A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w...A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.展开更多
To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the...To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the alloy across different planes were investigated.The anisotropy of SLM-fabricated Ti-6Al-4V alloys was analyzed,and the electron backscatter diffraction technique was used to investigate the influence of different grain types and orientations on the stress-strain distribution at various scales.Results reveal that in room-temperature compression tests at a strain rate of 10^(-3) s^(-1),both the compressive yield strength and microhardness vary along the deposition direction,indicating a certain degree of mechanical property anisotropy.The alloy exhibits a columnar microstructure;along the deposition direction,the grains appear equiaxed,and they have internal hexagonal close-packed(hcp)α/α'martensitic structure.α'phase has a preferential orientation approximately along the<0001>direction.Anisotropy arises from the high aspect ratio of columnar grains,along with the weak texture of the microstructure and low symmetry of the hcp crystal structure.展开更多
Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade...Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.展开更多
The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of...The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.展开更多
Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a ...Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a laser energy output of 2.2 mJ at 10μm was obtained.By tuning the angle and temperature,a tunable laser output covering the wavelength range from 6μm to 17μm was obtained with a tuning precision better than 3 nm.The corresponding optical-to-optical conversion efficiency was 2.8%,and the slope efficiency was 4.4%.The damage effect of the output laser on detectors was also investigated,and point damage to the detector occurred at an output energy of 16.4μJ.The laser system has the advantages of miniaturization,a wide tuning range,high energy and high tuning resolution.Its broadband laser characteristics make it highly valuable for applications in atmospheric detection,infrared spectroscopy and electro-optical countermeasures.展开更多
Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back ...Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back scattering diffraction(EBSD)observations showed that the grains in melted zone(MZ)transformed into equiaxial grains with an average size of 1.31μm,and the grains in heat affected zone(HAZ)were refined.Moreover,the texture intensity dropped significantly from 13.86 to 6.35 in MZ and 10.79 in HAZ.The temperature gradient(G)to solidification rate(R)ratio decreased when the laser scanning speed slowed down to a certain extent in the LR process,which effectively improved the highly preferred orientation and filled the hole defects in the surface of LPBF-Ti6Al4V.Furthermore,the hardness,wear resistance and corrosion resistance of the surface of the LPBF samples were improved by LR treatment.展开更多
The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstru...The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.展开更多
The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Sur...The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."展开更多
We investigate theoretically and experimentally the chaotic dynamics of visible-wavelength all-fiber ring laser.The100-m 630 HP fibers are used to ensure high non-linearity.A 4-m Pr^(3+)/Yb^(3+)-co-doped ZBLAN fiber p...We investigate theoretically and experimentally the chaotic dynamics of visible-wavelength all-fiber ring laser.The100-m 630 HP fibers are used to ensure high non-linearity.A 4-m Pr^(3+)/Yb^(3+)-co-doped ZBLAN fiber provides the gain.The chaotic laser was pumped by the laser diodes with the maximum power of 150 mW at the wavelength of 850 nm.The peak fluorescence spectrum of Pr^(3+)/Yb^(3+)-co-doped ZBLAN fiber at the wavelength of 635 nm shows that the visiblewavelength fiber laser can be achieved by synergistic energy transfer between Pr~(3+)and Yb^(3+)ions.The chaotic fiber laser is generated by adjusting the pump power,polarization controller and the auto-correlation,permutation entropy,skewness,and kurtosis were used to analyze the characteristics of chaotic laser.The noise-like time series and delta-like auto-correlation curve indicate the chaotic output.The complexity and randomness of time series are analyzed by the permutation entropy,skewness,and kurtosis.The result shows that chaotic dynamics is stable when the pump power exceeds a certain value.The visible chaotic all-fiber laser has high stability and can be applied for real-time monitoring and sensing.We believe that this approach may also be feasible for other materials for emission in the visible range.展开更多
The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solutio...The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.展开更多
Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable pat...Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.展开更多
