.Therefore,to ensure good permeability of the mixed burden,the following measures are suggested:optimizing the MgO distribution of the ferrous burden,reducing the MgO content of the sinter to 1.96 wt.%,increasing the MgO content of the pellets to 1.03-1.30 wt.%,controlling the MgO/Al_(2)O_(3) ratio of the mixed burden within 1.15-1.32,narrowing the position of the cohesive zone,and maintaining an S value(permeability index)of approximately 150 kPa℃.展开更多
Novel coal gangue-based persulfate catalyst(CG-FeCl_(2))was successfully synthesized by the means of calcinating under nitrogen atmosphere with the addition of ferrous chloride tetrahydrate(FeCl_(2)·_(4)H_(2)O).T...Novel coal gangue-based persulfate catalyst(CG-FeCl_(2))was successfully synthesized by the means of calcinating under nitrogen atmosphere with the addition of ferrous chloride tetrahydrate(FeCl_(2)·_(4)H_(2)O).The phase transformation of the prepared materials and gas products during the heating process are thoroughly investigated.It is suggested that ferrous chloride participated in the phase transformation and formed Si-O-Fe bonds.And the main gaseous products are H_(2)O,H_(2),and HCl during the heating process.Besides,the ability of CG-FeCl_(2) to activate peroxymonosulfate(PMS)for catalytic degradation of polycyclic aromatic hydrocarbons(PAHs)and phenol was deeply studied.More than 95%of naphthyl,phenanthrene and phenol were removed under optimizied conditions.In addition,1O_(2),·OH,and SO_(4)·−were involved in the CG-FeCl_(2)/PMS system from the free radical scavenging experiment,where 1O_(2) played a major role during the oxidation process.Furthermore,CG-FeCl_(2)/PMS system exhibited superior stability in a relatively wide pH range and the presence of common anion from related degradation experiments.Overall,the novel CG-FeCl_(2) is an efficient and environmentally friendly catalyst,displaying potential application prospect in the field of PAHs and phenol-contaminated wastewater treatment.展开更多
Magnetite concentrate was recovered from ferrous sulphate by co-precipitation and magnetic separation. In co-precipitation process, the effects of reaction conditions on iron recovery were studied, and the optimal rea...Magnetite concentrate was recovered from ferrous sulphate by co-precipitation and magnetic separation. In co-precipitation process, the effects of reaction conditions on iron recovery were studied, and the optimal reaction parameters are proposed as follows： n（CaO）/n（Fe2＋） 1.4：1, reaction temperature 80 ℃, ferrous ion concentration 0.4 mol/L, and the final mole ratio of Fe3＋ to FJ＋ in the reaction solution 1.9-2.1. In magnetic separation process, the effects of milling time and magnetic induction intensity on iron recovery were investigated. Wet milling played an important part in breaking the encapsulated magnetic phases. The results showed that the mixed product was wet-milled for 20 min before magnetic separation, the grade and recovery rate of iron in magnetite concentrate were increased from 51.41% and 84.15% to 62.05% and 85.35%, respectively.展开更多
In order to develop a low-cost approach for separating macro amounts of Mo and W, the effects of parameters on the separation using FeSO4 as precipitation reagent were studied. The results show that the optimum reacti...In order to develop a low-cost approach for separating macro amounts of Mo and W, the effects of parameters on the separation using FeSO4 as precipitation reagent were studied. The results show that the optimum reaction temperature is 10 °C, and the separation factor does not further improve after a reaction time of 7 h. Moreover, slow dropping speed of the precipitation reagent is beneficial for improving the separation efficiency. When the H＋/W molar ratio is below 1/1, the addition of acid to a neutral solution is favorable to the separation. For the solution with an ammonium concentration below 3 mol/L, the separation factor is high due to the high W-precipitation rate. Furthermore, the method is also effective when it is applied to industrial solution containing some other impurities. All these indicate the ferrous salts have great potential for removing W from Mo on a commercial scale.展开更多
Polyethylene (PE) films with additives consisting mainly of oleic acid and ferrous ions were subjected to accelerated degradation at simulated composting temperatures.Based on Fourier transform infrared spectroscopy a...Polyethylene (PE) films with additives consisting mainly of oleic acid and ferrous ions were subjected to accelerated degradation at simulated composting temperatures.Based on Fourier transform infrared spectroscopy and measurements of mechanical properties and viscosity average molecular weight,the degradation of the films was characterized and the degradation mechanism was discussed.The films containing additives with ferrous ions represent considerable decreases in molecular weight,and the carbonyl groups and hydroperoxides in the aging films show different trends of increase with the aging time.These results indicate that the ferrous ion plays an important role in the degradation of PE films and accelerates the degradation of PE.展开更多
