采用Co_(3)O_(4)吸附脱除模拟柴油中的喹啉、吡啶或苯胺,考察了最佳吸附温度、吸附时间等条件,同时进行了吸附热力学和动力学研究;基于第一性原理对Co_(3)O_(4)晶胞进行相分析,对3种氮化物进行最高占据分子轨道(HOMO)-最低未占据分子轨...采用Co_(3)O_(4)吸附脱除模拟柴油中的喹啉、吡啶或苯胺,考察了最佳吸附温度、吸附时间等条件,同时进行了吸附热力学和动力学研究;基于第一性原理对Co_(3)O_(4)晶胞进行相分析,对3种氮化物进行最高占据分子轨道(HOMO)-最低未占据分子轨道(LUMO)分析,计算了吸附构型的吸附能和最稳定吸附构型的Mulliken电荷转移与电子密度。结果表明:在15 mL模拟柴油中加入0.6 g Co_(3)O_(4),苯胺、吡啶、喹啉的最佳吸附温度分别为20、20和30℃,最佳吸附时间分别为30、30、40 min,吸附容量由大到小顺序均为苯胺>吡啶>喹啉。热力学与动力学分析表明,喹啉、吡啶、苯胺的吸附均更符合多分子层吸附的Freundlich模型和准二级动力学方程。HOMO-LUMO分析结果表明,Co_(3)O_(4)为电子接受体,3种氮化物为电子给予体,Co_(3)O_(4)对喹啉、吡啶的配位吸附结构最稳定,对苯胺的π络合吸附最稳定。电荷转移计算表明,苯胺、吡啶、喹啉向Co_(3)O_(4)团簇转移的电荷数分别为0.423、0.394、0.368,说明Co_(3)O_(4)吸附3种氮化物的吸附能力大小为苯胺>吡啶>喹啉;电子密度图结果表明,最稳定吸附结构中Co_(3)O_(4)与3种氮化物均形成了化学键。展开更多
In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prep...In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prepared Fe_(3)O_(4)-MoS_(2)was characterized by X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectros-copy,Raman spectroscopy,magnetic hysteresis,and nitrogen adsorption-desorption isotherms.Experimental results indicate that,successful attachment of Fe_(3)O_(4)nanoparticles to MoS_(2)sheets has been achieved.The enhanced surface area of Fe_(3)O_(4)-MoS_(2)induced high rates of adsorption and the adsorbed tetracycline was degraded to 90%after 150 min of visible exposure,which is better than that from pure MoS_(2).The introduction of Fe_(3)O_(4)not only enhances the photo-catalytic performance of Fe_(3)O_(4)-MoS_(2),but also enables its convenient recovery from water by an external magnetic field.Furthermore,both the photocatalytic activity and composite phase of Fe_(3)O_(4)-MoS_(2)were well-retained over cy-cles.Owing to its efficient photocatalytic activity,good stability and magnetic recyclability,the Fe_(3)O_(4)-MoS_(2)nano-composite is considered to be a promising photocatalyst for wastewater treatment.展开更多
The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsor...The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsorption and biological degradation,are often hampered by low efficiency and the risk of secondary pollution.Photocatalysis emerges as a promising sustainable alternative;however,the benchmark material titanium dioxide(TiO_(2))suffers from its intrinsic limitations,notably its wide bandgap energy(≥3.4 eV)restricting its activity to the region of the ultraviolet light and its rapid recombination of photogenerated charge carriers.To overcome these constraints,this research focused on synthesizing novel TiO_(2)/Sn_(3)O_(4) heterojunction composite photocatalysts via a solvothermal approach.Comprehensive characterization techniques confirmed the successful formation of the composite,which revealed that ultrathin Sn3O4 nanosheets uniformly coated TiO_(2) nanospheres.This unique architecture effectively reduced the overall crystallinity and introduced the beneficial oxygen vacancies.Under visible-light irradiation(λ≥420 nm),the optimized TiO_(2)/Sn3O4 composite exhibited the exceptional photocatalytic performance,which achieved 96%degradation of MO within just 60 minutes.The calculated apparent kinetic rate constant(0.103 min^(-1))was remarkably(5.15 times)higher than that of pristine TiO_(2).ESR experiments identified that hydroxyl radicals(·OH)was the predominant active species driving the degradation.Furthermore,cyclic degradation tests demonstrated its excellent material stability,with the composite retaining 85%of its initial efficiency after four consecutive reuse cycles.This work underscored the synergistic effects within the TiO_(2)/Sn_(3)O_(4) heterojunction,which significantly enhanced the visible-light absorption,charge separation,and photocatalytic activity,which provided the valuable insights for designing efficient,stable catalysts for the advanced environmental remediation applications.展开更多
