The oxidation behavior of Fe-based amorphous ribbons was tested by annealing at 380℃ in air for different time with heat treatment furnace and analyzed by X-ray photoelectron spectroscopy （XPS） and scanning electro...The oxidation behavior of Fe-based amorphous ribbons was tested by annealing at 380℃ in air for different time with heat treatment furnace and analyzed by X-ray photoelectron spectroscopy （XPS） and scanning electron micros- copy （SEM）. The mechanism of oxides formation of the amorphous ribbons was discussed in detail. The results showed that the oxides were mostly B2O3 , SiO2 and Fe2O3 or FeO. With the increase of annealing time and holding temperature, the fraction of the oxides on the ribbon surface increased and the size of the oxides became larger due to the generation of new oxides and the coalescence of small oxides. The oxides have different shapes, such as round, rod and needle-shaped. Experimental results also showed that the oxides nucleated at fish scale, air pocket and impu-rities in priority, and the growth of the oxides was controlled by the diffusion of atoms. With the increase of the distance to the ribbon surface, the oxygen concentration decreased dramatically. Due to the low binding energy of B2O3 and the large diffusion coefficient of B atom, the B elemaent was oxidized firstly compared with other elements. More- over, the oxidation deoths of the B2O3 and SiO2 were larger than that of Fe2O3.展开更多
In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment techni...In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment technique known as ultrasonic vibration rapid processing(UVRP),which enables the formation of high-density strong magnetic α-Fe clusters,thereby enhancing the soft magnetic properties of Fe_(78)Si(13)B_(9) amorphous alloy ribbon.展开更多
The effects of deep cryogenic-cycling treatment(DCT)on the mechanical properties,soft magnetic properties,and atomic scale structure of the Fe_(73.5)Si_(13.5)B_(9)Nb_(3)Cu_(1)amorphous nanocrystalline alloy were inves...The effects of deep cryogenic-cycling treatment(DCT)on the mechanical properties,soft magnetic properties,and atomic scale structure of the Fe_(73.5)Si_(13.5)B_(9)Nb_(3)Cu_(1)amorphous nanocrystalline alloy were investigated.The DCT samples were obtained by subjecting the as-annealed samples to a thermal cycling process between the temperature of the supercooled liquid zone and the temperature of liquid nitrogen.Through flat plate bending testing,hardness measurements,and nanoindentation experiment,it is found that the bending toughness of the DCT samples is improved and the soft magnetic properties are also slightly enhanced.These are attributed to the rejuvenation behavior of the DCT samples,which demonstrate a higher enthalpy of relaxation.Therefore,DCT is an effective method to enhance the bending toughness of Fe-based amorphous nanocrystalline alloys without degrading the soft magnetic properties.展开更多
Recent advancements in electrocatalysis have highlighted the exceptional application value of amorphous electrocatalysts. Withtheir unique atomic configurations, these electrocatalysts exhibit superior catalytic perfo...Recent advancements in electrocatalysis have highlighted the exceptional application value of amorphous electrocatalysts. Withtheir unique atomic configurations, these electrocatalysts exhibit superior catalytic performance compared to that of their crystalline coun-terparts. Transition metal(TM) amorphous ribbon-shaped electrocatalysts have recently emerged as a new frontier in the catalysis field.Dealloying is widely considered a fascinating method for enhancing the electrocatalyst performance. In this review, we comprehensivelyexamine the principles of water electrolysis, discuss the prevalent methods for fabricating ribbon-configured electrocatalysts, and providean overview of amorphous alloys. Furthermore, we discuss binary, ternary, and high-entropy amorphous TM-based electrocatalysts,which satisfy the requirements necessary for effective water electrolysis. We also propose strategies to enhance the activity of amorphousTM-based ribbons, including morphology control, defect engineering, composition optimization, and heterostructure creation in differentelectrolytes. Our focus extends to the latest developments in the design of heterogeneous micro/nanostructures, management of prepara-tion techniques, and synthesis of different compositions. Finally, we address the ongoing challenges and provide a perspective on the fu-ture development of broadly applicable, self-supporting TM ribbon-shaped electrocatalysts.展开更多
Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by detonation gun spraying process. Microstructural studies show that the coatings present a densely layered structure typical of the...Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by detonation gun spraying process. Microstructural studies show that the coatings present a densely layered structure typical of thermally sprayed deposits with the porosity below 2%. Both crystallization and oxidation occurred obviously during spraying process, so that the amorphous fraction of the coatings decreased to 54% compared with fully amorphous alloy ribbons of the same component. Corrosion behavior of the amorphous coatings was investigated by electrochemical measurement. The results show that the coatings exhibit extremely wide passive region and low passive current density in 3.5% NaCl (mass fraction) and 1 mol/L HCl solutions, which illustrates excellent ability to resist localized corrosion.展开更多
In this study,a few Fe-based amorphous matrix composite coatings reinforced with various portions(4,8 and16 vol.%) of 31 6L stainless steel powders have been successfully produced through high velocity oxy-fuel(HVOF) ...In this study,a few Fe-based amorphous matrix composite coatings reinforced with various portions(4,8 and16 vol.%) of 31 6L stainless steel powders have been successfully produced through high velocity oxy-fuel(HVOF) spraying.The microstructure of the composite coatings was systematically characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The main structure of composite coatings remained amorphous while 31 6L stainless steel splats were distributed homogeneously in the amorphous matrix and well connected with surrounding amorphous phase.Bonding strength of coatings to the substrate was determined by 'pull-off' tensile tests.The results revealed that the31 6L stainless steel phase effectively improved the bonding strength of amorphous coatings,which is mainly contributed by the strong metallurgical bonding between stainless steel and amorphous splats.The addition of31 6L stainless steel also enhanced the ductility and fracture resistance of the coatings due to the ductile stainless steel phases,which can arrest crack propagation and increase energy dissipation.展开更多
Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by means of atmospheric plasma spraying(APS)process under different conditions.The microstructure and frictional behavior were charac...Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by means of atmospheric plasma spraying(APS)process under different conditions.The microstructure and frictional behavior were characterized simultaneously in this article.The results show that the as-deposited coatings consist of amorphous matrix and some precipitated nanocrystals,while the amorphous fraction and particle deformation as well as crystallization mechanism are significantly sensitive to the spraying parameters.The amorphous coatings express high microhardness and excellent wear resistance under dry frictional wear condition,which attributes to the inherent characteristic of amorphous phase and the dispersion strengthening of precipitated nanocrystals.The dominant wear mechanism of the amorphous coatings is fatigue wear accompanying with oxidative wear.In addition,the microhardness and wear resistance of the amorphous coatings were improved by optimizing spraying parameters,owing to the effect of both structural character and proper proportional of amorphous and nanocrystals fraction.展开更多
Gas atomization is now an important production technique for Fe-based amorphous alloy powders used in additive manufacturing,particularly selective laser melting,fabricating large-sized Fe-based bulk metallic glasses....Gas atomization is now an important production technique for Fe-based amorphous alloy powders used in additive manufacturing,particularly selective laser melting,fabricating large-sized Fe-based bulk metallic glasses.Using the realizable k-εmodel and discrete phase model theory,the flow dynamics of the gas phase and gas-melt two-phase flow felds in the close-wake condition were investigated to establish the correlation between high gas pressure and powder particle characteristics.The locations of the recirculation zones and the shapes of Mach disks were analyzed in detail for the type of discrete-jet closed-coupled gas atomization nozzle.In the gas-phase flow feld,the vortexes,closed to the Mach disk,are found to be a new deceleration method.In the two-phase flow feld,the shape of Mach disk changes from“S”-shape to“Z”-shape under the impact of the droplet flow.As predicted by the wave model,with the elevation of gas pressure,the size of the particle is found to gradually decrease and its distribution becomes more concentrated.Simulation results were compliant with the Fe-based amorphous alloy powder preparation tests.This study deepens the understanding of the gas pressure impacting particle features via gas atomization,and contributes to technological applications.展开更多
Designing low melting point and low basicity refining slag suitable for Fe-based amorphous alloys and understanding the inclusions’formation,removal,influencing mechanisms are quite vital in the fields of metallurgy ...Designing low melting point and low basicity refining slag suitable for Fe-based amorphous alloys and understanding the inclusions’formation,removal,influencing mechanisms are quite vital in the fields of metallurgy and materials.In this study,a novel 13%SiO_(2)-32%CaO-30%Al_(2)O_(3)-25%B_(2)O_(3)(wt.%)refining slag was designed after careful calculations of the liquid phase region,slag-metal equilibrium,surface tension,viscosity,deoxidation capability and sulfur distribution ratio.After refining with our designed slag,the content of impurities and the number density of inclusions in a representative Fe_(83)Si_(2)B_(15)(at.%)amor-phous alloy were significantly reduced.Moreover,the glass-forming ability(GFA)of the alloy was also enhanced,enabling the preparation of amorphous ribbons with a lower cooling rate.Based on the impu-rities in Fe-based amorphous alloys as well as the calculated oxide and sulfide free energy diagrams,CaO,SiO_(2),Al_(2)O_(3) oxides and CaS,TiS,MnS sulfides will form in the master alloy.The high melting point in-clusions in the melt are generally removed via a floatation-separation-absorption process and the Mn,Ti,S impurities are removed via slag-metal interface reactions during refining.As for the detrimental effect of inclusions on glass formation,the small lattice disregistry between Ti,Mn-containing inclusions and primaryα-Fe gains reveal that these inclusions are effective in promoting the heterogeneous nucleation,and therefore greatly deteriorate the GFA.These findings are important and provide an ideal solution to purifying the Fe-based amorphous alloys by refining and enhancing the GFA for industrial production.展开更多
The Fe_(949.7)Cr_(18)Mn_(1.9)Mo_(7.4)W_(1.6)B_(15.2)C_(3.8)Si_(2) amorphous coating was deposited on T91 steel substrate by using the high-velocity oxygen fuel(HVOF)spray technique to enhance the corrosion resistance ...The Fe_(949.7)Cr_(18)Mn_(1.9)Mo_(7.4)W_(1.6)B_(15.2)C_(3.8)Si_(2) amorphous coating was deposited on T91 steel substrate by using the high-velocity oxygen fuel(HVOF)spray technique to enhance the corrosion resistance of T91 stainless steel in liquid lead-bismuth eutectic(LBE).The corrosion behavior of the T91 steel and coating exposed to oxygen-saturated LBE at 400℃ for 500 h was investigated.Results showed that the T91 substrate was severely corroded and covered by a homogeneously distributed dual-layer oxide on the interface contacted to LBE,consisting of an outer magnetite layer and an inner Fe-Cr spinel layer.Meanwhile,the amorphous coating with a high glass transition temperature(Tg=550℃)and crystallization temperature(T_(x)=600℃)exhibited dramatically enhanced thermal stability and corrosion resistance.No visible LBE penetration was observed,although small amounts of Fe_(3)O_(4),Cr_(2)O_(3),and PbO were found on the coating surface.In addition,the amorphicity and interface bonding of the coating layer remained unchanged after the LBE corrosion.The Fe-based amorphous coating can act as a stable barrier layer in liquid LBE and have great application potential for long-term service in LBE-cooled fast reactors.展开更多
