期刊文献+
共找到546篇文章
< 1 2 28 >
每页显示 20 50 100
Preparation of MnO2-impregnated carbon-coated Fe3O4 nanocomposites and their application for bovine serum albumin adsorption 被引量:2
1
作者 Chol-Hwan Kim Ze-Fei Zhang +1 位作者 Lin-Shan Wang Ting Sun 《Rare Metals》 SCIE EI CAS CSCD 2020年第10期1151-1158,共8页
MnO2-impregnated carbon-coated Fe3 O4(Fe3O4/C/MnO2)nanocomposites with a good core-shell structure were prepared by direct oxidation of carbon-coated Fe3 O4(Fe3O4/C)microspheres with KMnO4 in alkaline solution and app... MnO2-impregnated carbon-coated Fe3 O4(Fe3O4/C/MnO2)nanocomposites with a good core-shell structure were prepared by direct oxidation of carbon-coated Fe3 O4(Fe3O4/C)microspheres with KMnO4 in alkaline solution and applied to adsorb bovine serum albumin(BSA).X-ray diffraction(XRD),transmission electron microscope(TEM),Fourier transform infrared spectrometer(FTIR),vibrating sample magnetometer(VSM)and thermogravimetric analyzer(TGA)tests show that Fe3O4/C microspheres were newly functionalized via the oxidation by KMnO4.Fe3O4/C/MnO2 nanocomposites exhibit a higher adsorption capacity for BSA than Fe3O4/C microspheres and the maximum adsorption of BSA on them occurs at pH 4.7,which is the isoelectric point of BSA.Langmuir isotherm model describes the adsorption of BSA better than Freundlich model and Temkin model,and the kinetics data fit well with the pseudo-second-order model. 展开更多
关键词 fe3o4/C/mno2 nanocomposites Bovine serum albumin Adsorption
原文传递
壳-核结构Fe_3O_4/MnO_2磁性吸附剂的制备、表征及铅吸附去除研究 被引量:30
2
作者 张晓蕾 陈静 +1 位作者 韩京龙 张高生 《环境科学学报》 CAS CSCD 北大核心 2013年第10期2730-2736,共7页
采用共沉淀法制备了具有壳-核结构的磁性吸附剂Fe3O4/MnO2,对其性质进行了系统表征,并对其铅吸附行为进行了初步研究.透射电镜(TEM)结果表明,Fe3O4/MnO2为大小不规则的纳米级细小颗粒.X-射线衍射仪(XRD)表征结果表明,Fe3O4/MnO2具有尖... 采用共沉淀法制备了具有壳-核结构的磁性吸附剂Fe3O4/MnO2,对其性质进行了系统表征,并对其铅吸附行为进行了初步研究.透射电镜(TEM)结果表明,Fe3O4/MnO2为大小不规则的纳米级细小颗粒.X-射线衍射仪(XRD)表征结果表明,Fe3O4/MnO2具有尖晶石的结构.振动样品磁强计(VSM)测得比饱和磁化强度为54.7 A·m2·kg-1,吸附剂磁性较强,易于磁分离;BET比表面积为76.5 m2·g-1.吸附试验结果表明,Fe3O4/MnO2对铅具有良好的去除效果(特别是在低平衡浓度情况下),最大吸附量为142.0 mg·g-1(pH=5.0);Langmuir等温线能更好地拟合Fe3O4/MnO2对溶液中铅的吸附(R2=0.852);吸附速率较快,在初始30 min内可达到平衡吸附量的80%,准二级动力学模型(R2=0.959)能较好地描述吸附过程;溶液pH对Fe3O4/MnO2吸附铅的影响较为明显,随pH升高,吸附量增大,但离子强度变化对吸附影响不大. 展开更多
关键词 壳-核结构 fe3o4 mno2 磁性吸附剂 吸附
原文传递
Fe_3O_4/MnO_2复合纳米材料对水中刚果红吸附性能研究 被引量:7
3
作者 谢建新 吴云英 +2 位作者 陈文静 李娟 周芬艺 《贵州师范大学学报(自然科学版)》 CAS 2017年第6期89-92,共4页
通过水热法制备Fe_3O_4/MnO_2复合纳米材料,并研究其对阴离子染料刚果红的吸附性能。考察了溶液初始pH、吸附剂用量、吸附时间和温度等因素对刚果红吸附的影响,在最优条件下测定Fe_3O_4/MnO_2复合纳米材料对刚果红的最大吸附量为103.1 m... 通过水热法制备Fe_3O_4/MnO_2复合纳米材料,并研究其对阴离子染料刚果红的吸附性能。考察了溶液初始pH、吸附剂用量、吸附时间和温度等因素对刚果红吸附的影响,在最优条件下测定Fe_3O_4/MnO_2复合纳米材料对刚果红的最大吸附量为103.1 mg/g,吸附等温线符合Langmuir吸附模式。结果表明,Fe_3O_4/MnO_2复合纳米材料可望作为一种高效吸附去除染料废水中刚果红的吸附材料。 展开更多
关键词 fe3o4/mno2复合纳米材料 染料废水 刚果红 吸附
在线阅读 下载PDF
