Uniform Fe3 C/N-doped carbon nanofibers were successfully synthesized through a facile self-catalyzed CVD method by using acetylene as carbon source and Fe3O4 as iron source and autocatalytic template for the reaction...Uniform Fe3 C/N-doped carbon nanofibers were successfully synthesized through a facile self-catalyzed CVD method by using acetylene as carbon source and Fe3O4 as iron source and autocatalytic template for the reaction under moderate preparation conditions. The experimental and theoretical calculation results demonstrate that Fe3 C can improve the lithium storage performance of carbon nanofibers. Besides, the addition of PPy can not only control the growth rate of carbon fibers but also help to form uniform carbon fibers. As a result, the obtained Fe3 C/N-doped carbon nanofiber composites display favorable electrochemical performance as an anode for lithium-ion batteries, which including satisfactory rate performance of 402 m A h g-1 under 1.2 Ag-1, and good cycling stability of 502.3 m A h g-1 under 200 m Ag-1 over 400 cycles. The introduction of Fe3 C species and the uniform carbon fiber morphology are responsible for the long-cycling and high rate performance of materials.展开更多
Fe-based carbon materials are widely considered promising to replace Pt/C as next-generation electrocatalysts towards oxygen reduction reaction (ORR). However, the preparation of Fe-based carbon materials is still car...Fe-based carbon materials are widely considered promising to replace Pt/C as next-generation electrocatalysts towards oxygen reduction reaction (ORR). However, the preparation of Fe-based carbon materials is still carried out by conventional heating method (CHM). Herein, a novel microwave-assisted carbon bath method (MW-CBM) was proposed, which only took 35 min to synthesize Fe/Fe3C nanoparticles encapsulated in N-doped carbon layers derived from Prussian blue (PB). The catalyst contained large specific surface area and mesoporous structure, abundant Fe-Nx and C–N active sites, unique core-shell structure. Due to the synergistic effects of these features, the as-prepared Fe/Fe3C@NC-2 displayed outstanding ORR activity with onset potential of 0.98 VRHE and halfwave potential of 0.87 VRHE, which were more positive than 20 wt.% Pt/C (0.93 VRHE and 0.82 VRHE). Besides, Fe/Fe3C@NC-2 gave a better stability and methanol tolerance than Pt/C towards ORR in alkaline media, too.展开更多
A new Fe3C-N-doped reduced graphene oxide(Fe3C-N-rGO)prepared by a facile method is used as a separator for high performance lithium-sulfur(Li-S)batteries.The Fe3C-N-rGO is coated on the surface of commercial polyprop...A new Fe3C-N-doped reduced graphene oxide(Fe3C-N-rGO)prepared by a facile method is used as a separator for high performance lithium-sulfur(Li-S)batteries.The Fe3C-N-rGO is coated on the surface of commercial polypropylene separator(Celgard 2400)close to the sulfur cathode.The special nanotubes are in-situ catalyzed by Fe3C nanoparticles.They could entrap lithium polysulfides(Li PSs)to restrain the shuttle effect and reduce the loss of active material.The battery with the modified separator and sulfur cathode shows an excellent cycle performance.It has a high rate performance,580.5 mAh/g at the high current rate of 4 C relative to 1075 mAh/g at 0.1 C.It also has an initial discharge capacity of 774.8 m Ah/g measured at 0.5 C and remains 721.8 mAh/g after 100 cycles with a high capacity retention of 93.2%.The outstanding performances are notable in recently reports with modified separator.展开更多