Fe-based powder with a composition of Fe_（42.87）Cr_（15.98）Mo_（16.33）C_（15.94）B_（8.88）（at.%）was used to fabricate coatings by high-velocity oxygen fuel spraying.The effects of the spraying parameters on the...Fe-based powder with a composition of Fe_（42.87）Cr_（15.98）Mo_（16.33）C_（15.94）B_（8.88）（at.%）was used to fabricate coatings by high-velocity oxygen fuel spraying.The effects of the spraying parameters on the microstructure and the wear properties of the Fe-based alloy coatings were systematically studied.The results showed that the obtained Fe-based coatings with a thickness of about 400μm consisted of a large-volume amorphous phase and some nanocrystals.With increasing the fuel and oxygen flow rates,the porosity of the obtained coatings decreased.The coating deposited under optimized parameters exhibited the lowest porosity of 2.8%.The excellent wear resistance of this coating was attributed to the properties of the amorphous matrix and the presence of nanocrystals homogeneously distributed within the matrix.The wear mechanism of the coatings was discussed on the basis of observations of the worn surfaces.展开更多
Amorphous alloys without crystalline defects(dislocation,crystal boundary)are ideal hydrophobic coating materials due to their low surface energy.This work used a synergistic method of detonation spraying and surface ...Amorphous alloys without crystalline defects(dislocation,crystal boundary)are ideal hydrophobic coating materials due to their low surface energy.This work used a synergistic method of detonation spraying and surface modification to obtain the superhydrophobic Febased amorphous coatings with high hardness and dense structure on the Q 235 substrate.The results showed that the water contact angles(WCA)of the superhydrophobic coating was 160°±3.6°,and water droplets could bounce off the superhydrophobic coating surface,illustrating the excellent self-cleaning performance of coating.Notably,the corrosion current density(i_(corr))of the superhydrophobic coating further decreased by 2 orders of magnitude down to8.008×10^(-8)A·cm^(-2)compared to the as-deposited coating with 5.473×10^(-6)A·cm^(-2);the corrosion potential(E_(corr))of the superhydrophobic coating shifted by 34 mV to the positive side compared with that of the as-deposited coating(-310 mV).Likewise,the impedance modulus|Z|values of the superhydrophobic coating increased by nearly2 orders of magnitude up to 1×10^(5.6)compared to the asdeposited coating with 1×10^(3.8).Even through lasting immersion in NaCl for 10 days,|Z|values of the superhydrophobic coating were still much higher than those of the as-deposited coating.The superhydrophobic Fe-based amorphous coatings could respond to their applications under extreme conditions due to their excellent hydrophobicity and self-cleaning properties,illustrating their promising future in aerospace,automotive,and machinery industries.展开更多
A new Fe-based amorphous–crystalline composite without non-metallic elements, Fe_(55)Cr_(15)Mo_(15)Ni_(10)W_(5), was prepared by melt-spinning. The formation ability and structure information were investigated by X-r...A new Fe-based amorphous–crystalline composite without non-metallic elements, Fe_(55)Cr_(15)Mo_(15)Ni_(10)W_(5), was prepared by melt-spinning. The formation ability and structure information were investigated by X-ray diffractometer(XRD), energy-dispersive spectrometer(EDS) and scanning electron microscope(SEM). The mechanical properties of the amorphous–crystalline composite were investigated by nanoindentation. A molecular dynamics simulation study was performed to simulate the formation of Fe_(55)Cr_(15)Mo_(15)Ni_(10)W_(5) amorphous alloy. The mechanical properties were obtained by compression simulations simultaneously. The results indicate that the Fe_(55)Cr_(15)Mo_(15)Ni_(10)W_(5) ribbon is an amorphous–crystalline composite structure with good ductility, and the hardness of the amorphous–crystalline composite is about 75%higher than that of master ingot. The simulation mechanical properties are in good agreement with the results of nanoindentation at the nanoscale.展开更多
Hot corrosion behaviors of the 921A alloy and Fe-based amorphous coating induced by KCl-10% ZnCl_(2) and KCl-55% ZnCl_(2) salts at 450℃ in air for 40 h were investigated.Results show that the 921A alloy suffers more ...Hot corrosion behaviors of the 921A alloy and Fe-based amorphous coating induced by KCl-10% ZnCl_(2) and KCl-55% ZnCl_(2) salts at 450℃ in air for 40 h were investigated.Results show that the 921A alloy suffers more serious corrosion damage than the coating and KCl-55% ZnCl_(2) salts are more corrosive than KCl-10% ZnCl_(2) salts.In the two salts,an Fe_(2)O_(3) layer is formed on the 921A alloy surface,while an outer Fe-rich oxide layer and an inner Cr-rich oxide layer are formed on the surface of the coating.Moreover,a certain amount of metal chloride can be found at the oxide/alloy(coating)interface,which can be explained by "active oxidation".However,the corrosion resistance of the Fe-based amorphous coating did not achieve the desired results,probably because the intersplats in the coating serve as corrosion diffusing channels,which facilitate the corrosion damage rate.Nevertheless,the coating is still in amorphous state after hot corrosion exposure.展开更多
Fe-based amorphous alloys with ductility were synthesized using the commercial cast iron QT50(denoted as QT)with the combining minor addition of B and Al by single roller melt-spinning.The melt-spun(QT1-xBx)99Al1(x is...Fe-based amorphous alloys with ductility were synthesized using the commercial cast iron QT50(denoted as QT)with the combining minor addition of B and Al by single roller melt-spinning.The melt-spun(QT1-xBx)99Al1(x is from 0.006wt%to 0.01wt%)amorphous alloys exhibit onset crystallization temperatures and Curie temperatures of 759-780 and 629-642 K respectively,and whi-ch increase with B content.The amorphous ribbons are ductile and can be bent 180°without breaking.With the increase in B content from 0.006wt%to 0.01wt%,the Vickers microhardness of the amorphous alloys increases from Hv 830 to Hv 1110.The effects of the additional B and Al elements on the glass forming ability and mechanical properties were also discussed.展开更多
