A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when...A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.展开更多
A high-speed distributed feedback laser based on the reconstruction equivalent chirp technology has been proposed and demonstrated. Due to the enhanced detuned loading and the photon–photon resonance effect, the 3-dB...A high-speed distributed feedback laser based on the reconstruction equivalent chirp technology has been proposed and demonstrated. Due to the enhanced detuned loading and the photon–photon resonance effect, the 3-dB modulation bandwidth is improved to 29 GHz. Utilizing the proposed method, the relative intensity noise is reduced to below-156.37 dB/Hz,and the frequency chirp is decreased from 4.74 to 2.58. Moreover, the modulation maintains excellent linearity, with a 1-dB compression point of more than 18 d Bm.展开更多
Quantum cascade lasers(QCLs) have broad application potentials in infrared countermeasure system,free-space optical communication and trace gas detection.Compared with traditional Fabry-Pérot(FP) cavity and exter...Quantum cascade lasers(QCLs) have broad application potentials in infrared countermeasure system,free-space optical communication and trace gas detection.Compared with traditional Fabry-Pérot(FP) cavity and external cavity,distributed feedback quantum cascade lasers(DFB-QCLs) can obtain narrower laser linewidth and higher integration.In this paper,the structure design,numerical simulation and optimization of the Bragg grating of DFB-QCLs are carried out to obtain the transmission spectrum with central wavelength at 4.6 μm.We analyze the relationship among the structure parameters,the central wavelength shift and transmission efficiency using coupled-wave theory and finite-difference time-domain(FDTD) method.It is shown that the increase in the number of grating periods enhances the capabilities of mode selectivity,while the grating length of a single period adjustment directly determines the Bragg wavelength.Additionally,variations in etching depth and duty cycle lead to blue and red shifts in the central wavelength,respectively.Based on the numerical simulation results,the optimized design parameters for the upper buffer layer and the upper cladding grating are proposed,which gives an optional scheme for component fabrication and performance improvement in the future.展开更多
High-strained InGaAs/InGaAsP multiple quantum wells （MQWs） distributed feedback （DFB） lasers, fab- ricated using metal organic chemical vapor deposition, are presented at 1,82 μm with a high side-mode- suppressio...High-strained InGaAs/InGaAsP multiple quantum wells （MQWs） distributed feedback （DFB） lasers, fab- ricated using metal organic chemical vapor deposition, are presented at 1,82 μm with a high side-mode- suppression ratio of 49.53 dB. The current- and temperature-tuning rates of the DFB mode wavelength are 0.01 nm/mA and 0.13 nm/℃, respectively. A characteristic temperature of 51 K is also confirmed. The DFB laser demonstrates good performance and can be apt）lied to H2O concentration sensing.展开更多
We experimentally demonstrated that the distributed feedback(DFB) lasers with the active distributed reflector achieved a 25.8 Gb/s operation over a wide temperature range of -40 to 85℃. The DFB lasers can achieve ad...We experimentally demonstrated that the distributed feedback(DFB) lasers with the active distributed reflector achieved a 25.8 Gb/s operation over a wide temperature range of -40 to 85℃. The DFB lasers can achieve additional feedback from an active distributed reflector with accurately controlled phase, and single-mode yields are not related to the position of cleave. The threshold currents of the fabricated laser are 6 mA and 20 mA at -40℃ and 85℃, respectively. The side mode suppression ratio of the fabricated laser is above 50 dB at all temperatures. Transmissions of 25.8 Gb/s after 10 km single-mode fibers with clear eye openings and less than 0.8 dB power penalty over a wide temperature range have been demonstrated as well.展开更多
By employing a simple model of describing three-level lasers, we have theoretically investigated the effect of photon lifetime on the output dynamics of Er-doped distributed feedback fibre lasers. And based on the the...By employing a simple model of describing three-level lasers, we have theoretically investigated the effect of photon lifetime on the output dynamics of Er-doped distributed feedback fibre lasers. And based on the theoretical analysis we have proposed a promising method to suppress self-pulsing behaviour in the fibre lasers.展开更多