Non-noble metal(NNM)catalysts have recently attracted intensive interest for their high catalytic performance towards oxygen reduction reaction(ORR)at low cost.Herein,a novel NNM catalyst was synthesized by the simple...Non-noble metal(NNM)catalysts have recently attracted intensive interest for their high catalytic performance towards oxygen reduction reaction(ORR)at low cost.Herein,a novel NNM catalyst was synthesized by the simple pyrolysis of carbon black,urea and a Fe-containing precursor,which exhibits excellent ORR catalytic activity,superior durability and methanol tolerance versus the Pt/C catalyst in both alkaline and acidic solutions.Scanning electron microscopy(SEM),transmission electron microscopy(TEM)and X-ray diffraction(XRD)characterizations demonstrate that the product is a nitrogen-doped hybrid of graphite encapsulated Fe/Fe3C nanoparticles and carbon black.X-ray photoelectron spectrum(XPS)and electrochemical analyses indicate that the catalytic performance and chemical stability correlate closely with a nitrogen-rich layer on the Fe/Fe3C nanoparticle after pyrolysis with presence of urea,leading to the same four-electron pathway towards ORR as the Pt/C catalyst.The hybrid is prospective to be an efficient ORR electrocatalyst for direct methanol fuel cells with high catalytic performance at low cost.展开更多
以静电纺丝技术为基础,组装含有金属有机框架MIL-88的氮掺杂复合纳米纤维。经过高温退火制备氮掺杂的含有Fe3C的碳纳米纤维(N-Fe3C-CNFs)。通过SEM、TEM、XRD、XPS对该材料的微观形态结构进行表征,并以此材料作为锂离子电池的负极材料...以静电纺丝技术为基础,组装含有金属有机框架MIL-88的氮掺杂复合纳米纤维。经过高温退火制备氮掺杂的含有Fe3C的碳纳米纤维(N-Fe3C-CNFs)。通过SEM、TEM、XRD、XPS对该材料的微观形态结构进行表征,并以此材料作为锂离子电池的负极材料对电池的循环性能、倍率性能、CV以及阻抗(EIS)等电化学性能进行研究。结果表明,当电流密度为1 A/g时,此材料循环200圈后仍具有756. 6 m Ah/g的可逆比容量。展开更多
One simple and environmental friendly synthesis strategy for preparing low-cost magnetic Fe3C@C materials has been facilely developed using a modified sol-gel approach,wherein natural magnetite acted as the iron sourc...One simple and environmental friendly synthesis strategy for preparing low-cost magnetic Fe3C@C materials has been facilely developed using a modified sol-gel approach,wherein natural magnetite acted as the iron source.A chelating polycarboxylic acid such as citric acid(CA)was employed as the carbon source,and it dissolved Fe very effectively,Fe3O4 and natural magnetite to composite an iron-citrate complex with the assistance of ammonium hydroxide.The core-shell structure of the as-prepared nanocomposites was formed directly by high-temperature pyrolysis.The Fe3C@C materials exhibited superparamagnetic properties(38.09 emu/mg),suggesting potential applications in biomedicine,environment,absorption,catalysis,etc.展开更多
Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication ...Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication of a bifunctional oxygen electrocatalyst has been proposed.The efficient non-preciousmetal-based electrocatalyst,Fe/Fe_(3)C@Fe-N_(x)-C consists of highly curved onion-like carbon shells that encapsulate Fe/Fe_(3)C nanoparticles,distributed on an extensively porous graphitic carbon aerogel.The obtained Fe/Fe_(3)C@Fe-N_(x)-C aerogel exhibited superb electrochemical activity,excellent durability,and high methanol tolerance.The experimental results indicated that the assembly of onion-like carbon shells with encapsulated Fe/Fe_(3)C yielded highly curved carbon surfaces with abundant Fe-Nxactive sites,a porous structure,and enhanced electrocatalytic activity towards ORR and OER,hence displaying promising potential for application as an air cathode in rechargeable Zn-air batteries.The constructed Zn-air battery possessed an exceptional peak power density of~147 mW cm^(-2),outstanding cycling stability(200 cycles,1 h per cycle),and a small voltage gap of 0.87 V.This study offers valuable insights regarding the construction of low-cost and highly active bifunctional oxygen electrocatalysts for efficient air batteries.展开更多
基金This research is supported by the National Natural Science Foundation of China(Grant Nos.51772092,51972109 and 51804116)the Natural Science Foundation ofHunanProvince,China(Grant No.2019JJ50205)+1 种基金the Scientific Research Foundation of Hunan Provincial Education Department,China(Grant Nos.18A315,18B347 and 18B346)the Hunan Provincial Innovation Foundation for Postgraduate(Grant No.CX2018B773).