The effects of kerosene flow rate on the microstructure and wearing properties were investigated for Fe-based amorphous coatings sprayed by High Velocity Oxygen Fuel (HVOF).The microstructures and wearing properties o...The effects of kerosene flow rate on the microstructure and wearing properties were investigated for Fe-based amorphous coatings sprayed by High Velocity Oxygen Fuel (HVOF).The microstructures and wearing properties of the Fe-based amorphous coatings were analyzed with scanning electron microscope (SEM),X-ray diffraction analyzer (XRD),and ball-on-disc tribometer (CFT-1),respectively.The experimental results show that the well interfacial bonding can be observed between the amorphous coating layer and the substrate,and the porosity in amorphous coating layer is less to 1%.Only some crystalline a-Fe and FeO phases can be detected by XRD in the amorphous coatings,while the amorphous content is up to 99.4%.The wearing coefficient is near to 0.15,which is superior to SUS316 of 0.28.As the increasing of wearing loads,the failure mode is changed from oxidation wear to the composite of oxidation and abrasive wear.展开更多
Substituting boron for carbon can improve the corrosion behavior of Fe-based amorphous significantly especially in acid solution with saturated H_2S. XPS analysis proves that boron enriches in the surface layer of amo...Substituting boron for carbon can improve the corrosion behavior of Fe-based amorphous significantly especially in acid solution with saturated H_2S. XPS analysis proves that boron enriches in the surface layer of amorphous and reacts with hydrogen to form B_(10)H_(14) . It efficiently prevents the intrusion of hydrogen to the sample, thus the destructive effect of hydrogen can be decreased greatly.展开更多
Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This...Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This study offered a novel strategy for the direct production of FePC amorphous soft magnetic alloys via smelting reduction of high-phosphorus iron ore(HPIO)and apatite.First,the thermodynamic conditions and equilibrium states of the carbothermal reduction reactions in HPIO were calculated,and the element content in reduced alloys was theoretically determined.The phase and structural evolutions,as well as element migration and enrichment behaviors during the smelting reduction of HPIO and Ca_(3)(PO_(4))_(2),were then experimentally verified.The addition of Ca_(3)(PO_(4))_(2)in HPIO contributes to the enrichment of the P element in reduced alloys and the subsequent development of Fe_(3)P and Fe_(2)P phases.The content of P and C elements in the range of 1.52 wt% -14.63 wt% and 0.62 wt% -2.47 wt%,respectively,can be well tailored by adding 0-50 g Ca_(3)(PO_(4))_(2)and controlling the C/O mole ratio of 0.8-1.1,which is highly consistent with the calculated results.These FePC alloys were then successfully formed into amorphous ribbons and rods.The energy consumption of the proposed strategy was estimated to be 2.00×10^(8) kJ/t,which is reduced by 30% when compared with the conventional production process.These results are critical for the comprehensive utilization of mineral resources and pave the way for the clean production of Fe-based amorphous soft magnetic alloys.展开更多
The addition of early transition metals(ETMs)into Fe-based amorphous alloys is practically found to be effective in reducing theα-Fe grain size in crystallization process.In this paper,by using ab initio molecular dy...The addition of early transition metals(ETMs)into Fe-based amorphous alloys is practically found to be effective in reducing theα-Fe grain size in crystallization process.In this paper,by using ab initio molecular dynamics simulations,the mechanism of the effect of two typical ETMs(Nb and W)on nano-crystallization is studied.It is found that the diffusion ability in amorphous alloy is mainly determined by the bonding energy of the atom rather than the size or weight of the atom.The alloying of B dramatically reduces the diffusion ability of the ETM atoms,which prevents the supply of Fe near the grain surface and consequently suppresses the growth ofα-Fe grains.Moreover,the difference in grain refining effectiveness between Nb and W could be attributed to the larger bonding energy between Nb and B than that between W and B.展开更多
A ferromagnetic amorphous Fe73Al4Ge2Nb1P10C6B4 alloy with high glass-forming ability was synthesized by melt spinning. The supercooled liquid region before crystallization reaches about 65.7 K. The crystallized struct...A ferromagnetic amorphous Fe73Al4Ge2Nb1P10C6B4 alloy with high glass-forming ability was synthesized by melt spinning. The supercooled liquid region before crystallization reaches about 65.7 K. The crystallized structure consists of alpha -Fe, Fe3B, FeB, Fe3P and Fe3C phases. The Fe-based amorphous alloy exhibits good magnetic properties with a high saturation magnetization and a low saturated magnetostriction. The crystallization leads to an obvious decrease in the soft magnetic properties.展开更多
基金Item Sponsored by National Natural Science Foundation of China(51374080)
文摘The oxidation behavior of Fe-based amorphous ribbons was tested by annealing at 380℃ in air for different time with heat treatment furnace and analyzed by X-ray photoelectron spectroscopy （XPS） and scanning electron micros- copy （SEM）. The mechanism of oxides formation of the amorphous ribbons was discussed in detail. The results showed that the oxides were mostly B2O3 , SiO2 and Fe2O3 or FeO. With the increase of annealing time and holding temperature, the fraction of the oxides on the ribbon surface increased and the size of the oxides became larger due to the generation of new oxides and the coalescence of small oxides. The oxides have different shapes, such as round, rod and needle-shaped. Experimental results also showed that the oxides nucleated at fish scale, air pocket and impu-rities in priority, and the growth of the oxides was controlled by the diffusion of atoms. With the increase of the distance to the ribbon surface, the oxygen concentration decreased dramatically. Due to the low binding energy of B2O3 and the large diffusion coefficient of B atom, the B elemaent was oxidized firstly compared with other elements. More- over, the oxidation deoths of the B2O3 and SiO2 were larger than that of Fe2O3.