The 193 nm deep-ultraviolet(DUV)laser plays a critical role in advanced semiconductor chip manufacturing[1,2],micro-nano material characterization[3,4]and biomedical analysis[5,6],due to its high spatial resolution an...The 193 nm deep-ultraviolet(DUV)laser plays a critical role in advanced semiconductor chip manufacturing[1,2],micro-nano material characterization[3,4]and biomedical analysis[5,6],due to its high spatial resolution and short wavelength.Efficient and compact 193 nm DUV laser source thus becomes a hot research area.Currently,193 nm Ar F excimer gas laser is widely employed in DUV lithography systems and serves as the enabling technology for 7 and 5 nm semiconductor fabrication.展开更多
Einstein–Podolsky–Rosen(EPR)steering is an important resource for one-sided device-independent quantum information processing.This steering property can be destroyed by the interaction between a quantum system and i...Einstein–Podolsky–Rosen(EPR)steering is an important resource for one-sided device-independent quantum information processing.This steering property can be destroyed by the interaction between a quantum system and its environment in practical applications.In this paper,we employ the characteristic function representation of probability distributions to investigate the quantum steering of two-mode continuous-variable states in a laser channel,where both the gain factor and the loss effect are taken into account.Firstly,we analyse the steering time of the two-mode squeezed vacuum state under one-mode and two-mode laser channels,respectively.We find that the gain process introduces additional noise into the two-mode squeezed vacuum state,thereby reducing the steerable time.Secondly,by quantifying EPR steering,we show that two-side loss exhibits smaller steerability than one-side loss,although they share the same two-way steerable time.In addition,we find that the more-gained party can steer the other party’s state,whereas the other party cannot steer the gained party beyond a certain threshold value.In this sense,the gain effect in one party appears to be equivalent to the loss effect in the other party.Our results pave the way for the distillation of EPR steering and quantum information processing in practical quantum channels.展开更多
The precise excitation of molecular vibrational states is critical for ad-vancing chemical dynamics,preci-sion spectroscopy,and trace gas sensing.This objective,however,is often hindered by the weak oscilla-tor streng...The precise excitation of molecular vibrational states is critical for ad-vancing chemical dynamics,preci-sion spectroscopy,and trace gas sensing.This objective,however,is often hindered by the weak oscilla-tor strengths of ro-vibrational tran-sitions,which render conventional continuous-wave(cw)lasers ineffec-tive due to their limited power.This fundamental challenge is overcome by cavity-enhanced excitation(CEE),a technique that locks a cw laser to a high-finesse optical cavity.This configuration amplifies the intra-cavity light intensity by several orders of magnitude while preserving a narrow spectral linewidth.The resulting synergy enables highly efficient,state-selective population transfer and high-resolution spectroscopy previously considered impractical.This review elucidates the core technique of laser-cavity locking and highlights its applications,notably in the quantitative detection of trace isotopes and the investigation of highly excited vibrational states with kilo-hertz-level accuracy.展开更多
In this study,the effects of laser fields that can be achieved in the near future on cluster penetration probability and half-life are quantitatively investigated.The calculation results show that extreme laser fields...In this study,the effects of laser fields that can be achieved in the near future on cluster penetration probability and half-life are quantitatively investigated.The calculation results show that extreme laser fields can slightly change the cluster-decay half-life by affecting the penetration probability within a narrow range.Subsequently,we discuss the correlation between the change rate of the penetration probability and the tunneling path.The results indicate that for different parent nuclei emitting the same cluster,nuclei with longer tunneling paths are more easily affected by the laser fields.The shell effect on this correlation is also observed.In addition,the impact of laser fields on the penetration probability in any direction is investigated.展开更多
The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(...The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.展开更多
Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric ...Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.展开更多
Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning o...Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning of inorganic functional materials have been developed,they operate at small scale and require long processing times,restricting their effective translation from laboratory to market.Here we report a fast,liquid-free,cost-effective,and environmentally friendly aerosol-based printing method for fabricating linear or planar structures at microscale dimensions.In situ and on-demand generation of dry aerosol via pulsed laser ablation,coupled with real-time aerodynamical focusing using a co-flowing sheath gas,allows the deposition of a wide variety of materials on various substrates at room temperature and atmospheric pressure.Using silver as a test material,we systematically characterized the laser-generated aerosol deposits in terms of microstructural morphology,sintering activity,mass yield,density,and electrical performance,to show the relationship between process variability and underlying mechanisms.The capacity of high-throughput printing of silver deposits,with thickness up to 160μm,in a single pass was demonstrated.This rapid,efficient,and inkless printing process opens new and exciting opportunities for future applications that require easy-to-integrate components in printed electronic devices.展开更多
We present a solid 226 nm deep ultraviolet laser system pumped by a Nd:YAG laser.A diamond Raman laser with a 1485 nm wavelength was generated up to 2.53 mJ pumped by a 9.7 mJ 1064 nm laser,which is the highest pulse ...We present a solid 226 nm deep ultraviolet laser system pumped by a Nd:YAG laser.A diamond Raman laser with a 1485 nm wavelength was generated up to 2.53 mJ pumped by a 9.7 mJ 1064 nm laser,which is the highest pulse energy of a second Stokes diamond Raman laser pumped by a 1064 nm laser as we know.Then,the Raman laser is mixed with the frequency-quadrupled 1064 nm laser to produce the 226 nm laser.The maximum output pulse energy at 226 nm reaches 0.49 mJ.The overall conversion efficiency from1064 to 226 nm is up to 1.14%,which is significantly higher than conventional optical parametric oscillator technology for the generation of 226 nm laser.The 226 nm laser system has been used in a laser-induced fluorescence(LIF)experiment of oxygen two-photon to demonstrate its potential for LIF measurements.展开更多
The process of nuclear fusion in the presence of a laser field was theoretically analyzed.The analysis is applicable to most fusion reactions and different types of currently available intense lasers,from X-ray free-e...The process of nuclear fusion in the presence of a laser field was theoretically analyzed.The analysis is applicable to most fusion reactions and different types of currently available intense lasers,from X-ray free-electron lasers to solid-state near-infrared lasers.Laser fields were shown to enhance the fusion yields,and the mechanism of this enhancement was explained.Low-frequency lasers are more efficient in enhancing fusion than high-frequency lasers.The calculation results show enhancements of fusion yields by orders of magnitude with currently available intense low-frequency laser fields.The temperature requirement for controlled nuclear fusion may be reduced with the aid of intense laser fields.展开更多
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+8 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)2024 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College(Gfy24-07)Shaanxi Vocational and Technical Education Association 2024 Vocational Education Teaching Reform Research Topic(2024SZX354)National Natural Science Foundation of China(U24A20115)2024 Shaanxi Provincial Education Department Service Local Special Scientific Research Program Project-Industrialization Cultivation Project(24JC005,24JC063)Shaanxi Province“14th Five-Year Plan”Education Science Plan,2024 Project(SGH24Y3181)National Key Research and Development Program of China(2023YFB4606400)Longmen Laboratory Frontier Exploration Topics Project(LMQYTSKT003)。
文摘A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.
基金National Natural Science Foundation of China(51504138,51674118,52271177)Hunan Provincial Natural Science Foundation of China(2023JJ50181)Supported by State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(P2024-022)。
文摘To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the alloy across different planes were investigated.The anisotropy of SLM-fabricated Ti-6Al-4V alloys was analyzed,and the electron backscatter diffraction technique was used to investigate the influence of different grain types and orientations on the stress-strain distribution at various scales.Results reveal that in room-temperature compression tests at a strain rate of 10^(-3) s^(-1),both the compressive yield strength and microhardness vary along the deposition direction,indicating a certain degree of mechanical property anisotropy.The alloy exhibits a columnar microstructure;along the deposition direction,the grains appear equiaxed,and they have internal hexagonal close-packed(hcp)α/α'martensitic structure.α'phase has a preferential orientation approximately along the<0001>direction.Anisotropy arises from the high aspect ratio of columnar grains,along with the weak texture of the microstructure and low symmetry of the hcp crystal structure.