We report the InAs/GaAs quantum dot laterally coupled distributed feedback(LC-DFB)lasers operating at room temperature in the wavelength range of 1.31μm.First-order chromium Bragg gratings were fabricated alongside t...We report the InAs/GaAs quantum dot laterally coupled distributed feedback(LC-DFB)lasers operating at room temperature in the wavelength range of 1.31μm.First-order chromium Bragg gratings were fabricated alongside the ridge waveguide to obtain the maximum coupling coefficient with the optical field.Stable continuous-wave single-frequency operation has been achieved with output power above 5 mW/facet and side mode suppression ratio exceeding 52 dB.Moreover,a single chip integrating three LC-DFB lasers was tentatively explored.The three LC-DFB lasers on the chip can operate in single mode at room temperature,covering the wavelength span of 35.6 nm.展开更多
Monolithic electro absorption modulated distributed feedback(DFB) lasers are proposed and fabricated by using a modified double stack active layer.The 38mA threshold,9dB extinction ratio (from 0 5V to 3 0V),and ab...Monolithic electro absorption modulated distributed feedback(DFB) lasers are proposed and fabricated by using a modified double stack active layer.The 38mA threshold,9dB extinction ratio (from 0 5V to 3 0V),and about 5mW output power at the 100mA operation current are achieved.Compared with other reported results (only 1 5mW at the same operation current) of the traditional stack active structure,the proposed structure improves the output power of devices.展开更多
A 7.8-μm surface emitting second-order distributed feedback quantum cascade laser （DFB QCL） structure with metallized surface grating is studied. The modal property of this structure is described by utilizing coupl...A 7.8-μm surface emitting second-order distributed feedback quantum cascade laser （DFB QCL） structure with metallized surface grating is studied. The modal property of this structure is described by utilizing coupled-mode theory where the coupling coefficients are derived from exact Floquet-Bloch solutions of infinite periodic structure. Based on this theory, the influence of waveguide structure and grating topography as well as device length on the laser performance is numerically investigated. The optimized surface emitting second-order DFB QCL structure design exhibits a high surface outcoupling efficiency of 22% and a low threshold gain of 10 cm-1. Using a π phase-shift in the centre of the grating, a high-quality single-lobe far-field radiation pattern is obtained.展开更多
The 795 nm distributed feedback lasers have great application in pumping the Rb D1 transition.In this paper,in order to realize specific 795 nm lasing,we designed tilted ridge distributed feedback lasers based on pure...The 795 nm distributed feedback lasers have great application in pumping the Rb D1 transition.In this paper,in order to realize specific 795 nm lasing,we designed tilted ridge distributed feedback lasers based on purely gain coupled effect induced by periodic current injection windows through changing the angle of the tilted ridge.The fabricated devices were cleaved into 2 mm-cavity-length,including 5 tilted angles.The peak output powers of all devices were above 30 mW.Single longitudinal mode lasing was realized in all tilted Fabry-Perot cavities using periodic current injection windows,with side mode suppression ratio over 30 dB.The total wavelength range covered 8.656 nm at 20℃.It was disclosed theoretically and experimentally that the output powers,threshold currents,and central wavelengths of the tilted ridge purely gain coupled DFB lasers were relevant to the tilted angles.The results will be instructive for future design of DFB laser arrays with different central wavelengths.展开更多
By etching a second-order grating directly into the Al-free optical waveguide region of a ridgewaveguide（RW） AlGaInAs/AlGaAs distributed feedback（DFB） laser diode,a front facet output power of 30mW is obtained at ...By etching a second-order grating directly into the Al-free optical waveguide region of a ridgewaveguide（RW） AlGaInAs/AlGaAs distributed feedback（DFB） laser diode,a front facet output power of 30mW is obtained at about 820nm with a single longitudinal mode. The Al-free grating surface permits the re-growth of a high-quality cladding layer that yields excellent device performance. The threshold current of these laser diodes is 57mA,and the slope efficiency is about 0.32mW/mA.展开更多