基金supported by the Major Science and Technology Project of Zhongshan City(No.2022AJ004)the Key Basic and Applied Research Program of Guangdong Province(Nos.2019B030302010 and 2022B1515120082)Guangdong Science and Technology Innovation Project(No.2021TX06C111).
文摘In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment technique known as ultrasonic vibration rapid processing(UVRP),which enables the formation of high-density strong magnetic α-Fe clusters,thereby enhancing the soft magnetic properties of Fe_(78)Si(13)B_(9) amorphous alloy ribbon.
基金supported by Liaoning Joint Fund of NSFC(No.U1908219)。
文摘The effects of deep cryogenic-cycling treatment(DCT)on the mechanical properties,soft magnetic properties,and atomic scale structure of the Fe_(73.5)Si_(13.5)B_(9)Nb_(3)Cu_(1)amorphous nanocrystalline alloy were investigated.The DCT samples were obtained by subjecting the as-annealed samples to a thermal cycling process between the temperature of the supercooled liquid zone and the temperature of liquid nitrogen.Through flat plate bending testing,hardness measurements,and nanoindentation experiment,it is found that the bending toughness of the DCT samples is improved and the soft magnetic properties are also slightly enhanced.These are attributed to the rejuvenation behavior of the DCT samples,which demonstrate a higher enthalpy of relaxation.Therefore,DCT is an effective method to enhance the bending toughness of Fe-based amorphous nanocrystalline alloys without degrading the soft magnetic properties.
基金financially supported by the Yancheng Polytechnic College School-Level Scientific Research, China (No. ygy1903)the National Natural Science Foundation of China (Nos. 52001163, 52075237, and 52371157)+2 种基金the Open Project of Taihu Laboratory of Deep-Sea Technology Science, Key Research and Development Plan of Jiangsu Province, China (No. BE2019119)supported by the Priority Academic Program Development of Jiangsu Higher Education Institution (PAPD), Chinathe research funding for the Jiangsu Specially-Appointed Professor Program, China。
文摘Recent advancements in electrocatalysis have highlighted the exceptional application value of amorphous electrocatalysts. Withtheir unique atomic configurations, these electrocatalysts exhibit superior catalytic performance compared to that of their crystalline coun-terparts. Transition metal(TM) amorphous ribbon-shaped electrocatalysts have recently emerged as a new frontier in the catalysis field.Dealloying is widely considered a fascinating method for enhancing the electrocatalyst performance. In this review, we comprehensivelyexamine the principles of water electrolysis, discuss the prevalent methods for fabricating ribbon-configured electrocatalysts, and providean overview of amorphous alloys. Furthermore, we discuss binary, ternary, and high-entropy amorphous TM-based electrocatalysts,which satisfy the requirements necessary for effective water electrolysis. We also propose strategies to enhance the activity of amorphousTM-based ribbons, including morphology control, defect engineering, composition optimization, and heterostructure creation in differentelectrolytes. Our focus extends to the latest developments in the design of heterogeneous micro/nanostructures, management of prepara-tion techniques, and synthesis of different compositions. Finally, we address the ongoing challenges and provide a perspective on the fu-ture development of broadly applicable, self-supporting TM ribbon-shaped electrocatalysts.
文摘Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by detonation gun spraying process. Microstructural studies show that the coatings present a densely layered structure typical of thermally sprayed deposits with the porosity below 2%. Both crystallization and oxidation occurred obviously during spraying process, so that the amorphous fraction of the coatings decreased to 54% compared with fully amorphous alloy ribbons of the same component. Corrosion behavior of the amorphous coatings was investigated by electrochemical measurement. The results show that the coatings exhibit extremely wide passive region and low passive current density in 3.5% NaCl (mass fraction) and 1 mol/L HCl solutions, which illustrates excellent ability to resist localized corrosion.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 51271081 and 51301072)partially supported by the Key Fundamental Research Project from Shenzhen Research Council (No. JC201105170745A)
文摘In this study,a few Fe-based amorphous matrix composite coatings reinforced with various portions(4,8 and16 vol.%) of 31 6L stainless steel powders have been successfully produced through high velocity oxy-fuel(HVOF) spraying.The microstructure of the composite coatings was systematically characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The main structure of composite coatings remained amorphous while 31 6L stainless steel splats were distributed homogeneously in the amorphous matrix and well connected with surrounding amorphous phase.Bonding strength of coatings to the substrate was determined by 'pull-off' tensile tests.The results revealed that the31 6L stainless steel phase effectively improved the bonding strength of amorphous coatings,which is mainly contributed by the strong metallurgical bonding between stainless steel and amorphous splats.The addition of31 6L stainless steel also enhanced the ductility and fracture resistance of the coatings due to the ductile stainless steel phases,which can arrest crack propagation and increase energy dissipation.
