The availability of local feed resources in various seasons can contribute as essential sources of carbohydrate and protein which significantly impact rumen fermentation and the subsequent productivity of the ruminant...The availability of local feed resources in various seasons can contribute as essential sources of carbohydrate and protein which significantly impact rumen fermentation and the subsequent productivity of the ruminant.Recent developments,based on enriching protein in cassava chips,have yielded yeast fermented cassava chip protein（YEFECAP） providing up to 47.5% crude protein（CP）,which can be used to replace soybean meal.The use of fodder trees has been developed through the process of pelleting;Leucaena leucocephala leaf pellets（LLP）,mulberry leaf pellets（MUP） and mangosteen peel and/or garlic pellets,can be used as good sources of protein to supplement ruminant feeding.Apart from producing volatile fatty acids and microbial proteins,greenhouse gases such as methane are also produced in the rumen.Several methods have been used to reduce rumen methane.However,among many approaches,nutritional manipulation using feed formulation and feeding management,especially the use of plant extracts or plants containing secondary compounds（condensed tannins and saponins） and plant oils,has been reported.This approach could help todecrease rumen protozoa and methanogens and thus mitigate the production of methane.At present,more research concerning this burning issue-the role of livestock in global warming-warrants undertaking further research with regard to economic viability and practical feasibility.展开更多
To improve the accuracy of fault location system, several short-circuit tests need to be conducted before being brought into service in autotransformer （AT） feeding systems for high-speed railways in China. However,...To improve the accuracy of fault location system, several short-circuit tests need to be conducted before being brought into service in autotransformer （AT） feeding systems for high-speed railways in China. However, no systematic algorithm yet exists to evaluate the consistency of the current distribution of short-circuit tests. A methodology is proposed in this paper to address this problem. Based on Kirchhoff’s current law and the generalized method of symmetrical components, the current deviations of the AT feeding systems are analysed and then normalized with the short-circuit current as they vary greatly with systems and short-circuit sites. It is also found that the short-circuit current varies with the calculation methods, and its unbiased standard deviation also reflects the consistency of the short-circuit test. The mean and maximum of the current deviations, as well as the unbiased standard deviation of the short-circuit current, show the consistency of the short-circuit test from different aspects,although the last two items are highly relevant. Therefore, a unified evaluation index is defined as the sum of the three items, and then applied in two case studies to test its performance. The results show that, the proposed index canclearly distinguish the consistency of the short-circuit tests and may be used to sort the short-circuit tests for fault location systems. Besides, some short-circuit tests may have very poor consistency indices, and thus are not applicable to the tuning of fault location systems. In the authors’ opinion, the determination of the threshold of the proposed index needs further investigation.展开更多
A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of ...A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of CFS is subjected to unknown load characteristics of rock or soil; in addition,the geological condition is time-varying.Due to the complex load characteristics of rock or soil,the feeding velocity of TC is related to geological conditions.What is worse,its dynamic model is subjected to uncertainties and its function is unknown.To deal with the particular characteristics of CFS,a novel adaptive fuzzy integral sliding mode control(AFISMC) was designed for feeding pressure control of CFS,which combines the robust characteristics of an integral sliding mode controller and the adaptive adjusting characteristics of an adaptive fuzzy controller.The AFISMC feeding pressure controller is synthesized using the backstepping technique.The stability of the overall closed-loop system consisting of the adaptive fuzzy inference system,integral sliding mode controller and the cutter feeding system is proved using Lyapunov theory.Experiments are conducted on a TC test bench with the AFISMC under different operating conditions.The experimental results demonstrate that the proposed AFISMC feeding pressure controller for CFS gives a superior and robust pressure tracking performance with maximum pressure tracking error within ?0.3 MPa.展开更多
In order to utilize the spontaneous accumulation of heat (SAH) reasonably and obtain the high quality sinter with low energy consumption, a lower fuel consumption modeling based on raw materials of a certain steel wor...In order to utilize the spontaneous accumulation of heat (SAH) reasonably and obtain the high quality sinter with low energy consumption, a lower fuel consumption modeling based on raw materials of a certain steel works was built. An air-flow segregation feeding (ASF) experimental equipment was designed to simulate strand feeding process and calculate the lower fuel consumption quantity. Compared with baseline test, the ASF experimental equipment was adopted. The results of sinter pot tests show that the solid fuel consumption is lower than that in baseline test, which is decreased by 5.8%. Meanwhile, other sinter indexes, such as pan yeild, tumbler strength and strand productivity are improved. The mineralogical examination indicates that the mineral compositions and micostructures are improved in sinter.展开更多
With the background of the control of additional mechanical force droplet transfer in MIG/MAG welding, regarding the AC servo motor as core, a novel oscillating wire feeding system has been developed with excellent pe...With the background of the control of additional mechanical force droplet transfer in MIG/MAG welding, regarding the AC servo motor as core, a novel oscillating wire feeding system has been developed with excellent performances of control and dynamic acceleration which is tested. System constitution and operation principle are introduced in this paper. Influences of parameters on dynamic acceleration performance are analyzed and discussed emphatically, such as oscillating frequency, oscillating amplitude and draw-back speed. Experimental result indicates that according to the technique of welding control, the novel wire feeding system responds rapidly to various kinds of control orders of wire feeding and draw-back, and realizes flexible control of welding wire axial movement, including dynamic shifting,oscillating and so on.展开更多
A 1：1 water model of a twin-roll strip caster was set up based on the Froude number（Fr） and Reynolds number （Re） similarity criteria. Fluctuation and the mixing effect in the molten pool of twin-roll strip castin...A 1：1 water model of a twin-roll strip caster was set up based on the Froude number（Fr） and Reynolds number （Re） similarity criteria. Fluctuation and the mixing effect in the molten pool of twin-roll strip casting process were analyzed through hydraulic simulation. The height of the fluctuation of the liquid pool surface and the residence time were measured by DJ800 multifunctional monitor under different process conditions. The results show that the casting velocity, the insertion depth and the pool level have a great effect on the fluctuation.展开更多