With growing concerns regarding electromagnetic pollution,low-cost,environmentally friendly,and high-performance electromagnetic wave absorption(EWA)materials have attracted significant attention.This paper reports on...With growing concerns regarding electromagnetic pollution,low-cost,environmentally friendly,and high-performance electromagnetic wave absorption(EWA)materials have attracted significant attention.This paper reports on the synthesis of porous Fe_(3)O_(4)/C composites that incorporate dielectric and magnetic loss mechanisms via the carbothermal reduction method and optimization of waste ratio to enhance EWA performance.The Fe_(3)O_(4)/C composites with 10wt%soybean residues(Fe_(3)O_(4)/C-10),demonstrated the best EWA performance,achieving the minimum reflection loss of−56.4 dB and a bandwidth of 2.14 GHz at a thickness of 2.23 mm.This enhanced EWA performance is primarily attributable to improved impedance matching and the synergistic effect between dielectric and magnetic losses.Furthermore,radar cross-sectional simulations confirmed the practical feasibility of the porous Fe_(3)O_(4)/C composites.This study proposes a viable strategy for utilizing soybean residue and electrolytic manganese residue,highlighting their potential applications in EWA.展开更多
To resolve severe slag penetration and erosion in Al_(2)O_(3)-SiC-C refractories during high scrap ratio iron ladle operation,a novel strategy utilizing exogenous MgAl_(2)O_(4) spinel as a sacrificial FeO_(x) scavenge...To resolve severe slag penetration and erosion in Al_(2)O_(3)-SiC-C refractories during high scrap ratio iron ladle operation,a novel strategy utilizing exogenous MgAl_(2)O_(4) spinel as a sacrificial FeO_(x) scavenger was proposed.Al_(2)O_(3)-SiC-C refractories produced with plate-like corundum,silicon carbide,and flake graphite incorporating MgAl_(2)O_(4) additives were cured at 1400℃ in the condition of carbon embedding.The impacts of additives on phase composition,microscopic morphology,and performance of materials were studied.The results indicated that Al_(2)O_(3)-SiC-C refractories with the addition of 2 wt.%MgAl_(2)O_(4) exhibited a smaller oxidation area after oxidation tests compared to samples without MgAl_(2)O_(4),resulting in 28%improvement in oxidation resistance compared to blank samples.In the erosion test,the results informed that adding 4 wt.%MgAl_(2)O_(4) induced significant interfacial slag modification:MgAl_(2)O_(4) dynamically dissolved FeO_(x) to form protective Mg(Fe,Al)_(2)O_(4) solid solution on the slag-refractory interface.This sacrificial dissolution effectively immobilized FeO_(x),elevated local slag viscosity,and fundamentally inhibited slag penetration and matrix dissolution.The erosion index decreased from 50%in the blank group to 27.4%.展开更多
文摘采用Co_(3)O_(4)吸附脱除模拟柴油中的喹啉、吡啶或苯胺,考察了最佳吸附温度、吸附时间等条件,同时进行了吸附热力学和动力学研究;基于第一性原理对Co_(3)O_(4)晶胞进行相分析,对3种氮化物进行最高占据分子轨道(HOMO)-最低未占据分子轨道(LUMO)分析,计算了吸附构型的吸附能和最稳定吸附构型的Mulliken电荷转移与电子密度。结果表明:在15 mL模拟柴油中加入0.6 g Co_(3)O_(4),苯胺、吡啶、喹啉的最佳吸附温度分别为20、20和30℃,最佳吸附时间分别为30、30、40 min,吸附容量由大到小顺序均为苯胺>吡啶>喹啉。热力学与动力学分析表明,喹啉、吡啶、苯胺的吸附均更符合多分子层吸附的Freundlich模型和准二级动力学方程。HOMO-LUMO分析结果表明,Co_(3)O_(4)为电子接受体,3种氮化物为电子给予体,Co_(3)O_(4)对喹啉、吡啶的配位吸附结构最稳定,对苯胺的π络合吸附最稳定。电荷转移计算表明,苯胺、吡啶、喹啉向Co_(3)O_(4)团簇转移的电荷数分别为0.423、0.394、0.368,说明Co_(3)O_(4)吸附3种氮化物的吸附能力大小为苯胺>吡啶>喹啉;电子密度图结果表明,最稳定吸附结构中Co_(3)O_(4)与3种氮化物均形成了化学键。
文摘In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prepared Fe_(3)O_(4)-MoS_(2)was characterized by X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectros-copy,Raman spectroscopy,magnetic hysteresis,and nitrogen adsorption-desorption isotherms.Experimental results indicate that,successful attachment of Fe_(3)O_(4)nanoparticles to MoS_(2)sheets has been achieved.The enhanced surface area of Fe_(3)O_(4)-MoS_(2)induced high rates of adsorption and the adsorbed tetracycline was degraded to 90%after 150 min of visible exposure,which is better than that from pure MoS_(2).The introduction of Fe_(3)O_(4)not only enhances the photo-catalytic performance of Fe_(3)O_(4)-MoS_(2),but also enables its convenient recovery from water by an external magnetic field.Furthermore,both the photocatalytic activity and composite phase of Fe_(3)O_(4)-MoS_(2)were well-retained over cy-cles.Owing to its efficient photocatalytic activity,good stability and magnetic recyclability,the Fe_(3)O_(4)-MoS_(2)nano-composite is considered to be a promising photocatalyst for wastewater treatment.