Fe_3O_4/MnO_2磁性复合颗粒的制备及表征 被引量:3
4
作者 张姝 王树林 李生娟 《机械工程材料》 CAS CSCD 北大核心 2009年第5期41-44,共4页
以纳米Fe3O4颗粒为核,分别采用液相沉积法和溶胶-凝胶法两种方法将MnO2包覆在其上制备了Fe3O4/MnO2磁性复合颗粒,并借助XRD、TEM、FTIR和VSM等手段分别对纳米Fe3O4颗粒和两种复合颗粒进行表征。结果表明:采用液相沉积法进行包覆可生成... 以纳米Fe3O4颗粒为核,分别采用液相沉积法和溶胶-凝胶法两种方法将MnO2包覆在其上制备了Fe3O4/MnO2磁性复合颗粒,并借助XRD、TEM、FTIR和VSM等手段分别对纳米Fe3O4颗粒和两种复合颗粒进行表征。结果表明:采用液相沉积法进行包覆可生成以多个纳米Fe3O4颗粒为核、粒径约为200 nm的近球形Fe3O4/MnO2磁性复合颗粒,其饱和磁化强度为24.4 kA.m-1;采用溶胶-凝胶法进行包覆则生成以单个纳米Fe3O4颗粒为核、粒径约为50 nm的磁性复合颗粒,包覆层为絮状MnO2,其饱和磁化强度为16.5 kA.m-1。 展开更多
关键词 纳米fe3o4 液相沉积法 溶胶-凝胶法 fe3o4/mno2复合颗粒
在线阅读 下载PDF
Enhanced dechlorination of 2,4-dichlorophenol by recoverable Ni/Fe–Fe_3O_4 nanocomposites 被引量:2
5
作者 Cancan Xu Rui Liu +1 位作者 Lvjun Chen Jialu Tang 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2016年第10期92-101,共10页
Ni/Fe-Fe3O4 nanocomposites were synthesized for dechlorination of 2,4-dichlorophenol (2,4-DCP). The effects of the Ni content in Ni/Fe-Fe3O4 nanocomposites, solution pH, and common dissolved ions on the dechlorinati... Ni/Fe-Fe3O4 nanocomposites were synthesized for dechlorination of 2,4-dichlorophenol (2,4-DCP). The effects of the Ni content in Ni/Fe-Fe3O4 nanocomposites, solution pH, and common dissolved ions on the dechlorination efficiency were investigated, in addition to the reusability of the nanocomposites. The results showed that increasing content of Ni in Ni/Fe-FesO4 nanocomposites, from 1 to 5 wt.%, greatly increased the dechlorination efficiency; the Ni/Fe-Fe3O4 nanocomposites had much higher dechlorination efficiency than bare Ni/Fe nanoparticles. Ni content of S wt.% and initial pH below 6.0 was found to be the optimal conditions for the catalytic dechlorination of 2,4-DCP. Both 2,4-DCP and the intermediate product 2-chlorophenol (2-CP) were completely removed, and the concentra- tion of the final product phenol was close to the theoretical phenol production from complete dechlorination of 20 mg/L of 2,4-DCP, after 3 hr reaction at initial pH value of 6.0, 3 g/L Ni/Fe-Fe3O4, S wt.% Ni content in the composite, and temperature of 22℃ 2,4-DCP dechlorination was enhanced by C1- and inhibited by NO3- and SO42-. The nanocomposites were easily separated from the solution by an applied magnetic field. When the catalyst was reused, the removal efficiency of 2,4-DCP was almost 100% for the first seven uses, and gradually decreased to 75% in cycles 8-10. Therefore, the Ni/Fe-Fe3O4 nanocomposites can be considered as a potentially effective tool for remediation of Pollution bv 2.4-DCP. 展开更多
关键词 Ni/fe-fe3o4 nanocomposites2 4-DichlorophenolCatalytic dechlorinationRecoverableCommon dissolved ions
原文传递
CaCl_2-NaCl熔盐电解MnO_2-Fe_2O_3制备FeMn_4合金粉末 被引量:2
6
作者 高筠 毛磊 王岭 《粉末冶金工业》 CAS 北大核心 2009年第4期6-10,共5页