Fifty Holstein cows (2.6 ± 1.0 lactations) in early lactation (52.6 ± 16.4 days in milk) calved in autumn and producing 34.3 (±4.4) kg milk per cow·day-1 were randomly assigned for 27 weeks to one ...Fifty Holstein cows (2.6 ± 1.0 lactations) in early lactation (52.6 ± 16.4 days in milk) calved in autumn and producing 34.3 (±4.4) kg milk per cow·day-1 were randomly assigned for 27 weeks to one of two treatments (feeding systems) in 10 groups (pens) of 5 animals each (5 groups/treatment). The confined treatment was a total mixed ration (TMR_100) whereas the supplemented grazing system was defined by a partially mixed ration (PMR_75) with 75% TMR and 25% oat pasture (Avena sativa L.) during the autum-winter (Period I) and alfalfa pasture (Medicago sativa L.) plus concentrate (7.0 kg per cow·day-1) (P + C) during the next spring (Period II). Milk production was daily and individually recorded throughout the trial while the chemical composition of milk was measured on individual samples every 2 weeks. Live weight (LW) and body condition score (BCS) using a scale of 1 to 5 were recorded every 3 weeks after the morning milking. Simultaneously, blood samples were taken for determinations of glucose, urea, non-esterified fatty acids (NEFA), insulin, somatotrophin (GH) and somatomedin C (IGF-I). Total DM intake was measured using the difference method four times per repetition in the months of July, August, September and October. The experimental herd was inseminated at fixed time at the start of the service (May-July) and on the return with estrus detection. The diagnosis of pregnancy was made by transrectal ultrasonography at 30 and 60 days after the start of the service. The productive data were analyzed according to a model with repeated observations in time adjusted by covariate with 2 periods and using the animal as the experimental unit. Data of DM intake were analyzed using ANOVA for 2 treatments with 5 repetitions. Cows from the TMR_100 group produced more milk (kg·cow-1·day-1) during Period I (33.7 vs. 32.3) and Period II (28.8 vs. 27.8) (P ·cow-1·day-1) in Periods I (1.33 vs. 1.24) and II (1.10 vs. 0.92) and for milk protein (1.19 vs. 1.13 and 0.99 vs. 0.93). The lower energy intake of grazing cows (45.0 vs. 43.1 and 40.9 vs. 38.9 Mcal per?cow·day-1 for TMR_100 vs. PMR_75 and TMR_100 vs. P + C) coupled to the extra energy cost associated with grazing activity would explain the difference in milk production. Milk protein content (%) resulted higher (P kg·cow-1·day-1) in the cows of the TMR_100 group in both periods (0.69 vs. 0.34 and 0.49 vs. -0.22) was consistent with the increase in the plasmatic levels of glucose and IGF-I and the reduction in the circulating levels of GH, but not with the lack of increases in plasma insulin concentration or decreases in circulating levels of NEFA, parameters that were not affected by treatments. Despite the positive effects of TMR_100 on parameters linked to energy balance, no significant differences were detected in any of the reproductive parameters evaluated and the final rate of pregnancy was 80.0 and 91.3% for the confined and grazing system with supplementation respectively. Free milk liters over feeding costs were higher in the grazing system with supplementation compared to the confined system (18.5 vs. 15.5 l, respectively). The results indicate that the grazing system with supplementation can be economically competitive compared to the confined system of milk production.展开更多
In this paper, we conduct research on the high-end feeding system and the application scenarios on the lake sheep barn feeding scale breeding technology research. Sheep farm reproduction for the main places, so make s...In this paper, we conduct research on the high-end feeding system and the application scenarios on the lake sheep barn feeding scale breeding technology research. Sheep farm reproduction for the main places, so make sure sheep pen set reasonable. At the same time, we should reduce/avoid adverse effects caused by the surroundings of the flock, and conducive to the sheep’s normal growth and reproduction.Goats engineering technology mainly includes process of design and construction, building facilities, environmental control, waste treatment technology, sheep product processing technology, such as sheep breeding engineering technology is connected to the biological technology. This paper integrates the related theories to propose the countermeasures that will be meaningful.展开更多
The medium -large caliber naval gun is still playing an important role in modern war. The development of highly automatic Shell Raising and Feeding System (SRFS) in the world has been briefly outlined. Several typical...The medium -large caliber naval gun is still playing an important role in modern war. The development of highly automatic Shell Raising and Feeding System (SRFS) in the world has been briefly outlined. Several typical SRFS of medium-large caliber naval guns have been analyzed. A re-design of the system is introduced, in which systematic design method has been used to demonstrate its feasibility. The design goal of the system is to realize rapid shell feeding, with application to many types of shells, quick change of shell types , accurate and reliable feeding operation, simple mechanical structure and easy realization of shell withdrawing.展开更多
The present study investigated the effects of varying protein source combinations and feeding strategies on the growth,health and organoleptic quality of the large yellow croaker(Larimichthys crocea).Three iso-nitroge...The present study investigated the effects of varying protein source combinations and feeding strategies on the growth,health and organoleptic quality of the large yellow croaker(Larimichthys crocea).Three iso-nitrogenous and iso-lipidic diets were formulated.The control diet was made with 62%fish meal(FM).The other two experimental diets were formulated by replacing 45%FM with 22.5%mealworm(TM)and 22.5%cottonseed protein concentrate(CPC),or with 22.5%TM and 22.5%Clostridium autoethanogenum protein(CAP),respectively.The three kinds of diet were named as A1,A2 and A3,respectively.Five groups of large yellow croaker were fed with two different strategies:the first three groups were continuously fed with A1,A2 and A3 diets,respectively.The fourth group was alternately fed with A1 and A2 diet every 5 days.The fifth group was alternately fed with A1 and A3diet every 5 days.The five groups were named D1,D2,D3,D1-2 and D1-3,respectively.Results showed that D2 and D3 groups exhibited significantly lower weight gain rate(WGR)and higher feed conversion ratios(FCR)compared to the D1 group.The D1-2 and D1-3 groups exhibited improved WGR and significantly reduced FCR compared to the D2 and D3 groups.The A2 and A3 diets significantly suppressed digestive enzymes'activities compared to A1,whereas alternate-feeding groups significantly enhanced the enzyme activities.Compared to the D1 group,D2 and D3 groups significantly downregulated mRNA expression levels of intestinal antiinflammatory cytokines and upregulated the expression of pro-inflammatory mediators.The anti-inflammatory abilities in the D1-2and D1-3 groups were significantly higher than those in the D2 and D3 groups.Additionally,diets containing TM+CAP and TM+CPC protein sources enhanced ventral redness and yellowness indices.Considering the growth,digestion,immunity and organoleptic quality of large yellow croaker,it is recommended to replace up to 45%of FM with TM+CPC and use an alternate-feeding strategy.展开更多