文摘Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.11804348,11775056,11975154,12225505,and 12405281)the Science Challenge(Project No.TZ2018005)+2 种基金supported by the Shanghai Pujiang Program(Grant No.23PJ1414600)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0890203)supported by the Accelerator Technology Helmholtz Infrastructure consortium ATHENA.
文摘The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.
基金supported by Independent Innovation Science Foundation of National University of Defense Technology(Grant No.23-ZZCX-JDZ-44)。
文摘Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a laser energy output of 2.2 mJ at 10μm was obtained.By tuning the angle and temperature,a tunable laser output covering the wavelength range from 6μm to 17μm was obtained with a tuning precision better than 3 nm.The corresponding optical-to-optical conversion efficiency was 2.8%,and the slope efficiency was 4.4%.The damage effect of the output laser on detectors was also investigated,and point damage to the detector occurred at an output energy of 16.4μJ.The laser system has the advantages of miniaturization,a wide tuning range,high energy and high tuning resolution.Its broadband laser characteristics make it highly valuable for applications in atmospheric detection,infrared spectroscopy and electro-optical countermeasures.
基金supported by the National Natural Science Foundation of China(No.51871243)the National Key Laboratory of Strength and Structural Integrity,China(No.ASSIKFJJ202304001)+3 种基金the State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Blasting Engineering,China(No.PBSKL2022C01)the Guangdong-Hong Kong-Macao Joint Laboratory for Neutron Scattering Science and Technology,China(No.HT-CSNS-DG-CD-0092/2021)the Shock and Vibration of Engineering Materials and Structures Key Laboratory of Sichuan Province,China(No.22kfgk06)the Hubei Longzhong Laboratory,China(No.2022KF-08)。
文摘Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back scattering diffraction(EBSD)observations showed that the grains in melted zone(MZ)transformed into equiaxial grains with an average size of 1.31μm,and the grains in heat affected zone(HAZ)were refined.Moreover,the texture intensity dropped significantly from 13.86 to 6.35 in MZ and 10.79 in HAZ.The temperature gradient(G)to solidification rate(R)ratio decreased when the laser scanning speed slowed down to a certain extent in the LR process,which effectively improved the highly preferred orientation and filled the hole defects in the surface of LPBF-Ti6Al4V.Furthermore,the hardness,wear resistance and corrosion resistance of the surface of the LPBF samples were improved by LR treatment.
基金National Key Research and Development Program of China(2024YFB4610803)。
文摘The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.
文摘The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61975141,61575137,and61675144)。
文摘We investigate theoretically and experimentally the chaotic dynamics of visible-wavelength all-fiber ring laser.The100-m 630 HP fibers are used to ensure high non-linearity.A 4-m Pr^(3+)/Yb^(3+)-co-doped ZBLAN fiber provides the gain.The chaotic laser was pumped by the laser diodes with the maximum power of 150 mW at the wavelength of 850 nm.The peak fluorescence spectrum of Pr^(3+)/Yb^(3+)-co-doped ZBLAN fiber at the wavelength of 635 nm shows that the visiblewavelength fiber laser can be achieved by synergistic energy transfer between Pr~(3+)and Yb^(3+)ions.The chaotic fiber laser is generated by adjusting the pump power,polarization controller and the auto-correlation,permutation entropy,skewness,and kurtosis were used to analyze the characteristics of chaotic laser.The noise-like time series and delta-like auto-correlation curve indicate the chaotic output.The complexity and randomness of time series are analyzed by the permutation entropy,skewness,and kurtosis.The result shows that chaotic dynamics is stable when the pump power exceeds a certain value.The visible chaotic all-fiber laser has high stability and can be applied for real-time monitoring and sensing.We believe that this approach may also be feasible for other materials for emission in the visible range.
基金Tianjin Municipal Natural Science Foundation(23JCYBJC00040)National Natural Science Foundation of China(52175369)。
文摘The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.