提出了以MnO2-Fe2O3为原料经一步熔盐电解得到FeMn4粉末工艺,具有工艺流程短、低能耗、无环境污染等特点。采用850℃的NaCl-CaCl2混合熔盐体系,以烧结后的MnO2-Fe2O3片作为阴极,高密度石墨碳棒作阳极,在一定槽电压下进行电解。记录电解... 提出了以MnO2-Fe2O3为原料经一步熔盐电解得到FeMn4粉末工艺,具有工艺流程短、低能耗、无环境污染等特点。采用850℃的NaCl-CaCl2混合熔盐体系,以烧结后的MnO2-Fe2O3片作为阴极,高密度石墨碳棒作阳极,在一定槽电压下进行电解。记录电解过程中电流变化,利用X射线衍射仪分析电解产物的成分,扫描电子显微镜观察电解产物形貌,激光粒度分析仪测定粉末的粒度。研究了不同的烧结温度、电解电压、电解时间、粒度对电脱氧反应的影响。结果表明,采用熔盐电解固体MnO2-Fe2O3直接制备出高纯度的立方体晶格FeMn4粉末(平均粒径D50为16.95μm),其适宜工艺条件为:球磨3 h(平均粒径D50为6.454μm),成形压力20 MPa,烧结温度800℃,烧结时间5 h,3.20 V的槽电压、850℃的CaCl2-NaCl熔盐中电解18 h。 展开更多
关键词 熔盐 电解 feMn4 mno2 fe2o3
在线阅读 下载PDF
Fe3O4-MnO2复合材料催化降解水中有机污染物的研究进展 被引量:4
7
作者 张磊 《化工环保》 CAS CSCD 北大核心 2020年第5期474-479,共6页
综述了Fe3O4-MnO2复合材料催化降解水中有机污染物的研究进展,介绍了Fe3O4-MnO2复合材料的负载方式,总结了Fe3O4-MnO2复合材料在催化降解水中有机污染物方面的应用。同时,阐述了Fe3O4-MnO2复合材料催化降解水中有机污染物的机理。指出:F... 综述了Fe3O4-MnO2复合材料催化降解水中有机污染物的研究进展,介绍了Fe3O4-MnO2复合材料的负载方式,总结了Fe3O4-MnO2复合材料在催化降解水中有机污染物方面的应用。同时,阐述了Fe3O4-MnO2复合材料催化降解水中有机污染物的机理。指出:Fe3O4-MnO2复合材料未来的研发方向是实现负载方式的多样性和提高复合材料的热稳定性,制备出形貌多样、结晶性能好、稳定性高、经济性好、功能多样的Fe3O4-MnO2复合材料。 展开更多
关键词 fe3o4-mno2复合材料 催化降解 有机污染物 机理 应用
在线阅读 下载PDF
纳米MnO_2/Fe_3O_4对镉离子的静态吸附
8
作者 刘占孟 叶鑫 +3 位作者 李静 陈惠民 唐朝春 鲁秀国 《化工环保》 CAS CSCD 北大核心 2016年第3期263-267,共5页
采用水热合成法将Mn O_2包覆于纳米Fe_3O_4的表面,制备出纳米Mn O_2/Fe_3O_4,并将其用于含镉溶液的吸附。考察了吸附效果的影响因素,并研究了纳米Mn O_2/Fe_3O_4的重复使用性能。实验结果表明:在初始镉离子质量浓度为10 mg/L、吸附剂投... 采用水热合成法将Mn O_2包覆于纳米Fe_3O_4的表面,制备出纳米Mn O_2/Fe_3O_4,并将其用于含镉溶液的吸附。考察了吸附效果的影响因素,并研究了纳米Mn O_2/Fe_3O_4的重复使用性能。实验结果表明:在初始镉离子质量浓度为10 mg/L、吸附剂投加量为4 g/L、吸附温度为20℃、溶液p H为6.0、吸附时间为12 h的条件下,镉离子去除率由使用纳米Fe_3O_4时的3%增至使用纳米Mn O_2/Fe_3O_4时的96%;在初始镉离子质量浓度为50 mg/L、纳米Mn O_2/Fe_3O_4投加量为4 g/L、吸附温度为20℃、溶液p H为6.0、吸附时间为1 h的条件下,镉离子去除率达78%,吸附量为9.7 mg/g;经5次重复使用后,纳米Mn O_2/Fe_3O_4对镉离子的去除率仅比首次使用时降低了10百分点,具有良好的重复使用性能。 展开更多
关键词 重金属 纳米复合材料 纳米mno2/fe3o4 镉离子 吸附 NANo mno2/fe3o4
在线阅读 下载PDF
新型Fe_3O_4@α-MnO_2活化过一硫酸盐降解水中偶氮染料 被引量:25
9
作者 董正玉 吴丽颖 +3 位作者 王霁 黄湾 张倩 洪俊明 《中国环境科学》 EI CAS CSSCI CSCD 北大核心 2018年第8期3003-3010,共8页
采用两步水热法制备了新型磁性纳米Fe_3O_4@α-MnO_2复合材料作为催化剂,用于活化过一硫酸盐(PMS)产生强氧化性的硫酸根自由基(SO4-·)氧化降解偶氮染料活性黑5(RBK5).采用透射电子显微镜(TEM),X射线粉末衍射仪(XRD)和振动样品磁强... 采用两步水热法制备了新型磁性纳米Fe_3O_4@α-MnO_2复合材料作为催化剂,用于活化过一硫酸盐(PMS)产生强氧化性的硫酸根自由基(SO4-·)氧化降解偶氮染料活性黑5(RBK5).采用透射电子显微镜(TEM),X射线粉末衍射仪(XRD)和振动样品磁强计(VSM)对制备的催化剂进行表征,证明成功合成了纳米α-MnO_2包覆Fe_3O_4形态的Fe_3O_4@α-MnO_2催化剂,催化剂的饱和磁化强度为39.89emu/g.Fe_3O_4@α-MnO_2催化剂活化PMS与单一的Fe_3O_4和α-MnO_2活化PMS相比,具有更高的催化效率,说明铁锰双金属存在协同作用.同时研究了催化剂的投加量、PMS的浓度和初始pH值等各种因素对RBK5的降解效率以及反应动力学的影响.实验结果表明,Fe_3O_4@α-MnO_2催化剂活化PMS降解RBK5的过程符合准一级反应动力学,在催化剂投加量为1.2g/L,PMS的浓度为4mmol/L,初始pH值为7.0,反应时间为60min的情况下,浓度为30mg/L的RBK5的降解效率可达到91%,此时RBK5的降解速率常数也达到最高值0.023min^(-1).此外,通过加入自由基淬灭剂甲醇、叔丁醇和硝基苯判断了Fe_3O_4@α-MnO_2/PMS体系中起主要氧化降解作用的活性物种为SO4-·. 展开更多
关键词 fe3o4@α-mno2 过一硫酸盐 活性黑5 硫酸根自由基
在线阅读 下载PDF
MnO2@Fe3O4/石墨烯复合材料对水中Pb(Ⅱ)的吸附 被引量:11
10
作者 龙昊宇 黄彬彬 +1 位作者 翁白莎 王悦 《中国环境科学》 EI CAS CSCD 北大核心 2020年第7期2888-2900,共13页