Galanin is a neuropeptide widely expressed in the brain.It is implicated in energy expenditure,feeding,and the regulation of body weight.Numerous studies have revealed that galanin regulates food intake via galanin re...Galanin is a neuropeptide widely expressed in the brain.It is implicated in energy expenditure,feeding,and the regulation of body weight.Numerous studies have revealed that galanin regulates food intake via galanin receptors,5-HT1A receptor and adrenergic α-2 receptor.In this review,we summarize recent findings that reveal the essential role of galanin in increasing food intake as well as body weight and that identify the individual galanin receptor subtypes involved in the brain＇s modulation of food intake and energy expenditure,to provide a theoretical basis for further studies of different aspects of galanin action.展开更多
Ultrasonic vibration feeding（UVF） method which can quantitatively feed and precisely deposit fine powder is a potential technique for micro feeding.The excitation sources transmit vibration to capillary though the t...Ultrasonic vibration feeding（UVF） method which can quantitatively feed and precisely deposit fine powder is a potential technique for micro feeding.The excitation sources transmit vibration to capillary though the third medium for most UVF devices.The vibrator is directly touched with the capillary can transmit mechanical energy on the capillary as much as possible,and the powder feeding can be controlled more precise.However,there are few reports about it.A direct UVF system which integrates the function of micro feeding,process observing,and powder forming was developed in this work.In order to analyze the effect of the system factors on feeding,a group of L9（3^3） orthogonal experiments are selected to confirm the effect of level change of factors.The three factors are capillary nozzle diameter,amplitude and signal.The flow rate was stable for each combined factors,and the optimum combination for the minimum flow rate are choosing small capillary,small amplitude,and triangular wave orderly.The whole process of feeding includes start point,middle stage and stop stage.Starting of feeding was synchronized to vibration when the amplitude of capillary nozzle is larger than critical amplitude.Then,the feeding process enters the middle stage,the feeding state is observed by the CCD,and it is very stable in the middle stage.Overflow of feeding can＇t be eliminated during the stop stage.The features of the deposited powder lines are analyzed; the overflow can be diminished by choosing small capillary and appropriate ratio of the capillary nozzle diameter to the particle size.Chinese characters lattices were deposited to validate the ability of quantitatively feeding and fixed feeding of UVF.Diameters of all powder dots show normal distribution,and more than 60% dots are concentrated from 550 μm to 650 μm,and the average diameter for all the dots is 597 μm.Most dots positions are well approached to their scheduled positions,and the maximum deviation is 0.27 mm.The new direct UVF system is used to implement experiments,which confirms the precise controllable of feeding.According improve the feeding technique,it suits well for rapid prototyping,chemistry,pharmaceutics and many other fields,which require precise measurement and feed minim powder.展开更多
The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, en...The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, energy and aviation industries. High availability of the CNC heavy-duty lathes is demanded to guarantee the efficiency and benefit of these manufacturing industries. As one of the key subsystems of the HDHLs, the feeding control system is studied in this paper on reliability modeling and reliability analysis. The fault tree analysis(FTA) method is used for reliability modelling of the feeding control system. Considering the multiple common cause failure groups(CCFGs) existing in the system, a modified beta factor parametric model is introduced to model the common cause failure(CCF) in system. The reliability of feeding control system is then obtained and the effect of CCF on the reliability of the whole system is studied as well.展开更多
BACKGROUND Early oral feeding(EOF)is an important measure for early recovery of patients with gastrointestinal tumors after surgery,which has emerged as a safe and effective postoperative strategy for improving clinic...BACKGROUND Early oral feeding(EOF)is an important measure for early recovery of patients with gastrointestinal tumors after surgery,which has emerged as a safe and effective postoperative strategy for improving clinical outcomes.AIM To determine the safety and efficacy of early oral feeding in postoperative patients with upper gastrointestinal tumor.METHODS This meta-analysis was analyzed using Review Manager version 5.3 and Stata version 14.All clinical studies that analyzed efficacy and safety of EOF for postoperative patients with upper gastrointestinal tumor were included.RESULTS Fifteen studies comprising 2100 adult patients met all the inclusion criteria.A significantly lower risk of pneumonia was presented in the EOF compared with TOF group[relative risk(RR)=0.63,95%confidence interval(CI):0.44-0.89,P=0.01].Length of hospital stay was significantly shorter in the EOF group than in the TOF group[weighted mean difference(WMD)=-1.91,95%CI:-2.42 to-1.40;P<0.01].Cost of hospitalization was significantly lower(WMD=-4.16,95%CI:-5.72 to-2.61;P<0.01),and CD4 cell count and CD4/CD8 cell ratio on postoperative day 7 were significantly higher in the EOF group than in the TOF group:CD4 count(WMD=7.17,95%CI:6.48-7.85;P<0.01),CD4/CD8 ratio(WMD=0.29,95%CI:0.23-0.35;P<0.01).There was no significant difference in risk of anastomotic leak and total postoperative complications.CONCLUSION EOF as compared with TOF was associated with lower risk of pneumonia,shorter hospital length of stay,lower cost of hospitalization,and significantly improved postoperative immune function of patients.展开更多
The grinding process in concentration plants of the metallurgical industry is of great importantce.. A mineral feed- ing SCADA system in the grinding process was designed with the idea of integrating management and co...The grinding process in concentration plants of the metallurgical industry is of great importantce.. A mineral feed- ing SCADA system in the grinding process was designed with the idea of integrating management and control functions. A detailed design and realization method of control and supervisory control levels in the system was introduced. At the control level, with an algorithm of a separate integrated PID, four mineral feeding machines are run in turn. The supervisory control level can generate process flow graphs, statistical report forms, historical trends and at the same time, it has the functions of alarm, system administration, user login, etc. After the mineral SCADA system has been started, the mineral feeding is very stable, the workstation completely supervises and controls the entire process of mineral feeding, and at the same time histori- cal data is shown and questions can be answered conveniently. The system runs well in the MeiShan Concentration Plant of the Shanghai Bao Shan Steel Group.展开更多