We report a type-I Ga Sb-based laterally coupled distributed-feedback（LC-DFB） laser with shallow-etched gratings operating a continuous wave at room temperature without re-growth process. Second-order Bragg gratings...We report a type-I Ga Sb-based laterally coupled distributed-feedback（LC-DFB） laser with shallow-etched gratings operating a continuous wave at room temperature without re-growth process. Second-order Bragg gratings are fabricated alongside the ridge waveguide by interference lithography. Index-coupled LC-DFB laser with a cavity of 1500 μm achieves single longitudinal mode continuous-wave operation at 20℃ with side mode suppression ratio（SMSR） as high as 24 dB.The maximum single mode continuous-wave output power is about 10 mW at room temperature（uncoated facet）. A low threshold current density of 230 A/cm^2 is achieved with differential quantum efficiency estimated to be 93 mW/A. The laser shows a good wavelength stability against drive current and working temperature.展开更多
We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle ...We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle variation of the target. Due to its ultrahigh sensitivity to the feedback light, PLFI realizes the direct non-contact measurement of non- cooperative targets. Experimental results show that PLFI has an accuracy of 8＂ within a range of 1400＂. The yaw of a guide is also measured and the experimental results agree with those of the dual-frequency laser interferometer Agilent 5529A.展开更多
A new device of two parallel distributed feedback （DFB） lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in...A new device of two parallel distributed feedback （DFB） lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in the Y-branch waveguide coupler through frequency beating of the two laser modes coming from two DFB laser in parallel, which had a small difference in frequency. Continuous rapid tuning of optical microwave signal from 13 to 42 GHz were realized by adjusting independently the driving currents injected into the two DFB lasers.展开更多
Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback （DFB） lasers using varied ridge width with a 4 x 1-multimode-interference （MMI） optical combiner and a semiconductor optical amplifier...Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback （DFB） lasers using varied ridge width with a 4 x 1-multimode-interference （MMI） optical combiner and a semiconductor optical amplifier （SOA） is demon- strated. The average output power and the threshold current are 1.8 mW and 35 mA, respectively, when the injection current of the SOA is 100 mA, with a side mode suppression ratio （SMSR） exceeding 40 dB. The four channels have a 1-nm average channel spacing and can operate separately or simultaneously.展开更多
We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifte...We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.展开更多
Wavelength 1064 nm is one of the most widely used laser wavelengths in industries and science. The high-precision measurement of the refractive index of optical materials at 1064 nm is significant for improving the op...Wavelength 1064 nm is one of the most widely used laser wavelengths in industries and science. The high-precision measurement of the refractive index of optical materials at 1064 nm is significant for improving the optical design. We study the direct measurement of refractive index at 1064nm of lasers, including cMcium fluoride （CaF2）, fused silica and zinc selenide （ZnSe）, whose refractive indices cover a large range from 1.42847 to 2.48272. The measurement system is built based on the quasi-common-path Nd：YAG laser feedback interferometry. The thickness can be measured simultaneously with the refractive index. The results demonstrate that the system has absolute uncertainties of ~10-5 and ~10-4 mm in refractive index and thickness measurement, respectively.展开更多
Usually GaAs/AlGaAs is utilized as an active layer material in laser diodes operating in the spectral range of 800- 850 nm. In this work, in addition to a traditional unstrained GaAs/AlGaAs distributed feedback （DFB...Usually GaAs/AlGaAs is utilized as an active layer material in laser diodes operating in the spectral range of 800- 850 nm. In this work, in addition to a traditional unstrained GaAs/AlGaAs distributed feedback （DFB） laser diode, a compressively strained InGaAlAs/AlGaAs DFB laser diode is numerically investigated in characteristic. The simulation results show that the compressively strained DFB laser diode has a lower transparency carrier density, higher gain, lower Auger recombination rate, and higher stimulated recombination rate, which lead to better a device performance, than the traditional unstrained GaAs/AlGaAs DFB laser diode.展开更多
Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modu...Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modulation.In integrated EML,the microwave interaction between the distributed feedback laser diode(DFB-LD)and the electro-absorption modulator(EAM)has a nonnegligible influence on the modulation performance,especially at the high-frequency region.In this paper,integrated EML was investigated as a three-port network with two electrical inputs and a single optical output,where the scattering matrix of the integrated device was theoretically deduced and experimentally measured.Based on the theoretical model and the measured data,the microwave equivalent circuit model of the integrated device was established,from which the microwave interaction between DFB-LD and EAM was successfully extracted.The results reveal that the microwave interaction within integrated EML contains both the electrical isolation and optical coupling.The electrical isolation is bidirectional while the optical coupling is directional,which aggravates the microwave interaction in the direction from DFB-LD to EAM.展开更多
Laser action in methyl methacrylate （MMA） co-doped with sulforhodamine B and crystal violet dyes was investi- gated. The dye mixture was incorporated into a solid polymeric matrix and was pumped by a 532-nm Nd：YAG ...Laser action in methyl methacrylate （MMA） co-doped with sulforhodamine B and crystal violet dyes was investi- gated. The dye mixture was incorporated into a solid polymeric matrix and was pumped by a 532-nm Nd：YAG laser. Distributed feedback dye laser （DFDL） action was induced in the dye mixture using a prism arrangement both in the donor and acceptor regions by an energy transfer mechanism. Theoretically, the characteristics of acceptor and donor DFDLs, and the dependence of their pulse widths and output powers on acceptor-donor concentrations and pump power, were studied. Experimentally, the output energy of DFDL was measured at the emission peaks of donor and acceptor dyes for different pump powers and different acceptor-donor concentrations. Tuning of the output wavelength was achieved by varying the period of the gain modulation of the laser medium. The laser wavelength showed continuous tunability from 563 nm to 648 nm.展开更多
基金Supported by the National High-Technology Research and Development Program of China under Grant Nos 2011AA010303and 2012AA012203the National Basic Research Program of China under Grant No 2011CB301702the National Natural Science Foundation of China under Grant Nos 61321063 and 6132010601
文摘A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.
基金supported by the National Key R&D Program of China (No.2020YFB2205804)the National Natural Science Foundation of China (Nos.62374092 and 62371470)the Key Research and Development Program of Jiangsu Province(No.BE2023083)。
文摘A high-speed distributed feedback laser based on the reconstruction equivalent chirp technology has been proposed and demonstrated. Due to the enhanced detuned loading and the photon–photon resonance effect, the 3-dB modulation bandwidth is improved to 29 GHz. Utilizing the proposed method, the relative intensity noise is reduced to below-156.37 dB/Hz,and the frequency chirp is decreased from 4.74 to 2.58. Moreover, the modulation maintains excellent linearity, with a 1-dB compression point of more than 18 d Bm.
基金supported by the Scientific Research Project of Beijing Municipal Education Commission (No.KM202411232020)the Young Backbone Teacher Support Plan (No.YBT202408)the Scientific Researchof Beijing Information Science and Technology University (No.2023XJJ08)。
文摘Quantum cascade lasers(QCLs) have broad application potentials in infrared countermeasure system,free-space optical communication and trace gas detection.Compared with traditional Fabry-Pérot(FP) cavity and external cavity,distributed feedback quantum cascade lasers(DFB-QCLs) can obtain narrower laser linewidth and higher integration.In this paper,the structure design,numerical simulation and optimization of the Bragg grating of DFB-QCLs are carried out to obtain the transmission spectrum with central wavelength at 4.6 μm.We analyze the relationship among the structure parameters,the central wavelength shift and transmission efficiency using coupled-wave theory and finite-difference time-domain(FDTD) method.It is shown that the increase in the number of grating periods enhances the capabilities of mode selectivity,while the grating length of a single period adjustment directly determines the Bragg wavelength.Additionally,variations in etching depth and duty cycle lead to blue and red shifts in the central wavelength,respectively.Based on the numerical simulation results,the optimized design parameters for the upper buffer layer and the upper cladding grating are proposed,which gives an optional scheme for component fabrication and performance improvement in the future.