以氧化石墨烯(GO)为原料制备MnO2@Fe3O4/石墨烯(RGO),考察吸附过程中MnO2@Fe3O4/RGO投加量、溶液pH值、初始浓度和吸附时间等因素对Pb(Ⅱ)的去除率和吸附量的影响,并运用BET比表面积测试法计算MnO2@Fe3O4/RGO的比表面积和平均孔径,采用... 以氧化石墨烯(GO)为原料制备MnO2@Fe3O4/石墨烯(RGO),考察吸附过程中MnO2@Fe3O4/RGO投加量、溶液pH值、初始浓度和吸附时间等因素对Pb(Ⅱ)的去除率和吸附量的影响,并运用BET比表面积测试法计算MnO2@Fe3O4/RGO的比表面积和平均孔径,采用扫描电子显微镜(SEM),振动样品磁强计(VSM),X射线衍射(XRD)和X射线光电子能谱(XPS)等对样品进行表征.结果表明:MnO2@Fe3O4/RGO的比表面积为89.164m^2/g,孔容为0.284cm^3/g;随着pH值在2~10范围内增加,复合材料对Pb(Ⅱ)的去除率先增大后减小,pH=6时达到最大值.通过4种等温吸附模型(Langmuir、Freundlich、Temkin、D-R模型)和4种吸附动力学模型(伪一级动力学、伪二级动力学、Elovich、颗粒内扩散模型)拟合发现,MnO2@Fe3O4/RGO对Pb(Ⅱ)吸附符合伪二级动力学模型.吸附等温线更符合Langmiur模型,属于典型的单分子层吸附,以化学吸附为主,最大吸附量为265.3mg/g. 展开更多
关键词 石墨烯 fe3o4 mno2 Pb(Ⅱ) 吸附
在线阅读 下载PDF
Fe3O4@MnO2复合纳米材料的制备及其对染料刚果红的吸附研究 被引量:2
11
作者 龙星宇 陈柯锦 +1 位作者 谭兴力 李秋华 《化工新型材料》 CAS CSCD 北大核心 2020年第5期255-260,265,共7页
采用熔剂热法制备Fe3O4纳米微球,再通过金属氧化物沉积法,在Fe3O4微球表面沉积MnO2,从而制备Fe3O4@MnO2复合纳米材料,并通过SEM、EDS、FT-IR、XRD等技术手段表征,研究其对刚果红的吸附性能。分别考察了溶液初始pH、吸附剂的用量和吸附... 采用熔剂热法制备Fe3O4纳米微球,再通过金属氧化物沉积法,在Fe3O4微球表面沉积MnO2,从而制备Fe3O4@MnO2复合纳米材料,并通过SEM、EDS、FT-IR、XRD等技术手段表征,研究其对刚果红的吸附性能。分别考察了溶液初始pH、吸附剂的用量和吸附时间等因素对刚果红吸附的影响,并探究最优条件。在优化条件下测定Fe3O4@MnO2复合纳米材料对刚果红的最大吸附量,为27.78mg/g。并通过等温Langmuir吸附和Freundlich等温吸附模型进行拟合。实验结果表明,Fe3O4@MnO2复合纳米材料可以作为吸附染料刚果红的一种新型高效吸附剂材料。 展开更多
关键词 熔剂热法 fe3o4@mno2复合纳米材料 刚果红 吸附
原文传递
磁性花状Fe3O4/C/MnO2/C3N4光催化剂的制备及其性能研究 被引量:2
12
作者 陈燕 姜嘉宾 +5 位作者 杨玉莹 王遵法 刘明庆 杩冬雪 严晓宁 马明亮 《广东化工》 CAS 2020年第23期1-3,共3页
磁性MnO2基复合材料具有优异的光催化性能,本文在空心Fe3O4微球表面包覆C层,通过水热法在微球表面生成花状MnO2,并利用CN前驱体原位包覆和低温聚合法制备得到Fe3O4/C/MnO2/C3N4复合催化剂。磁性内核便于磁分离,导电C层可抑制光生载流子... 磁性MnO2基复合材料具有优异的光催化性能,本文在空心Fe3O4微球表面包覆C层,通过水热法在微球表面生成花状MnO2,并利用CN前驱体原位包覆和低温聚合法制备得到Fe3O4/C/MnO2/C3N4复合催化剂。磁性内核便于磁分离,导电C层可抑制光生载流子的重组,同时构建g-C3N4与MnO2之间的异质结可进一步提高催化性能。利用SEM、TEM进行形貌和结构表征,并对光催化活性的影响因素进行研究。 展开更多
关键词 fe3o4/C/mno2/C3N4 复合催化剂 磁分离剂 催化性能
在线阅读 下载PDF
Synthesis and characterization of magnetic and luminescent Fe_3O_4/CdTe nanocomposites using aspartic acid as linker 被引量:8
13
作者 Xiu Ling Wang Lu Wei +1 位作者 Guan Hong Tao Meng Qiong Huang 《Chinese Chemical Letters》 SCIE CAS CSCD 2011年第2期233-236,共4页
In this study,the preparation of a new kind of magnetic and luminescent Fe3O4/CdTe nanocomposites was demonstrated. Superparamagnetic Fe3O4 nanoparticles were first synthesized by hydrothermal coprecipitation of ferri... In this study,the preparation of a new kind of magnetic and luminescent Fe3O4/CdTe nanocomposites was demonstrated. Superparamagnetic Fe3O4 nanoparticles were first synthesized by hydrothermal coprecipitation of ferric and ferrous ions,followed by the modification of their surfaces with tetramethylammonium hydroxide(TMAOH) and the chemical activation with aspartic acid.The surface-modified Fe3O4 nanoparticles were then covalently coated with CdTe quantum dots(QDs),which were modified