A vibration feeder is a piece of equipment for rationing and conveying powder,particle and block materials.In order to test the regeneration performance of de-dusting medium for high-temperature coal gas,a set of de-d...A vibration feeder is a piece of equipment for rationing and conveying powder,particle and block materials.In order to test the regeneration performance of de-dusting medium for high-temperature coal gas,a set of de-dusting medium-feeding systems was designed quantitatively.The de-dusting medium-feeding system is used in the gasification process for cleaning coal gas.The system is mainly composed of a hopper unit,control unit and feeding unit.In order to optimize the feeding stability of the coal-gas dust-removal medium vibration feeding system,the setting and scope of the following design factors and operating factors are investigated.Specifically,it includes the influence of gate-valve-opening adjustment of the control unit on the feeding stability of a vibrating feeding system;the influence of the gap size of the dipleg of the control unit on the feeding sensitivity of the vibration system;the influence of the particle size of the de-dusting medium on the operating range of the vibrating feeding system;the influence of the digitization of the working-current indicator of electromagnetic vibrating feeders on measurement variation and the process variation of a vibration feeding system.This vibration feeding system can realize the function of precise and quantitative feeding of the de-dusting medium,which can meet the design requirements of subsequent experimental research.展开更多
Background： Feeding behavior study is important for animal husbandry and production. However, few studies were conducted on the feeding behavior and their relationship with feeding efficiency in Pekin ducks. In order...Background： Feeding behavior study is important for animal husbandry and production. However, few studies were conducted on the feeding behavior and their relationship with feeding efficiency in Pekin ducks. In order to investigate the feeding behavior and their relationship with feed efficiency and other economic traits in Pekin ducks, we selected 358 male Pekin ducks and recorded feeding information between 3 to 6 wk of age using automatic electronic feeders, and compared the feeding behavior under different residual feed intake（RFI） levels.Results： We observed that total feed time, daily feed intake and feed intake per meal had strong positive correlations with feed efficiency traits; moreover, strong correlation between feed intake per meal and body weight was found（R=0.32, 0.36）. Daily feeding rate meal and meal duration had weak correlations with feed efficiency（R=0.14~0.15）. The phenotypic correlation of between-meal pauses, with feed efficiency was not observed. When daily changes were analyzed, high RFI ducks had the highest feed consumption over all times, and obvious differences in daily visits were found among different RFI level animals during the middle period; these differences were magnified with age, but there was no difference in daily meal number. Moreover, our data indicate that high RFI birds mainly take their meals at the edge of the population enclosure, where they are more susceptible to environmental interference.Conclusions： Overal, this study suggests that the general feeding behaviors can be accurately measured using automatic electronic feeders and certain feeding behaviors in Pekin ducks are associated with improved feed efficiency.展开更多
A study was conducted in Northern Province of Rwanda, from the College of Agriculture and Veterinary Medicine, Busogo Campus located in Musanze district to evaluate the effect of feed type on rabbit growth in rabbit i...A study was conducted in Northern Province of Rwanda, from the College of Agriculture and Veterinary Medicine, Busogo Campus located in Musanze district to evaluate the effect of feed type on rabbit growth in rabbit intensification systems in Rwanda. The Complete Randomized Design (CRD) was used and data were collected on rabbit growth weekly for a period of 12 weeks. The experiment was composed of three treatments replicated ten times. The treatments included three types of feeds namely;cabbage combined with Mucuna pruriens added to local forage (I), cabbages combined with Leucaena leucocephala added to local forage (II) and a control composed of other varieties of locally available forage, such as Bidens pilosa, Crassocephalum vitellium and Galinsoga parviflora (III) which was considered as the control (Farmers practice). The feeds were given to ten rabbits separated in individual cages, and each rabbit was considered a replicate. Water was given ad libitum. One month old rabbits (weaners) were used and data were collected after one week of adaptation for 12 weeks. The results showed that the mean of weight gain after 12 weeks was 783.3 g, 760.7 g and 705.7 g for feed type I, II and III respectively. The difference between means of feed types after 12 weeks was not significant (p > 0.5), which implied that rabbit growth did not depend on the feed type. The mean weight gain after 8 weeks was 707.5 g, 661.4 g and 577.1 g for feed type I, II and III respectively. At 8 weeks, the difference between means of feed types was significant (p Mucuna pruriens combined with cabbage and local forage were growing faster than rabbits from other treatments at 8 weeks. The researchers recommended that farmers should be facilitated with feeding materials by the concerned institutions. Training of rabbit farmers and further researches on locally available feeding materials were also given as recommendations at the end of this study.展开更多
The effects of different feeds and feeding regimes on growth performance, flesh quality and fecal viscosity of Atlantic salmon （Salmo salar L.） in recirculating aquaculture systems （R.AS） were investigated. Fish ...The effects of different feeds and feeding regimes on growth performance, flesh quality and fecal viscosity of Atlantic salmon （Salmo salar L.） in recirculating aquaculture systems （R.AS） were investigated. Fish （initial body weight of 1677 g＋ 157 g） were fed with four commercial feeds （Nosan salmon-NS, Aller gold-AG, Skretting salmon-SS and Hart ye-HY） in two feeding regimes （80% and 100% satiation） for 78 d. The results showed that salmon specific growth ratio （SGR） and weight gain ratio （WGR） were significantly affected by feed type and feeding regime （P〈0.05）. Feed conversion ratio （FCR） varied between 0.93 and 3.40, which was significantly affected by feed type （P〈0.05）, and slightly improved with increased satiation degree. The activities of digestive enzymes including protease, lipase and amylase were also significantly affected by feed type and feeding regime （P〈0.05）, increasing with satiation degree. Flesh qualities for vitamin E, hydroxyproline （HYP）, liquid loss and muscle pH among all groups showed significant differences （P〈0.05）, ranging from 26.67 to 29.67, while no obvious difference was found in flesh color. Fecal viscosity for different treatments showed no significant difference, though improvement was found in 100% satiation group. From present experiment, it was concluded that both feed type and feeding regime can affect the important quality attributes of Atlantic salmon.展开更多
To precisely meet the nutritional requirements of sows during the stages of pregnancy and lactation,a precision feeding system was developed by using the intelligent sow feeder combined with a rule-based expert system...To precisely meet the nutritional requirements of sows during the stages of pregnancy and lactation,a precision feeding system was developed by using the intelligent sow feeder combined with a rule-based expert system and the Internet of Things(IoTs).The model of uncertain knowledge representation was established for inference by using the certainty factor.The daily feeding amount of each sow was calculated by the expert system.An improved pattern matching algorithm Reused Degree Model-RETE(RDM-RETE)was proposed for the decision of daily feeding amount,which sped up inference by optimizing the RETE network topology.A prediction model of daily feeding amount was established by a rule-based expert system and the precision feeding was achieved by an accurate control technology of variable volume.The experimental results demonstrated that the HASH-RDM-RETE algorithm could effectively reduce the network complexity and improve the inference efficiency.The feeding amount decided by the expert system was a logarithmic model,which was consistent with the feeding law of lactating sows.The inferential feeding amount was adopted as the predicted feed intake and the coefficient of correlation between predicted feed intake and actual feed intake was greater than or equal to 0.99.Each sow was fed at different feeding intervals and different feed amounts for each meal in a day.The feed intake was 26.84% higher than that of artificial feeding during lactation days(p<0.05).The piglets weaned per sow per year(PSY)can be increased by 1.51 compared with that of relatively high levels in domestic pig farms.This system is stable in feeding and lowers the breeding cost that can be applied in precision feeding in swine production.展开更多
