为了降低催化剂床层压降,提高Fe-β分子筛催化剂用于N_2O催化分解的能力,通过研究整体式分子筛催化剂制备方法,优化出最优原料配比为ω(拟薄水铝石)=40%,ω(硝酸)=8%,水粉比为0.6 m L·g^(-1)。研究了成型过程对分子筛催化剂结构及...为了降低催化剂床层压降,提高Fe-β分子筛催化剂用于N_2O催化分解的能力,通过研究整体式分子筛催化剂制备方法,优化出最优原料配比为ω(拟薄水铝石)=40%,ω(硝酸)=8%,水粉比为0.6 m L·g^(-1)。研究了成型过程对分子筛催化剂结构及性能的影响,并在不同孔密度分子筛催化剂、N_2O浓度和空速条件下考察N_2O分解反应性能。结果表明,在相同温度、空速和N_2O浓度下,分子筛催化剂的孔密度越高,催化活性呈增强趋势;对于相同孔密度的分子筛催化剂,随着空速的增加,相同温度下的N_2O转化率逐渐下降;对于相同孔密度的分子筛催化剂,在相同反应空速和温度下,随着N_2O浓度的增大,N_2O转化率呈上升趋势。展开更多
Ti-10V-2Fe-3Al alloy with fine-grainedβphases was fabricated by friction stir processing with opti-mized processing parameters.The superplastic behavior of the specimens was investigated by tensile deformation at dif...Ti-10V-2Fe-3Al alloy with fine-grainedβphases was fabricated by friction stir processing with opti-mized processing parameters.The superplastic behavior of the specimens was investigated by tensile deformation at different strain rates and temperatures,and an optimal superplastic elongation of 634%was achieved at 700℃ and 3×10^(-4)/s.An annealing treatment at 650℃ for 60 min showed a mi-crostructure withαprecipitates distributed in theβmatrix in the friction stir specimen.Such pre-heat treatment improves the superplasticity of the specimen,achieving an elongation of up to 807%at 750℃ and 3×10^(-4)/s.The influences of tensile temperatures and strain rates on the microstructural evolution,such as grain size variation,grain morphology,and phase transformations,were discussed.The super-plastic deformation behavior of fine-grained Ti-10V-2Fe-3Al alloy is controlled by grain boundary sliding and accompanied by dynamic phase transformation and recrystallization.展开更多
文摘为了降低催化剂床层压降,提高Fe-β分子筛催化剂用于N_2O催化分解的能力,通过研究整体式分子筛催化剂制备方法,优化出最优原料配比为ω(拟薄水铝石)=40%,ω(硝酸)=8%,水粉比为0.6 m L·g^(-1)。研究了成型过程对分子筛催化剂结构及性能的影响,并在不同孔密度分子筛催化剂、N_2O浓度和空速条件下考察N_2O分解反应性能。结果表明,在相同温度、空速和N_2O浓度下,分子筛催化剂的孔密度越高,催化活性呈增强趋势;对于相同孔密度的分子筛催化剂,随着空速的增加,相同温度下的N_2O转化率逐渐下降;对于相同孔密度的分子筛催化剂,在相同反应空速和温度下,随着N_2O浓度的增大,N_2O转化率呈上升趋势。
基金financially supported by the National Natural Science Foundation of China(No.52105373)the China Scholarship Council(No.202106020094).
文摘Ti-10V-2Fe-3Al alloy with fine-grainedβphases was fabricated by friction stir processing with opti-mized processing parameters.The superplastic behavior of the specimens was investigated by tensile deformation at different strain rates and temperatures,and an optimal superplastic elongation of 634%was achieved at 700℃ and 3×10^(-4)/s.An annealing treatment at 650℃ for 60 min showed a mi-crostructure withαprecipitates distributed in theβmatrix in the friction stir specimen.Such pre-heat treatment improves the superplasticity of the specimen,achieving an elongation of up to 807%at 750℃ and 3×10^(-4)/s.The influences of tensile temperatures and strain rates on the microstructural evolution,such as grain size variation,grain morphology,and phase transformations,were discussed.The super-plastic deformation behavior of fine-grained Ti-10V-2Fe-3Al alloy is controlled by grain boundary sliding and accompanied by dynamic phase transformation and recrystallization.