with mercaptoacetic acid(MPA),to form the Fe3O4/CdTe magnetic and luminescent nanocomposites through the coordination of the amino groups on the surfaces of Fe3O4 and the carboxyl groups on CdTe QDs.The structure and properties of as-synthesized nanocomposites were characterized.It was indicated that the nanocomposites possessed structure with an average diameter of 40- 50 nm,yellow-green emission feature and room temperature ferro-magnetism.Both the fluorescence and UV-vis absorption spectra of the nanocomposites showed a blue shift comparing with those of CdTe QDs.The mechanism of the blue shift was presented.The nanocomposites retained the ferromagnetic property with a saturation magnetization of 8.9 emu/g. 展开更多
关键词 fe3o4/CdTe nanocomposites LUMINESCENT MAGNETIC Synthesis Aspartic acid
原文传递
Absorption performance of DMSA modified Fe_3O_4@SiO_2 core/shell magnetic nanocomposite for Pb^(2+) removal 被引量:8
14
作者 TIAN Qing-hua WANG Xiao-yang +1 位作者 MAO Fang-fang GUO Xue-yi 《Journal of Central South University》 SCIE EI CAS CSCD 2018年第4期709-718,共10页
The purpose of this study is to explore the adsorption performance of meso-2,3-dimercaptosuccinic acid(DMSA)modified Fe3O4@SiO2 magnetic nanocomposite(Fe3O4@SiO2@DMSA)for Pb2+ions removal from aqueous solutions.The ef... The purpose of this study is to explore the adsorption performance of meso-2,3-dimercaptosuccinic acid(DMSA)modified Fe3O4@SiO2 magnetic nanocomposite(Fe3O4@SiO2@DMSA)for Pb2+ions removal from aqueous solutions.The effects of solution pH,initial concentration of Pb2+ions,contact time,and temperature on the amount of Pb2+adsorbed were investigated.Adsorption isotherms,adsorption kinetics,and thermodynamic analysis were also studied.The results showed that the maximum adsorption capacity of the Fe3O4@SiO2@DMSA composite is 50.5 mg/g at 298 K,which is higher than that of Fe3O4 and Fe3O4@SiO2 magnetic nanoparticles.The adsorption process agreed well with Langmuir adsorption isotherm models and pseudo second-order kinetics.The thermodynamic analysis revealed that the adsorption was spontaneous,endothermic and energetically driven in nature. 展开更多
关键词 lead removal ADSoRPTIoN fe3o4@Sio2 core/shell structure DMSA modification magnetic nanocomposite
在线阅读 下载PDF
Enhanced Fenton,photo-Fenton and peroxidase-like activity and stability over Fe_3O_4/g-C_3N_4 nanocomposites 被引量:11
15
作者 Yanan Liu Anwu Xu 《Chinese Journal of Catalysis》 CSCD 北大核心 2017年第12期2110-2119,共10页