文摘The availability of local feed resources in various seasons can contribute as essential sources of carbohydrate and protein which significantly impact rumen fermentation and the subsequent productivity of the ruminant.Recent developments,based on enriching protein in cassava chips,have yielded yeast fermented cassava chip protein（YEFECAP） providing up to 47.5% crude protein（CP）,which can be used to replace soybean meal.The use of fodder trees has been developed through the process of pelleting;Leucaena leucocephala leaf pellets（LLP）,mulberry leaf pellets（MUP） and mangosteen peel and/or garlic pellets,can be used as good sources of protein to supplement ruminant feeding.Apart from producing volatile fatty acids and microbial proteins,greenhouse gases such as methane are also produced in the rumen.Several methods have been used to reduce rumen methane.However,among many approaches,nutritional manipulation using feed formulation and feeding management,especially the use of plant extracts or plants containing secondary compounds（condensed tannins and saponins） and plant oils,has been reported.This approach could help todecrease rumen protozoa and methanogens and thus mitigate the production of methane.At present,more research concerning this burning issue-the role of livestock in global warming-warrants undertaking further research with regard to economic viability and practical feasibility.
文摘To improve the accuracy of fault location system, several short-circuit tests need to be conducted before being brought into service in autotransformer （AT） feeding systems for high-speed railways in China. However, no systematic algorithm yet exists to evaluate the consistency of the current distribution of short-circuit tests. A methodology is proposed in this paper to address this problem. Based on Kirchhoff’s current law and the generalized method of symmetrical components, the current deviations of the AT feeding systems are analysed and then normalized with the short-circuit current as they vary greatly with systems and short-circuit sites. It is also found that the short-circuit current varies with the calculation methods, and its unbiased standard deviation also reflects the consistency of the short-circuit test. The mean and maximum of the current deviations, as well as the unbiased standard deviation of the short-circuit current, show the consistency of the short-circuit test from different aspects,although the last two items are highly relevant. Therefore, a unified evaluation index is defined as the sum of the three items, and then applied in two case studies to test its performance. The results show that, the proposed index canclearly distinguish the consistency of the short-circuit tests and may be used to sort the short-circuit tests for fault location systems. Besides, some short-circuit tests may have very poor consistency indices, and thus are not applicable to the tuning of fault location systems. In the authors’ opinion, the determination of the threshold of the proposed index needs further investigation.
基金Project(2012AA041801)supported by the High-tech Research and Development Program of China
文摘A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of CFS is subjected to unknown load characteristics of rock or soil; in addition,the geological condition is time-varying.Due to the complex load characteristics of rock or soil,the feeding velocity of TC is related to geological conditions.What is worse,its dynamic model is subjected to uncertainties and its function is unknown.To deal with the particular characteristics of CFS,a novel adaptive fuzzy integral sliding mode control(AFISMC) was designed for feeding pressure control of CFS,which combines the robust characteristics of an integral sliding mode controller and the adaptive adjusting characteristics of an adaptive fuzzy controller.The AFISMC feeding pressure controller is synthesized using the backstepping technique.The stability of the overall closed-loop system consisting of the adaptive fuzzy inference system,integral sliding mode controller and the cutter feeding system is proved using Lyapunov theory.Experiments are conducted on a TC test bench with the AFISMC under different operating conditions.The experimental results demonstrate that the proposed AFISMC feeding pressure controller for CFS gives a superior and robust pressure tracking performance with maximum pressure tracking error within ?0.3 MPa.
基金Project(NECT-04-0748) supported by New Century Excellent Talents Program of China
文摘In order to utilize the spontaneous accumulation of heat (SAH) reasonably and obtain the high quality sinter with low energy consumption, a lower fuel consumption modeling based on raw materials of a certain steel works was built. An air-flow segregation feeding (ASF) experimental equipment was designed to simulate strand feeding process and calculate the lower fuel consumption quantity. Compared with baseline test, the ASF experimental equipment was adopted. The results of sinter pot tests show that the solid fuel consumption is lower than that in baseline test, which is decreased by 5.8%. Meanwhile, other sinter indexes, such as pan yeild, tumbler strength and strand productivity are improved. The mineralogical examination indicates that the mineral compositions and micostructures are improved in sinter.
基金NationalNatureScienceFoundation (No .5 9775 0 62 )
文摘With the background of the control of additional mechanical force droplet transfer in MIG/MAG welding, regarding the AC servo motor as core, a novel oscillating wire feeding system has been developed with excellent performances of control and dynamic acceleration which is tested. System constitution and operation principle are introduced in this paper. Influences of parameters on dynamic acceleration performance are analyzed and discussed emphatically, such as oscillating frequency, oscillating amplitude and draw-back speed. Experimental result indicates that according to the technique of welding control, the novel wire feeding system responds rapidly to various kinds of control orders of wire feeding and draw-back, and realizes flexible control of welding wire axial movement, including dynamic shifting,oscillating and so on.
文摘A 1：1 water model of a twin-roll strip caster was set up based on the Froude number（Fr） and Reynolds number （Re） similarity criteria. Fluctuation and the mixing effect in the molten pool of twin-roll strip casting process were analyzed through hydraulic simulation. The height of the fluctuation of the liquid pool surface and the residence time were measured by DJ800 multifunctional monitor under different process conditions. The results show that the casting velocity, the insertion depth and the pool level have a great effect on the fluctuation.