文摘Uniform Fe3 C/N-doped carbon nanofibers were successfully synthesized through a facile self-catalyzed CVD method by using acetylene as carbon source and Fe3O4 as iron source and autocatalytic template for the reaction under moderate preparation conditions. The experimental and theoretical calculation results demonstrate that Fe3 C can improve the lithium storage performance of carbon nanofibers. Besides, the addition of PPy can not only control the growth rate of carbon fibers but also help to form uniform carbon fibers. As a result, the obtained Fe3 C/N-doped carbon nanofiber composites display favorable electrochemical performance as an anode for lithium-ion batteries, which including satisfactory rate performance of 402 m A h g-1 under 1.2 Ag-1, and good cycling stability of 502.3 m A h g-1 under 200 m Ag-1 over 400 cycles. The introduction of Fe3 C species and the uniform carbon fiber morphology are responsible for the long-cycling and high rate performance of materials.
基金supported by the National Natural Science Foundation of China (U1303291)the Program for Changjiang Scholars and Innovative Research Team in University (No. IRT_15R46)
文摘Fe-based carbon materials are widely considered promising to replace Pt/C as next-generation electrocatalysts towards oxygen reduction reaction (ORR). However, the preparation of Fe-based carbon materials is still carried out by conventional heating method (CHM). Herein, a novel microwave-assisted carbon bath method (MW-CBM) was proposed, which only took 35 min to synthesize Fe/Fe3C nanoparticles encapsulated in N-doped carbon layers derived from Prussian blue (PB). The catalyst contained large specific surface area and mesoporous structure, abundant Fe-Nx and C–N active sites, unique core-shell structure. Due to the synergistic effects of these features, the as-prepared Fe/Fe3C@NC-2 displayed outstanding ORR activity with onset potential of 0.98 VRHE and halfwave potential of 0.87 VRHE, which were more positive than 20 wt.% Pt/C (0.93 VRHE and 0.82 VRHE). Besides, Fe/Fe3C@NC-2 gave a better stability and methanol tolerance than Pt/C towards ORR in alkaline media, too.
基金supported by the National Natural Science Foundation of China(Grant no.51672075,21271069,51772092,51704106)Science and Technology Program of Hunan Province(Grant no.2015JC3049)
文摘A new Fe3C-N-doped reduced graphene oxide(Fe3C-N-rGO)prepared by a facile method is used as a separator for high performance lithium-sulfur(Li-S)batteries.The Fe3C-N-rGO is coated on the surface of commercial polypropylene separator(Celgard 2400)close to the sulfur cathode.The special nanotubes are in-situ catalyzed by Fe3C nanoparticles.They could entrap lithium polysulfides(Li PSs)to restrain the shuttle effect and reduce the loss of active material.The battery with the modified separator and sulfur cathode shows an excellent cycle performance.It has a high rate performance,580.5 mAh/g at the high current rate of 4 C relative to 1075 mAh/g at 0.1 C.It also has an initial discharge capacity of 774.8 m Ah/g measured at 0.5 C and remains 721.8 mAh/g after 100 cycles with a high capacity retention of 93.2%.The outstanding performances are notable in recently reports with modified separator.