We prepared the Fe3O4/g‐C3N4nanoparticles(NPs)through a simple electrostatic self‐assembly method with a3:97weight ratio to investigate their Fenton,photo‐Fenton and oxidative functionalities besides photocatalytic... We prepared the Fe3O4/g‐C3N4nanoparticles(NPs)through a simple electrostatic self‐assembly method with a3:97weight ratio to investigate their Fenton,photo‐Fenton and oxidative functionalities besides photocatalytic functionality.We observed an improvement of the Fenton and photo‐Fenton activities of the Fe3O4/g‐C3N4nanocomposites.This improvement was attributed to efficient charge transfer between Fe3O4and g‐C3N4at the heterojunctions,inhibition of electron‐hole recombination,a high surface area,and stabilization of Fe3O4against leaching by the hydrophobic g‐C3N4.The obtained NPs showed a higher degradation potential for rhodamine B(RhB)dye than those of Fe3O4and g‐C3N4.As compared to photocatalysis,the efficiency of RhB degradation in the Fenton and photo‐Fenton reactions was increased by20%and90%,respectively.Additionally,the horseradish peroxidase(HRP)activity of the prepared nanomaterials was studied with3,3,5,5‐tetramethylbenzidinedihydrochloride(TMB)as a substrate.Dopamine oxidation was also examined.Results indicate that Fe3O4/g‐C3N4nanocomposites offers more efficient degradation of RhB dye in a photo‐Fenton system compared with regular photocatalytic degradation,which requires a long time.Our study also confirmed that Fe3O4/g‐C3N4nanocomposites can be used as a potential material for mimicking HRP owing to its high affinity for TMB.These findings suggest good potential for applications in biosensing and as a catalyst in oxidation reactions. 展开更多
关键词 fe3o4/g‐C3N4 nanocomposites fenton reaction Dye degradation Peroxidase activity Horseradish peroxidase mimicking Dopamine oxidation
在线阅读 下载PDF
Magnetic Fe_3O_4-Reduced Graphene Oxide Nanocomposites-Based Electrochemical Biosensing 被引量:3
16
作者 Lili Yu Hui Wu +4 位作者 Beina Wu Ziyi Wang Hongmei Cao Congying Fu Nengqin Jia 《Nano-Micro Letters》 SCIE EI CAS 2014年第3期258-267,共10页
An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the mag... An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the magnetism, conductivity and biocompatibility of the Fe3O4-RGO nanosheets, the nanocomposites could be facilely adhered to the electrode surface by magnetically controllable assembling and beneficial to achieve the direct redox reactions and electrocatalytic behaviors of GOx immobilized into the nanocomposites. The biosensor exhibited good electrocatalytic activity, high sensitivity and stability. The current response is linear over glucose concentration ranging from 0.05 to 1.5 m M with a low detection limit of0.15 μM. Meanwhile, validation of the applicability of the biosensor was carried out by determining glucose in serum samples. The proposed protocol is simple, inexpensive and convenient, which shows great potential in biosensing application. 展开更多