文摘Fifty Holstein cows (2.6 ± 1.0 lactations) in early lactation (52.6 ± 16.4 days in milk) calved in autumn and producing 34.3 (±4.4) kg milk per cow·day-1 were randomly assigned for 27 weeks to one of two treatments (feeding systems) in 10 groups (pens) of 5 animals each (5 groups/treatment). The confined treatment was a total mixed ration (TMR_100) whereas the supplemented grazing system was defined by a partially mixed ration (PMR_75) with 75% TMR and 25% oat pasture (Avena sativa L.) during the autum-winter (Period I) and alfalfa pasture (Medicago sativa L.) plus concentrate (7.0 kg per cow·day-1) (P + C) during the next spring (Period II). Milk production was daily and individually recorded throughout the trial while the chemical composition of milk was measured on individual samples every 2 weeks. Live weight (LW) and body condition score (BCS) using a scale of 1 to 5 were recorded every 3 weeks after the morning milking. Simultaneously, blood samples were taken for determinations of glucose, urea, non-esterified fatty acids (NEFA), insulin, somatotrophin (GH) and somatomedin C (IGF-I). Total DM intake was measured using the difference method four times per repetition in the months of July, August, September and October. The experimental herd was inseminated at fixed time at the start of the service (May-July) and on the return with estrus detection. The diagnosis of pregnancy was made by transrectal ultrasonography at 30 and 60 days after the start of the service. The productive data were analyzed according to a model with repeated observations in time adjusted by covariate with 2 periods and using the animal as the experimental unit. Data of DM intake were analyzed using ANOVA for 2 treatments with 5 repetitions. Cows from the TMR_100 group produced more milk (kg·cow-1·day-1) during Period I (33.7 vs. 32.3) and Period II (28.8 vs. 27.8) (P ·cow-1·day-1) in Periods I (1.33 vs. 1.24) and II (1.10 vs. 0.92) and for milk protein (1.19 vs. 1.13 and 0.99 vs. 0.93). The lower energy intake of grazing cows (45.0 vs. 43.1 and 40.9 vs. 38.9 Mcal per?cow·day-1 for TMR_100 vs. PMR_75 and TMR_100 vs. P + C) coupled to the extra energy cost associated with grazing activity would explain the difference in milk production. Milk protein content (%) resulted higher (P kg·cow-1·day-1) in the cows of the TMR_100 group in both periods (0.69 vs. 0.34 and 0.49 vs. -0.22) was consistent with the increase in the plasmatic levels of glucose and IGF-I and the reduction in the circulating levels of GH, but not with the lack of increases in plasma insulin concentration or decreases in circulating levels of NEFA, parameters that were not affected by treatments. Despite the positive effects of TMR_100 on parameters linked to energy balance, no significant differences were detected in any of the reproductive parameters evaluated and the final rate of pregnancy was 80.0 and 91.3% for the confined and grazing system with supplementation respectively. Free milk liters over feeding costs were higher in the grazing system with supplementation compared to the confined system (18.5 vs. 15.5 l, respectively). The results indicate that the grazing system with supplementation can be economically competitive compared to the confined system of milk production.
文摘In this paper, we conduct research on the high-end feeding system and the application scenarios on the lake sheep barn feeding scale breeding technology research. Sheep farm reproduction for the main places, so make sure sheep pen set reasonable. At the same time, we should reduce/avoid adverse effects caused by the surroundings of the flock, and conducive to the sheep’s normal growth and reproduction.Goats engineering technology mainly includes process of design and construction, building facilities, environmental control, waste treatment technology, sheep product processing technology, such as sheep breeding engineering technology is connected to the biological technology. This paper integrates the related theories to propose the countermeasures that will be meaningful.
文摘The medium -large caliber naval gun is still playing an important role in modern war. The development of highly automatic Shell Raising and Feeding System (SRFS) in the world has been briefly outlined. Several typical SRFS of medium-large caliber naval guns have been analyzed. A re-design of the system is introduced, in which systematic design method has been used to demonstrate its feasibility. The design goal of the system is to realize rapid shell feeding, with application to many types of shells, quick change of shell types , accurate and reliable feeding operation, simple mechanical structure and easy realization of shell withdrawing.
基金financially supported by the Key Research and Development Program of Shandong,China(No.2021SFGC0701)。
文摘The present study investigated the effects of varying protein source combinations and feeding strategies on the growth,health and organoleptic quality of the large yellow croaker(Larimichthys crocea).Three iso-nitrogenous and iso-lipidic diets were formulated.The control diet was made with 62%fish meal(FM).The other two experimental diets were formulated by replacing 45%FM with 22.5%mealworm(TM)and 22.5%cottonseed protein concentrate(CPC),or with 22.5%TM and 22.5%Clostridium autoethanogenum protein(CAP),respectively.The three kinds of diet were named as A1,A2 and A3,respectively.Five groups of large yellow croaker were fed with two different strategies:the first three groups were continuously fed with A1,A2 and A3 diets,respectively.The fourth group was alternately fed with A1 and A2 diet every 5 days.The fifth group was alternately fed with A1 and A3diet every 5 days.The five groups were named D1,D2,D3,D1-2 and D1-3,respectively.Results showed that D2 and D3 groups exhibited significantly lower weight gain rate(WGR)and higher feed conversion ratios(FCR)compared to the D1 group.The D1-2 and D1-3 groups exhibited improved WGR and significantly reduced FCR compared to the D2 and D3 groups.The A2 and A3 diets significantly suppressed digestive enzymes'activities compared to A1,whereas alternate-feeding groups significantly enhanced the enzyme activities.Compared to the D1 group,D2 and D3 groups significantly downregulated mRNA expression levels of intestinal antiinflammatory cytokines and upregulated the expression of pro-inflammatory mediators.The anti-inflammatory abilities in the D1-2and D1-3 groups were significantly higher than those in the D2 and D3 groups.Additionally,diets containing TM+CAP and TM+CPC protein sources enhanced ventral redness and yellowness indices.Considering the growth,digestion,immunity and organoleptic quality of large yellow croaker,it is recommended to replace up to 45%of FM with TM+CPC and use an alternate-feeding strategy.