基金supported by the National "863" Project of China(No.2012AA012203)the National "973" Program of China(No.2011CB301702)
文摘High-strained InGaAs/InGaAsP multiple quantum wells （MQWs） distributed feedback （DFB） lasers, fab- ricated using metal organic chemical vapor deposition, are presented at 1,82 μm with a high side-mode- suppression ratio of 49.53 dB. The current- and temperature-tuning rates of the DFB mode wavelength are 0.01 nm/mA and 0.13 nm/℃, respectively. A characteristic temperature of 51 K is also confirmed. The DFB laser demonstrates good performance and can be apt）lied to H2O concentration sensing.
文摘We experimentally demonstrated that the distributed feedback(DFB) lasers with the active distributed reflector achieved a 25.8 Gb/s operation over a wide temperature range of -40 to 85℃. The DFB lasers can achieve additional feedback from an active distributed reflector with accurately controlled phase, and single-mode yields are not related to the position of cleave. The threshold currents of the fabricated laser are 6 mA and 20 mA at -40℃ and 85℃, respectively. The side mode suppression ratio of the fabricated laser is above 50 dB at all temperatures. Transmissions of 25.8 Gb/s after 10 km single-mode fibers with clear eye openings and less than 0.8 dB power penalty over a wide temperature range have been demonstrated as well.
基金Project supported by the National High Technology Research and Development Program of China (Grant No 842010)the Fund of Shanghai Optics Science and Technology, China (Grant No 05DZ2007)
文摘By employing a simple model of describing three-level lasers, we have theoretically investigated the effect of photon lifetime on the output dynamics of Er-doped distributed feedback fibre lasers. And based on the theoretical analysis we have proposed a promising method to suppress self-pulsing behaviour in the fibre lasers.
基金supported by the National Key Research and Development Program of China(No.2021YFB2800500).
文摘We report the InAs/GaAs quantum dot laterally coupled distributed feedback(LC-DFB)lasers operating at room temperature in the wavelength range of 1.31μm.First-order chromium Bragg gratings were fabricated alongside the ridge waveguide to obtain the maximum coupling coefficient with the optical field.Stable continuous-wave single-frequency operation has been achieved with output power above 5 mW/facet and side mode suppression ratio exceeding 52 dB.Moreover,a single chip integrating three LC-DFB lasers was tentatively explored.The three LC-DFB lasers on the chip can operate in single mode at room temperature,covering the wavelength span of 35.6 nm.
文摘Monolithic electro absorption modulated distributed feedback(DFB) lasers are proposed and fabricated by using a modified double stack active layer.The 38mA threshold,9dB extinction ratio (from 0 5V to 3 0V),and about 5mW output power at the 100mA operation current are achieved.Compared with other reported results (only 1 5mW at the same operation current) of the traditional stack active structure,the proposed structure improves the output power of devices.
基金Project supported by the National Science Fund for Distinguished Young Scholars of China (Grant No. 60525406)the National Natural Science Foundation of China (Grant Nos. 60736031,60806018,and 60906026)+1 种基金the National Basic Research Program of China (Grant No. 2006CB604903)the National High Technology Research and Development Program of China (Grant Nos. 2007AA03Z446 and 2009AA03Z403)
文摘A 7.8-μm surface emitting second-order distributed feedback quantum cascade laser （DFB QCL） structure with metallized surface grating is studied. The modal property of this structure is described by utilizing coupled-mode theory where the coupling coefficients are derived from exact Floquet-Bloch solutions of infinite periodic structure. Based on this theory, the influence of waveguide structure and grating topography as well as device length on the laser performance is numerically investigated. The optimized surface emitting second-order DFB QCL structure design exhibits a high surface outcoupling efficiency of 22% and a low threshold gain of 10 cm-1. Using a π phase-shift in the centre of the grating, a high-quality single-lobe far-field radiation pattern is obtained.
基金the National Science and Technology Major Project of China(Grant Nos.2017YFB0503100,2018YFB0504600,2018YFB2200300,and 2020YFB2205902)Frontier Science Key Program of the President of the Chinese Academy of Sciences(Grant No.QYZDY-SSW-JSC006)+3 种基金the National Natural Science Foundation of China(Grant Nos.62090051,62090052,62090054,11874353,61935009,61934003,61904179,61727822,61805236,and 62004194)Science and Technology Development Project of Jilin Province,China(Grant Nos.20200401069GX,20200401062GX,20200501007GX,20200501008GX,and 20200501009GX)Special Scientific Research Project of Academician Innovation Platform in Hainan Province,China(Grant No.YSPTZX202034)Dawn Talent Training Program of CIOMP,and Independent Innovation Project of State Key Laboratory of Luminescence and Applications(Grant No.SKL1-Z-2020-02).