The practice ofin-situ leaching of the ion-adsorption type rare earths ore with ammonium sulfate could only leach most of rare earth in ion-exchangeable phase,but not the colloidal sediment phase.Therefore,the reducti...The practice ofin-situ leaching of the ion-adsorption type rare earths ore with ammonium sulfate could only leach most of rare earth in ion-exchangeable phase,but not the colloidal sediment phase.Therefore,the reduction leaching of rare earth from the ion-adsorption type rare earths ore with ferrous sulfate was innovatively put forward.The soak leaching process and the column leaching process were investigated in the present study.It was determined that ion-exchangeable phase could be released,and part of colloidal sediment phase rare earth could be reduction leached by the cations with reduction properties.The mechanism of reduction leaching was discussed with the Eh-pH diagram of cerium.Moreover,the stronger reduction of reductive ions,the greater acidity of leaching agent solution,and the higher reductive ion concentration,could result in the higher rare earth efficiency and the bigger ce-rium partition in the leaching liquor.In the ferrous sulfate column leaching process,the rare earth leaching rate and the rare earth effi-ciency were a little higher than with(NH4)2SO4 agent,and the rare earth efficiency and the partitioning of cerium in leaching liquor could be about 102%and 5.31%,respectively.However,the ferrous sulfate leaching process revealed some problems,so compound leaching with magnesium sulfate and a small amount of ferrous sulfate was proposed to an excellent alternative leaching agent for further studies,which may realize efficiency extraction and be environment-friendly.展开更多
Ferrous and manganese ions, as essential elements, significantly affect the synthesis of Haem-C, which participates in the energy metabolism and proliferation of anammox bacteria. In this study, two identical sequenci...Ferrous and manganese ions, as essential elements, significantly affect the synthesis of Haem-C, which participates in the energy metabolism and proliferation of anammox bacteria. In this study, two identical sequencing batch biofilm reactors were used to investigate the effects of ferrous and manganese ions on nitrogen removal efficiency and the potential of metal ions serving as electron donor/acceptors in the anammox process. Fluorescence in situ hybridization analysis was applied to investigate the microbial growth. Results showed that the nitrogen removal increased at high concentrations of Fe2＋ and Mn2＋ and the maximum removal efficiency was nearly 95% at Fe2＋ 0.08 mmol/L and Mn2＋ 0.05 mmol/L, which is nearly 15% and 8% higher than at the lowest Fe2＋ and Mn2＋ concentrations （0.04 and 0.0125 mmol/L）. The stabilities of the anammox reactor and the anammox bacterial growth were also enhanced with the elevated Fe2＋ and Mn2＋ concentrations. The Fe2＋ and Mn2＋were consumed by anammox bacteria along with the removal of ammonia and nitrite. Stoichiometry analysis showed Fe2＋ could serve as an electron donor for NO3-N in the anammox process. Nitrate could be reduced with Fe2＋ serving as the electron donor in the anammox system, which causes the value of NO^-N/NH4-N to decrease with the increasing of N-removal efficiency.展开更多
A great amount of ferrous tailings and slag cause severe damage to the ecological environment, which must be reclaimed and utilized. The composition, type, and characteristics of ferrous tailings and slag in China wer...A great amount of ferrous tailings and slag cause severe damage to the ecological environment, which must be reclaimed and utilized. The composition, type, and characteristics of ferrous tailings and slag in China were introduced. The research status and the application outlook of glass ceramics made from ferrous tailings and slag were discussed. Glass ceramics made from ferrous tailings and slag can be applied to various fields, and it will be environmentally conscious materials in the 21st century.展开更多
Chromium and/or arsenate removal by Fe（Ⅱ） as a function of pH, Fe（Ⅱ） dosage and initial Cr（Ⅵ）/As（Ⅴ） ratio were examined in batch tests. The presence of arsenate reduced the removal efficiency of chromium b...Chromium and/or arsenate removal by Fe（Ⅱ） as a function of pH, Fe（Ⅱ） dosage and initial Cr（Ⅵ）/As（Ⅴ） ratio were examined in batch tests. The presence of arsenate reduced the removal efficiency of chromium by Fe（Ⅱ）, while the presence of chromate significantly increased the removal efficiency of arsenate by Fe（Ⅱ） at pH 6-8, In the absence of arsenate, chromium removal by Fe（Ⅱ） increased to a maximum with increasing pH from 4 to 7 and then decreased with a further increase in pH. The increment in Fe（Ⅱ） dosage resulted in an improvement in chromium removal and the improvement was more remarkable under alkaline conditions than that under acidic conditions. Chromium removal by Fe（Ⅱ） was reduced to a larger extent under neutral and alkaline conditions than that under acidic conditions due to the presence of 10 μtmol/L arsenate. The presence of 20 μmol/L arsenate slightly improved chromium removal by Fe（Ⅱ） at pH 3.9-5,8, but had detrimental effects at pH 6.7-9.8. Arsenate removal was improved significantly at pH 4-9 due to the presence of 10μmol/L chromate at Fe（Ⅱ） dosages of 20-60 μmol/L. Elevating the chromate concentration from 10 to 20μmol/L resulted in a further improvement in arsenate removal at pH 4.0-4.6 when Fe（Ⅱ） was dosed at 30-60 μmol/L.展开更多
To study the effects of selenium on root oxidizing ability and yield of rice under ferrous stress, a pot culture experiment was conducted, the activity of glutathione peroxidase (GSH-Px) and the concentration of malon...To study the effects of selenium on root oxidizing ability and yield of rice under ferrous stress, a pot culture experiment was conducted, the activity of glutathione peroxidase (GSH-Px) and the concentration of malonaldelyde (MDA) were determined. The root oxidizing ability and yield characters of rice were examined. Results showed that appropriate amount of Se enhanced the activity of glutathione peroxidase and the oxidizing ability of rice roots significantly, reduced the concentration of MDA, increased 1000-grain weight of rice, F = 26.96**, decreased empty and blighted grain rate, increased the rice yield, F = 11.53**, and enhanced the rice resistance under ferrous stress.展开更多
