Smoke is the main cause of fire death. In order to minimize the potential danger of smoke hazard, a rational VR based fire training simulator should fully consider all aspects of smoke hazard. In the simulator, the vi...Smoke is the main cause of fire death. In order to minimize the potential danger of smoke hazard, a rational VR based fire training simulator should fully consider all aspects of smoke hazard. In the simulator, the visualization of data based on FDS (Fire Dynamics Simulator) and FED fire dynamic data and volume rendering is further optimized, which can be effectively and quickly applied to virtual fire protection. In addition, a comprehensive smoke hazard assessment model based on FED and FED is established to assess the IHD value of different paths, which represents the safety of different paths, and can be used for evacuation or rescue in virtual training. Taking the case of campus fire drill as an experiment, the research shows the accuracy and effectiveness of smoke assessment based on FDS and FED model. The road force with the highest safety can be selected through the comprehensive model. So the assessment model is proved to be valuable.展开更多
This paper is aimed at examining the applicability of methods for resilience, reliability and risk analyses of rain-fed agricultural systems from modeled continuous soil moisture availability in rain-fed crop lands. T...This paper is aimed at examining the applicability of methods for resilience, reliability and risk analyses of rain-fed agricultural systems from modeled continuous soil moisture availability in rain-fed crop lands. The methodology involves integration of soil and climatic data in a simple soil moisture accounting model to assess soil moisture availability, and a risk used as indicator of sustainability of rain-fed agricultural systems. It is also attempted to demonstrate the role of soil moisture modeling in risk analysis and agricultural water management in a semi-arid region in Limpopo Basin where rain-fed agriculture is practiced. For this purpose, a daily-time step soil moisture accounting model is employed to simulate daily soil moisture, evaporation, surface runoff, and deep percolation using 40 years (1961-2000) of agroclimatic data, and cropping cycle data of maize, sorghum and sunflower. Using a sustainability criterion on crop water requirement and soil moisture availability, we determined resilience, risk and reliability as a quantitative measure of sustainability of rain-fed agriculture of these three crops. These soil moisture simulations and the sustainability criteria revealed further confirmation of the relative sensitivity to drought of these crops. Generally it is found that the risk of failure is relatively low for sorghum and relatively high for maize and sunflower in the two sites with some differences of severity of failure owing to the slightly different agroclimatic settings.展开更多
针对串馈功率分配器传统设计中场景适配效率低、手动建模耗时长的问题,提出基于图形用户界面(Graphic User Interface,GUI)与Python-HFSS的串馈式微带功率分配器自动设计方法。通过GUI输入中心频率、功率比等核心参数,结合逐级功率叠加...针对串馈功率分配器传统设计中场景适配效率低、手动建模耗时长的问题,提出基于图形用户界面(Graphic User Interface,GUI)与Python-HFSS的串馈式微带功率分配器自动设计方法。通过GUI输入中心频率、功率比等核心参数,结合逐级功率叠加-阻抗迭代匹配逻辑计算微带线参数,进而调用HFSS脚本完成自动建模与仿真。以1.45GHz六级功率分配器为实例验证,结果显示参数计算耗时约0.01s,3D建模耗时约9.80s,全流程效率显著优于传统方法;且输出端口功率精度与相位一致性均满足工程要求,可有效解决传统设计痛点,适用于天线阵列等场景,具备工程应用价值。展开更多
As a typical clean and renewable energy, wind power is becoming more and more widely used in electrical industry. However, its characteristics of random and intermittent have brought serious problems to the power syst...As a typical clean and renewable energy, wind power is becoming more and more widely used in electrical industry. However, its characteristics of random and intermittent have brought serious problems to the power system, such as voltage fluctuation and insufficient reactive power. Based on the K-means clustering algorithm, this paper classifies the doubly-fed induction generators （DFIG） according to the operation of propeller pitch angle control. At the same time, to obtain the optimal parameter, advanced particle swarm optimization （PSO） is used. Then the dynamic model of DFIG under the network fault condition is built. What is more, the role that crowbar circuit plays in low voltage ride through （LVRT） is discussed. Finally, simulations in DigSILENT verify the model.展开更多
This paper studies the problem of diagnosis strategy for a doubly fed induction motor (DFIM) sensor faults. This strategy is based on unknown input proportional integral (PI) multiobserver. Thecontribution of this pap...This paper studies the problem of diagnosis strategy for a doubly fed induction motor (DFIM) sensor faults. This strategy is based on unknown input proportional integral (PI) multiobserver. Thecontribution of this paper is on one hand the creation of a new DFIM model based on multi-model approach and, on the other hand, the synthesis of an adaptive PI multi-observer. The DFIM Volt per Hertz drive system behaves as a nonlinear complex system. It consists of a DFIM powered through a controlled PWM Voltage Source Inverter (VSI). The need of a sensorless drive requires soft sensors such as estimators or observers. In particular, an adaptive Proportional-Integral multi-observer is synthesized in order to estimate the DFIM’s outputs which are affected by different faults and to generate the different residual signals symptoms of sensor fault occurrence. The convergence of the estimation error is guaranteed by using the Lyapunov’s based theory. The proposed diagnosis approach is experimentally validated on a 1 kW Induction motor. Obtained simulation results confirm that the adaptive PI multiobserver consent to accomplish the detection, isolation and fault identification tasks with high dynamic performances.展开更多
文摘Smoke is the main cause of fire death. In order to minimize the potential danger of smoke hazard, a rational VR based fire training simulator should fully consider all aspects of smoke hazard. In the simulator, the visualization of data based on FDS (Fire Dynamics Simulator) and FED fire dynamic data and volume rendering is further optimized, which can be effectively and quickly applied to virtual fire protection. In addition, a comprehensive smoke hazard assessment model based on FED and FED is established to assess the IHD value of different paths, which represents the safety of different paths, and can be used for evacuation or rescue in virtual training. Taking the case of campus fire drill as an experiment, the research shows the accuracy and effectiveness of smoke assessment based on FDS and FED model. The road force with the highest safety can be selected through the comprehensive model. So the assessment model is proved to be valuable.