文摘The 795 nm distributed feedback lasers have great application in pumping the Rb D1 transition.In this paper,in order to realize specific 795 nm lasing,we designed tilted ridge distributed feedback lasers based on purely gain coupled effect induced by periodic current injection windows through changing the angle of the tilted ridge.The fabricated devices were cleaved into 2 mm-cavity-length,including 5 tilted angles.The peak output powers of all devices were above 30 mW.Single longitudinal mode lasing was realized in all tilted Fabry-Perot cavities using periodic current injection windows,with side mode suppression ratio over 30 dB.The total wavelength range covered 8.656 nm at 20℃.It was disclosed theoretically and experimentally that the output powers,threshold currents,and central wavelengths of the tilted ridge purely gain coupled DFB lasers were relevant to the tilted angles.The results will be instructive for future design of DFB laser arrays with different central wavelengths.
文摘By etching a second-order grating directly into the Al-free optical waveguide region of a ridgewaveguide（RW） AlGaInAs/AlGaAs distributed feedback（DFB） laser diode,a front facet output power of 30mW is obtained at about 820nm with a single longitudinal mode. The Al-free grating surface permits the re-growth of a high-quality cladding layer that yields excellent device performance. The threshold current of these laser diodes is 57mA,and the slope efficiency is about 0.32mW/mA.
基金Project supported by the National Key Basic Research Program of China(Grant Nos.2014CB643903 and 2013CB932904)the National Special Funds for the Development of Major Research Equipment and Instruments,China(Grant No.2012YQ140005)+1 种基金the National Natural Science Foundation of China(Grant Nos.61435012,61274013,61306088,and 61290303)the Strategic Priority Research Program(B)of the Chinese Academy of Sciences(Grant No.XDB01010200)
文摘We report a type-I Ga Sb-based laterally coupled distributed-feedback（LC-DFB） laser with shallow-etched gratings operating a continuous wave at room temperature without re-growth process. Second-order Bragg gratings are fabricated alongside the ridge waveguide by interference lithography. Index-coupled LC-DFB laser with a cavity of 1500 μm achieves single longitudinal mode continuous-wave operation at 20℃ with side mode suppression ratio（SMSR） as high as 24 dB.The maximum single mode continuous-wave output power is about 10 mW at room temperature（uncoated facet）. A low threshold current density of 230 A/cm^2 is achieved with differential quantum efficiency estimated to be 93 mW/A. The laser shows a good wavelength stability against drive current and working temperature.
基金supported by the National Natural Science Foundation of China(Grant No.61036016)
文摘We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle variation of the target. Due to its ultrahigh sensitivity to the feedback light, PLFI realizes the direct non-contact measurement of non- cooperative targets. Experimental results show that PLFI has an accuracy of 8＂ within a range of 1400＂. The yaw of a guide is also measured and the experimental results agree with those of the dual-frequency laser interferometer Agilent 5529A.
基金Project supported by the National Natural Science Foundation of China （Grant No 90401025）. Acknowledgments The authors are grateful to the Multiple-function 0ptoelectronic Integration group, Institute of Semiconductors, CAS for sponsoring this project. We extend our thanks to Professor Wang Zi-Yu of Peking University for microwave signal testing.
文摘A new device of two parallel distributed feedback （DFB） lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in the Y-branch waveguide coupler through frequency beating of the two laser modes coming from two DFB laser in parallel, which had a small difference in frequency. Continuous rapid tuning of optical microwave signal from 13 to 42 GHz were realized by adjusting independently the driving currents injected into the two DFB lasers.