基金supported by the National Key Research and Development Program of ChinaNational Natural Science Foundation of China(NSFC)Jilin Province Science and Technology Development Plan Project under Grants 2020YFA0715000,62075081,and 20220402011GH。
文摘Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.
基金supported by the National Natural Science Foundation of China(Grant Nos.62450006,62304217,62274157,62127807,62234011,62034008,62074142,62074140)Tianshan Innovation Team Program(Grant No.2022TSYCTD0005)+1 种基金Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0880000)Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant Nos.2023124,Y2023032)。
文摘The 193 nm deep-ultraviolet(DUV)laser plays a critical role in advanced semiconductor chip manufacturing[1,2],micro-nano material characterization[3,4]and biomedical analysis[5,6],due to its high spatial resolution and short wavelength.Efficient and compact 193 nm DUV laser source thus becomes a hot research area.Currently,193 nm Ar F excimer gas laser is widely employed in DUV lithography systems and serves as the enabling technology for 7 and 5 nm semiconductor fabrication.
基金supported by the National Natural Sci-ence Foundation of China(Grant Nos.12404410,12564049,11964013,61975077)the National Key Research and De-velopment Program of China(Grant No.2024ZD0300900)the Jiangxi Provincial Natural Science Foundation(Grant No.20242BAB26009).
文摘Einstein–Podolsky–Rosen(EPR)steering is an important resource for one-sided device-independent quantum information processing.This steering property can be destroyed by the interaction between a quantum system and its environment in practical applications.In this paper,we employ the characteristic function representation of probability distributions to investigate the quantum steering of two-mode continuous-variable states in a laser channel,where both the gain factor and the loss effect are taken into account.Firstly,we analyse the steering time of the two-mode squeezed vacuum state under one-mode and two-mode laser channels,respectively.We find that the gain process introduces additional noise into the two-mode squeezed vacuum state,thereby reducing the steerable time.Secondly,by quantifying EPR steering,we show that two-side loss exhibits smaller steerability than one-side loss,although they share the same two-way steerable time.In addition,we find that the more-gained party can steer the other party’s state,whereas the other party cannot steer the gained party beyond a certain threshold value.In this sense,the gain effect in one party appears to be equivalent to the loss effect in the other party.Our results pave the way for the distillation of EPR steering and quantum information processing in practical quantum channels.
基金supported by the Chinese Acade-my of Sciences(Grant Nos.YSBR-055,XDB0970100)the National Natural Science Foundation of China(Nos.22241302,12393825).
文摘The precise excitation of molecular vibrational states is critical for ad-vancing chemical dynamics,preci-sion spectroscopy,and trace gas sensing.This objective,however,is often hindered by the weak oscilla-tor strengths of ro-vibrational tran-sitions,which render conventional continuous-wave(cw)lasers ineffec-tive due to their limited power.This fundamental challenge is overcome by cavity-enhanced excitation(CEE),a technique that locks a cw laser to a high-finesse optical cavity.This configuration amplifies the intra-cavity light intensity by several orders of magnitude while preserving a narrow spectral linewidth.The resulting synergy enables highly efficient,state-selective population transfer and high-resolution spectroscopy previously considered impractical.This review elucidates the core technique of laser-cavity locking and highlights its applications,notably in the quantitative detection of trace isotopes and the investigation of highly excited vibrational states with kilo-hertz-level accuracy.