The transformation behavior of ferrous sulfate was examined during hematite precipitation for iron removal in hydrometallurgical zinc.Specifically,the effects of the method used for oxygen supply(pre-crystallization o...The transformation behavior of ferrous sulfate was examined during hematite precipitation for iron removal in hydrometallurgical zinc.Specifically,the effects of the method used for oxygen supply(pre-crystallization or pre-oxidation of ferrous sulfate)and temperature(170–190℃)on the redissolution and oxidation–hydrolysis of ferrous sulfate were studied.The precipitation characteristics and phase characterization of the hematite product were investigated.The results showed that the solubility of ferrous sulfate was considerably lower at elevated temperatures.The dissolution behavior of ferrous sulfate crystals was influenced by both the concentrations of free acid and zinc sulfate and the oxydrolysis of ferrous ions.Rapid oxydrolysis of ferrous ions may serve as the dissolution driving force.Hematite precipitation proceeded via the following sequential steps:crystallization,redissolution,oxidation,and precipitation of ferrous sulfate.The dissolution of ferrous sulfate was slow,which helped to maintain a low supersaturation environment,thereby affording the production of high-grade hematite.展开更多
The exploitation of a highly selective and sensitive probe to detect both cancer marker and metal ion is of great importance.In this work,the "one stone two bird" agent of 1,10-phenanthroline(phen) is design...The exploitation of a highly selective and sensitive probe to detect both cancer marker and metal ion is of great importance.In this work,the "one stone two bird" agent of 1,10-phenanthroline(phen) is designed to disrupt the polymeric lanthanide MOFs(LnMOFs,[Ln(CHO_(2))_(3)]n,Ln=Tb,la;Eu,1 b,CHO_(2)=formic acid) {[Ln(CHO_(2))_(4)·(C_(2) H_(8) N)]n,Ln=Y,2 a;Gd,2 b;Dy,2 c,C_(2)H_(8) N=dimethylamine}) into a soluble mononuclear species [Ln(phen)_(2)(NO_(3))_(3),Ln=Tb,3 a;Eu,3 b] as well as to provide an antenna for efficient photons absorption,resulting in an ultra-high luminescence quantum yield(QY,90%) europium complex.The luminescence QY is among the highest record of monomeric(zero-dimensional) lanthanide complexes.Furthermore,mononuclear Tb3+complex(3 a) functions as a multiplex sensor towards both Fe^(2+)and cancer marker of 5-hydroxyindole-3-acetic acid(5-HIAA).Importantly,the limit of detection(LOD)for sensing 5-HIAA is an ultra-sensitive value of 1 × 10 s mol/L,which is even lower than that necessary for the early diagnosis of carcinoid tumors.More interestingly,sensing results in simulated urine reveals that 3 a has potential application for early diagnosis in the clinic.展开更多
The softening and melting behavior of sinter, pellet and mixed burden was researched through high tem- perature reaction tests under load simulating traditional blast furnace （T-BF） and oxygen blast furnace （OBF） ...The softening and melting behavior of sinter, pellet and mixed burden was researched through high tem- perature reaction tests under load simulating traditional blast furnace （T-BF） and oxygen blast furnace （OBF） condi- tions. The results indicated that compared with T-BF, the softening zone of sinter and pellet became wide, but the melting zone became narrow in OBF. The permeabilities of both sinter and pellet were improved in OBF. Under the condition of OBF, the temperature of softening zone of mixed burden was increased by 63 K, but the temperature of melting zone was decreased by 76 K. Therefore, the permeability of material layer was significantly improved. This was mainly caused by the change of the melting behavior of pellet. In addition, the quality Of dripping iron in OBF was much better than that of T-BF.展开更多
The effect of hydraulic retention time (HRT) and pH on the biooxidation of ferrous iron during simulated acid mine drainage (AMD) treatment was investigated.The simulated AMD was highly acidic (pH 2.5), rich in iron (...The effect of hydraulic retention time (HRT) and pH on the biooxidation of ferrous iron during simulated acid mine drainage (AMD) treatment was investigated.The simulated AMD was highly acidic (pH 2.5), rich in iron (about 1700 mg/L) and copper (about 200 mg/L), and contained high concentrations of sulfate (about 4700 mg/L).The biooxidation of ferrous iron was studied in a laboratory-scale upflow packed bed bioreactor (PBR).The HRT was shortened stepwise from 40 h to 20 h, 13 h, and 8 h under the acidic environment at a pH value of 2.2.Then, the influent pH value was changed from 2.2 to 1.2 at a constant suitable HRT.Physiochemical and microbial community structure analyses were performed on water samples and stuffing collected from the bioreactor under different conditions.The results indicate that the efficiency of ferrous iron oxidation gradually decreased with the decrease of HRT, and when the HRT exceeded 13 h, ferrous iron in AMD was almost completely oxidized.In addition, the best efficiency of ferrous iron oxidation was achieved at the influent pH value of 1.8.Microbial community structure analyses show that Leptospirillum is the predominant genus attached in the bioreactor, and low influent pH values are suitable for the growth of Leptospirillum.展开更多