文摘This paper is aimed at examining the applicability of methods for resilience, reliability and risk analyses of rain-fed agricultural systems from modeled continuous soil moisture availability in rain-fed crop lands. The methodology involves integration of soil and climatic data in a simple soil moisture accounting model to assess soil moisture availability, and a risk used as indicator of sustainability of rain-fed agricultural systems. It is also attempted to demonstrate the role of soil moisture modeling in risk analysis and agricultural water management in a semi-arid region in Limpopo Basin where rain-fed agriculture is practiced. For this purpose, a daily-time step soil moisture accounting model is employed to simulate daily soil moisture, evaporation, surface runoff, and deep percolation using 40 years (1961-2000) of agroclimatic data, and cropping cycle data of maize, sorghum and sunflower. Using a sustainability criterion on crop water requirement and soil moisture availability, we determined resilience, risk and reliability as a quantitative measure of sustainability of rain-fed agriculture of these three crops. These soil moisture simulations and the sustainability criteria revealed further confirmation of the relative sensitivity to drought of these crops. Generally it is found that the risk of failure is relatively low for sorghum and relatively high for maize and sunflower in the two sites with some differences of severity of failure owing to the slightly different agroclimatic settings.
文摘针对串馈功率分配器传统设计中场景适配效率低、手动建模耗时长的问题,提出基于图形用户界面(Graphic User Interface,GUI)与Python-HFSS的串馈式微带功率分配器自动设计方法。通过GUI输入中心频率、功率比等核心参数,结合逐级功率叠加-阻抗迭代匹配逻辑计算微带线参数,进而调用HFSS脚本完成自动建模与仿真。以1.45GHz六级功率分配器为实例验证,结果显示参数计算耗时约0.01s,3D建模耗时约9.80s,全流程效率显著优于传统方法;且输出端口功率精度与相位一致性均满足工程要求,可有效解决传统设计痛点,适用于天线阵列等场景,具备工程应用价值。
基金supported by National Natural Science Foundation of China(61533013,61273144)Scientific Technology Research and Development Plan Project of Tangshan(13130298B)Scientific Technology Research and Development Plan Project of Hebei(z2014070)
文摘As a typical clean and renewable energy, wind power is becoming more and more widely used in electrical industry. However, its characteristics of random and intermittent have brought serious problems to the power system, such as voltage fluctuation and insufficient reactive power. Based on the K-means clustering algorithm, this paper classifies the doubly-fed induction generators （DFIG） according to the operation of propeller pitch angle control. At the same time, to obtain the optimal parameter, advanced particle swarm optimization （PSO） is used. Then the dynamic model of DFIG under the network fault condition is built. What is more, the role that crowbar circuit plays in low voltage ride through （LVRT） is discussed. Finally, simulations in DigSILENT verify the model.
文摘This paper studies the problem of diagnosis strategy for a doubly fed induction motor (DFIM) sensor faults. This strategy is based on unknown input proportional integral (PI) multiobserver. Thecontribution of this paper is on one hand the creation of a new DFIM model based on multi-model approach and, on the other hand, the synthesis of an adaptive PI multi-observer. The DFIM Volt per Hertz drive system behaves as a nonlinear complex system. It consists of a DFIM powered through a controlled PWM Voltage Source Inverter (VSI). The need of a sensorless drive requires soft sensors such as estimators or observers. In particular, an adaptive Proportional-Integral multi-observer is synthesized in order to estimate the DFIM’s outputs which are affected by different faults and to generate the different residual signals symptoms of sensor fault occurrence. The convergence of the estimation error is guaranteed by using the Lyapunov’s based theory. The proposed diagnosis approach is experimentally validated on a 1 kW Induction motor. Obtained simulation results confirm that the adaptive PI multiobserver consent to accomplish the detection, isolation and fault identification tasks with high dynamic performances.