基金Beijing Municipal Education Commission(00900054R5004)
文摘Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by means of atmospheric plasma spraying(APS)process under different conditions.The microstructure and frictional behavior were characterized simultaneously in this article.The results show that the as-deposited coatings consist of amorphous matrix and some precipitated nanocrystals,while the amorphous fraction and particle deformation as well as crystallization mechanism are significantly sensitive to the spraying parameters.The amorphous coatings express high microhardness and excellent wear resistance under dry frictional wear condition,which attributes to the inherent characteristic of amorphous phase and the dispersion strengthening of precipitated nanocrystals.The dominant wear mechanism of the amorphous coatings is fatigue wear accompanying with oxidative wear.In addition,the microhardness and wear resistance of the amorphous coatings were improved by optimizing spraying parameters,owing to the effect of both structural character and proper proportional of amorphous and nanocrystals fraction.
基金supported by the National Key Research and Development Program of China(No.2016YFB1100204)the Key Research&Development Plan of Jiangxi Province(No.20192ACB80001)the National Natural Science Foundation of China(Nos.52171163,51701214 and U1908219)。
文摘Gas atomization is now an important production technique for Fe-based amorphous alloy powders used in additive manufacturing,particularly selective laser melting,fabricating large-sized Fe-based bulk metallic glasses.Using the realizable k-εmodel and discrete phase model theory,the flow dynamics of the gas phase and gas-melt two-phase flow felds in the close-wake condition were investigated to establish the correlation between high gas pressure and powder particle characteristics.The locations of the recirculation zones and the shapes of Mach disks were analyzed in detail for the type of discrete-jet closed-coupled gas atomization nozzle.In the gas-phase flow feld,the vortexes,closed to the Mach disk,are found to be a new deceleration method.In the two-phase flow feld,the shape of Mach disk changes from“S”-shape to“Z”-shape under the impact of the droplet flow.As predicted by the wave model,with the elevation of gas pressure,the size of the particle is found to gradually decrease and its distribution becomes more concentrated.Simulation results were compliant with the Fe-based amorphous alloy powder preparation tests.This study deepens the understanding of the gas pressure impacting particle features via gas atomization,and contributes to technological applications.
基金supported by the National Natural Science Foun-dation of China (No.52174217)China Postdoctoral Science Foundation (No.2020M682495).
文摘Designing low melting point and low basicity refining slag suitable for Fe-based amorphous alloys and understanding the inclusions’formation,removal,influencing mechanisms are quite vital in the fields of metallurgy and materials.In this study,a novel 13%SiO_(2)-32%CaO-30%Al_(2)O_(3)-25%B_(2)O_(3)(wt.%)refining slag was designed after careful calculations of the liquid phase region,slag-metal equilibrium,surface tension,viscosity,deoxidation capability and sulfur distribution ratio.After refining with our designed slag,the content of impurities and the number density of inclusions in a representative Fe_(83)Si_(2)B_(15)(at.%)amor-phous alloy were significantly reduced.Moreover,the glass-forming ability(GFA)of the alloy was also enhanced,enabling the preparation of amorphous ribbons with a lower cooling rate.Based on the impu-rities in Fe-based amorphous alloys as well as the calculated oxide and sulfide free energy diagrams,CaO,SiO_(2),Al_(2)O_(3) oxides and CaS,TiS,MnS sulfides will form in the master alloy.The high melting point in-clusions in the melt are generally removed via a floatation-separation-absorption process and the Mn,Ti,S impurities are removed via slag-metal interface reactions during refining.As for the detrimental effect of inclusions on glass formation,the small lattice disregistry between Ti,Mn-containing inclusions and primaryα-Fe gains reveal that these inclusions are effective in promoting the heterogeneous nucleation,and therefore greatly deteriorate the GFA.These findings are important and provide an ideal solution to purifying the Fe-based amorphous alloys by refining and enhancing the GFA for industrial production.
基金financially supported by the National Natural Science Foundation of China (Nos. 52061135207, 51871016, 51921001, 5197011039, 5197011018, and U20b200318)the China Nuclear Power Technology Research Institute Co., Ltd
文摘The Fe_(949.7)Cr_(18)Mn_(1.9)Mo_(7.4)W_(1.6)B_(15.2)C_(3.8)Si_(2) amorphous coating was deposited on T91 steel substrate by using the high-velocity oxygen fuel(HVOF)spray technique to enhance the corrosion resistance of T91 stainless steel in liquid lead-bismuth eutectic(LBE).The corrosion behavior of the T91 steel and coating exposed to oxygen-saturated LBE at 400℃ for 500 h was investigated.Results showed that the T91 substrate was severely corroded and covered by a homogeneously distributed dual-layer oxide on the interface contacted to LBE,consisting of an outer magnetite layer and an inner Fe-Cr spinel layer.Meanwhile,the amorphous coating with a high glass transition temperature(Tg=550℃)and crystallization temperature(T_(x)=600℃)exhibited dramatically enhanced thermal stability and corrosion resistance.No visible LBE penetration was observed,although small amounts of Fe_(3)O_(4),Cr_(2)O_(3),and PbO were found on the coating surface.In addition,the amorphicity and interface bonding of the coating layer remained unchanged after the LBE corrosion.The Fe-based amorphous coating can act as a stable barrier layer in liquid LBE and have great application potential for long-term service in LBE-cooled fast reactors.