In the interest of accelerating aniline degradation, Fe2+ and chelated Fe2+ activated persulfate oxidations were investigated in neutral pH condition. Three kinds of chelating agents were selected including citric aci...In the interest of accelerating aniline degradation, Fe2+ and chelated Fe2+ activated persulfate oxidations were investigated in neutral pH condition. Three kinds of chelating agents were selected including citric acid, oxalic acid and ethylenediamine tetraaceatate(EDTA) to maintain available Fe2+. The results indicate that the concentration of chelating agent and ferrous ion didn't follow a linear relationship with the degradation rate of aniline. A 1/1 ratio of chelating agent/Fe2+ results in a higher degradation rate compared to the results by other ratios. The oxidation enhancement factor using oxalic acid was found to be relatively low. In contrast, citric acid is more suitable chelating agent in the ferrous iron activated persulfate system and aniline exhibits a highest degradation with a persulfate/Fe2+/citric acid/aniline molar ratio of 50/25/25/1 compared to other molar ratios.展开更多
Intensifying effects of ferrous sulfate and pyrite on bioleaching of low-grade molybdenite concentrate were studied in this paper. The experimental results show that the oxidation dissolution of molybdenite can be acc...Intensifying effects of ferrous sulfate and pyrite on bioleaching of low-grade molybdenite concentrate were studied in this paper. The experimental results show that the oxidation dissolution of molybdenite can be accelerated with the addition of either ferrous sulfate or pyrite in bi- oleaching medium. Pyrite has better enhancing effect than ferrous sulfate, and the highest molybdenum leaching rate in pyrite-added solutions is 20.85 %, increasing by 12.64 % compared with that in 9 K leaching system. Molybdenum leaching rate does not increase linearly with the increase of the addition of either ferrous sulfate or pyrite in each type solution. Great amounts of [NH4Fe3（SO4）2（OH）6] and [KFe3（SO4）2（OH）6] with different morphologies will be deposited on molybdenite ores when the additions of Fe from ferrous sulfate or pyrite exceed that from 9 K leaching system by 0.5 times, and these deposits hinder the oxidation dissolution of molybdenite to some extent.展开更多
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(No.RS-2023-00281246).
文摘This study demonstrated the potential for customizing the desired properties of the Co_(18.5)Cr_(12)Fe_(55)Ni_(9)Mo_(3.5)C_(2)(at.%)ferrous medium-entropy alloy by manipulating the deformation-induced martensite transformation(DIMT)behavior at liquid nitrogen temperature.This was achieved by modifying various initial microstructures through annealing at temperatures ranging from 900 to 1200℃.The variations in DIMT kinetics were analyzed based on two main factors.(1)Inducing carbide precipitation by annealing at 900 and 1000°C results in changes in the composition within the matrix,which may affect the stability of the face-centered cubic phase.Samples with a higher volume fraction of the carbide precipitates exhibit lower-GFCC→BCC and faster DIMT kinetics.(2)The onset and kinetics of DIMT are also affected by the use of martensite nucleation sites,which may vary depending on the presence of non-recrystallized regions or the grain size.In fine-grained structures,martensite primarily nucleated in the non-recrystallized regions and grain boundaries.However,in coarse-grained microstructures,martensite mainly nucleated along the in-grain shear bands and their intersections.This precise control of the microstructure results in superior properties.The samples annealed at 900 and 1000°C with carbide precipitates and fine grains exhibit ultrahigh ultimate tensile strength,which may reach elevated values up to∼1.8 GPa,while those annealed at 1100 and 1200°C with larger grains and no precipitates exhibit a uniform elongation that exceeds 100%.
基金Funded by the Science and Technology Program of Gansu Province(Nos.25CXGA070,24JRRA213)the National Natural Science Foundation of China(Nos.52468036,52178216,U21A20150)。
文摘In order to realize the full resource utilization of ferronickel slag(FNS)in cement-based materials,this paper studied the influences of mechanical grinding activation on the physical and chemical properties and reactivity of ferrous extraction tailing of nickel slag(FETNS).Four grinding processes of 5,10,20 and 30 min were set up to evaluate the influence of grinding process on the physical and chemical properties of FETNS with the aid of BET,XRD,Rietveld analysis and particle size distribution.The cement-FETNS composite cementitious material was prepared by replacing cement with 0%,10%,15%,20%,25%and 30%FETNS.The influence of FETNS fineness and content on the properties of composite cementitious system were characterized by mechanical properties,reaction products,early hydration process and pore structure characteristics.The results show that the grinding process can effectively improve the pozzolanic activity of FETNS.The compressive strength of FETNS-M_(30)paste is higher than that of FETNS-M_(5) paste in the early and late stages,and the later strength is higher than that of the baseline group when the content of FETNS-M_(30)is 10%-25%.The pozzolanic activity of FETNS-M_(30)powder is significantly improved and higher than that of FETNS-M_(5) powder.Under the same content,the Ca/Si ratio of C-S-H gel in FETNS-M_(30)paste is small,and the degree of silicate polymerization is higher.When the FETNS-M_(30)content is 10%,the proportions of favorable pores d<50 nm(harmless pores and less-harmful pores)of FETNS-M_(5) paste and FETNS-M_(30)paste is 95.3%and 95.4%,respectively,indicating a denser pore structure of the FETNS-M_(30)paste.