关键词 fe3o4-reduced graphene oxide(fe3o4-RGo) nanocomposites Magnetically controllable assembling Direct electron transfer BIoSENSoR
在线阅读 下载PDF
Preparation and Characterization of Superparamagnetic Fe_3O_4/CNTs Nanocomposites Dual-drug Carrier 被引量:2
17
作者 张小娟 郝凌云 +4 位作者 WANG Hehe ZHU Xingqun ZHANG Zhiying HU Xiaohong JIANG Wei 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2017年第1期42-46,共5页
Fe3O4/carbon nanotubes(Fe3O4/CNTs) nanocomposites were prepared by polylol hightemperature decomposition of the precursor ferric chloride and CNTs in liquid triethylene glycol.After surface modification with hexaned... Fe3O4/carbon nanotubes(Fe3O4/CNTs) nanocomposites were prepared by polylol hightemperature decomposition of the precursor ferric chloride and CNTs in liquid triethylene glycol.After surface modification with hexanediamine,folate was covalently linked to the amine group of magnetic Fe3O4/CNTs nanocomposites.The products were characterized by Fourier-transform infrared spectroscopy,transmission electron microscopy,and vibrating sample magnetometry.Then Fe3O4/CNTs were used as a dual-drug carrier to co-delivery of the hydrophilic drug epirubicin hydrochloride and hydrophobic drug paclitaxel.The results indicated that the Fe3O4/CNTs had a favorable release property for epirubicin and paclitaxel,and thus had potential application in tumor-targeted combination chemotherapy. 展开更多
关键词 fe3o4/CNTs nanocomposites dual-drug carrier EPIRUBICIN PACLITAXEL
原文传递
Synthesis of Fe_3O_4-coated silica aerogel nanocomposites 被引量:2
18
作者 Jun Sung LEE Eun Jung LEE Hae Jin HWANG 《中国有色金属学会会刊:英文版》 CSCD 2012年第S3期702-706,共5页
Fe3O4:SiO2 nanocomposite powders were synthesized by a two-step process,which included the precipitation of FeCl2 and FeCl3 and the gelation of silicic acid solution derived from water glass.At first,Fe3O4 nanoparticl... Fe3O4:SiO2 nanocomposite powders were synthesized by a two-step process,which included the precipitation of FeCl2 and FeCl3 and the gelation of silicic acid solution derived from water glass.At first,Fe3O4 nanoparticles having a crystallite size of 20 nm were obtained by controlling the ratio of Fe(II) and Fe(III) precursors.In the second step,Fe3O4 particles were embedded in SiO2 matrix by the hydrolysis and subsequent condensation of the silicic acid solution containing Fe3O4 particles.It was found that the Fe3O4 nanoparticles homogenously disperse in the SiO2 matrix.The Fe3O4:SiO2 nanocomposite exhibited an enhanced thermal stability against oxidation compared with pure Fe3O4.FT-IR analysis indicates the presence of the Si-O-Fe bond in the Fe3O4:SiO2 (1:10,mole fraction) nanocomposite. 展开更多
关键词 nanocompositE fe3o4 SIo2 SoL GEL synthesis