基金Item Sponsored by National Natural Science Foundation of China(51205001)Key Project of Natural Science of Education Department of Anhui Province of China(KJ2014A023)Scientific Research Starting Foundation of Anhui Polytechnic University of China(2012YQQ006)
文摘Fe-based powder with a composition of Fe_（42.87）Cr_（15.98）Mo_（16.33）C_（15.94）B_（8.88）（at.%）was used to fabricate coatings by high-velocity oxygen fuel spraying.The effects of the spraying parameters on the microstructure and the wear properties of the Fe-based alloy coatings were systematically studied.The results showed that the obtained Fe-based coatings with a thickness of about 400μm consisted of a large-volume amorphous phase and some nanocrystals.With increasing the fuel and oxygen flow rates,the porosity of the obtained coatings decreased.The coating deposited under optimized parameters exhibited the lowest porosity of 2.8%.The excellent wear resistance of this coating was attributed to the properties of the amorphous matrix and the presence of nanocrystals homogeneously distributed within the matrix.The wear mechanism of the coatings was discussed on the basis of observations of the worn surfaces.
基金financially supported by the National Natural Science Foundation of China(Nos.51901092,52075234)the Program of"Science and Technology International Cooperation Demonstrative Base of Metal Surface Engineering along the Silk Road(No.2017D01003)"+3 种基金the"111"project(No.D21032)the Key Research Program of Education Department of Gansu Province(No.GSSYLXM-03)the Natural Science Foundation of Gansu Province(No.20JR5RA431)Hongliu Distinguished Young Talent Support Program of Lanzhou University of Technology,and the Open Fund Project of Hunan Province Key Laboratory of Electromagnetic Equipment Design and Manufacturing,Hunan Institute of Technology(No.DC202001)。
文摘Amorphous alloys without crystalline defects(dislocation,crystal boundary)are ideal hydrophobic coating materials due to their low surface energy.This work used a synergistic method of detonation spraying and surface modification to obtain the superhydrophobic Febased amorphous coatings with high hardness and dense structure on the Q 235 substrate.The results showed that the water contact angles(WCA)of the superhydrophobic coating was 160°±3.6°,and water droplets could bounce off the superhydrophobic coating surface,illustrating the excellent self-cleaning performance of coating.Notably,the corrosion current density(i_(corr))of the superhydrophobic coating further decreased by 2 orders of magnitude down to8.008×10^(-8)A·cm^(-2)compared to the as-deposited coating with 5.473×10^(-6)A·cm^(-2);the corrosion potential(E_(corr))of the superhydrophobic coating shifted by 34 mV to the positive side compared with that of the as-deposited coating(-310 mV).Likewise,the impedance modulus|Z|values of the superhydrophobic coating increased by nearly2 orders of magnitude up to 1×10^(5.6)compared to the asdeposited coating with 1×10^(3.8).Even through lasting immersion in NaCl for 10 days,|Z|values of the superhydrophobic coating were still much higher than those of the as-deposited coating.The superhydrophobic Fe-based amorphous coatings could respond to their applications under extreme conditions due to their excellent hydrophobicity and self-cleaning properties,illustrating their promising future in aerospace,automotive,and machinery industries.
基金financially supported by the National Key Research and Development Program of China(No.2016YFC0801905)。
文摘A new Fe-based amorphous–crystalline composite without non-metallic elements, Fe_(55)Cr_(15)Mo_(15)Ni_(10)W_(5), was prepared by melt-spinning. The formation ability and structure information were investigated by X-ray diffractometer(XRD), energy-dispersive spectrometer(EDS) and scanning electron microscope(SEM). The mechanical properties of the amorphous–crystalline composite were investigated by nanoindentation. A molecular dynamics simulation study was performed to simulate the formation of Fe_(55)Cr_(15)Mo_(15)Ni_(10)W_(5) amorphous alloy. The mechanical properties were obtained by compression simulations simultaneously. The results indicate that the Fe_(55)Cr_(15)Mo_(15)Ni_(10)W_(5) ribbon is an amorphous–crystalline composite structure with good ductility, and the hardness of the amorphous–crystalline composite is about 75%higher than that of master ingot. The simulation mechanical properties are in good agreement with the results of nanoindentation at the nanoscale.
基金supported by GuangDong Basic and Applied Basic Research Foundation(No.2020A1515110128).
文摘Hot corrosion behaviors of the 921A alloy and Fe-based amorphous coating induced by KCl-10% ZnCl_(2) and KCl-55% ZnCl_(2) salts at 450℃ in air for 40 h were investigated.Results show that the 921A alloy suffers more serious corrosion damage than the coating and KCl-55% ZnCl_(2) salts are more corrosive than KCl-10% ZnCl_(2) salts.In the two salts,an Fe_(2)O_(3) layer is formed on the 921A alloy surface,while an outer Fe-rich oxide layer and an inner Cr-rich oxide layer are formed on the surface of the coating.Moreover,a certain amount of metal chloride can be found at the oxide/alloy(coating)interface,which can be explained by "active oxidation".However,the corrosion resistance of the Fe-based amorphous coating did not achieve the desired results,probably because the intersplats in the coating serve as corrosion diffusing channels,which facilitate the corrosion damage rate.Nevertheless,the coating is still in amorphous state after hot corrosion exposure.