基金Funded by the Science and Technology Program of Gansu Province(Nos.23JRRA799 and 24JRRA213)the National Natural Science Foundation of China(Nos.52178216,52008196,and U21A20150)。
文摘In order to explore the leaching law of different elements in the composite cementitious system composed of ferrous extraction tailing of nickel slag(FETNS)and ordinary Portland cement(OPC),element leaching test under different influencing factors was designed with the aid of ICP-OES,XRD,and SEM-EDS.The experimental results show that,with the extension of leaching time,the continuous hydration reaction in the system enables the leaching amount of Si,Al,Mg,and Ca elements to show an overall downward trend.In the alkaline environment,the more sufficient hydration reaction consumes more soluble elements,resulting in a significantly smaller leaching amount than that in the neutral environment.Temperature is also an important factor affecting the leaching of elements.The rise of temperature promotes the dissolution of amorphous phases Si,Al,and Mg in the system,leading to increased leaching amount and higher consumption of C_(2)S and C_(3)S,generating more reaction products.In addition,the content and fineness of FETNS also have a significant effect on the element leaching of the composite cementitious system.More importantly,this paper clarifies the leaching safety of internal heavy metal elements when FETNS is used under the above conditions,which provides a scientific guarantee for the safe and efficient application of FETNS in building materials.
基金financial support of the National Natural Science Foundation of China (52174291)the National Natural Science Foundation of China Youth Fund (52204335)the Beijing New-Star of Science and Technology (Z211100002121115).
文摘MgO participates in all stages of sintering,pelletizing,and blast furnace ironmaking,and synergistically optimizing the distribution of MgO in ferrous burden can effectively enhance the interaction within the ferrous burdens and optimize the softening-melting properties of the mixed burden.Magnesium-containing pellets mixed with low-MgO sinter or mixed with high-MgO sinter in the blast furnace ferrous burden structure have opposite softening-melting performance laws.When the structure of the ferrous burden is magnesium-containing pellets mixed with low-MgO sinter,the magnesium-containing pellets can enhance the interaction of the ferrous burden in the process of softening-melting,which can optimize the composition of the slag phase and improve the slag liquidity.When the structure of the ferrous burden is magnesium-containing pellets mixed with high-MgO sinter,the magnesium-containing pellets weaken the interaction of the ferrous burden in the process of softening-melting,increase the content of the high melting point solid-phase particles in the slag,lead to an increase in the viscosity of the slag and difficult separation of the slag and iron,and decrease the permeability of the charge layer.Therefore,to ensure good permeability of the mixed burden,the following measures are suggested:optimizing the MgO distribution of the ferrous burden,reducing the MgO content of the sinter to 1.96 wt.%,increasing the MgO content of the pellets to 1.03-1.30 wt.%,controlling the MgO/Al_(2)O_(3) ratio of the mixed burden within 1.15-1.32,narrowing the position of the cohesive zone,and maintaining an S value(permeability index)of approximately 150 kPa℃.
基金National Key R&D Program of China(2019YFC1904903 and 2020YFC1806504)China Postdoctoral Science Foundation(2020M680757)Fundamental Research Funds for the Central Universities(2022XJHH08).
文摘Novel coal gangue-based persulfate catalyst(CG-FeCl_(2))was successfully synthesized by the means of calcinating under nitrogen atmosphere with the addition of ferrous chloride tetrahydrate(FeCl_(2)·_(4)H_(2)O).The phase transformation of the prepared materials and gas products during the heating process are thoroughly investigated.It is suggested that ferrous chloride participated in the phase transformation and formed Si-O-Fe bonds.And the main gaseous products are H_(2)O,H_(2),and HCl during the heating process.Besides,the ability of CG-FeCl_(2) to activate peroxymonosulfate(PMS)for catalytic degradation of polycyclic aromatic hydrocarbons(PAHs)and phenol was deeply studied.More than 95%of naphthyl,phenanthrene and phenol were removed under optimizied conditions.In addition,1O_(2),·OH,and SO_(4)·−were involved in the CG-FeCl_(2)/PMS system from the free radical scavenging experiment,where 1O_(2) played a major role during the oxidation process.Furthermore,CG-FeCl_(2)/PMS system exhibited superior stability in a relatively wide pH range and the presence of common anion from related degradation experiments.Overall,the novel CG-FeCl_(2) is an efficient and environmentally friendly catalyst,displaying potential application prospect in the field of PAHs and phenol-contaminated wastewater treatment.