文摘The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsorption and biological degradation,are often hampered by low efficiency and the risk of secondary pollution.Photocatalysis emerges as a promising sustainable alternative;however,the benchmark material titanium dioxide(TiO_(2))suffers from its intrinsic limitations,notably its wide bandgap energy(≥3.4 eV)restricting its activity to the region of the ultraviolet light and its rapid recombination of photogenerated charge carriers.To overcome these constraints,this research focused on synthesizing novel TiO_(2)/Sn_(3)O_(4) heterojunction composite photocatalysts via a solvothermal approach.Comprehensive characterization techniques confirmed the successful formation of the composite,which revealed that ultrathin Sn3O4 nanosheets uniformly coated TiO_(2) nanospheres.This unique architecture effectively reduced the overall crystallinity and introduced the beneficial oxygen vacancies.Under visible-light irradiation(λ≥420 nm),the optimized TiO_(2)/Sn3O4 composite exhibited the exceptional photocatalytic performance,which achieved 96%degradation of MO within just 60 minutes.The calculated apparent kinetic rate constant(0.103 min^(-1))was remarkably(5.15 times)higher than that of pristine TiO_(2).ESR experiments identified that hydroxyl radicals(·OH)was the predominant active species driving the degradation.Furthermore,cyclic degradation tests demonstrated its excellent material stability,with the composite retaining 85%of its initial efficiency after four consecutive reuse cycles.This work underscored the synergistic effects within the TiO_(2)/Sn_(3)O_(4) heterojunction,which significantly enhanced the visible-light absorption,charge separation,and photocatalytic activity,which provided the valuable insights for designing efficient,stable catalysts for the advanced environmental remediation applications.
基金supported by the National Natural Science Foundation of China(No.52471221)the Natural Science Foundation of Hunan Province,China(No.2024JJ7145)the National Sustainable Development Agenda Innovation Demonstration Zone Hunan special project,China(No.2022sfq09).
文摘With growing concerns regarding electromagnetic pollution,low-cost,environmentally friendly,and high-performance electromagnetic wave absorption(EWA)materials have attracted significant attention.This paper reports on the synthesis of porous Fe_(3)O_(4)/C composites that incorporate dielectric and magnetic loss mechanisms via the carbothermal reduction method and optimization of waste ratio to enhance EWA performance.The Fe_(3)O_(4)/C composites with 10wt%soybean residues(Fe_(3)O_(4)/C-10),demonstrated the best EWA performance,achieving the minimum reflection loss of−56.4 dB and a bandwidth of 2.14 GHz at a thickness of 2.23 mm.This enhanced EWA performance is primarily attributable to improved impedance matching and the synergistic effect between dielectric and magnetic losses.Furthermore,radar cross-sectional simulations confirmed the practical feasibility of the porous Fe_(3)O_(4)/C composites.This study proposes a viable strategy for utilizing soybean residue and electrolytic manganese residue,highlighting their potential applications in EWA.
基金support from the project supported by the National Natural Science Foundation of China(Grant No.52402034)the Science and Technology Innovation Team Foundation of Hubei Province(Grant No.T2023001)+1 种基金the Natural Science Foundation of Hubei Province(Grant No.2023BAB106)the Natural Science Foundation of Wuhan(Grant No.2024040701010051).
文摘To resolve severe slag penetration and erosion in Al_(2)O_(3)-SiC-C refractories during high scrap ratio iron ladle operation,a novel strategy utilizing exogenous MgAl_(2)O_(4) spinel as a sacrificial FeO_(x) scavenger was proposed.Al_(2)O_(3)-SiC-C refractories produced with plate-like corundum,silicon carbide,and flake graphite incorporating MgAl_(2)O_(4) additives were cured at 1400℃ in the condition of carbon embedding.The impacts of additives on phase composition,microscopic morphology,and performance of materials were studied.The results indicated that Al_(2)O_(3)-SiC-C refractories with the addition of 2 wt.%MgAl_(2)O_(4) exhibited a smaller oxidation area after oxidation tests compared to samples without MgAl_(2)O_(4),resulting in 28%improvement in oxidation resistance compared to blank samples.In the erosion test,the results informed that adding 4 wt.%MgAl_(2)O_(4) induced significant interfacial slag modification:MgAl_(2)O_(4) dynamically dissolved FeO_(x) to form protective Mg(Fe,Al)_(2)O_(4) solid solution on the slag-refractory interface.This sacrificial dissolution effectively immobilized FeO_(x),elevated local slag viscosity,and fundamentally inhibited slag penetration and matrix dissolution.The erosion index decreased from 50%in the blank group to 27.4%.