基金supported financially by the National Natural Science Foundation of China (No.51874051)the Natural Science Foundation of Guangxi Province (Nos.2015GXNSFAAI39283 and 2016GXNSFAA380107)
文摘Non-noble metal(NNM)catalysts have recently attracted intensive interest for their high catalytic performance towards oxygen reduction reaction(ORR)at low cost.Herein,a novel NNM catalyst was synthesized by the simple pyrolysis of carbon black,urea and a Fe-containing precursor,which exhibits excellent ORR catalytic activity,superior durability and methanol tolerance versus the Pt/C catalyst in both alkaline and acidic solutions.Scanning electron microscopy(SEM),transmission electron microscopy(TEM)and X-ray diffraction(XRD)characterizations demonstrate that the product is a nitrogen-doped hybrid of graphite encapsulated Fe/Fe3C nanoparticles and carbon black.X-ray photoelectron spectrum(XPS)and electrochemical analyses indicate that the catalytic performance and chemical stability correlate closely with a nitrogen-rich layer on the Fe/Fe3C nanoparticle after pyrolysis with presence of urea,leading to the same four-electron pathway towards ORR as the Pt/C catalyst.The hybrid is prospective to be an efficient ORR electrocatalyst for direct methanol fuel cells with high catalytic performance at low cost.
文摘以静电纺丝技术为基础,组装含有金属有机框架MIL-88的氮掺杂复合纳米纤维。经过高温退火制备氮掺杂的含有Fe3C的碳纳米纤维(N-Fe3C-CNFs)。通过SEM、TEM、XRD、XPS对该材料的微观形态结构进行表征,并以此材料作为锂离子电池的负极材料对电池的循环性能、倍率性能、CV以及阻抗(EIS)等电化学性能进行研究。结果表明,当电流密度为1 A/g时,此材料循环200圈后仍具有756. 6 m Ah/g的可逆比容量。
基金supported by the National Natural Science Foundation of China(No.51876046 and No.51711540032)。
文摘One simple and environmental friendly synthesis strategy for preparing low-cost magnetic Fe3C@C materials has been facilely developed using a modified sol-gel approach,wherein natural magnetite acted as the iron source.A chelating polycarboxylic acid such as citric acid(CA)was employed as the carbon source,and it dissolved Fe very effectively,Fe3O4 and natural magnetite to composite an iron-citrate complex with the assistance of ammonium hydroxide.The core-shell structure of the as-prepared nanocomposites was formed directly by high-temperature pyrolysis.The Fe3C@C materials exhibited superparamagnetic properties(38.09 emu/mg),suggesting potential applications in biomedicine,environment,absorption,catalysis,etc.
基金supported financially by the National Natural Science Foundation of China,China(Grant No.51702180,51572136,91963113,21703116,51372127,51873096)The Scientific and Technical Development Project of Qingdao,China(Grant No.18-2-2-52-jch)+1 种基金The Taishan Scholar Advantage and Characteristic Discipline Team of Eco Chemical Process and TechnologyThe Natural Science Foundation of Hebei Province(B2019204009)。
文摘Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication of a bifunctional oxygen electrocatalyst has been proposed.The efficient non-preciousmetal-based electrocatalyst,Fe/Fe_(3)C@Fe-N_(x)-C consists of highly curved onion-like carbon shells that encapsulate Fe/Fe_(3)C nanoparticles,distributed on an extensively porous graphitic carbon aerogel.The obtained Fe/Fe_(3)C@Fe-N_(x)-C aerogel exhibited superb electrochemical activity,excellent durability,and high methanol tolerance.The experimental results indicated that the assembly of onion-like carbon shells with encapsulated Fe/Fe_(3)C yielded highly curved carbon surfaces with abundant Fe-Nxactive sites,a porous structure,and enhanced electrocatalytic activity towards ORR and OER,hence displaying promising potential for application as an air cathode in rechargeable Zn-air batteries.The constructed Zn-air battery possessed an exceptional peak power density of~147 mW cm^(-2),outstanding cycling stability(200 cycles,1 h per cycle),and a small voltage gap of 0.87 V.This study offers valuable insights regarding the construction of low-cost and highly active bifunctional oxygen electrocatalysts for efficient air batteries.