基金Project(2013A090100013)supported by the Special Project on the Integration of Industry,Education and Research of Guangdong Province,ChinaProject(201407300993)supported by the High Technology Research and Development Program of Xinjiang Uygur Autonomous Region,China
文摘Magnetite concentrate was recovered from ferrous sulphate by co-precipitation and magnetic separation. In co-precipitation process, the effects of reaction conditions on iron recovery were studied, and the optimal reaction parameters are proposed as follows： n（CaO）/n（Fe2＋） 1.4：1, reaction temperature 80 ℃, ferrous ion concentration 0.4 mol/L, and the final mole ratio of Fe3＋ to FJ＋ in the reaction solution 1.9-2.1. In magnetic separation process, the effects of milling time and magnetic induction intensity on iron recovery were investigated. Wet milling played an important part in breaking the encapsulated magnetic phases. The results showed that the mixed product was wet-milled for 20 min before magnetic separation, the grade and recovery rate of iron in magnetite concentrate were increased from 51.41% and 84.15% to 62.05% and 85.35%, respectively.
基金Project (2007AA06Z129) supported by the National High-tech Research and Development Program of China
文摘In order to develop a low-cost approach for separating macro amounts of Mo and W, the effects of parameters on the separation using FeSO4 as precipitation reagent were studied. The results show that the optimum reaction temperature is 10 °C, and the separation factor does not further improve after a reaction time of 7 h. Moreover, slow dropping speed of the precipitation reagent is beneficial for improving the separation efficiency. When the H＋/W molar ratio is below 1/1, the addition of acid to a neutral solution is favorable to the separation. For the solution with an ammonium concentration below 3 mol/L, the separation factor is high due to the high W-precipitation rate. Furthermore, the method is also effective when it is applied to industrial solution containing some other impurities. All these indicate the ferrous salts have great potential for removing W from Mo on a commercial scale.
文摘Polyethylene (PE) films with additives consisting mainly of oleic acid and ferrous ions were subjected to accelerated degradation at simulated composting temperatures.Based on Fourier transform infrared spectroscopy and measurements of mechanical properties and viscosity average molecular weight,the degradation of the films was characterized and the degradation mechanism was discussed.The films containing additives with ferrous ions represent considerable decreases in molecular weight,and the carbonyl groups and hydroperoxides in the aging films show different trends of increase with the aging time.These results indicate that the ferrous ion plays an important role in the degradation of PE films and accelerates the degradation of PE.
基金Project supported by National Science and Technology Support Program of China(2015BAB16B01)Training Program of Major Academic and Technical Leaders in Jiangxi Province(20142BCB22005)Top Youth Talent Training Program of"Gan Po 555 Talents Project"of Jiangxi Province
文摘The practice ofin-situ leaching of the ion-adsorption type rare earths ore with ammonium sulfate could only leach most of rare earth in ion-exchangeable phase,but not the colloidal sediment phase.Therefore,the reduction leaching of rare earth from the ion-adsorption type rare earths ore with ferrous sulfate was innovatively put forward.The soak leaching process and the column leaching process were investigated in the present study.It was determined that ion-exchangeable phase could be released,and part of colloidal sediment phase rare earth could be reduction leached by the cations with reduction properties.The mechanism of reduction leaching was discussed with the Eh-pH diagram of cerium.Moreover,the stronger reduction of reductive ions,the greater acidity of leaching agent solution,and the higher reductive ion concentration,could result in the higher rare earth efficiency and the bigger ce-rium partition in the leaching liquor.In the ferrous sulfate column leaching process,the rare earth leaching rate and the rare earth effi-ciency were a little higher than with(NH4)2SO4 agent,and the rare earth efficiency and the partitioning of cerium in leaching liquor could be about 102%and 5.31%,respectively.However,the ferrous sulfate leaching process revealed some problems,so compound leaching with magnesium sulfate and a small amount of ferrous sulfate was proposed to an excellent alternative leaching agent for further studies,which may realize efficiency extraction and be environment-friendly.
基金supported by the National Natural Science Foundation of China(No.21177033)
文摘Ferrous and manganese ions, as essential elements, significantly affect the synthesis of Haem-C, which participates in the energy metabolism and proliferation of anammox bacteria. In this study, two identical sequencing batch biofilm reactors were used to investigate the effects of ferrous and manganese ions on nitrogen removal efficiency and the potential of metal ions serving as electron donor/acceptors in the anammox process. Fluorescence in situ hybridization analysis was applied to investigate the microbial growth. Results showed that the nitrogen removal increased at high concentrations of Fe2＋ and Mn2＋ and the maximum removal efficiency was nearly 95% at Fe2＋ 0.08 mmol/L and Mn2＋ 0.05 mmol/L, which is nearly 15% and 8% higher than at the lowest Fe2＋ and Mn2＋ concentrations （0.04 and 0.0125 mmol/L）. The stabilities of the anammox reactor and the anammox bacterial growth were also enhanced with the elevated Fe2＋ and Mn2＋ concentrations. The Fe2＋ and Mn2＋were consumed by anammox bacteria along with the removal of ammonia and nitrite. Stoichiometry analysis showed Fe2＋ could serve as an electron donor for NO3-N in the anammox process. Nitrate could be reduced with Fe2＋ serving as the electron donor in the anammox system, which causes the value of NO^-N/NH4-N to decrease with the increasing of N-removal efficiency.