基金This work was financially supported by the National Natural Science Foundation of China(No.50225103,50471001 and 50631010).
文摘Fe-based amorphous alloys with ductility were synthesized using the commercial cast iron QT50(denoted as QT)with the combining minor addition of B and Al by single roller melt-spinning.The melt-spun(QT1-xBx)99Al1(x is from 0.006wt%to 0.01wt%)amorphous alloys exhibit onset crystallization temperatures and Curie temperatures of 759-780 and 629-642 K respectively,and whi-ch increase with B content.The amorphous ribbons are ductile and can be bent 180°without breaking.With the increase in B content from 0.006wt%to 0.01wt%,the Vickers microhardness of the amorphous alloys increases from Hv 830 to Hv 1110.The effects of the additional B and Al elements on the glass forming ability and mechanical properties were also discussed.
基金Funded by the National Natural Science Foundation of China(No.51965044)the Basic Pre Research of General Armament Department(No.41423060313)。
文摘The effects of kerosene flow rate on the microstructure and wearing properties were investigated for Fe-based amorphous coatings sprayed by High Velocity Oxygen Fuel (HVOF).The microstructures and wearing properties of the Fe-based amorphous coatings were analyzed with scanning electron microscope (SEM),X-ray diffraction analyzer (XRD),and ball-on-disc tribometer (CFT-1),respectively.The experimental results show that the well interfacial bonding can be observed between the amorphous coating layer and the substrate,and the porosity in amorphous coating layer is less to 1%.Only some crystalline a-Fe and FeO phases can be detected by XRD in the amorphous coatings,while the amorphous content is up to 99.4%.The wearing coefficient is near to 0.15,which is superior to SUS316 of 0.28.As the increasing of wearing loads,the failure mode is changed from oxidation wear to the composite of oxidation and abrasive wear.
文摘Substituting boron for carbon can improve the corrosion behavior of Fe-based amorphous significantly especially in acid solution with saturated H_2S. XPS analysis proves that boron enriches in the surface layer of amorphous and reacts with hydrogen to form B_(10)H_(14) . It efficiently prevents the intrusion of hydrogen to the sample, thus the destructive effect of hydrogen can be decreased greatly.
基金financially supported by the National Natural Science Foundation of China(Nos.52174217 and 52304354)the China Postdoctoral Science Foundation(No.2020M682495)。
文摘Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This study offered a novel strategy for the direct production of FePC amorphous soft magnetic alloys via smelting reduction of high-phosphorus iron ore(HPIO)and apatite.First,the thermodynamic conditions and equilibrium states of the carbothermal reduction reactions in HPIO were calculated,and the element content in reduced alloys was theoretically determined.The phase and structural evolutions,as well as element migration and enrichment behaviors during the smelting reduction of HPIO and Ca_(3)(PO_(4))_(2),were then experimentally verified.The addition of Ca_(3)(PO_(4))_(2)in HPIO contributes to the enrichment of the P element in reduced alloys and the subsequent development of Fe_(3)P and Fe_(2)P phases.The content of P and C elements in the range of 1.52 wt% -14.63 wt% and 0.62 wt% -2.47 wt%,respectively,can be well tailored by adding 0-50 g Ca_(3)(PO_(4))_(2)and controlling the C/O mole ratio of 0.8-1.1,which is highly consistent with the calculated results.These FePC alloys were then successfully formed into amorphous ribbons and rods.The energy consumption of the proposed strategy was estimated to be 2.00×10^(8) kJ/t,which is reduced by 30% when compared with the conventional production process.These results are critical for the comprehensive utilization of mineral resources and pave the way for the clean production of Fe-based amorphous soft magnetic alloys.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFB0300502)the Shenzhen Municipal Fundamental Science and Technology Research Program,China(Grant No.JCYJ20170815162201821)the Fundamental Research Funds for Central Universities,China(Grant No.31020170QD102)
文摘The addition of early transition metals(ETMs)into Fe-based amorphous alloys is practically found to be effective in reducing theα-Fe grain size in crystallization process.In this paper,by using ab initio molecular dynamics simulations,the mechanism of the effect of two typical ETMs(Nb and W)on nano-crystallization is studied.It is found that the diffusion ability in amorphous alloy is mainly determined by the bonding energy of the atom rather than the size or weight of the atom.The alloying of B dramatically reduces the diffusion ability of the ETM atoms,which prevents the supply of Fe near the grain surface and consequently suppresses the growth ofα-Fe grains.Moreover,the difference in grain refining effectiveness between Nb and W could be attributed to the larger bonding energy between Nb and B than that between W and B.
文摘A ferromagnetic amorphous Fe73Al4Ge2Nb1P10C6B4 alloy with high glass-forming ability was synthesized by melt spinning. The supercooled liquid region before crystallization reaches about 65.7 K. The crystallized structure consists of alpha -Fe, Fe3B, FeB, Fe3P and Fe3C phases. The Fe-based amorphous alloy exhibits good magnetic properties with a high saturation magnetization and a low saturated magnetostriction. The crystallization leads to an obvious decrease in the soft magnetic properties.