基金supported in part by the grant of Protein Research Program of Yangzhou University,China(2008CXJ062)
文摘Galanin is a neuropeptide widely expressed in the brain.It is implicated in energy expenditure,feeding,and the regulation of body weight.Numerous studies have revealed that galanin regulates food intake via galanin receptors,5-HT1A receptor and adrenergic α-2 receptor.In this review,we summarize recent findings that reveal the essential role of galanin in increasing food intake as well as body weight and that identify the individual galanin receptor subtypes involved in the brain＇s modulation of food intake and energy expenditure,to provide a theoretical basis for further studies of different aspects of galanin action.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2008AA03A238)National Natural Science Foundation of China (Grant No. 51005186)Foundation for the Author of National Excellent Doctoral Dissertation of China (Grant No. 2007B39)
文摘Ultrasonic vibration feeding（UVF） method which can quantitatively feed and precisely deposit fine powder is a potential technique for micro feeding.The excitation sources transmit vibration to capillary though the third medium for most UVF devices.The vibrator is directly touched with the capillary can transmit mechanical energy on the capillary as much as possible,and the powder feeding can be controlled more precise.However,there are few reports about it.A direct UVF system which integrates the function of micro feeding,process observing,and powder forming was developed in this work.In order to analyze the effect of the system factors on feeding,a group of L9（3^3） orthogonal experiments are selected to confirm the effect of level change of factors.The three factors are capillary nozzle diameter,amplitude and signal.The flow rate was stable for each combined factors,and the optimum combination for the minimum flow rate are choosing small capillary,small amplitude,and triangular wave orderly.The whole process of feeding includes start point,middle stage and stop stage.Starting of feeding was synchronized to vibration when the amplitude of capillary nozzle is larger than critical amplitude.Then,the feeding process enters the middle stage,the feeding state is observed by the CCD,and it is very stable in the middle stage.Overflow of feeding can＇t be eliminated during the stop stage.The features of the deposited powder lines are analyzed; the overflow can be diminished by choosing small capillary and appropriate ratio of the capillary nozzle diameter to the particle size.Chinese characters lattices were deposited to validate the ability of quantitatively feeding and fixed feeding of UVF.Diameters of all powder dots show normal distribution,and more than 60% dots are concentrated from 550 μm to 650 μm,and the average diameter for all the dots is 597 μm.Most dots positions are well approached to their scheduled positions,and the maximum deviation is 0.27 mm.The new direct UVF system is used to implement experiments,which confirms the precise controllable of feeding.According improve the feeding technique,it suits well for rapid prototyping,chemistry,pharmaceutics and many other fields,which require precise measurement and feed minim powder.
基金the National Science and Technology Major Project of China(No.2014ZX04014-011)
文摘The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, energy and aviation industries. High availability of the CNC heavy-duty lathes is demanded to guarantee the efficiency and benefit of these manufacturing industries. As one of the key subsystems of the HDHLs, the feeding control system is studied in this paper on reliability modeling and reliability analysis. The fault tree analysis(FTA) method is used for reliability modelling of the feeding control system. Considering the multiple common cause failure groups(CCFGs) existing in the system, a modified beta factor parametric model is introduced to model the common cause failure(CCF) in system. The reliability of feeding control system is then obtained and the effect of CCF on the reliability of the whole system is studied as well.
基金Supported by Danone Nutrition Research and Education Foundation,No.DIC2020-03.
文摘BACKGROUND Early oral feeding(EOF)is an important measure for early recovery of patients with gastrointestinal tumors after surgery,which has emerged as a safe and effective postoperative strategy for improving clinical outcomes.AIM To determine the safety and efficacy of early oral feeding in postoperative patients with upper gastrointestinal tumor.METHODS This meta-analysis was analyzed using Review Manager version 5.3 and Stata version 14.All clinical studies that analyzed efficacy and safety of EOF for postoperative patients with upper gastrointestinal tumor were included.RESULTS Fifteen studies comprising 2100 adult patients met all the inclusion criteria.A significantly lower risk of pneumonia was presented in the EOF compared with TOF group[relative risk(RR)=0.63,95%confidence interval(CI):0.44-0.89,P=0.01].Length of hospital stay was significantly shorter in the EOF group than in the TOF group[weighted mean difference(WMD)=-1.91,95%CI:-2.42 to-1.40;P<0.01].Cost of hospitalization was significantly lower(WMD=-4.16,95%CI:-5.72 to-2.61;P<0.01),and CD4 cell count and CD4/CD8 cell ratio on postoperative day 7 were significantly higher in the EOF group than in the TOF group:CD4 count(WMD=7.17,95%CI:6.48-7.85;P<0.01),CD4/CD8 ratio(WMD=0.29,95%CI:0.23-0.35;P<0.01).There was no significant difference in risk of anastomotic leak and total postoperative complications.CONCLUSION EOF as compared with TOF was associated with lower risk of pneumonia,shorter hospital length of stay,lower cost of hospitalization,and significantly improved postoperative immune function of patients.
文摘The grinding process in concentration plants of the metallurgical industry is of great importantce.. A mineral feed- ing SCADA system in the grinding process was designed with the idea of integrating management and control functions. A detailed design and realization method of control and supervisory control levels in the system was introduced. At the control level, with an algorithm of a separate integrated PID, four mineral feeding machines are run in turn. The supervisory control level can generate process flow graphs, statistical report forms, historical trends and at the same time, it has the functions of alarm, system administration, user login, etc. After the mineral SCADA system has been started, the mineral feeding is very stable, the workstation completely supervises and controls the entire process of mineral feeding, and at the same time histori- cal data is shown and questions can be answered conveniently. The system runs well in the MeiShan Concentration Plant of the Shanghai Bao Shan Steel Group.
文摘A vibration feeder is a piece of equipment for rationing and conveying powder,particle and block materials.In order to test the regeneration performance of de-dusting medium for high-temperature coal gas,a set of de-dusting medium-feeding systems was designed quantitatively.The de-dusting medium-feeding system is used in the gasification process for cleaning coal gas.The system is mainly composed of a hopper unit,control unit and feeding unit.In order to optimize the feeding stability of the coal-gas dust-removal medium vibration feeding system,the setting and scope of the following design factors and operating factors are investigated.Specifically,it includes the influence of gate-valve-opening adjustment of the control unit on the feeding stability of a vibrating feeding system;the influence of the gap size of the dipleg of the control unit on the feeding sensitivity of the vibration system;the influence of the particle size of the de-dusting medium on the operating range of the vibrating feeding system;the influence of the digitization of the working-current indicator of electromagnetic vibrating feeders on measurement variation and the process variation of a vibration feeding system.This vibration feeding system can realize the function of precise and quantitative feeding of the de-dusting medium,which can meet the design requirements of subsequent experimental research.