基金Item Sponsored by National Natural Science Foundation of China (50204005 ,50374029)
文摘A great amount of ferrous tailings and slag cause severe damage to the ecological environment, which must be reclaimed and utilized. The composition, type, and characteristics of ferrous tailings and slag in China were introduced. The research status and the application outlook of glass ceramics made from ferrous tailings and slag were discussed. Glass ceramics made from ferrous tailings and slag can be applied to various fields, and it will be environmentally conscious materials in the 21st century.
基金supported by the National Natural Science Foundation of China (No. 50908060,50821002)the Ph.D Program Foundation of Ministry of Education of China for New Faculty (No. 200802131053)
文摘Chromium and/or arsenate removal by Fe（Ⅱ） as a function of pH, Fe（Ⅱ） dosage and initial Cr（Ⅵ）/As（Ⅴ） ratio were examined in batch tests. The presence of arsenate reduced the removal efficiency of chromium by Fe（Ⅱ）, while the presence of chromate significantly increased the removal efficiency of arsenate by Fe（Ⅱ） at pH 6-8, In the absence of arsenate, chromium removal by Fe（Ⅱ） increased to a maximum with increasing pH from 4 to 7 and then decreased with a further increase in pH. The increment in Fe（Ⅱ） dosage resulted in an improvement in chromium removal and the improvement was more remarkable under alkaline conditions than that under acidic conditions. Chromium removal by Fe（Ⅱ） was reduced to a larger extent under neutral and alkaline conditions than that under acidic conditions due to the presence of 10 μtmol/L arsenate. The presence of 20 μmol/L arsenate slightly improved chromium removal by Fe（Ⅱ） at pH 3.9-5,8, but had detrimental effects at pH 6.7-9.8. Arsenate removal was improved significantly at pH 4-9 due to the presence of 10μmol/L chromate at Fe（Ⅱ） dosages of 20-60 μmol/L. Elevating the chromate concentration from 10 to 20μmol/L resulted in a further improvement in arsenate removal at pH 4.0-4.6 when Fe（Ⅱ） was dosed at 30-60 μmol/L.
文摘To study the effects of selenium on root oxidizing ability and yield of rice under ferrous stress, a pot culture experiment was conducted, the activity of glutathione peroxidase (GSH-Px) and the concentration of malonaldelyde (MDA) were determined. The root oxidizing ability and yield characters of rice were examined. Results showed that appropriate amount of Se enhanced the activity of glutathione peroxidase and the oxidizing ability of rice roots significantly, reduced the concentration of MDA, increased 1000-grain weight of rice, F = 26.96**, decreased empty and blighted grain rate, increased the rice yield, F = 11.53**, and enhanced the rice resistance under ferrous stress.
基金Projects(51804146,51964029,51664030,51564030)supported by the National Natural Science Foundation of ChinaProject(2018YFC1900402)supported by the National Key Research and Development Program of ChinaProject supported by the Analysis and Testing Center of Kunming University of Science and Technology,China
文摘The transformation behavior of ferrous sulfate was examined during hematite precipitation for iron removal in hydrometallurgical zinc.Specifically,the effects of the method used for oxygen supply(pre-crystallization or pre-oxidation of ferrous sulfate)and temperature(170–190℃)on the redissolution and oxidation–hydrolysis of ferrous sulfate were studied.The precipitation characteristics and phase characterization of the hematite product were investigated.The results showed that the solubility of ferrous sulfate was considerably lower at elevated temperatures.The dissolution behavior of ferrous sulfate crystals was influenced by both the concentrations of free acid and zinc sulfate and the oxydrolysis of ferrous ions.Rapid oxydrolysis of ferrous ions may serve as the dissolution driving force.Hematite precipitation proceeded via the following sequential steps:crystallization,redissolution,oxidation,and precipitation of ferrous sulfate.The dissolution of ferrous sulfate was slow,which helped to maintain a low supersaturation environment,thereby affording the production of high-grade hematite.
基金supported by the National Natural Science Foundation of China (51962008)。
文摘The exploitation of a highly selective and sensitive probe to detect both cancer marker and metal ion is of great importance.In this work,the "one stone two bird" agent of 1,10-phenanthroline(phen) is designed to disrupt the polymeric lanthanide MOFs(LnMOFs,[Ln(CHO_(2))_(3)]n,Ln=Tb,la;Eu,1 b,CHO_(2)=formic acid) {[Ln(CHO_(2))_(4)·(C_(2) H_(8) N)]n,Ln=Y,2 a;Gd,2 b;Dy,2 c,C_(2)H_(8) N=dimethylamine}) into a soluble mononuclear species [Ln(phen)_(2)(NO_(3))_(3),Ln=Tb,3 a;Eu,3 b] as well as to provide an antenna for efficient photons absorption,resulting in an ultra-high luminescence quantum yield(QY,90%) europium complex.The luminescence QY is among the highest record of monomeric(zero-dimensional) lanthanide complexes.Furthermore,mononuclear Tb3+complex(3 a) functions as a multiplex sensor towards both Fe^(2+)and cancer marker of 5-hydroxyindole-3-acetic acid(5-HIAA).Importantly,the limit of detection(LOD)for sensing 5-HIAA is an ultra-sensitive value of 1 × 10 s mol/L,which is even lower than that necessary for the early diagnosis of carcinoid tumors.More interestingly,sensing results in simulated urine reveals that 3 a has potential application for early diagnosis in the clinic.