基金Project supported by the National High Technology Research and Pevelopment Program of China (Grant Nos. 2011AA010303 and 2012AA012203)the National Basic Research Program of China (Grant No. 2011CB301702)the National Natural Science Foundation of China (Grant Nos. 61021003 and 61090392)
文摘Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback （DFB） lasers using varied ridge width with a 4 x 1-multimode-interference （MMI） optical combiner and a semiconductor optical amplifier （SOA） is demon- strated. The average output power and the threshold current are 1.8 mW and 35 mA, respectively, when the injection current of the SOA is 100 mA, with a side mode suppression ratio （SMSR） exceeding 40 dB. The four channels have a 1-nm average channel spacing and can operate separately or simultaneously.
基金Supported by the National Natural Science Foundation of China under Grant No F050306
文摘We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.
基金Supported by the National Natural Science Foundation of China under Grant No 61036016the Beijing Higher Education Young Elite Teacher Project under Grant No YETP0086
文摘Wavelength 1064 nm is one of the most widely used laser wavelengths in industries and science. The high-precision measurement of the refractive index of optical materials at 1064 nm is significant for improving the optical design. We study the direct measurement of refractive index at 1064nm of lasers, including cMcium fluoride （CaF2）, fused silica and zinc selenide （ZnSe）, whose refractive indices cover a large range from 1.42847 to 2.48272. The measurement system is built based on the quasi-common-path Nd：YAG laser feedback interferometry. The thickness can be measured simultaneously with the refractive index. The results demonstrate that the system has absolute uncertainties of ~10-5 and ~10-4 mm in refractive index and thickness measurement, respectively.
基金Project supported by the National Natural Science Foundation of China （Grant No 10374085）. Acknowledgment The authors would like to thank the members of the nano-opotoelectronics laboratory for helpful discussion.
文摘Usually GaAs/AlGaAs is utilized as an active layer material in laser diodes operating in the spectral range of 800- 850 nm. In this work, in addition to a traditional unstrained GaAs/AlGaAs distributed feedback （DFB） laser diode, a compressively strained InGaAlAs/AlGaAs DFB laser diode is numerically investigated in characteristic. The simulation results show that the compressively strained DFB laser diode has a lower transparency carrier density, higher gain, lower Auger recombination rate, and higher stimulated recombination rate, which lead to better a device performance, than the traditional unstrained GaAs/AlGaAs DFB laser diode.
基金This work was supported by the National Key Research and Development Program of China under Grant No.2018YFE0201900the National Natural Science Foundation of China under Grants No.61927821 and No.61875240the Joint Research Fund of Ministry of Education of China under Grant No.6141A02022436.
文摘Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modulation.In integrated EML,the microwave interaction between the distributed feedback laser diode(DFB-LD)and the electro-absorption modulator(EAM)has a nonnegligible influence on the modulation performance,especially at the high-frequency region.In this paper,integrated EML was investigated as a three-port network with two electrical inputs and a single optical output,where the scattering matrix of the integrated device was theoretically deduced and experimentally measured.Based on the theoretical model and the measured data,the microwave equivalent circuit model of the integrated device was established,from which the microwave interaction between DFB-LD and EAM was successfully extracted.The results reveal that the microwave interaction within integrated EML contains both the electrical isolation and optical coupling.The electrical isolation is bidirectional while the optical coupling is directional,which aggravates the microwave interaction in the direction from DFB-LD to EAM.
文摘Laser action in methyl methacrylate （MMA） co-doped with sulforhodamine B and crystal violet dyes was investi- gated. The dye mixture was incorporated into a solid polymeric matrix and was pumped by a 532-nm Nd：YAG laser. Distributed feedback dye laser （DFDL） action was induced in the dye mixture using a prism arrangement both in the donor and acceptor regions by an energy transfer mechanism. Theoretically, the characteristics of acceptor and donor DFDLs, and the dependence of their pulse widths and output powers on acceptor-donor concentrations and pump power, were studied. Experimentally, the output energy of DFDL was measured at the emission peaks of donor and acceptor dyes for different pump powers and different acceptor-donor concentrations. Tuning of the output wavelength was achieved by varying the period of the gain modulation of the laser medium. The laser wavelength showed continuous tunability from 563 nm to 648 nm.