在线阅读 下载PDF
Structures and magnetic properties of nanocomposite CoFe_2O_4-BaTiO_3 fibers by organic gel-thermal decomposition process 被引量:2
19
作者 周智 沈湘黔 +1 位作者 宋福展 闵春英 《Journal of Central South University》 SCIE EI CAS 2010年第6期1172-1176,共5页
The nanocomposite xCoFe2O4-(1-x)BaTiO3(x=0.2,0.3,0.4,0.5,molar fraction) fibers with fine diameters and high aspect ratios(length to diameter ratios) were prepared by the organic gel-thermal decomposition process from... The nanocomposite xCoFe2O4-(1-x)BaTiO3(x=0.2,0.3,0.4,0.5,molar fraction) fibers with fine diameters and high aspect ratios(length to diameter ratios) were prepared by the organic gel-thermal decomposition process from citric acid and metal salts.The structures and morphologies of gel precursors and fibers derived from thermal decomposition of the gel precursors were characterized by Fourier transform infrared spectroscopy,X-ray diffractometry and scanning electron microscopy.The magnetic properties of the nanocomposite fibers were measured by vibrating sample magnetometer.The nanocomposite fibers consisting of ferrite(CoFe2O4) and perovskite(BaTiO3) are formed at the calcination temperature of 900 ℃ for 2 h.The average grain sizes of CoFe2O4 and BaTiO3 in the nanocomposite fibers increase from 25 to 65 nm with the calcination temperature from 900 to 1 180 ℃.The single fiber constructed from these nanograins of CoFe2O4 and BaTiO3 has a necklace-like morphology.The saturation magnetization of the nanocomposite 0.4CoFe2O4-0.6BaTiO3 fibers increases with the increase of CoFe2O4 grain size,while the coercivity reaches a maximum value when the average grain size of CoFe2O4 is around the critical single-domain size of 45 nm obtained at 1 000 ℃.The saturation magnetization and remanence of the nanocomposite xCoFe2O4-(1-x)BaTiO3(x=0.2,0.3,0.4,0.5) fibers almost exhibit a linear relationship with the molar fraction of CoFe2O4 in the nanocomposites. 展开更多
关键词 nanocompositE Cefe2o4 BATIo3 fiber organic gel-thermal decomposition process magnetic property
在线阅读 下载PDF
Fe3O4/δ-MnO2纳米片的制备及其对亚甲基蓝的吸附研究 被引量:3
20
作者 王建芳 王君 +3 位作者 杨和平 周春生 舒唐新 徐杰 《无机盐工业》 CAS CSCD 北大核心 2019年第10期93-96,共4页
采用拓扑氧化法制备δ-二氧化锰六边形纳米片,通过共沉淀法控制pH=10,使Fe^2+与Fe^3+发生共沉淀形成四氧化三铁沉积于δ-二氧化锰纳米片表面,形成Fe3O4/δ-MnO2磁性六边形纳米片。研究了铁用量对Fe3O4/δ-MnO2结构和晶相的影响。利用X... 采用拓扑氧化法制备δ-二氧化锰六边形纳米片,通过共沉淀法控制pH=10,使Fe^2+与Fe^3+发生共沉淀形成四氧化三铁沉积于δ-二氧化锰纳米片表面,形成Fe3O4/δ-MnO2磁性六边形纳米片。研究了铁用量对Fe3O4/δ-MnO2结构和晶相的影响。利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)等技术手段对其进行表征分析。研究了Fe3O4/δ-MnO2磁性纳米片对亚甲基蓝溶液的吸附行为,系统分析了吸附剂用量、亚甲基蓝初始浓度和吸附时间对吸附效率的影响。Fe3O4/δ-MnO2六边形纳米片尺寸大小均一,边长约为100nm。该材料对亚甲基蓝表现出良好的吸附性能,当吸附时间为1 h时吸附量约为2.7 mg/g,去除率约为86.3%。 展开更多
关键词 fe3o4/δ-mno2 纳米片 亚甲基蓝 吸附行为
在线阅读 下载PDF
上一页 1 2 28 下一页 到第
使用帮助 返回顶部