基金Item Sponsored by National Basic Research Program of China(2012CB720401)National Natural Science Foundation of China and Baosteel(51134008)
文摘The softening and melting behavior of sinter, pellet and mixed burden was researched through high tem- perature reaction tests under load simulating traditional blast furnace （T-BF） and oxygen blast furnace （OBF） condi- tions. The results indicated that compared with T-BF, the softening zone of sinter and pellet became wide, but the melting zone became narrow in OBF. The permeabilities of both sinter and pellet were improved in OBF. Under the condition of OBF, the temperature of softening zone of mixed burden was increased by 63 K, but the temperature of melting zone was decreased by 76 K. Therefore, the permeability of material layer was significantly improved. This was mainly caused by the change of the melting behavior of pellet. In addition, the quality Of dripping iron in OBF was much better than that of T-BF.
基金supported by the National Natural Science Foundation of China(Grant No.U1402234)the Guangxi Scientific Research and Technology Development Plan(Grants No.GuikeAB16380287 and GuikeAB17129025)+2 种基金the Public Welfare Fund of the Ministry of Environmental Protection of China(Grant No.201509049)the Program of International S & T Cooperation(Grant No.2016YFE0130700)the Fund of the General Research Institute for Nonferrous Metals(Grants No.53321 and 53348)
文摘The effect of hydraulic retention time (HRT) and pH on the biooxidation of ferrous iron during simulated acid mine drainage (AMD) treatment was investigated.The simulated AMD was highly acidic (pH 2.5), rich in iron (about 1700 mg/L) and copper (about 200 mg/L), and contained high concentrations of sulfate (about 4700 mg/L).The biooxidation of ferrous iron was studied in a laboratory-scale upflow packed bed bioreactor (PBR).The HRT was shortened stepwise from 40 h to 20 h, 13 h, and 8 h under the acidic environment at a pH value of 2.2.Then, the influent pH value was changed from 2.2 to 1.2 at a constant suitable HRT.Physiochemical and microbial community structure analyses were performed on water samples and stuffing collected from the bioreactor under different conditions.The results indicate that the efficiency of ferrous iron oxidation gradually decreased with the decrease of HRT, and when the HRT exceeded 13 h, ferrous iron in AMD was almost completely oxidized.In addition, the best efficiency of ferrous iron oxidation was achieved at the influent pH value of 1.8.Microbial community structure analyses show that Leptospirillum is the predominant genus attached in the bioreactor, and low influent pH values are suitable for the growth of Leptospirillum.
基金Project(2010B050200007)supported by the Foundation of Science and Technology Planning Project of Guangdong Province,ChinaProject(2011ZM0054)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(2011K0013)supported by the Research Fund Program of Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology,ChinaProject(2012)supported by the Research Funds of Guangdong Provincial Key Laboratory of Atmospheric environment and Pollution Control,China
文摘In the interest of accelerating aniline degradation, Fe2+ and chelated Fe2+ activated persulfate oxidations were investigated in neutral pH condition. Three kinds of chelating agents were selected including citric acid, oxalic acid and ethylenediamine tetraaceatate(EDTA) to maintain available Fe2+. The results indicate that the concentration of chelating agent and ferrous ion didn't follow a linear relationship with the degradation rate of aniline. A 1/1 ratio of chelating agent/Fe2+ results in a higher degradation rate compared to the results by other ratios. The oxidation enhancement factor using oxalic acid was found to be relatively low. In contrast, citric acid is more suitable chelating agent in the ferrous iron activated persulfate system and aniline exhibits a highest degradation with a persulfate/Fe2+/citric acid/aniline molar ratio of 50/25/25/1 compared to other molar ratios.
基金financially supported by the National Natural Science Foundation of China(Nos.51304151 and 51174062)the High-Tech Research and Development Program of China(No.2012AA061501)
文摘Intensifying effects of ferrous sulfate and pyrite on bioleaching of low-grade molybdenite concentrate were studied in this paper. The experimental results show that the oxidation dissolution of molybdenite can be accelerated with the addition of either ferrous sulfate or pyrite in bi- oleaching medium. Pyrite has better enhancing effect than ferrous sulfate, and the highest molybdenum leaching rate in pyrite-added solutions is 20.85 %, increasing by 12.64 % compared with that in 9 K leaching system. Molybdenum leaching rate does not increase linearly with the increase of the addition of either ferrous sulfate or pyrite in each type solution. Great amounts of [NH4Fe3（SO4）2（OH）6] and [KFe3（SO4）2（OH）6] with different morphologies will be deposited on molybdenite ores when the additions of Fe from ferrous sulfate or pyrite exceed that from 9 K leaching system by 0.5 times, and these deposits hinder the oxidation dissolution of molybdenite to some extent.