基金supported in part by the National Natural Science Foundation of China(Nos.12175100 and 11975132)the Construct Program of the Key Discipline in Hunan Province+5 种基金the Research Foundation of Education Bureau of Hunan Province,China(Nos.21B0402,18A237,22A0305)the Natural Science Foundation of Hunan Province,China(No.2018JJ2321)the Innovation Group of Nuclear and Particle Physics in USCthe Shandong Province Natural Science Foundation,China(No.ZR2022JQ04)the Opening Project of Cooperative Innovation Center for Nuclear Fuel Cycle Technology and Equipment,University of South China(No.2019KFZ10)the Hunan Provincial Innovation Foundation for Postgraduate(No.CX20251453)。
文摘In this study,the effects of laser fields that can be achieved in the near future on cluster penetration probability and half-life are quantitatively investigated.The calculation results show that extreme laser fields can slightly change the cluster-decay half-life by affecting the penetration probability within a narrow range.Subsequently,we discuss the correlation between the change rate of the penetration probability and the tunneling path.The results indicate that for different parent nuclei emitting the same cluster,nuclei with longer tunneling paths are more easily affected by the laser fields.The shell effect on this correlation is also observed.In addition,the impact of laser fields on the penetration probability in any direction is investigated.
基金supported by the Jiangxi Provincial Natural Science Foundation of China(Grant number 20224BAB204049)the Fund Project of Jiangxi Provincial Department of Education(Grant number GJJ2200602)the National Natural Science Foundation of China(Grant number 52205194)。
文摘The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.
基金supported by Research Fund of SWUST for PhD(Grant No.22zx7175)Sichuan Science and Technology Program(Grant No.2024NSFSC1097)。
文摘Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.
基金financial support from the China Scholarship Council(No.202108220036)Advanced Microscopy Laboratory in Trinity College Dublin。
文摘Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning of inorganic functional materials have been developed,they operate at small scale and require long processing times,restricting their effective translation from laboratory to market.Here we report a fast,liquid-free,cost-effective,and environmentally friendly aerosol-based printing method for fabricating linear or planar structures at microscale dimensions.In situ and on-demand generation of dry aerosol via pulsed laser ablation,coupled with real-time aerodynamical focusing using a co-flowing sheath gas,allows the deposition of a wide variety of materials on various substrates at room temperature and atmospheric pressure.Using silver as a test material,we systematically characterized the laser-generated aerosol deposits in terms of microstructural morphology,sintering activity,mass yield,density,and electrical performance,to show the relationship between process variability and underlying mechanisms.The capacity of high-throughput printing of silver deposits,with thickness up to 160μm,in a single pass was demonstrated.This rapid,efficient,and inkless printing process opens new and exciting opportunities for future applications that require easy-to-integrate components in printed electronic devices.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2032136 and U2241288)the Shaanxi Fundamental Science Research Project for Mathematics and Physics(Grant No.23JSY012)。
文摘We present a solid 226 nm deep ultraviolet laser system pumped by a Nd:YAG laser.A diamond Raman laser with a 1485 nm wavelength was generated up to 2.53 mJ pumped by a 9.7 mJ 1064 nm laser,which is the highest pulse energy of a second Stokes diamond Raman laser pumped by a 1064 nm laser as we know.Then,the Raman laser is mixed with the frequency-quadrupled 1064 nm laser to produce the 226 nm laser.The maximum output pulse energy at 226 nm reaches 0.49 mJ.The overall conversion efficiency from1064 to 226 nm is up to 1.14%,which is significantly higher than conventional optical parametric oscillator technology for the generation of 226 nm laser.The 226 nm laser system has been used in a laser-induced fluorescence(LIF)experiment of oxygen two-photon to demonstrate its potential for LIF measurements.
基金supported by the National Natural Science Foundation of China(Nos.12405288,12374241,12474484,U2330401,12088101)the Natural Science Foundation of Top Talent of SZTU(No.GDRC202526)。
文摘The process of nuclear fusion in the presence of a laser field was theoretically analyzed.The analysis is applicable to most fusion reactions and different types of currently available intense lasers,from X-ray free-electron lasers to solid-state near-infrared lasers.Laser fields were shown to enhance the fusion yields,and the mechanism of this enhancement was explained.Low-frequency lasers are more efficient in enhancing fusion than high-frequency lasers.The calculation results show enhancements of fusion yields by orders of magnitude with currently available intense low-frequency laser fields.The temperature requirement for controlled nuclear fusion may be reduced with the aid of intense laser fields.