基金supported by the National Scientific Supporting Projects of China(2015BAD03B06)National Waterfowl-industry Technology Research System(CARS-42)the Program for Changjiang Scholars and Innovative Research Team in University(IRT_15R62)
文摘Background： Feeding behavior study is important for animal husbandry and production. However, few studies were conducted on the feeding behavior and their relationship with feeding efficiency in Pekin ducks. In order to investigate the feeding behavior and their relationship with feed efficiency and other economic traits in Pekin ducks, we selected 358 male Pekin ducks and recorded feeding information between 3 to 6 wk of age using automatic electronic feeders, and compared the feeding behavior under different residual feed intake（RFI） levels.Results： We observed that total feed time, daily feed intake and feed intake per meal had strong positive correlations with feed efficiency traits; moreover, strong correlation between feed intake per meal and body weight was found（R=0.32, 0.36）. Daily feeding rate meal and meal duration had weak correlations with feed efficiency（R=0.14~0.15）. The phenotypic correlation of between-meal pauses, with feed efficiency was not observed. When daily changes were analyzed, high RFI ducks had the highest feed consumption over all times, and obvious differences in daily visits were found among different RFI level animals during the middle period; these differences were magnified with age, but there was no difference in daily meal number. Moreover, our data indicate that high RFI birds mainly take their meals at the edge of the population enclosure, where they are more susceptible to environmental interference.Conclusions： Overal, this study suggests that the general feeding behaviors can be accurately measured using automatic electronic feeders and certain feeding behaviors in Pekin ducks are associated with improved feed efficiency.
文摘A study was conducted in Northern Province of Rwanda, from the College of Agriculture and Veterinary Medicine, Busogo Campus located in Musanze district to evaluate the effect of feed type on rabbit growth in rabbit intensification systems in Rwanda. The Complete Randomized Design (CRD) was used and data were collected on rabbit growth weekly for a period of 12 weeks. The experiment was composed of three treatments replicated ten times. The treatments included three types of feeds namely;cabbage combined with Mucuna pruriens added to local forage (I), cabbages combined with Leucaena leucocephala added to local forage (II) and a control composed of other varieties of locally available forage, such as Bidens pilosa, Crassocephalum vitellium and Galinsoga parviflora (III) which was considered as the control (Farmers practice). The feeds were given to ten rabbits separated in individual cages, and each rabbit was considered a replicate. Water was given ad libitum. One month old rabbits (weaners) were used and data were collected after one week of adaptation for 12 weeks. The results showed that the mean of weight gain after 12 weeks was 783.3 g, 760.7 g and 705.7 g for feed type I, II and III respectively. The difference between means of feed types after 12 weeks was not significant (p > 0.5), which implied that rabbit growth did not depend on the feed type. The mean weight gain after 8 weeks was 707.5 g, 661.4 g and 577.1 g for feed type I, II and III respectively. At 8 weeks, the difference between means of feed types was significant (p Mucuna pruriens combined with cabbage and local forage were growing faster than rabbits from other treatments at 8 weeks. The researchers recommended that farmers should be facilitated with feeding materials by the concerned institutions. Training of rabbit farmers and further researches on locally available feeding materials were also given as recommendations at the end of this study.
基金supported by the National Key Technologies R&D Program(2011BAD13B04)the earmarked fund for Modern Agro-industry Technology Research System(CARS-48)the National Natural Science Foundation of China(No.31240012)
文摘The effects of different feeds and feeding regimes on growth performance, flesh quality and fecal viscosity of Atlantic salmon （Salmo salar L.） in recirculating aquaculture systems （R.AS） were investigated. Fish （initial body weight of 1677 g＋ 157 g） were fed with four commercial feeds （Nosan salmon-NS, Aller gold-AG, Skretting salmon-SS and Hart ye-HY） in two feeding regimes （80% and 100% satiation） for 78 d. The results showed that salmon specific growth ratio （SGR） and weight gain ratio （WGR） were significantly affected by feed type and feeding regime （P〈0.05）. Feed conversion ratio （FCR） varied between 0.93 and 3.40, which was significantly affected by feed type （P〈0.05）, and slightly improved with increased satiation degree. The activities of digestive enzymes including protease, lipase and amylase were also significantly affected by feed type and feeding regime （P〈0.05）, increasing with satiation degree. Flesh qualities for vitamin E, hydroxyproline （HYP）, liquid loss and muscle pH among all groups showed significant differences （P〈0.05）, ranging from 26.67 to 29.67, while no obvious difference was found in flesh color. Fecal viscosity for different treatments showed no significant difference, though improvement was found in 100% satiation group. From present experiment, it was concluded that both feed type and feeding regime can affect the important quality attributes of Atlantic salmon.
基金financially supported by the National Natural Science Foundation of China(Grant No.31172243)Agricultural Science and Technology Independent Innovation Fund Project[CX(16)1006]of Jiangsu Province,China.
文摘To precisely meet the nutritional requirements of sows during the stages of pregnancy and lactation,a precision feeding system was developed by using the intelligent sow feeder combined with a rule-based expert system and the Internet of Things(IoTs).The model of uncertain knowledge representation was established for inference by using the certainty factor.The daily feeding amount of each sow was calculated by the expert system.An improved pattern matching algorithm Reused Degree Model-RETE(RDM-RETE)was proposed for the decision of daily feeding amount,which sped up inference by optimizing the RETE network topology.A prediction model of daily feeding amount was established by a rule-based expert system and the precision feeding was achieved by an accurate control technology of variable volume.The experimental results demonstrated that the HASH-RDM-RETE algorithm could effectively reduce the network complexity and improve the inference efficiency.The feeding amount decided by the expert system was a logarithmic model,which was consistent with the feeding law of lactating sows.The inferential feeding amount was adopted as the predicted feed intake and the coefficient of correlation between predicted feed intake and actual feed intake was greater than or equal to 0.99.Each sow was fed at different feeding intervals and different feed amounts for each meal in a day.The feed intake was 26.84% higher than that of artificial feeding during lactation days(p<0.05).The piglets weaned per sow per year(PSY)can be increased by 1.51 compared with that of relatively high levels in domestic pig farms.This system is stable in feeding and lowers the breeding cost that can be applied in precision feeding in swine production.
